Using Cu-BTC prepared by hydrothermal method as precursor, carbon-based catalysts were obtained as model materials for low-temperature DeNO_x. These catalysts were characterized by X-ray diffractometry（XRD）, Raman s...Using Cu-BTC prepared by hydrothermal method as precursor, carbon-based catalysts were obtained as model materials for low-temperature DeNO_x. These catalysts were characterized by X-ray diffractometry（XRD）, Raman spectroscopy, scanning electron microscopy（SEM） and energy dispersive X-ray spectrometry（EDS）. The results showed that all carbon-based catalysts held the octahedron shape of Cu-BTC in most parts, and they mainly consisted of face-centered cubic copper. CuO_x/C exhibited excellent catalytic activity, and such catalytic activity was further improved with the introduction of Ag. The catalyst with a Cu to Ag mole ratio of 6：1 and an activated temperature of 600 °C showed the best catalytic performance, and its catalytic denitration rate reached 100% at a temperature as low as 235 °C. During the catalytic reaction process, Cu~＋ mainly played a catalytic role.展开更多
Prof.CHEN Liang’s group and Prof.LU Zhiyi’s group at the Ningbo Institute of Materials Technology and Engineering(NIMTE)of Chinese Academy of Sciences(CAS)proposed a highlyactive carbon-based catalyst.
H_2O_(2) is one of the most important chemicals in the world.Recently,the electrochemical synthesis of H_2O_(2)by two-electron oxygen reduction reaction(2e^(-)ORR)has attracted great interest.Carbon-based catalysts sh...H_2O_(2) is one of the most important chemicals in the world.Recently,the electrochemical synthesis of H_2O_(2)by two-electron oxygen reduction reaction(2e^(-)ORR)has attracted great interest.Carbon-based catalysts show great promise for electrocatalytic production of H_2O_(2),due to the ease of regulation of the carbon materials with regard to the pore structure,surface properties,and heteroatom doping.Biomass as the carbon precursor has the advantages of low cost,sustainable supply,and extensive availability.Conversion of biomass to functional carbon-based materials shows the attractive merits,such as low carbon emission in the life cycle and diversity of the obtained carbon materials due to the wide source of biomass feedstocks.In this article,a comprehensive review on the mechanisms and processes of electrochemical synthesis of H_2O_(2) by 2e^(-)ORR over carbon-based catalysts is provided.The potential biomass feedstock used for obtaining the carbon-based catalysts,and the strategies to prepare the catalysts by carbonization and heteroatom doping,as well as optimization of electrodes and design of electrolyzer,are discussed.It is recommended that future work focus on developing efficient methods to prepare the catalysts from low-cost biomass feedstock,understanding the mechanisms of 2e^(-)ORR over the catalysts,optimization of electrode materials loaded with biomass-derived catalysts,as well as development of electrolyzers for larger-scale applications.展开更多
This study demonstrates the conversion of sugarcane bagasse(SB)into single cell oil(SCO),sulfonated carbonbased catalyst and biodiesel;this process aligns with waste-to-energy and circular bioeconomy concepts.SB was t...This study demonstrates the conversion of sugarcane bagasse(SB)into single cell oil(SCO),sulfonated carbonbased catalyst and biodiesel;this process aligns with waste-to-energy and circular bioeconomy concepts.SB was treated with dilute sulfuric acid to achieve SB hydrolysate(SBH)and SB solid residue(SBS).Candida tropicalis KKU-NP1,a newly isolated yeast,accumulated SCO content of 26.5%from undetoxified SBH medium.A novel sulfonated carbon-based catalyst(SBS@SC)was generated from SBS by a one-step hydrothermal sulfonation process.It showed significant catalytic activity for the conversion of SCO-rich KKU-NP1 wet cell into biodiesel(FAME)under direct transesterification optimal conditions,with a FAME conversion yield of 90.1%.Based on FAME profile,most of the estimated physicochemical and fuel properties of FAME were within the limits of ASTM D6751 and EN 14214 for biodiesel standards.For integrated process the final production of about 12.0 g SCO,606.3 g SBS@SC catalyst and 10.8 g biodiesel from 1000 g raw SB were achieved.This study highlights the utilization of SB as a low-cost feedstock for producing multiple value-added products,emphasizing the advantages of waste utilization by integrated biorefinery concept,yielding practically no waste by-products over the whole production process.展开更多
Hydrogen peroxide(H_(2)O_(2))is an essential environmentally friendly oxidant with a wide range of applications.Compared with traditional anthraquinone processes,the electrochemical synthesis of H_(2)O_(2)via the two-...Hydrogen peroxide(H_(2)O_(2))is an essential environmentally friendly oxidant with a wide range of applications.Compared with traditional anthraquinone processes,the electrochemical synthesis of H_(2)O_(2)via the two-electron oxygen reduction reaction and two-electron water oxidation reaction offers a more promising and sustainable alternative.Carbon-based electrocatalysts playing a crucial role in these processes owing to their abundance and facile functionalization.This review focuses on the strategic design of carbon-based electrocatalysts to enhance H_(2)O_(2)production.We begin by highlighting the significance of H_(2)O_(2)and the fundamental mechanisms of electrochemical process.Subsequently,we present a detailed analysis of key factors affecting catalytic performance,concentrating electronic structure and geometric structure regulation as primary catalyst design approaches to improve H_(2)O_(2)production.Interface engineering and pH effects are also emphasized for their crucial roles.Finally,the major challenges and prospects for advancing H_(2)O_(2)production towards practical applications are discussed.展开更多
The electrochemical production of hydrogen peroxide(H_(2)O_(2))by the two-electron oxygen reduction(2e^(-)-ORR)process has the advantages of high safety,low energy consumption,and environmental friendliness.For 2e^(-)...The electrochemical production of hydrogen peroxide(H_(2)O_(2))by the two-electron oxygen reduction(2e^(-)-ORR)process has the advantages of high safety,low energy consumption,and environmental friendliness.For 2e^(-)-ORR,the catalyst/electrode is the key component as it strongly affects catalytic performance and cost.Carbon materials have the advantages of high electronic conductivity,good structural stability,easy control of nanostructures,and low cost.Therefore,it has been regarded as a promising catalyst/electrode material for the electrosynthesis of H_(2)O_(2)via 2e^(-)-ORR.In addition,studies have also considered the optimization of the liquid/gas interface by tuning the electrode surface,electrolyte pH,and reactor configurations for further improving the activity and selectivity of catalysts.In this review,we provide an in-depth discussion of the recent research on the carbon-based electrocatalysts for 2e^(-)ORR,especially in terms of microenvironment tuning,catalyst/electrode interface engineering,and reactor design for achieving stable and efficient production of H_(2)O_(2).The challenges that we are still facing and the future development prospects will then be concluded,which we believe should help the future development in this field.展开更多
