Fluorescent probes based on intramolecular charge transfer(ICT) have obvious advantages for accurate quantitative analysis.To obtain high-performance ratiometric probes requires distinct photophysical properties durin...Fluorescent probes based on intramolecular charge transfer(ICT) have obvious advantages for accurate quantitative analysis.To obtain high-performance ratiometric probes requires distinct photophysical properties during recognition reaction process,which is closely related to their ICT characteristics.1,8-Naphthalimide is known as a typical fluorophore with desirable ICT property when functionalized with an electron-donating moiety at the para-position of the naphthalene chromophore.Although the photophysical properties of para-substituted 1,8-naphthalimide have been well studied,its meta-substituted counterpart has not been fully evaluated since the meta-position is conventionally thought to be weakly conjugated.Herein,combined experimental and theoretical studies are performed which consistently indicate that stronger charge transfer(CT) is exhibited by the meta-amino substituted 1,8-naphthalimide(m-NH_(2)) compared to the para-amino substituted one(p-NH_(2)).The ratiometric response of fluorescence with significant changes in wavelength and intensity upon acetylation(m-NAc and p-NAc) can be attributed to the larger ICT and stronger-NH_(2) vibrations.This observation is further demonstrated by deuterium oxide experiments,viscosity experiments and quantum chemical calculations.The practical application of meta-amino-1,8-naphthalimide ICT-based probes is also confirmed.This research is expected to bring an in-depth understanding of π-conjugated systems with ICT characteristics,and facilitates the design of sensitive ICT fluorescent probes with meta-amino substitution.展开更多
In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-f...In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.展开更多
To advance the theoretical understanding,technological development,and field application of electric charge induction for monitoring rock deformation and failure,this study investigates the induced electric charge gen...To advance the theoretical understanding,technological development,and field application of electric charge induction for monitoring rock deformation and failure,this study investigates the induced electric charge generated during the deformation and failure of igneous rocks.The charge originates mainly from a combination of electrical polarization and triboelectric effects.Through laboratory experiments,we analyzed the time-frequency evolution of induced electric charge signals and identified relevant monitoring parameters.An online downhole electric charge induction monitoring system was developed and validated in the field.Experimental results show that the dominant frequency range of induced electric charge signals generated during igneous rock deformation and failure lies between 0 and 23 Hz,and a low-pass finite impulse response(FIR)filter effectively suppresses noise.Optimal sensor distances for monitoring cubic and cylindrical specimens were determined to be 17 mm and 13 mm,respectively.We proposed early warning indicators,including the maximum absolute value of the induced electric charge,the arithmetic mean value,the distribution dispersion coefficient,and the cumulative sum value.In field application,time-domain curves and spatial distribution charts of these warning indicators correspond well with changes in abutment stress ahead of the mining face,offering indirect insights into local stress evolution.This research provides technical and equipment support for the application of electric charge induction technology to monitoring and early warning of coal bursts.展开更多
The rapid recombination of photogenerated charge carriers and the poor stability of metal sulfides remain bottlenecks limiting their practical applications. In this study, sulfur vacancies were introduced into an S-sc...The rapid recombination of photogenerated charge carriers and the poor stability of metal sulfides remain bottlenecks limiting their practical applications. In this study, sulfur vacancies were introduced into an S-scheme AgIn_(5)S_(8)/Bi_(2)S_(3) heterojunction via an in situ hydrothermal method. The sulfur vacancies induced charge density redistribution within the heterojunction and generated efficient active sites for electrons, thereby creating a localized electron-rich environment. The synergistic effects of the sulfur vacancies, internal electric field, and defect energy levels accelerated the separation and transfer of photogenerated charge carriers via the S-scheme pathway, thereby enhancing the visible-light photocatalytic performance, by achieving a Cr(Ⅵ) reduction efficiency of 99.6%. More importantly, the long-term stability and excellent anti-interference capability of the S-scheme AgIn_(5)S_(8)/Bi_(2)S_(3) heterojunction demonstrate its practical application potential, achieving 98.9% Cr(Ⅵ) removal from real electroplating wastewater and meeting discharge standards. This work provides a theoretical basis for constructing highly-catalytic S-scheme heterojunctions and serves as a promising solution for Cr(VI)-containing electroplating wastewater treatment.展开更多
To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals ...To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals during coal mass loading.By integrating innovative analytical approaches,introducing quantitative evaluation indices,and developing a charge–stress inversion model,and incorporating underground monitoring practices,significant progress has been achieved in elucidating the correlation between stress variations and charge signals throughout the entire coal mass fracturing process.First,in the field of stress–charge correlation analysis,empirical mode decomposition(EMD)was combined with wavelet coherence analysis for the first time,enabling the removal of slow-varying stress trends while retaining high-frequency fluctuations.This approach allowed for the quantitative characterization of the evolution of coherence between stress variations and charge fluctuations across multiple time scales.Second,coherence skewness and the proportion of high-coherence intervals were innovatively introduced to examine the influence of time scale selection on correlation results.On this basis,a criterion for determining the near-optimal observation scale of charge signals was proposed,providing a quantitative reference for time scale selection in similar signal analyses.Finally,by correlating charge signals with coal damage factors and stress states,a charge-based damage evolution equation was established to achieve effective stress inversion.Combined with in situ monitoring of stress and charge in roadway surrounding rock,this approach revealed the correlation characteristics of stress and charge intensity responses during the dynamic fracturing process.The results indicate,first,that charge signals are not significantly correlated with the absolute stress level of coal but are directly associated with stress variations following coal damage and failure,with the amplitude of charge fluctuations increasing alongside stress fluctuations.Second,coherence between stress and charge signals varies markedly across time scales,with excessively small or large scales leading to distortion,and the scale corresponding to the peak proportion of intervals with coherence>0.8 was identified as the near-optimal observation scale.Third,charge signals can effectively characterize coal damage factors,and the established damage evolution equation can effectively invert stress variation trends.Fourth,in underground roadways,zones of dynamic fracturing in surrounding rock are commonly located in areas where stress concentration overlaps with regions of high charge intensity,further confirming the strong consistency between charge and stress variations.These findings improve the theoretical framework of charge signal responses in loaded coal and provide a scientific basis for precise“stress-charge”monitoring of dynamic disasters,offering practical potential for engineering applications.展开更多
