The breakwaters have experienced many changes during their construction history.These changes have been considered to improve their performance,depending on their environmental conditions and applications.Numerical mo...The breakwaters have experienced many changes during their construction history.These changes have been considered to improve their performance,depending on their environmental conditions and applications.Numerical modelling was conducted using FLOW-3 D software.In this study,the wave overtopping from composite berm breakwater as new conceptual structure and the pressure imposed on the composite berm breakwater are considered and investigated.The results show a decrease of 84.01,70.88 and 61.42 percent of the wave overtopping in the composite berm breakwater,in comparison to the rubble mound breakwater,horizontally caisson breakwater and caisson breakwater,respectively.Also,the pressure applied to the composite berm breakwater with the pressure applied to the horizontally caisson breakwater was compared and evaluated.Composite berm breakwater compared with horizontally caisson breakwater in P1,the amount of the obtained pressure decreased by 52.09%,in P2 the amount of the obtained pressure decreased by 63.07%,in P3 decreased by 76.09%and in Pu,this pressure reduced by53.92%.For the composite berm breakwater,the impact of three types of berms,homogenous berm(Type 1),a berm consisting of armor-filter(Type 2)and multi-layer berm(Type 3)with the aim of optimizing the hydraulic responses and wave interaction on the caisson of the breakwater was examined and evaluated.In total,Type 3 will be recommended with a significant reduction in the overtopping values and maximum pressure.展开更多
This study applies a double snap-through mechanism on a box-type oscillating buoy(OB)wave energy converter(WEC)-floating breakwater integrated system(OB WEC-FB)to simultaneously achieve efficient wave energy conversio...This study applies a double snap-through mechanism on a box-type oscillating buoy(OB)wave energy converter(WEC)-floating breakwater integrated system(OB WEC-FB)to simultaneously achieve efficient wave energy conversion and nearshore protection within a low-frequency bandwidth.This mechanism consists of four oblique springs and can operate in mono-stable,bi-stable,and tri-stable modes.A viscous-flow-based numerical model is established to investigate the hydrodynamic performance and dynamic behavior of the proposed multi-stable breakwater.The operational performance of the breakwater at different dynamic modes is first compared.The effects of the springs’original length and stiffness coefficient are then analyzed.The results show that the tri-stable breakwater has a wider resonance frequency tuning range than the bi-stable one,both of which outperform the mono-stable and linear ones in shifting the effective bandwidth to a lower frequency range.For a tri-stable breakwater,a large distance between outermost potential wells is conducive to tuning resonance frequency,whereas shallow potential wells limit this effect.The increase in spring stiffness distinctly causes a higher potential barrier and thus constrains the motion response of the breakwater.A well-designed double snap-through mechanism can excite large-amplitude inter-well motion,tune the resonance frequency of breakwater from 3.98 to 1.96 rad/s,and decrease the lower limit of the effective transmission bandwidth from 3.75 to 3.00 rad/s.It is crucial for improving the power absorption and wave attenuation capabilities of multi-stable OB WEC-FB.This study contributes to the limited research on the implementation of a double snap-through mechanism on multifunctional marine structures.It establishes the underlying connection between nonlinear dynamic behaviors and hydrodynamic coefficients.展开更多
Floating breakwaters(FBs)are commonly employed for the protection of coastal installations.In this work,a convextype floating breakwater(FB)is proposed,and its hydrodynamic characteristics are studied through systemat...Floating breakwaters(FBs)are commonly employed for the protection of coastal installations.In this work,a convextype floating breakwater(FB)is proposed,and its hydrodynamic characteristics are studied through systematic laboratory experiments.Two different deck widths and two different mooring systems are set in the experiment.The transmission coefficients,reflection coefficients,motion responses and mooring forces of convex-type FBs are obtained in experiments.The influences of the deck width and mooring system on the hydrodynamic characteristics of the proposed FB are analyzed and compared.The experimental results show that the reflection coefficient and mooring force of the convex-type FB with a cross-mooring system are significantly larger than those of the convextype FB with a parallel-mooring system.A convex-type FB with a larger deck width has a higher reflection coefficient.The convex-type FBs with cross-and parallel-mooring systems have similar surge and heave motions,but the cross-mooring results in small roll motion.In addition,reliable prediction formulas for the transmission coefficient of convex-type FBs with different mooring systems have been developed,which are important for engineering design.展开更多