Supercapacitors are gaining popularity due to their high cycling stability,power density,and fast charge and discharge rates.Researchers are ex-ploring electrode materials,electrolytes,and separat-ors for cost-effecti...Supercapacitors are gaining popularity due to their high cycling stability,power density,and fast charge and discharge rates.Researchers are ex-ploring electrode materials,electrolytes,and separat-ors for cost-effective energy storage systems.Ad-vances in materials science have led to the develop-ment of hybrid nanomaterials,such as combining fil-amentous carbon forms with inorganic nanoparticles,to create new charge and energy transfer processes.Notable materials for electrochemical energy-stor-age applications include MXenes,2D transition met-al carbides,and nitrides,carbon black,carbon aerogels,activated carbon,carbon nanotubes,conducting polymers,carbon fibers,and nanofibers,and graphene,because of their thermal,electrical,and mechanical properties.Carbon materials mixed with conducting polymers,ceramics,metal oxides,transition metal oxides,metal hydroxides,transition metal sulfides,trans-ition metal dichalcogenide,metal sulfides,carbides,nitrides,and biomass materials have received widespread attention due to their remarkable performance,eco-friendliness,cost-effectiveness,and renewability.This article explores the development of carbon-based hybrid materials for future supercapacitors,including electric double-layer capacitors,pseudocapacitors,and hy-brid supercapacitors.It investigates the difficulties that influence structural design,manufacturing(electrospinning,hydro-thermal/solvothermal,template-assisted synthesis,electrodeposition,electrospray,3D printing)techniques and the latest car-bon-based hybrid materials research offer practical solutions for producing high-performance,next-generation supercapacitors.展开更多
The kinetics of simultaneous transesterification and esterification with a carbon-based solid acid catalyst was studied.Two solid acid catalysts were prepared by the sulfonation of carbonized vegetable oil asphalt and...The kinetics of simultaneous transesterification and esterification with a carbon-based solid acid catalyst was studied.Two solid acid catalysts were prepared by the sulfonation of carbonized vegetable oil asphalt and petroleum asphalt.These catalysts were characterized on the basis of elemental analysis,acidity site concentration,the Brunauer-Emmett-Teller（BET）surface area and pore size.The kinetic parameters with the two catalysts were determined,and the reaction system can be described as a pseudo homogeneous catalyzed reaction.All the forward and reverse reactions follow second order kinetics.The calculated concentration values from the kinetic equations are in good agreement with experimental values.展开更多
Latent heat thermal energy storage(TES)effectively reduces the mismatch between energy supply and demand of renewable energy sources by the utilization of phase change materials(PCMs).However,the low thermal conductiv...Latent heat thermal energy storage(TES)effectively reduces the mismatch between energy supply and demand of renewable energy sources by the utilization of phase change materials(PCMs).However,the low thermal conductivity and poor shape stability are the main drawbacks in realizing the large-scale application of PCMs.Promisingly,developing composite PCM(CPCM)based on porous supporting mate-rial provides a desirable solution to obtain performance-enhanced PCMs with improved effective thermal conductivity and shape stability.Among all the porous matrixes as supports for PCM,three-dimensional carbon-based porous supporting material has attracted considerable attention ascribing to its high ther-mal conductivity,desirable loading capacity of PCMs,and excellent chemical compatibility with various PCMs.Therefore,this work systemically reviews the CPCMs with three-dimensional carbon-based porous supporting materials.First,a concise rule for the fabrication of CPCMs is illustrated in detail.Next,the experimental and computational research of carbon nanotube-based support,graphene-based support,graphite-based support and amorphous carbon-based support are reviewed.Then,the applications of the shape-stabilized CPCMs including thermal management and thermal conversion are illustrated.Last but not least,the challenges and prospects of the CPCMs are discussed.To conclude,introducing carbon-based porous materials can solve the liquid leakage issue and essentially improve the thermal conductivity of PCMs.However,there is still a long way to further develop a desirable CPCM with higher latent heat capacity,higher thermal conductivity,and more excellent shape stability.展开更多
Developing metal-free, carbon-based catalysts to replace platinum-based catalysts for oxygen reduction reactions （ORRs） is an emerging area of research. In recent years, different carbon structures including carbon ...Developing metal-free, carbon-based catalysts to replace platinum-based catalysts for oxygen reduction reactions （ORRs） is an emerging area of research. In recent years, different carbon structures including carbon doped with IIIA-VIIA heteroatoms （C-M site-based, where M represents the doped heteroatom） and polynitrogen （PN） compounds encapsulated in carbon nanotubes （CNTs） （N N site-based） have been synthesized. Compared to metallic catalysts, these materials are highly active, stable, inexpensive, and environmentally friendly. This review discusses the development of these materials, their ORR performances and the mechanisms for how the incorpora- tion of heteroatoms enhances the ORR activity. Strategies for tailoring the structures of the carbon substrates to improve ORR performance are also discussed. Future studies in this area will need to include optimizing synthetic strategies to control the type, amount and distribution of the incorporated heteroatoms, as well as better understanding the ORR mechanisms in these catalysts.展开更多
Fuel cells are one of the most promising clean energy devices to substitute for fossil fuel in the future to alleviate energy crisis and environmental pollution.As the key reaction on the cathode in the fuel cells,oxy...Fuel cells are one of the most promising clean energy devices to substitute for fossil fuel in the future to alleviate energy crisis and environmental pollution.As the key reaction on the cathode in the fuel cells,oxygen reduction reaction(ORR)still requires efficient noble metal catalysts such as the comme rcial Pt/C to boost the reaction for its sluggish kinetics.Therefore,it is critical to design earth-abundant carbonbased catalysts with high efficiency and long-term stability to replace the noble metal-based catalysts.This review focuses on the recent progress about carbon-based ORR catalysts including non-metal doped carbon materials,transition metal-nitrogen-carbon species,transition metal carbides/carbon,single atom catalysts,and other carbon hybrids.And we further infer that the excellent ORR performances can be achieved by the balance of geometric and electronic structures of catalysts such as conductivity,surface area,hierarchical porous structure,defect and doping effect.Additionally,the perspective development trend is also proposed to guide the rational designation of carbon-based catalysts for ORR and even extend to other energy storage and conversion fields in the future.展开更多
