Forest carbon sinks are crucial for mitigating urban climate change.Their effectiveness depends on the balance between gross carbon losses and gains.However,quantitative and continuous monitoring of forest change/dist...Forest carbon sinks are crucial for mitigating urban climate change.Their effectiveness depends on the balance between gross carbon losses and gains.However,quantitative and continuous monitoring of forest change/disturbance carbon fluxes is still insufficient.To address this gap,we integrated an improved spatial carbon bookkeeping(SBK)model with the continuous change detection and classification(CCDC)algorithm,long-term Landsat observations,and ground measurements to track carbon emissions,uptakes,and net changes from forest cover changes in the Yangtze River Delta(YRD)of China from 2000 to 2020.The SBK model was refined by incorporating heterogeneous carbon response functions.Our results reveal that carbon emissions(-3.88 Tg C·year^(-1))were four times greater than carbon uptakes(0.93 Tg C·year^(-1))from forest cover changes in the YRD during 2000-2020,despite a net forest cover gain of 10.95×10^(4) ha.These findings indicate that the carbon effect per hectare of forest cover loss is approximately 4.5 times that of forest cover gain.The asymmetric carbon effect suggests that forest cover change may act as a carbon source even with net-zero or net-positive forest cover change.Furthermore,carbon uptakes from forest gains in the YRD during 2000-2020 could only offset 0.28% of energy-related carbon emissions from 2000 to 2019.Urban and agricultural expansions accounted for 37% and 10% of carbon emissions,respectively,while the Grain for Green Project contributed to 45% of carbon uptakes.Our findings underscore the necessity of understanding the asymmetric carbon effects of forest cover loss and gain to accurately assess the capacity of forest carbon sinks.展开更多
With the goal of achieving carbon peak and carbon neutrality,this paper studies the carbon effect of agricultural land remediation.In this paper,the carbon effect mechanism and calculation method of land consolidation...With the goal of achieving carbon peak and carbon neutrality,this paper studies the carbon effect of agricultural land remediation.In this paper,the carbon effect mechanism and calculation method of land consolidation,the proposed national carbon peaking and carbon neutrality goals,and the requirements put forward by agricultural land consolidation followed were analyzed.Then,the application research on the carbon effect accounting of agricultural land consolidation was conducted.Besides,the application process of carbon effect accounting of land consolidation with the goals of carbon peaking and carbon neutrality.Therefore,we hope this study will play an effective role to advance the carbon effect research in the regulation of agricultural land.展开更多
Exploring carbon emission effects based on the evolution of residents’ dietary structure to achieve the carbon neutrality goal and mitigate climate change is an important task.This study took China as the research ob...Exploring carbon emission effects based on the evolution of residents’ dietary structure to achieve the carbon neutrality goal and mitigate climate change is an important task.This study took China as the research object(data excluding Hong Kong,Macao and Taiwan) and used the carbon emission coefficient method to quantitatively measure the food carbon emissions from 1987–2020,then analyzed the carbon emission effects under the evolution of dietary structure.The results showed that during the study period,the Chinese dietary structure gradually changed to a high-carbon consumption pattern.The dietary structure of urban residents developed to a balanced one,while that of rural residents developed to a high-quality one.During the study period,the per capita food carbon emissions and total food consumption of Chinese showed an increasing trend.The per capita food carbon emissions of residents in urban and rural showed an overall upward trend.The total food carbon emissions in urban increased significantly,while that in rural increased first and then decreased.The influence of beef and mutton on carbon emissions is the highest in dietary structure.Compared with the balanced dietary pattern,the food carbon emissions of Chinese residents had not yet reached the peak,but were evolving to a high-carbon consumption pattern.展开更多
The potential （E）-dependent vibrational behavior of a saturated CO adlayer on Au-core Pd-shell nanoparticle film electrodes was investigated over a wide potential range, in acidic, neutral, and basic solutions, usin...The potential （E）-dependent vibrational behavior of a saturated CO adlayer on Au-core Pd-shell nanoparticle film electrodes was investigated over a wide potential range, in acidic, neutral, and basic solutions, using in situ surface-enhanced Raman spectroscopy （SERS）. Over the whole of the examined potential region （-1.5 to 0.55 V vs. NHE）, the peak frequencies of both the C-OM and the Pd-COM band （here, M denotes the multiply-bonded configuration） displayed three distinct linear regions： dvc oM/dE decreased from -185-207 （from -1.5 to -1.2 V） to -83-84 cm-1/V （-1.2 to -0.15 V）, and then to 43 cm-1/V （-0.2 to 0.55 V）; on the other hand, dvpd coM/dE changed from -10 to -8 cm I/V （from -1.5 to -1.2 V） to ^-31 to -30 cm-1/V （-1.2 to -0.15 V）, and then to -15 cm-1/V （-0.2 to 0.55 V）. The simultaneously recorded cyclic voltammograms revealed that at E 〈 -1.2 V, a hydro- gen evolution reaction （HER） occurred. With the help of periodic density functional theory calcula- tions using two different （2 × 2）-3CO slab models with Pd（111）, the unusually high dvc-oM/dE and the small dVPd-CoM/dE in the HER region were explained as being due to the conversion of COad from bridge to hollow sites, which was induced by the co-adsorbed hydrogen atoms formed from dissociated water at negative potentials.展开更多
Employing decoupling index and industrial structure characteristic bias index methods, this study analyzed the spatial-temporal characteristics of industrial structure transformations and their resulting carbon emissi...Employing decoupling index and industrial structure characteristic bias index methods, this study analyzed the spatial-temporal characteristics of industrial structure transformations and their resulting carbon emissions in the Xuzhou Metropolitan Area from 2000 to 2014, with a focus on their relationships and driving factors. Our research indicates that carbon emission intensity from industrial structures in the Xuzhou Metropolitan Area at first showed an increasing trend, which then decreased. Furthermore, the relationship between emissions and industrial economic growth has been trending toward absolute decoupling. From the perspective of the center-periphery, the Xuzhou Metropolitan Area formed a concentric pattern, where both progress towards low emissions and the level of technological advancement gradually diminished from the center to the periphery. In terms of variation across provinces, the ISCB index in the eastern Henan has decreased the slowest, followed by the southern Shandong and the northern Anhui, with the northern Jiangsu ranking last. During this period, resource-and labor-intensive industries were the primary growth industries in the northern Anhui and the eastern Henan, while labor-intensive industries dominated the southern Shandong and capital-intensive industries dominated the northern Jiangsu. In terms of city types, the spatial pattern for industrial structure indicates that recession resource-based cities had higher carbon emission intensities than mature resource-based cities, followed by non-resource-based cities and regenerative resource-based cities. Generally, the industrial structure in the Xuzhou Metropolitan Area has transformed from being resource-intensive to capital-intensive, and has been trending toward technology-intensive as resource availability has been exploited to exhaustion and then been regenerated. Industrial structure has been the leading factor causing heterogeneity of carbon emission intensities between metropolitan cities. Therefore, the key to optimizing the industrial structure and layout of metropolitan areas is to promote industrial structure transformation and improve the system controlling collaborative industrial development between cities.展开更多
