The determination of the local cooling rate has a great significance in optimizing the parameters of electroslag remelting(ESR)and improving the quality of the ingots.An innovative method was proposed for calibrating ...The determination of the local cooling rate has a great significance in optimizing the parameters of electroslag remelting(ESR)and improving the quality of the ingots.An innovative method was proposed for calibrating the local cooling rate of M42 high-speed steel(HSS)in the ESR process.After resolidification at different cooling rates under high-temperature laser confocal microscopy,the carbide network spacing of the specimen was observed using a scanning electron microscope.A functional relationship between the cooling rate and average carbide network spacing was established.The average local cooling rate of the solidification process of the M42 HSS ingot was calibrated.The results show that the higher the cool-ing rate,the smaller the network spacing of the carbides.For the steel ingot with a diameter of 360 mm,the average local cooling rate was 0.562℃/s at the surface,0.057℃/s at the position of 0.25D(where D is the diameter of the ingot),and 0.046℃/s at the center of the ingot.展开更多
A calibrating device for the Rogowski coil is developed, which can be used to calibrate the Rogowski coil having a partial response time within tens of nanoseconds. Its key component is a step current generator, which...A calibrating device for the Rogowski coil is developed, which can be used to calibrate the Rogowski coil having a partial response time within tens of nanoseconds. Its key component is a step current generator, which can generate the output with a rise time of less than 2 ns and a duration of larger than 300 ns. The step current generator is composed by a pulse forming line （PFL） and a pulse transmission line （PTL）. A TEM （transverse electromagnetic mode） coaxial measurement unit is used as PTL, and the coil to be calibrated and the referenced standard Rogowski coil can be fixed in the unit. The effect of the dimensions of the TEM unit is discussed theoretically as well as experimentally.展开更多
A novel and efficient method for decomposing a signal into a set of intrinsic mode functions （IMFs） and a trend is proposed. Unlike the original empirical mode decomposition （EMD）, which uses spline fits to extrac...A novel and efficient method for decomposing a signal into a set of intrinsic mode functions （IMFs） and a trend is proposed. Unlike the original empirical mode decomposition （EMD）, which uses spline fits to extract variations from the signal by separating the local mean from the fluctuations in the decomposing process, this new method being proposed takes advantage of the theory of variable finite impulse response （FIR） filtering where filter coefficients and breakpoint frequencies can be adjusted to track any peak-to-peak time scale changes. The IMFs are results of a multiple variable frequency response FIR filtering when signals pass through the filters. Numerical examples validate that in contrast with the original EMD, the proposed method can fine-tune the frequency resolution and suppress the aliasing effectively.展开更多
The measurement of the confocal volume of a confocal three-dimensional micro-x-ray fluorescence(3D-XRF)setup is a key step in the field of confocal 3D-XRF analysis.With the development of x-ray facilities and optical ...The measurement of the confocal volume of a confocal three-dimensional micro-x-ray fluorescence(3D-XRF)setup is a key step in the field of confocal 3D-XRF analysis.With the development of x-ray facilities and optical devices,3D-XRF analysis with a micro confocal volume will create a great potential for 2D and 3D microstructural analysis and accurate quantitative analysis.However,the classic measurement method of scanning metal foils of a certain thickness leads to inaccuracy.A method for calibrating the confocal volume is proposed in this paper.The new method is based on the basic content of the textbook,and the theoretical results and the feasibility are given in detail for the 3D-XRF mono-chromatic x-ray condition and the poly-chromatic x-ray condition.We obtain a set of experimental confirmation using the poly-chromatic x-ray tube in the laboratory.It is proved that the sensitivity factor of the 3D-XRF can be directly and accurately obtained in a real calibration process.展开更多
Doped elements in alloys significantly impact their performance.Conventional methods usually sputter the surface material of the sample,or their performance is limited to the surface of alloys owing to their poor pene...Doped elements in alloys significantly impact their performance.Conventional methods usually sputter the surface material of the sample,or their performance is limited to the surface of alloys owing to their poor penetration ability.The X-ray K-edge subtraction(KES)method exhibits great potential for the nondestructive in situ detection of element contents in alloys.However,the signal of doped elements usually deteriorates because of the strong absorption of the principal component and scattering of crystal grains.This in turn prevents the extensive application of X-ray KES imaging to alloys.In this study,methods were developed to calibrate the linearity between the grayscale of the KES image and element content.The methods were aimed at the sensitive analysis of elements in alloys.Furthermore,experiments with phantoms and alloys demonstrated that,after elaborate calibration,X-ray KES imaging is capable of nondestructive and sensitive analysis of doped elements in alloys.展开更多
