With the investigated subject of 82B rod, the interlamellar spacings of pearlite at different isothermal transformation temperatures and different cooling rates during continuous cooling transformation were measured, ...With the investigated subject of 82B rod, the interlamellar spacings of pearlite at different isothermal transformation temperatures and different cooling rates during continuous cooling transformation were measured, and the effect of the isothermal transformation temperature and cooling rate on the interlamellar spacing was analyzed quantitatively. Moreover, the relationship models between undercooling and interlamellar spacing were presented by data regression. The experimental results show that the relationship between undercooling and reciprocal interlamellar spacing remains linear when the undercooling is not very large, or else, the interlamellar spacing tends to be constant and the relationship will deviate from linearity.展开更多
In consideration of the online measurement of the component content in rare earth countercurrent extraction separation process, the soft sensor method based on hybrid modeling was proposed to measure the rare earth co...In consideration of the online measurement of the component content in rare earth countercurrent extraction separation process, the soft sensor method based on hybrid modeling was proposed to measure the rare earth component content. The hybrid models were composed of the extraction equilibrium calculation model and the Radial Basis Function (RBF) Neural Network (NN) error compensation model; the parameters of compensation model were optimized by the hierarchical genetic algorithms (HGA). In addition, application experiment research of this proposed method was carried out in the rare earth separation production process of a corporation. The result shows that this method is effective and can realize online measurement for the component content of rare earth in the countercurrent extraction.展开更多
Custom 465(C465)is a martensitic stainless steel known for its high strength,toughness,and corrosion resistance,widely used in aerospace,automotive,and medical industries.However,limited work has been conducted on its...Custom 465(C465)is a martensitic stainless steel known for its high strength,toughness,and corrosion resistance,widely used in aerospace,automotive,and medical industries.However,limited work has been conducted on its additive manufacturing(AM)and no dedicated heat treatments have been developed for additively manufactured C465 to optimize its strength-ductility trade-off.In this work,the C465 was fabricated via laser powder bed fusion.The effect of hot isostatic pressing,solid solution,cryogenic treatment(−78.5℃),and aging on the composition homogenization,austenite-to-martensite transition,and Ni_(3)Ti precipitation were systemically investigated.The atom probe tomography analysis reveals that Mo atoms accumulate on Ni_(3)Ti precipitate surfaces and inhibits the Ni_(3)Ti growth,con-tributing to the enhanced strength of C465.The modified heat treatment for additively manufactured C465 reaches comparable tensile strength with the wrought counterpart,yielding an ultimate tensile strength of 1773 MPa,yield strength of 1686 MPa,and elongation of 6.5%.A yield strength calculation model was proposed and validated with measured strength under various heat treatments,providing valuable insight for heat treatment design towards diverse industrial applications.展开更多
The deformation energy(Wd)of soil-like tectonic coal is crucial for investigating the mechanism of coal and gas outbursts.Tectonic coal has a significant nonlinear constitutive relationship,which makes traditional ela...The deformation energy(Wd)of soil-like tectonic coal is crucial for investigating the mechanism of coal and gas outbursts.Tectonic coal has a significant nonlinear constitutive relationship,which makes traditional elastic-based models for computing Wdunsuitable.Inspired by critical state soil mechanics,this study theoretically established a new calculation model of Wdsuitable for the coal with nonlinear deformation characteristics.In the new model,the relationship between energy and stress no longer follows the square law(observed in traditional linear elastic models)but exhibits a power function,with the theoretical value of the power exponent ranging between 1 and 2.Hydrostatic cyclic loading and unloading experiments were conducted on four groups of tectonic coal samples and one group of intact coal samples.The results indicated that the relationship between Wdand stress for both intact and tectonic coal follows a power law.The exponents for intact and tectonic coal are close to 2 and 1,respectively.The stress-strain curve of intact coal exhibits small deformation and linear characteristics,whereas the stress-strain curves of tectonic coal show large deformation and nonlinear characteristics.The study specifically investigates the role of coal viscosity in the cyclic loading/unloading process.The downward bending in the unloading curves can be attributed to the time-dependent characteristics of coal,particularly its viscoelastic behavior.Based on experimental statistics,the calculation model of Wdwas further simplified.The simplified model involves only one unknown parameter,which is the power exponent between Wdand stress.The measured Wdof the coal samples increases with the number of load cycles.This phenomenon is attributed to coal's viscoelastic deformation.Within the same stress,the Wdof tectonic coal is an order of magnitude greater than that of intact coal.The calculation model of Wdproposed in this paper provides a new tool for studying the energy principle of coal and gas outbursts.展开更多
