Point source CO_(2) capture(PSCC)is crucial for decarbonizing various industrial sectors,while direct air capture(DAC)holds promise for removing CO_(2) directly from the air.Sorbents play a critical role in both techn...Point source CO_(2) capture(PSCC)is crucial for decarbonizing various industrial sectors,while direct air capture(DAC)holds promise for removing CO_(2) directly from the air.Sorbents play a critical role in both technologies,with their performances,efficiency,cost,etc.,largely depending on which type is used(physical or chemical).Solid amine sorbents(SAS)employed in the chemical adsorption of CO_(2) are suitable for both PSCC and DAC.SAS offer significant advantages over liquid amines such as monoethanolamine(MEA),due to their ability to perform cyclic adsorption–desorption with much lower energy requirement.The environmental concern associated with MEA can be mitigated by SAS.Support materials have a significantly important role in stabilizing amine and enhancing stability and kinetics;varieties of support materials have been screened at a laboratory scale.One promising support material is a silica gel(SG),which is commercially available and attractive for designing cost-effective sorbents for large-scale CO_(2) capture.Various impregnation methods such as physical adsorption and covalent functionalization have been employed to functionalize silica surfaces with amines.This review provided a comprehensive critical analysis of SG-based SAS for CO_(2) capture.We discussed and evaluated them in terms of their adsorption capacity,adsorption,and desorption conditions,and the kinetics involved in these processes.Finally,we proposed a few recommendations for further development of low-cost,lower carbon footprint SAS for large-scale deployment of CO_(2) capture technology.展开更多
The H2S removal characteristics of Taxada lime tinder the high temperature of 600-900℃ have been investigated. The test results indicated that this kind of sorbent almost was inert to H2S When temperature lowered dow...The H2S removal characteristics of Taxada lime tinder the high temperature of 600-900℃ have been investigated. The test results indicated that this kind of sorbent almost was inert to H2S When temperature lowered down to 600℃,while its reactivity increased with increased temperature and the equilibrium conversion reached up to over 60% at temperatLlre of 900℃.However, side reactions of H2S in conjunction with high-temperature decomposition and mineral catalysis to elemental sulfur and sulfur dioxide were testified.展开更多
A kind of industrial solid waste, i.e., carbide slag, was used as CaO precursor to synthesize CO2 sorbent. The highly reactive synthetic sorbent was prepared from carbide slag, aluminum nitrate hydrate and glycerol wa...A kind of industrial solid waste, i.e., carbide slag, was used as CaO precursor to synthesize CO2 sorbent. The highly reactive synthetic sorbent was prepared from carbide slag, aluminum nitrate hydrate and glycerol water solution by the combustion synthesis method. The results show that the synthetic sorbent exhibits a much higher CO2 capture capacity compared with carbide slag. The CO2 capture capacity and the carbonation conversion of the synthetic sorbent are 0. 38 g/g and 0. 70 after 50 cycles, which are 1.8 and 2. 1 times those of carbide slag. The average carbonation conversion and the CO2 capture efficiency of the synthetic sorbent are higher than those of carbide slag with the same sorbent flow ratios. The required sorbent flow ratios are lower for synthetic sorbent to achieve the same CO2 capture efficiency compared with carbide slag. With the same sorbent flow ratio and CO2 capture efficiency, the energy requirement in calciner for the synthetic sorbent is less than that for carbide slag.展开更多