This study investigates the performance of dual curved-leg pontoon floating breakwaters in finite water depth under the assumption of linear wave theory. The analysis is carried out for four different models of curved...This study investigates the performance of dual curved-leg pontoon floating breakwaters in finite water depth under the assumption of linear wave theory. The analysis is carried out for four different models of curvedleg geometries, which are combinations of convex and concave shapes. The models are classified as follows. Model-1: Seaside and leeside face concave, Model-2: Seaside and leeside face convex, Model-3: Seaside face convex and leeside face concave, and Model-4: Seaside face concave and leeside face convex. The Boundary Element Method is utilized in order to find a solution to the associated boundary value problem. The numerical results are validated against existing analytical and experimental data. Further, the study examines the wave reflection, wave transmission, and the hydrodynamic forces acting on the structure for different values of waves and structural parameters. Overall, the different dual curved-leg pontoon breakwaters are more effective, reducing wave transmission by over 15% and increasing wave reflection by more than 5% compared to traditional models. The study shows that the wave reflected by Model 1 significantly increased and attenuated the wave transmission relative to other models. The study found that the height of the curved-leg of Model 1 plays a critical role in blocking waves and redirecting the flow. More precisely, the present analysis concludes that the hydrodynamic performance of Model-1 presents an optimized breakwater design that outperforms the proposed models.展开更多
Two asymmetric types of floating breakwaters integrated with a wave energy converter(WEC-FBs),a floating square box with a triangle(trapezoidal type)or a wave baffle(L type)attached to its rear side,have been proposed...Two asymmetric types of floating breakwaters integrated with a wave energy converter(WEC-FBs),a floating square box with a triangle(trapezoidal type)or a wave baffle(L type)attached to its rear side,have been proposed.In this research,the hydrodynamic performance,including capture width ratio(CWR),wave transmission coefficient,heave motion,and force coefficient,were studied and compared between the two types.A numerical simulation model based on the Navier-Stokes equation was employed.The effects of power take-off(PTO)damping coefficient,wave periods,and draft/displacement on the hydrodynamic performance of the two structure shapes were simulated and investigated.The results reveal that the L type performs better in shorter wave periods,and the trapezoidal type exhibits a higher CWR in intermediate wave periods.This study offers knowledge of the design and protection of the two WEC-FB types.展开更多
The wave attenuation performance of a floating breakwater is important in engineering applications.On the basis of potential flow theory,the analytical and simplified solutions of the transmission coefficient of a flo...The wave attenuation performance of a floating breakwater is important in engineering applications.On the basis of potential flow theory,the analytical and simplified solutions of the transmission coefficient of a floating breakwater are deduced via velocity potential decompositions and eigenfunction expansions.The effects of the floating breakwater configuration,working sea state and motion response on the wave attenuation performance are described,facilitating a deeper investigation into the wave attenuation mechanism of the breakwater.The results indicate that the width and draft of the breakwater,incident wavelength,and motion response significantly affect the transmission coefficient of the breakwater.The wave passability rate,α1(α1=0.5−2B/L),is defined to qualitatively explain why long-period waves are difficult to control and attenuate.The radiation effect caused by the motion of the floating breakwater on the transmission coefficient is relatively complex,and the wave attenuation efficiency of the breakwater can be improved by optimizing the motion response.The incident wavelength and breakwater width are selected as the control parameters,and transmission coefficient charts of the floating breakwater for two-dimensional conditions are drawn,providing technical guidance for the configuration selection and design of the floating breakwater.展开更多
Rubble mound breakwaters, a prevalent type of sloping breakwater structure, are extensively employed in port and coastal infrastructure projects. Under soft soil foundation conditions, the process of squeezing silt by...Rubble mound breakwaters, a prevalent type of sloping breakwater structure, are extensively employed in port and coastal infrastructure projects. Under soft soil foundation conditions, the process of squeezing silt by riprap is implemented to enhance bearing capacity through soft soil replacement and compaction. However, predicting the depth law of squeezing silt by riprap and understanding its mechanism remain significant engineering design challenges.This study employs particle flow code(PFC) based on the discrete element method to simulate the squeezing silt process by riprap, examining variations in depth law under different geological conditions and its mechanical characteristics.Through calibration of the PFC model's meso-parameters via macro-experiments, the study analyzes the effects of riprap size, drop height, and soft soil properties on the depth law of squeezing silt. Findings demonstrate that riprap drop height and soft soil thickness substantially influence the depth, while appropriate calibration of meso-parameters enhances simulation accuracy. This research contributes theoretical and practical guidance for optimizing rubble mound breakwater design, understanding squeezing silt mechanisms, construction practices, and riprap quantity estimation.展开更多
The sea bottom in front of a breakwater is scoured under the action of broken waves,and this will affect the stability of the breakwater.In this paper,the scours of sandy seabed in front of a breakwater under the acti...The sea bottom in front of a breakwater is scoured under the action of broken waves,and this will affect the stability of the breakwater.In this paper,the scours of sandy seabed in front of a breakwater under the action of broken waves are investigated experimentally.The depth and range of the scouring trough at the foot of a breakwater are studied,and the influence of open foundation-bed on scouring and depositing is also discussed.In order to apply the research results to practical projects,the scale of model sediment and the scale of scours and depositions are suggested.展开更多