Hydrocarbon expulsion occurs only when pore fluid pressure due to hydrocarbon generation in source rock exceeds the force against migration in the adjacent carrier beds.Taking the Middle-Upper Ordovician carbonate sou...Hydrocarbon expulsion occurs only when pore fluid pressure due to hydrocarbon generation in source rock exceeds the force against migration in the adjacent carrier beds.Taking the Middle-Upper Ordovician carbonate source rock of Tarim Basin in China as an example,this paper proposes a method that identifies effective carbonate source rock based on the principles of mass balance.Data from the Well YW2 indicate that the Middle Ordovician Yijianfang Formation contains effective carbonate source rocks with low present-day TOC.Geological and geochemical analysis suggests that the hydrocarbons in the carbonate interval are likely self-generated and retained.Regular steranes from GC-MS analysis of oil extracts in this interval display similar features to those of the crude oil samples in Tabei area,indicating that the crude oil probably was migrated from the effective source rocks.By applying to other wells in the basin,the identified effective carbonate source rocks and non-source rock carbonates can be effectively identified and consistent with the actual exploration results,validating the method.Considering the contribution from the identified effective source rocks with low present-day TOC(TOC_(pd))is considered,the long-standing puzzle between the proved 3 P oil reserves and estimated resources in the basin can be reasonably explained.展开更多
A calculation model based on effective medium theory has been developed for predicting elastic properties of dry carbonates with complex pore structures by integrating the Kuster-Toksǒz model with a differential meth...A calculation model based on effective medium theory has been developed for predicting elastic properties of dry carbonates with complex pore structures by integrating the Kuster-Toksǒz model with a differential method.All types of pores are simultaneously introduced to the composite during the differential iteration process according to the ratio of their volume fractions.Based on this model,the effects of pore structures on predicted pore-pressure in carbonates were analyzed.Calculation results indicate that cracks with low pore aspect ratios lead to pore-pressure overestimation which results in lost circulation and reservoir damage.However,moldic pores and vugs with high pore aspect ratios lead to pore-pressure underestimation which results in well kick and even blowout.The pore-pressure deviation due to cracks and moldic pores increases with an increase in porosity.For carbonates with complex pore structures,adopting conventional pore-pressure prediction methods and casing program designs will expose the well drilling engineering to high uncertainties.Velocity prediction models considering the influence of pore structure need to be built to improve the reliability and accuracy of pore-pressure prediction in carbonates.展开更多
The hydraulic concrete durability under the alternation of freeze-thaw and carbonation has been systematically investigated in this work, where both the micro part and the microscopic characteristics of concrete inter...The hydraulic concrete durability under the alternation of freeze-thaw and carbonation has been systematically investigated in this work, where both the micro part and the microscopic characteristics of concrete interface were analyzed based on computed tomography（CT） test and scanning electron microscopy（SEM）. Average CT numbers of each section, declined at water-cement ratio of 0.35, increased at 0.45, and changed a little at 0.55. The specimen in the absence of fly ash exhibited less types of hydration products and the surface was observed to be a needle-like ettringite, with a relatively dense overall structure. However, with the increase of fly ash content, pores and micro-cracks of specimen structure increased. Hexagonal flake calcium hydroxide, present in the specimen after the first carbonation, was negligible in the test pieces of the first freezethaw where the main hydration products were ettringite and calcium silicate gel. Regular hexagonal plates of calcium hydroxide exhibited in the interior of the specimen in which charring first occurred but calcium hydroxide rarely existed in the interior of the specimen in which freeze-thaw first occurred.展开更多
The influences of carbon on phase formation, Curie temperature, and magnetic entropy change of the NaZn13-type LaFe11.7Si1.3 were investigated. Seven carbon-containing alloys, LaFe11.7Si1.3Cx with x = 0, 0.03, 0.06, 0...The influences of carbon on phase formation, Curie temperature, and magnetic entropy change of the NaZn13-type LaFe11.7Si1.3 were investigated. Seven carbon-containing alloys, LaFe11.7Si1.3Cx with x = 0, 0.03, 0.06, 0.10, 0.20, 0.30, and 0.50, respectively, were prepared for this investigation. Experimental results show that addition of a small amount of carbon in LaFe11.7Sil.3 is favorable for the formation of the NaZn13-type structure of LaFe11.7Si1.3Cx. The lattice constant increases with C addition and x increases in the alloy because of the introduction of C as interstitial atoms. The Curie temperature of LaFe11.7Si1.3Cx increases from 194 K to 225 K as x increases from 0 to 0.5. Large magnetic entropy changes were observed in these carbon-containing alloys LaFe11.7Si1.3Cx because of their first-order structural/magnetic transition. The maximum magnetic entropy change of 27.5 J.kg^-1K^-1 at 202 K for the 0-1.56 T magnetic field change was observed in the alloy with x = 0.06. The large magnetic-entropy changes corresponding to low magnetic field change, and the low cost of the material of LaFe11..7Si1.3Cx makes it a promising candidate to be used as magnetic refrigerants in the corresponding temperature range.展开更多
As part of the development work of the Chinese new regional climate model (RIEMS), the radiative process of black carbon (BC) aerosols has been introduced into the original radiative procedures of RIEMS, and the trans...As part of the development work of the Chinese new regional climate model (RIEMS), the radiative process of black carbon (BC) aerosols has been introduced into the original radiative procedures of RIEMS, and the transport model of BC aerosols has also been established and combined with the RIEMS model. Using the new model system, the distribution of black carbon aerosols and their radiative effect over the China region are investigated. The influences of BC aerosole on the atmospheric radiative transfer and on the air temperature, land surface temperature, and total rainfall are analyzed. It is found that BC aerosols induce a positive radiative forcing at the top of the atmosphere (TOA), which is dominated by shortwave radiative forcing. The maximum radiative forcing occurs in North China in July and in South China in April. At the same time, negative radiative forcing is observed on the surface. Based on the radiative forcing comparison between clear sky and cloudy sky, it is found that cloud can enforce the TOA positive radiative forcing and decrease the negative surface radiative forcing. The responses of the climate system in July to the radiative forcing due to BC aerosols are the decrease in the air temperature in the middle and lower reaches of the Changjiang River and Huaihe area and most areas of South China, and the weak increase or decrease in air temperature over North China. The total rainfall in the middle and lower reaches of the Changjiang River area is increased, but it decreased in North China in July.展开更多
