Bubble breakup at T-junction microchannels is the basis for the numbering-up of gas−liquid two-phase flow in parallelized microchannels. This article presents the bubble breakup in viscous liquids at a microfluidic T-...Bubble breakup at T-junction microchannels is the basis for the numbering-up of gas−liquid two-phase flow in parallelized microchannels. This article presents the bubble breakup in viscous liquids at a microfluidic T-junction. Nitrogen is used as the gas phase, and glycerol-water mixtures with different mass concentration of glycerol as the liquid phase. The evolution of the gas−liquid interface during bubble breakup at the microfluidic T-junction is explored. The thinning of the bubble neck includes the squeezing stage and the rapid pinch-off stage. In the squeezing stage, the power law relation is found between the minimum width of the bubble neck and the time, and the values of exponents α1 and α2 are influenced by the viscous force. The values of pre-factors m_(1) and m_(2) are negatively correlated with the capillary number. In the rapid pinch-off stage, the thinning of the bubble neck is predominated by the surface tension, and the minimum width of the bubble neck can be scaled with the remaining time as power-law. The propagation of the bubble tip can be characterized by the power law between the movement distance and the time, with decreasing exponent as increased liquid viscosity.展开更多
Large-scale Danian-age(post-K/Pg boundary)Deccan magmatism is well known from the Mumbai metropolitan area,located in the structurally complex Panvel flexure zone along the western Indian rifted continental margin.Thi...Large-scale Danian-age(post-K/Pg boundary)Deccan magmatism is well known from the Mumbai metropolitan area,located in the structurally complex Panvel flexure zone along the western Indian rifted continental margin.This compositionally diverse late-Deccan magmatic suite contains subaerial tholeiitic lavas and dykes typical of the main Deccan province,with many features atypical of the Deccan,such as spilitic pillow lavas,“intertrappean”sediments(often containing considerable volcanic ash),rhyolitic lavas and tuffs,gabbro-granophyre intrusions,and trachyte intrusions containing alkali basalt enclaves.Most of these units,previously dated at 62.5 Ma to 61 Ma,are contemporaneous with or slightly postdate the 62.5 Ma India-Seychelles continental breakup and Panvel flexure formation.In the Dongri-Uttan area,two samples of a>50-m-thick,columnar-jointed rhyolite from the Darkhan Quarry and from a section behind the current Uttan Sagari Police Station have previously been dated at 62.6±0.6 Ma and 62.9±0.2 Ma(^(40)Ar/^(39)Ar,2r errors).New exposures reveal that these two statistically indistinguishable 40 Ar/39 Ar ages correspond to two distinct rhyolite units,separated by well-bedded silicic ash.The columnar rhyolites are microcrystalline,composed of quartz and alkali feldspar,with rare small(1–2 mm),altered feldspar phenocrysts,and no recognisable relict vitroclasts.Given the westerly structural dip,most of their lateral extent is submerged under the Arabian Sea,and we consider them to be possible flood rhyolite lavas.We interpret the ash beds,composed of pumice clasts and glass shards,as a low-grade(nonwelded)vitric ash,derived from a possibly distal Plinian eruption and deposited by fallout.The lavas and ash are peraluminous rhyolites.The lavas are Sr-Ba-poor and Rb-Zr-Nb-rich,and show“seagull-shaped”rare earth element patterns with deep negative europium anomalies.These crystal-poor lavas are“hot-dry-reduced”rhyolites typical of intraplate,continental rift and rifted margin settings.The very different high-field strength element contents of the lavas and the ash indicate compositionally distinct magma batches.The 62.5 Ma Dongri-Uttan sequence provides clear evidence for rapid silicic eruptions of effusive and explosive nature,alternating with each other and sourced from distinct magma chambers and eruptive vents.A newly identified,highly feldspar-phyric trachyte intrusion marks the last phase of magmatic activity in the area,corresponding with late-stage trachyte-syenite intrusions exposed in coastal western India and the Seychelles,and shows that the Mumbai rhyolites and trachytes form a compositional continuum.展开更多
A new detector array with a large solid angle coverage for the coincidence measurement of charged fragments was developed to study the breakup reaction mechanisms of weakly bound nuclear systems at energies around the...A new detector array with a large solid angle coverage for the coincidence measurement of charged fragments was developed to study the breakup reaction mechanisms of weakly bound nuclear systems at energies around the Coulomb barrier.The array has been used to explore the breakup reaction mechanisms of^(6,7)Li+^(209)Bi systems at E_(beam)=30,40,47 MeV,showing good performance in particle identification and complete kinematic measurements.Based on this,different breakup modes and breakup components were clearly distinguished,and some new breakup modes were discovered,such as^(7)Li→α+t breakup mode in6Li+209Bi system and^(7)Li→^(6)He+p breakup mode in^(7)Li+^(209)Bi system.This array can also be used to explore other breakup reaction mechanisms induced by weakly bound nuclei.展开更多
For the solutions of random variations of metal jet breakup and difficulties in controlling and predicting the process parameters （e.g. jet length） in micro droplet deposition manufacturing technique, experimental m...For the solutions of random variations of metal jet breakup and difficulties in controlling and predicting the process parameters （e.g. jet length） in micro droplet deposition manufacturing technique, experimental methods combining with theoretical analyses have been developed. The jet formation, jet length and their dominant factors （oxygen concentration and disturbance frequency, etc.） are discussed. The statistical law of jet length is found that the probability density function （PDF） of jet length is a log-normal distribution. The results show that the formation and size accuracy of metal jet breakup are improved by adjusting the gas pressure and optimizing the disturbance frequency. Under this circumstance, the jet length and morphological deviation can be minimized, which provides a stable droplet stream for the subsequent manufacturing process.展开更多
This article studies numerically a familiar important phenomenon in spray combustion which is deformation and breakup of liquid drops in gas flow. The SIMPLER method is used to solve the two-dimensional （2D） unstead...This article studies numerically a familiar important phenomenon in spray combustion which is deformation and breakup of liquid drops in gas flow. The SIMPLER method is used to solve the two-dimensional （2D） unsteady axisymmetric Navier-Stokes equations for both the drop and the ambient gas flow. The level set method is applied to capturing the liquid/gas interface. Through calculation are obtained four typical breakup modes--oscillation, bag breakup, sheet stripping breakup and shear breakup governed by four non-dimensional numbers which are gas Weber number （Weg）, liquid Reynolds number （Rel）, gas Reynolds number （Reg） and density ratio （γ）. Their effects upon each mode are analyzed. The results indicate that among the four numbers, Weg is of the highest importance with Rel, Reg and γfollowing up. By widening the range of the density ratio up to 1 000, the breakup mode is discovered to be so complicated that a new one called multimode breakup mode turns up. This mode contains the shearing breakup and piercing breakup, which successively happen. The calculation results agree well with what is observed from the experiments.展开更多
