From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship betw...From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship between material flow and the energy intensity is useful to save energy in steel industry. Based on the concept of standard material flow diagram, all possible situations of ferric material flow in steel manufacturing process are analyzed. The expressions of the influence of material flow deviated from standard material flow diagram on energy consumption are put forward.展开更多
This paper provides a calculating method which can be used in calculation of the kill probability attack area for every AAM. At first, attack area of AAM and kill probability of every characteristic point are obtained...This paper provides a calculating method which can be used in calculation of the kill probability attack area for every AAM. At first, attack area of AAM and kill probability of every characteristic point are obtained by combining trajectory calculation with kill probability calculation. Then, coordinates of a fire point relative to standard kill probability value in terms of standardization method are found. At last, equivalent kill probability curve equations are formulated by means of curve fitting method.展开更多
Previous results show that the floating reference theory(FRT)is an effective tool to reduce the infuence of interference factors on noninvasive blood glucose sensing by near infrared spectros-copy(NIRS).It is the key ...Previous results show that the floating reference theory(FRT)is an effective tool to reduce the infuence of interference factors on noninvasive blood glucose sensing by near infrared spectros-copy(NIRS).It is the key to measure the floating reference point(FRP)precisely for the application of FRT.Monte Carlo(MC)simulation has been introduced to quantitatively in-vestigate the effects of positioning errors and light source drifts on measuring FRP.In this article,thinning and calculating method(TCM)is proposed to quantify the positioning error.Mean-while,the normalization process(NP)is developed to significantly reduce the error induced by light source drift.The results according to TCM show that 7 purm deviations in positioning can generate about 10.63%relative error in FRP.It is more noticeable that 1%fluctuation in light source intensity may lead to 12.21%relative errors.Gratifyingly,the proposed NP model can effectively reduce the error caused by light source drift.Therefore,the measurement system for FRPs must meet that the positioning error is less than 7 purm,and the light source drift is kept within 1%.Furthermore,an improvement for measurement system is proposed in order to take advantage of the NP model.展开更多
According to Hertz theory, the difference of contact stress for non-circular gears and equivalent gears is compared in the paper, a calculating method of contact stress for non-circular gears by using equivalent gears...According to Hertz theory, the difference of contact stress for non-circular gears and equivalent gears is compared in the paper, a calculating method of contact stress for non-circular gears by using equivalent gears is researched, and computing formulas of power and rotation speed for equivalent gears are deduced. A numerical simulation of contact stress for non-circular gears has also been conducted based on the finite element method. By the comparison of fitting curves, the feasibility of using equivalent gears instead of non-circular gears to calculate the contact stress is testified.展开更多
Aimed at the demand of contingency return at any time during the near-moon phase in the manned lunar landing missions,a fast calculation method for three-impulse contingency return trajectories is proposed.Firstly,a t...Aimed at the demand of contingency return at any time during the near-moon phase in the manned lunar landing missions,a fast calculation method for three-impulse contingency return trajectories is proposed.Firstly,a three-impulse contingency return trajectory scheme is presented by combining the Lambert transfer and maneuver at the special point.Secondly,a calculation model of three-impulse contingency return trajectories is established.Then,fast calculation methods are proposed by adopting the high-order Taylor expansion of differential algebra in the twobody trajectory dynamics model and perturbed trajectory dynamics model.Finally,the performance of the proposed methods is verified by numerical simulation.The results indicate that the fast calculation method of two-body trajectory has higher calculation efficiency compared to the semi-analytical calculation method under a certain accuracy condition.Due to its high efficiency,the characteristics of the three-impulse contingency return trajectories under different contingency scenarios are further analyzed expeditiously.These findings can be used for the design of contingency return trajectories in future manned lunar landing missions.展开更多
To obtain the precise calculation method for the peak energy density and energy evolution properties of rocks subjected to uniaxial compression(UC)before the post-peak stage,particularly at s0.9sc(s denotes stress and...To obtain the precise calculation method for the peak energy density and energy evolution properties of rocks subjected to uniaxial compression(UC)before the post-peak stage,particularly at s0.9sc(s denotes stress and sc is the peak strength),extensive UC and uniaxial graded cyclical loading-unloading(GCLU)tests were performed on four rock types.In the GCLU tests,four unloading stress levels were designated when σ<0.9σc and six unloading stress levels were designated forσ≥0.9σc.The variations in the elastic energy density(ue),dissipative energy density(ud),and energy storage efficiency(C)for the four rock types under GCLU tests were analyzed.Based on the variation of ue whenσ≥0:9σc,a method for calculating the peak energy density was proposed.The energy evolution in rock under UC condition before the post-peak stage was examined.The relationship between C0.9(C atσ≥0:9σc)and mechanical behavior of rocks was explored,and the damage evolution of rock was analyzed in view of energy.Compared with that of the three existing methods,the accuracy of the calculation method of peak energy density proposed in this study is higher.These findings could provide a theoretical foundation for more accurately revealing the failure behavior of rock from an energy perspective.展开更多