The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to e...The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to expand velocity potentials in each domain. In the eigen-expansion of the velocity potential, evanescent waves are included. Numerical results of the present model are compared with experimental data. The effect of porosity, the relative chamber width, the relative water depth in the wave absorbing chamber and the water depth in front of the structure are discussed.展开更多
Quarter circular breakwater （QCB） is a new-type breakwater developed from senti-circular breakwater （SCB）. The superstructure of QCB is composed of a quarter circular front wall, a horizontal base slab and a verti...Quarter circular breakwater （QCB） is a new-type breakwater developed from senti-circular breakwater （SCB）. The superstructure of QCB is composed of a quarter circular front wall, a horizontal base slab and a vertical rear wall. The width of QCB＇ s base slab is about half that of SCB, which makes QCB suitable to be used on relatively finn soil foundation. The numerical wave flume based on the Reynolds averaged Navier-Stokes equations for impressible viscosity fluid is adopted in this paper to simulate the hydraulic performances of QCB. Since the geometry of both breakwaters is similar and SCB has been studied in depth, the hydraulic performances of QCB are given in comparison with those of SCB.展开更多
Rubble mound breakwater, one of the protection structures, has been widely used in coastal and port engineering. Block stones were first used as its armor layer, and its use was limited to shallow sea areas where ther...Rubble mound breakwater, one of the protection structures, has been widely used in coastal and port engineering. Block stones were first used as its armor layer, and its use was limited to shallow sea areas where there is no large waves. Since the specially-shaped armor unit was developed, the rubble mound breakwater has become the main sort of the protection structures, which can be used in deep water zones where storm sometimes occurs. Owing to severe and complex surrounding conditions, the rubble mound breakwater failure sometimes occurs, thus the study on the causes of failure is of great importance. In the present study some breakwater failures at home and abroad are illustrated and the causes of failure are investigated from the point of view of design, test, construction and maintenance.展开更多
A series of physical tests are conducted to examine the characteristics of the wave loading exerted on circular-front breakwaters by regular waves. It is found that the wave trough instead of wave crest plays a major ...A series of physical tests are conducted to examine the characteristics of the wave loading exerted on circular-front breakwaters by regular waves. It is found that the wave trough instead of wave crest plays a major role in the failure of submerged circular caissons due to seaward sliding. The difference in the behavior of seaward and shoreward horizontal wave forces is explained based on the variations of dynamic pressure with wave parameters. A wave load model is proposed based on a modified first-order solution for the dynamic pressure on submerged circular-front caissons under a wave trough. This wave loading model is very useful for engineering design. Further studies are needed to include model uncertainties in the reliability assessment of the breakwater.展开更多
Interstitial flows in breakwater cores and seabeds are a key consideration in coastal and marine engineering designs and have a direct impact on their structural safety.In this paper,a unified fully coupled model for ...Interstitial flows in breakwater cores and seabeds are a key consideration in coastal and marine engineering designs and have a direct impact on their structural safety.In this paper,a unified fully coupled model for wave−permeable breakwater−porous seabed interactions is built based on an improved N−S equation.A numerical wave flume is constructed,and numerical studies are carried out by applying the finite difference method.In combination with a physical model test,the accuracy of the numerical simulation results is verified by comparing the calculated and measured values of wave height at measurement points and the seepage pressure within the breakwater and seabed.On this basis,the characteristics of the surrounding wave field and the internal flow field of the pore structure,as well as the evolution process of the fluctuating pore water pressure inside the breakwater and seabed,are further analyzed.The spatial distribution of the maximum fluctuating pore water pressure in the breakwater is compared between two cases by considering whether the seabed is permeable,and then the effect of seabed permeability on the dynamic pore water pressure in the breakwater is clarified.This study attempts to provide a reference for breakwater design and the protection of nearby seabeds.展开更多