Analysing the heat states of transformers under DC bias requires careful consideration of their own structural and material characteristics.Although the 3D finite element method(FEM)is a reliable way of simulating all...Analysing the heat states of transformers under DC bias requires careful consideration of their own structural and material characteristics.Although the 3D finite element method(FEM)is a reliable way of simulating all the details of transformers,it may be time-consuming or have encountered convergence difficulties due to the complex internal structure of the transformer.To address the issues,this paper proposes a fast calculation model for estimating the top-oil temperature rise and the winding hotspot temperature rise of single-phase three-limb transformers under DC bias.This model is based on the coupling principle of electric circuits,magnetic circuits and thermal circuits,and it considers the winding loss and core loss of the transformer under DC bias as key factors linking electromagnetic and thermal effects.All the model parameters can be obtained from nameplate data and regular test data to ensure the method's engineering practicality.The results were compared with 3D FEM,demonstrating favourable performance in terms of computational speed and availability.展开更多
The prediction of the rolling force and thickness ratio plays an important role in the development and application of bimetallic composite plates.To analyze the rolling force of the bimetallic composite plate more acc...The prediction of the rolling force and thickness ratio plays an important role in the development and application of bimetallic composite plates.To analyze the rolling force of the bimetallic composite plate more accurately,a novel hypothesis based on Orowan's theory was proposed.The variation in the thickness of each differential element at different positions was considered to establish the analytical model.According to the characteristics of bimetallic composite plate rolling,the rolling deformation can be divided into forward and backward slip zones.The initial thickness ratio after rolling was predetermined by the thickness ratio before rolling;the rolling force balance of the upper and lower rollers was considered the convergence condition;and the final thickness ratio of the bimetallic composite plate was obtained by iterative calculation.The calculation results of the analytical model were compared with the measured and simulated data.The results showed that the errors in the calculation of the rolling force and thickness ratio were both less than 10%.The analytical model has high precision,meets engineering requirements,and has important reference significance for rolling process optimization and thickness ratio prediction.展开更多
[Objective] The aim was to build an optimal leaf area measurement model of E. urophylla and E. grandis×E.urophylla. [Method] The correlation between leaf area and leaf＇s eigenvalue of E. urophylla and E. grandis...[Objective] The aim was to build an optimal leaf area measurement model of E. urophylla and E. grandis×E.urophylla. [Method] The correlation between leaf area and leaf＇s eigenvalue of E. urophylla and E. grandis×E.urophylla were studied. [Result] There was certain difference in leaf characteristics values between the 2 species. The leaf areas of E. urophylla and E. grandis×E.urophylla both had significant correlation with leaf length,leaf width,leaf perimeter,leaf length × leaf width,the ratio of leaf length to leaf width,shape factor,etc.,so the factors could be constructed into a regression model with leaf area. Among them,the best 2 models for leaf area calculation which were built by leaf length × leaf width of E. urophylla and E. grandis×E.urophylla both had relatively high accuracy and practical applications. [Conclusion] The research provides a simple and effective leaf area measurement method for studies on the 2 tree species.展开更多
Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in d...Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in different sites.A spherical close-packed model for graphite particle was developed.The fractions of surface carbon atoms（SCA） and edge carbon atoms（ECA） were derived in the expression of crystallographic parameters and particle size,and the effects of ECA on the initial irreversible capacity and the mechanisms of action were analyzed and verified.The results show that the atoms on the edge are more active for electrochemical reactions,such as electrolyte decomposition and tendency to form stable bond with other atoms and groups.For the practical graphite particle,corresponding modifying factors were introduced to revise the difference in calculating results.The revised expression is suitable for the calculation of the fractions of SCA and ECA for carbon materials such as graphite,disordered carbon and modified graphite.展开更多
This paper shows a calculation model and a method for predicting the tensile strength of the random distributed short fiber composite.On the basis of Renjie Mao's model,the longitudinal tensile strength of the ali...This paper shows a calculation model and a method for predicting the tensile strength of the random distributed short fiber composite.On the basis of Renjie Mao's model,the longitudinal tensile strength of the aligned short fiber composite is formulated.Considering the transverse tensile strength and in plane shear strength of the unidirectional fiber composite,and the stress transformation relations of two couples of axes,the stress of the unidirectional fiber composite when it is loaded at an arbitrary angle is obtained.With the aid of an equivalence relation,the calculation formulation of the tensile strength of the random short fiber reinforced composite is deduced.展开更多