The complex vibration directly affects the dynamic safety of drill string in ultra-deep wells and extra-deep wells.It is important to understand the dynamic characteristics of drill string to ensure the safety of dril...The complex vibration directly affects the dynamic safety of drill string in ultra-deep wells and extra-deep wells.It is important to understand the dynamic characteristics of drill string to ensure the safety of drill string.Due to the super slenderness ratio of drill string,strong nonlinearity implied in dynamic analysis and the complex load environment,dynamic simulation of drill string faces great challenges.At present,many simulation methods have been developed to analyze drill string dynamics,and node iteration method is one of them.The node iteration method has a unique advantage in dealing with the contact characteristics between drill string and borehole wall,but its drawback is that the calculation consumes a considerable amount of time.This paper presents a dynamic simulation method of drilling string in extra-deep well based on successive over-relaxation node iterative method(SOR node iteration method).Through theoretical analysis and numerical examples,the correctness and validity of this method were verified,and the dynamics characteristics of drill string in extra-deep wells were calculated and analyzed.The results demonstrate that,in contrast to the conventional node iteration method,the SOR node iteration method can increase the computational efficiency by 48.2%while achieving comparable results.And the whirl trajectory of the extra-deep well drill string is extremely complicated,the maximum rotational speed downhole is approximately twice the rotational speed on the ground.The dynamic torque increases rapidly at the position of the bottom stabilizer,and the lateral vibration in the middle and lower parts of drill string is relatively intense.展开更多
This article reviews the application and progress of deep learning in efficient numerical computing methods.Deep learning,as an important branch of machine learning,provides new ideas for numerical computation by cons...This article reviews the application and progress of deep learning in efficient numerical computing methods.Deep learning,as an important branch of machine learning,provides new ideas for numerical computation by constructing multi-layer neural networks to simulate the learning process of the human brain.The article explores the application of deep learning in solving partial differential equations,optimizing problems,and data-driven modeling,and analyzes its advantages in computational efficiency,accuracy,and adaptability.At the same time,this article also points out the challenges faced by deep learning numerical computation methods in terms of computational efficiency,interpretability,and generalization ability,and proposes strategies and future development directions for integrating with traditional numerical methods.展开更多
When the gas content of a coal reservoir is calculated,the reservoir pressure measured by well logging and well testing is generally used for inversion calculation instead of gas pressure.However,the calculation resul...When the gas content of a coal reservoir is calculated,the reservoir pressure measured by well logging and well testing is generally used for inversion calculation instead of gas pressure.However,the calculation result is not accurate because the reservoir pressure is not equal to the gas pressure in overpressure environments.In this paper,coal samples of different ranks in Shanxi and Henan are collected for testing the capillary pressure of coal pores.Based on the formation process of CBM reservoirs and the hydrocarbon generation and expulsion history of coal beds,the forming mechanisms of micro-pore overpressure environments in coal reservoirs were analyzed.Accordingly,a new method for calculating the gas content of coal reservoirs with consideration of a micro-pore overpressure environment was developed.And it was used to calculate the gas content of No.1 coal bed of the 2nd member of Lower Permian Shanxi Fm in the Zhongmacun Coal Mine in Jiaozuo,Henan.It is indicated that during the formation and evolution of coals,some solid organic matters were converted into gas and water,and gasewater contact is surely formed in pores.In the end,capillary pressure is generated,so the gas pressure in micro-pores is much higher than the hydrostatic column pressure,which results in a micro-pore overpressure environment.Under such an environment,gas pressure is higher than reservoir pressure,so the gas content of coal reservoirs calculated previously based on the conventional reservoir pressure evaluation are usually underestimated.It is also found that the micro-pore overpressure environment exerts a dominating effect on the CBM content calculation of 3-100 nm pores,especially that of 3-10 nm pores,but a little effect on that of pores>100 nm.In conclusion,this new method clarifies the pressure environment of CBM gas reservoirs,thereby ensuring the calculation accuracy of gas content of coal reservoirs.展开更多
A method of calculating the safety profile on the HT-7 tokamak has been described in this paper. It is derived from Maxwell's equations, among which we-mainly use .two of them: one is the magnetic field diffusion ...A method of calculating the safety profile on the HT-7 tokamak has been described in this paper. It is derived from Maxwell's equations, among which we-mainly use .two of them: one is the magnetic field diffusion equation, and the other is Ampere's Law. This method can be also used to evaluate the safety factor on other devices with a circular cross sections. It is helpful to the study of the plasma MHD behavior on the HT-7 tokamak.展开更多