Improving the volumetric energy density of supercapacitors is essential for practical applications,which highly relies on the dense storage of ions in carbon-based electrodes.The functional units of carbon-based elect...Improving the volumetric energy density of supercapacitors is essential for practical applications,which highly relies on the dense storage of ions in carbon-based electrodes.The functional units of carbon-based electrode exhibit multi-scale structural characteristics including macroscopic electrode morphologies,mesoscopic microcrystals and pores,and microscopic defects and dopants in the carbon basal plane.Therefore,the ordered combination of multi-scale structures of carbon electrode is crucial for achieving dense energy storage and high volumetric performance by leveraging the functions of various scale structu re.Considering that previous reviews have focused more on the discussion of specific scale structu re of carbon electrodes,this review takes a multi-scale perspective in which recent progresses regarding the structureperformance relationship,underlying mechanism and directional design of carbon-based multi-scale structures including carbon morphology,pore structure,carbon basal plane micro-environment and electrode technology on dense energy storage and volumetric property of supercapacitors are systematically discussed.We analyzed in detail the effects of the morphology,pore,and micro-environment of carbon electrode materials on ion dense storage,summarized the specific effects of different scale structures on volumetric property and recent research progress,and proposed the mutual influence and trade-off relationship between various scale structures.In addition,the challenges and outlooks for improving the dense storage and volumetric performance of carbon-based supercapacitors are analyzed,which can provide feasible technical reference and guidance for the design and manufacture of dense carbon-based electrode materials.展开更多
Electrocatalytic carbon dioxide(CO_(2))reduction is an important way to achieve carbon neutrality by converting CO_(2)in-to high-value-added chemicals using electric energy.Carbon-based materials are widely used in va...Electrocatalytic carbon dioxide(CO_(2))reduction is an important way to achieve carbon neutrality by converting CO_(2)in-to high-value-added chemicals using electric energy.Carbon-based materials are widely used in various electrochemical reactions,including electrocatalytic CO_(2)reduction,due to their low cost and high activity.In recent years,defect engineering has attracted wide attention by constructing asymmetric defect centers in the materials,which can optimize the physicochemical properties of the mater-ial and improve its electrocatalytic activity.This review summarizes the types,methods of formation and defect characterization tech-niques of defective carbon-based materials.The advantages of defect engineering and the advantages and disadvantages of various defect formation methods and characterization techniques are also evaluated.Finally,the challenges of using defective carbon-based materials in electrocatalytic CO_(2)reduction are investigated and opportunities for their use are discussed.It is believed that this re-view will provide suggestions and guidance for developing defective carbon-based materials for CO_(2)reduction.展开更多
Proton exchange membrane fuel cell(PEMFC)has important implications for the success of clean transportation in the future.One of the key factors affecting the cost and performance of PEMFC is the cathode electrocataly...Proton exchange membrane fuel cell(PEMFC)has important implications for the success of clean transportation in the future.One of the key factors affecting the cost and performance of PEMFC is the cathode electrocatalyst for the oxygen reduction reaction(ORR)to overcome sluggish kinetics and instability in an acidic environment.As an essential component of the electrocatalyst,the support material largely determines the activity,mass transfer,charge transfer,and durability of the electrocatalyst.Thereby,the support material plays a critical role in the overall performance of the electrocatalyst.Carbonbased materials are widely used as electrocatalyst supports because of their high porosity,conductivity,chemical stability,and tunable morphology.Recently,some new carbon-based materials with excellent structure have been introduced,such as carbon nanotubes,carbon nanowires,graphene,metal-organic framework(MOF)-derived carbon,and biomass-derived carbon materials.Combined with a variety of strategies,such as controllable construction of porous structures and surface defects,proper doping heteroatoms,the ingenious design of model electrocatalysts,and predictive theoretical calculation,a new reliable path was provided for further improving the performance of electrocatalysts and exploring the catalytic mechanism.Based on the topic of carbon-based materials for ORR in acidic medium,this review summarizes the up-to-date progress and breakthroughs,highlights the factors affecting the catalytic activity and stability of ORR electrocatalysts in acids,and discusses their future application and development.展开更多
With the rapid development of industry,the environmental problems caused by heavy metal arsenic and antimony are becoming increasingly serious.Therefore,it is urgent to solve the problem of arsenic and antimony pollut...With the rapid development of industry,the environmental problems caused by heavy metal arsenic and antimony are becoming increasingly serious.Therefore,it is urgent to solve the problem of arsenic and antimony pollution in the water environment.Renewable carbon-based materials,as a kind of adsorbent widely used in wastewater treatment,have been the focus of scholars’research for many years.In this review,the preparation methods,characteristics,and applications of renewable carbon-based materials(biochar,activated carbon,carbon nanotubes,and graphene)for the removal of arsenic and antimony are described in detail.Based on adsorption kinetics,isothermal adsorption,temperature,pH,and coexisting ions,we discuss the process of adsorption of arsenic and antimony by renewable carbon-based materials,explore the mechanism of adsorption of anions in water by renewable carbon-basedmaterials,and comparatively analyze the differences in adsorption performance of arsenic and antimony by different renewable carbon-based materials.Compared with biochar,activated carbon,carbon nanotube,and graphene renewable materials loaded with iron-manganese oxides have better removal effects on arsenic and antimony wastewater.Extensive research data shows that biochar,as a renewable material,is recommended,followed by activated carbon.Both are recommended because of their excellent adsorption properties and low production costs.Finally,the prospects and challenges of the application of renewable carbon-based materials in wastewater treatment are discussed,and the directions and development trends of future research are pointed out,which provide references and insights for further promoting the application of renewable carbon-based materials in wastewater treatment.展开更多
