The effects of calcination temperature and mechanical ball milling on the physicochemical properties of electrolytic manganese residue(EMR),mineral phase transition,pozzolanic activity,and pore structure were studied....The effects of calcination temperature and mechanical ball milling on the physicochemical properties of electrolytic manganese residue(EMR),mineral phase transition,pozzolanic activity,and pore structure were studied.The experimental results show that the strength activity index(SAI)of 20%EMR mixed mortar at 28 days is 90.54%,95.40%,and 90.73%,respectively,after pretreatment with EMR at 800℃calcined for 3,5,and 8 min.This is mainly attributed to the high temperature decomposition of gypsum dihydrate to form activated calcium oxide.In addition,high temperature and mechanical force destroys the Si-O chemical bond and promotes the formation of calcium silicate gel structure.Due to the existence of a large number of gypsum phases in EMR mixed mortar,a large number of ettringite,C-S-H,aluminosilicate,C-A-S-H,and AFm are formed,which strongly verifies the volcanic activity of EMR.The leaching test shows that high temperature calcination has a significant effect on the stabilization of NH_(3)-N.However,the curing effect of Mn^(2+)is significant only in the calcination at 1000℃,but both Mn^(2+)and NH_(3)-N in the calcined EMR are higher than the emission standard.The encapsulation effect of EMR composite mortar provided by hydration products,and the buffering capacity of the Si-Al system for solidification of heavy metals and strong alkalis are conducive to the stability of Mn^(2+)and NH_(3)-N.After the EMR mixed mortar is aged for 3 days,Mn and NH_(3)-N are completely lower than the emission standard.In general,the EMR mixed mortar can meet the requirements for green building use.展开更多
Aceh in Indonesia is rich inmarine resources and abundant fishery products such as oyster.Traditionally,fishermen only harvest oysters and discard the shells,which can cause pollution and environmental contamination.W...Aceh in Indonesia is rich inmarine resources and abundant fishery products such as oyster.Traditionally,fishermen only harvest oysters and discard the shells,which can cause pollution and environmental contamination.Waste Oyster Shells(WOS)contain a high percentage of calcium carbonate(CaCO_(3))that experiences thermal decomposition at high temperature,following the reaction CaCO_(3)→CaO+CO_(2)(ΔT=825℃).At temperature>900℃,dead-burned lime is formed,which severely influences CaO reactivity.However,the optimum temperature for producing high CaO content is still uncertain.Therefore,this study aimed to determine the optimum calcination temperature to produce high CaO content,assess initial setting time of WOS paste,and identify the best compressive strength of paste.For the experiment,WOS was used as a partial cement replacement(with a size of 0.075 mm)in paste at a proportion of 5%and calcined at temperature of 700℃,800℃,900℃,and 1000℃.The specimens used were an ebonite ring(dimensions:70 mm bottom diameter,60 mm top diameter,and 40 mm height)and a cube(dimensions:5 cm×5 cm×5 cm).The experiment was conducted following the ASTM(American Society for Testing andMaterials)standards and optimumcompressive strength values were analyzed using ANOVA(Analysis of Variance)and Response Surface Methodology(RSM)through the Design Expert software.The results showed that WOS calcined at 1000℃ increased CaO content by approximately 57.40%.Furthermore,the initial setting time test of 5%WOS paste at 1000℃ showed a more uniform binding performance compared to conventional cement paste,with an initial setting time of 75 min and a penetration depth of 15 mm.In line with the analysis,optimum compressive strength of 71.028 MPa with a desirability value of 0.986 was achieved at 5%cement replacement and calcination temperature of 786.44℃.展开更多
Cobalt-free nickel-manganese binary materials are one of the most promising cathode candidates for lithium-ion batteries due to the low reserves, high price,political and ecological unfriendliness of cobalt. The prepa...Cobalt-free nickel-manganese binary materials are one of the most promising cathode candidates for lithium-ion batteries due to the low reserves, high price,political and ecological unfriendliness of cobalt. The preparation of high-performance Ni-Mn bimetallic materials through controlled synthesis conditions holds significant importance for industrial applications. In this work,through systematic modulation of calcination temperatures and nickel ratios, we have effectively addressed critical challenges in binary layered cathodes, including cationic disordering, detrimental H2-H3 phase transitions, and severe interfacial side reactions. The electrochemical performance and thermal stability tests demonstrate that the medium-nickel cathode calcined at 850℃(NM64) exhibit superior comprehensive performance, including moderate discharge capacity(181.34 mAh g^(-1)at 1C), enhanced thermal stability and cycling stability(90% capacity retention after 100 cycles), excellent rate performance(125 mAh g^(-1)at high rate of 10C). Moreover, a 10 kg sample was prepared further verified its commercial application prospects. The soft-pack battery with commercial graphite anode and NM64-850 cathode achieve a discharge capacity of 171.0 mAh g^(-1)and retains 86.5% capacity after 180 cycles. The optimized integration of nickel content and calcination temperature endows binary cathodes with balanced electrochemical performance,enabling commercial viability.展开更多
Catalytic oxidation of soot is of great importance for emission control on diesel vehicles.In this work,a highly active Cs/Co/Ce-Sn catalyst was investigated for soot oxidation,and it was unexpectedly found that high-...Catalytic oxidation of soot is of great importance for emission control on diesel vehicles.In this work,a highly active Cs/Co/Ce-Sn catalyst was investigated for soot oxidation,and it was unexpectedly found that high-temperature calcination greatly improved the activity of the catalyst.When the calcination temperature was increased from 500℃ to 750℃,T_(50) decreased from 456.9℃ to 389.8℃ in a NO/O_(2)/H_(2)O/N_(2) atmosphere.Characterization results revealed that high-temperature calcination can promote the ability to transfer negative charge density from Cs to other metal cations in Cs/Co/Ce-Sn,which will facilitate the production of more oxygen defects and the generation of more surface-active oxygen species.Surfaceactive oxygen species are beneficial to the oxidation of NO to NO_(2),leading to the high yield of NO_(2) exploitation.Therefore,the Cs/Co/Ce-Sn catalyst calcined at 750℃ demonstrated higher activity than that calcined at 500℃.This work provides a pathway to prepare high efficiency catalysts for the removal of soot and significant insight into the effects of calcination on soot oxidation catalysts.展开更多
Cement production,while essential for global infrastructure,contributes significantly to carbon dioxide emissions,accounting for approximately 7%of total emissions.To mitigate these environmental impacts,flash calcina...Cement production,while essential for global infrastructure,contributes significantly to carbon dioxide emissions,accounting for approximately 7%of total emissions.To mitigate these environmental impacts,flash calcination of kaolinitic clays has been investigated as a sustainable alternative.This technique involves the rapid heating of clays,enabling their use as supplementary cementitious materials.The primary objective of this study was to modify the color of calcined clay in various atmospheres(oxidizing,inert,and reducing)to achieve a grayish tone similar to commercial cement while preserving its reactive properties.The experimental procedure employed a tubular reactor with precise control of gas flows(atmospheric air,nitrogen,and a carbon monoxide–nitrogen mixture).Physicochemical characterization of the raw clay was conducted before calcination,with analyses repeated on the calcined clays following experimentation.Results indicated that clay calcined in an oxidizing atmosphere acquired a reddish hue,attributed to the oxidation of iron in hematite.The Clay exhibited a pinkish tone in an inert atmosphere,while calcination in a reducing atmosphere yielded the desired grayish color.Regarding pozzolanic activity,clays calcined in oxidizing and inert atmospheres displayed robust strength,ranging from 82%to 87%.Calcination in a reducing atmosphere resulted in slightly lower strength,around 74%,likely due to the clay’s chemical composition and the calcination process,which affects compound formation and material reactivity.展开更多