This paper deals with the vertical vibration, the horizontal translatory and flexural vibrations of plate gate with a flat bottom under the action of unstable submerged underflow. Based on a non linear resonant oscil...This paper deals with the vertical vibration, the horizontal translatory and flexural vibrations of plate gate with a flat bottom under the action of unstable submerged underflow. Based on a non linear resonant oscillator model by which the coupled excitation mechanism between the unstable vortices and gate motion can be simulated, the differential equations for the three types of gate vibrations are established. The parameters in the equations are determined by model experiments. Then, the steady state non linear responses of the three types of gate vibrations are calculated. The calculation results are in good agreement with the experimental data of gate vibrations with different reduced velocity and gate parameters by previous researchers.展开更多
Throught fusion of the mechanism modeling and the neural networks modeling,a compo- nent content soft-sensor,which is composed of the equilibrium calculation model for multi-component rare earth extraction and the err...Throught fusion of the mechanism modeling and the neural networks modeling,a compo- nent content soft-sensor,which is composed of the equilibrium calculation model for multi-component rare earth extraction and the error compensation model of fuzzy system,is proposed to solve the prob- lem that the component content in countercurrent rare-earth extraction process is hardly measured on-line.An industry experiment in the extraction Y process by HAB using this hybrid soft-sensor proves its effectiveness.展开更多
Automatic straightening process is a nonlinear process, and affected by manyfactors. The straightening technology CAM system has been designed and built up to straightenshafts, which mainly consists of the straighteni...Automatic straightening process is a nonlinear process, and affected by manyfactors. The straightening technology CAM system has been designed and built up to straightenshafts, which mainly consists of the straightening technology's database and the model ofstroke-controlled precise straightening calculation model. The operational test of the CAM systemhas been passed.展开更多
Through the flexural behavior test of coral aggregate reinforced concrete beams(CARCB) and ordinary Portland reinforced concrete beams(OPRCB), and based on the parameters of concrete types, concrete strength grades an...Through the flexural behavior test of coral aggregate reinforced concrete beams(CARCB) and ordinary Portland reinforced concrete beams(OPRCB), and based on the parameters of concrete types, concrete strength grades and reinforcement ratios, the crack development, failure mode, midspan deflection and flexural capacity were studied, the relationships of bending moment-midspan deflection, load-longitudinal tensile reinforcement strain, load-maximum crack width were established, and a calculation model for the flexural capacity of CARCB was suggested. The results showed that with the increase in the reinforcement ratio and concrete strength grade, the crack bending moment(Mcr)and ultimate bending moment(Mu) of CARCB gradually increased. The characteristics of CARCB and OPRCB are basically the same. Furthermore, through increasing the concrete strength grade and reinforcement ratio, Mcr/Mu could be increased to delay the cracking of CARCB. As the load increased, crack width(w) would also increase. At the beginning of the loading, w increased slowly. And then it increased rapidly when the load reached to the ultimate load, which then led to beam failure. Meanwhile, with a comprehensive consideration of the effects of steel corrosion on the loss of steel section and the decrease of steel yield strength, a more reasonable calculation model for the flexural capacity of CARCB was proposed.展开更多
Small dispersoid particles inhibit recrystallization which is critical in controlling the grain structure of many high strength low alloy steels. A general kinetic model has been developed to predict precipitation of ...Small dispersoid particles inhibit recrystallization which is critical in controlling the grain structure of many high strength low alloy steels. A general kinetic model has been developed to predict precipitation of V（C, N） in vanadium microalloyed steels with a series of carbon and nitrogen contents. The solubility product and driving force of carbonitrides precipitated in austenite as well as the interracial energy and other parameters can be evaluated to predict Nucleation rates-Temperature （NrT） and Precipitation-Time-Temperature （PTT） diagram. By using stress relaxation tests and fitting with Avrami equation, it is possible to draw PTT diagrams. The predictions of the model coincide with results of experimental investigation on V（C, N） precipitation in austenite. The nose temperature is around 850 ℃ obtained by experiment which is different from the prediction of the model and the difference is 30 ℃, and nitrogen has more effect on the shape of ＂C＂ curve of PTT diagram than carbon that makes ＂C＂ curve move leftward significantly.展开更多
To study the flexural behavior and calculation model,8 coral aggregate concrete(CAC)beams with different types of steel were designed.The flexural behavior of CAC beam was tested.The failure mode,bearing capacity,the ...To study the flexural behavior and calculation model,8 coral aggregate concrete(CAC)beams with different types of steel were designed.The flexural behavior of CAC beam was tested.The failure mode,bearing capacity,the maximum crack width(ws)and average crack spacing(lm)were studied.A calculation model for the bearing capacity of CAC beam was proposed.The results indicated that with the steel strength increased,the cracking moment(Mcr)and ultimate moment(Mu)of CAC beam increased,and the development of the ws gradually slowed,which effectively inhibited the formation of cracks and improved the flexural behavior of CAC beam.For CAC structures in the ocean engineering,it is recommended to use organic new coated steel to extend its effective service life.In addition,considering the influence of steel corrosion,a calculation model for the Mcr,Mu,lm and ws of CAC beam was established.展开更多