By releasing liquid drops in turbulent jet flows,we investigated the transformation of single drop breakup from binary to ternary and multiple.Silicone oil and deionized water were the dispersed phase and continuous p...By releasing liquid drops in turbulent jet flows,we investigated the transformation of single drop breakup from binary to ternary and multiple.Silicone oil and deionized water were the dispersed phase and continuous phase,respectively.The probability of binary,ternary,and multiple breakup of oil drops in jet flows is a function of the jet Reynolds number.To address the underlying mechanisms of this transformation of drop breakup,we performed two-dimensional particle image velocimetry(PIV)experiments of single-phase jet flows.With the combination of drop breakup phenomenon and two-dimensional PIV results in a single-phase flow field,these transformation conditions can be estimated:the capillary number ranges from 0.17 to 0.27,and the Weber number ranges from 55 to 111.展开更多
In the Mesoproterozoic time, the northern part of the Sino-Korean Plate experienced a period of intensive tectonic extension and breakup. 1. An abundance of sedimentary earthquake records is preserved in the Chuanling...In the Mesoproterozoic time, the northern part of the Sino-Korean Plate experienced a period of intensive tectonic extension and breakup. 1. An abundance of sedimentary earthquake records is preserved in the Chuanlinggou, Tuanshanzi and Gaoyuzhuang formations in the Mesoproterozoic Changcheng System （1800-1400 Ma） and in the Mesoproterozoic Wumishan Formation of the Jixian System （1400-1000 Ma）. These earthquake records are characterized by various liquefied sand-veins, carbonate microspar and coarser spar veins, limestone dikes, liquefied breccia and various forms of liquefied contorted bedding. This deformation is always associated with synsedimentary faults and igneous activity. 2. Three liquefaction models for soft carbonate sediments are recognized, including liquefaction in laminated carbonate rocks, liquefaction in thin-bedded carbonates and large-scale liquefaction along huge carbonate dikes. 3. Based on the record of earthquake and volcanic activities, the Sino-Korean Plate experienced at least twice intraplate breakups. One occurred between 1800-1400 Ma, and the other occurred at about 1200 Ma. The last breakup resulted in formation of the Yan-Liao aulacogen, a tectonic zone characterized by deeper material vibrancy, active faults, major igneous activity and frequent earthquakes.展开更多
Understanding the dominant force responsible for supercontinent breakup is crucial for establishing Earth＇s geodynamic evolution that includes supercontinent cycles and plate tectonics. Conventionally,two forces have...Understanding the dominant force responsible for supercontinent breakup is crucial for establishing Earth＇s geodynamic evolution that includes supercontinent cycles and plate tectonics. Conventionally,two forces have been considered： the push by mantle plumes from the sub-continental mantle which is called the active force for breakup, and the dragging force from oceanic subduction retreat which is called the passive force for breakup. However, the relative importance of these two forces is unclear. Here we model the supercontinent breakup coupled with global mantle convection in order to address this question. Our global model features a spherical harmonic degree-2 structure, which includes a major subduction girdle and two large upwelling（superplume） systems. Based on this global mantle structure,we examine the distribution of extensional stress applied to the supercontinent by both subsupercontinent mantle upwellings and subduction retreat at the supercontinent peripheral. Our results show that：（1） at the center half of the supercontinent, plume push stress is ～3 times larger than the stress induced by subduction retreat;（2） an average hot anomaly of no higher than 50 K beneath the supercontinent can produce a push force strong enough to cause the initialization of supercontinent breakup;（3） the extensional stress induced by subduction retreat concentrates on a ～600 km wide zone on the boundary of the supercontinent, but has far less impact to the interior of the supercontinent. We therefore conclude that although circum-supercontinent subduction retreat assists supercontinent breakup, sub-supercontinent mantle upwelling is the essential force.展开更多
Based on the linear analysis of stability, a dispersion equation is deduced which delineates the evolution of a general 3-dimensional disturbance on the free surface of an incompressible viscous liquid jet, With respe...Based on the linear analysis of stability, a dispersion equation is deduced which delineates the evolution of a general 3-dimensional disturbance on the free surface of an incompressible viscous liquid jet, With respect to the spatial growing disturbance mode, the numerical results obtained from the solution of the dispersion equation reveal that a dimensionless parameter J(e) exists. As J(e) > 1, the axisymmetric disturbance mode is most unstable; and when J(e) < 1, the asymmetric disturbances come into being, their growth rate increases with the decrease of J(e), till one of them becomes the most unstable disturbance. The breakup of a low-speed liquid jet results from the developing of axisymmetric disturbances, whose instability is produced by the surface tension; while the atomization of a high-speed Liquid jet is brought about by the evolution of nonaxisymmetric disturbance, whose instability is caused by the aerodynamic force on the interface between the jet and the ambient gas.展开更多
The stratospheric polar vortex breakup （SPVB） is an important phenomenon closely related to the seasonal transition of stratospheric circulation. In this paper, 62-year NCEP/NCAR reanalysis data were employed to inv...The stratospheric polar vortex breakup （SPVB） is an important phenomenon closely related to the seasonal transition of stratospheric circulation. In this paper, 62-year NCEP/NCAR reanalysis data were employed to investigate the distinction between early and late SPVB. The results showed that the anomalous circulation signals extending from the stratosphere to the troposphere were reversed before and after early SPVB, while the stratospheric signals were consistent before and after the onset of late SPVB. Arctic Oscillation （AO） evolution during the life cycle of SPVB also demonstrated that the negative AO signal can propagate downward after early SPVB. Such downward AO signals could be identified in both geopotential height and temperature anomalies. After the AO signal reached the lower troposphere, it influenced the Aleutian Low and Siberian High in the troposphere, leading to a weak winter monsoon and large-scale warming at mid latitudes in Asia. Compared to early SPVB, downward propagation was not evident in late SPVB. The high-latitude tropospheric circulation in the Northern Hemisphere was affected by early SPVB, causing it to enter a summer circulation pattern earlier than in late SPVB years.展开更多
