Ce-doped nanosized ZnO desulfurizer was prepared by homogeneous precipitation,and its desulfurization efficiency at ambient temperature was investigated through dynamic experiments.The results showed that the desulfur...Ce-doped nanosized ZnO desulfurizer was prepared by homogeneous precipitation,and its desulfurization efficiency at ambient temperature was investigated through dynamic experiments.The results showed that the desulfurization activity of nanosized Ce-ZnO had improved greatly,compared to nanosized ZnO desulfurizer.Nanosized Ce-ZnO desulfurizer was characterized by XRD,TPD-MS,XPS,and TEM.The research results indicated that doping Ce decreased the particle size of the nanosized ZnO desulfurizer and ZnS was the principal desulfurization product.There were adsorption complexes of HS and S on the surface of desulfurizer as well.Only a small amount of vapor appeared in the tail gas on the condition of meeting the precision of desulfurization.展开更多
CaO-Al2O3-SiO2-CaF2-MgO was selected as the slag system for desulfurization in LF process.The reaction between steel and slag during desulfurization has been simulated by using Factsage software to study the influence...CaO-Al2O3-SiO2-CaF2-MgO was selected as the slag system for desulfurization in LF process.The reaction between steel and slag during desulfurization has been simulated by using Factsage software to study the influence of component on the sulfur distribution ratio.In order to research the influence of CaO content,aluminum powder content and its granularity on desulfurization,laboratory experiments have been carried out in a 200 kg inductive furnace.Results showed that the optimal composition of deep desulfurizer is wCaO=64% and aluminium powder 10% with a granularity of 30 μm.Industrial trials showed that the main composition range of final slag in LF process is wCaO=53.0%-57.0%,wAl2O3=23.4%-25.1%,wSiO2=8.1%-10.0%,and wCaF2=3.2%-4.7%.The sulfur mass percent in steel is lower than 0.0008% with a desulfurization rate above 89%.According to the result of industrial production,this desulfurizer could meet the production requirement for ultra-low sulfur steel,of which sulfur mass percent is under 0.0015%展开更多
Low desulfurization efficiency impedes the wide application of dry desulfurization technology,which is a low-cost and simple process,and one significant solution is the development and manufacture of high-performance ...Low desulfurization efficiency impedes the wide application of dry desulfurization technology,which is a low-cost and simple process,and one significant solution is the development and manufacture of high-performance desulfurizers.In this study,firstly,a steam jet mill was used to digest quicklime;then,we utilized numerical simulation to study the flow field distribution and analyze the driving factors of quicklime digestion;and lastly,the desulfurization performance of the desulfurizer was evaluated under different relative humidities.The results show that the desulfurizer prepared via the steam jet mill had better apparent activity than traditional desulfurizers.Also,the entire jet flow field of the steam jet mill is in a supersonic and highly turbulent flow state,with high crushing intensity and good particle acceleration performance.Sufficient contact with the nascent surface maximizes the formation of slaked lime.The experiments demonstrated that the operating time with 100%desulfurization efficiency and the“break-through”time for the desulfurizer prepared via the steam jet mill is longer than that of traditional desulfurizers,and has significant advantages,especially at low flue gas relative humidity.Compared with traditional desulfurizers,the desulfurizer prepared via steam jet mill expands the range of acceptable flue gas temperature,and the failure temperature is 1.625 times that of traditional desulfurizers.This work breaks through the technical bottleneck of low dry desulfurization efficiency,which is an important step in pushing forward the application of dry desulfurization.展开更多
In this experiment,an EG/ChCl deep eutectic solvent(DES)was synthesized using choline chloride(ChCl)and ethylene glycol(EG)as the raw materials.The synthesized DES was characterized by Fourier transform infrared spect...In this experiment,an EG/ChCl deep eutectic solvent(DES)was synthesized using choline chloride(ChCl)and ethylene glycol(EG)as the raw materials.The synthesized DES was characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis.The results demonstrate the successful synthesis of DES.A certain amount of FeCl_(3) and CuSO_(4) was added to the DES to promote the absorption of H_(2)S;thus,a Fe(Ⅲ)-Cu(Ⅱ)coupled DES desulfurization system was obtained.The effects of DES raw materials’ratio,FeCl_(3) concentration,water content,CuSO_(4) concentration,and reaction temperature on the desulfurization efficiency and the regeneration conditions were studied.The results show that ChCl/EG DES with a molar ratio of 1:2 has a better desulfurization effect,and the addition of an appropriate amount of water can effectively promote the dissolution of CuSO_(4) and the absorption of H_(2)S.An appropriate increase in reaction temperature and CuSO_(4) concentration would also promote the absorption of H_(2)S.When the concentration of CuSO_(4) in DES desulfurizer was 0.15 mol/L,the gas speed was 20 mL/min,and the sulfur capacity could reach 10.23 g/L.The desulfurizer could be regenerated by passing O_(2),and the desulfurization efficiency did not change much after repeated use of desulfurization-regeneration many times.The desulfurization product was characterized by XRD as rhombohedral sulfur.展开更多
This paper has investigated a new desulfurizer for iron and steel industry to make up the lackness of magnesium-based desulfurizer. In order to explore the desulfurization process of hot metal by the new desulfurizer,...This paper has investigated a new desulfurizer for iron and steel industry to make up the lackness of magnesium-based desulfurizer. In order to explore the desulfurization process of hot metal by the new desulfurizer, both the thermodynamics and experiments have been studied.. The results of thermodynamics indicated that, under the standard condition,the lowest reaction temperatures of MgO + C and MgO +Si were 1846℃ and 2132℃ and the pressure of Mg vapor at the hot metal temperature were 0.2-0.5kPa and 0.005-0.01kPa, respectively. In the case of reaction between MgO and Al, the calculated starting reaction temperature under standard condition was 1475 ℃, and the pressure of Mg vapor was distributed from 27 kPa to 45kPa at the hot metal temperature, showing that it was easy to happen the reaction of MgO+Al. The experimental results displayed that the desulfurization efficiency was only 42.31% by the desulfurizer of MgO and C, while the effect of MgO+ Al and MgO+ Al-Si was good, since the desulfurization efficiencies were above 85%, and the lowest sulfur content was below 40×10-6.展开更多