The severe shuttle effect and sluggish reaction kinetics in room-temperature sodium-sulfur(RT Na-S)batteries have been major bottlenecks hindering their practical application.To overcome these challenges,a straightfor...The severe shuttle effect and sluggish reaction kinetics in room-temperature sodium-sulfur(RT Na-S)batteries have been major bottlenecks hindering their practical application.To overcome these challenges,a straightforward reduction approach was employed to design three bimetallic alloy nanoparticles(FeNi,FeCo,and NiCo)supported on multistage porous carbon substrates.Experimental and theoretical calculations reveal that the charge transfer within the alloy catalyst influences the position of its d-band center and its degree of hybridization with sodium polysulfides(NaPSs).An increased charge transfer leads to a shift of the alloy’s d-band center closer to the Fermi energy level,thereby enhancing its adsorption and catalytic capabilities.Among the three alloy compositions,the FeNi alloy exhibits the highest charge transfer.Consequently,the FeNi alloy demonstrates the superior electrochemical performance,achieving a high reversible specific capacity of 848.2 mA h g^(−1),with an average capacity degradation rate of only 0.037%per cycle over 1000 cycles at 1.2 C.The S/FeNi/NC cathode exhibits a low electrolyte-to-sulfur(E/S)ratio of 6.6µL mg^(−1),while maintaining a high reversible specific capacity of 568.1 mA h g^(−1).This offers valuable insights for the application of alloy catalysts in the S/FeNi/NC cathode of RT Na-S batteries.展开更多
Oxygen evolution reaction(OER)is widely recognized as a bottleneck of water electrolysis.To determine the underlying reaction mechanisms,particularly the relative contribution of the adsorbate evolution mechanism(AEM)...Oxygen evolution reaction(OER)is widely recognized as a bottleneck of water electrolysis.To determine the underlying reaction mechanisms,particularly the relative contribution of the adsorbate evolution mechanism(AEM)and lattice-oxygen participation mechanism(LOM),we conduct a comprehensive investigation combining Density Functional Theory(DFT)calculations and experimental validation.Our theoretical analysis of doped RuO_(2)catalysts reveals that heteroatom doping(Ni,Cu,and Zn)induces significant local charge transfer,leading to the increased charge state of Ru and the downshifted d-band center.This,in turn,enables the mechanism switching from the conventional AEM to the more efficient LOM,and finally improves OER activity.We also establish a simple yet powerful descriptor,Ne of Ru(representing charge density of Ru sites),which enables accurate prediction of both catalytic activity and stability.Guided by these theoretical predictions,we successfully synthesize a Ni-doped RuO_(2)catalyst,which exhibits excellent OER activity and stability in acidic media,achieving an overpotential of just 156 mV and maintaining stability for 4000 h at 10 mA cm^(−2),significantly surpassing the performance of the commercial RuO_(2).These findings not only provide fundamental insights into the mechanism-switching behavior in OER catalysis but also offer a practical strategy for designing high-performance,stable electrocatalysts for acidic water electrolysis.展开更多
The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,mate...The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,material strength dictates the resistance to plastic deformation and flow,a contrast to the shockwave-dominated interactions where compressibility is key.This paper presents a self-consistent compressible penetration theory that considers both the axial penetration and radial crater growth of shaped charge jets into targets.An integrated approach where the axial and radial dynamics are coupled has been proposed,influencing each other through shared physical principles rather than being treated as separate,empirically linked phenomena.The presented theory is rooted in the compressible Bernoulli equation and the linear Rankine-Hugoniot relation.These foundational equations are employed to accurately model the high-pressure shock state and subsequent material flow at the jet-target interface,providing a robust physical basis for the penetration model.Notably,it considers the target material's compressibility,which elevates the pressure at the jet-target interface beyond that observed with incompressible materials.This pressure increase is directly proportional to the target's degree of compressibility.As such,this model of compressible penetration reorients the analytical approach:rather than merely estimating penetration resistance,it determines this value from the target material's specific compressibility and yield strength.This shift from empirical correlations to a physics-based derivation of penetration resistance enhances the model's predictive power,particularly for novel target materials or engagement conditions outside established experimental datasets.This investigation establishes a quantitative link between the material's yield strength and its penetration resistance.The accuracy of this penetration resistance value is paramount,as it significantly influences the predicted crater diameter;indeed,the crater diameter's sensitivity to this resistance underscores the necessity for its precise determination.Ultimately,by integrating the yield strength of the target material,this framework enables the prediction of both the penetration depth and the resultant crater diameter from a shaped charge jet.The theory's validation involved two experimental sets:the first focused on shaped charge jet penetration into 45#steel at varied stand-offs,while the second utilized targets of high-to ultrahigh-strength steel-fiber reactive powder concrete(RPC)with differing strength characteristics.These experimental campaigns were specifically chosen to test the theory against both ductile metallic alloys,where plastic flow is significant,and advanced quasi-brittle cementitious composites,presenting a broad spectrum of material responses and penetration challenges.Resulting hole profiles derived from theoretical calculations demonstrated a strong correspondence with empirical measurements for both material types.展开更多