One mountain-type breakwater consisting of two inclined plates and one vertical plate is proposed based on several types of traditional free surface breakwaters, including the horizontal plate, curtain wall, and trape...One mountain-type breakwater consisting of two inclined plates and one vertical plate is proposed based on several types of traditional free surface breakwaters, including the horizontal plate, curtain wall, and trapezoidal barriers. The interaction between the regular waves and the fixed free surface mountain-type breakwater is measured in one wave flume(15.0 m×0.6 m×0.7 m). The wave propagation, reflection, and transmission process are simulated using the VOF method and the hybrid SAS/laminar method. The simulated wave profiles are consistent with the experimental observations. For waves with a length smaller than four times width of the mountain-type breakwater, the reflected wave amplitudes are slightly larger than those of the vertical-plate breakwater, while the wave transmission coefficients are all smaller than 0.5, and the wave loss coefficients are larger than 0.7. The wave energy is dissipated by wave breaking on the windward inclined plate, and turbulent flow around the vertical plate and the leeward inclined plate.展开更多
The stability of single layer armour units on low crested and submerged breakwaters has been investigated in 2D hydraulic model tests. Armour unit movements including settlements, rocking and displacements have been d...The stability of single layer armour units on low crested and submerged breakwaters has been investigated in 2D hydraulic model tests. Armour unit movements including settlements, rocking and displacements have been determined. The effect of freeboard, packing density and wave steepness on the armour layer stability on crest, front and rear slope has been investigated. Armour units were mostly displaced in the most upper part of the seaward slope and at the seaward side of the crest. Damage on the crest was progressing towards the rear slope. About 40% to 50% larger armour units are required on the seaward slope and crest of low crested structures （as compared to conventional high crested breakwaters）. About 35% larger armour units are required on the rear slope. Larger armour units are not required on submerged breakwaters if the water depth on the crest exceeds 40% of design wave height.展开更多
A structure scheme of a pile-based breakwater with integrated oscillating water column(OWC)energy conversion chamber was proposed,and four structure forms had been designed.Based on the physical test,the variations of...A structure scheme of a pile-based breakwater with integrated oscillating water column(OWC)energy conversion chamber was proposed,and four structure forms had been designed.Based on the physical test,the variations of the reflected wave height,the transmitted wave height,the air velocity at the outlet of the chamber,the air pressure and the wave height in the air chamber were studied under the conditions of different wave heights,periods,with or without elliptical front wall and the baffles on both sides of the chamber.Moreover,based on the results,the changes and relationship between the wave-eliminating effect and energy conversion effect of the scheme were analyzed.In general,it turns out,the transmission coefficients of the four structure forms are kept below 0.5.Furthermore,the transmission coefficients of the structural forms G2,G3,and G4 were all smaller than 0.4,and it is only 0.1 at its smallest.Thereinto,in general,the structure form G4 has the best wave-eliminating and energy conversion performance.At the same time,when the wave steepness is 0.066,the energy conversion and wave dissipation effect of the four structure forms is the best.The research results could be provided as the reference for the design structure selection of pile-based breakwater with integrated OWC energy conversion chamber.展开更多
In this paper, the theoretical calculation of floating breakwater performance in regular waves with arbitrary wave direction is discussed. Under the hypothesis of linearized system and applying the strip theory, we ca...In this paper, the theoretical calculation of floating breakwater performance in regular waves with arbitrary wave direction is discussed. Under the hypothesis of linearized system and applying the strip theory, we can solve the boundary condition problems of diffraction potential and radiation potential. Introducing the asymptotic expression of the wave velocity potential at infinity and using wave energy conservation, we can separately calculate the transmitted waves generated by the sway, heave and roll motion of the floating breakwater and by the fixed breakwater. Finally, we define the amplitude ratio of the transmitted wave to the incident wave as the transmitted wave coefficient CT which describes the floating breakwater effectiveness. Two examples are given and the theoretical results obtained by the present method agree well with experimental results.展开更多
-The construction of breakwaters in China in more than 40 years since the founding of the People's Republic of China is reviewed. The construction of two main types of breakwater, upright breakwaters and rubble mo...-The construction of breakwaters in China in more than 40 years since the founding of the People's Republic of China is reviewed. The construction of two main types of breakwater, upright breakwaters and rubble mound breakwaters, and the way in which they are built are expounded. Recommendations to improve the technology for future breakwater construction are presented.展开更多
An open cellular caisson breakwater is a new type comoposite breakwater whose upper structure is an open chamfered caissons without bottom. It has the advantages of rational and compact configuration, good stability a...An open cellular caisson breakwater is a new type comoposite breakwater whose upper structure is an open chamfered caissons without bottom. It has the advantages of rational and compact configuration, good stability and low stress on its foundation ho.It is especially suitable for soft ground. The structural and hydraulic characteristics and the stability test results of this new type breakwater are presented in this paper.展开更多