Because of my carelessness,Eq.（1）in the paper "An approximate method for calculating the fluid force and response of a circular cylinder at lock-in"(China Ocean Engineering,22（3）,2008,pp.373)should be f...Because of my carelessness,Eq.（1）in the paper "An approximate method for calculating the fluid force and response of a circular cylinder at lock-in"(China Ocean Engineering,22（3）,2008,pp.373)should be f’-1.0/U’-5.0=f’;-1.0/5.75f’;-5.0,not f’=U’/5.75. My apology is hereby given.展开更多
In the present paper the analytical formulas for calculating the equivalent deterministic transients for multivariable cross correlated random processes are developed.The formulas permit the determination of the Root-...In the present paper the analytical formulas for calculating the equivalent deterministic transients for multivariable cross correlated random processes are developed.The formulas permit the determination of the Root-mean-square of the responses of a linear time-invariant system to stationary multiple random inputs in the time domain.The method is applicable in the study of flight of airplanes in atmospheric turbulence and is also useful for general engineering applications of stochastc processes control.展开更多
In this paper, the step reduction method is discussed, which was advanced by Prof. Yeh Kai-yuan for calculating a non-uniform beam with various sections. The following result is proved. The approximate solution by thi...In this paper, the step reduction method is discussed, which was advanced by Prof. Yeh Kai-yuan for calculating a non-uniform beam with various sections. The following result is proved. The approximate solution by this method approaches the true solution if the number of the steps approaches the infinity. However, the measure of the error between the limit solution and the ture solution is not in the pure mathematics sense but in the mechanics sense.展开更多
Poverty incidence is the key index that needs to be measured in the poverty exit examination and evaluation of 832 poverty-stricken counties and 128 000 poverty-stricken villages. In this paper, based on the statement...Poverty incidence is the key index that needs to be measured in the poverty exit examination and evaluation of 832 poverty-stricken counties and 128 000 poverty-stricken villages. In this paper, based on the statement of general concept and conventional calculation method of the poverty incidence, the calculation method of poverty incidence in the exit evaluation of poverty-stricken counties （also including poverty-stricken township and poverty-stricken villages） was investigated through the view of the third-party evaluation. In addition to considering the previous ＂number of planned poverty remaining population＂, the method also needed to give consideration to the exiting mistaken population, evaluation missing population. Based on the case in Yuanyang County, Honghe Hani and Yi Autonomous Prefecture, Yunnan Province, the poverty incidences of 10 exit planning villages by the end of 2017 in Yuanyang County were investigated and estimated, and suggestions were proposed to promote the precise poverty alleviation and poverty relief of the county.展开更多
There has been a growing trend in the development of offshore deep-water ports in China. For such deep sea projects, all-vertical-piled wharves are suitable structures and generally located in open waters, greatly aff...There has been a growing trend in the development of offshore deep-water ports in China. For such deep sea projects, all-vertical-piled wharves are suitable structures and generally located in open waters, greatly affected by wave action. Currently, no systematic studies or simplified numerical methods are available for deriving the dynamic characteristics and dynamic responses of all-vertical-piled wharves under wave cyclic loads. In this article, we compare the dynamic characteristics of an all-vertical-piled wharf with those of a traditional inshore high-piled wharf through numerical analysis; our research reveals that the vibration period of an all-vertical-piled wharf under cyclic loading is longer than that of an inshore high-piled wharf and is much closer to the period of the loading wave. Therefore, dynamic calculation and analysis should be conducted when designing and calculating the characteristics of an all-vertical-piled wharf. We establish a dynamic finite element model to examine the dynamic response of an all-vertical-piled wharf under wave cyclic loads and compare the results with those under wave equivalent static load; the comparison indicates that dynamic amplification of the structure is evident when the wave dynamic load effect is taken into account. Furthermore, a simplified dynamic numerical method for calculating the dynamic response of an all-vertical-piled wharf is established based on the P-Y curve. Compared with finite element analysis, the simplified method is more convenient to use and applicable to large structural deformation while considering the soil non-linearity. We confirmed that the simplified method has acceptable accuracy and can be used in engineering applications.展开更多
In order to study the calculation methods of bending behavior of Chinese reinforced concrete beams from 1912 to 1949, tests on the mechanical performance of 66 rebars from different modem Chinese concrete buildings, t...In order to study the calculation methods of bending behavior of Chinese reinforced concrete beams from 1912 to 1949, tests on the mechanical performance of 66 rebars from different modem Chinese concrete buildings, the concrete compressive strength of 12 modem Chinese concrete buildings, and the concrete cover thickness of 9 modem Chinese concrete buildings are carried out; and the actual material properties and structural conformations of modem Chinese concrete buildings are obtained. Then, the comparison on calculation methods of bending behavior including the original Chinese calculation method, the present Chinese calculation method, the present American calculation method and the present European calculation method is studied. The results show that the original Chinese calculation method of bending behavior is based on the allowable stress calculation method, and the design safety factors are 3.55 to 4. 0. In term of the calculation area of longitudinal rebars of reinforced concrete beams, without considering earthquake action, the original Chinese structural calculation method is safer than the present Chinese structural calculation method, the present European structural calculation method, and the present American structural calculation method. The results can provide support for the structural safety assessments of modem Chinese reinforced concrete buildings.展开更多