High-temperature calcination is effective in improving the leaching characteristics of rare earth elements(REEs)from conventional REE-bearing minerals by transforming them into more leachable forms.However,the recover...High-temperature calcination is effective in improving the leaching characteristics of rare earth elements(REEs)from conventional REE-bearing minerals by transforming them into more leachable forms.However,the recovery of contaminants such as Al,Fe,and Ca also increases significantly.The objective of the study was to maximize the REE extraction while minimizing the concentration of contaminant ions(Al,Ca,and Fe)in the leach solution.Representative density fractions of the coarse refuse from the Baker and Fire Clay seam coal refuse were pulverized to a top size of 180μm and used as a feedstock for the study.All the samples generated from thermal treatment were leached at 1%(w/v)using 1.2 mol/L sulfuric acid at 75℃ for 2 h.Test results from a parametric program based on a Box-Behnken design were used for modeling and optimization of three operating parameters associated with the lab-scale calcination process.The parameters included temperature(400-800℃),ramp rate(2-10℃/min)and holding time(0-120 min).It was determined that the calcination temperature was the most significant parameter influencing REE recovery.The majority of the heavy rare earth elements(HREEs)were found to be present in an insoluble form in the calcination products and were marginally affected by thermal treatment.A strong correlation between light rare earth elements recovery(LREEs)and Al suggested a possible association with clays.The optimum operating conditions for high REE recovery with comparatively lower contaminant concentration for 1.6 specific gravity float and 2.2 sink fractions of Baker and Fire Clay seam material were determined to be at 776,800℃ and 407,800℃,calcining temperatures,respectively.A higher optimum temperature of 1.6 float fraction of Baker seam relative to Fire Clay seam material was due to elevated pyrite concentration in Baker seam material.Thermal treatment at 400℃ converted pyrite into a soluble intermedium iron oxide,resulting in a high Fe content in the leachate.Calcining at 776℃ converted most of the soluble iron oxide into insolubleα-hematite,considerably reducing the Fe concentration in the solution.展开更多
Integrated CO_(2)capture and utilization(ICCU)technology requires dual functional materials(DFMs)to carry out the process in a single reaction system.The influence of the calcination atmosphere on efficiency of 4%Ru-8...Integrated CO_(2)capture and utilization(ICCU)technology requires dual functional materials(DFMs)to carry out the process in a single reaction system.The influence of the calcination atmosphere on efficiency of 4%Ru-8%Na_(2)CO_(3)-8%CaO/γ-Al_(2)O_(3)DFM is studied.The adsorbent precursors are first co-impregnated onto alumina and calcined in air.Then,Ru precursor is impregnated and four aliquotes are subjected to different calcination protocols:static air in muffle or under different mixtures(10%H_(2)/N_(2),50%H_(2)/N_(2)and N_(2))streams.Samples are characterized by XRD,N_(2)adsorption-desorption,H_(2)chemisorption,TEM,XPS,H_(2)-TPD,H_(2)-TPR,CO_(2)-TPD and TPSR.The catalytic behavior is evaluated,in cycles of CO_(2)adsorption and hydrogenation to CH_(4),and temporal evolution of reactants and products concentrations is analyzed.The calcination atmosphere influences the physicochemical properties and,ultimately,activity of DFMs.Characterization data and catalytic performance discover the acccomodation of Ru nanoparticles disposition and basic sites is mostly influencing the catalytic activity.DFM calcined under N_(2)flow(RuNaCa-N_(2))shows the highest CH_(4)production(449μmol/g at 370℃),because a well-controlled decomposition of precursors which favors the better accomodation of adsorbent and Ru phases,maximizing the specific surface area,the Ru-basic sites interface and the participation of different basic sites in the CO_(2)methanation reaction.Thus,the calcination in a N_(2)flow is revealed as the optimal calcination protocol to achieve highly efficient DFM for integrated CO_(2)adsorption and hydrogenation applications.展开更多
Activated carbons (ACs) calcined at 400˚C, 500˚C, and 600˚C (AC-400, AC-500, and AC-600) were prepared using palm nut shells from Gabon as raw material and zinc chloride (ZnCl2) as a chemical activating agent. Prepare...Activated carbons (ACs) calcined at 400˚C, 500˚C, and 600˚C (AC-400, AC-500, and AC-600) were prepared using palm nut shells from Gabon as raw material and zinc chloride (ZnCl2) as a chemical activating agent. Prepared ACs were characterized by physisorption of nitrogen (N2), determination of diode and methylene blue numbers for studies of porosity and by quantification and determination of surface functional groups and pH at point of zero charge (pHpzc) respectively, for studies of chemical properties of prepared ACs. Then, effects of calcination temperature (Tcal) on porosity and chemical properties of prepared ACs were studied. The results obtained showed that when the calcination temperature increases from 500˚C to 600˚C, the porosity and chemical properties of prepared ACs are modified. Indeed, the methylene blue and iodine numbers determined for activated carbons AC-400 (460 and 7.94 mg·g−1, respectively) and AC-500 (680 and 8.90 mg·g−1, respectively) are higher than those obtained for AC-600 (360 and 5.75 mg·g−1, respectively). Compared to the AC-500 adsorbent, specific surface areas (SBET) and microporous volume losses for AC-600 were estimated to 44.7% and 45.8%, respectively. Moreover, in our experimental conditions, the effect of Tcal on the quantities of acidic and basic functional groups on the surface of the ACs appears negligible. In addition, results of the pHpzc of prepared ACs showed that as Tcal increases, the pH of the adsorbents increases and tends towards neutrality. Indeed, a stronger acidity was determined on AC-400 (pHpzc = 5.60) compared to those on AC-500 and AC-600 (pHpzc = 6.85 and 6.70, respectively). Also according to the results of porosity and chemical characterizations, adsorption being a surface phenomenon, 500˚C appears to be the optimal calcination temperature for the preparation of activated carbons from palm nut shells in our experimental conditions.展开更多
Parameters of technique to prepare vanadium pentoxide by calcination from ammonium metavanadate were optimized using central composite design of response surface methodology. A quadratic equation model for decompositi...Parameters of technique to prepare vanadium pentoxide by calcination from ammonium metavanadate were optimized using central composite design of response surface methodology. A quadratic equation model for decomposition rate was built and effects of main factors and their corresponding relationships were obtained. The results of the statistical analysis show that the decomposition rate of ammonium metavanadate is significantly affected by calcination temperature and calcination time. The optimized calcination conditions are as follows： calcination temperature 669.71 K, calcination time 35.9 min and sample mass 4.25 g. The decomposition rate of ammonium metavanadate is 99.71%,which coincides well with experimental value of 99.27% under the optimized conditions, suggesting that regressive equation fits the decomposition rates perfectly. XRD reveals that it is feasible to prepare the V2O5 by calcination from ammonium metavanadate using response surface methodology.展开更多