NF_(3)is commonly used as an etching and cleaning gas in semiconductor industry,however it is a strongly greenhouse gas.Therefore,the destruction of disposal NF_(3)is an urgent task to migrate the greenhouse effect.Am...NF_(3)is commonly used as an etching and cleaning gas in semiconductor industry,however it is a strongly greenhouse gas.Therefore,the destruction of disposal NF_(3)is an urgent task to migrate the greenhouse effect.Among the technologies for NF_(3)abatement,the destructive sorption of NF_(3)over metal oxides sorbents is an effective way.Thus,the search for a highly reactive and utilized sorbent for NF_(3)destruction is in great demand.In this work,AlOOH supported on carbon-sphere(AlOOH/CS)as precursors were synthesized hydrothermally and heat-treated to prepare the Al_(2)O_(3)sorbents.The influence of AlOOH/CS hydrothermal temperatures on the reactivity of derived Al_(2)O_(3)sorbents for NF_(3)destruction was investigated,and it is shown that the Al2O3 from AlOOH/CS hydro-thermalized at 120℃is superior to others.Subsequently,the optimized Al_(2)O_(3)was covered by Mn(OH)x to prepare Mn/Al_(2)O_(3)sorbents via changing hydrothermal temperatures and Mn loadings.The results show that the Mn/Al_(2)O_(3)sorbents are more utilized than bare Al_(2)O_(3)in NF_(3)destructive sorption due to the promotional effect of Mn_(2)O_(3)as surface layer on the fluorination of Al_(2)O_(3)as substrate,especially the optimal 5%Mn/Al2O3(160℃)exhibits a utilization percentage as high as 90.4%,and remarkably exceeds all the sorbents reported so far.These findings are beneficial to develop more efficient sorbents for the destruction of NF_(3).展开更多
CaO-based sorbent is considered to be a promising candidate for capturing CO_2 at high temperature. However,the adsorption capacity of CaO decreases sharply with the increase of the carbonation/calcination cycles. In ...CaO-based sorbent is considered to be a promising candidate for capturing CO_2 at high temperature. However,the adsorption capacity of CaO decreases sharply with the increase of the carbonation/calcination cycles. In this study, CaO was derived from calcium acetate(CaAc_2), which was doped with different elements(Mg, Al,Ce, Zr and La) to improve the cyclic stability. The carbonation conversion and cyclic stability of sorbents were tested by thermogravimetric analyzer(TGA). The sorbents were characterized by N_2 isothermal adsorption measurements, scanning electron microscopy(SEM) and X-ray diffraction(XRD). The results showed that the cyclic stabilities of all modified sorbents were improved by doping elements, while the carbonation conversions of sorbents in the 1st cycle were not increased by doping different elements. After 22 cycles, the cyclic stabilities of CaO–Al, CaO–Ce and CaO–La were above 96.2%. After 110 cycles, the cyclic stability of CaO–Al was still as high as 87.1%. Furthermore, the carbonation conversion was closely related to the critical time and specific surface area.展开更多
Supported ionic liquid(IL) sorbents for CO_2 capture were prepared by impregnating tetramethylammonium glycinate([N1111][Gly]) into four types of porous materials in this study. The CO_2 adsorption behavior was invest...Supported ionic liquid(IL) sorbents for CO_2 capture were prepared by impregnating tetramethylammonium glycinate([N1111][Gly]) into four types of porous materials in this study. The CO_2 adsorption behavior was investigated in a thermogravimetric analyzer(TGA). Among them, poly(methyl methacrylate)(PMMA)-[N1111][Gly]exhibits the best CO_2 adsorption properties in terms of adsorption capacity and rate. The CO_2 adsorption capacity reaches up to 2.14 mmol·g-1 sorbent at 35 °C. The fast CO_2 adsorption rate of PMMA-[N1111][Gly] allows 60 min of adsorption equilibrium time at 35 °C and much shorter time of 4 min is achieved at 75 °C. Further, Avrami's fractional-order kinetic model was used and fitted well with the experiment data, which shows good consistency between experimental results and theoretical model. In addition, PMMA-[N1111][Gly] remained excellent durability in the continuous adsorption–desorption cycling test. Therefore, this stable PMMA-[N1111][Gly] sorbent has great potential to be used for fast CO_2 adsorption from flue-gas.展开更多
Abstract： Two Canadian limestones with different properties were tested to determine the effect of SO2 during the carbonation of sorbent on the CO2 capture performance in Ca- looping. When the reaction gas is mixed w...Abstract： Two Canadian limestones with different properties were tested to determine the effect of SO2 during the carbonation of sorbent on the CO2 capture performance in Ca- looping. When the reaction gas is mixed with SO2, the carbonation ratio of the sorbent is always lower than that without SO2 for each cycle under the same conditions, and the sulfation ratio increases almost linearly with the increase in the cycle times. At 650 ℃, there is little difference in the carbonation ratio of the sorbent during the first four cycles for the two carbonation time, 5 and 10 rain at 0. 