In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-f...In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.展开更多
The present study introduces a screw-pressing charging method to tackle deficiencies in automation and charge uniformity during the melt-casting of polymer-based energetic materials.To ensure the safety of the experim...The present study introduces a screw-pressing charging method to tackle deficiencies in automation and charge uniformity during the melt-casting of polymer-based energetic materials.To ensure the safety of the experiments,this study used inert materials with similar physical properties to partially substitute for the actual energetic components in the preparation of simulant materials.By thoroughly analyzing slurry physical properties,a simulation framework and an extensive performance evaluation method were developed.Such tools guide the design of the structure and configuration of process parameters.Results demonstrate that employing the Pin element significantly enhances radial mixing within the screw,minimizes temperature variations in the slurry,and improves both efficiency and safety in the mixing process.Further,adjustments such as widening the cone angle of the barrel,modifying the solid content of the slurry,and varying the speed of the screw can optimize the mechanical and thermal coupling in the flow field.These adjustments promote higher-quality slurry and create a safer production environment for the extrusion process.展开更多
To explore the design criteria for composite charges and reveal the intrinsic relationship between the detonation wave propagation in composite charges and the overall energy distribution of shock waves,this study ana...To explore the design criteria for composite charges and reveal the intrinsic relationship between the detonation wave propagation in composite charges and the overall energy distribution of shock waves,this study analyzes the propagation and interaction processes of detonation waves in composite charges with different structural dimensions and explosive combinations. It also investigates the spatial distribution characteristics of the resulting shock wave loads. Based on dimensional analysis theory, a theoretical analysis of the shock wave overpressure distribution in free air fields is conducted. Utilizing the derived dimensionless function relationships, the hydrocode AUTODYN is employed to investigate the effects of charge structure parameters and explosive combinations on the internal overdriven detonation phenomena and the distribution of shock wave loads. It is found that the overdriven detonation phenomenon in the inner layer of composite charges increases the strength of the axial detonation wave,thereby enhancing the intensity of the primary end wave formed upon refraction into the air, which affects the distribution characteristics of the shock wave overpressure. Research has shown that increasing the thickness ratio and detonation velocity ratio of composite charges is beneficial for exacerbating the phenomenon of overdriven detonation, improving the primary end wave intensity and axial overpressure. This gain effect gradually weakens with the propagation of shock waves. When overdriven detonation occurs inside the composite charge, the detonation pressure first increases and then decreases. The Mach reflection pressure of the composite charge with a larger aspect ratio is attenuated to a greater extent. In addition, as the aspect ratio of the composite charge increases, the shock wave energy gradually flows from the axial direction to the radial direction. Therefore, as the aspect ratio of the composite charge increases, the primary end wave intensity and axial overpressure gradually decrease.展开更多
To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based sim...To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based simulation(NNS)method with higher accuracy and better efficiency was proposed.The NNS method consisted of three main steps.First,the parameters of blast loads,including the peak pressures and impulses of cylindrical charges with different aspect ratios(L/D)at different stand-off distances and incident angles were obtained by two-dimensional numerical simulations.Subsequently,incident shape factors of cylindrical charges with arbitrary aspect ratios were predicted by a neural network.Finally,reflected shape factors were derived and implemented into the subroutine of the ABAQUS code to modify the CONWEP model,including modifications of impulse and overpressure.The reliability of the proposed NNS method was verified by related experimental results.Remarkable accuracy improvement was acquired by the proposed NNS method compared with the unmodified CONWEP model.Moreover,huge efficiency superiority was obtained by the proposed NNS method compared with the CEL method.The proposed NNS method showed good accuracy when the scaled distance was greater than 0.2 m/kg^(1/3).It should be noted that there is no need to generate a new dataset again since the blast loads satisfy the similarity law,and the proposed NNS method can be directly used to simulate the blast loads generated by different cylindrical charges.The proposed NNS method with high efficiency and accuracy can be used as an effective method to analyze the dynamic response of structures under blast loads,and it has significant application prospects in designing protective structures.展开更多
Efficient utilization of electrostatic charges is paramount for numerous applications,from printing to kinetic energy harvesting.However,existing technologies predominantly focus on the static qualities of these charg...Efficient utilization of electrostatic charges is paramount for numerous applications,from printing to kinetic energy harvesting.However,existing technologies predominantly focus on the static qualities of these charges,neglecting their dynamic capabilities as carriers for energy conversion.Herein,we report a paradigm-shifting strategy that orchestrates the swift transit of surface charges,generated through contact electrification,via a freely moving droplet.This technique ingeniously creates a bespoke charged surface which,in tandem with a droplet acting as a transfer medium to the ground,facilitates targeted charge displacement and amplifies electrical energy collection.The spontaneously generated electric field between the charged surface and needle tip,along with the enhanced water ionization under the electric field,proves pivotal in facilitating controlled charge transfer.By coupling the effects of charge self-transfer,contact electrification,and electrostatic induction,a dual-electrode droplet-driven(DD)triboelectric nanogenerator(TENG)is designed to harvest the water-related energy,exhibiting a two-orderof-magnitude improvement in electrical output compared to traditional single-electrode systems.Our strategy establishes a fundamental groundwork for efficient water drop energy acquisition,offering deep insights and substantial utility for future interdisciplinary research and applications in energy science.展开更多