Sulfur dioxide is one of the major pollutants resulting from fuel combustion. In this study, CaO and attapulgite were utilized as raw material for synthesizing CaO/attapulgite (CaO/ATP) desulfurizer. The physicochemic...Sulfur dioxide is one of the major pollutants resulting from fuel combustion. In this study, CaO and attapulgite were utilized as raw material for synthesizing CaO/attapulgite (CaO/ATP) desulfurizer. The physicochemical characteristics of CaO/ATP desulfurizer were evaluated by various techniques such as XRD, SEM, FT-IR. The performance of samples was studied in dynamic conditions. Major factors affecting on desulfurization such as weight ratio of CaO to total, types of modifiers, roasting time and temperature were investigated. The desulfurization agent synthesized under optimal synthesis conditions with CaO content of 30 wt% and NaOH modifier, and the desulfurization roasting time of 2 hours and roasting temperature of 600°C, exhibit sulfur tolerance of 10.15 wt%. This desulfurizer with excellent absorbency and catalysis of desulfurization, economical and?environment-friendly, could be especially useful in industrial applications.展开更多
The compound nano-ZnO modified with Ce was prepared by homogeneous precipitation.IR,XRD and dynamic experiments show that the crystal size of nano-ZnO desulfurizer is decreased after being modified with Ce and its des...The compound nano-ZnO modified with Ce was prepared by homogeneous precipitation.IR,XRD and dynamic experiments show that the crystal size of nano-ZnO desulfurizer is decreased after being modified with Ce and its desulfurization activities are improved greatly.When calcined at 270 ℃,Ce distributes evenly on the ZnO particle surface as amorphous state oxides,and the amorphous ZnO·H2O also exists;when the calcining temperature is 570 ℃,the crystal CeO2 separates out and the amorphous structure of zinc oxide disappears,at the same time,the crystal is perfect and its size increases,but the desulfurization activities decrease.The desulfurization product of nano-ZnO modified with Ce was analyzed with XPS.The results show that the adsorption compound of HS,S and ZnS exists on the surface of the desulfurizer.展开更多
Catalytic oxidation desulfurization(CODS)technology has shown great promise for diesel desulfurization by virtue of its low cost,mild reaction conditions,and superior desulfurization performance.Herein,a series of FeM...Catalytic oxidation desulfurization(CODS)technology has shown great promise for diesel desulfurization by virtue of its low cost,mild reaction conditions,and superior desulfurization performance.Herein,a series of FeMoO_(x)/LaTiO_(y)-z samples with diverse Fe/Mo ratios were prepared via a facile citric acid-assisted method.The impact of Fe incorporation on the dispersion and surface elemental states of Mo species,as well as oxygen species content of the synthesized FeMoO_(x)/LaTiO_(y)-z catalysts were systematically characterized using TEM,BET,UV-vis DRS,XPS,XANES,and reaction kinetics,and their CODS performances were examined for 4,6-DMDBT removal.Experimental results demonstrated that Fe/Mo ratio significantly affected the Ti−O bond strength,surface dispersion and electronic structure of Mo O_(2)species on FeMoO_(x)/LaTiO_(y)-z catalysts.FeMoO_(x)/LaTiO_(y)-2 catalyst showed outstanding cycling durability and the best CODS performance with almost 100%removal of 4,6-DMDBT from model oil within 75 min due to its proper MoO3 dispersion,optimal redox property,and the most oxygen vacancy concentration.Nevertheless,further enhancing Fe content led to the increased dispersion of Mo species,while the decrease active Mo species as well as the increase of steric effect for 4,6-DMDBT accessing to the catalytic reactive sites considerably increase the apparent activation energy of FeMoO_(x)/LaTiO_(y)-z(z>2)catalysts during the CODS process,thereby seriously suppressing their CODS performances.Moreover,Radical trapping experiments reveal that the·,generated by the activation of O_(2)at the active sites,catalytic oxidized 4,6-DMDBT to the product of 4,6-DMDBTO_(2),thereby enabling both deep desulfurization and recovery of high-value 4,6-DMDBTO_(2).These findings offer an alternative strategy to achieve ultra deep desulfurization as well as separate and recover high economic value sulfone substances from diesel.展开更多
The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The result...The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The results showed that,the copper grade of the concentrate obtained from seawater flotation decreased to 24.30%,compared to 24.60%in DI water.Concurrently,the recovery of chalcopyrite decreased from 51.39%to 38.67%,while the selectivity index(SI)also had a reduction from 2.006 to 1.798.The incorporation of ethylene diamine tetraacetic acid(EDTA),sodium silicate(SS),and sodium hexametaphosphate(SHMP)yielded an enhancement in the SI value,elevating it from 1.798 to 1.897,2.250 and 2.153,separately.It is particularly noteworthy that an excess of EDTA resulted in a SI value of merely 1.831.The mechanism of action was elucidated through analysis of surface charge measurements,X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),extended Derjaguin-Landau Verwey-Overbeek(E-DLVO)theory,and density functional theory(DFT)calculations.展开更多
In petroleum,mercaptan impurities generate malodorous fumes that pose risks to both human health and the environment,and leading to substandard oil quality.Lye desulfurization is a widely employed technique for elimin...In petroleum,mercaptan impurities generate malodorous fumes that pose risks to both human health and the environment,and leading to substandard oil quality.Lye desulfurization is a widely employed technique for eliminating mercaptans from oil.In traditional scrubber towers,lye and oil are poorly mixed,the desulfurization efficiency is low,and the lye consumption is high.To enhance washing efficiency,a droplet micromixer and corresponding fiber coalescence separator were developed.By optimizing the structure and operating parameters,more effective mixing and separation were achieved,and both caustic washing and desulfurization were enhanced.The proposed mixer/separator outperforms the industry standard by reducing the caustic loading by 30%and offers superior economic and engineering performances.The results of this study offer a direction for designing and optimizing a mercaptan removal unit to enhance the scrubbing effectiveness and decrease expenses to achieve more efficient and green production process.展开更多