18% SO2. The indirect sulfation reaction that occurs simultaneously with the carbonation of CaO is responsible for the degradation of the sorbent for CO2 capture, and the carbonation duration is not the main factor that affects the ability of the sorbent. 680℃ is the best carbonation temperature among the three tested temperatures and the highest carbonation ratio can be obtained. Also, the sulfation ratio is the highest. The probable cause is the different effects of temperature on the carbonation rate and sulfation rate. A higher SO2 concentration will decrease the carbonation ratio clearly, but the decrease in the carbonation capability of the sorbent is not proportional to the increase of the SO2 concentration in flue gases.展开更多
Under the Paris agreement, China has committed to reducing CO_2 emissions by 60%–65% per unit of GDP by 2030.Since CO_2 emissions from coal-fired power plants currently account for over 30% of the total carbon emissi...Under the Paris agreement, China has committed to reducing CO_2 emissions by 60%–65% per unit of GDP by 2030.Since CO_2 emissions from coal-fired power plants currently account for over 30% of the total carbon emissions in China, it will be necessary to mitigate at least some of these emissions to achieve this goal. Studies by the International Energy Agency(IEA) indicate CCS technology has the potential to contribute 14% of global emission reductions, followed by 40% of higher energy efficiency and 35% of renewable energy, which is considered as the most promising technology to significantly reduce carbon emissions for current coal-fired power plants.Moreover, the announcement of a Chinese national carbon trading market in late 2017 signals an opportunity for the commercial deployment of CO_2 capture technologies.Currently, the only commercially demonstrated technology for post-combustion CO_2 capture technology from power plants is solvent-based absorption. While commercially viable, the costs of deploying this technology are high. This has motivated efforts to develop more affordable alternatives, including advanced solvents, membranes,and sorbent capture systems. Of these approaches, advanced solvents have received the most attention in terms of research and demonstration. In contrast, sorbent capture technology has less attention, despite its potential for much lower energy consumption due to the absence of water in the sorbent. This paper reviews recent progress in the development of sorbent materials modified by amine functionalities with an emphasis on material characterization methods and the effects of operating conditions on performance. The main problems and challenges that need to be overcome to improve the competitiveness of sorbent-based capture technologies are discussed.展开更多
A new industrial S Zorb sorbent(Ni/Zn O-P) was prepared by using the spray drying technique. The other two traditional sorbents(Ni/Zn O-M and Ni/Zn O-H) were prepared in exactly the same way except the use of differen...A new industrial S Zorb sorbent(Ni/Zn O-P) was prepared by using the spray drying technique. The other two traditional sorbents(Ni/Zn O-M and Ni/Zn O-H) were prepared in exactly the same way except the use of different silica-alumina binder matrices. The XRD, Rietveld quantitative phase analysis, BET, and laser particle size analysis were employed to characterize their physico-chemical properties. The deactivation mechanism and desulfurization kinetics of sorbent was investigated on a water vapor aging treatment device. It was shown that both the water vapor pressure and reaction temperature significantly could influence the formation rate of inactive Zn2 Si O4, which could decrease the sulfur storage capacity of sorbents. The Zn2 Si O4 content profiles could be fitted into the zero order equation, from which the apparent rate constant k and the activation energy E a were calculated. The matrix P greatly raised the E a of Zn2 Si O4 formation due to the less bridged hydroxyl silanol groups on its surface, which accounted for the high stability of Ni/Zn O-P. The desulfurization performance of the fresh and aged sorbents showed that the overall average sulfur conversion of Ni/Zn O-P(aged) was 92%, which was close to that of fresh sorbents(95%), and was higher than that of Ni/Zn O-M(aged)(86%) and Ni/Zn O-H(aged)(90%). Based on these findings, the application of Ni/Zn O-P can greatly improve the long-term running stability of the industrial unit.展开更多