A La-modified Al2O3 catalyst was prepared with deposition-precipitation method. The effect of calcination temperature on the reactivity for vapor phase hydrofluorination of acetylene to vinyl fluoride. The catalysts c...A La-modified Al2O3 catalyst was prepared with deposition-precipitation method. The effect of calcination temperature on the reactivity for vapor phase hydrofluorination of acetylene to vinyl fluoride. The catalysts calcined at different temperatures were characterized using NH3-TPD, pyridine-FTIR, X-ray diffraction, and Raman techniques. It was found that the calcination process could not only change the structure of these catalysts but also modify the amount of surface acidity on the catalysts. The catalyst calcined at 400 ℃ exhibited the highest conversion of acetylene （94.6%） and highest selectivity to vinyl fluoride （83.4%） and lower coke deposition selectivity （0.72%）. The highest activity was related to the largest amount of surface acidity on the catalyst, and the coke deposition was also related to the total amount of surface acidic sites.展开更多
The effect of calcination temperature on the catalytic activity for the dimethyl ether （DME） carbonylation into methyl acetate （MA） was investigated over mordenite supported copper （Cu/HMOR） prepared by ion-exch...The effect of calcination temperature on the catalytic activity for the dimethyl ether （DME） carbonylation into methyl acetate （MA） was investigated over mordenite supported copper （Cu/HMOR） prepared by ion-exchange process. The results showed that the catalytic activity was obviously affected by the calcination temperature. The maximal DME conversion of 97.2% and the MA selectivity of 97.9% were obtained over the Cu/HMOR calcined at 430 ℃ under conditions of 210 ℃, 1.5 MPa, and GSHV of 4883 h^-1. The obtained Cu/HMOR catalysts were characterized by powder X-ray diffraction, N2 absorption, NH3 temperature program desorption, CO temperature program desorption, and Raman techniques. Proper calcination temperature was effective to promote copper ions migration and diffusion, and led the support HMOR to possess more acid activity sites, which exhibited the complete decomposing of copper nitrate, large surface area and optimum micropore structure, more amount of CO adsorption site and proper amount of weak acid centers.展开更多
The characteristics of the simultaneous calcination/ sulfation of limestone under oxy-fuel fluidized bed combustion were studied and compared with those of the sulfation of precalcined CaO. During the calcination stag...The characteristics of the simultaneous calcination/ sulfation of limestone under oxy-fuel fluidized bed combustion were studied and compared with those of the sulfation of precalcined CaO. During the calcination stage, SO2 can react with product CaO and slow down the CaCO3 decomposition rate by the covering effect of the CaSO4 product. The sulfation rate of simultaneous calcinatiort/sulfation is slower than that of precalcined CaO, but with a long enough sulfation time, the calcium conversion of simultaneous calcination/sulfation is higher than that of the precalcined CaO. A grain-micrograin model is established to describe the simultaneous calcination, sintering and sulfation of limestone. The graln-micrograln model can reflect the true reaction process of the calcination and sulfation of limestone in oxy-fuel fluidized bed combustion.展开更多
A series of 3DOM CeMnO3 perovskite catalysts were prepared by poly(methyl methacrylate)hardtemplating-excessive impregnation method at calcination temperature of x℃(x=600,700,800)and the heating rate of y℃/min(y=1,2...A series of 3DOM CeMnO3 perovskite catalysts were prepared by poly(methyl methacrylate)hardtemplating-excessive impregnation method at calcination temperature of x℃(x=600,700,800)and the heating rate of y℃/min(y=1,2,5,10).The samples were characterized by Brunauer-Emmett-Teller method,scanning electron microscopy,transmission electron microscopy,H2-temperature programmed reduction,X-ray photoelectron spectroscopy,X-ray diffraction,moreover,the effect of the calcination process on the catalytic activity of the samples were discussed by the catalytic combustion of toluene.The results show that the 3DOM CeMnO3 catalysts calcined at 600℃promote the formation of a perovskite structure,inhibit the reduction of the Mn4+species in the catalyst with high temperature.The catalyst expresses the complete macroporous structure,large specific surface area(38.8 m^(2)/g),higher adsorption oxygen concentration and Mn4+substance concentration,with a low T90%=172℃.By preparing the catalysts at different calcination heating rates,it can be concluded that the catalyst possesses a high concentration of adsorbed oxygen and a low reduction temperature and a large specific surface area(40.42 m^(2)/g)greatly promotes adsorption stage catalytic oxidation reaction and catalytic combustion of toluene at low temperature under the heating rate of 5℃/min.When the heating rate is 1℃/min,the catalyst has a complete macroporous structure(>250 nm),which is beneficial to the exchange of macromolecular substances during the catalytic reaction and the catalyst has a high concentration of lattice oxygen suitable for the catalysis of toluene in high temperature flue gas combustion.展开更多
The effects of calcination temperature on the physicochemical properties of manganese oxide catalysts prepared by a precipitation method were assessed by X-ray diffraction,N2 adsorption-desorption,X-ray photoelectron ...The effects of calcination temperature on the physicochemical properties of manganese oxide catalysts prepared by a precipitation method were assessed by X-ray diffraction,N2 adsorption-desorption,X-ray photoelectron spectroscopy,H2 temperature-programmed reduction,O2 temperature-programmed desorption,and thermogravimetry-differential analysis.The catalytic performance of each of these materials during the selective oxidation of cyclohexane with oxygen in a solvent-free system was subsequently examined.It was found that the MnOx-500 catalyst,calcined at 500 °C,consisted of a Mn2O3 phase in addition to Mn5O8 and Mn3O4 phases and possessed a low surface area.Unlike MnOx-500,the MnOx-400 catalyst prepared at 400 °C was composed solely of Mn3O4 and Mn5O8 and had a higher surface area.The pronounced catalytic activity of this latter material for the oxidation of cyclohexene was determined to result from numerous factors,including a higher concentration of surface adsorbed oxygen,greater quantities of the surface Mn4＋ ions that promote oxygen mobility and the extent of O2 adsorption and reducibility on the catalyst.The effects of various reaction conditions on the activity of the MnOx-400 during the oxidation of cyclohexane were also evaluated,such as the reaction temperature,reaction time,and initial oxygen pressure.Following a 4 h reaction at an initial O2 pressure of 0.5 MPa and 140 °C,an 8.0% cyclohexane conversion and 5.0% yield of cyclohexanol and cyclohexanone were achieved over the MnOx-400 catalyst.In contrast,employing MnOx-500 resulted in a 6.1% conversion of cyclohexane and 75% selectivity for cyclohexanol and cyclohexanone.After being recycled through 10 replicate uses,the catalytic activity of the MnOx-400 catalyst was unchanged,demonstrating its good stability.展开更多
Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char- acterized with X-ray diffraction （XRD）,...Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char- acterized with X-ray diffraction （XRD）, laser Raman spectroscopy, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR） and X-ray absorption fine structure （XAFS） spectroscopy. Both XRD and Raman spectroscopy only detect the existence of Co3O4 crystallites in all catalysts. However, XPS results indicate that excess Co2＋ ions are present on the surface of Co3O4 in Co3O4（200）/Si02 as compared with bulk Co3O4. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co3O4 in Co3O4（200）/SiO2, and XAFS results demonstrate that Co3O4 in Co3O4（200）/SIO2 contains excess Co2＋. Increasing calcination temperature results in oxidation of excess Co2＋ and the decrease of the concentration of surface oxygen vacancies, consequently the for- mation of stoichiometric Co3O4 on supported catalysts. Among all Co3O4/SiO2 catalysts, Co3O4（200）/SiO2 exhibits the best catalytic performance towards CO oxidation, demonstrating that excess Co2＋ and surface oxygen vacancies can enhance the catalytic activity of Co3O4 towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silicasupported Co3O4 catalysts and highlight the important role of surface oxygen vacancies on Co3O4.展开更多