The development of highly active functionalized ionic liquids(ILs)as both extractants and catalysts for use in achieving deep desulfurization continues to pose challenges.In this study,a highly efficient oxidative des...The development of highly active functionalized ionic liquids(ILs)as both extractants and catalysts for use in achieving deep desulfurization continues to pose challenges.In this study,a highly efficient oxidative desulfurization system was constructed,composed of dual-acidic ionic liquids(DILs)and H_(2)O_(2)-AcOH.The investigation results of four DILs prepared from different metal chlorides([HSO_(3)C_(3)NEt_(3)]Cl-MnCl_(n),MnCl_(n)=AlCl_(3),ZnCl_(2),CuCl_(2),FeCl_(3))in oxidative desulfurization showed that[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3)had an outstanding catalytic effect and significantly promoted the oxidation of sulfides.With a 0.2 g[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3),the removal rate of dibenzothiophene(DBT)reached 100%in 10 mL model oil under mild conditions at 55℃for 20 min.The key is its ability to induce the dismutation of su-peroxide anions(·O_(2)^(-)),which facilitates the generation of singlet oxygen(1 O_(2)).The efficient oxidation of DBT is accomplished through a predominantly^(1)O_(2)-mediated_(n)on-radical mechanism.[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3)serves as a favorable medium for contact to be made between^(1)O_(2)and sulfides,which indicates an efficient catalytic-adsorption synergy.展开更多
With the acceleration of industrialization,the pollution problem of sulfur dioxide(SO_(2))emitted from coal-fired power plants has become increasingly severe.Although wet flue gas desulfurization(FGD)technology can re...With the acceleration of industrialization,the pollution problem of sulfur dioxide(SO_(2))emitted from coal-fired power plants has become increasingly severe.Although wet flue gas desulfurization(FGD)technology can remove about 95%of SO_(2),its high energy consumption and the corrosion risk of downstream equipment caused by residual SO_(2)(500–3000 ppm)still need to be addressed[1].Previous porous materials(such as MOFs)achieve selective adsorption of SO_(2) through open metal sites,M–OH sites or functional organic groups,but the problem of CO_(2) co-adsorption limits their practical application[2].In recent years,hydrogen-bonded organic frameworks(HOFs)have emerged as a research hotspot due to their reversible hydrogen-bonding networks and flexible structures[3],but their stability under extreme conditions and efficient separation performance still need to be improved[4].展开更多
The development of an efficient dual-function catalytic-sorption system,which seamlessly integrates reaction and separation into a single step for extractant-free systems,represents a transformative advancement in oxi...The development of an efficient dual-function catalytic-sorption system,which seamlessly integrates reaction and separation into a single step for extractant-free systems,represents a transformative advancement in oxidative desulfurization(ODS)process.In this work,we introduce a novel dualfunction amphiphilic biochar(Mo/CBC)catalyst,functionalized with MoO_(3-x)featuring abundant oxygen vacancies,for highly effective extractant-free ODS.The polarity of the biochar was precisely tailored by varying the amount of KOH,leading to the creation of amphiphilic carriers.Subsequent ball milling facilitated the successful loading of MoO_(3-x)onto the biochar surface via an impregnation-calcination route leveraging carbon reduction,resulting in the synthesis of amphiphilic Mo/CBC catalysts.The amphiphilic nature of these catalysts ensures their stable dispersion within the oil phase,while also facilitating their interaction with the oxidant H2O2 and the adsorption of sulfur-containing oxidation products.Characterization techniques,including EPR,XPS,and in situ XRD,verified the existence of abundant oxygen vacancies obtained by carbon reduction on the amphiphilic Mo/CBC catalysts,which significantly boosted their activity in an extractant-free ODs system.Remarkably,the amphiphilic Mo/CBC catalyst displayed exceptional catalytic performance,achieving a desulfurization efficiency of 99.6%in just 10 min without extraction solvent.DFT theoretical calculations further revealed that H_(2)O_(2)readily dissociates into two OH radicals on the O_(vac)-MoO_(3),overcoming a low energy barrier.This process was identified as a key contributor to the catalyst's outstanding ODS performance.Furthermore,other biochar sources,such as rice straw,bamboo,rapeseed oil cake,and walnut oil cake,were investigated to produce Mo-based amphiphilic biochar catalysts,which all showed excellent desulfurization performance.This work establishes a versatile and highly efficient dual-function catalytic-sorption system by designing amphiphilic biochar catalysts enriched with oxygen vacancies,paving the way for the development of universally applicable ODS catalysts for industrial applications.展开更多
As a pyrometallurgical process,circulating fluidized bed(CFB) roasting has good potential for application in desulfurization of high-sulfur bauxite.The gas-solid distribution and reaction during CFB roasting of high-s...As a pyrometallurgical process,circulating fluidized bed(CFB) roasting has good potential for application in desulfurization of high-sulfur bauxite.The gas-solid distribution and reaction during CFB roasting of high-sulfur bauxite were simulated using the computational particle fluid dynamics(CPFD) method.The effect of primary air flow velocity on particle velocity,particle volume distribution,furnace temperature distribution and pressure distribution were investigated.Under the condition of the same total flow of natural gas,the impact of the number of inlets on the desulfurization efficiency,atmosphere mass fraction distribution and temperature distribution in the furnace was further investigated.展开更多
For the treatment of the mixed flue gas desulfurization wastewater with high salinity by the biological fluidized bed process,the optimum temperature was 25-35℃,and the optimum hydraulic retention time was 10 h.When ...For the treatment of the mixed flue gas desulfurization wastewater with high salinity by the biological fluidized bed process,the optimum temperature was 25-35℃,and the optimum hydraulic retention time was 10 h.When the influent quality was stable,the average concentration of COD,NH_(4)^(+)-N and TN in the inlet water was 210,11 and 16.3 mg/L,respectively,and their average concentration in the effluent was 54,0.32 and 4.09 mg/L,respectively.The treatment effect was good.When the incoming water quality of flue gas desulfurization wastewater fluctuated greatly,the effluent quality was still relatively stable after being treated by the biological fluidized bed,indicating that the biological fluidized bed process had a good ability to resist the impact of water quality in the treatment of high-salinity flue gas desulfurization wastewater.At the same time,the biological fluidized bed process provides a reference for high-salinity wastewater that is difficult to be biologically treated.展开更多