Based on twin-roll casting, a cast-rolling force model was proposed to predict the rolling force in the bimetal solid-liquid cast-rolling bonding(SLCRB) process. The solid-liquid bonding zone was assumed to be below t...Based on twin-roll casting, a cast-rolling force model was proposed to predict the rolling force in the bimetal solid-liquid cast-rolling bonding(SLCRB) process. The solid-liquid bonding zone was assumed to be below the kiss point(KP). The deformation resistance of the liquid zone was ignored. Then, the calculation model was derived. A 2D thermal-flow coupled simulation was established to provide a basis for the parameters in the model, and then the rolling forces of the Cu/Al clad strip at different rolling speeds were calculated. Meanwhile, through measurement experiments, the accuracy of the model was verified. The influence of the rolling speed, the substrate strip thickness, and the material on the rolling force was obtained. The results indicate that the rolling force decreases with the increase of the rolling speed and increases with the increase of the thickness and thermal conductivity of the substrate strip. The rolling force is closely related to the KP height. Therefore, the formulation of reasonable process parameters to control the KP height is of great significance to the stability of cast-rolling forming.展开更多
By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture t...By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.展开更多
On the basis of the existing originally modified calculation models of theoretical combustion temperature（TCT）,some factors,such as the combustion ratio of pulverized coal injection（PCI）,the decomposition heat of ...On the basis of the existing originally modified calculation models of theoretical combustion temperature（TCT）,some factors,such as the combustion ratio of pulverized coal injection（PCI）,the decomposition heat of PCI and the heat consumption of SiO2 in ash reduced in high temperature environment,were amended and improved to put forward a more comprehensive model for calculating TCT.The influences of each improvement on TCT were studied and the results were analyzed compared with those of traditional model and originally modified model,which showed that the present model could reflect the thermal state of a hearth more effectively.展开更多
The unfrozen water content of rock during freezing and thawing has an important influence on its physical and mechanical properties.This study presented a model for calculating the unfrozen water content of rock durin...The unfrozen water content of rock during freezing and thawing has an important influence on its physical and mechanical properties.This study presented a model for calculating the unfrozen water content of rock during freezing and thawing process,considering the influence of unfrozen water film and rock pore structure,which can reflect the hysteresis and super-cooling effects.The pore size distribution cu rves of red sandsto ne and its unfrozen water conte nt under different temperatures during the freezing and thawing process were measured using nuclear magnetic resonance(NMR) to validate the proposed model.Comparison between the experimental and calculated results indicated that the theoretical model accu rately reflected the water content change law of red sandstone during the freezing and thawing process.Furthermore,the influences of Hamaker constant and surface relaxation parameter on the model results were examined.The results showed that the appropriate magnitude order of Hamaker constant for the red sandstone was 10J to 10J;and when the relaxation parameter of the rock surface was within 25-30 μm/ms,the calculated unfrozen water content using the proposed model was consistent with the experimental value.展开更多
The use of open-type check dams in mountainous areas has become common practice in order to mitigate the effects of debris flow and extend the service life of engineering structures.The beam dam,a common debris flow c...The use of open-type check dams in mountainous areas has become common practice in order to mitigate the effects of debris flow and extend the service life of engineering structures.The beam dam,a common debris flow control system,has received less attention in research on the impact process of debris flow and check dams compared to solid check dams.Additionally,the estimation of impact pressure in debris flow primarily considers debris flow characteristics,without taking into account the influence of geometric characteristics of the transmission structure.To better understand the impact process of debris flow on beam dams,a series of small-scale debris flow impact tests were conducted in a model flume.Key parameters,including velocity,depth,and impact pressure,were measured.The results show that the maximum impact pressure of debris flow is affected by both the characteristics of the debris flow and the relative opening size of the beam dam.Due to flow and edge occlusion in the middle of the beam dam,the discharge of debris flow is enhanced,resulting in a longer impact process and higher maximum impact pressure.Based on these findings,a calculation model of the maximum impact pressure of debris flow at the midpoint of the middle beam is proposed,which can be used to estimate the impact of debris flow on the discharge part of the beam dam.展开更多
文摘With the investigated subject of 82B rod, the interlamellar spacings of pearlite at different isothermal transformation temperatures and different cooling rates during continuous cooling transformation were measured, and the effect of the isothermal transformation temperature and cooling rate on the interlamellar spacing was analyzed quantitatively. Moreover, the relationship models between undercooling and interlamellar spacing were presented by data regression. The experimental results show that the relationship between undercooling and reciprocal interlamellar spacing remains linear when the undercooling is not very large, or else, the interlamellar spacing tends to be constant and the relationship will deviate from linearity.
