Purpose: The present study aimed to evaluate the effects of thermal aging on the shear bond strength of three different types of cement used to retain band and loop space maintainers cemented on extracted human perman...Purpose: The present study aimed to evaluate the effects of thermal aging on the shear bond strength of three different types of cement used to retain band and loop space maintainers cemented on extracted human permanent molar teeth. Methods: A total of 66 newly extracted permanent molars were used in this study. Eighteen teeth were used as a control and did not undergo thermal aging (six per group). All sample teeth were randomly divided into three groups: KetacCem, RelyX Luting Plus, and RelyX Unicem 2. After bonding procedures, all experimental groups undergo thermal aging. The shear bond strength of all samples was conducted using the Ultratester machine. Findings were statistically analyzed using the ANOVA and Turkey’s post hoc tests. Results: Among the examined groups, Ketac Cem presented with the highest recorded shear bond (11.4 MPa), while RelyX Luting Plus showed the lowest (3.2 MPa). The control groups recorded the highest shear bond strength compared to all examined groups;Ketac Cem showed the highest shear bond strength (12.8 Mpa), and RelyX Luting Plus had the least recorded reading (5.4 Mpa). Conclusion: Within the limitation of the present study, there was a statistically significant difference between the examined groups;Ketac Cem showed a higher shear bond cement than RelyX luting Plus and RelyX Unicem.展开更多
The effects of different post-space pretreatments on the retentive force of fiber posts cemented with a self-adhesive resin cement were investigated. Twenty-eight single-canal premolars were obturated by Resilon using...The effects of different post-space pretreatments on the retentive force of fiber posts cemented with a self-adhesive resin cement were investigated. Twenty-eight single-canal premolars were obturated by Resilon using warm vertical compaction and treated with distilled water, 2.5% NaOCl, 17% EDTA and 2.5% NaOCI; or 17% EDTA, 2.5% NaOCI, and ultrasonic agitation （U/E/N treatment）. Subsequently, radicular dentin surfaces were observed under scanning electron microscopy （SEM）. RelyX Fiber Posts were cemented in the treated canals by using RelyX U100, and thin-slice push-out test and SEM observation of coronal and apical regions of the specimens were performed. Data were analyzed using two-way ANOVA and Tukey＇s HSD post- hoc tests, and the percentage of failure type was calculated. Ultrasonic/EDTA/NaOC1 irrigation showed the maximum effectiveness in removing the smear layer and debris on the dentin surface. The apical bond strength of the experimental groups was significantly higher than that of the control group （P〈 0.05）. Adhesive failure between cement and dentin was the most common mode of failure. No obvious RDIZ or resin tag was detected. Chemical irrigants facilitated the bonding of these fiber posts, and ultrasonic activation improved retention. Future studies should evaluate the effectiveness of irrigation on fiber post push-out strength in fatigue cycling condition.展开更多
Quartz cement as syntaxial overgrowths is one of the most abundant cements in sandstones. Distribution of quartz cement in time and space indicates that the more younger the stratigraphy is, the more smaller the amoun...Quartz cement as syntaxial overgrowths is one of the most abundant cements in sandstones. Distribution of quartz cement in time and space indicates that the more younger the stratigraphy is, the more smaller the amount of quartz cement, and the amount of quartz cement increases with increasing of depth and basin type also is a factor which controls the amount of quartz cement. The sources of silica for quartz cement have many different opinions, but there is one or more dominant sources. Temperature and pH of fluid are major factors which influence the precipitation of quartz cement. There exist three hypotheses on the flow of pore fluid and transport and precipitation of silica, that is, the hypothesis of cycle of shallow underground water, the hypothesis of high concentration of fluid driven by compaction and the hypothesis of diffusion and recycle of local fluid. The research of quartz cement is significant for the timing of paleotemperature, heterogeneity of reservoir, physical property of reservoir and the timing of oil immersion, etc.展开更多