Desulfurization technology is rather difficult and urgently needed for carbon dioxide(CO_(2))utilization in industry.A new Cu(I)-based adsorbent was synthesized and examined for the capacity of removing carbonyl sulfi...Desulfurization technology is rather difficult and urgently needed for carbon dioxide(CO_(2))utilization in industry.A new Cu(I)-based adsorbent was synthesized and examined for the capacity of removing carbonyl sulfide(COS)from a CO_(2)stream in an effort to solve the competitive adsorption between CO_(2)and COS and to seek opportunity to advance adsorption capacity.A wide range of character-ization techniques were used to investigate the physicochemical properties of the synthesized Cu(I)adsorbent featuringπ-complexation and their correlations with the adsorption performance.Meanwhile,the first principal calculation software CP2K was used to develop an understanding of the adsorption mechanism,which can offer useful guidance for the adsorbent regeneration.The synthesized Cu(I)adsorbent,prepared by using copper citrate and citric acid on the ZSM-5(SiO_(2)/Al_(2)O_(3)=25)carrier,outperformed other adsorbents with varying formulations and carriers in adsorption capacities.Through optimization of the preparation and adsorption conditions for various adsorbents,the breakthrough adsorption capacity(Qb)for COS was further enhanced from 2.19 mg/g to 15.36 mg/g.The formed stableπ-complex bonds between COS and Cu(I),as confirmed by density func-tional theory calculations,were verified by the significant improvement in the adsorption capacity after regeneration at 600°C.The above advantages render the novel synthesized Cu(I)adsorbent a promising candidate featuring cost-effectiveness,high efficacy and good regenerability for desulfurization from a CO_(2)stream.展开更多
Development of clean desulfurization process that combines both efficient and environmentally friendly remains a significant challenge for diesel production.The photocatalytic oxidation desulfurization technology is r...Development of clean desulfurization process that combines both efficient and environmentally friendly remains a significant challenge for diesel production.The photocatalytic oxidation desulfurization technology is regarded as a promising process depending on the superior electron transfer and visible light utilization of photocatalyst.Herein,the nonstoichiometry MoO_(3-x)with outstanding photoresponse ability is prepared and modified by imidazole-based ionic liquid[C_(12)mim]Cl to upgrade electronic structure.The interface H-bonding between MoO_(3-x)and[C_(12)mim]Cl regard as electronic transfer channel and the recombination of e^(-)-h^(+)pairs is effectively inhibited with the modification of[C_(12)mim]Cl.Deep desulfurization rate of 96.6%can be reached within 60 min and the MoO_(3-x)/[C_(12)mim]Cl(MoC_(12))photocatalyst demonstrated outstanding cyclic stability within 7 cycles in an extraction coupled photocatalytic oxidation desulfurization(ECPODS)system.The study provides a new perspective on enhancing photocatalytic desulfurization through defect engineering and surface modification.展开更多
Practical applications of desulfurization gypsum are limited owing to its brittleness and low strength.To overcome these challenges,researchers have developed engineered desulfurization gypsum composites(EDGCs)by inco...Practical applications of desulfurization gypsum are limited owing to its brittleness and low strength.To overcome these challenges,researchers have developed engineered desulfurization gypsum composites(EDGCs)by incorporating ultrahigh molecular weight polyethylene(UHMWPE)fiber and sulfoaluminate cement(SAC).The mix ratio was optimized using response surface methodology(RSM).Experimental testing of EDGC under compressive and tensile loads led to the creation of a regression model that investigates the influence of variables and their interactions on the material’s compressive and tensile strengths.Additionally,microscopic morphology and hydration product composition were analyzed to explore the influence mechanism.The results indicated that EDGC’s compressive strength increased by up to 38.4%owing to a decreased water-binder ratio and higher SAC content.Similarly,tensile strength increased by up to 38.6%owing to increased SAC and fiber content.Moreover,EDGC demonstrated excellent strain-hardening behavior and multiple cracking characteristics,achieving a maximum tensile strain of nearly 3%.The research findings provide valuable insights for optimizing the performance of desulfurization gypsum.展开更多
A series of functional,tungsten-containing mesoporous silica materials（W-SiO2） have been fabricated directly from an ionic liquid that contained imidazole and polyoxometalate,which acted as mesoporous template and m...A series of functional,tungsten-containing mesoporous silica materials（W-SiO2） have been fabricated directly from an ionic liquid that contained imidazole and polyoxometalate,which acted as mesoporous template and metal source respectively.These materials were then characterized through X-ray diffraction（XRD）,transmission electron microscopy（TEM）,Raman spectroscopy,Fourier transform infrared spectra（FTIR）,diffuse reflectance spectra（DRS）,and N2 adsorption-desorption,which were found to contain tungsten species that were effectively dispersed throughout the structure.The as-prepared materials W-SiO2 were also found to possess a mesoporous structure.The pore diameters of the respective sample W-SiO2-20 determined from the TEM images ranged from 2 to 4 nm,which was close to the average pore size determined from the nitrogen desorption isotherm（2.9 nm）.The materials were evaluated as catalysts for the heterogeneous oxidative desulfurization of dibenzothiophene（DBT）,which is able to achieve deep desulfurization within 40 min under the optimal conditions（Catalyst（W-SiO2-20）= 0.01 g,temperature = 60℃,oxidant（H2O2）= 20 μL）.For the removal of different organic sulfur compounds within oil,the ability of the catalyst（W-SiO2-20） under the same conditions to remove sulfur compounds decreased in the order：4,6-dimethyldibenzothiophene Dibenzothiophene Benzothiophene 1-dodecanethiol.Additionally,they did not require organic solvents as an extractant in the heterogeneous oxidative desulfurization process.After seven separate catalytic cycles,the desulfurization efficiency was still as high as 90.3%.From the gas chromatography-mass spectrometer analysis,DBT was entirely oxidized to its corresponding sulfone DBTO2 after reaction.A mechanism for the heterogeneous desulfurization reaction was proposed.展开更多
基金Project supported by the National Natural Science Foundation of China(50478026)
文摘Ce-doped nanosized ZnO desulfurizer was prepared by homogeneous precipitation,and its desulfurization efficiency at ambient temperature was investigated through dynamic experiments.The results showed that the desulfurization activity of nanosized Ce-ZnO had improved greatly,compared to nanosized ZnO desulfurizer.Nanosized Ce-ZnO desulfurizer was characterized by XRD,TPD-MS,XPS,and TEM.The research results indicated that doping Ce decreased the particle size of the nanosized ZnO desulfurizer and ZnS was the principal desulfurization product.There were adsorption complexes of HS and S on the surface of desulfurizer as well.Only a small amount of vapor appeared in the tail gas on the condition of meeting the precision of desulfurization.