Bridges are one of the most vulnerable components of a highway transportation network system subjected to earthquake ground motions. Prediction of resilience and sustainability of bridge performance in a probabilistic...Bridges are one of the most vulnerable components of a highway transportation network system subjected to earthquake ground motions. Prediction of resilience and sustainability of bridge performance in a probabilistic manner provides valuable information for pre-event system upgrading and post-event functional recovery of the network. The current study integrates bridge seismic damageability information obtained through empirical, analytical and experimental procedures and quantifies threshold limits of bridge damage states consistent with the physical damage description given in HAZUS. Experimental data from a large-scale shaking table test are utilized for this purpose. This experiment was conducted at the University of Nevada, Reno, where a research team from the University of California, Irvine, participated. Observed experimental damage data are processed to identify and quantify bridge damage states in terms of rotational ductility at bridge column ends. In parallel, a mechanistic model for fragility curves is developed in such a way that the model can be calibrated against empirical fragility curves that have been constructed from damage data obtained during the 1994 Northridge earthquake. This calibration quantifies threshold values of bridge damage states and makes the analytical study consistent with damage data observed in past earthquakes. The mechanistic model is transportable and applicable to most types and sizes of bridges. Finally, calibrated damage state definitions are compared with that obtained using experimental findings. Comparison shows excellent consistency among results from analytical, empirical and experimental observations.展开更多
In this article, the extension to three dimensions (3D) of the blending technique that has been widely used in two dimensions (2D) to calibrate ocean chlorophyll is presented. The results thus obtained revealed a very...In this article, the extension to three dimensions (3D) of the blending technique that has been widely used in two dimensions (2D) to calibrate ocean chlorophyll is presented. The results thus obtained revealed a very high degree of efficiency when predicting observed values of ocean chlorophyll. The mean squared difference between the predicted and observed values of ocean chlorophyll when 3D technique was used fell far below the tolerance level which was set to the difference between satellite and observed in-situ values. The resulting blended field did not only provide better predictions of the in situ observations in areas where bottle samples cannot be obtained but also provided a smooth variation of the distribution of ocean chlorophyll throughout the year. An added advantage is its computational efficiency since data that would have been treated at least four times would be treated only once. With the advent of these results, it is believed that the modelling of the ocean life cycle will become more realistic.展开更多
We introduce a corrected sinusoidal-wave drag force method （SDFM） into optical tweezers to calibrate the trapping stiffness of the optical trap and conversion factor （CF） of photodetectors. First, the theoretical ...We introduce a corrected sinusoidal-wave drag force method （SDFM） into optical tweezers to calibrate the trapping stiffness of the optical trap and conversion factor （CF） of photodetectors. First, the theoretical analysis and experimental result demonstrate that the correction of SDFM is necessary, especially the error of no correction is up to 11.25% for a bead of 5μm in diameter. Second, the simulation results demonstrate that the SDFM has a better performance in the calibration of optical tweezers than the triangular-wave drag force method （TDFM） and power spectrum density method （PSDM） at the same signal-to-noise ratio or trapping stiffness. Third, in experiments, the experimental standard deviations of calibration of trapping stiffness and CF with the SDFM are about less than 50% of TDFM and PSDM especially at low laser power. Finally, the experiments of stretching DNA verify that the in situ calibration with the SDFM improves the measurement stability and accuracy.展开更多
The multi-objective genetic algorithm(MOGA) is proposed to calibrate the non-linear camera model of a space manipulator to improve its locational accuracy. This algorithm can optimize the camera model by dynamic balan...The multi-objective genetic algorithm(MOGA) is proposed to calibrate the non-linear camera model of a space manipulator to improve its locational accuracy. This algorithm can optimize the camera model by dynamic balancing its model weight and multi-parametric distributions to the required accuracy. A novel measuring instrument of space manipulator is designed to orbital simulative motion and locational accuracy test. The camera system of space manipulator, calibrated by MOGA algorithm, is used to locational accuracy test in this measuring instrument. The experimental result shows that the absolute errors are [0.07, 1.75] mm for MOGA calibrating model, [2.88, 5.95] mm for MN method, and [1.19, 4.83] mm for LM method. Besides, the composite errors both of LM method and MN method are approximately seven times higher that of MOGA calibrating model. It is suggested that the MOGA calibrating model is superior both to LM method and MN method.展开更多
Sensor location uncertainty of array degrades severely the performance of eigenstruc-ture based direction finding system.A new calibration method of sensor location is presentedwith three far field sources whose direc...Sensor location uncertainty of array degrades severely the performance of eigenstruc-ture based direction finding system.A new calibration method of sensor location is presentedwith three far field sources whose directions are not known accurately.A signal subspace basediteration algorithm for sensor location calibration is developed and its convergence to the globaloptimal point has been shown.The guide line for selecting directions of calibrating sources isgiven.Simulation results illustrate that the new method is successful and practicable.展开更多
The conductance catheter technique allows real- time measurements of ventricular volume based on changes in the electrical conductance of blood within the ventricular cavity. Conductance volume measurements are correc...The conductance catheter technique allows real- time measurements of ventricular volume based on changes in the electrical conductance of blood within the ventricular cavity. Conductance volume measurements are corrected with a calibration coefficient, α, in order to improve accuracy. However, conductance volume measurements are also affected by parallel conductance, which may confound cali-bration coefficient estimation. This study was un-dertaken to examine the variation in α using a physical model of the left ventricle without parallel conductance. Calibration coefficients were calculated as the conductance-volume quotient (αV(t)) or the stroke conductance-stroke volume quotient (αSV). Both calibration coefficients varied as a non-linear function of the ventricular volume. Conductance volume measurements calibrated with αV(t) estimated ventricular volume to within 2.0 ±6.9%. By contrast, calibration with αSV substantially over-estimated the ventricular volume in a volume-dependent manner, increasing from 26 ±20% at 100ml to 106 ±36% at 500ml. The accuracy of conductance volume measurements is affected by the choice of calibration coefficient. Using a fixed or constant calibration coeffi-cient will result in volume measurement errors. The conductance-stroke volume quotient is associated with particularly significant and volume-dependent measurement errors. For this reason, conductance volume measurements should ideally be calibrated with an alternative measurement of ventricular vol-ume.展开更多
