As the performance of the box-type multiple launch rocket system(BMLRS)improves,its mechanical structures,particularly the plane clearance design between the slider on the rocket and the guide inside the launch canist...As the performance of the box-type multiple launch rocket system(BMLRS)improves,its mechanical structures,particularly the plane clearance design between the slider on the rocket and the guide inside the launch canister,have grown increasingly complex.However,deficiencies still exist in the current launch modeling theory for BMLRS.In this study,a multi-rigid-flexible-body launch dynamics model coupling the launch platform and rocket was established using the multibody system transfer matrix method and the Newton-Euler formulation.Furthermore,considering the bending of the launch canister,a detection algorithm for slider-guide plane clearance contact was proposed.To quantify the contact force and friction effect between the slider and guide,the contact force model and modified Coulomb model were introduced.Both the modal and launch tests were conducted.Additionally,the modal convergence was verified.By comparing the modal experiments and simulation results,the maximum relative error of the eigenfrequency is 3.29%.thereby verifying the accuracy of the developed BMLRS dynamics model.Furthermore,the launch test validated the proposed plane clearance contact model.Moreover,the study investigated the influence of various model parameters on the dynamic characteristics of BMLRS,including launch canister bending stiffness,slider and guide material,slider-guide clearance,slider length and layout.This analysis of influencing factors provides a foundation for future optimization in BMLRS design.展开更多
In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cu...In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cured tobacco, the loading density at 59.52 kg/m2 （4 000 kg/barn） was the best, fol owed by 66.96 kg/m2 （4 500 kg/barn） and 74.40 kg/m2 （5 000 kg/barn）. As leaf loading density increased, the contents of leaf nicotine and total nitrogen increased, sugar content had smal changes, the ratio of sugar to nicotine decreased and tended to be balanced and the content of neutral aroma substances was decreasing, but the difference among treatments was not significant. With the increase of loading density, the sensory quality of cured leaf was better. When leaf loading density was 66.96 kg/m2 （4 500 kg/barn）, apperance quality of cured leaf improved considerably, with prominent aro-ma. Therefore, the best loading density of tobacco leaf in cage clamp of bulk-curing barn would be 66.96 kg/m2 （4 500 kg/barn） .展开更多
CuItivars K326, Yunyan 87 and Guiyan 4 were used to investigate the curing characteristics and suitabIe harvest maturity of fresh fIue-cured tobacco Ieaves in Ankang tobacco growing areas. ResuIts indicated that the w...CuItivars K326, Yunyan 87 and Guiyan 4 were used to investigate the curing characteristics and suitabIe harvest maturity of fresh fIue-cured tobacco Ieaves in Ankang tobacco growing areas. ResuIts indicated that the water Ioss of K326 was sIow,and the Ieaves were resistant to curing and reIative easiIy to cure. The water Ioss of Yunyan 87 and Guiyan 4 were quick, and the Ieaves with normal resistance to curing were reIative difficuIt to cure. For Guiyan 4, the shrinkage of CM1 maturity was the Iargest. For K326 and Yunyan 87, the shrinkages of CM2 maturity were the Iargest whiIe the shrinkage of CM1 maturity was the Iowest, but the difference did not reach statistical significance. The proportion of top-middIe-grade tobacco Ieaves and average price for K326 were the highest with XM2, CM2 and BM2 maturity, and for Yunyan 87 were XM1, CM3 and BM2 maturity. For K326, Ieaves with XM2, CM2 and BM2 maturity showed the balanced chemical components and the best smoking quality.展开更多
[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of ...[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of yellow sun-cured tobacco. [method] The tobaccos were divided into two groups treated with two methods and the related indices of treated tobaccos were then measured to evaluate effects of curing methods on quality of yellow sun-cured tobacco. [Result] Tobaccos treated with two methods were all dominated by reddish yellow and yellow; exterior quality differed little. In detail, total sugar and reducing sugar in an average level in three locations were all higher with method A than those with method B, but nicotine and total N were lower; comprehensive chemical components in group with method B proved more appropriate with higher K. In addition, sensory qualities of leaves in moderate and bottom locations were better with method B compared with method A; sensory quality of top leaves was better; comprehensive sensory quality of leaves treated with method B proved better. On the other hand, cost for method A was 2.82 times of method B; the area of sun-curing field was 3.27 times and manage- ment work was 1.77 times, which indicated that method B is low-cost and time-saving, which would be a guarantee of tobacco quality. [Conclusion] The research provides scientific references for rational use of tobacco resources and optimization of sun-curing technology.展开更多