基金Sponsored by National Key Technology Research and Development Program in 11th Five-Year Plan of China(2007BAF08B01-03)
文摘CaO-Al2O3-SiO2-CaF2-MgO was selected as the slag system for desulfurization in LF process.The reaction between steel and slag during desulfurization has been simulated by using Factsage software to study the influence of component on the sulfur distribution ratio.In order to research the influence of CaO content,aluminum powder content and its granularity on desulfurization,laboratory experiments have been carried out in a 200 kg inductive furnace.Results showed that the optimal composition of deep desulfurizer is wCaO=64% and aluminium powder 10% with a granularity of 30 μm.Industrial trials showed that the main composition range of final slag in LF process is wCaO=53.0%-57.0%,wAl2O3=23.4%-25.1%,wSiO2=8.1%-10.0%,and wCaF2=3.2%-4.7%.The sulfur mass percent in steel is lower than 0.0008% with a desulfurization rate above 89%.According to the result of industrial production,this desulfurizer could meet the production requirement for ultra-low sulfur steel,of which sulfur mass percent is under 0.0015%
基金supported by the Southwest University of Science and Technology(No.22zx7168)the Sichuan Science and Technology Program(No.2020YFG0186)。
文摘Low desulfurization efficiency impedes the wide application of dry desulfurization technology,which is a low-cost and simple process,and one significant solution is the development and manufacture of high-performance desulfurizers.In this study,firstly,a steam jet mill was used to digest quicklime;then,we utilized numerical simulation to study the flow field distribution and analyze the driving factors of quicklime digestion;and lastly,the desulfurization performance of the desulfurizer was evaluated under different relative humidities.The results show that the desulfurizer prepared via the steam jet mill had better apparent activity than traditional desulfurizers.Also,the entire jet flow field of the steam jet mill is in a supersonic and highly turbulent flow state,with high crushing intensity and good particle acceleration performance.Sufficient contact with the nascent surface maximizes the formation of slaked lime.The experiments demonstrated that the operating time with 100%desulfurization efficiency and the“break-through”time for the desulfurizer prepared via the steam jet mill is longer than that of traditional desulfurizers,and has significant advantages,especially at low flue gas relative humidity.Compared with traditional desulfurizers,the desulfurizer prepared via steam jet mill expands the range of acceptable flue gas temperature,and the failure temperature is 1.625 times that of traditional desulfurizers.This work breaks through the technical bottleneck of low dry desulfurization efficiency,which is an important step in pushing forward the application of dry desulfurization.
基金China National Science and Technology Major Project(2016ZX05017)Sinopec Group Corporation 2020 Science and Technology Project“Organic Sulfur Catalytic Hydrolysis Technology Improves Quality Research”(No.120049-1).
文摘In this experiment,an EG/ChCl deep eutectic solvent(DES)was synthesized using choline chloride(ChCl)and ethylene glycol(EG)as the raw materials.The synthesized DES was characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis.The results demonstrate the successful synthesis of DES.A certain amount of FeCl_(3) and CuSO_(4) was added to the DES to promote the absorption of H_(2)S;thus,a Fe(Ⅲ)-Cu(Ⅱ)coupled DES desulfurization system was obtained.The effects of DES raw materials’ratio,FeCl_(3) concentration,water content,CuSO_(4) concentration,and reaction temperature on the desulfurization efficiency and the regeneration conditions were studied.The results show that ChCl/EG DES with a molar ratio of 1:2 has a better desulfurization effect,and the addition of an appropriate amount of water can effectively promote the dissolution of CuSO_(4) and the absorption of H_(2)S.An appropriate increase in reaction temperature and CuSO_(4) concentration would also promote the absorption of H_(2)S.When the concentration of CuSO_(4) in DES desulfurizer was 0.15 mol/L,the gas speed was 20 mL/min,and the sulfur capacity could reach 10.23 g/L.The desulfurizer could be regenerated by passing O_(2),and the desulfurization efficiency did not change much after repeated use of desulfurization-regeneration many times.The desulfurization product was characterized by XRD as rhombohedral sulfur.
基金supported by the National Natural Science Foundation of China(No.50974035)National Natural Science Foundation of China(No.51074047)+2 种基金the doctoral fund of EDU gov(20090407)China Postdoctoral Science Foundation,(20090451277)Key scientific and technological program in Liaoning Province(200921007)
文摘This paper has investigated a new desulfurizer for iron and steel industry to make up the lackness of magnesium-based desulfurizer. In order to explore the desulfurization process of hot metal by the new desulfurizer, both the thermodynamics and experiments have been studied.. The results of thermodynamics indicated that, under the standard condition,the lowest reaction temperatures of MgO + C and MgO +Si were 1846℃ and 2132℃ and the pressure of Mg vapor at the hot metal temperature were 0.2-0.5kPa and 0.005-0.01kPa, respectively. In the case of reaction between MgO and Al, the calculated starting reaction temperature under standard condition was 1475 ℃, and the pressure of Mg vapor was distributed from 27 kPa to 45kPa at the hot metal temperature, showing that it was easy to happen the reaction of MgO+Al. The experimental results displayed that the desulfurization efficiency was only 42.31% by the desulfurizer of MgO and C, while the effect of MgO+ Al and MgO+ Al-Si was good, since the desulfurization efficiencies were above 85%, and the lowest sulfur content was below 40×10-6.