Based on starch and series of alkyl benzene sulfonic acid as the materials, a novel carbon-based solid acid catalyst is synthesized using hydrothermal method. This catalyst exhibits much higher catalytic activity in t...Based on starch and series of alkyl benzene sulfonic acid as the materials, a novel carbon-based solid acid catalyst is synthesized using hydrothermal method. This catalyst exhibits much higher catalytic activity in the reaction of esterification of Mono-fatty alcohol polyoxyethylene maleate esters with 1,4-butanediol. The structure of carbon-based solid acid catalyst was charactered by IR and XRD, characterizations showed that this catalyst exhibited high –SO3H loading. Reusability of the carbon-based solid acid catalyst for esterification showed that after recycling five times the activity remained unchanged.展开更多
Sodium ion batteries(SIBs)are one of the most prospective energy storage devices recently.Carbon materials have been commonly used as anode materials for SIBs because of their wide sources and low price.However,pure c...Sodium ion batteries(SIBs)are one of the most prospective energy storage devices recently.Carbon materials have been commonly used as anode materials for SIBs because of their wide sources and low price.However,pure carbon materials still have the disadvantage of low theoretical capacity.New design and preparation strategies for carbon-based composites can overcome the problems.Based on the analysis of Na^(+)storage mechanism of carbon-based composite materials,the factors influencing the performance of SIBs are discussed.Adjustment methods for improving the electrochemical performance of electrodes are evaluated in detail,including carbon skeleton design and composite material selection.Some advanced composite materials,i.e.,carbon-conversion composite and carbon-MXene composite,are also being explored.New advances in flexible electrodes based on carbon-based composite on flexible SIBs is investigated.The existing issues and future issues of carbon-based composite materials are discussed.展开更多
Microbial chain elongation(CE),utilizing anaerobic fermentation for the synthesis of high-value medium chain fatty acids(MCFAs),merges as a promising strategy in resource sustainability.Recently,it has pivoted that th...Microbial chain elongation(CE),utilizing anaerobic fermentation for the synthesis of high-value medium chain fatty acids(MCFAs),merges as a promising strategy in resource sustainability.Recently,it has pivoted that the use of different types of additives or accelerantstowards enhancing the products yield and fermentation quality has got much attention,with carbon-based materials emerging as vital facilitators.Based on bibliometrics insights,this paper firstly commences with a comprehensive review of the past two decades’progress in applying carbon-based materials within anaerobic fermentation contexts.Subsequently,the recent advancements made by different research groups in order to enhance the performance of CE systemperformance are reviewed,with particular focus on the application,impact,and underlying mechanisms of carbon-based materials in expediting MCFAs biosynthesis via CE.Finally,the future research direction is prospected,aiming to inform innovative material design and sophisticated technological applications,as well as provide a reference for improving the efficiency of anaerobic fermentation of MCFAs using carbon-based material,thereby contributing to the broader discourse on enhancing sustainability and efficiency in bio-based processes.展开更多
Carbon-based materials have been widely applied for pollutant removal relying on their rich pore structure,functional groups,chemical stability,and expandability.However,the traditional manufacturing process of carbon...Carbon-based materials have been widely applied for pollutant removal relying on their rich pore structure,functional groups,chemical stability,and expandability.However,the traditional manufacturing process of carbon materials based on organic compounds pyrolysis is high energy-consuming and high-emission,which is not conducive to addressing the climate crisis and achieving the goal of carbon neutrality.Molten salt electrolysis technology enables the direct capture and reduction of CO_(2)to produce solid carbon,resulting in significant environmental benefits while achieving carbon emissions reduction.The molten salt also has a purification function,enabling the production of high-purity carbon materials.The kinetics of the electrochemical reduction process can be easily controlled,and the co-reduction of multiple elements provides convenience for the in-situ optimization of carbon material structure and the expansion of its applications.Therefore,this review focuses on the thermodynamics&kinetics processes of molten salt capture and electrochemical reduction of CO_(2)to prepare carbon materials.It further reviews the recent research progress on the preparation of carbon materials for pollutant removal based on molten salt electrochemical processes for the first time.Finally,we analyze the advantages and challenges of the current molten salt electrochemical processes and offers prospects for future research directions.展开更多
Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen e...Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.展开更多
基金Project(738010004)supported by the Project of Low Concentration Sulfur Dioxide Flue Gas Treatment,ChinaProject(2017GK4010)supported by the Scientific and Technological Breakthrough and Major Achievements Transformation of Strategic Emerging Industries of Hunan Province in 2017,China
文摘Using Cu-BTC prepared by hydrothermal method as precursor, carbon-based catalysts were obtained as model materials for low-temperature DeNO_x. These catalysts were characterized by X-ray diffractometry（XRD）, Raman spectroscopy, scanning electron microscopy（SEM） and energy dispersive X-ray spectrometry（EDS）. The results showed that all carbon-based catalysts held the octahedron shape of Cu-BTC in most parts, and they mainly consisted of face-centered cubic copper. CuO_x/C exhibited excellent catalytic activity, and such catalytic activity was further improved with the introduction of Ag. The catalyst with a Cu to Ag mole ratio of 6：1 and an activated temperature of 600 °C showed the best catalytic performance, and its catalytic denitration rate reached 100% at a temperature as low as 235 °C. During the catalytic reaction process, Cu~＋ mainly played a catalytic role.
