A three-layer structure model is proposed for investigating the effect of a soft elastic middle layer on the propagation behavior of Love waves in piezoelectric layered systems, with ＂soft＂ implying that the bulk-sh...A three-layer structure model is proposed for investigating the effect of a soft elastic middle layer on the propagation behavior of Love waves in piezoelectric layered systems, with ＂soft＂ implying that the bulk-shear-wave velocity of the middle layer is smaller than that of the upper sensitive layer. Dispersion equations are obtained for unelectroded and traction-free upper surfaces which, in the limit, can be reduced to those for classical Love waves. Systematic parametric studies are subsequently carried out to quantify the effects of the soft middle layer upon Love wave propagation, including its thickness, mass density, dielectric constant and elastic coefficient. It is demonstrated that whilst the thickness and elastic coefficient of the middle layer affect significantly Love wave propagation, its mass density and dielectric constant have negligible influence. On condition that both the thickness and elastic coefficient of the middle layer are vanishingly small so that it degenerates into an imperfectly bonded interface, the three-layer model is also employed to investigate the influence of imperfect interfaces on Love waves propagating in piezoelectric layer/elastic sub- strate systems. Upon comparing with the predictions ob- tained by employing the traditional shear-lag model, the present three-layer structure model is found to be more ac- curate as it avoids the unrealistic displacement discontinuity across imperfectly bonded interfaces assumed by the shearlag model, especially for long waves when the piezoelectric layer is relatively thin.展开更多
The study aims to explore the damage characteristics and protection technologies of liquid-filled structures under high-speed projectile impact.A series of penetration impact experiments were conducted by focusing on ...The study aims to explore the damage characteristics and protection technologies of liquid-filled structures under high-speed projectile impact.A series of penetration impact experiments were conducted by focusing on different air layer configurations.By using high-speed camera and dynamic measurement systems,the effects of air layers on the projectile penetration,pressure wave propagation,cavitation evolution,and structural dynamic responses were analyzed.The results showed that the rarefaction wave reflected from the air-liquid interface significantly reduced the peak and specific impulse of the initial pressure wave,thereby diminishing the impact load on the structure.Additionally,the compressibility of air layers also attenuated the cavitation extrusion load.Both front and rear plates exhibited superimposed deformation modes,i.e.,local deformation or petal fracture with global deformation.Air layers effectively mitigated global deformation.However,when the air layer was positioned on the projectile's trajectory,it split the water-entry process and velocity attenuation of the projectile into two relatively independent phases.And the secondary water entry pressure wave caused more severe local deformation and petal fractures on the rear plate.展开更多
At present,the main detection instruments for observing sporadic E(Es)layers are ground-based radars,dense networks of ground-based global navigation satellite system(GNSS)receivers,and GNSS radio occultation,but they...At present,the main detection instruments for observing sporadic E(Es)layers are ground-based radars,dense networks of ground-based global navigation satellite system(GNSS)receivers,and GNSS radio occultation,but they cannot capture the whole picture of the horizontal structure of Es layers.This study employs the Whole Atmosphere Community Climate Model with thermosphere and ionosphere eXtension model(WACCM-X 2.1)to derive the horizontal structure of the ion convergence region(HSICR)to explore the shapes of the large-scale Es layers over East Asia for the period from June 1 to August 31,2008.The simulation produced the various shapes of the HSICRs elongated in the northwest-southeast,northeast-southwest,or composed of individual small patches.The close connection between Es layer critical frequency(foEs)and vertical ion convergence indicates that the HSICR is a good candidate for revealing and explaining the horizontal structure of the large-scale Es layers.展开更多
In this paper, several mathematical models for the large scale structures in some special kinds of mixing layers, which might be practically useful for enhancing the mixing, are proposed. First, the linear growth rate...In this paper, several mathematical models for the large scale structures in some special kinds of mixing layers, which might be practically useful for enhancing the mixing, are proposed. First, the linear growth rate of the large scale structures in the mixing layers was calculated. Then, using the much improved weakly non-linear theory, combined with the energy method, the non-linear evolution of large scale structures in two special mixing layer configurations is calculated. One of the mixing lavers has equal magnitudes of the upstream velocity vectors, while the angles between the velocity vectors and the trailing edge were pi /2 - phi and pi /2 + phi, respectively. The other mixing layer was generated by a splitter-plate with a 45-degree-sweep trailing edge.展开更多
A new computational algorithm is introduced for solving scattering problem in periodic structure. The PML technique is used to deal with the difficulty on truncating the unbounded domain while the DSC algorithm is uti...A new computational algorithm is introduced for solving scattering problem in periodic structure. The PML technique is used to deal with the difficulty on truncating the unbounded domain while the DSC algorithm is utilized for the spatial discretization. The present study reveals that the method is efficient for solving the problem.展开更多
