Objective To observe the clinical efficacy of needling cervical Jiaji points in combination with acupoint pressing for cervical vertigo, and provide a better therapy for the clinical treatment of this disease. Methods...Objective To observe the clinical efficacy of needling cervical Jiaji points in combination with acupoint pressing for cervical vertigo, and provide a better therapy for the clinical treatment of this disease. Methods Sixty-five patients with cervical vertigo were punctured at the points Cervical jiaji and Fengchi （风池 GB 20） bilaterally, from Qiangjian （强间 GV 18） to Naohu （脑户 GV 17）, from Yuzhen （玉枕 BL 9） to Tianzhu （天柱 BL 10） with penetrating methods, besides, acupoint pressing was also used on these points. It was given once a day, and 16 times constituted one course with 2 courses together, and then the clinical efficacy was observed. Results Twenty-five cases were cured accounting to 38.5%; 18 remarkably improved accounting to 27.7%; 19 improved accounting to 29.2%; 3 ineffective accounting to 4.6%. The total effective rate was 95.4%. Conclusion Needling cervical Jiaji points in combination with acupoint pressing can alleviate the clinical symptoms of cervical vertigo and worthy of being promoted.展开更多
Catalyzed by cerium ammonium nitrate(CAN),the oxidative cracking reaction of alkenes occurred to produce carbonyls in good yields under mild conditions.The reaction employed molecular oxygen(O_(2))as the safe and clea...Catalyzed by cerium ammonium nitrate(CAN),the oxidative cracking reaction of alkenes occurred to produce carbonyls in good yields under mild conditions.The reaction employed molecular oxygen(O_(2))as the safe and clean oxidant.The catalyst dosage was reduced to as low as 0.5 mol%,while no additive was required.Thus,it may afford a generally green synthetic approach for introducing oxygen into organic molecules as well as the biomass degradation and the resource recycling from the C=C bond-containing waste polymers.X-ray photoelectron spectroscopy(XPS)analysis and control experiments demonstrated that the process proceeded via a single electron transfer(SET)reaction-initiated free radical reaction mechanism.In the process,both Ce and NO_(3)−acted as the oxygen carrier to promote the oxidation reaction.The application of the abundantly existed nitrate in CAN was found to be the key for reducing the catalyst loading.展开更多
The present work describes a facile,one-pot three component synthesis of a series of 3-[（4,5-diphenyl-2-substituted aryl/heteryl）-1H-imidazol-1-yl]-1H-1,2,4-triazole-5-carboxylic acid derivatives M（1-15）.Benzil,ar...The present work describes a facile,one-pot three component synthesis of a series of 3-[（4,5-diphenyl-2-substituted aryl/heteryl）-1H-imidazol-1-yl]-1H-1,2,4-triazole-5-carboxylic acid derivatives M（1-15）.Benzil,aromatic aldehydes and 3-amino-l,2,4-triazole-5-carboxylic acid was refluxed in ethanol using cerric ammonium nitrate（CAN） as a catalyst to give the title compounds in good yields.The compounds were evaluated for their in vitro antifungal and antibacterial activity.Compounds M1,M9,and M15 were found to be equipotent against Candida albicans when compared with fluconazole.Compounds M2.M5,and M14 showed higher activity against Streptococcus pneumoniae.Escherichia coli and Streptococcus pyogenes,respectively,compared with ampicillin.Docking study of the newly synthesized compounds was performed,and the results showed good binding mode in the active sites of C albicans enzyme cytochrome P450 lanosterol 14α-demethylase.The results of in vitro antifungal activity and docking study showed that synthesized compounds had potential antifungal activity and can be further optimized and developed as a lead compound.展开更多
2,4,5-Triarylimidazoles could be obtained in excellent yields by the one-pot three-component condensation of benzil/benzoin, aldehydes and ammonium acetate in the presence of catalytic amount of the inexpensive, readi...2,4,5-Triarylimidazoles could be obtained in excellent yields by the one-pot three-component condensation of benzil/benzoin, aldehydes and ammonium acetate in the presence of catalytic amount of the inexpensive, readily available and non-toxic ceric （IV） ammonium nitrate （CAN） in aqueous media under ultrasound at room temperature. In this reaction the products were obtained in short reaction time and easy operation under mild conditions.展开更多