This study calculates the combustion characteristics of various gas-generating and micro gas pyrotechnic charges,including aluminium/potassium perchlorate,boron/potassium nitrate,carbon black/potassium nitrate,and sil...This study calculates the combustion characteristics of various gas-generating and micro gas pyrotechnic charges,including aluminium/potassium perchlorate,boron/potassium nitrate,carbon black/potassium nitrate,and silicon-based delay compositions,using thermodynamic software.A multiphase flowthermal-solid coupling model was established,and the combustion process of the pyrotechnic charges within a closed bomb was simulated.The pyrotechnic shock generated by combustion was predicted.The combustion pressures and pyrotechnic shocks were measured.The simulation results demonstrated good agreement with experimental results.Additionally,the mechanism of shock generation by the combustion of pyrotechnic charges in the closed bomb was analyzed.The effects of the combustion characteristics of the pyrotechnic charges on the resulting pyrotechnic shocks were systematically investigated.Notably,the shock response spectrum of the gas-generating pyrotechnic charges is greater than that of the micro gas compositions at most frequencies,particularly in the mid-field pyrotechnic shocks(3-10 kHz).Furthermore,the pyrotechnic shocks increase approximately linearly with the impulse of the gas-generating pyrotechnic charges.展开更多
Most of the existing studies on tunnel blast wave are based on spherical or grouped charges, however,conventional weapons are mostly cylindrical rather than spherical. In order to analyze the impact of cylindrical cha...Most of the existing studies on tunnel blast wave are based on spherical or grouped charges, however,conventional weapons are mostly cylindrical rather than spherical. In order to analyze the impact of cylindrical charges on the tunnel blast wave loads and to develop a quantitative calculation method, this study carried out experimental and numerical research. Initially, external explosion experiments were conducted using both 35 kg spherical charges and cylindrical charges with aspect ratio of 4.8 at two different distances from the tunnel entrance. Comparative analysis of the blast wave parameters in the tunnel revealed that the explosive equivalent of the cylindrical charges was significantly higher than that of the spherical charges. To address this, an equivalent coefficient κ based on the spherical charges was proposed for the cylindrical charges. Subsequently, numerical simulations were conducted for the experimental conditions, and the numerical simulation results match the experiments well. Through numerical calculations, the reliability of the equivalent coefficient κ under the experimental conditions was verified, and comparison analysis indicated that the explosion energy of cylindrical charges spreads more radially, resulting in more explosion energy entering the tunnel, which is the fundamental reason for the increase in tunnel blast wave loads. Additionally, analyzing the explosion energy ratio entering the tunnel is an effective method for calculating the equivalent coefficient κ. Finally, through more than one hundred sets of numerical calculation results, the impact of the proportional distance λ and the ratio of charge mass to the tunnel cross-section dimension φ on the equivalence coefficients κ was investigated. An empirical formula for the equivalence coefficient κ was derived through fitting, and the accuracy of the formula was validated through literature experimental results. The research findings of this paper will provide valuable guidance for the calculation of blast wave loads in tunnel.展开更多
Non-Abelian topological insulators are characterized by matrix-valued,non-commuting topological charges with regard to more than one energy gap.Their descriptions go beyond the conventional topological band theory,in ...Non-Abelian topological insulators are characterized by matrix-valued,non-commuting topological charges with regard to more than one energy gap.Their descriptions go beyond the conventional topological band theory,in which an additive integer like the winding or Chern number is endowed separately with each(degenerate group of)energy band(s).In this work,we reveal that Floquet(time-periodic)driving could not only enrich the topology and phase transitions of non-Abelian topological matter,but also induce bulk-edge correspondence unique to nonequilibrium setups.Using a one-dimensional,three-band model as an illustrative example,we demonstrate that Floquet driving could reshuffle the phase diagram of the non-driven system,yielding both gapped and gapless Floquet band structures with non-Abelian topological charges.Moreover,by dynamically tuning the anomalous Floquet π-quasienergy gap,non-Abelian topological transitions inaccessible to static systems could arise,leading to much more complicated relations between non-Abelian topological charges and Floquet edge states.These discoveries put forth periodic driving as a powerful scheme of engineering non-Abelian topological phases and incubating unique non-Abelian band topology beyond equilibrium.展开更多
This paper presents the design of a low-power multi-channel analog front-end(AFE) for bio-potential recording. By using time division multiplexing(TDM), a successive approximation register analog-to-digital converter(...This paper presents the design of a low-power multi-channel analog front-end(AFE) for bio-potential recording. By using time division multiplexing(TDM), a successive approximation register analog-to-digital converter(SAR ADC) is shared among all 20 channels. A charge-sharing multiplexer(MUX) is proposed to transmit the output signals from the respective channels to the ADC. By separately pre sampling the output of each channel, the sampling time of each channel is greatly extended and additional active buffers are avoided. The AFE is fabricated in a 65-nm CMOS process, and the whole system consumes 28.2 μW under 1 V supply. Each analog acquisition channel consumes 1.25 μW and occupies a chip area of 0.14 mm2. Measurement results show that the AFE achieves an input referred noise of 1.8 μV·rms in a 350 Hz bandwidth and a noise efficiency factor(NEF) of 4.1. The 12-bit SAR ADC achieves an ENOB of 9.8 bit operating at 25 k S/s. The AFE is experimented on real-world applications by measuring human ECG and a clear ECG waveform is captured.展开更多