It is well known that the accuracy of camera calibration is constrained by the size of the reference plate,it is difficult to fabricate large reference plates with high precision.Therefore,it is non-trivial to calibra...It is well known that the accuracy of camera calibration is constrained by the size of the reference plate,it is difficult to fabricate large reference plates with high precision.Therefore,it is non-trivial to calibrate a camera with large field of view(FOV).In this paper,a method is proposed to construct a virtual large reference plate with high precision.Firstly,a high precision datum plane is constructed with a laser interferometer and one-dimensional air guideway,and then the reference plate is positioned at different locations and orientations in the FOV of the camera.The feature points of reference plate are projected to the datum plane to obtain a virtual large reference plate with high-precision.The camera is moved to several positions to get different virtual reference plates,and the camera is calibrated with the virtual reference plates.The experimental results show that the mean re-projection error of the camera calibrated with the proposed method is 0.062 pixels.The length of a scale bar with standard length of 959.778mm was measured with a vision system composed of two calibrated cameras,and the length measurement error is 0.389mm.展开更多
Monitoring multiplexed biochemical markers is beneficial for the comprehensive evaluation of diabetes-associated complications.Techniques for multiplexed analyses in interstitial fluids have often been restricted by t...Monitoring multiplexed biochemical markers is beneficial for the comprehensive evaluation of diabetes-associated complications.Techniques for multiplexed analyses in interstitial fluids have often been restricted by the difficulties of electrode materials in accurately detecting chemicals in complex subcutaneous spaces.In particular,the signal stability of enzyme-based sensing electrodes often inevitably decreases due to enzyme degradation or interference in vivo.In this study,we developed a self-calibrating multiplexed microneedle(MN)electrode array(SC-MMNEA)capable of continuous,real-time monitoring of multiple types of bioanalytes(glucose,cholesterol,uric acid,lactate,reactive oxygen species[ROSs],Na+,K+,Ca2+,and pH)in the subcutaneous space.Each type of analyte was detected by a discrete MN electrode assembled in an integrated array with single-MN resolution.Moreover,this device utilized an MN-delivery-mediated self-calibration technique to address the inherent problem of decreased accuracy of implantable electrodes caused by long-term tissue variation and enzyme degradation,and this technique might increase the reliability of the MN sensors.Our results indicated that SC-MMNEA could provide real-time monitoring of multiplexed analyte concentrations in a rat model with good accuracy,especially after self-calibration.SC-MMNEA has the advantages of in situ and minimally invasive monitoring of physiological states and the potential to promote wearable devices for long-term monitoring of chemical species in vivo.展开更多
Flexible electrochemical biosensors enable the in-situ monitoring and quantification of human biochemical constituents in molecular scale,spearheading and thriving the field toward precision medicine.However,specific ...Flexible electrochemical biosensors enable the in-situ monitoring and quantification of human biochemical constituents in molecular scale,spearheading and thriving the field toward precision medicine.However,specific biorecognition elements for multiplexed biomarkers detection,temperature stability and versatility need to be improved for higher adaption.Here,we propose a bioactive sensor patch comprising a non-enzyme Co_(3)O_(4)/carbon fiber-based biorecognition element and a temperature calibration unit.The optimized serpentine configuration renders the sensor intimate and seamless attachment with skin,operating robustly even subjected to 40%tensile strain.The fiber-based sensor could selectively monitor dopa-mine and lactic acid contents based on cyclic voltammetry and amperometry,respectively.The bioanalytical results at room temperature indicate that the electrochemical biosensor has a wide detection range(0.001–1.100 mM for dopamine and 2–35 mM for lactic acid),excellent selectivity and reproducibility(maximum error 3.2%for dopamine and 5.6%for lactic acid).In addition,temperature calibration contour maps of these two biomarkers are established in an ambient temperature range from 25 to 45℃.The continuously collected data could be aggregated and wirelessly transmitted to portable devices using an electrochemical signal transducer and an acquisition module,promising personalized and preventative health care in various scenarios.展开更多
This study constructed a numerical model using the discrete element software EDEM to address the current lack of calibrated contact parameters for peanut seedling membranes and the absence of precise simulation model ...This study constructed a numerical model using the discrete element software EDEM to address the current lack of calibrated contact parameters for peanut seedling membranes and the absence of precise simulation model parameters for mechanized separation. The Hysteretic Spring Contact Model (HSCM) was employed to calibrate the contact parameters of peanut seedling membranes. The angle of repose of peanut seedling membranes was determined through image processing combined with the least squares method. Through central composite design (CCD), a second-order response model linking the contact parameters to the angle of repose was established. Optimization was achieved by using the angle of repose obtained from physical tests as the objective. Secondary simulation tests were conducted with the calibrated parameters, revealing a relative error of 1.37% between the simulated and physical angles of repose. This confirmed the effectiveness of the parameters in calibrating peanut seedling membrane characteristics. The findings offer theoretical and empirical support for discrete element simulations of peanut seedling membrane separation and peanut straw pulverization processes.展开更多