文摘Prof.CHEN Liang’s group and Prof.LU Zhiyi’s group at the Ningbo Institute of Materials Technology and Engineering(NIMTE)of Chinese Academy of Sciences(CAS)proposed a highlyactive carbon-based catalyst.
基金supported by the National Natural Science Foundation of China(Nos.22478222,22178197,and U23A6005)the Dr.Jentai Yang Sustainable Environmental Protection and Eco-humanistic Education Fund(No.20253000027)which isadministered by the Overseas Chinese Environmental Engineers and Scientists Association。
文摘H_2O_(2) is one of the most important chemicals in the world.Recently,the electrochemical synthesis of H_2O_(2)by two-electron oxygen reduction reaction(2e^(-)ORR)has attracted great interest.Carbon-based catalysts show great promise for electrocatalytic production of H_2O_(2),due to the ease of regulation of the carbon materials with regard to the pore structure,surface properties,and heteroatom doping.Biomass as the carbon precursor has the advantages of low cost,sustainable supply,and extensive availability.Conversion of biomass to functional carbon-based materials shows the attractive merits,such as low carbon emission in the life cycle and diversity of the obtained carbon materials due to the wide source of biomass feedstocks.In this article,a comprehensive review on the mechanisms and processes of electrochemical synthesis of H_2O_(2) by 2e^(-)ORR over carbon-based catalysts is provided.The potential biomass feedstock used for obtaining the carbon-based catalysts,and the strategies to prepare the catalysts by carbonization and heteroatom doping,as well as optimization of electrodes and design of electrolyzer,are discussed.It is recommended that future work focus on developing efficient methods to prepare the catalysts from low-cost biomass feedstock,understanding the mechanisms of 2e^(-)ORR over the catalysts,optimization of electrode materials loaded with biomass-derived catalysts,as well as development of electrolyzers for larger-scale applications.
基金supported by the“Research and Graduate Studies”,Khon Kaen University,Thailand under the Research Program in the fiscal year 2023(Grant number:RP66-3-001).
文摘This study demonstrates the conversion of sugarcane bagasse(SB)into single cell oil(SCO),sulfonated carbonbased catalyst and biodiesel;this process aligns with waste-to-energy and circular bioeconomy concepts.SB was treated with dilute sulfuric acid to achieve SB hydrolysate(SBH)and SB solid residue(SBS).Candida tropicalis KKU-NP1,a newly isolated yeast,accumulated SCO content of 26.5%from undetoxified SBH medium.A novel sulfonated carbon-based catalyst(SBS@SC)was generated from SBS by a one-step hydrothermal sulfonation process.It showed significant catalytic activity for the conversion of SCO-rich KKU-NP1 wet cell into biodiesel(FAME)under direct transesterification optimal conditions,with a FAME conversion yield of 90.1%.Based on FAME profile,most of the estimated physicochemical and fuel properties of FAME were within the limits of ASTM D6751 and EN 14214 for biodiesel standards.For integrated process the final production of about 12.0 g SCO,606.3 g SBS@SC catalyst and 10.8 g biodiesel from 1000 g raw SB were achieved.This study highlights the utilization of SB as a low-cost feedstock for producing multiple value-added products,emphasizing the advantages of waste utilization by integrated biorefinery concept,yielding practically no waste by-products over the whole production process.
基金funding supporting from the National Natural Science Foundation of China(Grant No.22125903,22439003,22309176)National Key R@D Program of China(Grants 2022YFA1504100)+2 种基金DICP(DICP I202471)the State Key Laboratory of Catalysis(No:2024SKL-A-001)Energy Revolution S&T Program of Yulin Innovation Institute of Clean Energy(Grant E412010508,Grant E411070316)。
文摘Hydrogen peroxide(H_(2)O_(2))is an essential environmentally friendly oxidant with a wide range of applications.Compared with traditional anthraquinone processes,the electrochemical synthesis of H_(2)O_(2)via the two-electron oxygen reduction reaction and two-electron water oxidation reaction offers a more promising and sustainable alternative.Carbon-based electrocatalysts playing a crucial role in these processes owing to their abundance and facile functionalization.This review focuses on the strategic design of carbon-based electrocatalysts to enhance H_(2)O_(2)production.We begin by highlighting the significance of H_(2)O_(2)and the fundamental mechanisms of electrochemical process.Subsequently,we present a detailed analysis of key factors affecting catalytic performance,concentrating electronic structure and geometric structure regulation as primary catalyst design approaches to improve H_(2)O_(2)production.Interface engineering and pH effects are also emphasized for their crucial roles.Finally,the major challenges and prospects for advancing H_(2)O_(2)production towards practical applications are discussed.