Muscovite mineral was roasted in different conditions.Rubidium leaching rate was a standard to examine the impact of various factors on calcination effect,including the agent types,roasting time,mass ratio,and roastin...Muscovite mineral was roasted in different conditions.Rubidium leaching rate was a standard to examine the impact of various factors on calcination effect,including the agent types,roasting time,mass ratio,and roasting temperature.The results indicate that the best agent is the combination of sodium chloride and calcium chloride,and its mass ratio of muscovite/NaCl/CaCl2is1.00:0.25:0.25.Calcined at 850℃ for 30 min,the rubidium leaching rate is up to 90.12%.The reaction of muscovite ore with the chlorinating agent CaCl2was studied by TG/DSC,and the surface morphology before and after leaching was characterized by SEM.Rubidium chloride products can be obtained using t-BAMBP extraction,hydrochloric acid re-extraction,and purification.展开更多
A series of CeO2-ZrO2-WO3 catalysts for the selective catalytic reduction （SCR） of NO with NH3 were prepared by hydrothermal method. The influence of calcination temperature on the catalytic activity, microstructure...A series of CeO2-ZrO2-WO3 catalysts for the selective catalytic reduction （SCR） of NO with NH3 were prepared by hydrothermal method. The influence of calcination temperature on the catalytic activity, microstructure, surface acidity and redox behavior of CeO2-ZrO2-WO3 catalyst was investigated using various characterization methods. It was found that the CeO2-ZrO2-WO3 catalyst calcined at 600 ℃ showed the best catalytic performance and excellent N2 selectivity, and yielded more than 90% NO conversion in a wide temperature range of 250-500 ℃ with a space velocity （GHSV） of 60000 131. As the calcination temperature was increased from 400 to 600 ℃, the NO conversion obviously increased, but decreased at higher calcination temperature. The results implied that the higher surface area, the strongest synergistic interaction, the superior redox property and the highly dispersed or amorphous WO3 species contributed to the excellent SCR activity of the CeO2-ZrO2-WO3 catalyst calcined at 600℃.展开更多
Photocatalytic hydrogen peroxide(H_(2)O_(2))production from O_(2) and H2O is an ideal process for solar‐to‐chemical energy conversion.Herein,ZnO nanorods are prepared via a simple hydrothermal method for photocataly...Photocatalytic hydrogen peroxide(H_(2)O_(2))production from O_(2) and H2O is an ideal process for solar‐to‐chemical energy conversion.Herein,ZnO nanorods are prepared via a simple hydrothermal method for photocatalytic H_(2)O_(2) production.The ZnO nanorods exhibit varied performance with different calcination temperatures.Benefiting from calcination,the separation efficiency of photo‐induced carriers is significantly improved,leading to the superior photocatalytic activity for H_(2)O_(2) production.The H_(2)O_(2) produced by ZnO calcined at 300℃ is 285μmol L^(−1),which is over 5 times larger than that produced by untreated ZnO.This work provides an insight into photocatalytic H2O2 production mechanism by ZnO nanorods,and presents a promising strategy to H2O2 production.展开更多
CuSO4/TiO2 catalysts with high catalytic activity and excellent resistant to SO2 and H2 O,were thought to be promising catalysts used in Selective catalytic reduction of nitrogen oxides by NH3.The performance of catal...CuSO4/TiO2 catalysts with high catalytic activity and excellent resistant to SO2 and H2 O,were thought to be promising catalysts used in Selective catalytic reduction of nitrogen oxides by NH3.The performance of catalysts is largely affected by calcination temperature.Here,effects of calcination temperature on physicochemical property and catalytic activity of CuSO4/TiO2 catalysts were investigated in depth.Catalyst samples calcined at different temperatures were prepared first and then physicochemical properties of the catalyst were characterized by N2 adsorption-desorption,X-ray diffraction,thermogravimetric analysis,Raman spectra,Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,temperature-pro grammed desorption of NH3,temperature-programmed reduction of H2 and in situ diffuse reflectance infrared Fourier transform spectroscopy.Results revealed that high calcination temperature had three main effects on the catalyst.First,sintering and anatase transform into rutile with increase of calcination temperature,causing a decrement of specific surface area.Second,decomposition of CuSO4 under higher calcination temperature,resulting in disappears of Br(?)nsted acid sites(S-OH),which had an adverse effect on surface acidity.Third,CuO from the decomposition of CuSO4 changed surface reducibility of the catalyst and favored the process of NH3 oxidation to nitrogen oxides(NOx).Thus,catalytic activity of the catalyst calcined under high temperatures(≥600℃)decreased largely.展开更多
A series of 0.2 wt% Pd/Sn_(0.9)Ce_(0.1)O_2 catalysts were prepared by impregnation method based on the presynthesis of Sn_(0.9)Ce_(0.1)O_2 support prepared by co-precipitation method, and then characterized by Brunaue...A series of 0.2 wt% Pd/Sn_(0.9)Ce_(0.1)O_2 catalysts were prepared by impregnation method based on the presynthesis of Sn_(0.9)Ce_(0.1)O_2 support prepared by co-precipitation method, and then characterized by Brunauer–Emmett–Teller(BET), X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), Raman, CO chemical adsorption and hydrogen temperature-programmed reduction(H_2-TPR) techniques. The effect of calcination temperature of the composite oxide support on the catalytic performances of the Pd/Sn_(0.9)Ce_(0.1)O_2 catalyst for the CH_4 total oxidation was studied. It is found that the catalytic activity of the Pd/Sn_(0.9)Ce_(0.1)O_2 catalyst increases with the increase in calcination temperature of the Pd/Sn_(0.9)Ce_(0.1)O_2 support. The 0.2 wt% Pd/Sn_(0.9)Ce_(0.1)O_2/1100 catalyst(the Pd/Sn_(0.9)Ce_(0.1)O_2 support was calcined at 1100 ℃) exhibits the best reactive activity(T_(10)= 255 ℃). The excellent activity of the 0.2 wt% Pd/Sn_(0.9)Ce_(0.1)O_2/1100 catalyst should be attributed to the high reducibility of PdO, the excellent oxygen mobility of the support and the high content of active Pd^(2+) species on the Pd/Sn_(0.9)Ce_(0.1)O_2 catalyst.展开更多
基金Funded by the National Natural Science Foundation of China(No.52178216)the Gansu Provincial Science and Technology Programme(No.23JRRA813)。
文摘The effects of calcination temperature and mechanical ball milling on the physicochemical properties of electrolytic manganese residue(EMR),mineral phase transition,pozzolanic activity,and pore structure were studied.The experimental results show that the strength activity index(SAI)of 20%EMR mixed mortar at 28 days is 90.54%,95.40%,and 90.73%,respectively,after pretreatment with EMR at 800℃calcined for 3,5,and 8 min.This is mainly attributed to the high temperature decomposition of gypsum dihydrate to form activated calcium oxide.In addition,high temperature and mechanical force destroys the Si-O chemical bond and promotes the formation of calcium silicate gel structure.Due to the existence of a large number of gypsum phases in EMR mixed mortar,a large number of ettringite,C-S-H,aluminosilicate,C-A-S-H,and AFm are formed,which strongly verifies the volcanic activity of EMR.The leaching test shows that high temperature calcination has a significant effect on the stabilization of NH_(3)-N.However,the curing effect of Mn^(2+)is significant only in the calcination at 1000℃,but both Mn^(2+)and NH_(3)-N in the calcined EMR are higher than the emission standard.The encapsulation effect of EMR composite mortar provided by hydration products,and the buffering capacity of the Si-Al system for solidification of heavy metals and strong alkalis are conducive to the stability of Mn^(2+)and NH_(3)-N.After the EMR mixed mortar is aged for 3 days,Mn and NH_(3)-N are completely lower than the emission standard.In general,the EMR mixed mortar can meet the requirements for green building use.