High-precision magnetic field measurements are crucial for understanding Earth’s internal structure,space environment,and dynamic geomagnetic variations.Data from the Fluxgate Magnetometer (FGM) on the Macao Science ...High-precision magnetic field measurements are crucial for understanding Earth’s internal structure,space environment,and dynamic geomagnetic variations.Data from the Fluxgate Magnetometer (FGM) on the Macao Science Satellite-1A (MSS-1A),added to data from other space-based magnetometers,should increase significantly the ability of scientists to observe changes in Earth’s magnetic field over time and space.Additionally,the MSS-1A’s FGM is intended to help identify magnetic disturbances affecting the spacecraft itself.This report focuses on the in-flight calibration of the MSS-1 FGM.A scalar calibration,independent of geomagnetic field models,was performed to correct offsets,sensitivities,and misalignment angles of the FGM.Using seven months of data,we find that the in-flight calibration parameters show good stability.We determined Euler angles describing the rotational relationship between the FGM and the Advanced Stellar Compass (ASC) coordinate system using two approaches:calibration with the CHAOS-7 geomagnetic field model,and simultaneous estimation of Euler angles and Gaussian spherical harmonic coefficients through self-consistent modeling.The accuracy of Euler angles describing the rotation was better than 18 arcsec.The calibrated FGM data exhibit good agreement with the calibrated data of the Vector Field Magnetometer (VFM),which is the primary vector magnetometer of the satellite.These calibration efforts have significantly improved the accuracy of the FGM measurements,which are now providing reliable data for geomagnetic field studies that promise to advance our understanding of the Earth’s magnetic environment.展开更多
1.A.Mertha,“‘Stressing Out’:Cadre Calibration and Affective Proximity to the CCP in Reform-Era China”,The China Quarterly,Vol.229,2017,pp.64-85.2.B.L.McCormick,“Book Review of‘The Chinese Communist Party's C...1.A.Mertha,“‘Stressing Out’:Cadre Calibration and Affective Proximity to the CCP in Reform-Era China”,The China Quarterly,Vol.229,2017,pp.64-85.2.B.L.McCormick,“Book Review of‘The Chinese Communist Party's Capacity to Rule:Ideology,Legitimacy and Party Cohesion’”,The China Journal,Vol.77,2017,pp.161-163.展开更多
Accurate thrust assessment is crucial for characterizing the performance of micro-thrusters.This paper presents a comprehensive evaluation of the thrust generated by a needle-type indium field emission electric propul...Accurate thrust assessment is crucial for characterizing the performance of micro-thrusters.This paper presents a comprehensive evaluation of the thrust generated by a needle-type indium field emission electric propulsion(In-FEEP)micro-thruster using three methods based on a pendulum:direct thrust measurement,indirect plume momentum transfer and beam current diagnostics.The experimental setup utilized capacitive displacement sensors for force detection and a voice coil motor as a feedback actuator,achieving a resolution better than 0.1μN.Key performance factors such as ionization and plume divergence of ejected charged particles were also examined.The study reveals that the high applied voltage induces significant electrostatic interference,becoming the dominant source of error in direct thrust measurements.Beam current diagnostics and indirect plume momentum measurements were conducted simultaneously,showing strong agreement within a deviation of less than 0.2N across the operational thrust range.The results from all three methods are consistent within the error margins,verifying the reliability of the indirect measurement approach and the theoretical thrust model based on the electrical parameters of In-FEEP.展开更多
To enhance direction of arrival(DOA)estimation accuracy,this paper proposes a low-cost method for calibrating farfield steering vectors of large aperture millimeter wave radar(mmWR).To this end,we first derive the ste...To enhance direction of arrival(DOA)estimation accuracy,this paper proposes a low-cost method for calibrating farfield steering vectors of large aperture millimeter wave radar(mmWR).To this end,we first derive the steering vectors with amplitude and phase errors,assuming that mmWR works in the time-sharing mode.Then,approximate relationship between the near-field calibration steering vector and the far-field calibration steering vector is analyzed,which is used to accomplish the mapping between the two of them.Finally,simulation results verify that the proposed method can effectively improve the angle measurement accuracy of mmWR with existing amplitude and phase errors.展开更多
A recent single-center retrospective study proposed novel combinations of hematological parameters and scoring systems for predicting severe acute pancre-atitis.While these combinations showed promising predictive per...A recent single-center retrospective study proposed novel combinations of hematological parameters and scoring systems for predicting severe acute pancre-atitis.While these combinations showed promising predictive performance,several limitations warrant consideration,including the lack of calibration,the absence of key inflammatory markers such as procalcitonin,and practical challenges in integrating these models into routine clinical workflows.To improve predictive accuracy and clinical applicability,prospective validation and the inclusion of additional variables are recommended.展开更多
基金the National Natural Science Foundation of China(Nos.51974153,U1960203,and 51974156)the Joint Fund of State Key Laboratory of Marine Engineering and University of Science and Technology Liaoning(SKLMEA-USTL-201901,SKLMEA-USTL-201707)China Scholarship Council(201908210457).