Surface notches lower the stiffness of laminated strips, so they lower the buckling loads of the laminated strips, too. In this paper a new method is proposed to predict the buckling loads of the laminated strips with...Surface notches lower the stiffness of laminated strips, so they lower the buckling loads of the laminated strips, too. In this paper a new method is proposed to predict the buckling loads of the laminated strips with a surface notch. The theoretical and experimental results show that the buckling loads decrease as the depth or width of the surface notches increase; when the stacking sequence of the laminated strips is [0°/0°/+ θ/-θ/0°/0°/+θ/-θ] s , the buckling load decrease as θ increases. It proves that the method is reliable and significant.展开更多
Energy conservation and emissions reduction in the construction industry are important steps in achieving China’s goals of peak carbon emissions by 2030 and carbon neutrality by 2060.The premise for building carbon e...Energy conservation and emissions reduction in the construction industry are important steps in achieving China’s goals of peak carbon emissions by 2030 and carbon neutrality by 2060.The premise for building carbon emission(CE)reduction is to produce accurate CE calculations.Existing calculation methods for building CEs have many problems,such as complicated calculations,large data demands,time-consuming and laborious processes,weak design orientation of results,and poor feedback on emission reduction.At the same time,the calculation of CEs during the process of architectural design faces obstacles such as uncertainty of information,incomplete data,and difficulty in obtaining a bill of quantities based on design information.To resolve these obstacles,this study,based on a designer’s vocabulary and thinking mode,describes the construction of a“design-oriented”calculation methods for building-embodied carbon emissions(ECEs).The prediction and assessment of the impact on the building environment during the architectural design process were helpful for identifying the key areas for carbon reduction,exploring potential emission reduction hotspots,and providing timely feedback for design optimization,which can have important theoretical value and practical significance in promoting the construction of low-carbon buildings.展开更多
The gravitational wave background(GWB) produced by extreme-mass-ratio inspirals(EMRIs) serves as a powerful tool for probing the astrophysical and dynamical processes in galactic centers. EMRI systems are a primary ta...The gravitational wave background(GWB) produced by extreme-mass-ratio inspirals(EMRIs) serves as a powerful tool for probing the astrophysical and dynamical processes in galactic centers. EMRI systems are a primary target for the space-based detector laser interferometer space antenna due to their long-lived signals and high signal-to-noise ratios. This study explores the statistical properties of the GWB from EMRI, focusing on the calculation methods for the GWB, the astrophysical distribution of EMRI sources, and the influence of key parameters, including the spin of supermassive black holes(SMBHs) and the masses of compact objects(COs). By analyzing these factors, we determine the distribution range of the characteristic strain of the GWB from EMRIs. We find that the final eccentricity distributions appear to have negligible effect on the intensity of the GWB due to rapid circularization before they become detectable and the spin of the SMBH enhances the gravitational wave characteristic strain by approximately 1% compared to cases without spin effects. The masses of COs can also significantly affect the characteristic strain of the GWB from EMRIs, with black hole as CO producing a gravitational wave signal intensity that is approximately one order of magnitude higher compared to cases where neutron star or white dwarf are the COs.展开更多
This study conducted shear resistance tests on steel-UHPC composite beams,focusing on structural stiffness changes during the test process,strain analysis of UHPC panels,internal reinforcement bars,steel structures,an...This study conducted shear resistance tests on steel-UHPC composite beams,focusing on structural stiffness changes during the test process,strain analysis of UHPC panels,internal reinforcement bars,steel structures,and shear connectors,as well as the failure processes and modes of UHPC panels and the structure.Through theoretical analysis,the contribution of UHPC panels to the overall vertical shear resistance capability was clarified.A shear load-bearing capacity calculation method was established,thereby considering the combined beam shear bearing capacity calculation formula of the UHPC panel and the steel beam web.展开更多
基金Item Sponsored by National Basic Research Programof China (200002600)
文摘From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship between material flow and the energy intensity is useful to save energy in steel industry. Based on the concept of standard material flow diagram, all possible situations of ferric material flow in steel manufacturing process are analyzed. The expressions of the influence of material flow deviated from standard material flow diagram on energy consumption are put forward.