文摘Aceh in Indonesia is rich inmarine resources and abundant fishery products such as oyster.Traditionally,fishermen only harvest oysters and discard the shells,which can cause pollution and environmental contamination.Waste Oyster Shells(WOS)contain a high percentage of calcium carbonate(CaCO_(3))that experiences thermal decomposition at high temperature,following the reaction CaCO_(3)→CaO+CO_(2)(ΔT=825℃).At temperature>900℃,dead-burned lime is formed,which severely influences CaO reactivity.However,the optimum temperature for producing high CaO content is still uncertain.Therefore,this study aimed to determine the optimum calcination temperature to produce high CaO content,assess initial setting time of WOS paste,and identify the best compressive strength of paste.For the experiment,WOS was used as a partial cement replacement(with a size of 0.075 mm)in paste at a proportion of 5%and calcined at temperature of 700℃,800℃,900℃,and 1000℃.The specimens used were an ebonite ring(dimensions:70 mm bottom diameter,60 mm top diameter,and 40 mm height)and a cube(dimensions:5 cm×5 cm×5 cm).The experiment was conducted following the ASTM(American Society for Testing andMaterials)standards and optimumcompressive strength values were analyzed using ANOVA(Analysis of Variance)and Response Surface Methodology(RSM)through the Design Expert software.The results showed that WOS calcined at 1000℃ increased CaO content by approximately 57.40%.Furthermore,the initial setting time test of 5%WOS paste at 1000℃ showed a more uniform binding performance compared to conventional cement paste,with an initial setting time of 75 min and a penetration depth of 15 mm.In line with the analysis,optimum compressive strength of 71.028 MPa with a desirability value of 0.986 was achieved at 5%cement replacement and calcination temperature of 786.44℃.
基金supported by the National Natural Science Foundation of China(Nos.52074113,22005091 and 22005092)Shanxi Province Transformation Program of Scientific and Technological Achievements(No.202304021301032)+8 种基金the Fundamental Research Program of Shanxi Province(No.202403021211075)Hunan University Outstanding Youth Science Foundation(No.531118040319)The science and technology innovation Program of Hunan Province(No.2021RC3055)Changsha Municipal Natural Science Foundation(No.43184)the CITIC Metals Ningbo Energy Co.Ltd.(No.H202191380246)Chongqing Talents:Exceptional Young Talents Project(No.CQYC202105015)Shenzhen Virtual University Park Basic Research Project of Free exploration(No.2021Szvup036)the National Key Research and Development Program of China(No.2022YFB2402400)Shenzhen Virtual University Park Basic Research Project of Free exploration(No.2021Szvup036)
文摘Cobalt-free nickel-manganese binary materials are one of the most promising cathode candidates for lithium-ion batteries due to the low reserves, high price,political and ecological unfriendliness of cobalt. The preparation of high-performance Ni-Mn bimetallic materials through controlled synthesis conditions holds significant importance for industrial applications. In this work,through systematic modulation of calcination temperatures and nickel ratios, we have effectively addressed critical challenges in binary layered cathodes, including cationic disordering, detrimental H2-H3 phase transitions, and severe interfacial side reactions. The electrochemical performance and thermal stability tests demonstrate that the medium-nickel cathode calcined at 850℃(NM64) exhibit superior comprehensive performance, including moderate discharge capacity(181.34 mAh g^(-1)at 1C), enhanced thermal stability and cycling stability(90% capacity retention after 100 cycles), excellent rate performance(125 mAh g^(-1)at high rate of 10C). Moreover, a 10 kg sample was prepared further verified its commercial application prospects. The soft-pack battery with commercial graphite anode and NM64-850 cathode achieve a discharge capacity of 171.0 mAh g^(-1)and retains 86.5% capacity after 180 cycles. The optimized integration of nickel content and calcination temperature endows binary cathodes with balanced electrochemical performance,enabling commercial viability.
基金supported by the National Natural Science Foundation of China(Nos.22206183,52225004)the National Key R&D Program of China(No.2022YFC3701804)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA23010201)the Youth Innovation Promotion Association of Chinese Academy of Sciences(No.2022309)。
文摘Catalytic oxidation of soot is of great importance for emission control on diesel vehicles.In this work,a highly active Cs/Co/Ce-Sn catalyst was investigated for soot oxidation,and it was unexpectedly found that high-temperature calcination greatly improved the activity of the catalyst.When the calcination temperature was increased from 500℃ to 750℃,T_(50) decreased from 456.9℃ to 389.8℃ in a NO/O_(2)/H_(2)O/N_(2) atmosphere.Characterization results revealed that high-temperature calcination can promote the ability to transfer negative charge density from Cs to other metal cations in Cs/Co/Ce-Sn,which will facilitate the production of more oxygen defects and the generation of more surface-active oxygen species.Surfaceactive oxygen species are beneficial to the oxidation of NO to NO_(2),leading to the high yield of NO_(2) exploitation.Therefore,the Cs/Co/Ce-Sn catalyst calcined at 750℃ demonstrated higher activity than that calcined at 500℃.This work provides a pathway to prepare high efficiency catalysts for the removal of soot and significant insight into the effects of calcination on soot oxidation catalysts.
基金financial support for the research and for the publication costs of the articlesupported by Santa Catarina State Research Support Foundation(FAPESC)National Council for Scientific and Technological Development(CNPq no 302903/2023-2).