文摘The determination of the local cooling rate has a great significance in optimizing the parameters of electroslag remelting(ESR)and improving the quality of the ingots.An innovative method was proposed for calibrating the local cooling rate of M42 high-speed steel(HSS)in the ESR process.After resolidification at different cooling rates under high-temperature laser confocal microscopy,the carbide network spacing of the specimen was observed using a scanning electron microscope.A functional relationship between the cooling rate and average carbide network spacing was established.The average local cooling rate of the solidification process of the M42 HSS ingot was calibrated.The results show that the higher the cool-ing rate,the smaller the network spacing of the carbides.For the steel ingot with a diameter of 360 mm,the average local cooling rate was 0.562℃/s at the surface,0.057℃/s at the position of 0.25D(where D is the diameter of the ingot),and 0.046℃/s at the center of the ingot.
文摘A calibrating device for the Rogowski coil is developed, which can be used to calibrate the Rogowski coil having a partial response time within tens of nanoseconds. Its key component is a step current generator, which can generate the output with a rise time of less than 2 ns and a duration of larger than 300 ns. The step current generator is composed by a pulse forming line （PFL） and a pulse transmission line （PTL）. A TEM （transverse electromagnetic mode） coaxial measurement unit is used as PTL, and the coil to be calibrated and the referenced standard Rogowski coil can be fixed in the unit. The effect of the dimensions of the TEM unit is discussed theoretically as well as experimentally.
基金supported by the National Natural Science Foundation of China (60472021).
文摘A novel and efficient method for decomposing a signal into a set of intrinsic mode functions （IMFs） and a trend is proposed. Unlike the original empirical mode decomposition （EMD）, which uses spline fits to extract variations from the signal by separating the local mean from the fluctuations in the decomposing process, this new method being proposed takes advantage of the theory of variable finite impulse response （FIR） filtering where filter coefficients and breakpoint frequencies can be adjusted to track any peak-to-peak time scale changes. The IMFs are results of a multiple variable frequency response FIR filtering when signals pass through the filters. Numerical examples validate that in contrast with the original EMD, the proposed method can fine-tune the frequency resolution and suppress the aliasing effectively.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11675019 and 11875087).
文摘The measurement of the confocal volume of a confocal three-dimensional micro-x-ray fluorescence(3D-XRF)setup is a key step in the field of confocal 3D-XRF analysis.With the development of x-ray facilities and optical devices,3D-XRF analysis with a micro confocal volume will create a great potential for 2D and 3D microstructural analysis and accurate quantitative analysis.However,the classic measurement method of scanning metal foils of a certain thickness leads to inaccuracy.A method for calibrating the confocal volume is proposed in this paper.The new method is based on the basic content of the textbook,and the theoretical results and the feasibility are given in detail for the 3D-XRF mono-chromatic x-ray condition and the poly-chromatic x-ray condition.We obtain a set of experimental confirmation using the poly-chromatic x-ray tube in the laboratory.It is proved that the sensitivity factor of the 3D-XRF can be directly and accurately obtained in a real calibration process.
基金supported by the National Key Research and Development Program of China(Nos.2017YFA0403801,2017YFA0206004,2018YFC1200204)the National Natural Science Foundation of China(NSFC)(Nos.81430087,11775297,U1932205).
文摘Doped elements in alloys significantly impact their performance.Conventional methods usually sputter the surface material of the sample,or their performance is limited to the surface of alloys owing to their poor penetration ability.The X-ray K-edge subtraction(KES)method exhibits great potential for the nondestructive in situ detection of element contents in alloys.However,the signal of doped elements usually deteriorates because of the strong absorption of the principal component and scattering of crystal grains.This in turn prevents the extensive application of X-ray KES imaging to alloys.In this study,methods were developed to calibrate the linearity between the grayscale of the KES image and element content.The methods were aimed at the sensitive analysis of elements in alloys.Furthermore,experiments with phantoms and alloys demonstrated that,after elaborate calibration,X-ray KES imaging is capable of nondestructive and sensitive analysis of doped elements in alloys.