Correction to:Nano-Micro Letters(2026)18:10.https://doi.org/10.1007/s40820-025-01852-8 Following publication of the original article[1],the authors reported that the last author’s name was inadvertently misspelled.Th...Correction to:Nano-Micro Letters(2026)18:10.https://doi.org/10.1007/s40820-025-01852-8 Following publication of the original article[1],the authors reported that the last author’s name was inadvertently misspelled.The published version showed“Hongzhen Chen”,whereas the correct spelling should be“Hongzheng Chen”.The correct author name has been provided in this Correction,and the original article[1]has been corrected.展开更多
The development of optoelectronic technologies demands photodetectors with miniaturization,broadband operation,high sensitivity,and low power consumption.Although 2D van der Waals(vd W)heterostructures are promising c...The development of optoelectronic technologies demands photodetectors with miniaturization,broadband operation,high sensitivity,and low power consumption.Although 2D van der Waals(vd W)heterostructures are promising candidates due to their built-in electric fields,ultrafast photocarrier separation,and tunable bandgaps,defect states limit their performance.Therefore,the modulation of the optoelectronic properties in such heterostructures is imperative.Surface charge transfer doping(SCTD)has emerged as a promising strategy for non-destructive modulation of electronic and optoelectronic characteristics in two-dimensional materials.In this work,we demonstrate the construction of high-performance p-i-n vertical heterojunction photodetectors through SCTD of MoTe_(2)/ReS_(2)heterostructure using p-type F_(4)-TCNQ.Systematic characterization reveals that the interfacial doping process effectively amplifies the built-in electric field,enhancing photogenerated carrier separation efficiency.Compared to the pristine heterojunction device,the doped photodetector exhibits remarkable visible to nearinfrared(635-1064 nm)performance.Particularly under 1064 nm illumination at zero bias,the device achieves a responsivity of 2.86 A/W and specific detectivity of 1.41×10^(12)Jones.Notably,the external quantum efficiency reaches an exceptional value of 334%compared to the initial 11.5%,while maintaining ultrafast response characteristics with rise/fall times of 11.6/15.6μs.This work provides new insights into interface engineering through molecular doping for developing high-performance vd W optoelectronic devices.展开更多
Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generat...Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.展开更多
Composite polymer electrolytes(CPEs)offer a promising solution for all-solid-state lithium-metal batteries(ASSLMBs).However,conventional nanofillers with Lewis-acid-base surfaces make limited contribution to improving...Composite polymer electrolytes(CPEs)offer a promising solution for all-solid-state lithium-metal batteries(ASSLMBs).However,conventional nanofillers with Lewis-acid-base surfaces make limited contribution to improving the overall performance of CPEs due to their difficulty in achieving robust electrochemical and mechanical interfaces simultaneously.Here,by regulating the surface charge characteristics of halloysite nanotube(HNT),we propose a concept of lithium-ion dynamic interface(Li^(+)-DI)engineering in nano-charged CPE(NCCPE).Results show that the surface charge characteristics of HNTs fundamentally change the Li^(+)-DI,and thereof the mechanical and ion-conduction behaviors of the NCCPEs.Particularly,the HNTs with positively charged surface(HNTs+)lead to a higher Li^(+)transference number(0.86)than that of HNTs-(0.73),but a lower toughness(102.13 MJ m^(-3)for HNTs+and 159.69 MJ m^(-3)for HNTs-).Meanwhile,a strong interface compatibilization effect by Li^(+)is observed for especially the HNTs+-involved Li^(+)-DI,which improves the toughness by 2000%compared with the control.Moreover,HNTs+are more effective to weaken the Li^(+)-solvation strength and facilitate the formation of Li F-rich solid-electrolyte interphase of Li metal compared to HNTs-.The resultant Li|NCCPE|LiFePO4cell delivers a capacity of 144.9 m Ah g^(-1)after 400 cycles at 0.5 C and a capacity retention of 78.6%.This study provides deep insights into understanding the roles of surface charges of nanofillers in regulating the mechanical and electrochemical interfaces in ASSLMBs.展开更多
Small-sized Cd_(x) Zn_(1-x) S solid solution nanomaterial is an important candidate for efficient photocatalytic hydrogen evolution(PHE),but it still suffers from easy agglomeration,severe photo corrosion,and fast pho...Small-sized Cd_(x) Zn_(1-x) S solid solution nanomaterial is an important candidate for efficient photocatalytic hydrogen evolution(PHE),but it still suffers from easy agglomeration,severe photo corrosion,and fast photogenerated electron-hole recombination.To tackle these issues,herein,we propose a new strategy to modify Cd_(x) Zn_(1-x) S nanoreactors by the simultaneous utilization of ionic-liquid-assisted morphology engineering and MXene-incorporating method.That is,we designed and synthesized a novel hierarchi-cal Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction composite through the in-situ deposition of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets on unique IL-modified Ti_(3) C_(2) MXenes by a one-pot solvothermal method for efficiently PHE.The unique construction strategy tailors the thickness of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets and prevents them from stacking and agglomeration,and especially,optimizes their charge transfer pathways during the photocatalytic process.Compared with pristine Cd_(0.8) Zn_(0.2) S nanosheets,Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) has abun-dant photogenerated electrons available on the Ti_(3) C_(2) surface for proton reduction reaction,owing to the absence of deep-trapped electrons,suppression of electron-hole recombination in Cd_(0.8) Zn_(0.2) S and high-efficiency charge separation at the Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction interface.Moreover,the hy-drophilicity,electrical conductivity,visible-light absorption capacity,and surficial hydrogen desorption of Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) heterostructure are significantly improved.As a result,the heterostructure exhibits out-standing photocatalytic stability and super high apparent quantum efficiency,being rendered as one of the best noble-metal-free Cd-Zn-S-based photocatalysts.This work illustrates the mechanisms of mor-phology control and heterojunction construction in controlling the catalytic behavior of photocatalysts and highlights the great potential of the IL-assisted route in the synthesis of high-performance MXene-based heterostructures for photocatalytic hydrogen evolution.展开更多
Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show ...Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.展开更多