文摘Sulfur dioxide is one of the major pollutants resulting from fuel combustion. In this study, CaO and attapulgite were utilized as raw material for synthesizing CaO/attapulgite (CaO/ATP) desulfurizer. The physicochemical characteristics of CaO/ATP desulfurizer were evaluated by various techniques such as XRD, SEM, FT-IR. The performance of samples was studied in dynamic conditions. Major factors affecting on desulfurization such as weight ratio of CaO to total, types of modifiers, roasting time and temperature were investigated. The desulfurization agent synthesized under optimal synthesis conditions with CaO content of 30 wt% and NaOH modifier, and the desulfurization roasting time of 2 hours and roasting temperature of 600°C, exhibit sulfur tolerance of 10.15 wt%. This desulfurizer with excellent absorbency and catalysis of desulfurization, economical and?environment-friendly, could be especially useful in industrial applications.
基金the National Natural Science Foundation of China(Grant No.50478026)the Science Foundation for Young Scientists of Harbin University of Science and Technology(Grant No.2008XQJZ039)
文摘The compound nano-ZnO modified with Ce was prepared by homogeneous precipitation.IR,XRD and dynamic experiments show that the crystal size of nano-ZnO desulfurizer is decreased after being modified with Ce and its desulfurization activities are improved greatly.When calcined at 270 ℃,Ce distributes evenly on the ZnO particle surface as amorphous state oxides,and the amorphous ZnO·H2O also exists;when the calcining temperature is 570 ℃,the crystal CeO2 separates out and the amorphous structure of zinc oxide disappears,at the same time,the crystal is perfect and its size increases,but the desulfurization activities decrease.The desulfurization product of nano-ZnO modified with Ce was analyzed with XPS.The results show that the adsorption compound of HS,S and ZnS exists on the surface of the desulfurizer.
基金supported by the Natural Science Foundation of Guangdong Province(2024A1515010908,2025A1515011103)Opening Project of Hubei Key Laboratory of Plasma Chemistry and Advanced Materials(2024P11)+2 种基金Postdoctoral Fellowship Program of CPSF(GZC20233104)National Natural Science Foundation of China(22202087)Opening Project of Hubei Key Laboratory of Biomass Fibers and Eco-Dyeing&Finishing(STRZ202418)。
文摘Catalytic oxidation desulfurization(CODS)technology has shown great promise for diesel desulfurization by virtue of its low cost,mild reaction conditions,and superior desulfurization performance.Herein,a series of FeMoO_(x)/LaTiO_(y)-z samples with diverse Fe/Mo ratios were prepared via a facile citric acid-assisted method.The impact of Fe incorporation on the dispersion and surface elemental states of Mo species,as well as oxygen species content of the synthesized FeMoO_(x)/LaTiO_(y)-z catalysts were systematically characterized using TEM,BET,UV-vis DRS,XPS,XANES,and reaction kinetics,and their CODS performances were examined for 4,6-DMDBT removal.Experimental results demonstrated that Fe/Mo ratio significantly affected the Ti−O bond strength,surface dispersion and electronic structure of Mo O_(2)species on FeMoO_(x)/LaTiO_(y)-z catalysts.FeMoO_(x)/LaTiO_(y)-2 catalyst showed outstanding cycling durability and the best CODS performance with almost 100%removal of 4,6-DMDBT from model oil within 75 min due to its proper MoO3 dispersion,optimal redox property,and the most oxygen vacancy concentration.Nevertheless,further enhancing Fe content led to the increased dispersion of Mo species,while the decrease active Mo species as well as the increase of steric effect for 4,6-DMDBT accessing to the catalytic reactive sites considerably increase the apparent activation energy of FeMoO_(x)/LaTiO_(y)-z(z>2)catalysts during the CODS process,thereby seriously suppressing their CODS performances.Moreover,Radical trapping experiments reveal that the·,generated by the activation of O_(2)at the active sites,catalytic oxidized 4,6-DMDBT to the product of 4,6-DMDBTO_(2),thereby enabling both deep desulfurization and recovery of high-value 4,6-DMDBTO_(2).These findings offer an alternative strategy to achieve ultra deep desulfurization as well as separate and recover high economic value sulfone substances from diesel.
基金Project(52174239)supported by the National Natural Science Foundation of ChinaProject(2021YFC2902400)supported by the National Key R&D Program of China。
文摘The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The results showed that,the copper grade of the concentrate obtained from seawater flotation decreased to 24.30%,compared to 24.60%in DI water.Concurrently,the recovery of chalcopyrite decreased from 51.39%to 38.67%,while the selectivity index(SI)also had a reduction from 2.006 to 1.798.The incorporation of ethylene diamine tetraacetic acid(EDTA),sodium silicate(SS),and sodium hexametaphosphate(SHMP)yielded an enhancement in the SI value,elevating it from 1.798 to 1.897,2.250 and 2.153,separately.It is particularly noteworthy that an excess of EDTA resulted in a SI value of merely 1.831.The mechanism of action was elucidated through analysis of surface charge measurements,X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),extended Derjaguin-Landau Verwey-Overbeek(E-DLVO)theory,and density functional theory(DFT)calculations.
基金supported by the National Natural Science Foundation of China(52025103)the Xplorer Prize(XPLORER-2022-1034).
文摘In petroleum,mercaptan impurities generate malodorous fumes that pose risks to both human health and the environment,and leading to substandard oil quality.Lye desulfurization is a widely employed technique for eliminating mercaptans from oil.In traditional scrubber towers,lye and oil are poorly mixed,the desulfurization efficiency is low,and the lye consumption is high.To enhance washing efficiency,a droplet micromixer and corresponding fiber coalescence separator were developed.By optimizing the structure and operating parameters,more effective mixing and separation were achieved,and both caustic washing and desulfurization were enhanced.The proposed mixer/separator outperforms the industry standard by reducing the caustic loading by 30%and offers superior economic and engineering performances.The results of this study offer a direction for designing and optimizing a mercaptan removal unit to enhance the scrubbing effectiveness and decrease expenses to achieve more efficient and green production process.