As a multidisciplinary phenomenon,panel aeroelasticity in shock-dominated flow is featured by two primary interactions:Fluid-Structure Interactions(FSIs)and Shock-Boundary Layer Interactions(SBLIs).The former raises s...As a multidisciplinary phenomenon,panel aeroelasticity in shock-dominated flow is featured by two primary interactions:Fluid-Structure Interactions(FSIs)and Shock-Boundary Layer Interactions(SBLIs).The former raises structural concerns,and the latter is of aerodynamic interest.Thus,panel aeroelasticity in shock-dominated flow represents a vital topic for the development and optimization of supersonic vehicles and propulsion systems.This review systematically summarizes recent advances in the methodologies applied to capture structural and fluid dynamics,including theoretical models,numerical simulations,and wind tunnel experiments.The application of data-driven modal decomposition,an advanced technique to extract physically crucial features,on the topic is introduced.From the perspective of FSIs,the distinctive aeroelastic behaviors in shock-dominated flow,including hysteresis phenomena and nonlinear responses,are highlighted.From the perspective of SBLIs,the modifications in their spatial and temporal characteristics imposed by the aeroelastic responses are emphasized.Motivated by the interaction between the shock waves and structural response,different strategies have been proposed to implement aeroelastic suppression and shock control,which have the potential to enhance structural safety and aerodynamic performance in the next generation of high-speed flight vehicles.展开更多
The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction ...The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction is Ni3Si/（T＋γ）/γ/…T/γ/Ni4Zn12Si3/γ/…Ni4Zn12Si3/γ/Ni4Zn12Si3/δ…/Ni4Zn12Si3/δ/liquid-Zn, and the diffusion path in solid-vapor reaction is Ni3Si/θ/（T＋γ）/γ/…/T/γ/…T/γ/vapor-Zn. With increasing Zn diffusion flux, the diffusion reaction path moves toward the Zn-rich direction, and the distance from the Ni3Si substrate to the periodic layer pair nearest to the interface decreases. In the initial stage of both reactions,γphase nucleates and grows within T matrix phase at first, and then conjuncts together to form a band to reduce the surface energy. Based on the experimental results and diffusion kinetics analysis, the microstructure differences were compared and the formation mechanism of the periodic layered structure in Ni3Si/Zn system was discussed.展开更多
Flower-like hierarchical three-dimensional Ni Fe layered double hydroxides hollow microspheres(3D NiFe-LDH HMS),as one kind of novel non-noble metal electrocatalysts,have been fabricated in a templatefree route for wa...Flower-like hierarchical three-dimensional Ni Fe layered double hydroxides hollow microspheres(3D NiFe-LDH HMS),as one kind of novel non-noble metal electrocatalysts,have been fabricated in a templatefree route for water oxidation.Both of the concentration of ammonium fluoride and the reaction time are adjusted to obtain a series of Ni Fe-LDH microspheres,with different internal structures from massive to hollow generated during the hydrothermal treatment,which improve the electrocatalytic activity of the Ni Fe-LDH catalysts towards the evolution reaction of oxygen.The optimized Ni Fe-LDH-0.4M HMS show the excellent OER performance in alkaline electrolyte withη=290 mV@10 mA cm^-2,and a Tafel slope of 51 mV dec-1,which outperforms the benchmark RuO2 catalyst.The possible reason is attributed to the more exposure of active sites,and fast ion transport resulting from the hierarchical hollow structure.展开更多
In this communication, the crystal structure of Cr_4AlB_4, a new MAB phase compound(where M is a transition metal, A is Al or Si, B is boron) discovered in Cr-Al-B system is reported. This new MAB phase was synthesize...In this communication, the crystal structure of Cr_4AlB_4, a new MAB phase compound(where M is a transition metal, A is Al or Si, B is boron) discovered in Cr-Al-B system is reported. This new MAB phase was synthesized from a mixture of CrB and Al powders at 1000?C and its crystal structure was determined by a combination of X-ray diffraction, first-principles calculations and energy dispersive X-ray spectroscopy(EDS). Cr_4AlB_4 crystallizes in an orthorhombic structure with Immm space group. The lattice constants are a = 2.9343(6) ?, b = 18.8911(0) ?, c = 2.9733(7) ?, and the atomic positions are Cr1 at 4 g(0, 0.2936(5),0), Cr2 at 4 h(0.5, 0.5859(7), 0), Al at 2 b(0, 0.5, 0.5), B1 at 4 h(0, 0.3839(8), 0.5) and B2 at 4 g(0.5, 0.6646(2),0.5).展开更多
Wavelet analysis is applied to the results obtained by the direct numerical simulation of a three-dimensional (3D) mixing layer in order to investigate coherent structures in dimension of scale. First, 3D orthonormal ...Wavelet analysis is applied to the results obtained by the direct numerical simulation of a three-dimensional (3D) mixing layer in order to investigate coherent structures in dimension of scale. First, 3D orthonormal wavelet bases are constructed, and the corresponding decomposition algorithm is developed. Then the Navier-Stokes equations are transformed into the wavelet space and the architecture for multi-scale analysis is established. From this architecture, the coarse field images in different scales are obtained and some local statistical quantities are calculated. The results show that, with the development of a mixing layer, the energy spectrum densities for different wavenumbers increase and the energy is transferred from the average flow to vortex structures in different scales. Due to the non-linear interactions between different scales, cascade processes of energy are very complex. Because vortices always roll and pair at special areas, for a definite scale, the energy is obtained from other scales at some areas while it is transferred to other scales at other areas. In addition, energy dissipation and transfer always occur where an intense interaction between vortices exists.展开更多
Dissimilar high-energy beam(HEB)welding is necessary in many industrial applications.Different composition of heat-affected zone(HAZ)and weld metal(WM)lead to variation in mechanical properties within the dissimilar j...Dissimilar high-energy beam(HEB)welding is necessary in many industrial applications.Different composition of heat-affected zone(HAZ)and weld metal(WM)lead to variation in mechanical properties within the dissimilar joint,which determines the performance of the welded structure.In the present study,appropriate filler material was used during electron beam welding(EBW)to obtain a reliable dissimilar joint between reduced-activation ferritic-martensitic(RAFM)steel and 316L austenitic stainless steel.It was observed that the layered structure occurred in the weld metal with 310S filler(310S-WM),which had the inferior resistance to thermal disturbance,leading to severe hardening of 310S-WM after one-step tempering treatment.To further ameliorate the joint inhomogeneity,two-step heat treatment processes were imposed to the joints and optimized.δ-ferrite in the layered structure transformed intoγ-phase in the first-step normalizing and remained stable during cooling.In the second-step of tempering,tempered martensite was obtained in the HAZ of the RAFM steel,while the microstructure of 310S-WM was not affected.Thus,the optimized properties for HAZ and 310S-WM in dissimilar welded joint was both obtained by a two-step heat treatment.The creep failure position of two dissimilar joints both occurred in CLAM-BM.展开更多