Data show that carbon emissions are increasing due to human energy consumption associated with economic development. As a result, a great deal of attention has been focused on efforts to reduce this growth in carbon e...Data show that carbon emissions are increasing due to human energy consumption associated with economic development. As a result, a great deal of attention has been focused on efforts to reduce this growth in carbon emissions as well as to formulate policies to address and mitigate climate change. Although the majority of previous studies have explored the driving forces underlying Chinese carbon emissions, few have been carried out at the city-level because of the limited availability of relevant energy consumption statistics. Here, we utilize spatial autocorrelation, Markov-chain transitional matrices, a dynamic panel model, and system generalized distance estimation(Sys-GMM) to empirically evaluate the key determinants of carbon emissions at the city-level based on Chinese remote sensing data collected between 1992 and 2013. We also use these data to discuss observed spatial spillover effects taking into account spatiotemporal lag and a range of different geographical and economic weighting matrices. The results of this study suggest that regional discrepancies in city-level carbon emissions have decreased over time, which are consistent with a marked spatial spillover effect, and a ‘club' agglomeration of high-emissions. The evolution of these patterns also shows obvious path dependence, while the results of panel data analysis reveal the presence of a significant U-shaped relationship between carbon emissions and per capita GDP. Data also show that per capita carbon emissions have increased in concert with economic growth in most cities, and that a high-proportion of secondary industry and extensive investment growth have also exerted significant positive effects on city-level carbon emissions across China. In contrast, rapid population agglomeration, improvements in technology, increasing trade openness, and the accessibility and density of roads have all played a role in inhibiting carbon emissions. Thus, in order to reduce emissions, the Chinese government should legislate to inhibit the effects of factors that promote the release of carbon while at the same time acting to encourage those that mitigate this process. On the basis of the analysis presented in this study, we argue that optimizing industrial structures, streamlining extensive investment, increasing the level of technology, and improving road accessibility are all effective approaches to increase energy savings and reduce carbon emissions across China.展开更多
Biological carbon pumping(BCP)is a key process in which dissolved inorganic carbon in terrestrial aquatic ecosystems is utilized by aquatic autotrophs for photosynthesis and transformed into autochthonous organic matt...Biological carbon pumping(BCP)is a key process in which dissolved inorganic carbon in terrestrial aquatic ecosystems is utilized by aquatic autotrophs for photosynthesis and transformed into autochthonous organic matter(AOC).However,the mechanisms underlying BCP and the amount of generated AOC deposited effectively,are still poorly understood.Therefore,we conducted a systematic study combining modern hydrochemical monitoring and a sediment trap experiment in Fuxian Lake(Yunnan,SW China),the second-deepest plateau,oligotrophic freshwater lake in China.Temperature,pH,EC(electrical conductivity),DO(dissolved O2),[HCO3^-],[Ca^2+],SIc,partial CO2(pCO2)pressure,and carbon isotopic compositions of HCO3^-(δ^13CDIc)in water from Fuxian Lake all displayed distinct seasonal and vertical variations.This was especially apparent in an inverse correlation between pCO2 and DO,indicating that variations of hydrochemistry in the lake water were mainly controlled by the metabolism of the aquatic phototrophs.Furthermore,the lowest C/N ratios and highestδ^13Corg were recorded in the trap sediments.Analyses of the C/N ratio demonstrated that the proportions of AOC ranged from 30%to 100%of all OC,indicating that AOC was an important contributor to sedimentary organic matter(OC).It was calculated that the AOC flux in Fuxian Lake was 20.43 t C km^-2 in 2017.Therefore,AOC produced by carbonate weathering and aquatic photosynthesis could potentially be a significant carbon sink and may have an important contribution to solving the lack of carbon sinks in the global carbon cycle.展开更多
The catalytic effect of activated carbon on the bioleaching of low-grade primary copper sulfide ores using mixture of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans was investigated. The results show...The catalytic effect of activated carbon on the bioleaching of low-grade primary copper sulfide ores using mixture of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans was investigated. The results show that the addition of activated carbon can greatly accelerate the rate and efficiency of copper dissolution from low-grade primary copper sulfide ores. The solution with the concentration of 3.0 g/L activated carbon is most beneficial to the dissolution of copper. The resting time of the mixture of activated carbon and ores has an impact on the bioleaching of low-grade primary copper sulfide ores. The 2 d resting time is most favorable to the dissolution of copper. The enhanced dissolution rate and efficiency of copper can be attributed to the galvanic interaction between activated carbon and chalcopyrite. The addition of activated carbon obviously depresses the dissolution of iron and the bacterial oxidation of ferrous ions in solution. The lower redox potentials are more favorable to the copper dissolution than the higher potentials for low-grade primary copper sulfide ores in the presence of activated carbon.展开更多
The effect of C content (0.014-0.39 wt pct) on the paramagnetic-antiferromagnetic transition and γ→ε martensitic transformation of Fe-24Mn alloys has been investigated by the resistivity, dilation, tensile properti...The effect of C content (0.014-0.39 wt pct) on the paramagnetic-antiferromagnetic transition and γ→ε martensitic transformation of Fe-24Mn alloys has been investigated by the resistivity, dilation, tensile properties measurement and microstructure examination. The results have shown that C decreases T_N; increases the thermal expansion coefficients both above and below the T_N; increases the resistivity above the T_N and antiferromagnetic scattering resistivity below T_N. It strongly depresses the γ→ε martensitic transformation and reduces the M_s of Fe-24Mn alloys. Moreover, it increases the lattice parameter of austenite, enhances the tensile ductility, but almost does not affect the tensile strength. With increasing C content from 0.014 to 0.19 wt pct, the yield strength of Fe-24Mn alloy decreases obviously arising from the decreasing of preexisting ε martensite. but it increases from 0.19 to 0.39 wt pct C due to the solution hardening of C.展开更多