In this work,a series of experiments are carried out to investigate the effect of charge/discharge rates(1,2,3 and 4 C)and state of charges(SOCs,namely 0%,50%,75%and 100%)on thermal runaway(TR)and fire behavior of lit...In this work,a series of experiments are carried out to investigate the effect of charge/discharge rates(1,2,3 and 4 C)and state of charges(SOCs,namely 0%,50%,75%and 100%)on thermal runaway(TR)and fire behavior of lithium iron phosphate(LFP)batteries.The TR process caused by overheating LFP batteries is usually divided into four stages,with high temperatures and fire risks.High-rate charge and discharge damage the internal morphology and structural stability of materials seriously.The TR behavior of battery is fully aggravated,which is further manifested by the advanced opening of the safety vent,release of gas and occurrence of TR.With the increase of charging rate,the deteriorated TR characteristics can be discerned,such as the lower TR temperature,the shorter TR time,and the more serious TR consequences.Such changes can be assigned to the decline of battery stability.In addition,the battery SOC greatly impacts safety,especially the flame temperature and the severity of consequences.As for the 100%SOC battery cycled at 4 C,there is still a high risk of thermal runaway propagation at the position 1 m far away from the battery.This work helps to realize the TR and fire features of battery in-depth,enlightening the safety protection of battery.展开更多
To explore the design criteria for composite charges and reveal the intrinsic relationship between the detonation wave propagation in composite charges and the overall energy distribution of shock waves,this study ana...To explore the design criteria for composite charges and reveal the intrinsic relationship between the detonation wave propagation in composite charges and the overall energy distribution of shock waves,this study analyzes the propagation and interaction processes of detonation waves in composite charges with different structural dimensions and explosive combinations. It also investigates the spatial distribution characteristics of the resulting shock wave loads. Based on dimensional analysis theory, a theoretical analysis of the shock wave overpressure distribution in free air fields is conducted. Utilizing the derived dimensionless function relationships, the hydrocode AUTODYN is employed to investigate the effects of charge structure parameters and explosive combinations on the internal overdriven detonation phenomena and the distribution of shock wave loads. It is found that the overdriven detonation phenomenon in the inner layer of composite charges increases the strength of the axial detonation wave,thereby enhancing the intensity of the primary end wave formed upon refraction into the air, which affects the distribution characteristics of the shock wave overpressure. Research has shown that increasing the thickness ratio and detonation velocity ratio of composite charges is beneficial for exacerbating the phenomenon of overdriven detonation, improving the primary end wave intensity and axial overpressure. This gain effect gradually weakens with the propagation of shock waves. When overdriven detonation occurs inside the composite charge, the detonation pressure first increases and then decreases. The Mach reflection pressure of the composite charge with a larger aspect ratio is attenuated to a greater extent. In addition, as the aspect ratio of the composite charge increases, the shock wave energy gradually flows from the axial direction to the radial direction. Therefore, as the aspect ratio of the composite charge increases, the primary end wave intensity and axial overpressure gradually decrease.展开更多
To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based sim...To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based simulation(NNS)method with higher accuracy and better efficiency was proposed.The NNS method consisted of three main steps.First,the parameters of blast loads,including the peak pressures and impulses of cylindrical charges with different aspect ratios(L/D)at different stand-off distances and incident angles were obtained by two-dimensional numerical simulations.Subsequently,incident shape factors of cylindrical charges with arbitrary aspect ratios were predicted by a neural network.Finally,reflected shape factors were derived and implemented into the subroutine of the ABAQUS code to modify the CONWEP model,including modifications of impulse and overpressure.The reliability of the proposed NNS method was verified by related experimental results.Remarkable accuracy improvement was acquired by the proposed NNS method compared with the unmodified CONWEP model.Moreover,huge efficiency superiority was obtained by the proposed NNS method compared with the CEL method.The proposed NNS method showed good accuracy when the scaled distance was greater than 0.2 m/kg^(1/3).It should be noted that there is no need to generate a new dataset again since the blast loads satisfy the similarity law,and the proposed NNS method can be directly used to simulate the blast loads generated by different cylindrical charges.The proposed NNS method with high efficiency and accuracy can be used as an effective method to analyze the dynamic response of structures under blast loads,and it has significant application prospects in designing protective structures.展开更多
基金financially supported by National Key Research and Development Programs (Nos.2022YFD1700403 and 2023YFD1700303)National Natural Science Foundation of China (Nos.12274128 and 12250003)+2 种基金Shanghai Rising-Star Program (No.21QA1402600)the support of NYU-ECNU Center for Computational Chemistry at NYU Shanghaithe University of Bath and the Open Research Fund of the School of Chemistry and Chemical Engineering,Henan Normal University (No.2020ZD01) for support。
文摘Fluorescent probes based on intramolecular charge transfer(ICT) have obvious advantages for accurate quantitative analysis.To obtain high-performance ratiometric probes requires distinct photophysical properties during recognition reaction process,which is closely related to their ICT characteristics.1,8-Naphthalimide is known as a typical fluorophore with desirable ICT property when functionalized with an electron-donating moiety at the para-position of the naphthalene chromophore.Although the photophysical properties of para-substituted 1,8-naphthalimide have been well studied,its meta-substituted counterpart has not been fully evaluated since the meta-position is conventionally thought to be weakly conjugated.Herein,combined experimental and theoretical studies are performed which consistently indicate that stronger charge transfer(CT) is exhibited by the meta-amino substituted 1,8-naphthalimide(m-NH_(2)) compared to the para-amino substituted one(p-NH_(2)).The ratiometric response of fluorescence with significant changes in wavelength and intensity upon acetylation(m-NAc and p-NAc) can be attributed to the larger ICT and stronger-NH_(2) vibrations.This observation is further demonstrated by deuterium oxide experiments,viscosity experiments and quantum chemical calculations.The practical application of meta-amino-1,8-naphthalimide ICT-based probes is also confirmed.This research is expected to bring an in-depth understanding of π-conjugated systems with ICT characteristics,and facilitates the design of sensitive ICT fluorescent probes with meta-amino substitution.