The objective of this work is to study the influences of silica supports and PEG additive on the sorption performance of molecular basket sorbent（MBS） for COcapture consisting of polyethylenimine and one of the foll...The objective of this work is to study the influences of silica supports and PEG additive on the sorption performance of molecular basket sorbent（MBS） for COcapture consisting of polyethylenimine and one of the following supports: SBA-15（2-D structure）, TUD-1（3-D sponge-like structure） and fumed silica HS-5（3-D disordered structure）. Effects of the supports regarding pore structures and pore properties, the PEI loading amount as well as the sorption temperature were examined. Furthermore, polyethylene glycol（PEG） was introduced as an additive into the sorbents and its effect was investigated at different PEI loadings and sorption temperatures. The results suggest that the pore properties of MBS（after PEI loading） play a more important role in the COsorption capacity, rather than those of the supports alone.MBS with 3D pore structure exhibits higher COsorption capacity and amine efficiency than those with 2D-structured support. Among the sorbents studied, fumed silica（HS-5） based MBS showed the highest COsorption capacity in the temperature range of 30-95 °C, probably due to its unique interstitial pores formed by the aggregation of polymer-loaded SiOparticles. It was found that the temperature dependence is directly related to the PEI surface coverage layers. The more PEI surface coverage layers, the higher diffusion barrier for COand the stronger temperature dependence of COcapacity. 3D MBS exceeds 2D MBS at the same PEI coverage layers due to lower diffusion barrier. Adding PEG can significantly enhance the COsorption capacity and improve amine efficiency of all MBS, most likely by alleviating the diffusion barrier within PEI bulk layers through the inter-molecular interaction between PEI and PEG.展开更多
High-temperature pyrolysis technology can effectively solve the problem of municipal solid waste pollution.However,the pyrolysis gas contains a large amount of CO_(2),which would adversely affect the subsequent utiliz...High-temperature pyrolysis technology can effectively solve the problem of municipal solid waste pollution.However,the pyrolysis gas contains a large amount of CO_(2),which would adversely affect the subsequent utilization.To address this problem,a novel method of co-precipitation modification with Ca,Mg and Zr metals was proposed to improve the CO_(2)capture performance.X-ray diffraction(XRD)patterns and energy dispersive X-ray spectroscopy analysis showed that the two inert supports MgO and CaZrO_(3)were uniformly distributed in the modified calcium-based sorbents.In addition,the XRD results indicated that CaZrO_(3)was produced by the reaction of ZrO_(2)and CaO at high temperatures.The effects of doping ratios,adsorption temperature,calcination temperature,CO_(2)concentration and calcination atmosphere on the adsorption capacity and cycle stability of the modified calcium-based sorbent were studied.The modified calcium-based sorbent achieved the best CO_(2)capture performance when the doping ratio was 10:1:1 with carbonation at 700℃ under 20%CO_(2)/80%N_(2)atmosphere and calcination at 900℃ under100%N_(2)atmosphere.After ten cycles,the average carbonation conversion rate of Ca-10 sorbent was 72%.Finally,the modified calcium-based sorbents successfully reduced the CO_(2)concentration of the pyrolysis gas from 37%to 5%.展开更多
低浓度煤层气的提质利用对缓解国内天然气不足的现状具有重要意义,然而煤层气中存在的氮气杂质限制了该类资源的进一步应用,进行低浓度煤层气中CH_(4)/N_(2)混合物的分离至关重要。制备了两种具有弱极性超微孔的金属有机框架材料Sc-CPM-...低浓度煤层气的提质利用对缓解国内天然气不足的现状具有重要意义,然而煤层气中存在的氮气杂质限制了该类资源的进一步应用,进行低浓度煤层气中CH_(4)/N_(2)混合物的分离至关重要。制备了两种具有弱极性超微孔的金属有机框架材料Sc-CPM-66A和In-CPM-66A,研究材料从CH_(4)/N_(2)混合物中富集CH_(4)的性能,利用PXRD、77 K N_(2)吸附、TGA和FTIR光谱对材料的结构进行了表征。IAST选择性计算表明,In-CPM-66A和Sc-CPM-66A的CH_(4)/N_(2)选择性达到6.0。受益于材料表面存在的大量的甲基基团,两种材料对CH_(4)的吸附热低于被报道的大部分材料,材料与甲烷分子之间弱的相互作用有利于吸附剂的脱附再生。穿透实验进一步表明,CPM-66A可以实现动态条件下CH_(4)/N_(2)混合物的分离,循环穿透实验显示该类材料具有良好的可重复性。展开更多
基金financial support from Business Finland 8205/31/2022the Magnus Ehrnrooth Foundation for financial support.