Ceric ammonium nitrate （CAN） supported HY-zeolite has been used as an efficient catalyst for the one- pot synthesis of 1,8-dioxo-octahydroxanthenes from the readily available 1,3-diketone and aromatic aldehydes unde...Ceric ammonium nitrate （CAN） supported HY-zeolite has been used as an efficient catalyst for the one- pot synthesis of 1,8-dioxo-octahydroxanthenes from the readily available 1,3-diketone and aromatic aldehydes under solvent-free conditions. The present methodology is cost-effective in addition to other advantages like high yields of products in shorter reaction time and simple workup procedure without the use of any injurious solvents.展开更多
In the present work, graft copolymerization of polyacrylonitrile onto chitosan has been carried out in the presence of ceric ammonium nitrate redox initiator. Optimization of grafting of polyacrylonitrile onto chito-s...In the present work, graft copolymerization of polyacrylonitrile onto chitosan has been carried out in the presence of ceric ammonium nitrate redox initiator. Optimization of grafting of polyacrylonitrile onto chito-san was performed by varying the process parameters such as ceric ammonium nitrate (CAN) concentration, polyacrylonitrile concentration and reaction time to study their influence on percent grafting and grafting ef-ficiency. The optimum reaction conditions obtained for grafting of acrylonitrile onto chitosan were reaction time 55 mins, CAN concentration 1% in Con. HNO3, and polyacrylonitrile concentration 0.75 mol/L. The characterization of the grafted products by means of FTIR, thermal analysis, X-ray diffraction and scanning electron microscopy furnished the evidence of grafting of polyacrylonitrile onto chitosan.展开更多
The process of dehydrogenation of methyl butenes to isoprene is conducted in the presence of iron oxide catalysts whose composition may include oxides of alkaline metals, alkaline earth metals, and transition metals. ...The process of dehydrogenation of methyl butenes to isoprene is conducted in the presence of iron oxide catalysts whose composition may include oxides of alkaline metals, alkaline earth metals, and transition metals. Catalysts of latest generation can also contain oxides of rare earth elements, particularly cerium oxide. However there is no any common opinion concerning its effect on catalytic properties of iron oxide catalysts. It is well known that ceric oxide has a positive effect on the quantity and stability of active centers and can play a critical role in a redox cycle of the dehydrogenation process. By means of differential thermal analysis, dispersion analysis and X-ray phase analysis, it was found in present study that introducing of ceric oxide promotes the decrease in hematite crystallite sizes. At the same time, it prevents potassium polyferrites formation, with the equilibrium of topochemical reaction between ferric oxide and po tassium carbonates moving predominantly to the formation of intermediate products–monoferrite systems, having greater catalytic activity. The increase in potassium monoferrite content results in dispersion of particles in the Fe2O3-K2CO3-СеО2 system that is accompanied by modification of texture characteristics. For this catalyst composition, the optimum concentration of ceric oxide (8.7 wt.%), leading to the formation of a certain ratio of mono- and polyferrite phases, was found. If more than 8.7 wt.% of СеО2 is introduced, the modification of texture characteristics of catalyst samples takes place, that negatively affects their selectivity.展开更多
Acrylic acid was graft-copolymerized onto Rhi. oryzae's cell wall structural polysaccharide directly and efficiently in aqueous solution with eerie ammonium nitrate as initiator. The maximal grafting percentage of...Acrylic acid was graft-copolymerized onto Rhi. oryzae's cell wall structural polysaccharide directly and efficiently in aqueous solution with eerie ammonium nitrate as initiator. The maximal grafting percentage of 135.5% was obtained under the condition of [Ce4+]=5mmol·L-1, [AA]=lmol·L-1, T=60℃ and t=3h. Graft copolymerization was suggested to proceed through free radical reaction mechanism. Grafting occurred primarily on chitosan. Acrylic acid was also attempted to be grafted onto Asp. niger cell wall structural polysaccharide, and only 44.2% of grafting percentage was resulted.展开更多