The effect of ultrasonic surface rolling process(USRP) as a severe plastic deformation technology was investigated on the evolution of microstructure, residual stress and surface morphology of TB8 alloys with body-cen...The effect of ultrasonic surface rolling process(USRP) as a severe plastic deformation technology was investigated on the evolution of microstructure, residual stress and surface morphology of TB8 alloys with body-centered cubic structure. Stress-controlled rotating-bending fatigue tests indicated increased fatigue strength in USRP samples prepared using different number of passes compared to the base material, which was attributed to the presence of gradient structure surface layers. Five subsequent USRP passes resulted in the highest fatigue strength, due to the optimal surface properties including higher extent of grain refinement, larger compressive residual stresses, "smoother" surface morphology and increased micro-hardness. However, the effect of USRP technology on improving fatigue strength of TB8 alloy was not significant in comparison with that of other titanium alloys(for example, Ti6 Al4 V), which was attributed to the notable surface residual stresses relaxation revealed from measurements on postfatigued USRP samples. Electron backscatter diffraction analysis confirmed that fatigue crack initiation occurred in the larger grains on the surface with high Schmid factor. Small cracks were found to propagate into the core material in a mixed transgranular and intergranular mode. Further analysis indicated that grain growth existed in post-fatigued USRP-treated TB8 samples and that the average geometrically necessary dislocations value reduced after fatigue loading.展开更多
It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites incl...It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites including those inspired by gradient layered materials.In this work,we used LPBF to selectively prepare Ti N/Ti gradient layered structure(GLSTi)composites by using different N_(2)–Ar ratios during the LPBF process.We systematically investigated the mechanisms of in-situ synthesis Ti N,high strength and ductility of GLSTi composites using microscopic analysis,TEM characterization,and tensile testing with digital image correlation.Besides,a digital correspondence was established between the N_(2) concentration and the volume fraction of LPBF in-situ synthesized Ti N.Our results show that the GLSTi composites exhibit superior mechanical properties compared to pure titanium fabricated by LPBF under pure Ar.Specifically,the tensile strength of GLSTi was more than 1.5times higher than that of LPBF-formed pure titanium,reaching up to 1100 MPa,while maintaining a high elongation at fracture of 17%.GLSTi breaks the bottleneck of high strength but low ductility exhibited by conventional nanoceramic particle-strengthened titanium matrix composites,and the hetero-deformation induced strengthening effect formed by the Ti N/Ti layered structure explained its strength-plasticity balanced principle.The microhardness exhibits a jagged variation of the relatively low hardness of 245 HV0.2 for the pure titanium layer and a high hardness of 408 HV0.2 for the N_(2) in-situ synthesis layer.Our study provides a new concept for the structure-performance digital customization of 3D-printed Ti-based composites.展开更多
The influence of pore structure difference on rock electrical characteristics of reservoir and oil reservoir was analyzed taking Triassic Chang 6 reservoir in Block Yanwumao in the middle of Ordos Basin as an example....The influence of pore structure difference on rock electrical characteristics of reservoir and oil reservoir was analyzed taking Triassic Chang 6 reservoir in Block Yanwumao in the middle of Ordos Basin as an example. The relationship between the pore structure difference and the low resistivity oil layer was revealed and demonstrated through core observation, lab experiments, geological research, well log interpretation and trial production etc. The results show that there were two kinds of oil layers in Chang 6 oil layer set, normal oil layer and low resistivity oil layer in the region, corresponding to two types of pore structures, pore type mono-medium and micro-fracture-pore type double-medium; the development of micro-fracture changed greatly the micro-pore structure of the reservoir, and the pore structure difference had an important influence on the rock electrical characteristics of the extra-low permeability sandstone reservoir and oil reservoir; the normal oil layers had obvious characteristics of pore-type mono-medium, and were concentrated in Chang 61, Chang 6232 and Chang 62; the low resistivity oil layers had obvious characteristics of micro-fracture-pore type double-medium, which were mainly distributed in Chang 612 and Chang 63. The mud filtrate penetrated deep into the oil layers along the micro-cracks, leading to sharp reduction of resistivity, and thus low resistivity of the oil layer; the low resistivity oil layers had better storage capacity and higher productivity than the normal oil layers.展开更多
Discontinuous Galerkin（DG） method is known to have several advantages for flow simulations,in particular,in fiexible accuracy management and adaptability to mesh refinement. In the present work,the DG method is deve...Discontinuous Galerkin（DG） method is known to have several advantages for flow simulations,in particular,in fiexible accuracy management and adaptability to mesh refinement. In the present work,the DG method is developed for numerical simulations of both temporally and spatially developing mixing layers. For the temporally developing mixing layer,both the instantaneous fiow field and time evolution of momentum thickness agree very well with the previous results. Shocklets are observed at higher convective Mach numbers and the vortex paring manner is changed for high compressibility. For the spatially developing mixing layer,large-scale coherent structures and self-similar behavior for mean profiles are investigated. The instantaneous fiow field for a three-dimensional compressible mixing layer is also reported,which shows the development of largescale coherent structures in the streamwise direction. All numerical results suggest that the DG method is effective in performing accurate numerical simulations for compressible shear fiows.展开更多