文摘Point source CO_(2) capture(PSCC)is crucial for decarbonizing various industrial sectors,while direct air capture(DAC)holds promise for removing CO_(2) directly from the air.Sorbents play a critical role in both technologies,with their performances,efficiency,cost,etc.,largely depending on which type is used(physical or chemical).Solid amine sorbents(SAS)employed in the chemical adsorption of CO_(2) are suitable for both PSCC and DAC.SAS offer significant advantages over liquid amines such as monoethanolamine(MEA),due to their ability to perform cyclic adsorption–desorption with much lower energy requirement.The environmental concern associated with MEA can be mitigated by SAS.Support materials have a significantly important role in stabilizing amine and enhancing stability and kinetics;varieties of support materials have been screened at a laboratory scale.One promising support material is a silica gel(SG),which is commercially available and attractive for designing cost-effective sorbents for large-scale CO_(2) capture.Various impregnation methods such as physical adsorption and covalent functionalization have been employed to functionalize silica surfaces with amines.This review provided a comprehensive critical analysis of SG-based SAS for CO_(2) capture.We discussed and evaluated them in terms of their adsorption capacity,adsorption,and desorption conditions,and the kinetics involved in these processes.Finally,we proposed a few recommendations for further development of low-cost,lower carbon footprint SAS for large-scale deployment of CO_(2) capture technology.
文摘The H2S removal characteristics of Taxada lime tinder the high temperature of 600-900℃ have been investigated. The test results indicated that this kind of sorbent almost was inert to H2S When temperature lowered down to 600℃,while its reactivity increased with increased temperature and the equilibrium conversion reached up to over 60% at temperatLlre of 900℃.However, side reactions of H2S in conjunction with high-temperature decomposition and mineral catalysis to elemental sulfur and sulfur dioxide were testified.
基金The National Natural Science Foundation of China(No.51376003)
文摘A kind of industrial solid waste, i.e., carbide slag, was used as CaO precursor to synthesize CO2 sorbent. The highly reactive synthetic sorbent was prepared from carbide slag, aluminum nitrate hydrate and glycerol water solution by the combustion synthesis method. The results show that the synthetic sorbent exhibits a much higher CO2 capture capacity compared with carbide slag. The CO2 capture capacity and the carbonation conversion of the synthetic sorbent are 0. 38 g/g and 0. 70 after 50 cycles, which are 1.8 and 2. 1 times those of carbide slag. The average carbonation conversion and the CO2 capture efficiency of the synthetic sorbent are higher than those of carbide slag with the same sorbent flow ratios. The required sorbent flow ratios are lower for synthetic sorbent to achieve the same CO2 capture efficiency compared with carbide slag. With the same sorbent flow ratio and CO2 capture efficiency, the energy requirement in calciner for the synthetic sorbent is less than that for carbide slag.