Two copolymers containing p-tolylcarbamoyl pendant group poly (MAMT-co-VAc) and poly(MAMT-co-MA) were synthesized f and the graft copolymerization of AAM onto these two func-tional copolymers films initiated with ceri...Two copolymers containing p-tolylcarbamoyl pendant group poly (MAMT-co-VAc) and poly(MAMT-co-MA) were synthesized f and the graft copolymerization of AAM onto these two func-tional copolymers films initiated with ceric salt were carried out in aqueous solution for variousperiods at 30℃. The formation of graft copolymer was verified by water absorption, ESCA andSEM photographs. Based on the results of the study of the initiation mechanism of model com-pounds and ceric salt systems, the reaction mechanism of the graft copolymerization initiated withceric salt was proposed.展开更多
A series of novel 3-substituted-4-hydroxycoumarin derivatives 6（a-1） were synthesized in high yield using one-pot three component coupling reaction catalyzed by ceric ammonium nitrate. These compounds were evaluated...A series of novel 3-substituted-4-hydroxycoumarin derivatives 6（a-1） were synthesized in high yield using one-pot three component coupling reaction catalyzed by ceric ammonium nitrate. These compounds were evaluated for antileishmanial activity against Leishmania donovani promastigotes and antioxidant activity（DPPH-radical scavenging activity）. Two compounds, 6h（IC50= 9.90 μmol/L） and 6i（IC50= 6.90 μmol/L） displayed potent antileishmanial activity when compared with standard antileishmanial agents pentamidine（IC50= 16.15 μmol/L） and miltefosine（IC50= 12.50 μmol/L）. Three compounds, 6c（IC50= 10.79 μmol/L）, 6h（IC50= 10.60 μmol/L）, and 6i（IC50= 10.73 μmol/L） showed significant antioxidant activity favorably with the antioxidant standards butylated hydroxy toluene（IC50= 16.47 μmol/L） and ascorbic acid（IC50= 12.69 μmol/L）. A molecular docking study of compounds 6（a-1） suggested a possible mode of binding with the Adenine phosphoribosyltransferase enzyme of L.donovani. ADME properties were predicted in silico and support the potential of 6（a-1） to show favorable drug-like properties.展开更多
Acrylamide polymerization initiated with a redox initiation system consisting of eerie ion and ethyl N,N-diethyldithiocarbamyl acetate (EDCA) has been studied. It was found that the polymerization rate equation is in ...Acrylamide polymerization initiated with a redox initiation system consisting of eerie ion and ethyl N,N-diethyldithiocarbamyl acetate (EDCA) has been studied. It was found that the polymerization rate equation is in good agreement with that of a redox initiated polymerization, and the overall activation energy of the polymerization was determined to be 25.2 kJ.mol(-1). Accordingly, the system belongs to a redox initiator. The initiation mechanism was proposed based on the end group analysis using FT-IR, UV spectroscopies. Analysis results revealed that the N, N-diethyldithiocarbamyl radical produced from the redox reaction of EDCA with eerie ion can initiate acrylonitrile (AN) polymerization and form the end group on PAN. The resulting PAN was photopolymerized with butyl acrylate (BE) to form PAN-b-PBA block copolymer.展开更多
The polymerization of methyl acrylate was sensitive to UV light. Under UV light,the rate of polymerization is 8 times as high as the rate in dark.The overall activation energy was decreased by the UV light (313nm).A t...The polymerization of methyl acrylate was sensitive to UV light. Under UV light,the rate of polymerization is 8 times as high as the rate in dark.The overall activation energy was decreased by the UV light (313nm).A tentative explanation is given and the mechanism is discussed.展开更多
The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitri...The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.展开更多
