In the present work, for the first time on the basis ofpoly （vinyl alcohol） （PVA）, 2- （4-dimethylaminostyryl）-l-ethylquinolinium iodide （quinaldine red （QR）） and trisodium （4E）-5-oxo- 1-（4-sulfonatophenyl...In the present work, for the first time on the basis ofpoly （vinyl alcohol） （PVA）, 2- （4-dimethylaminostyryl）-l-ethylquinolinium iodide （quinaldine red （QR）） and trisodium （4E）-5-oxo- 1-（4-sulfonatophenyl）-4-[（4-sulfonatophenyl）hydrazono]-3 pyrazolecarboxylate （tartrazine （T））, thermostable polarizing film in a wide range of spectra （λmax=394-511 nm） with polarization efficiency （PE） = 98% in absorption maximum and stretching degree （Rs） = 3.5 was developed. The basic spectral-polarization parameters （polarization efficiency and transmittance） of oriented colored PVA-films were measured and discussed. During the work it was found that oriented PVA-films are the phenomenon of anisotropy of thermal conductivity （λ｜/λ⊥）. It is a very important parameter for the development of thermostable PVA-polarizing films. For the first time quantum-chemical calculations using density functional theory （DFT） approach for structural analysis and electronic spectrum of the QR were carried out via the B3LYP/dgdzvp and TDB3LYP/dgdzvp methods. Interpretation of absorption strips in visible region of spectrum was also reported. The excitation energies, electronic transitions and oscillator strengths for the studied structures have also been calculated （B3LYP/dgdzvp）. The NBO analysis and Mulliken atomic charges of the QR were carried out.展开更多
A broadband microstrip patch antenna, loaded E-U-shaped open slot on backward of radiating layer is proposed and experimentally investigated. The antenna employs a foam-filled dielectric substrate, whose dielectric co...A broadband microstrip patch antenna, loaded E-U-shaped open slot on backward of radiating layer is proposed and experimentally investigated. The antenna employs a foam-filled dielectric substrate, whose dielectric constant is within the lower end of the range. The proposed antenna has been designed for electromagnetic analysis including the impedance bandwidth, reflection coefficient, radiation pattern, and antenna gain. The open slot is loaded on the back radiated layer, which is perpendicular to the radiating edge of the oblong microstrip patch component, where the symmetric line feed is selected. This new technique used to increase the bandwidth and the gain of antenna through increasing current path by slot location, width and length on backward of radiating Layer. The main structure in this research was a single microstrip patch antenna planar with three layers operating at two resonant frequencies 4.440 GHz and 5.833 GHz. All the simulated results are confirmed by two packages of electromagnetism simulation. An impedance bandwidth (S11 ≤ ?10 dB) up to about 41.03% and 30.61% is achieved by individually optimizing its parameters. The antenna exhibits nearly stable radiation pattern with a maximum gains of 8.789 dBi and 9.966 dBi, which is suitable for Wi-Fi Band, satellite communications, and wireless presented. Whereas the results before this design that we have a proof of publication are 36.17% and 28.43%.展开更多
Breakthrough point source model, extended earthquake source model is used to calculate more seismic source parameters in this paper. We express seismic source using higher degree moment tensors, to reduce a Iarge numb...Breakthrough point source model, extended earthquake source model is used to calculate more seismic source parameters in this paper. We express seismic source using higher degree moment tensors, to reduce a Iarge number terms originally presenting in higher degree moment tensor representation, Haskell rupture model is used. We in verted the source parameters of Mani earthquake in Tibet using broad-band body wave of 32 stations of Global Seismograph Network (GSN), the results show that it is a strike-slip fault, rupture direction is 75°, rupture duration is 19 s, the fault plan is φ=77°， δ5=88°, A=0°, the auxiliare plane is φ=347°, δ=90°, k=178°, and the fault dimension is 47 km×28 km. These results will give new quantitative data for earth dynamics and have practical meaning for seismic source tomography research.展开更多
Guided-mode resonance in a diffraction band of multilayer dielectric gratings may lead to a catastrophic result in laser system, especially in the ultrashort pulse laser system, so the inhibition of guided-mode resona...Guided-mode resonance in a diffraction band of multilayer dielectric gratings may lead to a catastrophic result in laser system, especially in the ultrashort pulse laser system, so the inhibition of guided-mode resonance is very important. In this paper the characteristics of guided-mode resonance in multilayer dielectric grating are studied with the aim of better understanding the physical process of guided-mode resonance and designing a broadband multilayer dielectric grating with no guided-mode resonance. By employing waveguide theory, all guided-wave modes appearing in multilayer dielectric grating are found, and the incident conditions, separately, corresponding to each guided-wave mode are also obtained. The electric field enhancement in multilayer dielectric grating is shown obviously. Furthermore, from the detailed analyses on the guided-mode resonance conditions, it is found that the reduction of the grating period would effectively avoid the appearing of guided-mode resonance. And the expressions for calculating maximum periods, which ensure that no guided-mode resonance occurs in the requiring broad angle or wavelength range, are first reported. The above results calculated by waveguide theory and Fourier mode method are compared with each other, and they are coincident completely. Moreover, the method that relies on waveguide theory is more helpful for understanding the guided-mode resonance excited process and analyzing how each parameter affects the characteristic of guided-mode resonance. Therefore, the effects of multilayer dielectric grating parameters, such as period, fill factor, thickness of grating layer, et al., on the guided-mode resonance characteristic are discussed in detail based on waveguide theory, and some meaningful results are obtained.展开更多