Supercavitation in the diesel nozzle increases the instability of droplets in part due to the two-phase mixture, while the effect of cavitation bubbles on the instability of drops is still unclear. In order to investi...Supercavitation in the diesel nozzle increases the instability of droplets in part due to the two-phase mixture, while the effect of cavitation bubbles on the instability of drops is still unclear. In order to investigate the breakup of cavitation bubbles within the diesel droplet, a new mathematical model describing the disturbance growth rate of the diesel bubble instability is developed. The new mathematical model is applied to predict the effects of fluids viscosity on the stability of cavitation bubbles. The predicted values reveal that the comprehensive effect of fluids viscosity makes cavitation bubbles more stable. Compared with the viscosities of air and cavitation bubble, the diesel droplet＇s viscosity plays a dominant role on the stability of cavitation bubbles. Furthermore, based on the modified bubble breakup criterion, the effects of bubble growth speed, sound speed, droplet viscosity, droplet density, and bubble-droplet radius ratio on the breakup time and the breakup radius of cavitation bubbles are studied respectively. It is found that a bubble with large bubble-droplet radius ratio has the initial condition for breaking easily. For a given bubble-droplet radius ratio （0.2）, as the bubble growth speed increases （from 2 m/s to 60 m/s）, the bubble breakup time decreases（from 3.59 gs to 0.17 ps） rapidly. Both the greater diesel droplet viscosity and the greater diesel droplet density result in the increase of the breakup time. With increasing initial bubble-droplet radius ratio （from 0.2 to 0.8）, the bubble breakup radius decreases （from 8.86 trn to 6.23 tm）. There is a limited breakup radius for a bubble with a certain initial bubble-droplet radius ratio. The mathematical model and the modified bubble breakup criterion are helpful to improve the study on the breakup mechanism of the secondary diesel droplet under the condition of supercavitation.展开更多
Molten slag is broken up by supersonic air into droplets through the air quenching dry slag granulation technique.The breakup process of blast furnace slag directly determines the droplet diameter and the waste heat r...Molten slag is broken up by supersonic air into droplets through the air quenching dry slag granulation technique.The breakup process of blast furnace slag directly determines the droplet diameter and the waste heat recovery.In order to gain deep insight into the granulation mechanism and visualize the breakup process,three-dimensional unsteady numerical simulation based on the k-x based shear stress transport turbulence model was conducted to simulate the transient breakup process of molten slag(k is the turbulent kinetic energy,and x is the specific dissipation rate).The coupled level-set and volume-of-fluid method was utilized to capture the sharp air–liquid interface.The results show that a flat film is formed firstly under the effects of air impingement,recirculation zone and pressure gradients.Then,the axial wave and the spanwise wave appear simultaneously and the film is broken up into ligaments owing to the generation of vortex and hole structure at the intersection of axial trough and spanwise trough.Finally,the ligaments are broken up into droplets owing to Rayleigh–Taylor instability at the air–liquid interface.The droplets smaller than 3.00 mm account for 80%,with the average diameter of 1.95 mm.展开更多
Primary breakup in a liquid-liquid pintle injector element at different radial jet velocities is investigated to elucidate the impingement morphology,the formation of primary breakup spray half cone angle,the pressure...Primary breakup in a liquid-liquid pintle injector element at different radial jet velocities is investigated to elucidate the impingement morphology,the formation of primary breakup spray half cone angle,the pressure distribution,the liquid diameter distribution,and the liquid velocity distribution.With a sufficient mesh resolution,the liquid morphology can be captured in a physically sound way.A mushroom tip is triggered by a larger radial jet velocity and breakup happens at the tip edge first.Different kinds of ligament breakup patterns due to aerodynamic force and surface tension are captured on the axial sheet.A high pressure core is spotted at the impinging point region.A larger radial jet velocity can feed more disturbances into the impinging point and the axial sheet,generate stronger vortices to promote the breakup process at a longer distance,and form a larger spray half cone angle.Because of the re-collision phenomenon the axial sheet diameter does not decrease monotonically.The inner rim on the axial sheet shows a larger diameter magnitude and a lower velocity magnitude due to surface tension.This paper is expected to provide a reference for the optimum design of a liquid-liquid pintle injector.展开更多
An experimental study on the breakup of a conical liquid sheet from a pressure swirl atomizer was conducted by using a Particle Image Velocimetry (PIV) system. The variation of wavelength, wave speed and amplitude of ...An experimental study on the breakup of a conical liquid sheet from a pressure swirl atomizer was conducted by using a Particle Image Velocimetry (PIV) system. The variation of wavelength, wave speed and amplitude of wave versus liquid pressure was obtained. The results indicate that the cone half angle increases with liquid pressure. The stripped half wavelength liquid fragment seems to break into a series of drops immediately and no obvious contraction from liquid fragment to ligament is seen. The recorded images also show that both short and long wavelength waves exist simultaneously, and influence the breakup of the conical liquid sheet. The result of this study is useful for the purpose of developing and verifying the atomization model of spray produced by a pressure swirl atomizer.展开更多
The Baiyun （白云） sag in the southern Pearl River Mouth basin is the largest and deepest sag in deepwater northern South China Sea. Researches and exploration in this sag have revealed many distinct features of the ...The Baiyun （白云） sag in the southern Pearl River Mouth basin is the largest and deepest sag in deepwater northern South China Sea. Researches and exploration in this sag have revealed many distinct features of the sag. This article reports its Idling history through backstripping of depth data of interpreted sequence boundaries. Maps of sediment rates of 10 sequences from 49 Ma to the present were constructed, showing the spatio-temporal variation of the sediment rate. Three stages of sediment infilling, 49-17.5 Ma, 17.5-10.5 Ma, and 10.5-0 Ma, were divided by abrupt changes of sedimentary patterns. If the breakup of the South China Sea took place at -30 Ma, significant post-breakup acceleration of sedimentation was observed at 17.5-15.5 Ma and 13.8-12.5 Ma, indicating acceleration of subsidence at these times. We propose that the onset of strong post-breakup subsidence at ～17.5 Ma was an important tectonic event that changed the pattern of sedimentation from discrete and medium-rate deposition centers in both main and south subsags to restricted but high-rate deposition in the main subsag. The cause and implications of this newly recognized event need to be investigated.展开更多