he initiation mechanism of ceric ion/2-benzoyl acetanilide system was studiedby means of FT-IR, EPR and kinetic studies which revealed that 2-benzoyl ac-etanilide acts as a very active promotor to the polymerization i...he initiation mechanism of ceric ion/2-benzoyl acetanilide system was studiedby means of FT-IR, EPR and kinetic studies which revealed that 2-benzoyl ac-etanilide acts as a very active promotor to the polymerization initiated by ceric ion.The initiation mechanism was then proposed which involved the complex formationbetween a ceric ion and a l ,3-diketone group or a carbamate group, followed by,thedecomposition of the complex to generate C-centered secondary alkyl radical and N-centered anillido radical, both of which would initiate polymerization of vinylmonomer as the end groups of the polymers formed.展开更多
Alkylidenecyclopropanes undergo ceric（Ⅳ） ammonium nitrate （CAN）-mediated addition reaction with 1,3-dicarbonyl compounds leading to dihydrofuran derivatives incorporating cyclopropyl groups in moderate yields.
The homopolymerization of 5-methyl-5-hexen-2,4-dione (methacryloylacetone, MAA), a vinyl monomer having beta-diketone group, was carried out in the presence of benzophenone (BP)/N, N-dimenthyl-4-toluidine (DMT) system...The homopolymerization of 5-methyl-5-hexen-2,4-dione (methacryloylacetone, MAA), a vinyl monomer having beta-diketone group, was carried out in the presence of benzophenone (BP)/N, N-dimenthyl-4-toluidine (DMT) system. Graft polymerization of acrylamide initiated by eerie ion onto the homopolymer film was investigated and the mechanism of the grafting reaction was proposed on the basis of ESR study. The grafted copolymer was characterized by means of grafting percentage, water absorption, XPS spectra and scanning electron photomicrographs.展开更多
The initiation mechanism of acrylamide (AAM)polymerization using ceric ion/acetylacetone system as an initiator has been studied. The redox polymerization was revealed by the low value of overall activation energy of ...The initiation mechanism of acrylamide (AAM)polymerization using ceric ion/acetylacetone system as an initiator has been studied. The redox polymerization was revealed by the low value of overall activation energy of AAm polymerization. The structure of free radicals formed from above-mentioned initiation sytem were detected by radical trapping and ESR spectra techniques and the end groups of polymers obtained were determined by FT-IR spectra analysis method. Based on these results the initiation mechanism is proposed.展开更多
It is found that acetoacetanilide possesses very high promoting reactivity towards ceric ion in initiating polymerization of vinyl monomer. The kinetics of acrylamide polymerization and the activation energies were st...It is found that acetoacetanilide possesses very high promoting reactivity towards ceric ion in initiating polymerization of vinyl monomer. The kinetics of acrylamide polymerization and the activation energies were studied. The initiation mechanism of ceric/acetoacetanilide is proposed on the basis of experimental results of FT-IR and ESR.展开更多
A new method for the cleavage of carbohydrate benzylidene acetal has been developed using Ceric (YV) ammonium nitrate (CAN) [(NH4)2Ce(NO3)6] in CH3CN-H2O (10/1, v/v).
文摘Objective To observe the clinical efficacy of needling cervical Jiaji points in combination with acupoint pressing for cervical vertigo, and provide a better therapy for the clinical treatment of this disease. Methods Sixty-five patients with cervical vertigo were punctured at the points Cervical jiaji and Fengchi （风池 GB 20） bilaterally, from Qiangjian （强间 GV 18） to Naohu （脑户 GV 17）, from Yuzhen （玉枕 BL 9） to Tianzhu （天柱 BL 10） with penetrating methods, besides, acupoint pressing was also used on these points. It was given once a day, and 16 times constituted one course with 2 courses together, and then the clinical efficacy was observed. Results Twenty-five cases were cured accounting to 38.5%; 18 remarkably improved accounting to 27.7%; 19 improved accounting to 29.2%; 3 ineffective accounting to 4.6%. The total effective rate was 95.4%. Conclusion Needling cervical Jiaji points in combination with acupoint pressing can alleviate the clinical symptoms of cervical vertigo and worthy of being promoted.