基金The financial support from the Natural Science Foundation of Shandong Province (ZR2020KB003)
文摘NF_(3)is commonly used as an etching and cleaning gas in semiconductor industry,however it is a strongly greenhouse gas.Therefore,the destruction of disposal NF_(3)is an urgent task to migrate the greenhouse effect.Among the technologies for NF_(3)abatement,the destructive sorption of NF_(3)over metal oxides sorbents is an effective way.Thus,the search for a highly reactive and utilized sorbent for NF_(3)destruction is in great demand.In this work,AlOOH supported on carbon-sphere(AlOOH/CS)as precursors were synthesized hydrothermally and heat-treated to prepare the Al_(2)O_(3)sorbents.The influence of AlOOH/CS hydrothermal temperatures on the reactivity of derived Al_(2)O_(3)sorbents for NF_(3)destruction was investigated,and it is shown that the Al2O3 from AlOOH/CS hydro-thermalized at 120℃is superior to others.Subsequently,the optimized Al_(2)O_(3)was covered by Mn(OH)x to prepare Mn/Al_(2)O_(3)sorbents via changing hydrothermal temperatures and Mn loadings.The results show that the Mn/Al_(2)O_(3)sorbents are more utilized than bare Al_(2)O_(3)in NF_(3)destructive sorption due to the promotional effect of Mn_(2)O_(3)as surface layer on the fluorination of Al_(2)O_(3)as substrate,especially the optimal 5%Mn/Al2O3(160℃)exhibits a utilization percentage as high as 90.4%,and remarkably exceeds all the sorbents reported so far.These findings are beneficial to develop more efficient sorbents for the destruction of NF_(3).
基金Supported by Capture CO_2 and Storage Technology Jointly Studied by USA and China(2013DFB60140-04)Northwest University Graduate Innovative Talent Training Project(YZZ12036)
文摘CaO-based sorbent is considered to be a promising candidate for capturing CO_2 at high temperature. However,the adsorption capacity of CaO decreases sharply with the increase of the carbonation/calcination cycles. In this study, CaO was derived from calcium acetate(CaAc_2), which was doped with different elements(Mg, Al,Ce, Zr and La) to improve the cyclic stability. The carbonation conversion and cyclic stability of sorbents were tested by thermogravimetric analyzer(TGA). The sorbents were characterized by N_2 isothermal adsorption measurements, scanning electron microscopy(SEM) and X-ray diffraction(XRD). The results showed that the cyclic stabilities of all modified sorbents were improved by doping elements, while the carbonation conversions of sorbents in the 1st cycle were not increased by doping different elements. After 22 cycles, the cyclic stabilities of CaO–Al, CaO–Ce and CaO–La were above 96.2%. After 110 cycles, the cyclic stability of CaO–Al was still as high as 87.1%. Furthermore, the carbonation conversion was closely related to the critical time and specific surface area.
基金Supported by the National Basic Research Program of China(2013CB733503)the National Natural Science Foundation of China(21136001,21136004,21476106,21428601,21776123)the Top-notch Academic Programs Project of Jiangsu Higher Education Institutions(TAPP)and the Jiangsu Natural Science Foundation(BK20130062)
文摘Supported ionic liquid(IL) sorbents for CO_2 capture were prepared by impregnating tetramethylammonium glycinate([N1111][Gly]) into four types of porous materials in this study. The CO_2 adsorption behavior was investigated in a thermogravimetric analyzer(TGA). Among them, poly(methyl methacrylate)(PMMA)-[N1111][Gly]exhibits the best CO_2 adsorption properties in terms of adsorption capacity and rate. The CO_2 adsorption capacity reaches up to 2.14 mmol·g-1 sorbent at 35 °C. The fast CO_2 adsorption rate of PMMA-[N1111][Gly] allows 60 min of adsorption equilibrium time at 35 °C and much shorter time of 4 min is achieved at 75 °C. Further, Avrami's fractional-order kinetic model was used and fitted well with the experiment data, which shows good consistency between experimental results and theoretical model. In addition, PMMA-[N1111][Gly] remained excellent durability in the continuous adsorption–desorption cycling test. Therefore, this stable PMMA-[N1111][Gly] sorbent has great potential to be used for fast CO_2 adsorption from flue-gas.