[Objective] This study was conducted to compare the aroma quality of up-per leaves of K326 flue-cured in different barns, and provide theoretical references for the development and optimization of bulk curing barn and...[Objective] This study was conducted to compare the aroma quality of up-per leaves of K326 flue-cured in different barns, and provide theoretical references for the development and optimization of bulk curing barn and the supporting tech-niques. [Method] The upper leaves of K326 were flue-cured in a commonness barn, a four-shelf bulk curing barn and a three-shelf bulk curing barn separately, and then the contents of aroma components and taste quality indices of the finished leaves were measured and compared. [Result] The contents of total aroma components, chromoplast pigment degradation products, phenylalanine aroma components and neophytadiene showed no significant differences in the leaves flue-cured in four-shelf bulk curing barn and commonness barn, but were significantly or very significantly higher than those in the leaves flue-cured in three-shelf bulk curing barn. The con-tents of carotenoid degradation products, Mail ard reaction products, cembranes aro-ma components and total aroma components （except neophytadiene） showed no significant difference among the three treatments. The results of sensory evaluation revealed that the sensory taste of the leaves flue-cured in four-shelf bulk curing barn was the best, as the finished leaves had rich, delicate aroma, comfortable and clean aftertaste. The leaves flue-cured in commonness barn was better than those flue-cured in three-shelf bulk curing barn in aroma quality, amount and aftertaste. [Conclusion] The four-shelf bulk curing barn had a large volume for tobacco leaf processing, but a similar baking environment to the commonness barn, which is conducive to the formation and accumulation of aroma components, so the finished leaves had similar appearance and quality with those flue-cured in commonness barn. The upper flue-cured leaves in three-shelf bulk curing bran had poorer quality than those flue-cured in the other two barns.展开更多
A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly...A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly（ethylene glycol）.The influences of the n-alkylene inserted in aminophenyl of flexible amino-terminated polythers（ATPE） on the mechanical properties,fractographs and curing kinetics of the ATPE-DGEBA cured products were studied.The results show that the insertion of n-alkylene group into the aminophenyl group of the ATPE,on one hand,can significantly increase the strain relaxation rate and decrease glass transition temperature of the ATPE-DGEBA cured products,resulting in slight decrease of the Young’s modulus and tensile strength,and significant increase of the toughness and elongation of the ATPE-DGEBA cured products.On the other hand,it can remarkably enhance the reactivity of amine with epoxy,much accelerating the curing rate of the ATPE-DGEBA systems.The activation energy of DGEBA cured by BAPTPE,BAMPTPE and BAEPTPE was 53.1,28.5 and 25.4 kJ·mol;,respectively.The as-obtained ATPE-DGEBA cured products are homogeneous, transparent,and show excellent mechanical properties including tensile strength and toughness.Thus they are promising to have important applications in structure adhesives,casting bulk materials,functional coatings,cryogenic engineering, damping and sound absorbing materials.展开更多
The cure kinetics of diglycidyl ether of bisphenol A （DGEBA） with hyperbranched poly （3-hydroxyphenyl） phosphate（HHPP） as the curing agent was investigated by means of non-isothermal differential scanning calori...The cure kinetics of diglycidyl ether of bisphenol A （DGEBA） with hyperbranched poly （3-hydroxyphenyl） phosphate（HHPP） as the curing agent was investigated by means of non-isothermal differential scanning calorimetry （DSC） at various heating rates. The results were compared with the corresponding results by using 1,3-dihydroxybenzene（DHB） as a model compound. The results show that HHPP can enhance the cure reaction of DGEBA, resulting in the decrease of the peak temperature of the curing curve as well as the decrease of the activation energy because of the flexible --P--O-- groups in the backbone of HHPP. However, both the activation energy of the cured polymer and the peak temperature of the curing curve are increased with DHB as a curing agent. The cure kinetics of the DGEBA/HHPP system was calculated by using the isoconversional method given by Malek. It was found that the two-parameter autocatalytic model（Sestak-Berggren equation） is the most adequate one to describe the cure kinetics of the studied System at various heating rates. The obtained non-isothermal DSC curves from the experimental data show the results being accordant with those theoretically calculated.展开更多
The mechanism of carotenoid degradation and the changes in the activities of related enzymes in flue-cured tobacco at the leaf-drying stage during the bulk-curing process were studied in order to provide theoretical b...The mechanism of carotenoid degradation and the changes in the activities of related enzymes in flue-cured tobacco at the leaf-drying stage during the bulk-curing process were studied in order to provide theoretical basis for optimization of curing technology. The effect of different rising speeds of temperature on the carotenoid degradation and the related enzymes activities at the color-fixing stage during the bulk curing process was studied by using the electric-heated fluecuring barn designed by Henan Agricultural University, China, based on curing technology with yellowing at low temperature and moderate humidity and leaf drying at moderate humidity. The results showed that the carotenoid degradation components （β-carotene, lutein, neoxanthin, and