文摘In consideration of the online measurement of the component content in rare earth countercurrent extraction separation process, the soft sensor method based on hybrid modeling was proposed to measure the rare earth component content. The hybrid models were composed of the extraction equilibrium calculation model and the Radial Basis Function (RBF) Neural Network (NN) error compensation model; the parameters of compensation model were optimized by the hierarchical genetic algorithms (HGA). In addition, application experiment research of this proposed method was carried out in the rare earth separation production process of a corporation. The result shows that this method is effective and can realize online measurement for the component content of rare earth in the countercurrent extraction.
基金supported by the National Key Research and Development Program of China(No.2022YFB4600302)the Fundamental Research Funds for the Central Universities,China(No.FRF-IDRY-23-011).
文摘Custom 465(C465)is a martensitic stainless steel known for its high strength,toughness,and corrosion resistance,widely used in aerospace,automotive,and medical industries.However,limited work has been conducted on its additive manufacturing(AM)and no dedicated heat treatments have been developed for additively manufactured C465 to optimize its strength-ductility trade-off.In this work,the C465 was fabricated via laser powder bed fusion.The effect of hot isostatic pressing,solid solution,cryogenic treatment(−78.5℃),and aging on the composition homogenization,austenite-to-martensite transition,and Ni_(3)Ti precipitation were systemically investigated.The atom probe tomography analysis reveals that Mo atoms accumulate on Ni_(3)Ti precipitate surfaces and inhibits the Ni_(3)Ti growth,con-tributing to the enhanced strength of C465.The modified heat treatment for additively manufactured C465 reaches comparable tensile strength with the wrought counterpart,yielding an ultimate tensile strength of 1773 MPa,yield strength of 1686 MPa,and elongation of 6.5%.A yield strength calculation model was proposed and validated with measured strength under various heat treatments,providing valuable insight for heat treatment design towards diverse industrial applications.
基金supported by the Fundamental Research Funds for the Central Universities(No.2024QN11072)National Natural Science Foundation of China(Nos.52404264 and 52174217)State Key Program of the National Natural Science Foundation of China(No.52034008)。
文摘The deformation energy(Wd)of soil-like tectonic coal is crucial for investigating the mechanism of coal and gas outbursts.Tectonic coal has a significant nonlinear constitutive relationship,which makes traditional elastic-based models for computing Wdunsuitable.Inspired by critical state soil mechanics,this study theoretically established a new calculation model of Wdsuitable for the coal with nonlinear deformation characteristics.In the new model,the relationship between energy and stress no longer follows the square law(observed in traditional linear elastic models)but exhibits a power function,with the theoretical value of the power exponent ranging between 1 and 2.Hydrostatic cyclic loading and unloading experiments were conducted on four groups of tectonic coal samples and one group of intact coal samples.The results indicated that the relationship between Wdand stress for both intact and tectonic coal follows a power law.The exponents for intact and tectonic coal are close to 2 and 1,respectively.The stress-strain curve of intact coal exhibits small deformation and linear characteristics,whereas the stress-strain curves of tectonic coal show large deformation and nonlinear characteristics.The study specifically investigates the role of coal viscosity in the cyclic loading/unloading process.The downward bending in the unloading curves can be attributed to the time-dependent characteristics of coal,particularly its viscoelastic behavior.Based on experimental statistics,the calculation model of Wdwas further simplified.The simplified model involves only one unknown parameter,which is the power exponent between Wdand stress.The measured Wdof the coal samples increases with the number of load cycles.This phenomenon is attributed to coal's viscoelastic deformation.Within the same stress,the Wdof tectonic coal is an order of magnitude greater than that of intact coal.The calculation model of Wdproposed in this paper provides a new tool for studying the energy principle of coal and gas outbursts.