文摘This paper provides a calculating method which can be used in calculation of the kill probability attack area for every AAM. At first, attack area of AAM and kill probability of every characteristic point are obtained by combining trajectory calculation with kill probability calculation. Then, coordinates of a fire point relative to standard kill probability value in terms of standardization method are found. At last, equivalent kill probability curve equations are formulated by means of curve fitting method.
基金the National High Technology Research and Development Program of China(863 Program:2012AA022602)the 111 Project(B07014)and Tianjin Natural Science Foundation(No.16JCZDJC31200).
文摘Previous results show that the floating reference theory(FRT)is an effective tool to reduce the infuence of interference factors on noninvasive blood glucose sensing by near infrared spectros-copy(NIRS).It is the key to measure the floating reference point(FRP)precisely for the application of FRT.Monte Carlo(MC)simulation has been introduced to quantitatively in-vestigate the effects of positioning errors and light source drifts on measuring FRP.In this article,thinning and calculating method(TCM)is proposed to quantify the positioning error.Mean-while,the normalization process(NP)is developed to significantly reduce the error induced by light source drift.The results according to TCM show that 7 purm deviations in positioning can generate about 10.63%relative error in FRP.It is more noticeable that 1%fluctuation in light source intensity may lead to 12.21%relative errors.Gratifyingly,the proposed NP model can effectively reduce the error caused by light source drift.Therefore,the measurement system for FRPs must meet that the positioning error is less than 7 purm,and the light source drift is kept within 1%.Furthermore,an improvement for measurement system is proposed in order to take advantage of the NP model.
文摘According to Hertz theory, the difference of contact stress for non-circular gears and equivalent gears is compared in the paper, a calculating method of contact stress for non-circular gears by using equivalent gears is researched, and computing formulas of power and rotation speed for equivalent gears are deduced. A numerical simulation of contact stress for non-circular gears has also been conducted based on the finite element method. By the comparison of fitting curves, the feasibility of using equivalent gears instead of non-circular gears to calculate the contact stress is testified.
基金co-supported by the National Natural Science Foundation of China(No.12072365)the Technology Innovation Team of Manned Space Engineering,China。
文摘Aimed at the demand of contingency return at any time during the near-moon phase in the manned lunar landing missions,a fast calculation method for three-impulse contingency return trajectories is proposed.Firstly,a three-impulse contingency return trajectory scheme is presented by combining the Lambert transfer and maneuver at the special point.Secondly,a calculation model of three-impulse contingency return trajectories is established.Then,fast calculation methods are proposed by adopting the high-order Taylor expansion of differential algebra in the twobody trajectory dynamics model and perturbed trajectory dynamics model.Finally,the performance of the proposed methods is verified by numerical simulation.The results indicate that the fast calculation method of two-body trajectory has higher calculation efficiency compared to the semi-analytical calculation method under a certain accuracy condition.Due to its high efficiency,the characteristics of the three-impulse contingency return trajectories under different contingency scenarios are further analyzed expeditiously.These findings can be used for the design of contingency return trajectories in future manned lunar landing missions.
基金the National Natural Science Foundation of China(Grant Nos.52104133 and 52304227)the Postdoctoral Foundation of Henan Province(Grant No.HN2022015)are appreciated.