Broad band and very broad band (BB and VBB) records of Chinese Digital Seismograph Network (CDSN) from 65 earthquakes are used to calculate the horizontal relative displacement, relative velocity and absolute accelera...Broad band and very broad band (BB and VBB) records of Chinese Digital Seismograph Network (CDSN) from 65 earthquakes are used to calculate the horizontal relative displacement, relative velocity and absolute acceleration response spectra with critical damping ratio ζ =0.005, 0.01, 0.02, 0.05 and 0.10, respectively. The results show that it is insufficient to obtain the credible characteristics of long-period ground motion response spectra only with the common ground acceleration records in engineering, while the broad band records of CDSN, as an important supplementary to ground acceleration records, can be used to study the characteristics of long-period ground motion response spectra.展开更多
A tunable dual-broad-band branch-line coupler (BLC) utilizing composite right/left-handed (CRLH) transmission lines is presented. Two λ/4 segments consisting of CRLH transmission lines are added to each port to broad...A tunable dual-broad-band branch-line coupler (BLC) utilizing composite right/left-handed (CRLH) transmission lines is presented. Two λ/4 segments consisting of CRLH transmission lines are added to each port to broaden the dual bands of the branch-line coupler. Numerical simulation and optimal design of the novel coupler are presented. The dual bands of the novel coupler are tunable and broad. The 1-dB bandwidth of each pass band is more than 16% of the central frequency.展开更多
DVA (dynamic vibration absorber) is good for restrain of the resonance vibration in low frequency, especially under the condition that there are only one mode or two modes in a frequency band. It seems rather difficul...DVA (dynamic vibration absorber) is good for restrain of the resonance vibration in low frequency, especially under the condition that there are only one mode or two modes in a frequency band. It seems rather difficult to control the resonance vibration of elastic structures in high frequency, since usually there are so many modes in high frequency band. The broad band DVA is brought forward to reduce the resonance vibration of elastic structures. The broad band DVA is designed on the basis of the characteristic of power flow in structure in this paper. The broad band DVA is effective on absorbing the resonance vibration power flow of the most important modes. The ability of absorbing vibration for the broad band DVA is analyzed in detail. The results obtained in this paper provide a basis for the optimization design of the broad band DVA and the optimization positions on structures.展开更多
A broadband T/R frond-end of active holographic imaging system is presented. Compact autodyne mode circuit structure front-end is adopted to achieve higher signal to noise ratio and higher reliability, which is benefi...A broadband T/R frond-end of active holographic imaging system is presented. Compact autodyne mode circuit structure front-end is adopted to achieve higher signal to noise ratio and higher reliability, which is beneficial to the after-end imagining. The factors that influence the dynamic range and the transverse resolution ratio of holographic imaging system have been analyzed. Wide-band oscillator, wide-band low noise amplifier and the tapered slot antennas are implemented to meet the requirements of the holographic imagining system. According to the measured results, the output power is uniform in the broadband working frequency. The sub-harmonic suppression is better than 25 dBc from the frequency of 28 GHz to 33 GHz. The isolation between antennas channel is greater than 20 dB. The experimental result shows that the performance of the front-end is good enough to meet the needs of active millimeter-wave holographic imaging system.展开更多
A fatigue life estimation method for offshore structures under random stress response is studied in this paper. The method of broad band cumulative frequency number is used to determine the effect of band width of str...A fatigue life estimation method for offshore structures under random stress response is studied in this paper. The method of broad band cumulative frequency number is used to determine the effect of band width of stress frequency spectra on fatigue. A formula of correction factor for fatigue under broad band stress spectra is suggested and compared with that given by P. H. Wirsching.展开更多
In order to design a multilayer dielectric grating with wide-bandwidth diffraction spectrum, the restriction factors of both the reflection bandwidth of multilayer dielectric high-reflectivity mirror and the guided-mo...In order to design a multilayer dielectric grating with wide-bandwidth diffraction spectrum, the restriction factors of both the reflection bandwidth of multilayer dielectric high-reflectivity mirror and the guided-mode resonance phe- nomenon are studied in detail. The reflection characteristics of high-reflectivity mirror in zeroth and -lst transmitted diffraction orders are quantitatively evaluated. It is found that the reflection bandwidth of high-reflectivity mirror in -lst transmitted diffraction order, which determines the final diffraction bandwidth of multilayer dielectric grating, is evidently compressed. Furthermore, it is demonstrated that the reducing of grating period is an effective approach to the elimination of guided mode resonance over a required broad band range both spectrally and angularly. In addition, the expressions for calculating the maximum period ensuring no guided mode resonance in the required bandwidth are derived. Finally, two high-efficiency pulse-compression gratings with broad-band are presented.展开更多