基金supported by the National Natural Science Foundation of China Joint Fund Key Project(Grant U22B20118).
文摘Analysing the heat states of transformers under DC bias requires careful consideration of their own structural and material characteristics.Although the 3D finite element method(FEM)is a reliable way of simulating all the details of transformers,it may be time-consuming or have encountered convergence difficulties due to the complex internal structure of the transformer.To address the issues,this paper proposes a fast calculation model for estimating the top-oil temperature rise and the winding hotspot temperature rise of single-phase three-limb transformers under DC bias.This model is based on the coupling principle of electric circuits,magnetic circuits and thermal circuits,and it considers the winding loss and core loss of the transformer under DC bias as key factors linking electromagnetic and thermal effects.All the model parameters can be obtained from nameplate data and regular test data to ensure the method's engineering practicality.The results were compared with 3D FEM,demonstrating favourable performance in terms of computational speed and availability.
基金Supported by National Key Research and Development Program of China(Grant No.2018YFA0707300)Major Program of National Natural Science Foundation of China(Grant No.U22A20188)+1 种基金General Program of National Natural Science Foundation of China(Grant No.51974196)Postdoctoral Science Foundation of China(Grant No.201903D421047)。
文摘The prediction of the rolling force and thickness ratio plays an important role in the development and application of bimetallic composite plates.To analyze the rolling force of the bimetallic composite plate more accurately,a novel hypothesis based on Orowan's theory was proposed.The variation in the thickness of each differential element at different positions was considered to establish the analytical model.According to the characteristics of bimetallic composite plate rolling,the rolling deformation can be divided into forward and backward slip zones.The initial thickness ratio after rolling was predetermined by the thickness ratio before rolling;the rolling force balance of the upper and lower rollers was considered the convergence condition;and the final thickness ratio of the bimetallic composite plate was obtained by iterative calculation.The calculation results of the analytical model were compared with the measured and simulated data.The results showed that the errors in the calculation of the rolling force and thickness ratio were both less than 10%.The analytical model has high precision,meets engineering requirements,and has important reference significance for rolling process optimization and thickness ratio prediction.
基金Supported by Key Science and Technology Project of Forestry in Guangxi Province for the Eleventh Five-year Plan ([2009] No.8)~~
文摘[Objective] The aim was to build an optimal leaf area measurement model of E. urophylla and E. grandis×E.urophylla. [Method] The correlation between leaf area and leaf＇s eigenvalue of E. urophylla and E. grandis×E.urophylla were studied. [Result] There was certain difference in leaf characteristics values between the 2 species. The leaf areas of E. urophylla and E. grandis×E.urophylla both had significant correlation with leaf length,leaf width,leaf perimeter,leaf length × leaf width,the ratio of leaf length to leaf width,shape factor,etc.,so the factors could be constructed into a regression model with leaf area. Among them,the best 2 models for leaf area calculation which were built by leaf length × leaf width of E. urophylla and E. grandis×E.urophylla both had relatively high accuracy and practical applications. [Conclusion] The research provides a simple and effective leaf area measurement method for studies on the 2 tree species.
基金Project (09001232) supported by the Doctoral Foundation of Henan University of Science and Technology,China
文摘Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in different sites.A spherical close-packed model for graphite particle was developed.The fractions of surface carbon atoms（SCA） and edge carbon atoms（ECA） were derived in the expression of crystallographic parameters and particle size,and the effects of ECA on the initial irreversible capacity and the mechanisms of action were analyzed and verified.The results show that the atoms on the edge are more active for electrochemical reactions,such as electrolyte decomposition and tendency to form stable bond with other atoms and groups.For the practical graphite particle,corresponding modifying factors were introduced to revise the difference in calculating results.The revised expression is suitable for the calculation of the fractions of SCA and ECA for carbon materials such as graphite,disordered carbon and modified graphite.
文摘This paper shows a calculation model and a method for predicting the tensile strength of the random distributed short fiber composite.On the basis of Renjie Mao's model,the longitudinal tensile strength of the aligned short fiber composite is formulated.Considering the transverse tensile strength and in plane shear strength of the unidirectional fiber composite,and the stress transformation relations of two couples of axes,the stress of the unidirectional fiber composite when it is loaded at an arbitrary angle is obtained.With the aid of an equivalence relation,the calculation formulation of the tensile strength of the random short fiber reinforced composite is deduced.