文摘To obtain the precise calculation method for the peak energy density and energy evolution properties of rocks subjected to uniaxial compression(UC)before the post-peak stage,particularly at s0.9sc(s denotes stress and sc is the peak strength),extensive UC and uniaxial graded cyclical loading-unloading(GCLU)tests were performed on four rock types.In the GCLU tests,four unloading stress levels were designated when σ<0.9σc and six unloading stress levels were designated forσ≥0.9σc.The variations in the elastic energy density(ue),dissipative energy density(ud),and energy storage efficiency(C)for the four rock types under GCLU tests were analyzed.Based on the variation of ue whenσ≥0:9σc,a method for calculating the peak energy density was proposed.The energy evolution in rock under UC condition before the post-peak stage was examined.The relationship between C0.9(C atσ≥0:9σc)and mechanical behavior of rocks was explored,and the damage evolution of rock was analyzed in view of energy.Compared with that of the three existing methods,the accuracy of the calculation method of peak energy density proposed in this study is higher.These findings could provide a theoretical foundation for more accurately revealing the failure behavior of rock from an energy perspective.
基金supported by the National Natural Science Foundation of China(52174003,52374008).
文摘The complex vibration directly affects the dynamic safety of drill string in ultra-deep wells and extra-deep wells.It is important to understand the dynamic characteristics of drill string to ensure the safety of drill string.Due to the super slenderness ratio of drill string,strong nonlinearity implied in dynamic analysis and the complex load environment,dynamic simulation of drill string faces great challenges.At present,many simulation methods have been developed to analyze drill string dynamics,and node iteration method is one of them.The node iteration method has a unique advantage in dealing with the contact characteristics between drill string and borehole wall,but its drawback is that the calculation consumes a considerable amount of time.This paper presents a dynamic simulation method of drilling string in extra-deep well based on successive over-relaxation node iterative method(SOR node iteration method).Through theoretical analysis and numerical examples,the correctness and validity of this method were verified,and the dynamics characteristics of drill string in extra-deep wells were calculated and analyzed.The results demonstrate that,in contrast to the conventional node iteration method,the SOR node iteration method can increase the computational efficiency by 48.2%while achieving comparable results.And the whirl trajectory of the extra-deep well drill string is extremely complicated,the maximum rotational speed downhole is approximately twice the rotational speed on the ground.The dynamic torque increases rapidly at the position of the bottom stabilizer,and the lateral vibration in the middle and lower parts of drill string is relatively intense.
文摘This article reviews the application and progress of deep learning in efficient numerical computing methods.Deep learning,as an important branch of machine learning,provides new ideas for numerical computation by constructing multi-layer neural networks to simulate the learning process of the human brain.The article explores the application of deep learning in solving partial differential equations,optimizing problems,and data-driven modeling,and analyzes its advantages in computational efficiency,accuracy,and adaptability.At the same time,this article also points out the challenges faced by deep learning numerical computation methods in terms of computational efficiency,interpretability,and generalization ability,and proposes strategies and future development directions for integrating with traditional numerical methods.
基金supported by the National Natural Science Foundation of China(No.:41472129,41472127,41502158)Scientific and Technological Key Project for Coal Rank of Shanxi Province in 2014(No.:MQ2014-01)project supported by the CBM Joint Study Foundation of Shanxi Province(No.:2013012004).
文摘When the gas content of a coal reservoir is calculated,the reservoir pressure measured by well logging and well testing is generally used for inversion calculation instead of gas pressure.However,the calculation result is not accurate because the reservoir pressure is not equal to the gas pressure in overpressure environments.In this paper,coal samples of different ranks in Shanxi and Henan are collected for testing the capillary pressure of coal pores.Based on the formation process of CBM reservoirs and the hydrocarbon generation and expulsion history of coal beds,the forming mechanisms of micro-pore overpressure environments in coal reservoirs were analyzed.Accordingly,a new method for calculating the gas content of coal reservoirs with consideration of a micro-pore overpressure environment was developed.And it was used to calculate the gas content of No.1 coal bed of the 2nd member of Lower Permian Shanxi Fm in the Zhongmacun Coal Mine in Jiaozuo,Henan.It is indicated that during the formation and evolution of coals,some solid organic matters were converted into gas and water,and gasewater contact is surely formed in pores.In the end,capillary pressure is generated,so the gas pressure in micro-pores is much higher than the hydrostatic column pressure,which results in a micro-pore overpressure environment.Under such an environment,gas pressure is higher than reservoir pressure,so the gas content of coal reservoirs calculated previously based on the conventional reservoir pressure evaluation are usually underestimated.It is also found that the micro-pore overpressure environment exerts a dominating effect on the CBM content calculation of 3-100 nm pores,especially that of 3-10 nm pores,but a little effect on that of pores>100 nm.In conclusion,this new method clarifies the pressure environment of CBM gas reservoirs,thereby ensuring the calculation accuracy of gas content of coal reservoirs.