Geodynamic drivers for the supercontinent cycle are generally attributed to either top-down(subduction-related)or bottom-up(mantle-related)processes.Compiled geochemical data and U-Pb ages and Hf isotopic signatures f...Geodynamic drivers for the supercontinent cycle are generally attributed to either top-down(subduction-related)or bottom-up(mantle-related)processes.Compiled geochemical data and U-Pb ages and Hf isotopic signatures for magmatic and detrital zircons from the Tarim Craton reveal a distinct change in subduction style during the Neoproterozoic.The subduction cycle is recorded in increasing and decreasing intensity of subduction-related magmatic rocks and time-equivalent sedimentary successions,and converse trends ofεHf(t)values and corresponding changes in crustal incubation time.These trends are consistent with a switch from advancing to retreating subduction.The switch likely occurred at ca.760 Ma when zirconεHf(t)values increase and crustal incubation times decrease following a transitional shift between 800 Ma and 760 Ma.A switch at this time is consistent with Rodinia breakup and may have resulted in the late Neoproterozoic Tarim rift basin.The long-lived(ca.500 Ma)subduction recorded in the Tarim Craton suggests the predominance of a top-down process for Rodinia breakup on this part of its margin.展开更多
The experimental results of the deformation and breakup of a single drop immersed in a Newtonian liq-uid and subjected to a constant shear rate which generated by counter rotating Couette apparatus were presented in t...The experimental results of the deformation and breakup of a single drop immersed in a Newtonian liq-uid and subjected to a constant shear rate which generated by counter rotating Couette apparatus were presented in this paper. From experimental observations, the breakup occurred by three mechanisms, namely, necking, end pinching, and capillary instability. Quantitative results for the deformation and breakup of drop are presented. The maximum diameter and Sauter mean diameter of daughter drops and capillary thread radius are linearly related to the inverse shear rate and independent of the initial drop size, the dimensionless wavelength which is the wave-length divided by the thread width at breakup is independent of the shear rate and initial drop size, and the deforma-tion of threads follows a pseudo-affine deformation for Cai/Cac larger than 2.展开更多
A modified mathematical model is used to study the effects of various forces on the stability of cavitation bubbles within a diesel droplet. The principal finding of the work is that viscous forces of fluids stabilize...A modified mathematical model is used to study the effects of various forces on the stability of cavitation bubbles within a diesel droplet. The principal finding of the work is that viscous forces of fluids stabilize the cavitation bubble, while inertial force destabilizes the cavitation bubble. The droplet viscosity plays a dominant role on the stability of cavitation bubbles compared with that of air and bubble. Bubble–droplet radius ratio is a key factor to control the bubble stability, especially in the high radius ratio range. Internal hydrodynamic and surface tension forces are found to stabilize the cavitation bubble, while bubble stability has little relationship with the external hydrodynamic force. Inertia makes bubble breakup easily, however, the breakup time is only slightly changed when bubble growth speed reaches a certain value(50 m·s-1). In contrast, viscous force makes bubble hard to break. With the increasing initial bubble–droplet radius ratio, the bubble growth rate increases, the bubble breakup radius decreases, and the bubble breakup time becomes shorter.展开更多
The deformation of moving slug bubbles and its influence on the bubble breakup dynamics in microchannel were studied.Three bubble morphologies were found in the experiment:slug,dumbbell and grenade shapes.The viscosit...The deformation of moving slug bubbles and its influence on the bubble breakup dynamics in microchannel were studied.Three bubble morphologies were found in the experiment:slug,dumbbell and grenade shapes.The viscosity effect of continuous phase aggravates the velocity difference between the fluid near the wall and the bubble,resulting in that the continuous phase near the bubble head flows towards and squeezes the bubble tail,which causes the deformation of bubbles.Moreover,the experimental results show that the deformation of bubbles could significa ntly prolo ng the bubble breakup period at the downstream Y-junction.There exists the critical capillary number Ca_(Cr )for the asymmetric breakup of grenade bubbles,Ca_(Cr )increases with the rise of flow rate and viscosity of the continuous phase.展开更多
The breakup reaction of ~9Li on a Pb target has been measured at 32.7 MeV/nucleon for the first time. Two peaks of ~6He+t coincident fragments at 9.8 and 12.5 MeV were observed and agreed with the results of the gener...The breakup reaction of ~9Li on a Pb target has been measured at 32.7 MeV/nucleon for the first time. Two peaks of ~6He+t coincident fragments at 9.8 and 12.5 MeV were observed and agreed with the results of the generator coordinate method calculation. The experiment was carried out thanks to a specially arranged detection system around zero degrees at the Heavy Ion Research Facility in Lanzhou, Radioactive Ion Beam Line in Lanzhou(HIRFL–RIBLL).展开更多
基金supports for this project from State Key Laboratory of Chemical Safety(SKLCS–2024001)are gratefully acknowledged。
文摘Bubble breakup at T-junction microchannels is the basis for the numbering-up of gas−liquid two-phase flow in parallelized microchannels. This article presents the bubble breakup in viscous liquids at a microfluidic T-junction. Nitrogen is used as the gas phase, and glycerol-water mixtures with different mass concentration of glycerol as the liquid phase. The evolution of the gas−liquid interface during bubble breakup at the microfluidic T-junction is explored. The thinning of the bubble neck includes the squeezing stage and the rapid pinch-off stage. In the squeezing stage, the power law relation is found between the minimum width of the bubble neck and the time, and the values of exponents α1 and α2 are influenced by the viscous force. The values of pre-factors m_(1) and m_(2) are negatively correlated with the capillary number. In the rapid pinch-off stage, the thinning of the bubble neck is predominated by the surface tension, and the minimum width of the bubble neck can be scaled with the remaining time as power-law. The propagation of the bubble tip can be characterized by the power law between the movement distance and the time, with decreasing exponent as increased liquid viscosity.