基金supported by the National Natural Science Foundation of China(Grant Nos.52271307,52061135107,52192692,11802025)the Liao Ning Excellent Youth Fund Program(Grant No.2023JH3/10200012)+1 种基金the Liao Ning Revitalization Tal-ents Program(Grant No.XLYC1908027)the Fundamental Research Funds for the Central Universities(Grant Nos.DUT20RC(3)025,DUT20TD108,DUT20LAB308)。
文摘In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.
基金supported by the National Key Research and Development Project of the National Natural Science Foundation of China(Grant No.2022YFC3004605)the National Natural Science Foundation of China Youth Science Fund(Grant No.52104087).
文摘To advance the theoretical understanding,technological development,and field application of electric charge induction for monitoring rock deformation and failure,this study investigates the induced electric charge generated during the deformation and failure of igneous rocks.The charge originates mainly from a combination of electrical polarization and triboelectric effects.Through laboratory experiments,we analyzed the time-frequency evolution of induced electric charge signals and identified relevant monitoring parameters.An online downhole electric charge induction monitoring system was developed and validated in the field.Experimental results show that the dominant frequency range of induced electric charge signals generated during igneous rock deformation and failure lies between 0 and 23 Hz,and a low-pass finite impulse response(FIR)filter effectively suppresses noise.Optimal sensor distances for monitoring cubic and cylindrical specimens were determined to be 17 mm and 13 mm,respectively.We proposed early warning indicators,including the maximum absolute value of the induced electric charge,the arithmetic mean value,the distribution dispersion coefficient,and the cumulative sum value.In field application,time-domain curves and spatial distribution charts of these warning indicators correspond well with changes in abutment stress ahead of the mining face,offering indirect insights into local stress evolution.This research provides technical and equipment support for the application of electric charge induction technology to monitoring and early warning of coal bursts.
基金supported by the National Natural Science Foundation of China (Grant No.52470078)the Natural Science Foundation of Jiangxi Province (Grant No.20252BAC250042)the Key Laboratory of Jiangxi Province for Persistent Pollutants Prevention Control and Resource Reuse (Grant No.2023SSY02061)。
文摘The rapid recombination of photogenerated charge carriers and the poor stability of metal sulfides remain bottlenecks limiting their practical applications. In this study, sulfur vacancies were introduced into an S-scheme AgIn_(5)S_(8)/Bi_(2)S_(3) heterojunction via an in situ hydrothermal method. The sulfur vacancies induced charge density redistribution within the heterojunction and generated efficient active sites for electrons, thereby creating a localized electron-rich environment. The synergistic effects of the sulfur vacancies, internal electric field, and defect energy levels accelerated the separation and transfer of photogenerated charge carriers via the S-scheme pathway, thereby enhancing the visible-light photocatalytic performance, by achieving a Cr(Ⅵ) reduction efficiency of 99.6%. More importantly, the long-term stability and excellent anti-interference capability of the S-scheme AgIn_(5)S_(8)/Bi_(2)S_(3) heterojunction demonstrate its practical application potential, achieving 98.9% Cr(Ⅵ) removal from real electroplating wastewater and meeting discharge standards. This work provides a theoretical basis for constructing highly-catalytic S-scheme heterojunctions and serves as a promising solution for Cr(VI)-containing electroplating wastewater treatment.
基金supported by the Research Fund of the National Natural Science Foundation of China(No.52374205)the Fundamental Research Project of the Educational Department of Liaoning Province(No.JYTMS20230793)the Research Fund of the State Key Laboratory of Coal Resources and Safe Mining,CUMT(No.YJY-XD-2024-A-016).
文摘To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals during coal mass loading.By integrating innovative analytical approaches,introducing quantitative evaluation indices,and developing a charge–stress inversion model,and incorporating underground monitoring practices,significant progress has been achieved in elucidating the correlation between stress variations and charge signals throughout the entire coal mass fracturing process.First,in the field of stress–charge correlation analysis,empirical mode decomposition(EMD)was combined with wavelet coherence analysis for the first time,enabling the removal of slow-varying stress trends while retaining high-frequency fluctuations.This approach allowed for the quantitative characterization of the evolution of coherence between stress variations and charge fluctuations across multiple time scales.Second,coherence skewness and the proportion of high-coherence intervals were innovatively introduced to examine the influence of time scale selection on correlation results.On this basis,a criterion for determining the near-optimal observation scale of charge signals was proposed,providing a quantitative reference for time scale selection in similar signal analyses.Finally,by correlating charge signals with coal damage factors and stress states,a charge-based damage evolution equation was established to achieve effective stress inversion.Combined with in situ monitoring of stress and charge in roadway surrounding rock,this approach revealed the correlation characteristics of stress and charge intensity responses during the dynamic fracturing process.The results indicate,first,that charge signals are not significantly correlated with the absolute stress level of coal but are directly associated with stress variations following coal damage and failure,with the amplitude of charge fluctuations increasing alongside stress fluctuations.Second,coherence between stress and charge signals varies markedly across time scales,with excessively small or large scales leading to distortion,and the scale corresponding to the peak proportion of intervals with coherence>0.8 was identified as the near-optimal observation scale.Third,charge signals can effectively characterize coal damage factors,and the established damage evolution equation can effectively invert stress variation trends.Fourth,in underground roadways,zones of dynamic fracturing in surrounding rock are commonly located in areas where stress concentration overlaps with regions of high charge intensity,further confirming the strong consistency between charge and stress variations.These findings improve the theoretical framework of charge signal responses in loaded coal and provide a scientific basis for precise“stress-charge”monitoring of dynamic disasters,offering practical potential for engineering applications.