A numerical simulation is performed to find out a key vortical structure in the laminar-turbulent transition. A low-speed streak is generated inside a laminar boundary layer using an isolated cuboid roughness, aimed a...A numerical simulation is performed to find out a key vortical structure in the laminar-turbulent transition. A low-speed streak is generated inside a laminar boundary layer using an isolated cuboid roughness, aimed at providing an environment unstable to outer disturbances. Then, a short duration jet is issued into the boundary layer. When the jet velocity is low, some vortices appear in the boundary layer, but the transition of the boundary layer does not take place.However, when the jet velocity exceeds a certain threshold, two vortices newly appear above the elongated legs of a V-shaped vortex and only one of them is stretched and survives. After that,vortices are generated one after another around the survived one. By comparing the decayed and the survived vortices, it is found that the difference in their heights is the key characteristic which leads to the transition.展开更多
A new layered mixed valence vanadium oxide, [CH 3NH 3] 2[(V ⅣO) 2(V ⅤO 4) 2], which contains interlamellar organic cations was prepared under hydrothermal conditions and its single crystal structure was determined. ...A new layered mixed valence vanadium oxide, [CH 3NH 3] 2[(V ⅣO) 2(V ⅤO 4) 2], which contains interlamellar organic cations was prepared under hydrothermal conditions and its single crystal structure was determined. It crystallizes in a triclinic system with space group P 1, a =0 625 59(8) nm, b =0 639 84(9) nm, c =0 747 19(10) nm, α =78 718(2)°, β =80 099(2)°, γ =77 100(2). The compound contains mixed valence V 4+ /V 5+ vanadium oxide layers constructed from VO 4 tetrahedra, pairs of edge sharing VO 5 square pyramid and methylamine with protonated organic amines occupying the interlayer space.展开更多
The hybridization of metal-organic framework(MOF)with inorganic layers would lead to the discovery of novel hybrid materials that can provide a compelling strategy for enhancing its photocatalytic and electrochemical ...The hybridization of metal-organic framework(MOF)with inorganic layers would lead to the discovery of novel hybrid materials that can provide a compelling strategy for enhancing its photocatalytic and electrochemical response.In the present study,a highly efficient multifunctional hybrid material was developed by exploiting the defective layer formed on AZ31 Mg alloy through plasma electrolytic oxidation(PEO)as a nucleation and growth site for Co-MOF.The concentrations of the organic linker 2-Methylimidazole(2,MIm)and cobalt nitrate as a source of Co^(2+) ions were varied to control the growth of the obtained Co-MOF.Lower concentrations of the 2,MIm ligand favored the formation of leaf-like MOF structures through an anisotropic,two-dimensional growth,while higher concentrations led to rapid,isotropic nucleation and the creation of polyhedral Co-MOF structures.The sample characterized by polyhedral Co-MOF structures exhibited superior electrochemical stability,with the lowest corrosion current density(3.11×10^(-9) A/cm^(2))and the highest top layer resistance(2.34×10^(6)Ωcm^(2)),and demonstrated outstanding photocatalytic efficiency,achieving a remarkable 99.98%degradation of methylene blue,an organic pollutant,in model wastewater.To assess the active adsorption sites of the Co-MOF,density functional theory(DFT)was utilized.This study explores the changes in morphologies of the coatings of Co-MOF with the change of solution concentration to form coatings with enhanced properties on the metallic substrate,which could establish the groundwork for the development of next-generation multifunctional frameworks with diverse applications.展开更多
Experimental studies which focus on flow visualization and the velocity field of a supersonic laminar/turbulent flow over a compression ramp were carried out in a Mach 3.0 wind tunnel. Fine flow structures and velocit...Experimental studies which focus on flow visualization and the velocity field of a supersonic laminar/turbulent flow over a compression ramp were carried out in a Mach 3.0 wind tunnel. Fine flow structures and velocity field structures were obtained via NPLS （nanoparticle-tracer planar laser scattering） and PIV （particle image velocimetry） techniques, time- averaged flow structures were researched, and spatiotemporal evolutions of transient flow structures were analyzed. The flow visualization results indicated that when the ramp angles were 25~, a typical separation occurred in the laminar flow, some typical flow structures such as shock induced by the boundary layer, separation shock, reversed flow and reattachment shock were visible clearly. While a certain extent separation occurred in turbulent flow, the separation region was much smaller. When the ramp angles were 28~, laminar flow separated further, and the separation region expanded evidently, flow structures in the separation region were complex. While a typical separation occurred in turbulent flow, reversed flow structures were significant, flow structures in the separation region were relatively simple. The experimental results of velocity field were corresponding to flow visualization, and the velocity field structures of both compression ramp flows agreed with the flow structures well. There were three layered structures in the U component velocity, and the V component velocity appeared like an oblique ＂v＂. Some differences between these two compression ramp flows can be observed in the velocity profiles of the shear layer and the shearing intensity.展开更多
Using the hydroacoustic method with a 200 kHz scientific echo sounding system, the diel vertical migration （DVM） of the sound-scatteringlayer （SSL） in the Yellow Sea Bottom Cold Water （YSBCW） of the southeastern...Using the hydroacoustic method with a 200 kHz scientific echo sounding system, the diel vertical migration （DVM） of the sound-scatteringlayer （SSL） in the Yellow Sea Bottom Cold Water （YSBCW） of the southeastern Yellow Sea was studied in April （spring） and August （summer） of 2010 and 2011. For each survey, 13-27 hours of acoustic data were continuously collected at a stationary station. The acoustic volume scattering strength （Sv） data were analyzed with temperature profile data. In the spring of both 2010 and 2011, the SSL clearly showed the vertical migration throughout the entire water column, moving from the surface layer at night to near the bottom during the day. Conductivity, temperature, and depth data indicated that the entire water column was well mixed with low temperature of about 8℃. However, the SSL showed different patterns in the summers of 2010 and 2011. In the summer of 2010 （≈28℃ at the surface）, the SSL migrated to near the bottom during the day, but there were two SSLs above and below the thermocline at depth of 10-30 m at night. In the summer of 2011 （≈20℃ at the surface）, the SSL extended throughout the entire water column at night, possibly owing to an abrupt change in sea weather conditions caused by the passage of a Typhoon Muifa over the study area. It was cancluded that the DVM patterns in summer in the YSBCW area may be greatly influenced by a strengthened or weakened thermocline.展开更多