文摘This paper deals with the vertical vibration, the horizontal translatory and flexural vibrations of plate gate with a flat bottom under the action of unstable submerged underflow. Based on a non linear resonant oscillator model by which the coupled excitation mechanism between the unstable vortices and gate motion can be simulated, the differential equations for the three types of gate vibrations are established. The parameters in the equations are determined by model experiments. Then, the steady state non linear responses of the three types of gate vibrations are calculated. The calculation results are in good agreement with the experimental data of gate vibrations with different reduced velocity and gate parameters by previous researchers.
基金Supported by National Natural Science Foundation of P.R.China(50474020,60534010,60504006)
文摘Throught fusion of the mechanism modeling and the neural networks modeling,a compo- nent content soft-sensor,which is composed of the equilibrium calculation model for multi-component rare earth extraction and the error compensation model of fuzzy system,is proposed to solve the prob- lem that the component content in countercurrent rare-earth extraction process is hardly measured on-line.An industry experiment in the extraction Y process by HAB using this hybrid soft-sensor proves its effectiveness.
文摘Automatic straightening process is a nonlinear process, and affected by manyfactors. The straightening technology CAM system has been designed and built up to straightenshafts, which mainly consists of the straightening technology's database and the model ofstroke-controlled precise straightening calculation model. The operational test of the CAM systemhas been passed.
基金financially supported by the National Key Basic Research Development Plan of China(973 Program,Grant No.2015CB655102)the National Natural Science Foundation of China(Grant Nos.51508272 and 51678304)+2 种基金the Natural Science Foundation of Jiangsu Province(Grant No.BK20180433)the Project funded by China Postdoctoral Science Foundation(Grant No.2018M630558)the Open Research Funds for State Key Laboratory of High Performance Civil Engineering Materials(Grant No.2015CEM001)
文摘Through the flexural behavior test of coral aggregate reinforced concrete beams(CARCB) and ordinary Portland reinforced concrete beams(OPRCB), and based on the parameters of concrete types, concrete strength grades and reinforcement ratios, the crack development, failure mode, midspan deflection and flexural capacity were studied, the relationships of bending moment-midspan deflection, load-longitudinal tensile reinforcement strain, load-maximum crack width were established, and a calculation model for the flexural capacity of CARCB was suggested. The results showed that with the increase in the reinforcement ratio and concrete strength grade, the crack bending moment(Mcr)and ultimate bending moment(Mu) of CARCB gradually increased. The characteristics of CARCB and OPRCB are basically the same. Furthermore, through increasing the concrete strength grade and reinforcement ratio, Mcr/Mu could be increased to delay the cracking of CARCB. As the load increased, crack width(w) would also increase. At the beginning of the loading, w increased slowly. And then it increased rapidly when the load reached to the ultimate load, which then led to beam failure. Meanwhile, with a comprehensive consideration of the effects of steel corrosion on the loss of steel section and the decrease of steel yield strength, a more reasonable calculation model for the flexural capacity of CARCB was proposed.
文摘Small dispersoid particles inhibit recrystallization which is critical in controlling the grain structure of many high strength low alloy steels. A general kinetic model has been developed to predict precipitation of V（C, N） in vanadium microalloyed steels with a series of carbon and nitrogen contents. The solubility product and driving force of carbonitrides precipitated in austenite as well as the interracial energy and other parameters can be evaluated to predict Nucleation rates-Temperature （NrT） and Precipitation-Time-Temperature （PTT） diagram. By using stress relaxation tests and fitting with Avrami equation, it is possible to draw PTT diagrams. The predictions of the model coincide with results of experimental investigation on V（C, N） precipitation in austenite. The nose temperature is around 850 ℃ obtained by experiment which is different from the prediction of the model and the difference is 30 ℃, and nitrogen has more effect on the shape of ＂C＂ curve of PTT diagram than carbon that makes ＂C＂ curve move leftward significantly.
基金Projects(11832013,51878350)supported by the National Natural Science Foundation of ChinaProject(B200201063)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(BK20180433)supported by the Natural Science Foundation of Jiangsu Province,China。
文摘To study the flexural behavior and calculation model,8 coral aggregate concrete(CAC)beams with different types of steel were designed.The flexural behavior of CAC beam was tested.The failure mode,bearing capacity,the maximum crack width(ws)and average crack spacing(lm)were studied.A calculation model for the bearing capacity of CAC beam was proposed.The results indicated that with the steel strength increased,the cracking moment(Mcr)and ultimate moment(Mu)of CAC beam increased,and the development of the ws gradually slowed,which effectively inhibited the formation of cracks and improved the flexural behavior of CAC beam.For CAC structures in the ocean engineering,it is recommended to use organic new coated steel to extend its effective service life.In addition,considering the influence of steel corrosion,a calculation model for the Mcr,Mu,lm and ws of CAC beam was established.