胶结充填体作为人工矿柱常受到邻近矿房开采的爆破扰动,严重影响其稳定性。基于KCC(Karagozian and Case Concrete)本构模型和ALE(Arbitrary Lagrangian-Eulerian)流固耦合算法,采用LS-DYNA软件开展胶结充填体受邻近矿房爆破扰动的数值...胶结充填体作为人工矿柱常受到邻近矿房开采的爆破扰动,严重影响其稳定性。基于KCC(Karagozian and Case Concrete)本构模型和ALE(Arbitrary Lagrangian-Eulerian)流固耦合算法,采用LS-DYNA软件开展胶结充填体受邻近矿房爆破扰动的数值模拟研究,考虑不同边孔间距(0.6、1.2、1.8、2.4 m)及养护龄期(14、21、28 d)影响,揭示充填体中爆破波传播规律,探究爆破扰动对胶结充填体的动力响应及其失稳破坏情况。结果表明:邻近采场爆破对胶结充填体的破坏损伤主要集中在边界处,为提高矿石回收率并保证充填体安全,建议采用边孔间距1.2 m方案;矿山爆破开采中充填体至少需要养护21 d;低龄期充填体矿柱顶底部区域是整个矿柱中的薄弱部分,易发生失稳,应予以重点监测。展开更多
文摘Purpose: The present study aimed to evaluate the effects of thermal aging on the shear bond strength of three different types of cement used to retain band and loop space maintainers cemented on extracted human permanent molar teeth. Methods: A total of 66 newly extracted permanent molars were used in this study. Eighteen teeth were used as a control and did not undergo thermal aging (six per group). All sample teeth were randomly divided into three groups: KetacCem, RelyX Luting Plus, and RelyX Unicem 2. After bonding procedures, all experimental groups undergo thermal aging. The shear bond strength of all samples was conducted using the Ultratester machine. Findings were statistically analyzed using the ANOVA and Turkey’s post hoc tests. Results: Among the examined groups, Ketac Cem presented with the highest recorded shear bond (11.4 MPa), while RelyX Luting Plus showed the lowest (3.2 MPa). The control groups recorded the highest shear bond strength compared to all examined groups;Ketac Cem showed the highest shear bond strength (12.8 Mpa), and RelyX Luting Plus had the least recorded reading (5.4 Mpa). Conclusion: Within the limitation of the present study, there was a statistically significant difference between the examined groups;Ketac Cem showed a higher shear bond cement than RelyX luting Plus and RelyX Unicem.
基金Funded by the National Natural Science Foundation of China(No.H1408)
文摘The effects of different post-space pretreatments on the retentive force of fiber posts cemented with a self-adhesive resin cement were investigated. Twenty-eight single-canal premolars were obturated by Resilon using warm vertical compaction and treated with distilled water, 2.5% NaOCl, 17% EDTA and 2.5% NaOCI; or 17% EDTA, 2.5% NaOCI, and ultrasonic agitation （U/E/N treatment）. Subsequently, radicular dentin surfaces were observed under scanning electron microscopy （SEM）. RelyX Fiber Posts were cemented in the treated canals by using RelyX U100, and thin-slice push-out test and SEM observation of coronal and apical regions of the specimens were performed. Data were analyzed using two-way ANOVA and Tukey＇s HSD post- hoc tests, and the percentage of failure type was calculated. Ultrasonic/EDTA/NaOC1 irrigation showed the maximum effectiveness in removing the smear layer and debris on the dentin surface. The apical bond strength of the experimental groups was significantly higher than that of the control group （P〈 0.05）. Adhesive failure between cement and dentin was the most common mode of failure. No obvious RDIZ or resin tag was detected. Chemical irrigants facilitated the bonding of these fiber posts, and ultrasonic activation improved retention. Future studies should evaluate the effectiveness of irrigation on fiber post push-out strength in fatigue cycling condition.
文摘Quartz cement as syntaxial overgrowths is one of the most abundant cements in sandstones. Distribution of quartz cement in time and space indicates that the more younger the stratigraphy is, the more smaller the amount of quartz cement, and the amount of quartz cement increases with increasing of depth and basin type also is a factor which controls the amount of quartz cement. The sources of silica for quartz cement have many different opinions, but there is one or more dominant sources. Temperature and pH of fluid are major factors which influence the precipitation of quartz cement. There exist three hypotheses on the flow of pore fluid and transport and precipitation of silica, that is, the hypothesis of cycle of shallow underground water, the hypothesis of high concentration of fluid driven by compaction and the hypothesis of diffusion and recycle of local fluid. The research of quartz cement is significant for the timing of paleotemperature, heterogeneity of reservoir, physical property of reservoir and the timing of oil immersion, etc.
文摘胶结充填体作为人工矿柱常受到邻近矿房开采的爆破扰动,严重影响其稳定性。基于KCC(Karagozian and Case Concrete)本构模型和ALE(Arbitrary Lagrangian-Eulerian)流固耦合算法,采用LS-DYNA软件开展胶结充填体受邻近矿房爆破扰动的数值模拟研究,考虑不同边孔间距(0.6、1.2、1.8、2.4 m)及养护龄期(14、21、28 d)影响,揭示充填体中爆破波传播规律,探究爆破扰动对胶结充填体的动力响应及其失稳破坏情况。结果表明:邻近采场爆破对胶结充填体的破坏损伤主要集中在边界处,为提高矿石回收率并保证充填体安全,建议采用边孔间距1.2 m方案;矿山爆破开采中充填体至少需要养护21 d;低龄期充填体矿柱顶底部区域是整个矿柱中的薄弱部分,易发生失稳,应予以重点监测。