基金The National Natural Science Foundation of China(No.51276064)the Natural Science Foundation of Beijing City(No.3132028)
文摘Abstract： Two Canadian limestones with different properties were tested to determine the effect of SO2 during the carbonation of sorbent on the CO2 capture performance in Ca- looping. When the reaction gas is mixed with SO2, the carbonation ratio of the sorbent is always lower than that without SO2 for each cycle under the same conditions, and the sulfation ratio increases almost linearly with the increase in the cycle times. At 650 ℃, there is little difference in the carbonation ratio of the sorbent during the first four cycles for the two carbonation time, 5 and 10 rain at 0. 18% SO2. The indirect sulfation reaction that occurs simultaneously with the carbonation of CaO is responsible for the degradation of the sorbent for CO2 capture, and the carbonation duration is not the main factor that affects the ability of the sorbent. 680℃ is the best carbonation temperature among the three tested temperatures and the highest carbonation ratio can be obtained. Also, the sulfation ratio is the highest. The probable cause is the different effects of temperature on the carbonation rate and sulfation rate. A higher SO2 concentration will decrease the carbonation ratio clearly, but the decrease in the carbonation capability of the sorbent is not proportional to the increase of the SO2 concentration in flue gases.
基金Supported by the National Key Research and Development Program of China(2017YFB0603301)
文摘Under the Paris agreement, China has committed to reducing CO_2 emissions by 60%–65% per unit of GDP by 2030.Since CO_2 emissions from coal-fired power plants currently account for over 30% of the total carbon emissions in China, it will be necessary to mitigate at least some of these emissions to achieve this goal. Studies by the International Energy Agency(IEA) indicate CCS technology has the potential to contribute 14% of global emission reductions, followed by 40% of higher energy efficiency and 35% of renewable energy, which is considered as the most promising technology to significantly reduce carbon emissions for current coal-fired power plants.Moreover, the announcement of a Chinese national carbon trading market in late 2017 signals an opportunity for the commercial deployment of CO_2 capture technologies.Currently, the only commercially demonstrated technology for post-combustion CO_2 capture technology from power plants is solvent-based absorption. While commercially viable, the costs of deploying this technology are high. This has motivated efforts to develop more affordable alternatives, including advanced solvents, membranes,and sorbent capture systems. Of these approaches, advanced solvents have received the most attention in terms of research and demonstration. In contrast, sorbent capture technology has less attention, despite its potential for much lower energy consumption due to the absence of water in the sorbent. This paper reviews recent progress in the development of sorbent materials modified by amine functionalities with an emphasis on material characterization methods and the effects of operating conditions on performance. The main problems and challenges that need to be overcome to improve the competitiveness of sorbent-based capture technologies are discussed.
基金supported by the Science and Technology Development projects of SINOPEC, China (Nos. 113138, 112008 and 110099)
文摘A new industrial S Zorb sorbent(Ni/Zn O-P) was prepared by using the spray drying technique. The other two traditional sorbents(Ni/Zn O-M and Ni/Zn O-H) were prepared in exactly the same way except the use of different silica-alumina binder matrices. The XRD, Rietveld quantitative phase analysis, BET, and laser particle size analysis were employed to characterize their physico-chemical properties. The deactivation mechanism and desulfurization kinetics of sorbent was investigated on a water vapor aging treatment device. It was shown that both the water vapor pressure and reaction temperature significantly could influence the formation rate of inactive Zn2 Si O4, which could decrease the sulfur storage capacity of sorbents. The Zn2 Si O4 content profiles could be fitted into the zero order equation, from which the apparent rate constant k and the activation energy E a were calculated. The matrix P greatly raised the E a of Zn2 Si O4 formation due to the less bridged hydroxyl silanol groups on its surface, which accounted for the high stability of Ni/Zn O-P. The desulfurization performance of the fresh and aged sorbents showed that the overall average sulfur conversion of Ni/Zn O-P(aged) was 92%, which was close to that of fresh sorbents(95%), and was higher than that of Ni/Zn O-M(aged)(86%) and Ni/Zn O-H(aged)(90%). Based on these findings, the application of Ni/Zn O-P can greatly improve the long-term running stability of the industrial unit.