基金Supported by:Multidisciplinary Center for Earthquake Engineering Research,Contract No.R271883
文摘Bridges are one of the most vulnerable components of a highway transportation network system subjected to earthquake ground motions. Prediction of resilience and sustainability of bridge performance in a probabilistic manner provides valuable information for pre-event system upgrading and post-event functional recovery of the network. The current study integrates bridge seismic damageability information obtained through empirical, analytical and experimental procedures and quantifies threshold limits of bridge damage states consistent with the physical damage description given in HAZUS. Experimental data from a large-scale shaking table test are utilized for this purpose. This experiment was conducted at the University of Nevada, Reno, where a research team from the University of California, Irvine, participated. Observed experimental damage data are processed to identify and quantify bridge damage states in terms of rotational ductility at bridge column ends. In parallel, a mechanistic model for fragility curves is developed in such a way that the model can be calibrated against empirical fragility curves that have been constructed from damage data obtained during the 1994 Northridge earthquake. This calibration quantifies threshold values of bridge damage states and makes the analytical study consistent with damage data observed in past earthquakes. The mechanistic model is transportable and applicable to most types and sizes of bridges. Finally, calibrated damage state definitions are compared with that obtained using experimental findings. Comparison shows excellent consistency among results from analytical, empirical and experimental observations.
文摘In this article, the extension to three dimensions (3D) of the blending technique that has been widely used in two dimensions (2D) to calibrate ocean chlorophyll is presented. The results thus obtained revealed a very high degree of efficiency when predicting observed values of ocean chlorophyll. The mean squared difference between the predicted and observed values of ocean chlorophyll when 3D technique was used fell far below the tolerance level which was set to the difference between satellite and observed in-situ values. The resulting blended field did not only provide better predictions of the in situ observations in areas where bottle samples cannot be obtained but also provided a smooth variation of the distribution of ocean chlorophyll throughout the year. An added advantage is its computational efficiency since data that would have been treated at least four times would be treated only once. With the advent of these results, it is believed that the modelling of the ocean life cycle will become more realistic.
基金supported by the National Natural Science Foundation of China(Grant Nos.11302220,11374292,and 31100555)the National Basic Research Program of China(Grant No.2011CB910402)
文摘We introduce a corrected sinusoidal-wave drag force method （SDFM） into optical tweezers to calibrate the trapping stiffness of the optical trap and conversion factor （CF） of photodetectors. First, the theoretical analysis and experimental result demonstrate that the correction of SDFM is necessary, especially the error of no correction is up to 11.25% for a bead of 5μm in diameter. Second, the simulation results demonstrate that the SDFM has a better performance in the calibration of optical tweezers than the triangular-wave drag force method （TDFM） and power spectrum density method （PSDM） at the same signal-to-noise ratio or trapping stiffness. Third, in experiments, the experimental standard deviations of calibration of trapping stiffness and CF with the SDFM are about less than 50% of TDFM and PSDM especially at low laser power. Finally, the experiments of stretching DNA verify that the in situ calibration with the SDFM improves the measurement stability and accuracy.
基金Project(J132012C001)supported by Technological Foundation of ChinaProject(2011YQ04013606)supported by National Major Scientific Instrument & Equipment Developing Projects,China
文摘The multi-objective genetic algorithm(MOGA) is proposed to calibrate the non-linear camera model of a space manipulator to improve its locational accuracy. This algorithm can optimize the camera model by dynamic balancing its model weight and multi-parametric distributions to the required accuracy. A novel measuring instrument of space manipulator is designed to orbital simulative motion and locational accuracy test. The camera system of space manipulator, calibrated by MOGA algorithm, is used to locational accuracy test in this measuring instrument. The experimental result shows that the absolute errors are [0.07, 1.75] mm for MOGA calibrating model, [2.88, 5.95] mm for MN method, and [1.19, 4.83] mm for LM method. Besides, the composite errors both of LM method and MN method are approximately seven times higher that of MOGA calibrating model. It is suggested that the MOGA calibrating model is superior both to LM method and MN method.
文摘Sensor location uncertainty of array degrades severely the performance of eigenstruc-ture based direction finding system.A new calibration method of sensor location is presentedwith three far field sources whose directions are not known accurately.A signal subspace basediteration algorithm for sensor location calibration is developed and its convergence to the globaloptimal point has been shown.The guide line for selecting directions of calibrating sources isgiven.Simulation results illustrate that the new method is successful and practicable.
文摘The conductance catheter technique allows real- time measurements of ventricular volume based on changes in the electrical conductance of blood within the ventricular cavity. Conductance volume measurements are corrected with a calibration coefficient, α, in order to improve accuracy. However, conductance volume measurements are also affected by parallel conductance, which may confound cali-bration coefficient estimation. This study was un-dertaken to examine the variation in α using a physical model of the left ventricle without parallel conductance. Calibration coefficients were calculated as the conductance-volume quotient (αV(t)) or the stroke conductance-stroke volume quotient (αSV). Both calibration coefficients varied as a non-linear function of the ventricular volume. Conductance volume measurements calibrated with αV(t) estimated ventricular volume to within 2.0 ±6.9%. By contrast, calibration with αSV substantially over-estimated the ventricular volume in a volume-dependent manner, increasing from 26 ±20% at 100ml to 106 ±36% at 500ml. The accuracy of conductance volume measurements is affected by the choice of calibration coefficient. Using a fixed or constant calibration coeffi-cient will result in volume measurement errors. The conductance-stroke volume quotient is associated with particularly significant and volume-dependent measurement errors. For this reason, conductance volume measurements should ideally be calibrated with an alternative measurement of ventricular vol-ume.