文摘Cement production,while essential for global infrastructure,contributes significantly to carbon dioxide emissions,accounting for approximately 7%of total emissions.To mitigate these environmental impacts,flash calcination of kaolinitic clays has been investigated as a sustainable alternative.This technique involves the rapid heating of clays,enabling their use as supplementary cementitious materials.The primary objective of this study was to modify the color of calcined clay in various atmospheres(oxidizing,inert,and reducing)to achieve a grayish tone similar to commercial cement while preserving its reactive properties.The experimental procedure employed a tubular reactor with precise control of gas flows(atmospheric air,nitrogen,and a carbon monoxide–nitrogen mixture).Physicochemical characterization of the raw clay was conducted before calcination,with analyses repeated on the calcined clays following experimentation.Results indicated that clay calcined in an oxidizing atmosphere acquired a reddish hue,attributed to the oxidation of iron in hematite.The Clay exhibited a pinkish tone in an inert atmosphere,while calcination in a reducing atmosphere yielded the desired grayish color.Regarding pozzolanic activity,clays calcined in oxidizing and inert atmospheres displayed robust strength,ranging from 82%to 87%.Calcination in a reducing atmosphere resulted in slightly lower strength,around 74%,likely due to the clay’s chemical composition and the calcination process,which affects compound formation and material reactivity.
基金Project supported by the U.S.Department of Energy(DEFE0031827)。
文摘High-temperature calcination is effective in improving the leaching characteristics of rare earth elements(REEs)from conventional REE-bearing minerals by transforming them into more leachable forms.However,the recovery of contaminants such as Al,Fe,and Ca also increases significantly.The objective of the study was to maximize the REE extraction while minimizing the concentration of contaminant ions(Al,Ca,and Fe)in the leach solution.Representative density fractions of the coarse refuse from the Baker and Fire Clay seam coal refuse were pulverized to a top size of 180μm and used as a feedstock for the study.All the samples generated from thermal treatment were leached at 1%(w/v)using 1.2 mol/L sulfuric acid at 75℃ for 2 h.Test results from a parametric program based on a Box-Behnken design were used for modeling and optimization of three operating parameters associated with the lab-scale calcination process.The parameters included temperature(400-800℃),ramp rate(2-10℃/min)and holding time(0-120 min).It was determined that the calcination temperature was the most significant parameter influencing REE recovery.The majority of the heavy rare earth elements(HREEs)were found to be present in an insoluble form in the calcination products and were marginally affected by thermal treatment.A strong correlation between light rare earth elements recovery(LREEs)and Al suggested a possible association with clays.The optimum operating conditions for high REE recovery with comparatively lower contaminant concentration for 1.6 specific gravity float and 2.2 sink fractions of Baker and Fire Clay seam material were determined to be at 776,800℃ and 407,800℃,calcining temperatures,respectively.A higher optimum temperature of 1.6 float fraction of Baker seam relative to Fire Clay seam material was due to elevated pyrite concentration in Baker seam material.Thermal treatment at 400℃ converted pyrite into a soluble intermedium iron oxide,resulting in a high Fe content in the leachate.Calcining at 776℃ converted most of the soluble iron oxide into insolubleα-hematite,considerably reducing the Fe concentration in the solution.
基金supported by Ministry of Science and InnovationNational Research Agency(Project PID2019-105960RBC21)+1 种基金by the Basque Government(Project IT1509-2022)One of the authors(JAOC)acknowledges the post-doctoral research grant(DOCREC20/49)provided by the University of the Basque Country。
文摘Integrated CO_(2)capture and utilization(ICCU)technology requires dual functional materials(DFMs)to carry out the process in a single reaction system.The influence of the calcination atmosphere on efficiency of 4%Ru-8%Na_(2)CO_(3)-8%CaO/γ-Al_(2)O_(3)DFM is studied.The adsorbent precursors are first co-impregnated onto alumina and calcined in air.Then,Ru precursor is impregnated and four aliquotes are subjected to different calcination protocols:static air in muffle or under different mixtures(10%H_(2)/N_(2),50%H_(2)/N_(2)and N_(2))streams.Samples are characterized by XRD,N_(2)adsorption-desorption,H_(2)chemisorption,TEM,XPS,H_(2)-TPD,H_(2)-TPR,CO_(2)-TPD and TPSR.The catalytic behavior is evaluated,in cycles of CO_(2)adsorption and hydrogenation to CH_(4),and temporal evolution of reactants and products concentrations is analyzed.The calcination atmosphere influences the physicochemical properties and,ultimately,activity of DFMs.Characterization data and catalytic performance discover the acccomodation of Ru nanoparticles disposition and basic sites is mostly influencing the catalytic activity.DFM calcined under N_(2)flow(RuNaCa-N_(2))shows the highest CH_(4)production(449μmol/g at 370℃),because a well-controlled decomposition of precursors which favors the better accomodation of adsorbent and Ru phases,maximizing the specific surface area,the Ru-basic sites interface and the participation of different basic sites in the CO_(2)methanation reaction.Thus,the calcination in a N_(2)flow is revealed as the optimal calcination protocol to achieve highly efficient DFM for integrated CO_(2)adsorption and hydrogenation applications.
文摘Activated carbons (ACs) calcined at 400˚C, 500˚C, and 600˚C (AC-400, AC-500, and AC-600) were prepared using palm nut shells from Gabon as raw material and zinc chloride (ZnCl2) as a chemical activating agent. Prepared ACs were characterized by physisorption of nitrogen (N2), determination of diode and methylene blue numbers for studies of porosity and by quantification and determination of surface functional groups and pH at point of zero charge (pHpzc) respectively, for studies of chemical properties of prepared ACs. Then, effects of calcination temperature (Tcal) on porosity and chemical properties of prepared ACs were studied. The results obtained showed that when the calcination temperature increases from 500˚C to 600˚C, the porosity and chemical properties of prepared ACs are modified. Indeed, the methylene blue and iodine numbers determined for activated carbons AC-400 (460 and 7.94 mg·g−1, respectively) and AC-500 (680 and 8.90 mg·g−1, respectively) are higher than those obtained for AC-600 (360 and 5.75 mg·g−1, respectively). Compared to the AC-500 adsorbent, specific surface areas (SBET) and microporous volume losses for AC-600 were estimated to 44.7% and 45.8%, respectively. Moreover, in our experimental conditions, the effect of Tcal on the quantities of acidic and basic functional groups on the surface of the ACs appears negligible. In addition, results of the pHpzc of prepared ACs showed that as Tcal increases, the pH of the adsorbents increases and tends towards neutrality. Indeed, a stronger acidity was determined on AC-400 (pHpzc = 5.60) compared to those on AC-500 and AC-600 (pHpzc = 6.85 and 6.70, respectively). Also according to the results of porosity and chemical characterizations, adsorption being a surface phenomenon, 500˚C appears to be the optimal calcination temperature for the preparation of activated carbons from palm nut shells in our experimental conditions.