The results of design and experiment of a submerged semi-circular breakwater at the Yangtze estuary show that the submerged structure will be unsafe when the general empirical wave force formula for semi-circular brea...The results of design and experiment of a submerged semi-circular breakwater at the Yangtze estuary show that the submerged structure will be unsafe when the general empirical wave force formula for semi-circular breakwater is used in design. Therefore, a new calculation method for the wave forces acting on a submerged semi-circular structure is given in this paper, in which the wave force acting on the inside circumference of semi-circular arch is included, and the phase modification coefficient in the general empirical formula is adjusted as well. The new wave force calculation method has been Verified by the results of seven related physical model tests and adopted in the design of the south esturary jetty of the first stage project of Deep Channel Improvement Project of the Yangtze River Estuary, the total jetty length being 17.5 km.展开更多
文摘The breakwaters have experienced many changes during their construction history.These changes have been considered to improve their performance,depending on their environmental conditions and applications.Numerical modelling was conducted using FLOW-3 D software.In this study,the wave overtopping from composite berm breakwater as new conceptual structure and the pressure imposed on the composite berm breakwater are considered and investigated.The results show a decrease of 84.01,70.88 and 61.42 percent of the wave overtopping in the composite berm breakwater,in comparison to the rubble mound breakwater,horizontally caisson breakwater and caisson breakwater,respectively.Also,the pressure applied to the composite berm breakwater with the pressure applied to the horizontally caisson breakwater was compared and evaluated.Composite berm breakwater compared with horizontally caisson breakwater in P1,the amount of the obtained pressure decreased by 52.09%,in P2 the amount of the obtained pressure decreased by 63.07%,in P3 decreased by 76.09%and in Pu,this pressure reduced by53.92%.For the composite berm breakwater,the impact of three types of berms,homogenous berm(Type 1),a berm consisting of armor-filter(Type 2)and multi-layer berm(Type 3)with the aim of optimizing the hydraulic responses and wave interaction on the caisson of the breakwater was examined and evaluated.In total,Type 3 will be recommended with a significant reduction in the overtopping values and maximum pressure.
基金supported by the National Natural Science Foundation of China Program(No.51739010).
文摘This study applies a double snap-through mechanism on a box-type oscillating buoy(OB)wave energy converter(WEC)-floating breakwater integrated system(OB WEC-FB)to simultaneously achieve efficient wave energy conversion and nearshore protection within a low-frequency bandwidth.This mechanism consists of four oblique springs and can operate in mono-stable,bi-stable,and tri-stable modes.A viscous-flow-based numerical model is established to investigate the hydrodynamic performance and dynamic behavior of the proposed multi-stable breakwater.The operational performance of the breakwater at different dynamic modes is first compared.The effects of the springs’original length and stiffness coefficient are then analyzed.The results show that the tri-stable breakwater has a wider resonance frequency tuning range than the bi-stable one,both of which outperform the mono-stable and linear ones in shifting the effective bandwidth to a lower frequency range.For a tri-stable breakwater,a large distance between outermost potential wells is conducive to tuning resonance frequency,whereas shallow potential wells limit this effect.The increase in spring stiffness distinctly causes a higher potential barrier and thus constrains the motion response of the breakwater.A well-designed double snap-through mechanism can excite large-amplitude inter-well motion,tune the resonance frequency of breakwater from 3.98 to 1.96 rad/s,and decrease the lower limit of the effective transmission bandwidth from 3.75 to 3.00 rad/s.It is crucial for improving the power absorption and wave attenuation capabilities of multi-stable OB WEC-FB.This study contributes to the limited research on the implementation of a double snap-through mechanism on multifunctional marine structures.It establishes the underlying connection between nonlinear dynamic behaviors and hydrodynamic coefficients.
基金financially supported by the National Natural Science Foundation of China(Grant No.52088102)New Cornerstone Science Foundation through the XPLORER PRIZE.
文摘Floating breakwaters(FBs)are commonly employed for the protection of coastal installations.In this work,a convextype floating breakwater(FB)is proposed,and its hydrodynamic characteristics are studied through systematic laboratory experiments.Two different deck widths and two different mooring systems are set in the experiment.The transmission coefficients,reflection coefficients,motion responses and mooring forces of convex-type FBs are obtained in experiments.The influences of the deck width and mooring system on the hydrodynamic characteristics of the proposed FB are analyzed and compared.The experimental results show that the reflection coefficient and mooring force of the convex-type FB with a cross-mooring system are significantly larger than those of the convextype FB with a parallel-mooring system.A convex-type FB with a larger deck width has a higher reflection coefficient.The convex-type FBs with cross-and parallel-mooring systems have similar surge and heave motions,but the cross-mooring results in small roll motion.In addition,reliable prediction formulas for the transmission coefficient of convex-type FBs with different mooring systems have been developed,which are important for engineering design.