基金supported by the National Natural Science Foundation of China(No.22379111 and 22179093).
文摘The electrochemical production of hydrogen peroxide(H_(2)O_(2))by the two-electron oxygen reduction(2e^(-)-ORR)process has the advantages of high safety,low energy consumption,and environmental friendliness.For 2e^(-)-ORR,the catalyst/electrode is the key component as it strongly affects catalytic performance and cost.Carbon materials have the advantages of high electronic conductivity,good structural stability,easy control of nanostructures,and low cost.Therefore,it has been regarded as a promising catalyst/electrode material for the electrosynthesis of H_(2)O_(2)via 2e^(-)-ORR.In addition,studies have also considered the optimization of the liquid/gas interface by tuning the electrode surface,electrolyte pH,and reactor configurations for further improving the activity and selectivity of catalysts.In this review,we provide an in-depth discussion of the recent research on the carbon-based electrocatalysts for 2e^(-)ORR,especially in terms of microenvironment tuning,catalyst/electrode interface engineering,and reactor design for achieving stable and efficient production of H_(2)O_(2).The challenges that we are still facing and the future development prospects will then be concluded,which we believe should help the future development in this field.
文摘Supercapacitors are gaining popularity due to their high cycling stability,power density,and fast charge and discharge rates.Researchers are ex-ploring electrode materials,electrolytes,and separat-ors for cost-effective energy storage systems.Ad-vances in materials science have led to the develop-ment of hybrid nanomaterials,such as combining fil-amentous carbon forms with inorganic nanoparticles,to create new charge and energy transfer processes.Notable materials for electrochemical energy-stor-age applications include MXenes,2D transition met-al carbides,and nitrides,carbon black,carbon aerogels,activated carbon,carbon nanotubes,conducting polymers,carbon fibers,and nanofibers,and graphene,because of their thermal,electrical,and mechanical properties.Carbon materials mixed with conducting polymers,ceramics,metal oxides,transition metal oxides,metal hydroxides,transition metal sulfides,trans-ition metal dichalcogenide,metal sulfides,carbides,nitrides,and biomass materials have received widespread attention due to their remarkable performance,eco-friendliness,cost-effectiveness,and renewability.This article explores the development of carbon-based hybrid materials for future supercapacitors,including electric double-layer capacitors,pseudocapacitors,and hy-brid supercapacitors.It investigates the difficulties that influence structural design,manufacturing(electrospinning,hydro-thermal/solvothermal,template-assisted synthesis,electrodeposition,electrospray,3D printing)techniques and the latest car-bon-based hybrid materials research offer practical solutions for producing high-performance,next-generation supercapacitors.
文摘The kinetics of simultaneous transesterification and esterification with a carbon-based solid acid catalyst was studied.Two solid acid catalysts were prepared by the sulfonation of carbonized vegetable oil asphalt and petroleum asphalt.These catalysts were characterized on the basis of elemental analysis,acidity site concentration,the Brunauer-Emmett-Teller（BET）surface area and pore size.The kinetic parameters with the two catalysts were determined,and the reaction system can be described as a pseudo homogeneous catalyzed reaction.All the forward and reverse reactions follow second order kinetics.The calculated concentration values from the kinetic equations are in good agreement with experimental values.
基金supported by the National Natural Science Foundation of China(No.52127816),the National Key Research and Development Program of China(No.2020YFA0715000)the National Natural Science and Hong Kong Research Grant Council Joint Research Funding Project of China(No.5181101182)the NSFC/RGC Joint Research Scheme sponsored by the Research Grants Council of Hong Kong and the National Natural Science Foundation of China(No.N_PolyU513/18).
文摘Latent heat thermal energy storage(TES)effectively reduces the mismatch between energy supply and demand of renewable energy sources by the utilization of phase change materials(PCMs).However,the low thermal conductivity and poor shape stability are the main drawbacks in realizing the large-scale application of PCMs.Promisingly,developing composite PCM(CPCM)based on porous supporting mate-rial provides a desirable solution to obtain performance-enhanced PCMs with improved effective thermal conductivity and shape stability.Among all the porous matrixes as supports for PCM,three-dimensional carbon-based porous supporting material has attracted considerable attention ascribing to its high ther-mal conductivity,desirable loading capacity of PCMs,and excellent chemical compatibility with various PCMs.Therefore,this work systemically reviews the CPCMs with three-dimensional carbon-based porous supporting materials.First,a concise rule for the fabrication of CPCMs is illustrated in detail.Next,the experimental and computational research of carbon nanotube-based support,graphene-based support,graphite-based support and amorphous carbon-based support are reviewed.Then,the applications of the shape-stabilized CPCMs including thermal management and thermal conversion are illustrated.Last but not least,the challenges and prospects of the CPCMs are discussed.To conclude,introducing carbon-based porous materials can solve the liquid leakage issue and essentially improve the thermal conductivity of PCMs.However,there is still a long way to further develop a desirable CPCM with higher latent heat capacity,higher thermal conductivity,and more excellent shape stability.
文摘Developing metal-free, carbon-based catalysts to replace platinum-based catalysts for oxygen reduction reactions （ORRs） is an emerging area of research. In recent years, different carbon structures including carbon doped with IIIA-VIIA heteroatoms （C-M site-based, where M represents the doped heteroatom） and polynitrogen （PN） compounds encapsulated in carbon nanotubes （CNTs） （N N site-based） have been synthesized. Compared to metallic catalysts, these materials are highly active, stable, inexpensive, and environmentally friendly. This review discusses the development of these materials, their ORR performances and the mechanisms for how the incorpora- tion of heteroatoms enhances the ORR activity. Strategies for tailoring the structures of the carbon substrates to improve ORR performance are also discussed. Future studies in this area will need to include optimizing synthetic strategies to control the type, amount and distribution of the incorporated heteroatoms, as well as better understanding the ORR mechanisms in these catalysts.