violaxthin） decreased gradually at the color-fixing stage during the bulk curing process. The carotenoid degradation components viz.,β-carotene, lutein, neoxanthin, and violaxthin at the slow heating curing （T1） were relatively higher than the rapid heating curing （T2） accounting for 10, 2, 32 and 32% respectively, but there were no differences among treatments （P〉 0.05）. The effect of different conditions of curing on the activities of enzymes related to carotenoids degradation were significant. The lipoxygenase, phenylalanine ammonialyase, peroxidase, and polyphenol oxidase enzymes had a bidirectional effect on the quality of tobacco leaves and it was beneficial to form more premise matter of aroma based on the higher enzyme activities at the early leaf-drying stage. The slow heating could regulate the change in various enzymes＇ activities reasonably, making cell redox reaction to reach the dynamic balance and make the degradation of carotenoids adequately. Meanwhile, it could avoid the occurrence of browning reaction and provide foundation for improving the quality of tobacco and optimization of technology for bulk curing and further enhancing aroma.展开更多
Steam-cured condition is found to cause larger porosity and worse properties of concrete compared with normal curing condition. For the sake of seeking effective measurements to eliminate this bad effect of steam-cure...Steam-cured condition is found to cause larger porosity and worse properties of concrete compared with normal curing condition. For the sake of seeking effective measurements to eliminate this bad effect of steam-cured condition on concrete, the water sorptivity and pore structure of steam-cured concretes exposed to different subsequent curing conditions were investigated after steam-curing treatment. The capillary absorption coefficient and porosity of the corresponding concretes were analyzed, and their mechanisms were also discussed. The results indicate that water sorptivity and pore structure of steam-cured concrete are greatly influenced by the curing condition used in subsequent ages. Exposure steam-cured concrete to air condition has an obviously bad effect on its properties and microstructures. Adopting subsequent curing of immersing steam-cured concrete into about 20℃ water after steam curing period can significantly decrease its capillary absorption coefficient and porosity. Steam-cured concrete with 7 d water curing has minimum capillary absorption coefficient and total porosity. Its water sorptivity is decreased by 23% compared with standard curing concrete and the porosity is 9.6% lower. Moreover, the corresponding gradient of water sorptivity and porosity of steam-cured concrete both decrease, thus mictostructure of concrete becomes more homogeneous.展开更多
[ Objective] This study aimed to investigate the curing performance of polyurethane curing barn and reduce the cost of tobacco leaf flue-curing. [ Meth- odl The temperature control effect, curing effect and curing cos...[ Objective] This study aimed to investigate the curing performance of polyurethane curing barn and reduce the cost of tobacco leaf flue-curing. [ Meth- odl The temperature control effect, curing effect and curing cost of polyurethane curing barn and traditional bulk curing barn were analyzed and compared. [ Re- suit] The results showed that there were no significant differences in curing performance between two types of curing barns. Horizontal temperature differences in- creased slightly as the temperature rose. Specifically, horizontal temperature differences between each layer ranged from 0.2 ~C to 0.5 ~. Both two types of curing barns exhibited uniform air distribution. Polyurethane curing barn exhibited stable vertical temperature differences. Both two types of curing barns presented good curing effects with slight differences. Polyurethane curing barn exhibited higher economic benefits, lower coal cost, lower electricity cost, lower labor cost and lon- ger service life than traditional bulk curing barn, but its construction cost was higher. [ Conclusion] Polyurethane curing barn exhibits better curing performance with ~ood application prospects.展开更多
In order to improve the thermal stability of condensed polynuclear aromatic(COPNA) resin synthesized from vacuum residue, 1,4-benzenedimethanol was added to cure COPNA resin. The curing mechanism was investigated by p...In order to improve the thermal stability of condensed polynuclear aromatic(COPNA) resin synthesized from vacuum residue, 1,4-benzenedimethanol was added to cure COPNA resin. The curing mechanism was investigated by proton nuclear magnetic resonance spectrometry, solid carbon-13 nuclear magnetic resonance spectrometry and Fourier transform infrared spectroscopy. Microstructures of the uncured and the cured COPNA resins were studied by scanning electron microscopy and X-ray diffractometry. The thermal stability of COPNA resins before and after curing was tested by thermogravimetric analysis. The element composition of the cured COPNA resin heated at different temperatures was analyzed by an element analyzer. The results showed that the uncured COPNA resin reacted with the cross-linking agent during the curing process, and the curing mechanism was confirmed to be the electrophilic substitution reaction. Compared with the uncured COPNA resin, the cured COPNA resin had a smooth surface, well-ordered and streamlined sheet structure with more crystalline solids, better molecular arrangement and orientation. The weight loss process of the uncured and cured COPNA resins was divided into three stages. Carbon residue of the cured COPNA resin was 41.65% at 600 ℃, which was much higher than 25.02% of the uncured COPNA resin, which indicated that the cured COPNA resin had higher thermal stability.展开更多