基金supported by Vellore Institute of Technology,Vellore,under a SEED grant(Sanction Order No.SG20230081)。
文摘This study investigates the performance of dual curved-leg pontoon floating breakwaters in finite water depth under the assumption of linear wave theory. The analysis is carried out for four different models of curvedleg geometries, which are combinations of convex and concave shapes. The models are classified as follows. Model-1: Seaside and leeside face concave, Model-2: Seaside and leeside face convex, Model-3: Seaside face convex and leeside face concave, and Model-4: Seaside face concave and leeside face convex. The Boundary Element Method is utilized in order to find a solution to the associated boundary value problem. The numerical results are validated against existing analytical and experimental data. Further, the study examines the wave reflection, wave transmission, and the hydrodynamic forces acting on the structure for different values of waves and structural parameters. Overall, the different dual curved-leg pontoon breakwaters are more effective, reducing wave transmission by over 15% and increasing wave reflection by more than 5% compared to traditional models. The study shows that the wave reflected by Model 1 significantly increased and attenuated the wave transmission relative to other models. The study found that the height of the curved-leg of Model 1 plays a critical role in blocking waves and redirecting the flow. More precisely, the present analysis concludes that the hydrodynamic performance of Model-1 presents an optimized breakwater design that outperforms the proposed models.
基金Supported by Shandong Provincial Natural Science Foundation,China(ZR2020ME259)Open Fund of Shandong Key Laboratory of Civil Engineering Disaster Prevention and Mitigation(CDPM2021KF21).
文摘Two asymmetric types of floating breakwaters integrated with a wave energy converter(WEC-FBs),a floating square box with a triangle(trapezoidal type)or a wave baffle(L type)attached to its rear side,have been proposed.In this research,the hydrodynamic performance,including capture width ratio(CWR),wave transmission coefficient,heave motion,and force coefficient,were studied and compared between the two types.A numerical simulation model based on the Navier-Stokes equation was employed.The effects of power take-off(PTO)damping coefficient,wave periods,and draft/displacement on the hydrodynamic performance of the two structure shapes were simulated and investigated.The results reveal that the L type performs better in shorter wave periods,and the trapezoidal type exhibits a higher CWR in intermediate wave periods.This study offers knowledge of the design and protection of the two WEC-FB types.
基金supported by the China National Funds for Distinguished Young Scientists(Grant No.52025112)the National Natural Science Foundation of China(Grant Nos.52331011 and 52301322)the Jiangsu Provincial Natural Science Foundation(Grant No.BK20220653).
文摘The wave attenuation performance of a floating breakwater is important in engineering applications.On the basis of potential flow theory,the analytical and simplified solutions of the transmission coefficient of a floating breakwater are deduced via velocity potential decompositions and eigenfunction expansions.The effects of the floating breakwater configuration,working sea state and motion response on the wave attenuation performance are described,facilitating a deeper investigation into the wave attenuation mechanism of the breakwater.The results indicate that the width and draft of the breakwater,incident wavelength,and motion response significantly affect the transmission coefficient of the breakwater.The wave passability rate,α1(α1=0.5−2B/L),is defined to qualitatively explain why long-period waves are difficult to control and attenuate.The radiation effect caused by the motion of the floating breakwater on the transmission coefficient is relatively complex,and the wave attenuation efficiency of the breakwater can be improved by optimizing the motion response.The incident wavelength and breakwater width are selected as the control parameters,and transmission coefficient charts of the floating breakwater for two-dimensional conditions are drawn,providing technical guidance for the configuration selection and design of the floating breakwater.
基金financially supported by the Fundamental Research Funds for the Central Universities (Grant Nos.B200202087 and B200204032)the National Natural Science Foundation of China (Grant No.51609071)。
文摘Rubble mound breakwaters, a prevalent type of sloping breakwater structure, are extensively employed in port and coastal infrastructure projects. Under soft soil foundation conditions, the process of squeezing silt by riprap is implemented to enhance bearing capacity through soft soil replacement and compaction. However, predicting the depth law of squeezing silt by riprap and understanding its mechanism remain significant engineering design challenges.This study employs particle flow code(PFC) based on the discrete element method to simulate the squeezing silt process by riprap, examining variations in depth law under different geological conditions and its mechanical characteristics.Through calibration of the PFC model's meso-parameters via macro-experiments, the study analyzes the effects of riprap size, drop height, and soft soil properties on the depth law of squeezing silt. Findings demonstrate that riprap drop height and soft soil thickness substantially influence the depth, while appropriate calibration of meso-parameters enhances simulation accuracy. This research contributes theoretical and practical guidance for optimizing rubble mound breakwater design, understanding squeezing silt mechanisms, construction practices, and riprap quantity estimation.
基金the National Natural Science Foundation of China!(No.599790 1 9)
文摘The sea bottom in front of a breakwater is scoured under the action of broken waves,and this will affect the stability of the breakwater.In this paper,the scours of sandy seabed in front of a breakwater under the action of broken waves are investigated experimentally.The depth and range of the scouring trough at the foot of a breakwater are studied,and the influence of open foundation-bed on scouring and depositing is also discussed.In order to apply the research results to practical projects,the scale of model sediment and the scale of scours and depositions are suggested.