The axial uncoupling coefficient and air deck effect in blasting significantly influence the effectiveness of rock fragmentation.This study employs a passive confinement device to conduct continuous charge and five di...The axial uncoupling coefficient and air deck effect in blasting significantly influence the effectiveness of rock fragmentation.This study employs a passive confinement device to conduct continuous charge and five different axial uncoupling coefficient blasting ex-periments on cylindrical iron ore samples to explain the rock-breaking mechanisms associated with various axial uncoupling coefficientsand air deck effects. It utilizes advanced techniques such as computer tomography(CT) scanning, deep learning, and three dimensional(3D) model reconstruction, to generate a 3D reconstruction model of “rock explosion cracks” under varying axial uncoupling coefficients.This model illustrates the spatial distribution and configurations of explosion cracks. Integrating box-counting dimension and fractal di-mension theories enables the quantitative analysis of the three-dimensional fracture field and the extent of damage in rocks subjected toexplosive forces. Laboratory 3D experimental results indicate that continuous charging produces the most extensive damage, while a un-coupling coefficient of 1.50(case 1) results in the least. A moderate air deck length enhances blasting effectiveness and rock fragmenta-tion. For identical charge quantities. In contrast, increasing the charge amount with a constant air deck length further augments rock frag-mentation. A rock blasting calculation model was developed using LS-DYNA numerical simulation software under various axial uncoup-ling coefficients. This model depicts the dynamic damage evolution characteristics of the rocks and variations in hole wall pressure. Thenumerical simulation results of cumulative rock damage align with the laboratory findings. In addition, increasing the air deck length re-duces the peak of the explosion shock wave, decreasing the peak pressure in the charge and air sections by 37.8% to 66.3%. These re-search outcomes provide valuable theoretical support for designing and optimizing axial uncoupling coefficients in practical applications.展开更多
Topological insulators represent a new phase of matter,characterized by conductive surfaces,while their bulk remains insulating.When the dimension of the system exceeds that of the topological state by at least two,th...Topological insulators represent a new phase of matter,characterized by conductive surfaces,while their bulk remains insulating.When the dimension of the system exceeds that of the topological state by at least two,the insulators are classified as higher-order topological insulators(HOTI).The appearance of higher-order topological states,such as corner states,can be explained by the filling anomaly,which leads to the fractional spectral charges in the unit cell.Previously reported fractional charges have been quite limited in number and size.In this work,based on the two-dimensional(2D)Su-Schrieffer-Heeger model lattice,we demonstrated a new class of HOTIs with adjustable fractional charges that can take any value ranging from 0 to 1,achieved by utilizing the Lorentz transformation.Furthermore,this transformation generates novel bound-state-in-continuum-like corner states,even when the lattice is in a topological trivial phase,offering a new approach to light beam localization.This work paves the way for fabricating HOTIs with diverse corner states that offer promising applicative potential.展开更多
The space charge effect (SCE) of static induction transistor (SIT) that occurs in high current region is systematically studied.The I V equations are deduced and well agree with experimental results.Two kinds of ...The space charge effect (SCE) of static induction transistor (SIT) that occurs in high current region is systematically studied.The I V equations are deduced and well agree with experimental results.Two kinds of barriers are presented in SIT,corresponding to channel voltage barrier control (CVBC) mechanism and space charge limited control (SCLC) mechanism respectively.With the increase of drain voltage,the gradual transferring of operational mechanism from CVBC to SCLC is demonstrated.It points out that CVBC mechanism and its contest relationship with space charge barrier makes the SIT distinctly differentiated from JFET and triode devices,etc.The contest relationship of the two potential barriers also results in three different working regions,which are distinctly marked and analyzed.Furthermore,the extreme importance of grid voltage on SCE is illustrated.展开更多
Fluorescent probes based on intramolecular charge transfer(ICT) have obvious advantages for accurate quantitative analysis.To obtain high-performance ratiometric probes requires distinct photophysical properties durin...Fluorescent probes based on intramolecular charge transfer(ICT) have obvious advantages for accurate quantitative analysis.To obtain high-performance ratiometric probes requires distinct photophysical properties during recognition reaction process,which is closely related to their ICT characteristics.1,8-Naphthalimide is known as a typical fluorophore with desirable ICT property when functionalized with an electron-donating moiety at the para-position of the naphthalene chromophore.Although the photophysical properties of para-substituted 1,8-naphthalimide have been well studied,its meta-substituted counterpart has not been fully evaluated since the meta-position is conventionally thought to be weakly conjugated.Herein,combined experimental and theoretical studies are performed which consistently indicate that stronger charge transfer(CT) is exhibited by the meta-amino substituted 1,8-naphthalimide(m-NH_(2)) compared to the para-amino substituted one(p-NH_(2)).The ratiometric response of fluorescence with significant changes in wavelength and intensity upon acetylation(m-NAc and p-NAc) can be attributed to the larger ICT and stronger-NH_(2) vibrations.This observation is further demonstrated by deuterium oxide experiments,viscosity experiments and quantum chemical calculations.The practical application of meta-amino-1,8-naphthalimide ICT-based probes is also confirmed.This research is expected to bring an in-depth understanding of π-conjugated systems with ICT characteristics,and facilitates the design of sensitive ICT fluorescent probes with meta-amino substitution.展开更多
The longitudinal π-extension of carbon nanohoops is one of the most effective bottom-up synthetic strategies toward carbon nanotubes(CNTs).Herein,the precise synthesis of a multi-substituted carbon nanohoop([12]CPP-8...The longitudinal π-extension of carbon nanohoops is one of the most effective bottom-up synthetic strategies toward carbon nanotubes(CNTs).Herein,the precise synthesis of a multi-substituted carbon nanohoop([12]CPP-8PBPy)based on cycloparaphenylenes(CPPs)grafted with eight pyrene-functionalized units was reported.This structurally well-defined nanohoop not only acts as a segment of armchair-type CNTs but also achieves enhanced longitudinal π-extension.The structure of[12]CPP-8PBPy was confirmed by high-resolution mass spectrometry(HRMS)and nuclear magnetic resonance(NMR).The photophysical properties were studied by UV/Vis and photoluminescence spectroscopy.The potential applications of[12]CPP-8PBPy in electron-transport devices were further investigated.展开更多