文摘A method of calculating the safety profile on the HT-7 tokamak has been described in this paper. It is derived from Maxwell's equations, among which we-mainly use .two of them: one is the magnetic field diffusion equation, and the other is Ampere's Law. This method can be also used to evaluate the safety factor on other devices with a circular cross sections. It is helpful to the study of the plasma MHD behavior on the HT-7 tokamak.
文摘Because of my carelessness,Eq.（1）in the paper "An approximate method for calculating the fluid force and response of a circular cylinder at lock-in"(China Ocean Engineering,22（3）,2008,pp.373)should be f’-1.0/U’-5.0=f’;-1.0/5.75f’;-5.0,not f’=U’/5.75. My apology is hereby given.
文摘In the present paper the analytical formulas for calculating the equivalent deterministic transients for multivariable cross correlated random processes are developed.The formulas permit the determination of the Root-mean-square of the responses of a linear time-invariant system to stationary multiple random inputs in the time domain.The method is applicable in the study of flight of airplanes in atmospheric turbulence and is also useful for general engineering applications of stochastc processes control.
文摘In this paper, the step reduction method is discussed, which was advanced by Prof. Yeh Kai-yuan for calculating a non-uniform beam with various sections. The following result is proved. The approximate solution by this method approaches the true solution if the number of the steps approaches the infinity. However, the measure of the error between the limit solution and the ture solution is not in the pure mathematics sense but in the mechanics sense.
文摘Poverty incidence is the key index that needs to be measured in the poverty exit examination and evaluation of 832 poverty-stricken counties and 128 000 poverty-stricken villages. In this paper, based on the statement of general concept and conventional calculation method of the poverty incidence, the calculation method of poverty incidence in the exit evaluation of poverty-stricken counties （also including poverty-stricken township and poverty-stricken villages） was investigated through the view of the third-party evaluation. In addition to considering the previous ＂number of planned poverty remaining population＂, the method also needed to give consideration to the exiting mistaken population, evaluation missing population. Based on the case in Yuanyang County, Honghe Hani and Yi Autonomous Prefecture, Yunnan Province, the poverty incidences of 10 exit planning villages by the end of 2017 in Yuanyang County were investigated and estimated, and suggestions were proposed to promote the precise poverty alleviation and poverty relief of the county.
基金financially supported by the Major Science and Technology Project of MOT,China(Grant Nos.2013 328 224 070 and 2014 328 224 040)the National Natural Science Foundation of China(Grant No.51409134)
文摘There has been a growing trend in the development of offshore deep-water ports in China. For such deep sea projects, all-vertical-piled wharves are suitable structures and generally located in open waters, greatly affected by wave action. Currently, no systematic studies or simplified numerical methods are available for deriving the dynamic characteristics and dynamic responses of all-vertical-piled wharves under wave cyclic loads. In this article, we compare the dynamic characteristics of an all-vertical-piled wharf with those of a traditional inshore high-piled wharf through numerical analysis; our research reveals that the vibration period of an all-vertical-piled wharf under cyclic loading is longer than that of an inshore high-piled wharf and is much closer to the period of the loading wave. Therefore, dynamic calculation and analysis should be conducted when designing and calculating the characteristics of an all-vertical-piled wharf. We establish a dynamic finite element model to examine the dynamic response of an all-vertical-piled wharf under wave cyclic loads and compare the results with those under wave equivalent static load; the comparison indicates that dynamic amplification of the structure is evident when the wave dynamic load effect is taken into account. Furthermore, a simplified dynamic numerical method for calculating the dynamic response of an all-vertical-piled wharf is established based on the P-Y curve. Compared with finite element analysis, the simplified method is more convenient to use and applicable to large structural deformation while considering the soil non-linearity. We confirmed that the simplified method has acceptable accuracy and can be used in engineering applications.