基金supported by the National Natural Science Foundation of China(Nos.21675147 and 21802003)the Jilin Provincial Science and Technology Development Program(Nos.20190201242JC,20180520142JH)the China Postdoctoral Science Foundation(No.2018M631239)。
文摘Fuel cells are one of the most promising clean energy devices to substitute for fossil fuel in the future to alleviate energy crisis and environmental pollution.As the key reaction on the cathode in the fuel cells,oxygen reduction reaction(ORR)still requires efficient noble metal catalysts such as the comme rcial Pt/C to boost the reaction for its sluggish kinetics.Therefore,it is critical to design earth-abundant carbonbased catalysts with high efficiency and long-term stability to replace the noble metal-based catalysts.This review focuses on the recent progress about carbon-based ORR catalysts including non-metal doped carbon materials,transition metal-nitrogen-carbon species,transition metal carbides/carbon,single atom catalysts,and other carbon hybrids.And we further infer that the excellent ORR performances can be achieved by the balance of geometric and electronic structures of catalysts such as conductivity,surface area,hierarchical porous structure,defect and doping effect.Additionally,the perspective development trend is also proposed to guide the rational designation of carbon-based catalysts for ORR and even extend to other energy storage and conversion fields in the future.
基金funded by the Joint Fund for Regional Innovation and Development of National Natural Science Foundation of China(U21A20143)the National Science Fund for Excellent Young Scholars(52322607)the Excellent Youth Foundation of Heilongjiang Scientific Committee(YQ2022E028)。
文摘Improving the volumetric energy density of supercapacitors is essential for practical applications,which highly relies on the dense storage of ions in carbon-based electrodes.The functional units of carbon-based electrode exhibit multi-scale structural characteristics including macroscopic electrode morphologies,mesoscopic microcrystals and pores,and microscopic defects and dopants in the carbon basal plane.Therefore,the ordered combination of multi-scale structures of carbon electrode is crucial for achieving dense energy storage and high volumetric performance by leveraging the functions of various scale structu re.Considering that previous reviews have focused more on the discussion of specific scale structu re of carbon electrodes,this review takes a multi-scale perspective in which recent progresses regarding the structureperformance relationship,underlying mechanism and directional design of carbon-based multi-scale structures including carbon morphology,pore structure,carbon basal plane micro-environment and electrode technology on dense energy storage and volumetric property of supercapacitors are systematically discussed.We analyzed in detail the effects of the morphology,pore,and micro-environment of carbon electrode materials on ion dense storage,summarized the specific effects of different scale structures on volumetric property and recent research progress,and proposed the mutual influence and trade-off relationship between various scale structures.In addition,the challenges and outlooks for improving the dense storage and volumetric performance of carbon-based supercapacitors are analyzed,which can provide feasible technical reference and guidance for the design and manufacture of dense carbon-based electrode materials.
文摘Electrocatalytic carbon dioxide(CO_(2))reduction is an important way to achieve carbon neutrality by converting CO_(2)in-to high-value-added chemicals using electric energy.Carbon-based materials are widely used in various electrochemical reactions,including electrocatalytic CO_(2)reduction,due to their low cost and high activity.In recent years,defect engineering has attracted wide attention by constructing asymmetric defect centers in the materials,which can optimize the physicochemical properties of the mater-ial and improve its electrocatalytic activity.This review summarizes the types,methods of formation and defect characterization tech-niques of defective carbon-based materials.The advantages of defect engineering and the advantages and disadvantages of various defect formation methods and characterization techniques are also evaluated.Finally,the challenges of using defective carbon-based materials in electrocatalytic CO_(2)reduction are investigated and opportunities for their use are discussed.It is believed that this re-view will provide suggestions and guidance for developing defective carbon-based materials for CO_(2)reduction.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.U1710256 and U1810115)the Shanxi Science and Technology Major Project(Grant Nos.20181102019 and 20201101016)。
文摘Proton exchange membrane fuel cell(PEMFC)has important implications for the success of clean transportation in the future.One of the key factors affecting the cost and performance of PEMFC is the cathode electrocatalyst for the oxygen reduction reaction(ORR)to overcome sluggish kinetics and instability in an acidic environment.As an essential component of the electrocatalyst,the support material largely determines the activity,mass transfer,charge transfer,and durability of the electrocatalyst.Thereby,the support material plays a critical role in the overall performance of the electrocatalyst.Carbonbased materials are widely used as electrocatalyst supports because of their high porosity,conductivity,chemical stability,and tunable morphology.Recently,some new carbon-based materials with excellent structure have been introduced,such as carbon nanotubes,carbon nanowires,graphene,metal-organic framework(MOF)-derived carbon,and biomass-derived carbon materials.Combined with a variety of strategies,such as controllable construction of porous structures and surface defects,proper doping heteroatoms,the ingenious design of model electrocatalysts,and predictive theoretical calculation,a new reliable path was provided for further improving the performance of electrocatalysts and exploring the catalytic mechanism.Based on the topic of carbon-based materials for ORR in acidic medium,this review summarizes the up-to-date progress and breakthroughs,highlights the factors affecting the catalytic activity and stability of ORR electrocatalysts in acids,and discusses their future application and development.
基金funded by the following grants,including the Key Research and Development Programof Shaanxi Province(Nos.2023-LL-QY-42,2024NC-ZDCYL-02-05)the Xi’an University of Architecture and Technology Research Initiation Grant Program(No.1960323102)+1 种基金the Xi’an University of Architecture and Technology Special Program for Cultivation of Frontier Interdisciplinary Fields(No.X20230079)the Open Fund for the Key Laboratory of Soil and Plant Nutrition of Ningxia(No.ZHS202401).