基金supported by the National Natural Science Foundation of China(10972171)the Program for New Century Excellent Talents in Universities(NCET-08-0429)the National 111 Project(B06024)
文摘A three-layer structure model is proposed for investigating the effect of a soft elastic middle layer on the propagation behavior of Love waves in piezoelectric layered systems, with ＂soft＂ implying that the bulk-shear-wave velocity of the middle layer is smaller than that of the upper sensitive layer. Dispersion equations are obtained for unelectroded and traction-free upper surfaces which, in the limit, can be reduced to those for classical Love waves. Systematic parametric studies are subsequently carried out to quantify the effects of the soft middle layer upon Love wave propagation, including its thickness, mass density, dielectric constant and elastic coefficient. It is demonstrated that whilst the thickness and elastic coefficient of the middle layer affect significantly Love wave propagation, its mass density and dielectric constant have negligible influence. On condition that both the thickness and elastic coefficient of the middle layer are vanishingly small so that it degenerates into an imperfectly bonded interface, the three-layer model is also employed to investigate the influence of imperfect interfaces on Love waves propagating in piezoelectric layer/elastic sub- strate systems. Upon comparing with the predictions ob- tained by employing the traditional shear-lag model, the present three-layer structure model is found to be more ac- curate as it avoids the unrealistic displacement discontinuity across imperfectly bonded interfaces assumed by the shearlag model, especially for long waves when the piezoelectric layer is relatively thin.
基金the financial support provided by National Natural Science Foundation of China(Grant Nos.52271338,52371342 and 51979277).
文摘The study aims to explore the damage characteristics and protection technologies of liquid-filled structures under high-speed projectile impact.A series of penetration impact experiments were conducted by focusing on different air layer configurations.By using high-speed camera and dynamic measurement systems,the effects of air layers on the projectile penetration,pressure wave propagation,cavitation evolution,and structural dynamic responses were analyzed.The results showed that the rarefaction wave reflected from the air-liquid interface significantly reduced the peak and specific impulse of the initial pressure wave,thereby diminishing the impact load on the structure.Additionally,the compressibility of air layers also attenuated the cavitation extrusion load.Both front and rear plates exhibited superimposed deformation modes,i.e.,local deformation or petal fracture with global deformation.Air layers effectively mitigated global deformation.However,when the air layer was positioned on the projectile's trajectory,it split the water-entry process and velocity attenuation of the projectile into two relatively independent phases.And the secondary water entry pressure wave caused more severe local deformation and petal fractures on the rear plate.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No.XDA17010207)scholarship received from the China Scholarship Council (CSC) under grant CSC No.202006410017supported by the Fundamental Research Funds for National University,China University of Geosciences (Wuhan)
文摘At present,the main detection instruments for observing sporadic E(Es)layers are ground-based radars,dense networks of ground-based global navigation satellite system(GNSS)receivers,and GNSS radio occultation,but they cannot capture the whole picture of the horizontal structure of Es layers.This study employs the Whole Atmosphere Community Climate Model with thermosphere and ionosphere eXtension model(WACCM-X 2.1)to derive the horizontal structure of the ion convergence region(HSICR)to explore the shapes of the large-scale Es layers over East Asia for the period from June 1 to August 31,2008.The simulation produced the various shapes of the HSICRs elongated in the northwest-southeast,northeast-southwest,or composed of individual small patches.The close connection between Es layer critical frequency(foEs)and vertical ion convergence indicates that the HSICR is a good candidate for revealing and explaining the horizontal structure of the large-scale Es layers.
基金The project supported by the National Natural Science Foundation of China (19642001) and Deutsche Forschungsgemeinschaft (DFG)
文摘In this paper, several mathematical models for the large scale structures in some special kinds of mixing layers, which might be practically useful for enhancing the mixing, are proposed. First, the linear growth rate of the large scale structures in the mixing layers was calculated. Then, using the much improved weakly non-linear theory, combined with the energy method, the non-linear evolution of large scale structures in two special mixing layer configurations is calculated. One of the mixing lavers has equal magnitudes of the upstream velocity vectors, while the angles between the velocity vectors and the trailing edge were pi /2 - phi and pi /2 + phi, respectively. The other mixing layer was generated by a splitter-plate with a 45-degree-sweep trailing edge.
基金Supported by the NNSF of China(10626017)the Science Foundation of the Education Committee of Heilongjiang Province(11511276)the Foundation of Heilongjiang Province(LBH-Q05114).
文摘A new computational algorithm is introduced for solving scattering problem in periodic structure. The PML technique is used to deal with the difficulty on truncating the unbounded domain while the DSC algorithm is utilized for the spatial discretization. The present study reveals that the method is efficient for solving the problem.