Simulating the coupling effect brought by freeze-thaw and carbonation environment, we experimentally investigated concrete durability, the variation characteristics of both concrete dynamic elastic modulus, and its ne...Simulating the coupling effect brought by freeze-thaw and carbonation environment, we experimentally investigated concrete durability, the variation characteristics of both concrete dynamic elastic modulus, and its neutralization depth. The influences imposed by carbonation on the freeze-thaw damage of concrete was studied as well and vise versa so as to shed light on the influencing mechanism together with the mutual interaction between them. The experimental results show that the damage caused by the coupling effect of freeze-thaw and carbonation on concrete is severer than any single effect of them two could bring. This provides certain theoretical references and paves down foundations for the further study in concrete durability related by the coupling environmental effect.展开更多
Based on the multi-regional input-output analysis, this paper improves the four traditional input-output formulas about exports resulting in multi-regional carbon emissions spatial effects which include direct effect,...Based on the multi-regional input-output analysis, this paper improves the four traditional input-output formulas about exports resulting in multi-regional carbon emissions spatial effects which include direct effect, indirect effect, spillover effect and feedback effect. And the latter two formulas are to measure the bidirectional influences of carbon emissions induced by regional exports between two regions. The results suggest that the direct effects of Chinese eight regions induced by national exports decreased from 1997 to 2010, and the indirect effects induced by national exports also decreased except the northern coastal region and the northwestern region in China. During this period, most of Chinese coastal regions had strong spillover effects induced by their own exports. The northern coastal region and the eastern coastal region had stronger feedback effects, while the southern coastal region had weaker feedback effects and Beijing-Tianjin region had the weakest feedback effect induced by their exports. All of the inland regions had strong feedback effects, especially for Northwest and Central China, induced by their exports. More attention should be paid to the inter-regional joint efforts in order to effectively achieve Chinese national carbon-reduction target.展开更多
In this paper, the RIEMS 2.0 model is used to simulate the distribution of sulfate, black carbon, and organic carbon aerosols over China （16.2°-44.1°N, 93.4°-132.4°E） in 1998. The climate effects...In this paper, the RIEMS 2.0 model is used to simulate the distribution of sulfate, black carbon, and organic carbon aerosols over China （16.2°-44.1°N, 93.4°-132.4°E） in 1998. The climate effects of these three anthropogenic aerosols are also simulated. The results are summarized as follows： （1） The regional average column burdens of sulfate, BC, OC, and SOC were 5.9, 0.24, 2.4, and 0.49 mg m-2, with maxima of 33.9, 1.48, 7.3, and 1.1 mg m-2, respectively. The column burden and surface concentration of secondary organic carbon accounted for about 20% and 7%, respectively, of the total organic carbon in eastern China. （2） The radiative forcings of sulfate, organic carbon, and black carbon at the top of the atmosphere were -1.24, -0.6, and 0.16 W m 2 respectively, with extremes of -5.25, -2.6, and 0.91 W m-2. （3） The surface air temperature changes caused by sulfate, organic carbon, and black carbon were -0.07, -0.04, and 0.01 K, respectively. The air temperature increase caused by black carbon at 850 hPa was higher than that at the surface. The net effect of the three kinds of anthropogenic aerosols together decreased the annual average temperature by -0.075 K; the maximum value was -0.3 K. （4） Black carbon can reduce the precipitation in arid and semi-arid areas of northern China and increase the precipitation in wet and semi-wet areas of southern China. The average precipitation increase caused by black carbon in China was 0.003 mm d^-1. The net effect of the three kinds of anthropogenic aerosols was to decrease the precipitation over China by 0.008 mmd ^-1.展开更多
A vertical carbon nanotube field-effect transistor(CNTFET) based on silicon(Si) substrate has been proposed and simulated using a semi-classical theory. A single-walled carbon nanotube(SWNT) and an n-type Si nanowire ...A vertical carbon nanotube field-effect transistor(CNTFET) based on silicon(Si) substrate has been proposed and simulated using a semi-classical theory. A single-walled carbon nanotube(SWNT) and an n-type Si nanowire in series construct the channel of the transistor. The CNTFET presents ambipolar characteristics at positive drain voltage(Vd) and n-type characteristics at negative Vd. The current is significantly influenced by the doping level of n-Si and the SWNT band gap. The n-branch current of the ambipolar characteristics increases with increasing doping level of the n-Si while the p-branch current decreases. The SWNT band gap has the same influence on the p-branch current at a positive Vd and n-type characteristics at negative Vd. The lower the SWNT band gap, the higher the current. However, it has no impact on the n-branch current in the ambipolar characteristics. Thick oxide is found to significantly degrade the current and the subthreshold slope of the CNTFETs.展开更多
Based on Chinese provincial panel data from 2003 to 2014,the spatial dependence between the environment regulation and carbon emissions is tested by spatial autocorrelation analysis. Besides,spatial lag model and spat...Based on Chinese provincial panel data from 2003 to 2014,the spatial dependence between the environment regulation and carbon emissions is tested by spatial autocorrelation analysis. Besides,spatial lag model and spatial error model are built to empirically test the marginal effect of environmental regulation on carbon emissions and its spatial effect. The result shows that the influence trajectory of environmental regulation on carbon emissions performances inverted ＂ U＂ type. It is ＂ green paradox effect＂ before the inflection point and ＂ reversed transmission reduction effect＂ after the inflection point. Moreover,the carbon emissions show significant spatial spillover effect. In order to achieve the desired effect of environmental regulation and promote carbon reduction,we should increase the environmental regulation intensity reasonably,select rational environmental regulation policy tools,and sufficiently consider the spatial spillover effect of carbon emissions.展开更多
Coupled effects of mechanical and electronic behavior in single walled carbon nanotubes are investigated by using quantum mechanics and quantum molecular dynamics.It is found that external applied electric fields can ...Coupled effects of mechanical and electronic behavior in single walled carbon nanotubes are investigated by using quantum mechanics and quantum molecular dynamics.It is found that external applied electric fields can cause charge polarization and significant geometric deformation in metallic and semi-metallic carbon nanotubes.The electric induced axial tension ratio can be up to 10% in the armchair tube and 8.5% in the zigzag tube.Pure external applied load has little effect on charge distribution,but indeed influences the energy gap.Tensile load leads to a narrower energy gap and compressive load increases the gap.When the CNT is tensioned under an external electric field,the effect of mechanical load on the electronic structures of the CNT becomes significant,and the applied electric field may reduce the critical mechanical tension load remarkably.Size effects are also discussed.展开更多
基金supported by the Natural Science Foundation of Zhejiang Province(No.ZCLQN25C0301)the National Key Research and Development Program of China(No.2016YFC0502700)the General Program of Education Department of Zhejiang(No.23056209-F).