基金supported by the research award project RI/0220-10000618-001 to Sheth from the Industrial Research and Consultancy Centre(IRCC)IIT Bombay.Shekhar and Astha were supported by Prime Minister’s Research Fellowships(PMRF,File Nos.1303100 and 1303103,respectively)+4 种基金Naik was initially supported by an IIT Bombay Institute Post-Doctoral Fellowship(File No.HR-1(HRM-1)/Rect/33/2022/20003002)subsequently by a Goa State Research Foundation Post-doctoral Fellowship(File No.PDF2024003)We express our sincere gratitude to Prof.N.Prabhakar for kindly granting us access to the WD-XRF spectrometry facility(SIP ProjectWBS Code:IN/22-1111039E-01)the ICP-MS facility,and the SERB-funded EPMA National Facility(IRPHA Grant No.IR/S4/ESF-16/2009(G))in the Department of Earth Sciences,IIT Bombay.
文摘Large-scale Danian-age(post-K/Pg boundary)Deccan magmatism is well known from the Mumbai metropolitan area,located in the structurally complex Panvel flexure zone along the western Indian rifted continental margin.This compositionally diverse late-Deccan magmatic suite contains subaerial tholeiitic lavas and dykes typical of the main Deccan province,with many features atypical of the Deccan,such as spilitic pillow lavas,“intertrappean”sediments(often containing considerable volcanic ash),rhyolitic lavas and tuffs,gabbro-granophyre intrusions,and trachyte intrusions containing alkali basalt enclaves.Most of these units,previously dated at 62.5 Ma to 61 Ma,are contemporaneous with or slightly postdate the 62.5 Ma India-Seychelles continental breakup and Panvel flexure formation.In the Dongri-Uttan area,two samples of a>50-m-thick,columnar-jointed rhyolite from the Darkhan Quarry and from a section behind the current Uttan Sagari Police Station have previously been dated at 62.6±0.6 Ma and 62.9±0.2 Ma(^(40)Ar/^(39)Ar,2r errors).New exposures reveal that these two statistically indistinguishable 40 Ar/39 Ar ages correspond to two distinct rhyolite units,separated by well-bedded silicic ash.The columnar rhyolites are microcrystalline,composed of quartz and alkali feldspar,with rare small(1–2 mm),altered feldspar phenocrysts,and no recognisable relict vitroclasts.Given the westerly structural dip,most of their lateral extent is submerged under the Arabian Sea,and we consider them to be possible flood rhyolite lavas.We interpret the ash beds,composed of pumice clasts and glass shards,as a low-grade(nonwelded)vitric ash,derived from a possibly distal Plinian eruption and deposited by fallout.The lavas and ash are peraluminous rhyolites.The lavas are Sr-Ba-poor and Rb-Zr-Nb-rich,and show“seagull-shaped”rare earth element patterns with deep negative europium anomalies.These crystal-poor lavas are“hot-dry-reduced”rhyolites typical of intraplate,continental rift and rifted margin settings.The very different high-field strength element contents of the lavas and the ash indicate compositionally distinct magma batches.The 62.5 Ma Dongri-Uttan sequence provides clear evidence for rapid silicic eruptions of effusive and explosive nature,alternating with each other and sourced from distinct magma chambers and eruptive vents.A newly identified,highly feldspar-phyric trachyte intrusion marks the last phase of magmatic activity in the area,corresponding with late-stage trachyte-syenite intrusions exposed in coastal western India and the Seychelles,and shows that the Mumbai rhyolites and trachytes form a compositional continuum.
基金supported by the National Key R&D Program of China(Nos.2022YFA1602302 and 2023YFA1606402)the National Natural Science Foundation of China(Nos.U2167204,12175314,12235020 and 12275360)+2 种基金the Continuous-Support Basic Scientific Research Projectthe"111 Center"the China Scholarship Council(CSC)。
文摘A new detector array with a large solid angle coverage for the coincidence measurement of charged fragments was developed to study the breakup reaction mechanisms of weakly bound nuclear systems at energies around the Coulomb barrier.The array has been used to explore the breakup reaction mechanisms of^(6,7)Li+^(209)Bi systems at E_(beam)=30,40,47 MeV,showing good performance in particle identification and complete kinematic measurements.Based on this,different breakup modes and breakup components were clearly distinguished,and some new breakup modes were discovered,such as^(7)Li→α+t breakup mode in6Li+209Bi system and^(7)Li→^(6)He+p breakup mode in^(7)Li+^(209)Bi system.This array can also be used to explore other breakup reaction mechanisms induced by weakly bound nuclei.