In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar perce...In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.展开更多
High-performance deep-blue emitters that meet the BT.2020 standard proposed by the International Telecommunication Union(ITU)for organic light-emitting diodes(OLEDs)remain highly limited.In this work,four deep-blue em...High-performance deep-blue emitters that meet the BT.2020 standard proposed by the International Telecommunication Union(ITU)for organic light-emitting diodes(OLEDs)remain highly limited.In this work,four deep-blue emitters,PP1M,PP2M,PP3M,and PP4M,are designed and synthesized by connecting methylsubstituted biphenyl groups with classical hot exciton building block of phenanthreneimidazole.The introduction of methyl groups contributes to increase the molecular torsion angle and widen the energy gaps for the four compounds.Through appropriate modulation of substitution site,PP3M achieves the highest photoluminescence quantum yield of 85.3%in neat film.As a result,the PP3M-based device exhibits deep-blue light with external quantum efficiency of 7.2%and suppressed efficiency roll-off.The device also shows a small full width at half maximum of 53 nm and the CIE coordinates locate at(0.16,0.04),meeting well with the BT.2020 standard.The high exciton utilization efficiency is primarily ascribed to the hot exciton pathway.This study provides a reliable insight for the design of efficient deep-blue OLEDs with high color purity.展开更多
Rapid evolutions of the Internet of Electric Vehicles(IoEVs)are reshaping and modernizing transport systems,yet challenges remain in energy efficiency,better battery aging,and grid stability.Typical charging methods a...Rapid evolutions of the Internet of Electric Vehicles(IoEVs)are reshaping and modernizing transport systems,yet challenges remain in energy efficiency,better battery aging,and grid stability.Typical charging methods allow for EVs to be charged without thought being given to the condition of the battery or the grid demand,thus increasing energy costs and battery aging.This study proposes a smart charging station with an AI-powered Battery Management System(BMS),developed and simulated in MATLAB/Simulink,to increase optimality in energy flow,battery health,and impractical scheduling within the IoEV environment.The system operates through real-time communication,load scheduling based on priorities,and adaptive charging based on batterymathematically computed State of Charge(SOC),State of Health(SOH),and thermal state,with bidirectional power flow(V2G),thus allowing EVs’participation towards grid stabilization.Simulation results revealed that the proposed model can reduce peak grid load by 37.8%;charging efficiency is enhanced by 92.6%;battery temperature lessened by 4.4℃;SOH extended over 100 cycles by 6.5%,if compared against the conventional technique.By this way,charging time was decreased by 12.4% and energy costs dropped by more than 20%.These results showed that smart charging with intelligent BMS can boost greatly the operational efficiency and sustainability of the IoEV ecosystem.展开更多
A deep neural network(DNN)was developed to accurately predict the nuclear charge density distributions for nuclei with proton numbers Z≥8.By incorporating essential nuclear structure features,the model achieved a sig...A deep neural network(DNN)was developed to accurately predict the nuclear charge density distributions for nuclei with proton numbers Z≥8.By incorporating essential nuclear structure features,the model achieved a significant improvement in predictive accuracy over conventional methods.The charge density distributions were analyzed using a Fourier-Bessel(FB)series expansion,and the DNN was trained on a comprehensive dataset derived from relativistic continuum Hartree-Bogoliubov(RCHB)theory calculations.The model demonstrated exceptional performance,with root-mean-square deviations of 0.0123fm and 0.0198 fm for the charge radii on the training and validation sets,respectively,which remarkably surpassed the precision of the original RCHB calculations.In addition to advancing nuclear physics research,this high-precision model provides critical data for applications in atomic physics,nuclear astrophysics,and related fields.展开更多
In conventional higher-order topological insulators(HOTIs),the emergence of topological states can be explained by using the nonzero bulk polarization index.However,corner states emerge in HOTIs with incomplete bounda...In conventional higher-order topological insulators(HOTIs),the emergence of topological states can be explained by using the nonzero bulk polarization index.However,corner states emerge in HOTIs with incomplete boundary unit cells(i.e.,boundary defects)even though the bulk polarization is zero,which challenges the conventional understanding of HOTIs.Here,based on a Kekul´e-distorted honeycomb lattice with incomplete unit cells,we reveal that incomplete unit cells exhibit fractional charges through the analysis of Wannier centers by developing a compensation method and creating the concept of Wannier center domain(WCD)which is the smallest region that one Wannier center occupies.This method compensates for the missing parts of these boundary incomplete unit cells with additional WCDs to make them complete.The compensated WCDs automatically carry the corresponding charge,and this charge together with that of the incomplete unit cell constitutes the total charge of the complete unit cell after compensation.We conclude that the emergence of corner states is attributed to the filling anomaly,which is a fundamental mechanism.Our results refresh the understanding of HOTIs,especially those with structural discontinuities,and provide a novel design for topological states which have application value in producing optical functional devices.展开更多
https://www.sciencedirect.com/journal/energy-and-buildings/vol/354/suppl/C Volume 354,1 March 2026[OA](1)Rule-based peak shaving strategy with battery storage:Evaluating socio-economic impacts in regional grids by Md ...https://www.sciencedirect.com/journal/energy-and-buildings/vol/354/suppl/C Volume 354,1 March 2026[OA](1)Rule-based peak shaving strategy with battery storage:Evaluating socio-economic impacts in regional grids by Md Masud Rana,Huadong Mo,Mohd Fakhizan Romlie,et al,Article 116983 Abstract:The Australian electricity framework includes several demand tariff structures,with peak demand charges constituting a significant cost component for consumers.Efficient peak load shaving techniques can mitigate these charges,leading to substantial economic benefits to the power suppliers,consumers,and society.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.52271307,52061135107,52192692,11802025)the Liao Ning Excellent Youth Fund Program(Grant No.2023JH3/10200012)+1 种基金the Liao Ning Revitalization Tal-ents Program(Grant No.XLYC1908027)the Fundamental Research Funds for the Central Universities(Grant Nos.DUT20RC(3)025,DUT20TD108,DUT20LAB308)。
文摘In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.