基金support provided by South Africa National Research Foundation(UID 95983,113648,137947)Foundation for Innovative Research Groups of the Natural Science Foundation of Hebei Province(no.B2021208005).
文摘The development of highly active functionalized ionic liquids(ILs)as both extractants and catalysts for use in achieving deep desulfurization continues to pose challenges.In this study,a highly efficient oxidative desulfurization system was constructed,composed of dual-acidic ionic liquids(DILs)and H_(2)O_(2)-AcOH.The investigation results of four DILs prepared from different metal chlorides([HSO_(3)C_(3)NEt_(3)]Cl-MnCl_(n),MnCl_(n)=AlCl_(3),ZnCl_(2),CuCl_(2),FeCl_(3))in oxidative desulfurization showed that[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3)had an outstanding catalytic effect and significantly promoted the oxidation of sulfides.With a 0.2 g[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3),the removal rate of dibenzothiophene(DBT)reached 100%in 10 mL model oil under mild conditions at 55℃for 20 min.The key is its ability to induce the dismutation of su-peroxide anions(·O_(2)^(-)),which facilitates the generation of singlet oxygen(1 O_(2)).The efficient oxidation of DBT is accomplished through a predominantly^(1)O_(2)-mediated_(n)on-radical mechanism.[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3)serves as a favorable medium for contact to be made between^(1)O_(2)and sulfides,which indicates an efficient catalytic-adsorption synergy.
基金the support of the National Natural Science Foundation of China(Nos.22205207 and 22378369).
文摘With the acceleration of industrialization,the pollution problem of sulfur dioxide(SO_(2))emitted from coal-fired power plants has become increasingly severe.Although wet flue gas desulfurization(FGD)technology can remove about 95%of SO_(2),its high energy consumption and the corrosion risk of downstream equipment caused by residual SO_(2)(500–3000 ppm)still need to be addressed[1].Previous porous materials(such as MOFs)achieve selective adsorption of SO_(2) through open metal sites,M–OH sites or functional organic groups,but the problem of CO_(2) co-adsorption limits their practical application[2].In recent years,hydrogen-bonded organic frameworks(HOFs)have emerged as a research hotspot due to their reversible hydrogen-bonding networks and flexible structures[3],but their stability under extreme conditions and efficient separation performance still need to be improved[4].
基金supported by the National Natural Science Foundation of China(22162008)the Science and Technology Supporting Project of Guizhou Province([2022]208)+1 种基金the Guizhou Province Local Government Overseas Study Programthe open project of Guizhou Provincial Double Carbon and Renewable Energy Technology Innovation Research Institute.
文摘The development of an efficient dual-function catalytic-sorption system,which seamlessly integrates reaction and separation into a single step for extractant-free systems,represents a transformative advancement in oxidative desulfurization(ODS)process.In this work,we introduce a novel dualfunction amphiphilic biochar(Mo/CBC)catalyst,functionalized with MoO_(3-x)featuring abundant oxygen vacancies,for highly effective extractant-free ODS.The polarity of the biochar was precisely tailored by varying the amount of KOH,leading to the creation of amphiphilic carriers.Subsequent ball milling facilitated the successful loading of MoO_(3-x)onto the biochar surface via an impregnation-calcination route leveraging carbon reduction,resulting in the synthesis of amphiphilic Mo/CBC catalysts.The amphiphilic nature of these catalysts ensures their stable dispersion within the oil phase,while also facilitating their interaction with the oxidant H2O2 and the adsorption of sulfur-containing oxidation products.Characterization techniques,including EPR,XPS,and in situ XRD,verified the existence of abundant oxygen vacancies obtained by carbon reduction on the amphiphilic Mo/CBC catalysts,which significantly boosted their activity in an extractant-free ODs system.Remarkably,the amphiphilic Mo/CBC catalyst displayed exceptional catalytic performance,achieving a desulfurization efficiency of 99.6%in just 10 min without extraction solvent.DFT theoretical calculations further revealed that H_(2)O_(2)readily dissociates into two OH radicals on the O_(vac)-MoO_(3),overcoming a low energy barrier.This process was identified as a key contributor to the catalyst's outstanding ODS performance.Furthermore,other biochar sources,such as rice straw,bamboo,rapeseed oil cake,and walnut oil cake,were investigated to produce Mo-based amphiphilic biochar catalysts,which all showed excellent desulfurization performance.This work establishes a versatile and highly efficient dual-function catalytic-sorption system by designing amphiphilic biochar catalysts enriched with oxygen vacancies,paving the way for the development of universally applicable ODS catalysts for industrial applications.
基金supported by the National Key Research and Development Program of China(2022YFC2904400)Guangxi Science and Technology Major Project(Gui Ke AA23023033)。
文摘As a pyrometallurgical process,circulating fluidized bed(CFB) roasting has good potential for application in desulfurization of high-sulfur bauxite.The gas-solid distribution and reaction during CFB roasting of high-sulfur bauxite were simulated using the computational particle fluid dynamics(CPFD) method.The effect of primary air flow velocity on particle velocity,particle volume distribution,furnace temperature distribution and pressure distribution were investigated.Under the condition of the same total flow of natural gas,the impact of the number of inlets on the desulfurization efficiency,atmosphere mass fraction distribution and temperature distribution in the furnace was further investigated.
文摘For the treatment of the mixed flue gas desulfurization wastewater with high salinity by the biological fluidized bed process,the optimum temperature was 25-35℃,and the optimum hydraulic retention time was 10 h.When the influent quality was stable,the average concentration of COD,NH_(4)^(+)-N and TN in the inlet water was 210,11 and 16.3 mg/L,respectively,and their average concentration in the effluent was 54,0.32 and 4.09 mg/L,respectively.The treatment effect was good.When the incoming water quality of flue gas desulfurization wastewater fluctuated greatly,the effluent quality was still relatively stable after being treated by the biological fluidized bed,indicating that the biological fluidized bed process had a good ability to resist the impact of water quality in the treatment of high-salinity flue gas desulfurization wastewater.At the same time,the biological fluidized bed process provides a reference for high-salinity wastewater that is difficult to be biologically treated.