基金financially supported by Priority Academic Program Development of Jiangsu Higher Education Institutions and Postgraduate Research&Practice Innovation Program of Jiangsu Province(Yangzhou University)(No.KYCX21_3205)。
文摘Catalyzed by cerium ammonium nitrate(CAN),the oxidative cracking reaction of alkenes occurred to produce carbonyls in good yields under mild conditions.The reaction employed molecular oxygen(O_(2))as the safe and clean oxidant.The catalyst dosage was reduced to as low as 0.5 mol%,while no additive was required.Thus,it may afford a generally green synthetic approach for introducing oxygen into organic molecules as well as the biomass degradation and the resource recycling from the C=C bond-containing waste polymers.X-ray photoelectron spectroscopy(XPS)analysis and control experiments demonstrated that the process proceeded via a single electron transfer(SET)reaction-initiated free radical reaction mechanism.In the process,both Ce and NO_(3)−acted as the oxygen carrier to promote the oxidation reaction.The application of the abundantly existed nitrate in CAN was found to be the key for reducing the catalyst loading.
文摘The present work describes a facile,one-pot three component synthesis of a series of 3-[（4,5-diphenyl-2-substituted aryl/heteryl）-1H-imidazol-1-yl]-1H-1,2,4-triazole-5-carboxylic acid derivatives M（1-15）.Benzil,aromatic aldehydes and 3-amino-l,2,4-triazole-5-carboxylic acid was refluxed in ethanol using cerric ammonium nitrate（CAN） as a catalyst to give the title compounds in good yields.The compounds were evaluated for their in vitro antifungal and antibacterial activity.Compounds M1,M9,and M15 were found to be equipotent against Candida albicans when compared with fluconazole.Compounds M2.M5,and M14 showed higher activity against Streptococcus pneumoniae.Escherichia coli and Streptococcus pyogenes,respectively,compared with ampicillin.Docking study of the newly synthesized compounds was performed,and the results showed good binding mode in the active sites of C albicans enzyme cytochrome P450 lanosterol 14α-demethylase.The results of in vitro antifungal activity and docking study showed that synthesized compounds had potential antifungal activity and can be further optimized and developed as a lead compound.
文摘2,4,5-Triarylimidazoles could be obtained in excellent yields by the one-pot three-component condensation of benzil/benzoin, aldehydes and ammonium acetate in the presence of catalytic amount of the inexpensive, readily available and non-toxic ceric （IV） ammonium nitrate （CAN） in aqueous media under ultrasound at room temperature. In this reaction the products were obtained in short reaction time and easy operation under mild conditions.
基金financial support received from Council of Scientific and Industrial Research(No.02(0025)/ 11/EMR-Ⅱ),New Delhi
文摘Ceric ammonium nitrate （CAN） supported HY-zeolite has been used as an efficient catalyst for the one- pot synthesis of 1,8-dioxo-octahydroxanthenes from the readily available 1,3-diketone and aromatic aldehydes under solvent-free conditions. The present methodology is cost-effective in addition to other advantages like high yields of products in shorter reaction time and simple workup procedure without the use of any injurious solvents.