基金financially supported by the Fundamental Research Funds for the Central Universities(Grant No.30923011018)。
文摘The present study introduces a screw-pressing charging method to tackle deficiencies in automation and charge uniformity during the melt-casting of polymer-based energetic materials.To ensure the safety of the experiments,this study used inert materials with similar physical properties to partially substitute for the actual energetic components in the preparation of simulant materials.By thoroughly analyzing slurry physical properties,a simulation framework and an extensive performance evaluation method were developed.Such tools guide the design of the structure and configuration of process parameters.Results demonstrate that employing the Pin element significantly enhances radial mixing within the screw,minimizes temperature variations in the slurry,and improves both efficiency and safety in the mixing process.Further,adjustments such as widening the cone angle of the barrel,modifying the solid content of the slurry,and varying the speed of the screw can optimize the mechanical and thermal coupling in the flow field.These adjustments promote higher-quality slurry and create a safer production environment for the extrusion process.
基金funded by the National Natural Science Foundation of China(Grant No. 12302437)Jiangsu Provincial Natural Science Foundation (Grant No.SBK2023045424)。
文摘To explore the design criteria for composite charges and reveal the intrinsic relationship between the detonation wave propagation in composite charges and the overall energy distribution of shock waves,this study analyzes the propagation and interaction processes of detonation waves in composite charges with different structural dimensions and explosive combinations. It also investigates the spatial distribution characteristics of the resulting shock wave loads. Based on dimensional analysis theory, a theoretical analysis of the shock wave overpressure distribution in free air fields is conducted. Utilizing the derived dimensionless function relationships, the hydrocode AUTODYN is employed to investigate the effects of charge structure parameters and explosive combinations on the internal overdriven detonation phenomena and the distribution of shock wave loads. It is found that the overdriven detonation phenomenon in the inner layer of composite charges increases the strength of the axial detonation wave,thereby enhancing the intensity of the primary end wave formed upon refraction into the air, which affects the distribution characteristics of the shock wave overpressure. Research has shown that increasing the thickness ratio and detonation velocity ratio of composite charges is beneficial for exacerbating the phenomenon of overdriven detonation, improving the primary end wave intensity and axial overpressure. This gain effect gradually weakens with the propagation of shock waves. When overdriven detonation occurs inside the composite charge, the detonation pressure first increases and then decreases. The Mach reflection pressure of the composite charge with a larger aspect ratio is attenuated to a greater extent. In addition, as the aspect ratio of the composite charge increases, the shock wave energy gradually flows from the axial direction to the radial direction. Therefore, as the aspect ratio of the composite charge increases, the primary end wave intensity and axial overpressure gradually decrease.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52271317 and 52071149)the Fundamental Research Funds for the Central Universities(HUST:2019kfy XJJS007)。
文摘To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based simulation(NNS)method with higher accuracy and better efficiency was proposed.The NNS method consisted of three main steps.First,the parameters of blast loads,including the peak pressures and impulses of cylindrical charges with different aspect ratios(L/D)at different stand-off distances and incident angles were obtained by two-dimensional numerical simulations.Subsequently,incident shape factors of cylindrical charges with arbitrary aspect ratios were predicted by a neural network.Finally,reflected shape factors were derived and implemented into the subroutine of the ABAQUS code to modify the CONWEP model,including modifications of impulse and overpressure.The reliability of the proposed NNS method was verified by related experimental results.Remarkable accuracy improvement was acquired by the proposed NNS method compared with the unmodified CONWEP model.Moreover,huge efficiency superiority was obtained by the proposed NNS method compared with the CEL method.The proposed NNS method showed good accuracy when the scaled distance was greater than 0.2 m/kg^(1/3).It should be noted that there is no need to generate a new dataset again since the blast loads satisfy the similarity law,and the proposed NNS method can be directly used to simulate the blast loads generated by different cylindrical charges.The proposed NNS method with high efficiency and accuracy can be used as an effective method to analyze the dynamic response of structures under blast loads,and it has significant application prospects in designing protective structures.
基金supported by the Natural Science Foundation of Zhejiang Province(LZ22C130001)the National Natural Science Foundation of China(32171887,and 52002028,and 52192610)+1 种基金the National Key Research and Development Project from Minister of Science&Technology(2021YFA0202704)Beijing Municipal Science&Technology Commission(Z171100002017017).
文摘Efficient utilization of electrostatic charges is paramount for numerous applications,from printing to kinetic energy harvesting.However,existing technologies predominantly focus on the static qualities of these charges,neglecting their dynamic capabilities as carriers for energy conversion.Herein,we report a paradigm-shifting strategy that orchestrates the swift transit of surface charges,generated through contact electrification,via a freely moving droplet.This technique ingeniously creates a bespoke charged surface which,in tandem with a droplet acting as a transfer medium to the ground,facilitates targeted charge displacement and amplifies electrical energy collection.The spontaneously generated electric field between the charged surface and needle tip,along with the enhanced water ionization under the electric field,proves pivotal in facilitating controlled charge transfer.By coupling the effects of charge self-transfer,contact electrification,and electrostatic induction,a dual-electrode droplet-driven(DD)triboelectric nanogenerator(TENG)is designed to harvest the water-related energy,exhibiting a two-orderof-magnitude improvement in electrical output compared to traditional single-electrode systems.Our strategy establishes a fundamental groundwork for efficient water drop energy acquisition,offering deep insights and substantial utility for future interdisciplinary research and applications in energy science.