基金supported by Shaanxi Fundamental Science Research Project for Chemistry and Biology(23JHQ011)Natural Science Foundation of Shaanxi(2024JC-YBMS-115)Natural Science Basic Research Plan in Shaanxi Province of China(2025JC-YBMS-141)。
文摘The severe shuttle effect and sluggish reaction kinetics in room-temperature sodium-sulfur(RT Na-S)batteries have been major bottlenecks hindering their practical application.To overcome these challenges,a straightforward reduction approach was employed to design three bimetallic alloy nanoparticles(FeNi,FeCo,and NiCo)supported on multistage porous carbon substrates.Experimental and theoretical calculations reveal that the charge transfer within the alloy catalyst influences the position of its d-band center and its degree of hybridization with sodium polysulfides(NaPSs).An increased charge transfer leads to a shift of the alloy’s d-band center closer to the Fermi energy level,thereby enhancing its adsorption and catalytic capabilities.Among the three alloy compositions,the FeNi alloy exhibits the highest charge transfer.Consequently,the FeNi alloy demonstrates the superior electrochemical performance,achieving a high reversible specific capacity of 848.2 mA h g^(−1),with an average capacity degradation rate of only 0.037%per cycle over 1000 cycles at 1.2 C.The S/FeNi/NC cathode exhibits a low electrolyte-to-sulfur(E/S)ratio of 6.6µL mg^(−1),while maintaining a high reversible specific capacity of 568.1 mA h g^(−1).This offers valuable insights for the application of alloy catalysts in the S/FeNi/NC cathode of RT Na-S batteries.
基金supported by the National Natural Science Foundation of China(22472104)Guangdong Basic and Applied Basic Research Foundation(2024A1515012075,2024A1515010028)the Postdoctoral Fellowship Program of CPS Funder(GZC20241083,2025M771117)。
文摘Oxygen evolution reaction(OER)is widely recognized as a bottleneck of water electrolysis.To determine the underlying reaction mechanisms,particularly the relative contribution of the adsorbate evolution mechanism(AEM)and lattice-oxygen participation mechanism(LOM),we conduct a comprehensive investigation combining Density Functional Theory(DFT)calculations and experimental validation.Our theoretical analysis of doped RuO_(2)catalysts reveals that heteroatom doping(Ni,Cu,and Zn)induces significant local charge transfer,leading to the increased charge state of Ru and the downshifted d-band center.This,in turn,enables the mechanism switching from the conventional AEM to the more efficient LOM,and finally improves OER activity.We also establish a simple yet powerful descriptor,Ne of Ru(representing charge density of Ru sites),which enables accurate prediction of both catalytic activity and stability.Guided by these theoretical predictions,we successfully synthesize a Ni-doped RuO_(2)catalyst,which exhibits excellent OER activity and stability in acidic media,achieving an overpotential of just 156 mV and maintaining stability for 4000 h at 10 mA cm^(−2),significantly surpassing the performance of the commercial RuO_(2).These findings not only provide fundamental insights into the mechanism-switching behavior in OER catalysis but also offer a practical strategy for designing high-performance,stable electrocatalysts for acidic water electrolysis.
基金the Fundamental Research Funds for the Central Universities of Nanjing University of Science and Technology(CN)under Grant No.30924010803。
文摘The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,material strength dictates the resistance to plastic deformation and flow,a contrast to the shockwave-dominated interactions where compressibility is key.This paper presents a self-consistent compressible penetration theory that considers both the axial penetration and radial crater growth of shaped charge jets into targets.An integrated approach where the axial and radial dynamics are coupled has been proposed,influencing each other through shared physical principles rather than being treated as separate,empirically linked phenomena.The presented theory is rooted in the compressible Bernoulli equation and the linear Rankine-Hugoniot relation.These foundational equations are employed to accurately model the high-pressure shock state and subsequent material flow at the jet-target interface,providing a robust physical basis for the penetration model.Notably,it considers the target material's compressibility,which elevates the pressure at the jet-target interface beyond that observed with incompressible materials.This pressure increase is directly proportional to the target's degree of compressibility.As such,this model of compressible penetration reorients the analytical approach:rather than merely estimating penetration resistance,it determines this value from the target material's specific compressibility and yield strength.This shift from empirical correlations to a physics-based derivation of penetration resistance enhances the model's predictive power,particularly for novel target materials or engagement conditions outside established experimental datasets.This investigation establishes a quantitative link between the material's yield strength and its penetration resistance.The accuracy of this penetration resistance value is paramount,as it significantly influences the predicted crater diameter;indeed,the crater diameter's sensitivity to this resistance underscores the necessity for its precise determination.Ultimately,by integrating the yield strength of the target material,this framework enables the prediction of both the penetration depth and the resultant crater diameter from a shaped charge jet.The theory's validation involved two experimental sets:the first focused on shaped charge jet penetration into 45#steel at varied stand-offs,while the second utilized targets of high-to ultrahigh-strength steel-fiber reactive powder concrete(RPC)with differing strength characteristics.These experimental campaigns were specifically chosen to test the theory against both ductile metallic alloys,where plastic flow is significant,and advanced quasi-brittle cementitious composites,presenting a broad spectrum of material responses and penetration challenges.Resulting hole profiles derived from theoretical calculations demonstrated a strong correspondence with empirical measurements for both material types.