文摘Forest carbon sinks are crucial for mitigating urban climate change.Their effectiveness depends on the balance between gross carbon losses and gains.However,quantitative and continuous monitoring of forest change/disturbance carbon fluxes is still insufficient.To address this gap,we integrated an improved spatial carbon bookkeeping(SBK)model with the continuous change detection and classification(CCDC)algorithm,long-term Landsat observations,and ground measurements to track carbon emissions,uptakes,and net changes from forest cover changes in the Yangtze River Delta(YRD)of China from 2000 to 2020.The SBK model was refined by incorporating heterogeneous carbon response functions.Our results reveal that carbon emissions(-3.88 Tg C·year^(-1))were four times greater than carbon uptakes(0.93 Tg C·year^(-1))from forest cover changes in the YRD during 2000-2020,despite a net forest cover gain of 10.95×10^(4) ha.These findings indicate that the carbon effect per hectare of forest cover loss is approximately 4.5 times that of forest cover gain.The asymmetric carbon effect suggests that forest cover change may act as a carbon source even with net-zero or net-positive forest cover change.Furthermore,carbon uptakes from forest gains in the YRD during 2000-2020 could only offset 0.28% of energy-related carbon emissions from 2000 to 2019.Urban and agricultural expansions accounted for 37% and 10% of carbon emissions,respectively,while the Grain for Green Project contributed to 45% of carbon uptakes.Our findings underscore the necessity of understanding the asymmetric carbon effects of forest cover loss and gain to accurately assess the capacity of forest carbon sinks.
文摘With the goal of achieving carbon peak and carbon neutrality,this paper studies the carbon effect of agricultural land remediation.In this paper,the carbon effect mechanism and calculation method of land consolidation,the proposed national carbon peaking and carbon neutrality goals,and the requirements put forward by agricultural land consolidation followed were analyzed.Then,the application research on the carbon effect accounting of agricultural land consolidation was conducted.Besides,the application process of carbon effect accounting of land consolidation with the goals of carbon peaking and carbon neutrality.Therefore,we hope this study will play an effective role to advance the carbon effect research in the regulation of agricultural land.
基金Under the auspices of National Natural Science Foundation of China(No.42171230)。
文摘Exploring carbon emission effects based on the evolution of residents’ dietary structure to achieve the carbon neutrality goal and mitigate climate change is an important task.This study took China as the research object(data excluding Hong Kong,Macao and Taiwan) and used the carbon emission coefficient method to quantitatively measure the food carbon emissions from 1987–2020,then analyzed the carbon emission effects under the evolution of dietary structure.The results showed that during the study period,the Chinese dietary structure gradually changed to a high-carbon consumption pattern.The dietary structure of urban residents developed to a balanced one,while that of rural residents developed to a high-quality one.During the study period,the per capita food carbon emissions and total food consumption of Chinese showed an increasing trend.The per capita food carbon emissions of residents in urban and rural showed an overall upward trend.The total food carbon emissions in urban increased significantly,while that in rural increased first and then decreased.The influence of beef and mutton on carbon emissions is the highest in dietary structure.Compared with the balanced dietary pattern,the food carbon emissions of Chinese residents had not yet reached the peak,but were evolving to a high-carbon consumption pattern.
基金supported by the National Natural Science Foundation of China(21473175)the National Instrumentation Program(2011YQ03012416)the National Basic Reserarch Program of China(973 Program,2015CB932301)
文摘The potential （E）-dependent vibrational behavior of a saturated CO adlayer on Au-core Pd-shell nanoparticle film electrodes was investigated over a wide potential range, in acidic, neutral, and basic solutions, using in situ surface-enhanced Raman spectroscopy （SERS）. Over the whole of the examined potential region （-1.5 to 0.55 V vs. NHE）, the peak frequencies of both the C-OM and the Pd-COM band （here, M denotes the multiply-bonded configuration） displayed three distinct linear regions： dvc oM/dE decreased from -185-207 （from -1.5 to -1.2 V） to -83-84 cm-1/V （-1.2 to -0.15 V）, and then to 43 cm-1/V （-0.2 to 0.55 V）; on the other hand, dvpd coM/dE changed from -10 to -8 cm I/V （from -1.5 to -1.2 V） to ^-31 to -30 cm-1/V （-1.2 to -0.15 V）, and then to -15 cm-1/V （-0.2 to 0.55 V）. The simultaneously recorded cyclic voltammograms revealed that at E 〈 -1.2 V, a hydro- gen evolution reaction （HER） occurred. With the help of periodic density functional theory calcula- tions using two different （2 × 2）-3CO slab models with Pd（111）, the unusually high dvc-oM/dE and the small dVPd-CoM/dE in the HER region were explained as being due to the conversion of COad from bridge to hollow sites, which was induced by the co-adsorbed hydrogen atoms formed from dissociated water at negative potentials.