基金supported by the National Academy of Sciences of Belarus
文摘In the present work, for the first time on the basis ofpoly （vinyl alcohol） （PVA）, 2- （4-dimethylaminostyryl）-l-ethylquinolinium iodide （quinaldine red （QR）） and trisodium （4E）-5-oxo- 1-（4-sulfonatophenyl）-4-[（4-sulfonatophenyl）hydrazono]-3 pyrazolecarboxylate （tartrazine （T））, thermostable polarizing film in a wide range of spectra （λmax=394-511 nm） with polarization efficiency （PE） = 98% in absorption maximum and stretching degree （Rs） = 3.5 was developed. The basic spectral-polarization parameters （polarization efficiency and transmittance） of oriented colored PVA-films were measured and discussed. During the work it was found that oriented PVA-films are the phenomenon of anisotropy of thermal conductivity （λ｜/λ⊥）. It is a very important parameter for the development of thermostable PVA-polarizing films. For the first time quantum-chemical calculations using density functional theory （DFT） approach for structural analysis and electronic spectrum of the QR were carried out via the B3LYP/dgdzvp and TDB3LYP/dgdzvp methods. Interpretation of absorption strips in visible region of spectrum was also reported. The excitation energies, electronic transitions and oscillator strengths for the studied structures have also been calculated （B3LYP/dgdzvp）. The NBO analysis and Mulliken atomic charges of the QR were carried out.
文摘A broadband microstrip patch antenna, loaded E-U-shaped open slot on backward of radiating layer is proposed and experimentally investigated. The antenna employs a foam-filled dielectric substrate, whose dielectric constant is within the lower end of the range. The proposed antenna has been designed for electromagnetic analysis including the impedance bandwidth, reflection coefficient, radiation pattern, and antenna gain. The open slot is loaded on the back radiated layer, which is perpendicular to the radiating edge of the oblong microstrip patch component, where the symmetric line feed is selected. This new technique used to increase the bandwidth and the gain of antenna through increasing current path by slot location, width and length on backward of radiating Layer. The main structure in this research was a single microstrip patch antenna planar with three layers operating at two resonant frequencies 4.440 GHz and 5.833 GHz. All the simulated results are confirmed by two packages of electromagnetism simulation. An impedance bandwidth (S11 ≤ ?10 dB) up to about 41.03% and 30.61% is achieved by individually optimizing its parameters. The antenna exhibits nearly stable radiation pattern with a maximum gains of 8.789 dBi and 9.966 dBi, which is suitable for Wi-Fi Band, satellite communications, and wireless presented. Whereas the results before this design that we have a proof of publication are 36.17% and 28.43%.
文摘Breakthrough point source model, extended earthquake source model is used to calculate more seismic source parameters in this paper. We express seismic source using higher degree moment tensors, to reduce a Iarge number terms originally presenting in higher degree moment tensor representation, Haskell rupture model is used. We in verted the source parameters of Mani earthquake in Tibet using broad-band body wave of 32 stations of Global Seismograph Network (GSN), the results show that it is a strike-slip fault, rupture direction is 75°, rupture duration is 19 s, the fault plan is φ=77°， δ5=88°, A=0°, the auxiliare plane is φ=347°, δ=90°, k=178°, and the fault dimension is 47 km×28 km. These results will give new quantitative data for earth dynamics and have practical meaning for seismic source tomography research.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10704079)
文摘Guided-mode resonance in a diffraction band of multilayer dielectric gratings may lead to a catastrophic result in laser system, especially in the ultrashort pulse laser system, so the inhibition of guided-mode resonance is very important. In this paper the characteristics of guided-mode resonance in multilayer dielectric grating are studied with the aim of better understanding the physical process of guided-mode resonance and designing a broadband multilayer dielectric grating with no guided-mode resonance. By employing waveguide theory, all guided-wave modes appearing in multilayer dielectric grating are found, and the incident conditions, separately, corresponding to each guided-wave mode are also obtained. The electric field enhancement in multilayer dielectric grating is shown obviously. Furthermore, from the detailed analyses on the guided-mode resonance conditions, it is found that the reduction of the grating period would effectively avoid the appearing of guided-mode resonance. And the expressions for calculating maximum periods, which ensure that no guided-mode resonance occurs in the requiring broad angle or wavelength range, are first reported. The above results calculated by waveguide theory and Fourier mode method are compared with each other, and they are coincident completely. Moreover, the method that relies on waveguide theory is more helpful for understanding the guided-mode resonance excited process and analyzing how each parameter affects the characteristic of guided-mode resonance. Therefore, the effects of multilayer dielectric grating parameters, such as period, fill factor, thickness of grating layer, et al., on the guided-mode resonance characteristic are discussed in detail based on waveguide theory, and some meaningful results are obtained.