文摘Correction to:Nano-Micro Letters(2026)18:10.https://doi.org/10.1007/s40820-025-01852-8 Following publication of the original article[1],the authors reported that the last author’s name was inadvertently misspelled.The published version showed“Hongzhen Chen”,whereas the correct spelling should be“Hongzheng Chen”.The correct author name has been provided in this Correction,and the original article[1]has been corrected.
基金financial support from 2024 Domestic Visiting Scholar Program for Teachers'Professional Development in Universities(Grant No.FX2024022)National Natural Science Foundation of China(Grant No.61904043)。
文摘The development of optoelectronic technologies demands photodetectors with miniaturization,broadband operation,high sensitivity,and low power consumption.Although 2D van der Waals(vd W)heterostructures are promising candidates due to their built-in electric fields,ultrafast photocarrier separation,and tunable bandgaps,defect states limit their performance.Therefore,the modulation of the optoelectronic properties in such heterostructures is imperative.Surface charge transfer doping(SCTD)has emerged as a promising strategy for non-destructive modulation of electronic and optoelectronic characteristics in two-dimensional materials.In this work,we demonstrate the construction of high-performance p-i-n vertical heterojunction photodetectors through SCTD of MoTe_(2)/ReS_(2)heterostructure using p-type F_(4)-TCNQ.Systematic characterization reveals that the interfacial doping process effectively amplifies the built-in electric field,enhancing photogenerated carrier separation efficiency.Compared to the pristine heterojunction device,the doped photodetector exhibits remarkable visible to nearinfrared(635-1064 nm)performance.Particularly under 1064 nm illumination at zero bias,the device achieves a responsivity of 2.86 A/W and specific detectivity of 1.41×10^(12)Jones.Notably,the external quantum efficiency reaches an exceptional value of 334%compared to the initial 11.5%,while maintaining ultrafast response characteristics with rise/fall times of 11.6/15.6μs.This work provides new insights into interface engineering through molecular doping for developing high-performance vd W optoelectronic devices.
基金financial support from the Nuclear Energy Science&Technology and Human Resource Development Project of the Japan Atomic Energy Agency/Collaborative Laboratories for Advanced Decommissioning Science(No.R04I034)The author Ruicong Xu appreciates the scholarship(financial support)from the China Scholarship Council(CSC,No.202106380073).
文摘Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.
基金the financial support from the National Natural Science Foundation of China(52203123 and 52473248)State Key Laboratory of Polymer Materials Engineering(sklpme2024-2-04)+1 种基金the Fundamental Research Funds for the Central Universitiessponsored by the Double First-Class Construction Funds of Sichuan University。
文摘Composite polymer electrolytes(CPEs)offer a promising solution for all-solid-state lithium-metal batteries(ASSLMBs).However,conventional nanofillers with Lewis-acid-base surfaces make limited contribution to improving the overall performance of CPEs due to their difficulty in achieving robust electrochemical and mechanical interfaces simultaneously.Here,by regulating the surface charge characteristics of halloysite nanotube(HNT),we propose a concept of lithium-ion dynamic interface(Li^(+)-DI)engineering in nano-charged CPE(NCCPE).Results show that the surface charge characteristics of HNTs fundamentally change the Li^(+)-DI,and thereof the mechanical and ion-conduction behaviors of the NCCPEs.Particularly,the HNTs with positively charged surface(HNTs+)lead to a higher Li^(+)transference number(0.86)than that of HNTs-(0.73),but a lower toughness(102.13 MJ m^(-3)for HNTs+and 159.69 MJ m^(-3)for HNTs-).Meanwhile,a strong interface compatibilization effect by Li^(+)is observed for especially the HNTs+-involved Li^(+)-DI,which improves the toughness by 2000%compared with the control.Moreover,HNTs+are more effective to weaken the Li^(+)-solvation strength and facilitate the formation of Li F-rich solid-electrolyte interphase of Li metal compared to HNTs-.The resultant Li|NCCPE|LiFePO4cell delivers a capacity of 144.9 m Ah g^(-1)after 400 cycles at 0.5 C and a capacity retention of 78.6%.This study provides deep insights into understanding the roles of surface charges of nanofillers in regulating the mechanical and electrochemical interfaces in ASSLMBs.
基金financial supports pro-vided by the National Natural Science Foundation of China(No.21905279)the Natural Science Foundation of Fujian Province(No.2020J05086).