基金Under the auspices of the National Natural Science Foundation of China(No.41371146,41671123)National Social Science Foundation of China(No.13BJY067)
文摘Employing decoupling index and industrial structure characteristic bias index methods, this study analyzed the spatial-temporal characteristics of industrial structure transformations and their resulting carbon emissions in the Xuzhou Metropolitan Area from 2000 to 2014, with a focus on their relationships and driving factors. Our research indicates that carbon emission intensity from industrial structures in the Xuzhou Metropolitan Area at first showed an increasing trend, which then decreased. Furthermore, the relationship between emissions and industrial economic growth has been trending toward absolute decoupling. From the perspective of the center-periphery, the Xuzhou Metropolitan Area formed a concentric pattern, where both progress towards low emissions and the level of technological advancement gradually diminished from the center to the periphery. In terms of variation across provinces, the ISCB index in the eastern Henan has decreased the slowest, followed by the southern Shandong and the northern Anhui, with the northern Jiangsu ranking last. During this period, resource-and labor-intensive industries were the primary growth industries in the northern Anhui and the eastern Henan, while labor-intensive industries dominated the southern Shandong and capital-intensive industries dominated the northern Jiangsu. In terms of city types, the spatial pattern for industrial structure indicates that recession resource-based cities had higher carbon emission intensities than mature resource-based cities, followed by non-resource-based cities and regenerative resource-based cities. Generally, the industrial structure in the Xuzhou Metropolitan Area has transformed from being resource-intensive to capital-intensive, and has been trending toward technology-intensive as resource availability has been exploited to exhaustion and then been regenerated. Industrial structure has been the leading factor causing heterogeneity of carbon emission intensities between metropolitan cities. Therefore, the key to optimizing the industrial structure and layout of metropolitan areas is to promote industrial structure transformation and improve the system controlling collaborative industrial development between cities.
基金financially supported by the Science Foundation of China University of Petroleum,Beijing(Grant No.2462020BJRC005)the Joint Funds of National Natural Science Foundation of China(Grant No.U19B6003-02)。
文摘Hydrocarbon expulsion occurs only when pore fluid pressure due to hydrocarbon generation in source rock exceeds the force against migration in the adjacent carrier beds.Taking the Middle-Upper Ordovician carbonate source rock of Tarim Basin in China as an example,this paper proposes a method that identifies effective carbonate source rock based on the principles of mass balance.Data from the Well YW2 indicate that the Middle Ordovician Yijianfang Formation contains effective carbonate source rocks with low present-day TOC.Geological and geochemical analysis suggests that the hydrocarbons in the carbonate interval are likely self-generated and retained.Regular steranes from GC-MS analysis of oil extracts in this interval display similar features to those of the crude oil samples in Tabei area,indicating that the crude oil probably was migrated from the effective source rocks.By applying to other wells in the basin,the identified effective carbonate source rocks and non-source rock carbonates can be effectively identified and consistent with the actual exploration results,validating the method.Considering the contribution from the identified effective source rocks with low present-day TOC(TOC_(pd))is considered,the long-standing puzzle between the proved 3 P oil reserves and estimated resources in the basin can be reasonably explained.
基金the financial support from the National Natural Science Foundation of China (No. 51274230)the Natural Science Foundation of Shandong Province (No. ZR2012EEL01)the Fundamental Research Funds for the Central Universities (No. 14CX02040A and No. 14CX06023A)
文摘A calculation model based on effective medium theory has been developed for predicting elastic properties of dry carbonates with complex pore structures by integrating the Kuster-Toksǒz model with a differential method.All types of pores are simultaneously introduced to the composite during the differential iteration process according to the ratio of their volume fractions.Based on this model,the effects of pore structures on predicted pore-pressure in carbonates were analyzed.Calculation results indicate that cracks with low pore aspect ratios lead to pore-pressure overestimation which results in lost circulation and reservoir damage.However,moldic pores and vugs with high pore aspect ratios lead to pore-pressure underestimation which results in well kick and even blowout.The pore-pressure deviation due to cracks and moldic pores increases with an increase in porosity.For carbonates with complex pore structures,adopting conventional pore-pressure prediction methods and casing program designs will expose the well drilling engineering to high uncertainties.Velocity prediction models considering the influence of pore structure need to be built to improve the reliability and accuracy of pore-pressure prediction in carbonates.
基金Funded by the National Natural Science Foundation of China(Nos.51279017,51539002 and 51139001)China Postdoctoral Science Foundation Funded Project(No.2015M582213)
文摘The hydraulic concrete durability under the alternation of freeze-thaw and carbonation has been systematically investigated in this work, where both the micro part and the microscopic characteristics of concrete interface were analyzed based on computed tomography（CT） test and scanning electron microscopy（SEM）. Average CT numbers of each section, declined at water-cement ratio of 0.35, increased at 0.45, and changed a little at 0.55. The specimen in the absence of fly ash exhibited less types of hydration products and the surface was observed to be a needle-like ettringite, with a relatively dense overall structure. However, with the increase of fly ash content, pores and micro-cracks of specimen structure increased. Hexagonal flake calcium hydroxide, present in the specimen after the first carbonation, was negligible in the test pieces of the first freezethaw where the main hydration products were ettringite and calcium silicate gel. Regular hexagonal plates of calcium hydroxide exhibited in the interior of the specimen in which charring first occurred but calcium hydroxide rarely existed in the interior of the specimen in which freeze-thaw first occurred.
基金The study was financially supported by the National Natural Science Foundation of China (Nos. 50371058 and 50471108)
文摘The influences of carbon on phase formation, Curie temperature, and magnetic entropy change of the NaZn13-type LaFe11.7Si1.3 were investigated. Seven carbon-containing alloys, LaFe11.7Si1.3Cx with x = 0, 0.03, 0.06, 0.10, 0.20, 0.30, and 0.50, respectively, were prepared for this investigation. Experimental results show that addition of a small amount of carbon in LaFe11.7Sil.3 is favorable for the formation of the NaZn13-type structure of LaFe11.7Si1.3Cx. The lattice constant increases with C addition and x increases in the alloy because of the introduction of C as interstitial atoms. The Curie temperature of LaFe11.7Si1.3Cx increases from 194 K to 225 K as x increases from 0 to 0.5. Large magnetic entropy changes were observed in these carbon-containing alloys LaFe11.7Si1.3Cx because of their first-order structural/magnetic transition. The maximum magnetic entropy change of 27.5 J.kg^-1K^-1 at 202 K for the 0-1.56 T magnetic field change was observed in the alloy with x = 0.06. The large magnetic-entropy changes corresponding to low magnetic field change, and the low cost of the material of LaFe11..7Si1.3Cx makes it a promising candidate to be used as magnetic refrigerants in the corresponding temperature range.
基金This research was sponsored by the National Key Program for Developing Basic Sciences of China(No.G1999043400)the National Natural Science Foundation of China(Grant Nos.40205016 and 40165001).