文摘With the rapid development of industry,the environmental problems caused by heavy metal arsenic and antimony are becoming increasingly serious.Therefore,it is urgent to solve the problem of arsenic and antimony pollution in the water environment.Renewable carbon-based materials,as a kind of adsorbent widely used in wastewater treatment,have been the focus of scholars’research for many years.In this review,the preparation methods,characteristics,and applications of renewable carbon-based materials(biochar,activated carbon,carbon nanotubes,and graphene)for the removal of arsenic and antimony are described in detail.Based on adsorption kinetics,isothermal adsorption,temperature,pH,and coexisting ions,we discuss the process of adsorption of arsenic and antimony by renewable carbon-based materials,explore the mechanism of adsorption of anions in water by renewable carbon-basedmaterials,and comparatively analyze the differences in adsorption performance of arsenic and antimony by different renewable carbon-based materials.Compared with biochar,activated carbon,carbon nanotube,and graphene renewable materials loaded with iron-manganese oxides have better removal effects on arsenic and antimony wastewater.Extensive research data shows that biochar,as a renewable material,is recommended,followed by activated carbon.Both are recommended because of their excellent adsorption properties and low production costs.Finally,the prospects and challenges of the application of renewable carbon-based materials in wastewater treatment are discussed,and the directions and development trends of future research are pointed out,which provide references and insights for further promoting the application of renewable carbon-based materials in wastewater treatment.
文摘Based on starch and series of alkyl benzene sulfonic acid as the materials, a novel carbon-based solid acid catalyst is synthesized using hydrothermal method. This catalyst exhibits much higher catalytic activity in the reaction of esterification of Mono-fatty alcohol polyoxyethylene maleate esters with 1,4-butanediol. The structure of carbon-based solid acid catalyst was charactered by IR and XRD, characterizations showed that this catalyst exhibited high –SO3H loading. Reusability of the carbon-based solid acid catalyst for esterification showed that after recycling five times the activity remained unchanged.
基金support from the National Natural Science Foundation of China(52376216,52006194,52006191)the Key Research and Development Program of Shaanxi(2023-YBGY-054).
文摘Sodium ion batteries(SIBs)are one of the most prospective energy storage devices recently.Carbon materials have been commonly used as anode materials for SIBs because of their wide sources and low price.However,pure carbon materials still have the disadvantage of low theoretical capacity.New design and preparation strategies for carbon-based composites can overcome the problems.Based on the analysis of Na^(+)storage mechanism of carbon-based composite materials,the factors influencing the performance of SIBs are discussed.Adjustment methods for improving the electrochemical performance of electrodes are evaluated in detail,including carbon skeleton design and composite material selection.Some advanced composite materials,i.e.,carbon-conversion composite and carbon-MXene composite,are also being explored.New advances in flexible electrodes based on carbon-based composite on flexible SIBs is investigated.The existing issues and future issues of carbon-based composite materials are discussed.
基金financially supported by the National Key R&D Program of China(No.2019YFC1906600)the National Natural Science Foundation of China(No.52000132).
文摘Microbial chain elongation(CE),utilizing anaerobic fermentation for the synthesis of high-value medium chain fatty acids(MCFAs),merges as a promising strategy in resource sustainability.Recently,it has pivoted that the use of different types of additives or accelerantstowards enhancing the products yield and fermentation quality has got much attention,with carbon-based materials emerging as vital facilitators.Based on bibliometrics insights,this paper firstly commences with a comprehensive review of the past two decades’progress in applying carbon-based materials within anaerobic fermentation contexts.Subsequently,the recent advancements made by different research groups in order to enhance the performance of CE systemperformance are reviewed,with particular focus on the application,impact,and underlying mechanisms of carbon-based materials in expediting MCFAs biosynthesis via CE.Finally,the future research direction is prospected,aiming to inform innovative material design and sophisticated technological applications,as well as provide a reference for improving the efficiency of anaerobic fermentation of MCFAs using carbon-based material,thereby contributing to the broader discourse on enhancing sustainability and efficiency in bio-based processes.
基金supported by the National Natural Science Foundation of China(Nos.52200143,51979011 and 52276208)the Natural Science Foundation of Hubei Province(No.2024AFB546)the Fundamental Research Funds for Central Public Welfare Research Institutes(Nos.CKSF2023302/CL and CKSF2023314/CL).
文摘Carbon-based materials have been widely applied for pollutant removal relying on their rich pore structure,functional groups,chemical stability,and expandability.However,the traditional manufacturing process of carbon materials based on organic compounds pyrolysis is high energy-consuming and high-emission,which is not conducive to addressing the climate crisis and achieving the goal of carbon neutrality.Molten salt electrolysis technology enables the direct capture and reduction of CO_(2)to produce solid carbon,resulting in significant environmental benefits while achieving carbon emissions reduction.The molten salt also has a purification function,enabling the production of high-purity carbon materials.The kinetics of the electrochemical reduction process can be easily controlled,and the co-reduction of multiple elements provides convenience for the in-situ optimization of carbon material structure and the expansion of its applications.Therefore,this review focuses on the thermodynamics&kinetics processes of molten salt capture and electrochemical reduction of CO_(2)to prepare carbon materials.It further reviews the recent research progress on the preparation of carbon materials for pollutant removal based on molten salt electrochemical processes for the first time.Finally,we analyze the advantages and challenges of the current molten salt electrochemical processes and offers prospects for future research directions.
基金Supported by the National Natural Science Foundation of China(No.52273056)the Science and Technology Development Program of Jilin Province,China(No.YDZJ202501ZYTS305)。
文摘Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.