文摘In the present work, graft copolymerization of polyacrylonitrile onto chitosan has been carried out in the presence of ceric ammonium nitrate redox initiator. Optimization of grafting of polyacrylonitrile onto chito-san was performed by varying the process parameters such as ceric ammonium nitrate (CAN) concentration, polyacrylonitrile concentration and reaction time to study their influence on percent grafting and grafting ef-ficiency. The optimum reaction conditions obtained for grafting of acrylonitrile onto chitosan were reaction time 55 mins, CAN concentration 1% in Con. HNO3, and polyacrylonitrile concentration 0.75 mol/L. The characterization of the grafted products by means of FTIR, thermal analysis, X-ray diffraction and scanning electron microscopy furnished the evidence of grafting of polyacrylonitrile onto chitosan.
文摘The process of dehydrogenation of methyl butenes to isoprene is conducted in the presence of iron oxide catalysts whose composition may include oxides of alkaline metals, alkaline earth metals, and transition metals. Catalysts of latest generation can also contain oxides of rare earth elements, particularly cerium oxide. However there is no any common opinion concerning its effect on catalytic properties of iron oxide catalysts. It is well known that ceric oxide has a positive effect on the quantity and stability of active centers and can play a critical role in a redox cycle of the dehydrogenation process. By means of differential thermal analysis, dispersion analysis and X-ray phase analysis, it was found in present study that introducing of ceric oxide promotes the decrease in hematite crystallite sizes. At the same time, it prevents potassium polyferrites formation, with the equilibrium of topochemical reaction between ferric oxide and po tassium carbonates moving predominantly to the formation of intermediate products–monoferrite systems, having greater catalytic activity. The increase in potassium monoferrite content results in dispersion of particles in the Fe2O3-K2CO3-СеО2 system that is accompanied by modification of texture characteristics. For this catalyst composition, the optimum concentration of ceric oxide (8.7 wt.%), leading to the formation of a certain ratio of mono- and polyferrite phases, was found. If more than 8.7 wt.% of СеО2 is introduced, the modification of texture characteristics of catalyst samples takes place, that negatively affects their selectivity.
基金the National Natural Science Foundation of China (No. 29606009).
文摘Acrylic acid was graft-copolymerized onto Rhi. oryzae's cell wall structural polysaccharide directly and efficiently in aqueous solution with eerie ammonium nitrate as initiator. The maximal grafting percentage of 135.5% was obtained under the condition of [Ce4+]=5mmol·L-1, [AA]=lmol·L-1, T=60℃ and t=3h. Graft copolymerization was suggested to proceed through free radical reaction mechanism. Grafting occurred primarily on chitosan. Acrylic acid was also attempted to be grafted onto Asp. niger cell wall structural polysaccharide, and only 44.2% of grafting percentage was resulted.
文摘Two copolymers containing p-tolylcarbamoyl pendant group poly (MAMT-co-VAc) and poly(MAMT-co-MA) were synthesized f and the graft copolymerization of AAM onto these two func-tional copolymers films initiated with ceric salt were carried out in aqueous solution for variousperiods at 30℃. The formation of graft copolymer was verified by water absorption, ESCA andSEM photographs. Based on the results of the study of the initiation mechanism of model com-pounds and ceric salt systems, the reaction mechanism of the graft copolymerization initiated withceric salt was proposed.
文摘A series of novel 3-substituted-4-hydroxycoumarin derivatives 6（a-1） were synthesized in high yield using one-pot three component coupling reaction catalyzed by ceric ammonium nitrate. These compounds were evaluated for antileishmanial activity against Leishmania donovani promastigotes and antioxidant activity（DPPH-radical scavenging activity）. Two compounds, 6h（IC50= 9.90 μmol/L） and 6i（IC50= 6.90 μmol/L） displayed potent antileishmanial activity when compared with standard antileishmanial agents pentamidine（IC50= 16.15 μmol/L） and miltefosine（IC50= 12.50 μmol/L）. Three compounds, 6c（IC50= 10.79 μmol/L）, 6h（IC50= 10.60 μmol/L）, and 6i（IC50= 10.73 μmol/L） showed significant antioxidant activity favorably with the antioxidant standards butylated hydroxy toluene（IC50= 16.47 μmol/L） and ascorbic acid（IC50= 12.69 μmol/L）. A molecular docking study of compounds 6（a-1） suggested a possible mode of binding with the Adenine phosphoribosyltransferase enzyme of L.donovani. ADME properties were predicted in silico and support the potential of 6（a-1） to show favorable drug-like properties.