文摘As part of the development work of the Chinese new regional climate model (RIEMS), the radiative process of black carbon (BC) aerosols has been introduced into the original radiative procedures of RIEMS, and the transport model of BC aerosols has also been established and combined with the RIEMS model. Using the new model system, the distribution of black carbon aerosols and their radiative effect over the China region are investigated. The influences of BC aerosole on the atmospheric radiative transfer and on the air temperature, land surface temperature, and total rainfall are analyzed. It is found that BC aerosols induce a positive radiative forcing at the top of the atmosphere (TOA), which is dominated by shortwave radiative forcing. The maximum radiative forcing occurs in North China in July and in South China in April. At the same time, negative radiative forcing is observed on the surface. Based on the radiative forcing comparison between clear sky and cloudy sky, it is found that cloud can enforce the TOA positive radiative forcing and decrease the negative surface radiative forcing. The responses of the climate system in July to the radiative forcing due to BC aerosols are the decrease in the air temperature in the middle and lower reaches of the Changjiang River and Huaihe area and most areas of South China, and the weak increase or decrease in air temperature over North China. The total rainfall in the middle and lower reaches of the Changjiang River area is increased, but it decreased in North China in July.
基金National Natural Science Foundation of China,No.41601151Guangdong Natural Science Foundation,No.2016A030310149
文摘Data show that carbon emissions are increasing due to human energy consumption associated with economic development. As a result, a great deal of attention has been focused on efforts to reduce this growth in carbon emissions as well as to formulate policies to address and mitigate climate change. Although the majority of previous studies have explored the driving forces underlying Chinese carbon emissions, few have been carried out at the city-level because of the limited availability of relevant energy consumption statistics. Here, we utilize spatial autocorrelation, Markov-chain transitional matrices, a dynamic panel model, and system generalized distance estimation(Sys-GMM) to empirically evaluate the key determinants of carbon emissions at the city-level based on Chinese remote sensing data collected between 1992 and 2013. We also use these data to discuss observed spatial spillover effects taking into account spatiotemporal lag and a range of different geographical and economic weighting matrices. The results of this study suggest that regional discrepancies in city-level carbon emissions have decreased over time, which are consistent with a marked spatial spillover effect, and a ‘club' agglomeration of high-emissions. The evolution of these patterns also shows obvious path dependence, while the results of panel data analysis reveal the presence of a significant U-shaped relationship between carbon emissions and per capita GDP. Data also show that per capita carbon emissions have increased in concert with economic growth in most cities, and that a high-proportion of secondary industry and extensive investment growth have also exerted significant positive effects on city-level carbon emissions across China. In contrast, rapid population agglomeration, improvements in technology, increasing trade openness, and the accessibility and density of roads have all played a role in inhibiting carbon emissions. Thus, in order to reduce emissions, the Chinese government should legislate to inhibit the effects of factors that promote the release of carbon while at the same time acting to encourage those that mitigate this process. On the basis of the analysis presented in this study, we argue that optimizing industrial structures, streamlining extensive investment, increasing the level of technology, and improving road accessibility are all effective approaches to increase energy savings and reduce carbon emissions across China.
基金supported by the National Natural Science Foundation of China (Nos. 41430753, U1612441)
文摘Biological carbon pumping(BCP)is a key process in which dissolved inorganic carbon in terrestrial aquatic ecosystems is utilized by aquatic autotrophs for photosynthesis and transformed into autochthonous organic matter(AOC).However,the mechanisms underlying BCP and the amount of generated AOC deposited effectively,are still poorly understood.Therefore,we conducted a systematic study combining modern hydrochemical monitoring and a sediment trap experiment in Fuxian Lake(Yunnan,SW China),the second-deepest plateau,oligotrophic freshwater lake in China.Temperature,pH,EC(electrical conductivity),DO(dissolved O2),[HCO3^-],[Ca^2+],SIc,partial CO2(pCO2)pressure,and carbon isotopic compositions of HCO3^-(δ^13CDIc)in water from Fuxian Lake all displayed distinct seasonal and vertical variations.This was especially apparent in an inverse correlation between pCO2 and DO,indicating that variations of hydrochemistry in the lake water were mainly controlled by the metabolism of the aquatic phototrophs.Furthermore,the lowest C/N ratios and highestδ^13Corg were recorded in the trap sediments.Analyses of the C/N ratio demonstrated that the proportions of AOC ranged from 30%to 100%of all OC,indicating that AOC was an important contributor to sedimentary organic matter(OC).It was calculated that the AOC flux in Fuxian Lake was 20.43 t C km^-2 in 2017.Therefore,AOC produced by carbonate weathering and aquatic photosynthesis could potentially be a significant carbon sink and may have an important contribution to solving the lack of carbon sinks in the global carbon cycle.
文摘The catalytic effect of activated carbon on the bioleaching of low-grade primary copper sulfide ores using mixture of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans was investigated. The results show that the addition of activated carbon can greatly accelerate the rate and efficiency of copper dissolution from low-grade primary copper sulfide ores. The solution with the concentration of 3.0 g/L activated carbon is most beneficial to the dissolution of copper. The resting time of the mixture of activated carbon and ores has an impact on the bioleaching of low-grade primary copper sulfide ores. The 2 d resting time is most favorable to the dissolution of copper. The enhanced dissolution rate and efficiency of copper can be attributed to the galvanic interaction between activated carbon and chalcopyrite. The addition of activated carbon obviously depresses the dissolution of iron and the bacterial oxidation of ferrous ions in solution. The lower redox potentials are more favorable to the copper dissolution than the higher potentials for low-grade primary copper sulfide ores in the presence of activated carbon.
文摘The effect of C content (0.014-0.39 wt pct) on the paramagnetic-antiferromagnetic transition and γ→ε martensitic transformation of Fe-24Mn alloys has been investigated by the resistivity, dilation, tensile properties measurement and microstructure examination. The results have shown that C decreases T_N; increases the thermal expansion coefficients both above and below the T_N; increases the resistivity above the T_N and antiferromagnetic scattering resistivity below T_N. It strongly depresses the γ→ε martensitic transformation and reduces the M_s of Fe-24Mn alloys. Moreover, it increases the lattice parameter of austenite, enhances the tensile ductility, but almost does not affect the tensile strength. With increasing C content from 0.014 to 0.19 wt pct, the yield strength of Fe-24Mn alloy decreases obviously arising from the decreasing of preexisting ε martensite. but it increases from 0.19 to 0.39 wt pct C due to the solution hardening of C.