基金National High-tech Research and Development Program of China (2008AA03A238)Fund for the Doctoral Program of Higher Education of China (20070699076)Foundation for the Author of National Excellent Doctoral Dissertation of China (2007B3)
文摘For the solutions of random variations of metal jet breakup and difficulties in controlling and predicting the process parameters （e.g. jet length） in micro droplet deposition manufacturing technique, experimental methods combining with theoretical analyses have been developed. The jet formation, jet length and their dominant factors （oxygen concentration and disturbance frequency, etc.） are discussed. The statistical law of jet length is found that the probability density function （PDF） of jet length is a log-normal distribution. The results show that the formation and size accuracy of metal jet breakup are improved by adjusting the gas pressure and optimizing the disturbance frequency. Under this circumstance, the jet length and morphological deviation can be minimized, which provides a stable droplet stream for the subsequent manufacturing process.
文摘This article studies numerically a familiar important phenomenon in spray combustion which is deformation and breakup of liquid drops in gas flow. The SIMPLER method is used to solve the two-dimensional （2D） unsteady axisymmetric Navier-Stokes equations for both the drop and the ambient gas flow. The level set method is applied to capturing the liquid/gas interface. Through calculation are obtained four typical breakup modes--oscillation, bag breakup, sheet stripping breakup and shear breakup governed by four non-dimensional numbers which are gas Weber number （Weg）, liquid Reynolds number （Rel）, gas Reynolds number （Reg） and density ratio （γ）. Their effects upon each mode are analyzed. The results indicate that among the four numbers, Weg is of the highest importance with Rel, Reg and γfollowing up. By widening the range of the density ratio up to 1 000, the breakup mode is discovered to be so complicated that a new one called multimode breakup mode turns up. This mode contains the shearing breakup and piercing breakup, which successively happen. The calculation results agree well with what is observed from the experiments.
基金financial supports from the National Key Research and Development Program of China(2016YFB0302801)National Natural Science Foundation of China(21676007)+1 种基金Fundamental Research Funds for the Central Universities(XK1802-1)Scientific Research and Technology Development Projects of China National Petroleum Corporation(2016B2605)。
文摘By releasing liquid drops in turbulent jet flows,we investigated the transformation of single drop breakup from binary to ternary and multiple.Silicone oil and deionized water were the dispersed phase and continuous phase,respectively.The probability of binary,ternary,and multiple breakup of oil drops in jet flows is a function of the jet Reynolds number.To address the underlying mechanisms of this transformation of drop breakup,we performed two-dimensional particle image velocimetry(PIV)experiments of single-phase jet flows.With the combination of drop breakup phenomenon and two-dimensional PIV results in a single-phase flow field,these transformation conditions can be estimated:the capillary number ranges from 0.17 to 0.27,and the Weber number ranges from 55 to 111.
文摘In the Mesoproterozoic time, the northern part of the Sino-Korean Plate experienced a period of intensive tectonic extension and breakup. 1. An abundance of sedimentary earthquake records is preserved in the Chuanlinggou, Tuanshanzi and Gaoyuzhuang formations in the Mesoproterozoic Changcheng System （1800-1400 Ma） and in the Mesoproterozoic Wumishan Formation of the Jixian System （1400-1000 Ma）. These earthquake records are characterized by various liquefied sand-veins, carbonate microspar and coarser spar veins, limestone dikes, liquefied breccia and various forms of liquefied contorted bedding. This deformation is always associated with synsedimentary faults and igneous activity. 2. Three liquefaction models for soft carbonate sediments are recognized, including liquefaction in laminated carbonate rocks, liquefaction in thin-bedded carbonates and large-scale liquefaction along huge carbonate dikes. 3. Based on the record of earthquake and volcanic activities, the Sino-Korean Plate experienced at least twice intraplate breakups. One occurred between 1800-1400 Ma, and the other occurred at about 1200 Ma. The last breakup resulted in formation of the Yan-Liao aulacogen, a tectonic zone characterized by deeper material vibrancy, active faults, major igneous activity and frequent earthquakes.
基金supported by Australian Research Council Australian Laureate Fellowship grant to ZXL (FL150100133)by China’s Thousand Talents Plan (2015)+2 种基金NSFC41674098 to NZsupported by resources provided by the High-performance Computing Platform of Peking Universitythe Pawsey Supercomputing Centre with funding from the Australian Government and the Government of Western Australia
文摘Understanding the dominant force responsible for supercontinent breakup is crucial for establishing Earth＇s geodynamic evolution that includes supercontinent cycles and plate tectonics. Conventionally,two forces have been considered： the push by mantle plumes from the sub-continental mantle which is called the active force for breakup, and the dragging force from oceanic subduction retreat which is called the passive force for breakup. However, the relative importance of these two forces is unclear. Here we model the supercontinent breakup coupled with global mantle convection in order to address this question. Our global model features a spherical harmonic degree-2 structure, which includes a major subduction girdle and two large upwelling（superplume） systems. Based on this global mantle structure,we examine the distribution of extensional stress applied to the supercontinent by both subsupercontinent mantle upwellings and subduction retreat at the supercontinent peripheral. Our results show that：（1） at the center half of the supercontinent, plume push stress is ～3 times larger than the stress induced by subduction retreat;（2） an average hot anomaly of no higher than 50 K beneath the supercontinent can produce a push force strong enough to cause the initialization of supercontinent breakup;（3） the extensional stress induced by subduction retreat concentrates on a ～600 km wide zone on the boundary of the supercontinent, but has far less impact to the interior of the supercontinent. We therefore conclude that although circum-supercontinent subduction retreat assists supercontinent breakup, sub-supercontinent mantle upwelling is the essential force.
基金The project supported by the National Natural Science Foundation of China
文摘Based on the linear analysis of stability, a dispersion equation is deduced which delineates the evolution of a general 3-dimensional disturbance on the free surface of an incompressible viscous liquid jet, With respect to the spatial growing disturbance mode, the numerical results obtained from the solution of the dispersion equation reveal that a dimensionless parameter J(e) exists. As J(e) > 1, the axisymmetric disturbance mode is most unstable; and when J(e) < 1, the asymmetric disturbances come into being, their growth rate increases with the decrease of J(e), till one of them becomes the most unstable disturbance. The breakup of a low-speed liquid jet results from the developing of axisymmetric disturbances, whose instability is produced by the surface tension; while the atomization of a high-speed Liquid jet is brought about by the evolution of nonaxisymmetric disturbance, whose instability is caused by the aerodynamic force on the interface between the jet and the ambient gas.