文摘It is well known that the accuracy of camera calibration is constrained by the size of the reference plate,it is difficult to fabricate large reference plates with high precision.Therefore,it is non-trivial to calibrate a camera with large field of view(FOV).In this paper,a method is proposed to construct a virtual large reference plate with high precision.Firstly,a high precision datum plane is constructed with a laser interferometer and one-dimensional air guideway,and then the reference plate is positioned at different locations and orientations in the FOV of the camera.The feature points of reference plate are projected to the datum plane to obtain a virtual large reference plate with high-precision.The camera is moved to several positions to get different virtual reference plates,and the camera is calibrated with the virtual reference plates.The experimental results show that the mean re-projection error of the camera calibrated with the proposed method is 0.062 pixels.The length of a scale bar with standard length of 959.778mm was measured with a vision system composed of two calibrated cameras,and the length measurement error is 0.389mm.
基金support from the National Natural Sci-ence Foundation of China(grant nos.T2225010,32171399,and 32171456)Guangdong Basic and Applied Basic Research Foundation(grant no.2023A1515011267)+1 种基金Science and Technalogy Program of Guangzhou,China(grant nos.2024B03J0121 and 2024B03J1284)the Independent Fund of the State Key Laboratory of Optoelectronic Ma-terials and Technologies(Sun YatSen University)under grant no.
文摘Monitoring multiplexed biochemical markers is beneficial for the comprehensive evaluation of diabetes-associated complications.Techniques for multiplexed analyses in interstitial fluids have often been restricted by the difficulties of electrode materials in accurately detecting chemicals in complex subcutaneous spaces.In particular,the signal stability of enzyme-based sensing electrodes often inevitably decreases due to enzyme degradation or interference in vivo.In this study,we developed a self-calibrating multiplexed microneedle(MN)electrode array(SC-MMNEA)capable of continuous,real-time monitoring of multiple types of bioanalytes(glucose,cholesterol,uric acid,lactate,reactive oxygen species[ROSs],Na+,K+,Ca2+,and pH)in the subcutaneous space.Each type of analyte was detected by a discrete MN electrode assembled in an integrated array with single-MN resolution.Moreover,this device utilized an MN-delivery-mediated self-calibration technique to address the inherent problem of decreased accuracy of implantable electrodes caused by long-term tissue variation and enzyme degradation,and this technique might increase the reliability of the MN sensors.Our results indicated that SC-MMNEA could provide real-time monitoring of multiplexed analyte concentrations in a rat model with good accuracy,especially after self-calibration.SC-MMNEA has the advantages of in situ and minimally invasive monitoring of physiological states and the potential to promote wearable devices for long-term monitoring of chemical species in vivo.
基金supported by the National Natural Science Foundation of China under Grant numbers 61825102,62371115,62001096,U21A20460,52021001Science and Technology Major Project of Tibetan Autonomous Region of China under grant no.XZ202201ZD0001Gand the Medico-Engineering Cooperation Funds,Fundamental Research Funds for the Central Universities,UESTC under Grant nos.ZYGX2020ZB041,ZYGX2021YGLH002,and ZYGX2021YGLH007.
文摘Flexible electrochemical biosensors enable the in-situ monitoring and quantification of human biochemical constituents in molecular scale,spearheading and thriving the field toward precision medicine.However,specific biorecognition elements for multiplexed biomarkers detection,temperature stability and versatility need to be improved for higher adaption.Here,we propose a bioactive sensor patch comprising a non-enzyme Co_(3)O_(4)/carbon fiber-based biorecognition element and a temperature calibration unit.The optimized serpentine configuration renders the sensor intimate and seamless attachment with skin,operating robustly even subjected to 40%tensile strain.The fiber-based sensor could selectively monitor dopa-mine and lactic acid contents based on cyclic voltammetry and amperometry,respectively.The bioanalytical results at room temperature indicate that the electrochemical biosensor has a wide detection range(0.001–1.100 mM for dopamine and 2–35 mM for lactic acid),excellent selectivity and reproducibility(maximum error 3.2%for dopamine and 5.6%for lactic acid).In addition,temperature calibration contour maps of these two biomarkers are established in an ambient temperature range from 25 to 45℃.The continuously collected data could be aggregated and wirelessly transmitted to portable devices using an electrochemical signal transducer and an acquisition module,promising personalized and preventative health care in various scenarios.
基金supported by the National Natural Science Foundation of China(Grant No.52175238)the Xinjiang Key Research and Development Program(Grant No.2022B02022-1)+1 种基金the Engineering Research and Development of High-efficiency Intelligent Residue Film Recycling Equipment in 2022(Second Batch)(Grant No.CEIEC-2022-ZM02-0226)the Integrated Pilot Project for Research,Development,Manufacturing,and Promotion of Agricultural Machinery in Shandong Province(Grant No.NJYTHSD-202321).