基金The National Natural Science Foundation of China(No.51138002)the Foundation for the Author of National Excellent Doctoral Dissertation of PR China(No.201452)the Open Fund of Shanghai Key Laboratory of Engineering Structure Safety(No.2015-KF06)
文摘In order to study the calculation methods of bending behavior of Chinese reinforced concrete beams from 1912 to 1949, tests on the mechanical performance of 66 rebars from different modem Chinese concrete buildings, the concrete compressive strength of 12 modem Chinese concrete buildings, and the concrete cover thickness of 9 modem Chinese concrete buildings are carried out; and the actual material properties and structural conformations of modem Chinese concrete buildings are obtained. Then, the comparison on calculation methods of bending behavior including the original Chinese calculation method, the present Chinese calculation method, the present American calculation method and the present European calculation method is studied. The results show that the original Chinese calculation method of bending behavior is based on the allowable stress calculation method, and the design safety factors are 3.55 to 4. 0. In term of the calculation area of longitudinal rebars of reinforced concrete beams, without considering earthquake action, the original Chinese structural calculation method is safer than the present Chinese structural calculation method, the present European structural calculation method, and the present American structural calculation method. The results can provide support for the structural safety assessments of modem Chinese reinforced concrete buildings.
文摘Surface notches lower the stiffness of laminated strips, so they lower the buckling loads of the laminated strips, too. In this paper a new method is proposed to predict the buckling loads of the laminated strips with a surface notch. The theoretical and experimental results show that the buckling loads decrease as the depth or width of the surface notches increase; when the stacking sequence of the laminated strips is [0°/0°/+ θ/-θ/0°/0°/+θ/-θ] s , the buckling load decrease as θ increases. It proves that the method is reliable and significant.
基金supported by the National Key Research and Development Program of China(2022YFC3802701)the Key Research and Development Program of Shaanxi Province of China(2023-ZDLSF-66).
文摘Energy conservation and emissions reduction in the construction industry are important steps in achieving China’s goals of peak carbon emissions by 2030 and carbon neutrality by 2060.The premise for building carbon emission(CE)reduction is to produce accurate CE calculations.Existing calculation methods for building CEs have many problems,such as complicated calculations,large data demands,time-consuming and laborious processes,weak design orientation of results,and poor feedback on emission reduction.At the same time,the calculation of CEs during the process of architectural design faces obstacles such as uncertainty of information,incomplete data,and difficulty in obtaining a bill of quantities based on design information.To resolve these obstacles,this study,based on a designer’s vocabulary and thinking mode,describes the construction of a“design-oriented”calculation methods for building-embodied carbon emissions(ECEs).The prediction and assessment of the impact on the building environment during the architectural design process were helpful for identifying the key areas for carbon reduction,exploring potential emission reduction hotspots,and providing timely feedback for design optimization,which can have important theoretical value and practical significance in promoting the construction of low-carbon buildings.
基金supported by the National Key R&D Program of China (Grant No. 2020YFC2201400)。
文摘The gravitational wave background(GWB) produced by extreme-mass-ratio inspirals(EMRIs) serves as a powerful tool for probing the astrophysical and dynamical processes in galactic centers. EMRI systems are a primary target for the space-based detector laser interferometer space antenna due to their long-lived signals and high signal-to-noise ratios. This study explores the statistical properties of the GWB from EMRI, focusing on the calculation methods for the GWB, the astrophysical distribution of EMRI sources, and the influence of key parameters, including the spin of supermassive black holes(SMBHs) and the masses of compact objects(COs). By analyzing these factors, we determine the distribution range of the characteristic strain of the GWB from EMRIs. We find that the final eccentricity distributions appear to have negligible effect on the intensity of the GWB due to rapid circularization before they become detectable and the spin of the SMBH enhances the gravitational wave characteristic strain by approximately 1% compared to cases without spin effects. The masses of COs can also significantly affect the characteristic strain of the GWB from EMRIs, with black hole as CO producing a gravitational wave signal intensity that is approximately one order of magnitude higher compared to cases where neutron star or white dwarf are the COs.
文摘This study conducted shear resistance tests on steel-UHPC composite beams,focusing on structural stiffness changes during the test process,strain analysis of UHPC panels,internal reinforcement bars,steel structures,and shear connectors,as well as the failure processes and modes of UHPC panels and the structure.Through theoretical analysis,the contribution of UHPC panels to the overall vertical shear resistance capability was clarified.A shear load-bearing capacity calculation method was established,thereby considering the combined beam shear bearing capacity calculation formula of the UHPC panel and the steel beam web.