文摘This study calculates the combustion characteristics of various gas-generating and micro gas pyrotechnic charges,including aluminium/potassium perchlorate,boron/potassium nitrate,carbon black/potassium nitrate,and silicon-based delay compositions,using thermodynamic software.A multiphase flowthermal-solid coupling model was established,and the combustion process of the pyrotechnic charges within a closed bomb was simulated.The pyrotechnic shock generated by combustion was predicted.The combustion pressures and pyrotechnic shocks were measured.The simulation results demonstrated good agreement with experimental results.Additionally,the mechanism of shock generation by the combustion of pyrotechnic charges in the closed bomb was analyzed.The effects of the combustion characteristics of the pyrotechnic charges on the resulting pyrotechnic shocks were systematically investigated.Notably,the shock response spectrum of the gas-generating pyrotechnic charges is greater than that of the micro gas compositions at most frequencies,particularly in the mid-field pyrotechnic shocks(3-10 kHz).Furthermore,the pyrotechnic shocks increase approximately linearly with the impulse of the gas-generating pyrotechnic charges.
文摘Most of the existing studies on tunnel blast wave are based on spherical or grouped charges, however,conventional weapons are mostly cylindrical rather than spherical. In order to analyze the impact of cylindrical charges on the tunnel blast wave loads and to develop a quantitative calculation method, this study carried out experimental and numerical research. Initially, external explosion experiments were conducted using both 35 kg spherical charges and cylindrical charges with aspect ratio of 4.8 at two different distances from the tunnel entrance. Comparative analysis of the blast wave parameters in the tunnel revealed that the explosive equivalent of the cylindrical charges was significantly higher than that of the spherical charges. To address this, an equivalent coefficient κ based on the spherical charges was proposed for the cylindrical charges. Subsequently, numerical simulations were conducted for the experimental conditions, and the numerical simulation results match the experiments well. Through numerical calculations, the reliability of the equivalent coefficient κ under the experimental conditions was verified, and comparison analysis indicated that the explosion energy of cylindrical charges spreads more radially, resulting in more explosion energy entering the tunnel, which is the fundamental reason for the increase in tunnel blast wave loads. Additionally, analyzing the explosion energy ratio entering the tunnel is an effective method for calculating the equivalent coefficient κ. Finally, through more than one hundred sets of numerical calculation results, the impact of the proportional distance λ and the ratio of charge mass to the tunnel cross-section dimension φ on the equivalence coefficients κ was investigated. An empirical formula for the equivalence coefficient κ was derived through fitting, and the accuracy of the formula was validated through literature experimental results. The research findings of this paper will provide valuable guidance for the calculation of blast wave loads in tunnel.
基金supported by the National Natural Science Foundation of China(Grant Nos.12275260 and 11905211)the Fundamental Research Funds for the Central Universities(Grant No.202364008)the Young Talents Project of Ocean University of China。
文摘Non-Abelian topological insulators are characterized by matrix-valued,non-commuting topological charges with regard to more than one energy gap.Their descriptions go beyond the conventional topological band theory,in which an additive integer like the winding or Chern number is endowed separately with each(degenerate group of)energy band(s).In this work,we reveal that Floquet(time-periodic)driving could not only enrich the topology and phase transitions of non-Abelian topological matter,but also induce bulk-edge correspondence unique to nonequilibrium setups.Using a one-dimensional,three-band model as an illustrative example,we demonstrate that Floquet driving could reshuffle the phase diagram of the non-driven system,yielding both gapped and gapless Floquet band structures with non-Abelian topological charges.Moreover,by dynamically tuning the anomalous Floquet π-quasienergy gap,non-Abelian topological transitions inaccessible to static systems could arise,leading to much more complicated relations between non-Abelian topological charges and Floquet edge states.These discoveries put forth periodic driving as a powerful scheme of engineering non-Abelian topological phases and incubating unique non-Abelian band topology beyond equilibrium.
基金supported by the National Key R&D Program of China under Grant 2018YFA0701400 and 2018YFA0701401.
文摘This paper presents the design of a low-power multi-channel analog front-end(AFE) for bio-potential recording. By using time division multiplexing(TDM), a successive approximation register analog-to-digital converter(SAR ADC) is shared among all 20 channels. A charge-sharing multiplexer(MUX) is proposed to transmit the output signals from the respective channels to the ADC. By separately pre sampling the output of each channel, the sampling time of each channel is greatly extended and additional active buffers are avoided. The AFE is fabricated in a 65-nm CMOS process, and the whole system consumes 28.2 μW under 1 V supply. Each analog acquisition channel consumes 1.25 μW and occupies a chip area of 0.14 mm2. Measurement results show that the AFE achieves an input referred noise of 1.8 μV·rms in a 350 Hz bandwidth and a noise efficiency factor(NEF) of 4.1. The 12-bit SAR ADC achieves an ENOB of 9.8 bit operating at 25 k S/s. The AFE is experimented on real-world applications by measuring human ECG and a clear ECG waveform is captured.