基金by Joint Fund of the National Natural Science Foundation of China the Hong Kong Science Research Bureau (49910161985)+1 种基金the National Natural Science Foundation of China (50025924,50179004)the Research Fund for the Development of harbor engineeri
文摘The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to expand velocity potentials in each domain. In the eigen-expansion of the velocity potential, evanescent waves are included. Numerical results of the present model are compared with experimental data. The effect of porosity, the relative chamber width, the relative water depth in the wave absorbing chamber and the water depth in front of the structure are discussed.
基金supported by the National Natural Science Foundation of China(Grant No.50779045)
文摘Quarter circular breakwater （QCB） is a new-type breakwater developed from senti-circular breakwater （SCB）. The superstructure of QCB is composed of a quarter circular front wall, a horizontal base slab and a vertical rear wall. The width of QCB＇ s base slab is about half that of SCB, which makes QCB suitable to be used on relatively finn soil foundation. The numerical wave flume based on the Reynolds averaged Navier-Stokes equations for impressible viscosity fluid is adopted in this paper to simulate the hydraulic performances of QCB. Since the geometry of both breakwaters is similar and SCB has been studied in depth, the hydraulic performances of QCB are given in comparison with those of SCB.
文摘Rubble mound breakwater, one of the protection structures, has been widely used in coastal and port engineering. Block stones were first used as its armor layer, and its use was limited to shallow sea areas where there is no large waves. Since the specially-shaped armor unit was developed, the rubble mound breakwater has become the main sort of the protection structures, which can be used in deep water zones where storm sometimes occurs. Owing to severe and complex surrounding conditions, the rubble mound breakwater failure sometimes occurs, thus the study on the causes of failure is of great importance. In the present study some breakwater failures at home and abroad are illustrated and the causes of failure are investigated from the point of view of design, test, construction and maintenance.
基金financially supported by the Open Fund of the State Key Laboratory of Hydraulic Engineering Simulation and Safety from Tianjin University(Gtant No.HESS-1310)the Natural Science Foundation of Tianjin,China(Gtant No.14JCYBJC22100)+5 种基金the National Natural Science Foundation of China(Gtant No.51509178)supported by the State Scholarship Fund of China Scholarship Council(Gtant No.201308120008)supported by the Physical Oceanography Program of National Science Foundation(Grant No.1436642)the Maine Sea Grant and NOAA for Grant No.NA10OAR4170072part of EFRaCC project funded by the British Council under its Global Innovation Initiativethe open fund research at the State Key Laboratory of Hydraulics and Mountain River at Sichuan University(Grant No.SKHL1311)
文摘A series of physical tests are conducted to examine the characteristics of the wave loading exerted on circular-front breakwaters by regular waves. It is found that the wave trough instead of wave crest plays a major role in the failure of submerged circular caissons due to seaward sliding. The difference in the behavior of seaward and shoreward horizontal wave forces is explained based on the variations of dynamic pressure with wave parameters. A wave load model is proposed based on a modified first-order solution for the dynamic pressure on submerged circular-front caissons under a wave trough. This wave loading model is very useful for engineering design. Further studies are needed to include model uncertainties in the reliability assessment of the breakwater.
基金supported by the National Key R&D Program of China(Grant No.2019YFB1600702)the Scientific Research Project of Yangtze-to-Huaihe Water Diversion Project(Grant No.YJJH-YJJC-ZX-20191106220)+1 种基金the Nanjing Hydraulic Research Institute Special Fund for Basic Scientific Research of Central Public Research Institutes(Grant Nos.Y220002 and Y220013)the Water Conservancy Science and Technology Project of Jiangsu Province(Grant No.2019009).
文摘Interstitial flows in breakwater cores and seabeds are a key consideration in coastal and marine engineering designs and have a direct impact on their structural safety.In this paper,a unified fully coupled model for wave−permeable breakwater−porous seabed interactions is built based on an improved N−S equation.A numerical wave flume is constructed,and numerical studies are carried out by applying the finite difference method.In combination with a physical model test,the accuracy of the numerical simulation results is verified by comparing the calculated and measured values of wave height at measurement points and the seepage pressure within the breakwater and seabed.On this basis,the characteristics of the surrounding wave field and the internal flow field of the pore structure,as well as the evolution process of the fluctuating pore water pressure inside the breakwater and seabed,are further analyzed.The spatial distribution of the maximum fluctuating pore water pressure in the breakwater is compared between two cases by considering whether the seabed is permeable,and then the effect of seabed permeability on the dynamic pore water pressure in the breakwater is clarified.This study attempts to provide a reference for breakwater design and the protection of nearby seabeds.