基金supported by the National Natural Science Foundation of China(No.12372233)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University,China(No.25GH01020005)the“111 Project”of China(No.B17037)。
文摘As a multidisciplinary phenomenon,panel aeroelasticity in shock-dominated flow is featured by two primary interactions:Fluid-Structure Interactions(FSIs)and Shock-Boundary Layer Interactions(SBLIs).The former raises structural concerns,and the latter is of aerodynamic interest.Thus,panel aeroelasticity in shock-dominated flow represents a vital topic for the development and optimization of supersonic vehicles and propulsion systems.This review systematically summarizes recent advances in the methodologies applied to capture structural and fluid dynamics,including theoretical models,numerical simulations,and wind tunnel experiments.The application of data-driven modal decomposition,an advanced technique to extract physically crucial features,on the topic is introduced.From the perspective of FSIs,the distinctive aeroelastic behaviors in shock-dominated flow,including hysteresis phenomena and nonlinear responses,are highlighted.From the perspective of SBLIs,the modifications in their spatial and temporal characteristics imposed by the aeroelastic responses are emphasized.Motivated by the interaction between the shock waves and structural response,different strategies have been proposed to implement aeroelastic suppression and shock control,which have the potential to enhance structural safety and aerodynamic performance in the next generation of high-speed flight vehicles.
基金Projects(51271040,51171031)supported by the National Natural Science Foundation of ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction is Ni3Si/（T＋γ）/γ/…T/γ/Ni4Zn12Si3/γ/…Ni4Zn12Si3/γ/Ni4Zn12Si3/δ…/Ni4Zn12Si3/δ/liquid-Zn, and the diffusion path in solid-vapor reaction is Ni3Si/θ/（T＋γ）/γ/…/T/γ/…T/γ/vapor-Zn. With increasing Zn diffusion flux, the diffusion reaction path moves toward the Zn-rich direction, and the distance from the Ni3Si substrate to the periodic layer pair nearest to the interface decreases. In the initial stage of both reactions,γphase nucleates and grows within T matrix phase at first, and then conjuncts together to form a band to reduce the surface energy. Based on the experimental results and diffusion kinetics analysis, the microstructure differences were compared and the formation mechanism of the periodic layered structure in Ni3Si/Zn system was discussed.
基金supported by the National Natural Science Foundation of ChinaProgramme XU GuangqiProgram for Changjiang Scholars and Innovative Research Team in University (No. IRT1205)
文摘Flower-like hierarchical three-dimensional Ni Fe layered double hydroxides hollow microspheres(3D NiFe-LDH HMS),as one kind of novel non-noble metal electrocatalysts,have been fabricated in a templatefree route for water oxidation.Both of the concentration of ammonium fluoride and the reaction time are adjusted to obtain a series of Ni Fe-LDH microspheres,with different internal structures from massive to hollow generated during the hydrothermal treatment,which improve the electrocatalytic activity of the Ni Fe-LDH catalysts towards the evolution reaction of oxygen.The optimized Ni Fe-LDH-0.4M HMS show the excellent OER performance in alkaline electrolyte withη=290 mV@10 mA cm^-2,and a Tafel slope of 51 mV dec-1,which outperforms the benchmark RuO2 catalyst.The possible reason is attributed to the more exposure of active sites,and fast ion transport resulting from the hierarchical hollow structure.
基金financial supports from the National Natural Science Foundation of China under grant No.51672064 and No.U1435206
文摘In this communication, the crystal structure of Cr_4AlB_4, a new MAB phase compound(where M is a transition metal, A is Al or Si, B is boron) discovered in Cr-Al-B system is reported. This new MAB phase was synthesized from a mixture of CrB and Al powders at 1000?C and its crystal structure was determined by a combination of X-ray diffraction, first-principles calculations and energy dispersive X-ray spectroscopy(EDS). Cr_4AlB_4 crystallizes in an orthorhombic structure with Immm space group. The lattice constants are a = 2.9343(6) ?, b = 18.8911(0) ?, c = 2.9733(7) ?, and the atomic positions are Cr1 at 4 g(0, 0.2936(5),0), Cr2 at 4 h(0.5, 0.5859(7), 0), Al at 2 b(0, 0.5, 0.5), B1 at 4 h(0, 0.3839(8), 0.5) and B2 at 4 g(0.5, 0.6646(2),0.5).
基金The project supported by the Research Fund for the Doctoral Program of Higher Educationthe National Natural Science Foundation for Outstanding Youth of China (19925210)
文摘Wavelet analysis is applied to the results obtained by the direct numerical simulation of a three-dimensional (3D) mixing layer in order to investigate coherent structures in dimension of scale. First, 3D orthonormal wavelet bases are constructed, and the corresponding decomposition algorithm is developed. Then the Navier-Stokes equations are transformed into the wavelet space and the architecture for multi-scale analysis is established. From this architecture, the coarse field images in different scales are obtained and some local statistical quantities are calculated. The results show that, with the development of a mixing layer, the energy spectrum densities for different wavenumbers increase and the energy is transferred from the average flow to vortex structures in different scales. Due to the non-linear interactions between different scales, cascade processes of energy are very complex. Because vortices always roll and pair at special areas, for a definite scale, the energy is obtained from other scales at some areas while it is transferred to other scales at other areas. In addition, energy dissipation and transfer always occur where an intense interaction between vortices exists.
基金supported financially by the National Magnetic Confinement Fusion Program of China (Nos.2014GB120000 and2014GB104003)the National Natural Science Foundation of China (No.51571026)
文摘Dissimilar high-energy beam(HEB)welding is necessary in many industrial applications.Different composition of heat-affected zone(HAZ)and weld metal(WM)lead to variation in mechanical properties within the dissimilar joint,which determines the performance of the welded structure.In the present study,appropriate filler material was used during electron beam welding(EBW)to obtain a reliable dissimilar joint between reduced-activation ferritic-martensitic(RAFM)steel and 316L austenitic stainless steel.It was observed that the layered structure occurred in the weld metal with 310S filler(310S-WM),which had the inferior resistance to thermal disturbance,leading to severe hardening of 310S-WM after one-step tempering treatment.To further ameliorate the joint inhomogeneity,two-step heat treatment processes were imposed to the joints and optimized.δ-ferrite in the layered structure transformed intoγ-phase in the first-step normalizing and remained stable during cooling.In the second-step of tempering,tempered martensite was obtained in the HAZ of the RAFM steel,while the microstructure of 310S-WM was not affected.Thus,the optimized properties for HAZ and 310S-WM in dissimilar welded joint was both obtained by a two-step heat treatment.The creep failure position of two dissimilar joints both occurred in CLAM-BM.