基金financially supported by the National Natural Science Foundation of China (No. 52227805)the Fundamental Research Funds for the Central Universities (Ph.D. Top Innovative Talents Fund of China University of Mining and Technology Beijing) (No. BBJ2024085)the National Natural Science Foundation of China (Nos. 52474026 and 52208384)。
文摘The axial uncoupling coefficient and air deck effect in blasting significantly influence the effectiveness of rock fragmentation.This study employs a passive confinement device to conduct continuous charge and five different axial uncoupling coefficient blasting ex-periments on cylindrical iron ore samples to explain the rock-breaking mechanisms associated with various axial uncoupling coefficientsand air deck effects. It utilizes advanced techniques such as computer tomography(CT) scanning, deep learning, and three dimensional(3D) model reconstruction, to generate a 3D reconstruction model of “rock explosion cracks” under varying axial uncoupling coefficients.This model illustrates the spatial distribution and configurations of explosion cracks. Integrating box-counting dimension and fractal di-mension theories enables the quantitative analysis of the three-dimensional fracture field and the extent of damage in rocks subjected toexplosive forces. Laboratory 3D experimental results indicate that continuous charging produces the most extensive damage, while a un-coupling coefficient of 1.50(case 1) results in the least. A moderate air deck length enhances blasting effectiveness and rock fragmenta-tion. For identical charge quantities. In contrast, increasing the charge amount with a constant air deck length further augments rock frag-mentation. A rock blasting calculation model was developed using LS-DYNA numerical simulation software under various axial uncoup-ling coefficients. This model depicts the dynamic damage evolution characteristics of the rocks and variations in hole wall pressure. Thenumerical simulation results of cumulative rock damage align with the laboratory findings. In addition, increasing the air deck length re-duces the peak of the explosion shock wave, decreasing the peak pressure in the charge and air sections by 37.8% to 66.3%. These re-search outcomes provide valuable theoretical support for designing and optimizing axial uncoupling coefficients in practical applications.
基金supported by the Natural Science Basic Research Program of Shaanxi Province(No.2024JC-JCQN-06)the National Natural Science Foundation of China(Nos.12474337,12304370)Fundamental Research Funds for the Central Universities(No.xzy012024135).
文摘Topological insulators represent a new phase of matter,characterized by conductive surfaces,while their bulk remains insulating.When the dimension of the system exceeds that of the topological state by at least two,the insulators are classified as higher-order topological insulators(HOTI).The appearance of higher-order topological states,such as corner states,can be explained by the filling anomaly,which leads to the fractional spectral charges in the unit cell.Previously reported fractional charges have been quite limited in number and size.In this work,based on the two-dimensional(2D)Su-Schrieffer-Heeger model lattice,we demonstrated a new class of HOTIs with adjustable fractional charges that can take any value ranging from 0 to 1,achieved by utilizing the Lorentz transformation.Furthermore,this transformation generates novel bound-state-in-continuum-like corner states,even when the lattice is in a topological trivial phase,offering a new approach to light beam localization.This work paves the way for fabricating HOTIs with diverse corner states that offer promising applicative potential.
文摘The space charge effect (SCE) of static induction transistor (SIT) that occurs in high current region is systematically studied.The I V equations are deduced and well agree with experimental results.Two kinds of barriers are presented in SIT,corresponding to channel voltage barrier control (CVBC) mechanism and space charge limited control (SCLC) mechanism respectively.With the increase of drain voltage,the gradual transferring of operational mechanism from CVBC to SCLC is demonstrated.It points out that CVBC mechanism and its contest relationship with space charge barrier makes the SIT distinctly differentiated from JFET and triode devices,etc.The contest relationship of the two potential barriers also results in three different working regions,which are distinctly marked and analyzed.Furthermore,the extreme importance of grid voltage on SCE is illustrated.
基金financially supported by National Key Research and Development Programs (Nos.2022YFD1700403 and 2023YFD1700303)National Natural Science Foundation of China (Nos.12274128 and 12250003)+2 种基金Shanghai Rising-Star Program (No.21QA1402600)the support of NYU-ECNU Center for Computational Chemistry at NYU Shanghaithe University of Bath and the Open Research Fund of the School of Chemistry and Chemical Engineering,Henan Normal University (No.2020ZD01) for support。
文摘Fluorescent probes based on intramolecular charge transfer(ICT) have obvious advantages for accurate quantitative analysis.To obtain high-performance ratiometric probes requires distinct photophysical properties during recognition reaction process,which is closely related to their ICT characteristics.1,8-Naphthalimide is known as a typical fluorophore with desirable ICT property when functionalized with an electron-donating moiety at the para-position of the naphthalene chromophore.Although the photophysical properties of para-substituted 1,8-naphthalimide have been well studied,its meta-substituted counterpart has not been fully evaluated since the meta-position is conventionally thought to be weakly conjugated.Herein,combined experimental and theoretical studies are performed which consistently indicate that stronger charge transfer(CT) is exhibited by the meta-amino substituted 1,8-naphthalimide(m-NH_(2)) compared to the para-amino substituted one(p-NH_(2)).The ratiometric response of fluorescence with significant changes in wavelength and intensity upon acetylation(m-NAc and p-NAc) can be attributed to the larger ICT and stronger-NH_(2) vibrations.This observation is further demonstrated by deuterium oxide experiments,viscosity experiments and quantum chemical calculations.The practical application of meta-amino-1,8-naphthalimide ICT-based probes is also confirmed.This research is expected to bring an in-depth understanding of π-conjugated systems with ICT characteristics,and facilitates the design of sensitive ICT fluorescent probes with meta-amino substitution.
文摘The longitudinal π-extension of carbon nanohoops is one of the most effective bottom-up synthetic strategies toward carbon nanotubes(CNTs).Herein,the precise synthesis of a multi-substituted carbon nanohoop([12]CPP-8PBPy)based on cycloparaphenylenes(CPPs)grafted with eight pyrene-functionalized units was reported.This structurally well-defined nanohoop not only acts as a segment of armchair-type CNTs but also achieves enhanced longitudinal π-extension.The structure of[12]CPP-8PBPy was confirmed by high-resolution mass spectrometry(HRMS)and nuclear magnetic resonance(NMR).The photophysical properties were studied by UV/Vis and photoluminescence spectroscopy.The potential applications of[12]CPP-8PBPy in electron-transport devices were further investigated.