文摘Broad band and very broad band (BB and VBB) records of Chinese Digital Seismograph Network (CDSN) from 65 earthquakes are used to calculate the horizontal relative displacement, relative velocity and absolute acceleration response spectra with critical damping ratio ζ =0.005, 0.01, 0.02, 0.05 and 0.10, respectively. The results show that it is insufficient to obtain the credible characteristics of long-period ground motion response spectra only with the common ground acceleration records in engineering, while the broad band records of CDSN, as an important supplementary to ground acceleration records, can be used to study the characteristics of long-period ground motion response spectra.
基金Project (No. 2004CB719802) supported by the National Basic Re-search Program (973) of China
文摘A tunable dual-broad-band branch-line coupler (BLC) utilizing composite right/left-handed (CRLH) transmission lines is presented. Two λ/4 segments consisting of CRLH transmission lines are added to each port to broaden the dual bands of the branch-line coupler. Numerical simulation and optimal design of the novel coupler are presented. The dual bands of the novel coupler are tunable and broad. The 1-dB bandwidth of each pass band is more than 16% of the central frequency.
基金This work was supported by the National Natural Science Foundation of Chinaby Post-Doctoral ScienceFoundation ofChina and by Excellent DoctoralFoundation ofChina.
文摘DVA (dynamic vibration absorber) is good for restrain of the resonance vibration in low frequency, especially under the condition that there are only one mode or two modes in a frequency band. It seems rather difficult to control the resonance vibration of elastic structures in high frequency, since usually there are so many modes in high frequency band. The broad band DVA is brought forward to reduce the resonance vibration of elastic structures. The broad band DVA is designed on the basis of the characteristic of power flow in structure in this paper. The broad band DVA is effective on absorbing the resonance vibration power flow of the most important modes. The ability of absorbing vibration for the broad band DVA is analyzed in detail. The results obtained in this paper provide a basis for the optimization design of the broad band DVA and the optimization positions on structures.
文摘A broadband T/R frond-end of active holographic imaging system is presented. Compact autodyne mode circuit structure front-end is adopted to achieve higher signal to noise ratio and higher reliability, which is beneficial to the after-end imagining. The factors that influence the dynamic range and the transverse resolution ratio of holographic imaging system have been analyzed. Wide-band oscillator, wide-band low noise amplifier and the tapered slot antennas are implemented to meet the requirements of the holographic imagining system. According to the measured results, the output power is uniform in the broadband working frequency. The sub-harmonic suppression is better than 25 dBc from the frequency of 28 GHz to 33 GHz. The isolation between antennas channel is greater than 20 dB. The experimental result shows that the performance of the front-end is good enough to meet the needs of active millimeter-wave holographic imaging system.
文摘A fatigue life estimation method for offshore structures under random stress response is studied in this paper. The method of broad band cumulative frequency number is used to determine the effect of band width of stress frequency spectra on fatigue. A formula of correction factor for fatigue under broad band stress spectra is suggested and compared with that given by P. H. Wirsching.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10704079)the Natural Science Foundation of Shanghai Committee of Science and Technology, China (Grant No. 10ZR1433500)
文摘In order to design a multilayer dielectric grating with wide-bandwidth diffraction spectrum, the restriction factors of both the reflection bandwidth of multilayer dielectric high-reflectivity mirror and the guided-mode resonance phe- nomenon are studied in detail. The reflection characteristics of high-reflectivity mirror in zeroth and -lst transmitted diffraction orders are quantitatively evaluated. It is found that the reflection bandwidth of high-reflectivity mirror in -lst transmitted diffraction order, which determines the final diffraction bandwidth of multilayer dielectric grating, is evidently compressed. Furthermore, it is demonstrated that the reducing of grating period is an effective approach to the elimination of guided mode resonance over a required broad band range both spectrally and angularly. In addition, the expressions for calculating the maximum period ensuring no guided mode resonance in the required bandwidth are derived. Finally, two high-efficiency pulse-compression gratings with broad-band are presented.