基金the support of National Natural Science Foundation of China(51771155)National Science and Technology Major Project(2017-VII-0012-0107)Equipment Pre-research Field Fund(61409220202)。
文摘The effect of ultrasonic surface rolling process(USRP) as a severe plastic deformation technology was investigated on the evolution of microstructure, residual stress and surface morphology of TB8 alloys with body-centered cubic structure. Stress-controlled rotating-bending fatigue tests indicated increased fatigue strength in USRP samples prepared using different number of passes compared to the base material, which was attributed to the presence of gradient structure surface layers. Five subsequent USRP passes resulted in the highest fatigue strength, due to the optimal surface properties including higher extent of grain refinement, larger compressive residual stresses, "smoother" surface morphology and increased micro-hardness. However, the effect of USRP technology on improving fatigue strength of TB8 alloy was not significant in comparison with that of other titanium alloys(for example, Ti6 Al4 V), which was attributed to the notable surface residual stresses relaxation revealed from measurements on postfatigued USRP samples. Electron backscatter diffraction analysis confirmed that fatigue crack initiation occurred in the larger grains on the surface with high Schmid factor. Small cracks were found to propagate into the core material in a mixed transgranular and intergranular mode. Further analysis indicated that grain growth existed in post-fatigued USRP-treated TB8 samples and that the average geometrically necessary dislocations value reduced after fatigue loading.
基金supported by the Guangdong Basic and Applied Basic Research Foundation (2020B1515120013,2022B1515120066)National Natural Science Foundation of China (Nos.U2001218, 51875215)+1 种基金Key-Area Research and Development Program of Guangdong Province (2020B090923001)Special Support Foundation of Guangdong Province (No.2019TQ05Z110)。
文摘It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites including those inspired by gradient layered materials.In this work,we used LPBF to selectively prepare Ti N/Ti gradient layered structure(GLSTi)composites by using different N_(2)–Ar ratios during the LPBF process.We systematically investigated the mechanisms of in-situ synthesis Ti N,high strength and ductility of GLSTi composites using microscopic analysis,TEM characterization,and tensile testing with digital image correlation.Besides,a digital correspondence was established between the N_(2) concentration and the volume fraction of LPBF in-situ synthesized Ti N.Our results show that the GLSTi composites exhibit superior mechanical properties compared to pure titanium fabricated by LPBF under pure Ar.Specifically,the tensile strength of GLSTi was more than 1.5times higher than that of LPBF-formed pure titanium,reaching up to 1100 MPa,while maintaining a high elongation at fracture of 17%.GLSTi breaks the bottleneck of high strength but low ductility exhibited by conventional nanoceramic particle-strengthened titanium matrix composites,and the hetero-deformation induced strengthening effect formed by the Ti N/Ti layered structure explained its strength-plasticity balanced principle.The microhardness exhibits a jagged variation of the relatively low hardness of 245 HV0.2 for the pure titanium layer and a high hardness of 408 HV0.2 for the N_(2) in-situ synthesis layer.Our study provides a new concept for the structure-performance digital customization of 3D-printed Ti-based composites.
基金Supported by the Natural Science Foundation of Shaanxi Province,China(2010JM5003)
文摘The influence of pore structure difference on rock electrical characteristics of reservoir and oil reservoir was analyzed taking Triassic Chang 6 reservoir in Block Yanwumao in the middle of Ordos Basin as an example. The relationship between the pore structure difference and the low resistivity oil layer was revealed and demonstrated through core observation, lab experiments, geological research, well log interpretation and trial production etc. The results show that there were two kinds of oil layers in Chang 6 oil layer set, normal oil layer and low resistivity oil layer in the region, corresponding to two types of pore structures, pore type mono-medium and micro-fracture-pore type double-medium; the development of micro-fracture changed greatly the micro-pore structure of the reservoir, and the pore structure difference had an important influence on the rock electrical characteristics of the extra-low permeability sandstone reservoir and oil reservoir; the normal oil layers had obvious characteristics of pore-type mono-medium, and were concentrated in Chang 61, Chang 6232 and Chang 62; the low resistivity oil layers had obvious characteristics of micro-fracture-pore type double-medium, which were mainly distributed in Chang 612 and Chang 63. The mud filtrate penetrated deep into the oil layers along the micro-cracks, leading to sharp reduction of resistivity, and thus low resistivity of the oil layer; the low resistivity oil layers had better storage capacity and higher productivity than the normal oil layers.
基金supported by the National Natural Science Foundation of China (90716008,10572004 and 10921202)MOST 973 Project (2009CB724100) and CSSA
文摘Discontinuous Galerkin（DG） method is known to have several advantages for flow simulations,in particular,in fiexible accuracy management and adaptability to mesh refinement. In the present work,the DG method is developed for numerical simulations of both temporally and spatially developing mixing layers. For the temporally developing mixing layer,both the instantaneous fiow field and time evolution of momentum thickness agree very well with the previous results. Shocklets are observed at higher convective Mach numbers and the vortex paring manner is changed for high compressibility. For the spatially developing mixing layer,large-scale coherent structures and self-similar behavior for mean profiles are investigated. The instantaneous fiow field for a three-dimensional compressible mixing layer is also reported,which shows the development of largescale coherent structures in the streamwise direction. All numerical results suggest that the DG method is effective in performing accurate numerical simulations for compressible shear fiows.