基金supported by the National Key Research and Development Program of China(2022YFA1504402)National Energy R&D Center of Petroleum Refining Technology(RIPP,SINOPEC)+2 种基金the National Natural Science Foundation of China(22472016 and U23B20169)Key R&D Program of Ningbo(No.2023Z144)the Fundamental Research Funds for the Central Universities(DUT22LAB601).
文摘Desulfurization technology is rather difficult and urgently needed for carbon dioxide(CO_(2))utilization in industry.A new Cu(I)-based adsorbent was synthesized and examined for the capacity of removing carbonyl sulfide(COS)from a CO_(2)stream in an effort to solve the competitive adsorption between CO_(2)and COS and to seek opportunity to advance adsorption capacity.A wide range of character-ization techniques were used to investigate the physicochemical properties of the synthesized Cu(I)adsorbent featuringπ-complexation and their correlations with the adsorption performance.Meanwhile,the first principal calculation software CP2K was used to develop an understanding of the adsorption mechanism,which can offer useful guidance for the adsorbent regeneration.The synthesized Cu(I)adsorbent,prepared by using copper citrate and citric acid on the ZSM-5(SiO_(2)/Al_(2)O_(3)=25)carrier,outperformed other adsorbents with varying formulations and carriers in adsorption capacities.Through optimization of the preparation and adsorption conditions for various adsorbents,the breakthrough adsorption capacity(Qb)for COS was further enhanced from 2.19 mg/g to 15.36 mg/g.The formed stableπ-complex bonds between COS and Cu(I),as confirmed by density func-tional theory calculations,were verified by the significant improvement in the adsorption capacity after regeneration at 600°C.The above advantages render the novel synthesized Cu(I)adsorbent a promising candidate featuring cost-effectiveness,high efficacy and good regenerability for desulfurization from a CO_(2)stream.
基金supports from National Natural Science Foundation of China(Nos.22172066,22378176)supported by State Key Laboratory of Heavy Oil Processing.Supported by Jiangsu Collaborative Innovation Center of TechnologyMaterial of Water Treatment,Suzhou University of Science and Technology.
文摘Development of clean desulfurization process that combines both efficient and environmentally friendly remains a significant challenge for diesel production.The photocatalytic oxidation desulfurization technology is regarded as a promising process depending on the superior electron transfer and visible light utilization of photocatalyst.Herein,the nonstoichiometry MoO_(3-x)with outstanding photoresponse ability is prepared and modified by imidazole-based ionic liquid[C_(12)mim]Cl to upgrade electronic structure.The interface H-bonding between MoO_(3-x)and[C_(12)mim]Cl regard as electronic transfer channel and the recombination of e^(-)-h^(+)pairs is effectively inhibited with the modification of[C_(12)mim]Cl.Deep desulfurization rate of 96.6%can be reached within 60 min and the MoO_(3-x)/[C_(12)mim]Cl(MoC_(12))photocatalyst demonstrated outstanding cyclic stability within 7 cycles in an extraction coupled photocatalytic oxidation desulfurization(ECPODS)system.The study provides a new perspective on enhancing photocatalytic desulfurization through defect engineering and surface modification.
基金The National Natural Science Foundation of China(No.51978504).
文摘Practical applications of desulfurization gypsum are limited owing to its brittleness and low strength.To overcome these challenges,researchers have developed engineered desulfurization gypsum composites(EDGCs)by incorporating ultrahigh molecular weight polyethylene(UHMWPE)fiber and sulfoaluminate cement(SAC).The mix ratio was optimized using response surface methodology(RSM).Experimental testing of EDGC under compressive and tensile loads led to the creation of a regression model that investigates the influence of variables and their interactions on the material’s compressive and tensile strengths.Additionally,microscopic morphology and hydration product composition were analyzed to explore the influence mechanism.The results indicated that EDGC’s compressive strength increased by up to 38.4%owing to a decreased water-binder ratio and higher SAC content.Similarly,tensile strength increased by up to 38.6%owing to increased SAC and fiber content.Moreover,EDGC demonstrated excellent strain-hardening behavior and multiple cracking characteristics,achieving a maximum tensile strain of nearly 3%.The research findings provide valuable insights for optimizing the performance of desulfurization gypsum.
基金supported by the National Nature Science Foundation of China(21276117,21376111,21406092)~~
文摘A series of functional,tungsten-containing mesoporous silica materials（W-SiO2） have been fabricated directly from an ionic liquid that contained imidazole and polyoxometalate,which acted as mesoporous template and metal source respectively.These materials were then characterized through X-ray diffraction（XRD）,transmission electron microscopy（TEM）,Raman spectroscopy,Fourier transform infrared spectra（FTIR）,diffuse reflectance spectra（DRS）,and N2 adsorption-desorption,which were found to contain tungsten species that were effectively dispersed throughout the structure.The as-prepared materials W-SiO2 were also found to possess a mesoporous structure.The pore diameters of the respective sample W-SiO2-20 determined from the TEM images ranged from 2 to 4 nm,which was close to the average pore size determined from the nitrogen desorption isotherm（2.9 nm）.The materials were evaluated as catalysts for the heterogeneous oxidative desulfurization of dibenzothiophene（DBT）,which is able to achieve deep desulfurization within 40 min under the optimal conditions（Catalyst（W-SiO2-20）= 0.01 g,temperature = 60℃,oxidant（H2O2）= 20 μL）.For the removal of different organic sulfur compounds within oil,the ability of the catalyst（W-SiO2-20） under the same conditions to remove sulfur compounds decreased in the order：4,6-dimethyldibenzothiophene Dibenzothiophene Benzothiophene 1-dodecanethiol.Additionally,they did not require organic solvents as an extractant in the heterogeneous oxidative desulfurization process.After seven separate catalytic cycles,the desulfurization efficiency was still as high as 90.3%.From the gas chromatography-mass spectrometer analysis,DBT was entirely oxidized to its corresponding sulfone DBTO2 after reaction.A mechanism for the heterogeneous desulfurization reaction was proposed.