基金financially supported by the National Natural Science Foundation of China (Grant No. 11802348)the National Project of China (Grant Nos. 6140206040301 and 41407010501)。
文摘One mountain-type breakwater consisting of two inclined plates and one vertical plate is proposed based on several types of traditional free surface breakwaters, including the horizontal plate, curtain wall, and trapezoidal barriers. The interaction between the regular waves and the fixed free surface mountain-type breakwater is measured in one wave flume(15.0 m×0.6 m×0.7 m). The wave propagation, reflection, and transmission process are simulated using the VOF method and the hybrid SAS/laminar method. The simulated wave profiles are consistent with the experimental observations. For waves with a length smaller than four times width of the mountain-type breakwater, the reflected wave amplitudes are slightly larger than those of the vertical-plate breakwater, while the wave transmission coefficients are all smaller than 0.5, and the wave loss coefficients are larger than 0.7. The wave energy is dissipated by wave breaking on the windward inclined plate, and turbulent flow around the vertical plate and the leeward inclined plate.
文摘The stability of single layer armour units on low crested and submerged breakwaters has been investigated in 2D hydraulic model tests. Armour unit movements including settlements, rocking and displacements have been determined. The effect of freeboard, packing density and wave steepness on the armour layer stability on crest, front and rear slope has been investigated. Armour units were mostly displaced in the most upper part of the seaward slope and at the seaward side of the crest. Damage on the crest was progressing towards the rear slope. About 40% to 50% larger armour units are required on the seaward slope and crest of low crested structures （as compared to conventional high crested breakwaters）. About 35% larger armour units are required on the rear slope. Larger armour units are not required on submerged breakwaters if the water depth on the crest exceeds 40% of design wave height.
基金financially supported by the National Natural Science Foundation of China(Grant No.51739010)。
文摘A structure scheme of a pile-based breakwater with integrated oscillating water column(OWC)energy conversion chamber was proposed,and four structure forms had been designed.Based on the physical test,the variations of the reflected wave height,the transmitted wave height,the air velocity at the outlet of the chamber,the air pressure and the wave height in the air chamber were studied under the conditions of different wave heights,periods,with or without elliptical front wall and the baffles on both sides of the chamber.Moreover,based on the results,the changes and relationship between the wave-eliminating effect and energy conversion effect of the scheme were analyzed.In general,it turns out,the transmission coefficients of the four structure forms are kept below 0.5.Furthermore,the transmission coefficients of the structural forms G2,G3,and G4 were all smaller than 0.4,and it is only 0.1 at its smallest.Thereinto,in general,the structure form G4 has the best wave-eliminating and energy conversion performance.At the same time,when the wave steepness is 0.066,the energy conversion and wave dissipation effect of the four structure forms is the best.The research results could be provided as the reference for the design structure selection of pile-based breakwater with integrated OWC energy conversion chamber.
文摘In this paper, the theoretical calculation of floating breakwater performance in regular waves with arbitrary wave direction is discussed. Under the hypothesis of linearized system and applying the strip theory, we can solve the boundary condition problems of diffraction potential and radiation potential. Introducing the asymptotic expression of the wave velocity potential at infinity and using wave energy conservation, we can separately calculate the transmitted waves generated by the sway, heave and roll motion of the floating breakwater and by the fixed breakwater. Finally, we define the amplitude ratio of the transmitted wave to the incident wave as the transmitted wave coefficient CT which describes the floating breakwater effectiveness. Two examples are given and the theoretical results obtained by the present method agree well with experimental results.
文摘-The construction of breakwaters in China in more than 40 years since the founding of the People's Republic of China is reviewed. The construction of two main types of breakwater, upright breakwaters and rubble mound breakwaters, and the way in which they are built are expounded. Recommendations to improve the technology for future breakwater construction are presented.
文摘An open cellular caisson breakwater is a new type comoposite breakwater whose upper structure is an open chamfered caissons without bottom. It has the advantages of rational and compact configuration, good stability and low stress on its foundation ho.It is especially suitable for soft ground. The structural and hydraulic characteristics and the stability test results of this new type breakwater are presented in this paper.
文摘The results of design and experiment of a submerged semi-circular breakwater at the Yangtze estuary show that the submerged structure will be unsafe when the general empirical wave force formula for semi-circular breakwater is used in design. Therefore, a new calculation method for the wave forces acting on a submerged semi-circular structure is given in this paper, in which the wave force acting on the inside circumference of semi-circular arch is included, and the phase modification coefficient in the general empirical formula is adjusted as well. The new wave force calculation method has been Verified by the results of seven related physical model tests and adopted in the design of the south esturary jetty of the first stage project of Deep Channel Improvement Project of the Yangtze River Estuary, the total jetty length being 17.5 km.