文摘A numerical simulation is performed to find out a key vortical structure in the laminar-turbulent transition. A low-speed streak is generated inside a laminar boundary layer using an isolated cuboid roughness, aimed at providing an environment unstable to outer disturbances. Then, a short duration jet is issued into the boundary layer. When the jet velocity is low, some vortices appear in the boundary layer, but the transition of the boundary layer does not take place.However, when the jet velocity exceeds a certain threshold, two vortices newly appear above the elongated legs of a V-shaped vortex and only one of them is stretched and survives. After that,vortices are generated one after another around the survived one. By comparing the decayed and the survived vortices, it is found that the difference in their heights is the key characteristic which leads to the transition.
基金Supported by the National Natural Science Foundation of China(No.2 0 1710 10 )
文摘A new layered mixed valence vanadium oxide, [CH 3NH 3] 2[(V ⅣO) 2(V ⅤO 4) 2], which contains interlamellar organic cations was prepared under hydrothermal conditions and its single crystal structure was determined. It crystallizes in a triclinic system with space group P 1, a =0 625 59(8) nm, b =0 639 84(9) nm, c =0 747 19(10) nm, α =78 718(2)°, β =80 099(2)°, γ =77 100(2). The compound contains mixed valence V 4+ /V 5+ vanadium oxide layers constructed from VO 4 tetrahedra, pairs of edge sharing VO 5 square pyramid and methylamine with protonated organic amines occupying the interlayer space.
基金supported by the National Research Foundation of Korea(NRF)funded by the Korean government(MSIT)(No.2022R1A2C1006743).
文摘The hybridization of metal-organic framework(MOF)with inorganic layers would lead to the discovery of novel hybrid materials that can provide a compelling strategy for enhancing its photocatalytic and electrochemical response.In the present study,a highly efficient multifunctional hybrid material was developed by exploiting the defective layer formed on AZ31 Mg alloy through plasma electrolytic oxidation(PEO)as a nucleation and growth site for Co-MOF.The concentrations of the organic linker 2-Methylimidazole(2,MIm)and cobalt nitrate as a source of Co^(2+) ions were varied to control the growth of the obtained Co-MOF.Lower concentrations of the 2,MIm ligand favored the formation of leaf-like MOF structures through an anisotropic,two-dimensional growth,while higher concentrations led to rapid,isotropic nucleation and the creation of polyhedral Co-MOF structures.The sample characterized by polyhedral Co-MOF structures exhibited superior electrochemical stability,with the lowest corrosion current density(3.11×10^(-9) A/cm^(2))and the highest top layer resistance(2.34×10^(6)Ωcm^(2)),and demonstrated outstanding photocatalytic efficiency,achieving a remarkable 99.98%degradation of methylene blue,an organic pollutant,in model wastewater.To assess the active adsorption sites of the Co-MOF,density functional theory(DFT)was utilized.This study explores the changes in morphologies of the coatings of Co-MOF with the change of solution concentration to form coatings with enhanced properties on the metallic substrate,which could establish the groundwork for the development of next-generation multifunctional frameworks with diverse applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.11172326 and 11302256)
文摘Experimental studies which focus on flow visualization and the velocity field of a supersonic laminar/turbulent flow over a compression ramp were carried out in a Mach 3.0 wind tunnel. Fine flow structures and velocity field structures were obtained via NPLS （nanoparticle-tracer planar laser scattering） and PIV （particle image velocimetry） techniques, time- averaged flow structures were researched, and spatiotemporal evolutions of transient flow structures were analyzed. The flow visualization results indicated that when the ramp angles were 25~, a typical separation occurred in the laminar flow, some typical flow structures such as shock induced by the boundary layer, separation shock, reversed flow and reattachment shock were visible clearly. While a certain extent separation occurred in turbulent flow, the separation region was much smaller. When the ramp angles were 28~, laminar flow separated further, and the separation region expanded evidently, flow structures in the separation region were complex. While a typical separation occurred in turbulent flow, reversed flow structures were significant, flow structures in the separation region were relatively simple. The experimental results of velocity field were corresponding to flow visualization, and the velocity field structures of both compression ramp flows agreed with the flow structures well. There were three layered structures in the U component velocity, and the V component velocity appeared like an oblique ＂v＂. Some differences between these two compression ramp flows can be observed in the velocity profiles of the shear layer and the shearing intensity.
基金The China-Korea cooperative project"The study on the impact of the Yellow Sea Cold Water Mass to the ecosystem"under contract No.PE99165promoted by the Korea Institute of Ocean Science and Technology
文摘Using the hydroacoustic method with a 200 kHz scientific echo sounding system, the diel vertical migration （DVM） of the sound-scatteringlayer （SSL） in the Yellow Sea Bottom Cold Water （YSBCW） of the southeastern Yellow Sea was studied in April （spring） and August （summer） of 2010 and 2011. For each survey, 13-27 hours of acoustic data were continuously collected at a stationary station. The acoustic volume scattering strength （Sv） data were analyzed with temperature profile data. In the spring of both 2010 and 2011, the SSL clearly showed the vertical migration throughout the entire water column, moving from the surface layer at night to near the bottom during the day. Conductivity, temperature, and depth data indicated that the entire water column was well mixed with low temperature of about 8℃. However, the SSL showed different patterns in the summers of 2010 and 2011. In the summer of 2010 （≈28℃ at the surface）, the SSL migrated to near the bottom during the day, but there were two SSLs above and below the thermocline at depth of 10-30 m at night. In the summer of 2011 （≈20℃ at the surface）, the SSL extended throughout the entire water column at night, possibly owing to an abrupt change in sea weather conditions caused by the passage of a Typhoon Muifa over the study area. It was cancluded that the DVM patterns in summer in the YSBCW area may be greatly influenced by a strengthened or weakened thermocline.