文摘Small-sized Cd_(x) Zn_(1-x) S solid solution nanomaterial is an important candidate for efficient photocatalytic hydrogen evolution(PHE),but it still suffers from easy agglomeration,severe photo corrosion,and fast photogenerated electron-hole recombination.To tackle these issues,herein,we propose a new strategy to modify Cd_(x) Zn_(1-x) S nanoreactors by the simultaneous utilization of ionic-liquid-assisted morphology engineering and MXene-incorporating method.That is,we designed and synthesized a novel hierarchi-cal Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction composite through the in-situ deposition of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets on unique IL-modified Ti_(3) C_(2) MXenes by a one-pot solvothermal method for efficiently PHE.The unique construction strategy tailors the thickness of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets and prevents them from stacking and agglomeration,and especially,optimizes their charge transfer pathways during the photocatalytic process.Compared with pristine Cd_(0.8) Zn_(0.2) S nanosheets,Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) has abun-dant photogenerated electrons available on the Ti_(3) C_(2) surface for proton reduction reaction,owing to the absence of deep-trapped electrons,suppression of electron-hole recombination in Cd_(0.8) Zn_(0.2) S and high-efficiency charge separation at the Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction interface.Moreover,the hy-drophilicity,electrical conductivity,visible-light absorption capacity,and surficial hydrogen desorption of Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) heterostructure are significantly improved.As a result,the heterostructure exhibits out-standing photocatalytic stability and super high apparent quantum efficiency,being rendered as one of the best noble-metal-free Cd-Zn-S-based photocatalysts.This work illustrates the mechanisms of mor-phology control and heterojunction construction in controlling the catalytic behavior of photocatalysts and highlights the great potential of the IL-assisted route in the synthesis of high-performance MXene-based heterostructures for photocatalytic hydrogen evolution.
基金funded by the National Natural Science Founda-tion of China(52071109).
文摘Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.
基金supported by the National Key Research and Development Plan(2023YFC3009900)the National Natural Science Foundation of China(52104197,52272396,52474233)+3 种基金Hongkong Scholar Program(XJ2022022)Research Grants Council of the Hong Kong Special Administrative Region(City U11214221)Natural Science Foundation of the Jiangsu Higher Education Institutions(21KJB620001)the Open Fund of the State Key Laboratory of Fire Science(SKLFS)Program(HZ2022-KF04)。
文摘In this work,a series of experiments are carried out to investigate the effect of charge/discharge rates(1,2,3 and 4 C)and state of charges(SOCs,namely 0%,50%,75%and 100%)on thermal runaway(TR)and fire behavior of lithium iron phosphate(LFP)batteries.The TR process caused by overheating LFP batteries is usually divided into four stages,with high temperatures and fire risks.High-rate charge and discharge damage the internal morphology and structural stability of materials seriously.The TR behavior of battery is fully aggravated,which is further manifested by the advanced opening of the safety vent,release of gas and occurrence of TR.With the increase of charging rate,the deteriorated TR characteristics can be discerned,such as the lower TR temperature,the shorter TR time,and the more serious TR consequences.Such changes can be assigned to the decline of battery stability.In addition,the battery SOC greatly impacts safety,especially the flame temperature and the severity of consequences.As for the 100%SOC battery cycled at 4 C,there is still a high risk of thermal runaway propagation at the position 1 m far away from the battery.This work helps to realize the TR and fire features of battery in-depth,enlightening the safety protection of battery.
基金funded by the National Natural Science Foundation of China(Grant No. 12302437)Jiangsu Provincial Natural Science Foundation (Grant No.SBK2023045424)。
文摘To explore the design criteria for composite charges and reveal the intrinsic relationship between the detonation wave propagation in composite charges and the overall energy distribution of shock waves,this study analyzes the propagation and interaction processes of detonation waves in composite charges with different structural dimensions and explosive combinations. It also investigates the spatial distribution characteristics of the resulting shock wave loads. Based on dimensional analysis theory, a theoretical analysis of the shock wave overpressure distribution in free air fields is conducted. Utilizing the derived dimensionless function relationships, the hydrocode AUTODYN is employed to investigate the effects of charge structure parameters and explosive combinations on the internal overdriven detonation phenomena and the distribution of shock wave loads. It is found that the overdriven detonation phenomenon in the inner layer of composite charges increases the strength of the axial detonation wave,thereby enhancing the intensity of the primary end wave formed upon refraction into the air, which affects the distribution characteristics of the shock wave overpressure. Research has shown that increasing the thickness ratio and detonation velocity ratio of composite charges is beneficial for exacerbating the phenomenon of overdriven detonation, improving the primary end wave intensity and axial overpressure. This gain effect gradually weakens with the propagation of shock waves. When overdriven detonation occurs inside the composite charge, the detonation pressure first increases and then decreases. The Mach reflection pressure of the composite charge with a larger aspect ratio is attenuated to a greater extent. In addition, as the aspect ratio of the composite charge increases, the shock wave energy gradually flows from the axial direction to the radial direction. Therefore, as the aspect ratio of the composite charge increases, the primary end wave intensity and axial overpressure gradually decrease.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52271317 and 52071149)the Fundamental Research Funds for the Central Universities(HUST:2019kfy XJJS007)。
文摘To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based simulation(NNS)method with higher accuracy and better efficiency was proposed.The NNS method consisted of three main steps.First,the parameters of blast loads,including the peak pressures and impulses of cylindrical charges with different aspect ratios(L/D)at different stand-off distances and incident angles were obtained by two-dimensional numerical simulations.Subsequently,incident shape factors of cylindrical charges with arbitrary aspect ratios were predicted by a neural network.Finally,reflected shape factors were derived and implemented into the subroutine of the ABAQUS code to modify the CONWEP model,including modifications of impulse and overpressure.The reliability of the proposed NNS method was verified by related experimental results.Remarkable accuracy improvement was acquired by the proposed NNS method compared with the unmodified CONWEP model.Moreover,huge efficiency superiority was obtained by the proposed NNS method compared with the CEL method.The proposed NNS method showed good accuracy when the scaled distance was greater than 0.2 m/kg^(1/3).It should be noted that there is no need to generate a new dataset again since the blast loads satisfy the similarity law,and the proposed NNS method can be directly used to simulate the blast loads generated by different cylindrical charges.The proposed NNS method with high efficiency and accuracy can be used as an effective method to analyze the dynamic response of structures under blast loads,and it has significant application prospects in designing protective structures.