基金supported by the Chinese Key Developing Program for Basic Sciences(Grant No. 2010CB950400)the National Natural Science Foundation of China (Grant No. 40705023)
文摘The stratospheric polar vortex breakup （SPVB） is an important phenomenon closely related to the seasonal transition of stratospheric circulation. In this paper, 62-year NCEP/NCAR reanalysis data were employed to investigate the distinction between early and late SPVB. The results showed that the anomalous circulation signals extending from the stratosphere to the troposphere were reversed before and after early SPVB, while the stratospheric signals were consistent before and after the onset of late SPVB. Arctic Oscillation （AO） evolution during the life cycle of SPVB also demonstrated that the negative AO signal can propagate downward after early SPVB. Such downward AO signals could be identified in both geopotential height and temperature anomalies. After the AO signal reached the lower troposphere, it influenced the Aleutian Low and Siberian High in the troposphere, leading to a weak winter monsoon and large-scale warming at mid latitudes in Asia. Compared to early SPVB, downward propagation was not evident in late SPVB. The high-latitude tropospheric circulation in the Northern Hemisphere was affected by early SPVB, causing it to enter a summer circulation pattern earlier than in late SPVB years.
基金supported by National Natural Science Foundation of China(Grant No.51276011)Beijing Municipal Natural Science Foundation of China(Grant No.3132016)+1 种基金National Hi-tech Research and Development Program of China(863 Program,Grant No.2013AA065303)Opening Foundation of State Key Laboratory of Engines of China(Grant No.K2013-3)
文摘Supercavitation in the diesel nozzle increases the instability of droplets in part due to the two-phase mixture, while the effect of cavitation bubbles on the instability of drops is still unclear. In order to investigate the breakup of cavitation bubbles within the diesel droplet, a new mathematical model describing the disturbance growth rate of the diesel bubble instability is developed. The new mathematical model is applied to predict the effects of fluids viscosity on the stability of cavitation bubbles. The predicted values reveal that the comprehensive effect of fluids viscosity makes cavitation bubbles more stable. Compared with the viscosities of air and cavitation bubble, the diesel droplet＇s viscosity plays a dominant role on the stability of cavitation bubbles. Furthermore, based on the modified bubble breakup criterion, the effects of bubble growth speed, sound speed, droplet viscosity, droplet density, and bubble-droplet radius ratio on the breakup time and the breakup radius of cavitation bubbles are studied respectively. It is found that a bubble with large bubble-droplet radius ratio has the initial condition for breaking easily. For a given bubble-droplet radius ratio （0.2）, as the bubble growth speed increases （from 2 m/s to 60 m/s）, the bubble breakup time decreases（from 3.59 gs to 0.17 ps） rapidly. Both the greater diesel droplet viscosity and the greater diesel droplet density result in the increase of the breakup time. With increasing initial bubble-droplet radius ratio （from 0.2 to 0.8）, the bubble breakup radius decreases （from 8.86 trn to 6.23 tm）. There is a limited breakup radius for a bubble with a certain initial bubble-droplet radius ratio. The mathematical model and the modified bubble breakup criterion are helpful to improve the study on the breakup mechanism of the secondary diesel droplet under the condition of supercavitation.
基金This research was supported by the National Key Research and Development Project of China(2016YFB0601403).
文摘Molten slag is broken up by supersonic air into droplets through the air quenching dry slag granulation technique.The breakup process of blast furnace slag directly determines the droplet diameter and the waste heat recovery.In order to gain deep insight into the granulation mechanism and visualize the breakup process,three-dimensional unsteady numerical simulation based on the k-x based shear stress transport turbulence model was conducted to simulate the transient breakup process of molten slag(k is the turbulent kinetic energy,and x is the specific dissipation rate).The coupled level-set and volume-of-fluid method was utilized to capture the sharp air–liquid interface.The results show that a flat film is formed firstly under the effects of air impingement,recirculation zone and pressure gradients.Then,the axial wave and the spanwise wave appear simultaneously and the film is broken up into ligaments owing to the generation of vortex and hole structure at the intersection of axial trough and spanwise trough.Finally,the ligaments are broken up into droplets owing to Rayleigh–Taylor instability at the air–liquid interface.The droplets smaller than 3.00 mm account for 80%,with the average diameter of 1.95 mm.
基金supported by the National Natural Science Foundation of China(No.11572346)。
文摘Primary breakup in a liquid-liquid pintle injector element at different radial jet velocities is investigated to elucidate the impingement morphology,the formation of primary breakup spray half cone angle,the pressure distribution,the liquid diameter distribution,and the liquid velocity distribution.With a sufficient mesh resolution,the liquid morphology can be captured in a physically sound way.A mushroom tip is triggered by a larger radial jet velocity and breakup happens at the tip edge first.Different kinds of ligament breakup patterns due to aerodynamic force and surface tension are captured on the axial sheet.A high pressure core is spotted at the impinging point region.A larger radial jet velocity can feed more disturbances into the impinging point and the axial sheet,generate stronger vortices to promote the breakup process at a longer distance,and form a larger spray half cone angle.Because of the re-collision phenomenon the axial sheet diameter does not decrease monotonically.The inner rim on the axial sheet shows a larger diameter magnitude and a lower velocity magnitude due to surface tension.This paper is expected to provide a reference for the optimum design of a liquid-liquid pintle injector.
基金Aeronautical Science Foundation of China (99C5 10 91)
文摘An experimental study on the breakup of a conical liquid sheet from a pressure swirl atomizer was conducted by using a Particle Image Velocimetry (PIV) system. The variation of wavelength, wave speed and amplitude of wave versus liquid pressure was obtained. The results indicate that the cone half angle increases with liquid pressure. The stripped half wavelength liquid fragment seems to break into a series of drops immediately and no obvious contraction from liquid fragment to ligament is seen. The recorded images also show that both short and long wavelength waves exist simultaneously, and influence the breakup of the conical liquid sheet. The result of this study is useful for the purpose of developing and verifying the atomization model of spray produced by a pressure swirl atomizer.