基金The authors are grateful for the financial supports from the National Natural Science Foundation of China(51974278)the Distinguished Young Fund of Natural Science Foundation of Hebei Province,China(E2018203446).
文摘Based on twin-roll casting, a cast-rolling force model was proposed to predict the rolling force in the bimetal solid-liquid cast-rolling bonding(SLCRB) process. The solid-liquid bonding zone was assumed to be below the kiss point(KP). The deformation resistance of the liquid zone was ignored. Then, the calculation model was derived. A 2D thermal-flow coupled simulation was established to provide a basis for the parameters in the model, and then the rolling forces of the Cu/Al clad strip at different rolling speeds were calculated. Meanwhile, through measurement experiments, the accuracy of the model was verified. The influence of the rolling speed, the substrate strip thickness, and the material on the rolling force was obtained. The results indicate that the rolling force decreases with the increase of the rolling speed and increases with the increase of the thickness and thermal conductivity of the substrate strip. The rolling force is closely related to the KP height. Therefore, the formulation of reasonable process parameters to control the KP height is of great significance to the stability of cast-rolling forming.
文摘By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.
基金Item Sponsored by National Natural Science Foundation of China(50974143)
文摘On the basis of the existing originally modified calculation models of theoretical combustion temperature（TCT）,some factors,such as the combustion ratio of pulverized coal injection（PCI）,the decomposition heat of PCI and the heat consumption of SiO2 in ash reduced in high temperature environment,were amended and improved to put forward a more comprehensive model for calculating TCT.The influences of each improvement on TCT were studied and the results were analyzed compared with those of traditional model and originally modified model,which showed that the present model could reflect the thermal state of a hearth more effectively.
基金the support of the Second Tibetan Plateau Scientific Expedition and Research Program (STEP)of China (Grant No.2019QZKK0904)the National Outstanding Youth Science Fund Project of National Natural Science Foundation of China (Grant No.51922104)+1 种基金Youth Innovation Promotion Association CASOpen Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences (Grant No.Z018014)。
文摘The unfrozen water content of rock during freezing and thawing has an important influence on its physical and mechanical properties.This study presented a model for calculating the unfrozen water content of rock during freezing and thawing process,considering the influence of unfrozen water film and rock pore structure,which can reflect the hysteresis and super-cooling effects.The pore size distribution cu rves of red sandsto ne and its unfrozen water conte nt under different temperatures during the freezing and thawing process were measured using nuclear magnetic resonance(NMR) to validate the proposed model.Comparison between the experimental and calculated results indicated that the theoretical model accu rately reflected the water content change law of red sandstone during the freezing and thawing process.Furthermore,the influences of Hamaker constant and surface relaxation parameter on the model results were examined.The results showed that the appropriate magnitude order of Hamaker constant for the red sandstone was 10J to 10J;and when the relaxation parameter of the rock surface was within 25-30 μm/ms,the calculated unfrozen water content using the proposed model was consistent with the experimental value.
基金jointly funded by the National Natural Science Foundation of China(Grant No.42201095)the Natural Science Foundation of Sichuan(Grant No.2022NSFSC1032)。
文摘The use of open-type check dams in mountainous areas has become common practice in order to mitigate the effects of debris flow and extend the service life of engineering structures.The beam dam,a common debris flow control system,has received less attention in research on the impact process of debris flow and check dams compared to solid check dams.Additionally,the estimation of impact pressure in debris flow primarily considers debris flow characteristics,without taking into account the influence of geometric characteristics of the transmission structure.To better understand the impact process of debris flow on beam dams,a series of small-scale debris flow impact tests were conducted in a model flume.Key parameters,including velocity,depth,and impact pressure,were measured.The results show that the maximum impact pressure of debris flow is affected by both the characteristics of the debris flow and the relative opening size of the beam dam.Due to flow and edge occlusion in the middle of the beam dam,the discharge of debris flow is enhanced,resulting in a longer impact process and higher maximum impact pressure.Based on these findings,a calculation model of the maximum impact pressure of debris flow at the midpoint of the middle beam is proposed,which can be used to estimate the impact of debris flow on the discharge part of the beam dam.