基金Funded by the National Natural Science Foundation of China (No.50538060)
文摘Simulating the coupling effect brought by freeze-thaw and carbonation environment, we experimentally investigated concrete durability, the variation characteristics of both concrete dynamic elastic modulus, and its neutralization depth. The influences imposed by carbonation on the freeze-thaw damage of concrete was studied as well and vise versa so as to shed light on the influencing mechanism together with the mutual interaction between them. The experimental results show that the damage caused by the coupling effect of freeze-thaw and carbonation on concrete is severer than any single effect of them two could bring. This provides certain theoretical references and paves down foundations for the further study in concrete durability related by the coupling environmental effect.
基金National Natural Science Foundation of China, No.41201129, No.41125005
文摘Based on the multi-regional input-output analysis, this paper improves the four traditional input-output formulas about exports resulting in multi-regional carbon emissions spatial effects which include direct effect, indirect effect, spillover effect and feedback effect. And the latter two formulas are to measure the bidirectional influences of carbon emissions induced by regional exports between two regions. The results suggest that the direct effects of Chinese eight regions induced by national exports decreased from 1997 to 2010, and the indirect effects induced by national exports also decreased except the northern coastal region and the northwestern region in China. During this period, most of Chinese coastal regions had strong spillover effects induced by their own exports. The northern coastal region and the eastern coastal region had stronger feedback effects, while the southern coastal region had weaker feedback effects and Beijing-Tianjin region had the weakest feedback effect induced by their exports. All of the inland regions had strong feedback effects, especially for Northwest and Central China, induced by their exports. More attention should be paid to the inter-regional joint efforts in order to effectively achieve Chinese national carbon-reduction target.
基金supported by the National Program on Key Basic Research Project of China (973) under Grant Nos.2006CB400506 and 2010CB428501the National Natural Science Foundation of China (Grant No.40775014)
文摘In this paper, the RIEMS 2.0 model is used to simulate the distribution of sulfate, black carbon, and organic carbon aerosols over China （16.2°-44.1°N, 93.4°-132.4°E） in 1998. The climate effects of these three anthropogenic aerosols are also simulated. The results are summarized as follows： （1） The regional average column burdens of sulfate, BC, OC, and SOC were 5.9, 0.24, 2.4, and 0.49 mg m-2, with maxima of 33.9, 1.48, 7.3, and 1.1 mg m-2, respectively. The column burden and surface concentration of secondary organic carbon accounted for about 20% and 7%, respectively, of the total organic carbon in eastern China. （2） The radiative forcings of sulfate, organic carbon, and black carbon at the top of the atmosphere were -1.24, -0.6, and 0.16 W m 2 respectively, with extremes of -5.25, -2.6, and 0.91 W m-2. （3） The surface air temperature changes caused by sulfate, organic carbon, and black carbon were -0.07, -0.04, and 0.01 K, respectively. The air temperature increase caused by black carbon at 850 hPa was higher than that at the surface. The net effect of the three kinds of anthropogenic aerosols together decreased the annual average temperature by -0.075 K; the maximum value was -0.3 K. （4） Black carbon can reduce the precipitation in arid and semi-arid areas of northern China and increase the precipitation in wet and semi-wet areas of southern China. The average precipitation increase caused by black carbon in China was 0.003 mm d^-1. The net effect of the three kinds of anthropogenic aerosols was to decrease the precipitation over China by 0.008 mmd ^-1.
基金support by National High Technology Research and Development Program of China (No. 2011AA050504)the analysis supports from Instrumental Analysis Center of SJTU
文摘A vertical carbon nanotube field-effect transistor(CNTFET) based on silicon(Si) substrate has been proposed and simulated using a semi-classical theory. A single-walled carbon nanotube(SWNT) and an n-type Si nanowire in series construct the channel of the transistor. The CNTFET presents ambipolar characteristics at positive drain voltage(Vd) and n-type characteristics at negative Vd. The current is significantly influenced by the doping level of n-Si and the SWNT band gap. The n-branch current of the ambipolar characteristics increases with increasing doping level of the n-Si while the p-branch current decreases. The SWNT band gap has the same influence on the p-branch current at a positive Vd and n-type characteristics at negative Vd. The lower the SWNT band gap, the higher the current. However, it has no impact on the n-branch current in the ambipolar characteristics. Thick oxide is found to significantly degrade the current and the subthreshold slope of the CNTFETs.
基金Supported by Social Science Fund Project of Hunan Province(16YBA155)
文摘Based on Chinese provincial panel data from 2003 to 2014,the spatial dependence between the environment regulation and carbon emissions is tested by spatial autocorrelation analysis. Besides,spatial lag model and spatial error model are built to empirically test the marginal effect of environmental regulation on carbon emissions and its spatial effect. The result shows that the influence trajectory of environmental regulation on carbon emissions performances inverted ＂ U＂ type. It is ＂ green paradox effect＂ before the inflection point and ＂ reversed transmission reduction effect＂ after the inflection point. Moreover,the carbon emissions show significant spatial spillover effect. In order to achieve the desired effect of environmental regulation and promote carbon reduction,we should increase the environmental regulation intensity reasonably,select rational environmental regulation policy tools,and sufficiently consider the spatial spillover effect of carbon emissions.
基金The project supported by the National Natural Science Foundation of China (10372044)the Cheung Kong Scholars Programme
文摘Coupled effects of mechanical and electronic behavior in single walled carbon nanotubes are investigated by using quantum mechanics and quantum molecular dynamics.It is found that external applied electric fields can cause charge polarization and significant geometric deformation in metallic and semi-metallic carbon nanotubes.The electric induced axial tension ratio can be up to 10% in the armchair tube and 8.5% in the zigzag tube.Pure external applied load has little effect on charge distribution,but indeed influences the energy gap.Tensile load leads to a narrower energy gap and compressive load increases the gap.When the CNT is tensioned under an external electric field,the effect of mechanical load on the electronic structures of the CNT becomes significant,and the applied electric field may reduce the critical mechanical tension load remarkably.Size effects are also discussed.