基金The Project 29234093 was supported by the National Natural Science Foundation of China.
文摘Acrylamide polymerization initiated with a redox initiation system consisting of eerie ion and ethyl N,N-diethyldithiocarbamyl acetate (EDCA) has been studied. It was found that the polymerization rate equation is in good agreement with that of a redox initiated polymerization, and the overall activation energy of the polymerization was determined to be 25.2 kJ.mol(-1). Accordingly, the system belongs to a redox initiator. The initiation mechanism was proposed based on the end group analysis using FT-IR, UV spectroscopies. Analysis results revealed that the N, N-diethyldithiocarbamyl radical produced from the redox reaction of EDCA with eerie ion can initiate acrylonitrile (AN) polymerization and form the end group on PAN. The resulting PAN was photopolymerized with butyl acrylate (BE) to form PAN-b-PBA block copolymer.
文摘The polymerization of methyl acrylate was sensitive to UV light. Under UV light,the rate of polymerization is 8 times as high as the rate in dark.The overall activation energy was decreased by the UV light (313nm).A tentative explanation is given and the mechanism is discussed.
文摘The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.
文摘he initiation mechanism of ceric ion/2-benzoyl acetanilide system was studiedby means of FT-IR, EPR and kinetic studies which revealed that 2-benzoyl ac-etanilide acts as a very active promotor to the polymerization initiated by ceric ion.The initiation mechanism was then proposed which involved the complex formationbetween a ceric ion and a l ,3-diketone group or a carbamate group, followed by,thedecomposition of the complex to generate C-centered secondary alkyl radical and N-centered anillido radical, both of which would initiate polymerization of vinylmonomer as the end groups of the polymers formed.
基金the National Natural Science Foundation of China(20332060,20472072).
文摘Alkylidenecyclopropanes undergo ceric（Ⅳ） ammonium nitrate （CAN）-mediated addition reaction with 1,3-dicarbonyl compounds leading to dihydrofuran derivatives incorporating cyclopropyl groups in moderate yields.
基金The project was supported by the National Natural Science Foundation of Chna.
文摘The homopolymerization of 5-methyl-5-hexen-2,4-dione (methacryloylacetone, MAA), a vinyl monomer having beta-diketone group, was carried out in the presence of benzophenone (BP)/N, N-dimenthyl-4-toluidine (DMT) system. Graft polymerization of acrylamide initiated by eerie ion onto the homopolymer film was investigated and the mechanism of the grafting reaction was proposed on the basis of ESR study. The grafted copolymer was characterized by means of grafting percentage, water absorption, XPS spectra and scanning electron photomicrographs.
基金The project was supported by the National Natural Science Foundation of China
文摘The initiation mechanism of acrylamide (AAM)polymerization using ceric ion/acetylacetone system as an initiator has been studied. The redox polymerization was revealed by the low value of overall activation energy of AAm polymerization. The structure of free radicals formed from above-mentioned initiation sytem were detected by radical trapping and ESR spectra techniques and the end groups of polymers obtained were determined by FT-IR spectra analysis method. Based on these results the initiation mechanism is proposed.
文摘It is found that acetoacetanilide possesses very high promoting reactivity towards ceric ion in initiating polymerization of vinyl monomer. The kinetics of acrylamide polymerization and the activation energies were studied. The initiation mechanism of ceric/acetoacetanilide is proposed on the basis of experimental results of FT-IR and ESR.
文摘A new method for the cleavage of carbohydrate benzylidene acetal has been developed using Ceric (YV) ammonium nitrate (CAN) [(NH4)2Ce(NO3)6] in CH3CN-H2O (10/1, v/v).