基金Supported by the Doctoral Research Start-up Project of Yuncheng University(YQ-2023067)Project of Shanxi Natural Science Foundation(202303021211189)+1 种基金Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Provinces(20220036)Shanxi ProvinceIntelligent Optoelectronic Sensing Application Technology Innovation Center and Shanxi Province Optoelectronic Information Science and TechnologyLaboratory,Yuncheng University.
文摘In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.
文摘High-performance deep-blue emitters that meet the BT.2020 standard proposed by the International Telecommunication Union(ITU)for organic light-emitting diodes(OLEDs)remain highly limited.In this work,four deep-blue emitters,PP1M,PP2M,PP3M,and PP4M,are designed and synthesized by connecting methylsubstituted biphenyl groups with classical hot exciton building block of phenanthreneimidazole.The introduction of methyl groups contributes to increase the molecular torsion angle and widen the energy gaps for the four compounds.Through appropriate modulation of substitution site,PP3M achieves the highest photoluminescence quantum yield of 85.3%in neat film.As a result,the PP3M-based device exhibits deep-blue light with external quantum efficiency of 7.2%and suppressed efficiency roll-off.The device also shows a small full width at half maximum of 53 nm and the CIE coordinates locate at(0.16,0.04),meeting well with the BT.2020 standard.The high exciton utilization efficiency is primarily ascribed to the hot exciton pathway.This study provides a reliable insight for the design of efficient deep-blue OLEDs with high color purity.
文摘Rapid evolutions of the Internet of Electric Vehicles(IoEVs)are reshaping and modernizing transport systems,yet challenges remain in energy efficiency,better battery aging,and grid stability.Typical charging methods allow for EVs to be charged without thought being given to the condition of the battery or the grid demand,thus increasing energy costs and battery aging.This study proposes a smart charging station with an AI-powered Battery Management System(BMS),developed and simulated in MATLAB/Simulink,to increase optimality in energy flow,battery health,and impractical scheduling within the IoEV environment.The system operates through real-time communication,load scheduling based on priorities,and adaptive charging based on batterymathematically computed State of Charge(SOC),State of Health(SOH),and thermal state,with bidirectional power flow(V2G),thus allowing EVs’participation towards grid stabilization.Simulation results revealed that the proposed model can reduce peak grid load by 37.8%;charging efficiency is enhanced by 92.6%;battery temperature lessened by 4.4℃;SOH extended over 100 cycles by 6.5%,if compared against the conventional technique.By this way,charging time was decreased by 12.4% and energy costs dropped by more than 20%.These results showed that smart charging with intelligent BMS can boost greatly the operational efficiency and sustainability of the IoEV ecosystem.
基金the National Natural Science Foundation of China(No.12475119)the Key Laboratory of Nuclear Data Foundation(JCKY2025201C154)the JSPS Grant-in-Aid for Scientific Research(S)(No.20H05648)。
文摘A deep neural network(DNN)was developed to accurately predict the nuclear charge density distributions for nuclei with proton numbers Z≥8.By incorporating essential nuclear structure features,the model achieved a significant improvement in predictive accuracy over conventional methods.The charge density distributions were analyzed using a Fourier-Bessel(FB)series expansion,and the DNN was trained on a comprehensive dataset derived from relativistic continuum Hartree-Bogoliubov(RCHB)theory calculations.The model demonstrated exceptional performance,with root-mean-square deviations of 0.0123fm and 0.0198 fm for the charge radii on the training and validation sets,respectively,which remarkably surpassed the precision of the original RCHB calculations.In addition to advancing nuclear physics research,this high-precision model provides critical data for applications in atomic physics,nuclear astrophysics,and related fields.
基金supported by the Natural Science Basic Research Program of Shaanxi Province (Grant Nos.2024JC-JCQN-06 and2025JC-QYCX-006)the National Natural Science Foundation of China (Grant No.12474337)Chinese Academy of Sciences Project (Grant Nos.E4BA270100,E4Z127010F,E4Z6270100,and E53327020D)。
文摘In conventional higher-order topological insulators(HOTIs),the emergence of topological states can be explained by using the nonzero bulk polarization index.However,corner states emerge in HOTIs with incomplete boundary unit cells(i.e.,boundary defects)even though the bulk polarization is zero,which challenges the conventional understanding of HOTIs.Here,based on a Kekul´e-distorted honeycomb lattice with incomplete unit cells,we reveal that incomplete unit cells exhibit fractional charges through the analysis of Wannier centers by developing a compensation method and creating the concept of Wannier center domain(WCD)which is the smallest region that one Wannier center occupies.This method compensates for the missing parts of these boundary incomplete unit cells with additional WCDs to make them complete.The compensated WCDs automatically carry the corresponding charge,and this charge together with that of the incomplete unit cell constitutes the total charge of the complete unit cell after compensation.We conclude that the emergence of corner states is attributed to the filling anomaly,which is a fundamental mechanism.Our results refresh the understanding of HOTIs,especially those with structural discontinuities,and provide a novel design for topological states which have application value in producing optical functional devices.
文摘https://www.sciencedirect.com/journal/energy-and-buildings/vol/354/suppl/C Volume 354,1 March 2026[OA](1)Rule-based peak shaving strategy with battery storage:Evaluating socio-economic impacts in regional grids by Md Masud Rana,Huadong Mo,Mohd Fakhizan Romlie,et al,Article 116983 Abstract:The Australian electricity framework includes several demand tariff structures,with peak demand charges constituting a significant cost component for consumers.Efficient peak load shaving techniques can mitigate these charges,leading to substantial economic benefits to the power suppliers,consumers,and society.