基金Project (50734007) supported by the National Natural Science Foundation of ChinaProject (2007GA002) supported by Science and Technology Planning of Yunnan Province, ChinaProject (2008-16) supported by Analysis and Testing Foundation of Kunming University of Science and Technology, China
文摘Parameters of technique to prepare vanadium pentoxide by calcination from ammonium metavanadate were optimized using central composite design of response surface methodology. A quadratic equation model for decomposition rate was built and effects of main factors and their corresponding relationships were obtained. The results of the statistical analysis show that the decomposition rate of ammonium metavanadate is significantly affected by calcination temperature and calcination time. The optimized calcination conditions are as follows： calcination temperature 669.71 K, calcination time 35.9 min and sample mass 4.25 g. The decomposition rate of ammonium metavanadate is 99.71%,which coincides well with experimental value of 99.27% under the optimized conditions, suggesting that regressive equation fits the decomposition rates perfectly. XRD reveals that it is feasible to prepare the V2O5 by calcination from ammonium metavanadate using response surface methodology.
基金ACKNOWLEDGMENT This work was supported by the National Natural Science Foundation of China （No.20873125）,
文摘A La-modified Al2O3 catalyst was prepared with deposition-precipitation method. The effect of calcination temperature on the reactivity for vapor phase hydrofluorination of acetylene to vinyl fluoride. The catalysts calcined at different temperatures were characterized using NH3-TPD, pyridine-FTIR, X-ray diffraction, and Raman techniques. It was found that the calcination process could not only change the structure of these catalysts but also modify the amount of surface acidity on the catalysts. The catalyst calcined at 400 ℃ exhibited the highest conversion of acetylene （94.6%） and highest selectivity to vinyl fluoride （83.4%） and lower coke deposition selectivity （0.72%）. The highest activity was related to the largest amount of surface acidity on the catalyst, and the coke deposition was also related to the total amount of surface acidic sites.
基金This work was supported by the National Natural Science Foundation of China （No.51006110 and No.51276183） and the National Natural Research Foundation of China/Japan Science and Technology Agency （No.51161140331）.
文摘The effect of calcination temperature on the catalytic activity for the dimethyl ether （DME） carbonylation into methyl acetate （MA） was investigated over mordenite supported copper （Cu/HMOR） prepared by ion-exchange process. The results showed that the catalytic activity was obviously affected by the calcination temperature. The maximal DME conversion of 97.2% and the MA selectivity of 97.9% were obtained over the Cu/HMOR calcined at 430 ℃ under conditions of 210 ℃, 1.5 MPa, and GSHV of 4883 h^-1. The obtained Cu/HMOR catalysts were characterized by powder X-ray diffraction, N2 absorption, NH3 temperature program desorption, CO temperature program desorption, and Raman techniques. Proper calcination temperature was effective to promote copper ions migration and diffusion, and led the support HMOR to possess more acid activity sites, which exhibited the complete decomposing of copper nitrate, large surface area and optimum micropore structure, more amount of CO adsorption site and proper amount of weak acid centers.
基金The National Natural Science Foundation of China(No.51276064)the Natural Science Foundation of Hebei Province(No.E2013502292)
文摘The characteristics of the simultaneous calcination/ sulfation of limestone under oxy-fuel fluidized bed combustion were studied and compared with those of the sulfation of precalcined CaO. During the calcination stage, SO2 can react with product CaO and slow down the CaCO3 decomposition rate by the covering effect of the CaSO4 product. The sulfation rate of simultaneous calcinatiort/sulfation is slower than that of precalcined CaO, but with a long enough sulfation time, the calcium conversion of simultaneous calcination/sulfation is higher than that of the precalcined CaO. A grain-micrograin model is established to describe the simultaneous calcination, sintering and sulfation of limestone. The graln-micrograln model can reflect the true reaction process of the calcination and sulfation of limestone in oxy-fuel fluidized bed combustion.
基金Project supported by Natural Science Foundation of Shandong Province(ZR2019MEE112)。
文摘A series of 3DOM CeMnO3 perovskite catalysts were prepared by poly(methyl methacrylate)hardtemplating-excessive impregnation method at calcination temperature of x℃(x=600,700,800)and the heating rate of y℃/min(y=1,2,5,10).The samples were characterized by Brunauer-Emmett-Teller method,scanning electron microscopy,transmission electron microscopy,H2-temperature programmed reduction,X-ray photoelectron spectroscopy,X-ray diffraction,moreover,the effect of the calcination process on the catalytic activity of the samples were discussed by the catalytic combustion of toluene.The results show that the 3DOM CeMnO3 catalysts calcined at 600℃promote the formation of a perovskite structure,inhibit the reduction of the Mn4+species in the catalyst with high temperature.The catalyst expresses the complete macroporous structure,large specific surface area(38.8 m^(2)/g),higher adsorption oxygen concentration and Mn4+substance concentration,with a low T90%=172℃.By preparing the catalysts at different calcination heating rates,it can be concluded that the catalyst possesses a high concentration of adsorbed oxygen and a low reduction temperature and a large specific surface area(40.42 m^(2)/g)greatly promotes adsorption stage catalytic oxidation reaction and catalytic combustion of toluene at low temperature under the heating rate of 5℃/min.When the heating rate is 1℃/min,the catalyst has a complete macroporous structure(>250 nm),which is beneficial to the exchange of macromolecular substances during the catalytic reaction and the catalyst has a high concentration of lattice oxygen suitable for the catalysis of toluene in high temperature flue gas combustion.
基金supported by the National Basic Research Program of China(973 Program,2010CB732300)the National Natural Science Foundation of China(21103048)~~
文摘The effects of calcination temperature on the physicochemical properties of manganese oxide catalysts prepared by a precipitation method were assessed by X-ray diffraction,N2 adsorption-desorption,X-ray photoelectron spectroscopy,H2 temperature-programmed reduction,O2 temperature-programmed desorption,and thermogravimetry-differential analysis.The catalytic performance of each of these materials during the selective oxidation of cyclohexane with oxygen in a solvent-free system was subsequently examined.It was found that the MnOx-500 catalyst,calcined at 500 °C,consisted of a Mn2O3 phase in addition to Mn5O8 and Mn3O4 phases and possessed a low surface area.Unlike MnOx-500,the MnOx-400 catalyst prepared at 400 °C was composed solely of Mn3O4 and Mn5O8 and had a higher surface area.The pronounced catalytic activity of this latter material for the oxidation of cyclohexene was determined to result from numerous factors,including a higher concentration of surface adsorbed oxygen,greater quantities of the surface Mn4＋ ions that promote oxygen mobility and the extent of O2 adsorption and reducibility on the catalyst.The effects of various reaction conditions on the activity of the MnOx-400 during the oxidation of cyclohexane were also evaluated,such as the reaction temperature,reaction time,and initial oxygen pressure.Following a 4 h reaction at an initial O2 pressure of 0.5 MPa and 140 °C,an 8.0% cyclohexane conversion and 5.0% yield of cyclohexanol and cyclohexanone were achieved over the MnOx-400 catalyst.In contrast,employing MnOx-500 resulted in a 6.1% conversion of cyclohexane and 75% selectivity for cyclohexanol and cyclohexanone.After being recycled through 10 replicate uses,the catalytic activity of the MnOx-400 catalyst was unchanged,demonstrating its good stability.