文摘This study constructed a numerical model using the discrete element software EDEM to address the current lack of calibrated contact parameters for peanut seedling membranes and the absence of precise simulation model parameters for mechanized separation. The Hysteretic Spring Contact Model (HSCM) was employed to calibrate the contact parameters of peanut seedling membranes. The angle of repose of peanut seedling membranes was determined through image processing combined with the least squares method. Through central composite design (CCD), a second-order response model linking the contact parameters to the angle of repose was established. Optimization was achieved by using the angle of repose obtained from physical tests as the objective. Secondary simulation tests were conducted with the calibrated parameters, revealing a relative error of 1.37% between the simulated and physical angles of repose. This confirmed the effectiveness of the parameters in calibrating peanut seedling membrane characteristics. The findings offer theoretical and empirical support for discrete element simulations of peanut seedling membrane separation and peanut straw pulverization processes.
文摘High-precision magnetic field measurements are crucial for understanding Earth’s internal structure,space environment,and dynamic geomagnetic variations.Data from the Fluxgate Magnetometer (FGM) on the Macao Science Satellite-1A (MSS-1A),added to data from other space-based magnetometers,should increase significantly the ability of scientists to observe changes in Earth’s magnetic field over time and space.Additionally,the MSS-1A’s FGM is intended to help identify magnetic disturbances affecting the spacecraft itself.This report focuses on the in-flight calibration of the MSS-1 FGM.A scalar calibration,independent of geomagnetic field models,was performed to correct offsets,sensitivities,and misalignment angles of the FGM.Using seven months of data,we find that the in-flight calibration parameters show good stability.We determined Euler angles describing the rotational relationship between the FGM and the Advanced Stellar Compass (ASC) coordinate system using two approaches:calibration with the CHAOS-7 geomagnetic field model,and simultaneous estimation of Euler angles and Gaussian spherical harmonic coefficients through self-consistent modeling.The accuracy of Euler angles describing the rotation was better than 18 arcsec.The calibrated FGM data exhibit good agreement with the calibrated data of the Vector Field Magnetometer (VFM),which is the primary vector magnetometer of the satellite.These calibration efforts have significantly improved the accuracy of the FGM measurements,which are now providing reliable data for geomagnetic field studies that promise to advance our understanding of the Earth’s magnetic environment.
文摘1.A.Mertha,“‘Stressing Out’:Cadre Calibration and Affective Proximity to the CCP in Reform-Era China”,The China Quarterly,Vol.229,2017,pp.64-85.2.B.L.McCormick,“Book Review of‘The Chinese Communist Party's Capacity to Rule:Ideology,Legitimacy and Party Cohesion’”,The China Journal,Vol.77,2017,pp.161-163.
基金Project supported by the National Key Research and Development Program of China(Grant No.2020YFC2201001)the Guangdong Major Project of Basic and Applied Basic Research(Grant No.2019B030302001)+1 种基金the National Natural Science Foundation of China(Grant Nos.12105373,12105374,and 11927812)the Science and Technology Research Project of Jiangxi Provincial Department of Education(Grant No.GJJ2402105).
文摘Accurate thrust assessment is crucial for characterizing the performance of micro-thrusters.This paper presents a comprehensive evaluation of the thrust generated by a needle-type indium field emission electric propulsion(In-FEEP)micro-thruster using three methods based on a pendulum:direct thrust measurement,indirect plume momentum transfer and beam current diagnostics.The experimental setup utilized capacitive displacement sensors for force detection and a voice coil motor as a feedback actuator,achieving a resolution better than 0.1μN.Key performance factors such as ionization and plume divergence of ejected charged particles were also examined.The study reveals that the high applied voltage induces significant electrostatic interference,becoming the dominant source of error in direct thrust measurements.Beam current diagnostics and indirect plume momentum measurements were conducted simultaneously,showing strong agreement within a deviation of less than 0.2N across the operational thrust range.The results from all three methods are consistent within the error margins,verifying the reliability of the indirect measurement approach and the theoretical thrust model based on the electrical parameters of In-FEEP.
文摘To enhance direction of arrival(DOA)estimation accuracy,this paper proposes a low-cost method for calibrating farfield steering vectors of large aperture millimeter wave radar(mmWR).To this end,we first derive the steering vectors with amplitude and phase errors,assuming that mmWR works in the time-sharing mode.Then,approximate relationship between the near-field calibration steering vector and the far-field calibration steering vector is analyzed,which is used to accomplish the mapping between the two of them.Finally,simulation results verify that the proposed method can effectively improve the angle measurement accuracy of mmWR with existing amplitude and phase errors.
文摘A recent single-center retrospective study proposed novel combinations of hematological parameters and scoring systems for predicting severe acute pancre-atitis.While these combinations showed promising predictive performance,several limitations warrant consideration,including the lack of calibration,the absence of key inflammatory markers such as procalcitonin,and practical challenges in integrating these models into routine clinical workflows.To improve predictive accuracy and clinical applicability,prospective validation and the inclusion of additional variables are recommended.