基金the support of this work at Penn State by the U.S.Department of Energy,National Energy Technology Laboratorythe financial support by the China Scholarship Council,the Natural Science Foundation of China(No.51176034)the Open Fund of Key Laboratory of Coal-Based CO2 Capture and Geological Storage of Jiangsu Province(2016A05)
文摘The objective of this work is to study the influences of silica supports and PEG additive on the sorption performance of molecular basket sorbent（MBS） for COcapture consisting of polyethylenimine and one of the following supports: SBA-15（2-D structure）, TUD-1（3-D sponge-like structure） and fumed silica HS-5（3-D disordered structure）. Effects of the supports regarding pore structures and pore properties, the PEI loading amount as well as the sorption temperature were examined. Furthermore, polyethylene glycol（PEG） was introduced as an additive into the sorbents and its effect was investigated at different PEI loadings and sorption temperatures. The results suggest that the pore properties of MBS（after PEI loading） play a more important role in the COsorption capacity, rather than those of the supports alone.MBS with 3D pore structure exhibits higher COsorption capacity and amine efficiency than those with 2D-structured support. Among the sorbents studied, fumed silica（HS-5） based MBS showed the highest COsorption capacity in the temperature range of 30-95 °C, probably due to its unique interstitial pores formed by the aggregation of polymer-loaded SiOparticles. It was found that the temperature dependence is directly related to the PEI surface coverage layers. The more PEI surface coverage layers, the higher diffusion barrier for COand the stronger temperature dependence of COcapacity. 3D MBS exceeds 2D MBS at the same PEI coverage layers due to lower diffusion barrier. Adding PEG can significantly enhance the COsorption capacity and improve amine efficiency of all MBS, most likely by alleviating the diffusion barrier within PEI bulk layers through the inter-molecular interaction between PEI and PEG.
基金the support given by the National Key Research and Development Program of China(2018YFC1901203)Natural Science Foundation of Guangdong Province,China(2021A1515010497)+1 种基金Guangzhou Science and Technology Innovation Development Special FundFundamental Research Funds for the Central Universities(2019MS017)。
文摘High-temperature pyrolysis technology can effectively solve the problem of municipal solid waste pollution.However,the pyrolysis gas contains a large amount of CO_(2),which would adversely affect the subsequent utilization.To address this problem,a novel method of co-precipitation modification with Ca,Mg and Zr metals was proposed to improve the CO_(2)capture performance.X-ray diffraction(XRD)patterns and energy dispersive X-ray spectroscopy analysis showed that the two inert supports MgO and CaZrO_(3)were uniformly distributed in the modified calcium-based sorbents.In addition,the XRD results indicated that CaZrO_(3)was produced by the reaction of ZrO_(2)and CaO at high temperatures.The effects of doping ratios,adsorption temperature,calcination temperature,CO_(2)concentration and calcination atmosphere on the adsorption capacity and cycle stability of the modified calcium-based sorbent were studied.The modified calcium-based sorbent achieved the best CO_(2)capture performance when the doping ratio was 10:1:1 with carbonation at 700℃ under 20%CO_(2)/80%N_(2)atmosphere and calcination at 900℃ under100%N_(2)atmosphere.After ten cycles,the average carbonation conversion rate of Ca-10 sorbent was 72%.Finally,the modified calcium-based sorbents successfully reduced the CO_(2)concentration of the pyrolysis gas from 37%to 5%.
文摘低浓度煤层气的提质利用对缓解国内天然气不足的现状具有重要意义,然而煤层气中存在的氮气杂质限制了该类资源的进一步应用,进行低浓度煤层气中CH_(4)/N_(2)混合物的分离至关重要。制备了两种具有弱极性超微孔的金属有机框架材料Sc-CPM-66A和In-CPM-66A,研究材料从CH_(4)/N_(2)混合物中富集CH_(4)的性能,利用PXRD、77 K N_(2)吸附、TGA和FTIR光谱对材料的结构进行了表征。IAST选择性计算表明,In-CPM-66A和Sc-CPM-66A的CH_(4)/N_(2)选择性达到6.0。受益于材料表面存在的大量的甲基基团,两种材料对CH_(4)的吸附热低于被报道的大部分材料,材料与甲烷分子之间弱的相互作用有利于吸附剂的脱附再生。穿透实验进一步表明,CPM-66A可以实现动态条件下CH_(4)/N_(2)混合物的分离,循环穿透实验显示该类材料具有良好的可重复性。