文摘Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char- acterized with X-ray diffraction （XRD）, laser Raman spectroscopy, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR） and X-ray absorption fine structure （XAFS） spectroscopy. Both XRD and Raman spectroscopy only detect the existence of Co3O4 crystallites in all catalysts. However, XPS results indicate that excess Co2＋ ions are present on the surface of Co3O4 in Co3O4（200）/Si02 as compared with bulk Co3O4. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co3O4 in Co3O4（200）/SiO2, and XAFS results demonstrate that Co3O4 in Co3O4（200）/SIO2 contains excess Co2＋. Increasing calcination temperature results in oxidation of excess Co2＋ and the decrease of the concentration of surface oxygen vacancies, consequently the for- mation of stoichiometric Co3O4 on supported catalysts. Among all Co3O4/SiO2 catalysts, Co3O4（200）/SiO2 exhibits the best catalytic performance towards CO oxidation, demonstrating that excess Co2＋ and surface oxygen vacancies can enhance the catalytic activity of Co3O4 towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silicasupported Co3O4 catalysts and highlight the important role of surface oxygen vacancies on Co3O4.
基金supported by the Chinese Nonferrous Guilin Research Institute of Geology for Mineral Resource (No.ky20101372000001)
文摘Muscovite mineral was roasted in different conditions.Rubidium leaching rate was a standard to examine the impact of various factors on calcination effect,including the agent types,roasting time,mass ratio,and roasting temperature.The results indicate that the best agent is the combination of sodium chloride and calcium chloride,and its mass ratio of muscovite/NaCl/CaCl2is1.00:0.25:0.25.Calcined at 850℃ for 30 min,the rubidium leaching rate is up to 90.12%.The reaction of muscovite ore with the chlorinating agent CaCl2was studied by TG/DSC,and the surface morphology before and after leaching was characterized by SEM.Rubidium chloride products can be obtained using t-BAMBP extraction,hydrochloric acid re-extraction,and purification.
基金Project supported by the National Natural Science Foundation of China(21377048,21307047)the Opening Project of Key Laboratory of Green Catalysis of Sichuan Institutes of High Education(LYJ1309)
文摘A series of CeO2-ZrO2-WO3 catalysts for the selective catalytic reduction （SCR） of NO with NH3 were prepared by hydrothermal method. The influence of calcination temperature on the catalytic activity, microstructure, surface acidity and redox behavior of CeO2-ZrO2-WO3 catalyst was investigated using various characterization methods. It was found that the CeO2-ZrO2-WO3 catalyst calcined at 600 ℃ showed the best catalytic performance and excellent N2 selectivity, and yielded more than 90% NO conversion in a wide temperature range of 250-500 ℃ with a space velocity （GHSV） of 60000 131. As the calcination temperature was increased from 400 to 600 ℃, the NO conversion obviously increased, but decreased at higher calcination temperature. The results implied that the higher surface area, the strongest synergistic interaction, the superior redox property and the highly dispersed or amorphous WO3 species contributed to the excellent SCR activity of the CeO2-ZrO2-WO3 catalyst calcined at 600℃.
文摘Photocatalytic hydrogen peroxide(H_(2)O_(2))production from O_(2) and H2O is an ideal process for solar‐to‐chemical energy conversion.Herein,ZnO nanorods are prepared via a simple hydrothermal method for photocatalytic H_(2)O_(2) production.The ZnO nanorods exhibit varied performance with different calcination temperatures.Benefiting from calcination,the separation efficiency of photo‐induced carriers is significantly improved,leading to the superior photocatalytic activity for H_(2)O_(2) production.The H_(2)O_(2) produced by ZnO calcined at 300℃ is 285μmol L^(−1),which is over 5 times larger than that produced by untreated ZnO.This work provides an insight into photocatalytic H2O2 production mechanism by ZnO nanorods,and presents a promising strategy to H2O2 production.
基金supported by the National Natural Science Foundation of China(Nos.21906127,21677114,21876139 and 21922606)the Key R&D Program of Shaanxi Province(Nos.2019SF-244 and 2019ZDLSF05-05-02)+4 种基金the China PostdoctoralScience Foundation(No.2016M602831)Natural Science Foundation of Shaanxi Province,China(No.2019JQ-502)the Fundamental Research Funds for the Central Universities(Nos.xjj2017113 and xjj2017170)financial supports from the China Scholarship Councilthe support of K.C.Wong Education Foundation
文摘CuSO4/TiO2 catalysts with high catalytic activity and excellent resistant to SO2 and H2 O,were thought to be promising catalysts used in Selective catalytic reduction of nitrogen oxides by NH3.The performance of catalysts is largely affected by calcination temperature.Here,effects of calcination temperature on physicochemical property and catalytic activity of CuSO4/TiO2 catalysts were investigated in depth.Catalyst samples calcined at different temperatures were prepared first and then physicochemical properties of the catalyst were characterized by N2 adsorption-desorption,X-ray diffraction,thermogravimetric analysis,Raman spectra,Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,temperature-pro grammed desorption of NH3,temperature-programmed reduction of H2 and in situ diffuse reflectance infrared Fourier transform spectroscopy.Results revealed that high calcination temperature had three main effects on the catalyst.First,sintering and anatase transform into rutile with increase of calcination temperature,causing a decrement of specific surface area.Second,decomposition of CuSO4 under higher calcination temperature,resulting in disappears of Br(?)nsted acid sites(S-OH),which had an adverse effect on surface acidity.Third,CuO from the decomposition of CuSO4 changed surface reducibility of the catalyst and favored the process of NH3 oxidation to nitrogen oxides(NOx).Thus,catalytic activity of the catalyst calcined under high temperatures(≥600℃)decreased largely.
基金financially supported by the National Key Research and Development Program of China (No. 2016YFC0204300)the National Key Basic Research Program of China (No. 2013CB933200)Science and Technology Commission of Shanghai Municipality (No. 16ZR1407900)
文摘A series of 0.2 wt% Pd/Sn_(0.9)Ce_(0.1)O_2 catalysts were prepared by impregnation method based on the presynthesis of Sn_(0.9)Ce_(0.1)O_2 support prepared by co-precipitation method, and then characterized by Brunauer–Emmett–Teller(BET), X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), Raman, CO chemical adsorption and hydrogen temperature-programmed reduction(H_2-TPR) techniques. The effect of calcination temperature of the composite oxide support on the catalytic performances of the Pd/Sn_(0.9)Ce_(0.1)O_2 catalyst for the CH_4 total oxidation was studied. It is found that the catalytic activity of the Pd/Sn_(0.9)Ce_(0.1)O_2 catalyst increases with the increase in calcination temperature of the Pd/Sn_(0.9)Ce_(0.1)O_2 support. The 0.2 wt% Pd/Sn_(0.9)Ce_(0.1)O_2/1100 catalyst(the Pd/Sn_(0.9)Ce_(0.1)O_2 support was calcined at 1100 ℃) exhibits the best reactive activity(T_(10)= 255 ℃). The excellent activity of the 0.2 wt% Pd/Sn_(0.9)Ce_(0.1)O_2/1100 catalyst should be attributed to the high reducibility of PdO, the excellent oxygen mobility of the support and the high content of active Pd^(2+) species on the Pd/Sn_(0.9)Ce_(0.1)O_2 catalyst.