基金supported by the National Natural Science Foundation of China (Nos. 40576027, 40238060)the High-Tech R&D Program of China (No. 2008AA09Z306)
文摘The Baiyun （白云） sag in the southern Pearl River Mouth basin is the largest and deepest sag in deepwater northern South China Sea. Researches and exploration in this sag have revealed many distinct features of the sag. This article reports its Idling history through backstripping of depth data of interpreted sequence boundaries. Maps of sediment rates of 10 sequences from 49 Ma to the present were constructed, showing the spatio-temporal variation of the sediment rate. Three stages of sediment infilling, 49-17.5 Ma, 17.5-10.5 Ma, and 10.5-0 Ma, were divided by abrupt changes of sedimentary patterns. If the breakup of the South China Sea took place at -30 Ma, significant post-breakup acceleration of sedimentation was observed at 17.5-15.5 Ma and 13.8-12.5 Ma, indicating acceleration of subsidence at these times. We propose that the onset of strong post-breakup subsidence at ～17.5 Ma was an important tectonic event that changed the pattern of sedimentation from discrete and medium-rate deposition centers in both main and south subsags to restricted but high-rate deposition in the main subsag. The cause and implications of this newly recognized event need to be investigated.
基金supported by the National Natural Science Foundation of China(Grant No.91955204)National Major Science and Technology Project of China(Grant No.2016ZX05004001)。
文摘Geodynamic drivers for the supercontinent cycle are generally attributed to either top-down(subduction-related)or bottom-up(mantle-related)processes.Compiled geochemical data and U-Pb ages and Hf isotopic signatures for magmatic and detrital zircons from the Tarim Craton reveal a distinct change in subduction style during the Neoproterozoic.The subduction cycle is recorded in increasing and decreasing intensity of subduction-related magmatic rocks and time-equivalent sedimentary successions,and converse trends ofεHf(t)values and corresponding changes in crustal incubation time.These trends are consistent with a switch from advancing to retreating subduction.The switch likely occurred at ca.760 Ma when zirconεHf(t)values increase and crustal incubation times decrease following a transitional shift between 800 Ma and 760 Ma.A switch at this time is consistent with Rodinia breakup and may have resulted in the late Neoproterozoic Tarim rift basin.The long-lived(ca.500 Ma)subduction recorded in the Tarim Craton suggests the predominance of a top-down process for Rodinia breakup on this part of its margin.
基金Supported by the National Natural Science Foundation of China (No.50536020 and No.10172069).
文摘The experimental results of the deformation and breakup of a single drop immersed in a Newtonian liq-uid and subjected to a constant shear rate which generated by counter rotating Couette apparatus were presented in this paper. From experimental observations, the breakup occurred by three mechanisms, namely, necking, end pinching, and capillary instability. Quantitative results for the deformation and breakup of drop are presented. The maximum diameter and Sauter mean diameter of daughter drops and capillary thread radius are linearly related to the inverse shear rate and independent of the initial drop size, the dimensionless wavelength which is the wave-length divided by the thread width at breakup is independent of the shear rate and initial drop size, and the deforma-tion of threads follows a pseudo-affine deformation for Cai/Cac larger than 2.
基金Supported by the National Natural Science Foundation of China(51276011)the National High Technology Research and Development Program of China(2013AA065303)+1 种基金Beijing Municipal Natural Science Foundation of China(3132016)the Opening Foundation of State Key Laboratory of Engines(K2013-3)
文摘A modified mathematical model is used to study the effects of various forces on the stability of cavitation bubbles within a diesel droplet. The principal finding of the work is that viscous forces of fluids stabilize the cavitation bubble, while inertial force destabilizes the cavitation bubble. The droplet viscosity plays a dominant role on the stability of cavitation bubbles compared with that of air and bubble. Bubble–droplet radius ratio is a key factor to control the bubble stability, especially in the high radius ratio range. Internal hydrodynamic and surface tension forces are found to stabilize the cavitation bubble, while bubble stability has little relationship with the external hydrodynamic force. Inertia makes bubble breakup easily, however, the breakup time is only slightly changed when bubble growth speed reaches a certain value(50 m·s-1). In contrast, viscous force makes bubble hard to break. With the increasing initial bubble–droplet radius ratio, the bubble growth rate increases, the bubble breakup radius decreases, and the bubble breakup time becomes shorter.
基金supported by the National Natural Science Foundation of China(21978197)the aid of Opening Project of State Key Laboratory of Chemical Engineering of China(SKLCh E-21Z03)。
文摘The deformation of moving slug bubbles and its influence on the bubble breakup dynamics in microchannel were studied.Three bubble morphologies were found in the experiment:slug,dumbbell and grenade shapes.The viscosity effect of continuous phase aggravates the velocity difference between the fluid near the wall and the bubble,resulting in that the continuous phase near the bubble head flows towards and squeezes the bubble tail,which causes the deformation of bubbles.Moreover,the experimental results show that the deformation of bubbles could significa ntly prolo ng the bubble breakup period at the downstream Y-junction.There exists the critical capillary number Ca_(Cr )for the asymmetric breakup of grenade bubbles,Ca_(Cr )increases with the rise of flow rate and viscosity of the continuous phase.
基金supported by the National Natural Science Foundation of China(Nos.U1432247 and 11575256)the National Basic Research Program of China(973 Program)(Nos.2014CB845405 and2013CB83440x)
文摘The breakup reaction of ~9Li on a Pb target has been measured at 32.7 MeV/nucleon for the first time. Two peaks of ~6He+t coincident fragments at 9.8 and 12.5 MeV were observed and agreed with the results of the generator coordinate method calculation. The experiment was carried out thanks to a specially arranged detection system around zero degrees at the Heavy Ion Research Facility in Lanzhou, Radioactive Ion Beam Line in Lanzhou(HIRFL–RIBLL).