A kind of aziridine crosslinkers was synthesized and used to crosslink acrylate copolymers. The crosslinking properties and curing kinetics of the resin were studied. It was found that with the increase of the content...A kind of aziridine crosslinkers was synthesized and used to crosslink acrylate copolymers. The crosslinking properties and curing kinetics of the resin were studied. It was found that with the increase of the content of crosslinker in the emulsion, the mechanical properties and solvent resistance of the resin will be apparently improved, but its glass transition temperature (T.) is very low. The lowest amount of crosslinker used in the acrylic resin emulsion is 0.25%. Curing kinetics studied by DSC show that this curing reaction occurs readily because the apparent activation energy of the reaction is low (65.1 kJ/mol). These results demonstrate that the aziridine crosslinker is indeed a low temperature crosslinking agent and can be used at room temperature.展开更多
[Objective] This study aimed to compare the effects of Chinese quality-improving fragrunce-increasing tobacco flue-curing technology, Chinese three- stage tobaeeo flue-curing technology and Zimbabwean tobaceo flue-eur...[Objective] This study aimed to compare the effects of Chinese quality-improving fragrunce-increasing tobacco flue-curing technology, Chinese three- stage tobaeeo flue-curing technology and Zimbabwean tobaceo flue-euring technology on microscopie structure of flue-cured tobacco leaves to provide theoretical basis for tobacco flue-curing. [ Method ] Middle leaves of tobacco cultivar K326 were collected in Pengshui County of Chongqing City for flue-curing experiment using three flue-curing technologies. Leaf samples were collected regularly in the flue-curing process, to investigate the microscopic structure of flue-cured tobaceo leaves. [ Result] During three flue-curing processes, leaves, palisade tissues and sponge tissues shrank gradually. Three flue-euring processes exhibited significant differ- ences in the peak of tissue shrinkage ： microscopic structure of flue-cured tobacco leaves in Chinese three-stage tobacco flue-curing process shrank earliest, follower by Chinese quality-improving fragrance-increasing tobacco flue-curing process; flue-eured tobacco leaves in Zimbabwean tobacco flue-curing process presented the latest shrinkage. At 84 h post-curing, leaf thickness in three flue-curing processes showed a descend order of Chinese three-stage tobacco flue-curing process 〉 Chinese quality-improving fragrance-increasing tobacco flue-curing process 〉 Zimbabwean tobacco flue-curing process. Upper and lower epidermal cells in Zimb- abwean tobacco flue-curing process ruptured earlier than other two flue-curing processes; eventually, the majority of cells ruptured and mixed with palisade tissues and sponge tissues. In Chinese quality-improving fragranee-increasing tobacco flue-curing process, only a small number of epidermal cells in dried leaves ruptured. Among three flue-curing technologies, Zimbabwean tobacco flue-curing technology exhibited the greatest damage to epidermal cells, followed by Chinese three-stage tobaceo flue-curing technology; Chinese quality-improving fragrance-increasing tobacco flue-curing technology had the minimum damage to epidermal cells. Mese- phyll cross-section exhibited significant morphological changes in stomata. To be specific, at 0 - 12 h post-curing, stomata of tobacco leaves closed with slightly prominent stamatal apparatuses on upper and lower epidermis; at 24 -72 h post-curing, stomata of tobaceo leaves changed gradually from opening to closure with significantly prominent stomatal apparatuses on upper and lower epidermis; at 84 h post-curing, stomata of tobacco leaves closed, and the majority of stomatal appa- ratuses were significantly prominent. In Chinese quality-improving fragrance-increasing tobacco flue-curing process, only a small number of epidermal ceils ruptured at 84 h pest-flue-curing; palisade tissues and sponge tissues shrank almost simultaneously. Significant gaps were observed between palisade tissues and between pal- isade tissues and sponge tissues. Chinese quality-improving fragrance-increasing tobacco flue-curing technology exhibited lower disorder level compared with other two flue-curing technologies. [ Conclusion] Chinese quality-improving fragrance-increasing tobacco flue-curlng technology was conducive to maintaining the micro- scopic structure integrity of flue-cured tobacco leaves and obtaining high-quality flue-cured tobacco leaves.展开更多
[ Objective] This study aimed to compare the effects of low-temperature low-humidity tobacco flue-curing technology, moderate-temperature moderate- humidity tobacco flue-curing technology and moderate-temperature high...[ Objective] This study aimed to compare the effects of low-temperature low-humidity tobacco flue-curing technology, moderate-temperature moderate- humidity tobacco flue-curing technology and moderate-temperature high-humidity tobacco flue-curing technology on submicroscopic structure of flue-cured tobacco leaves to provide theoretical basis for tobacco flue-curing. [ Method] Middle leaves of tobacco cuhivar K326 were collected in Pengshui County of Chongqing City for flue-curing experiment using three flue-curing technologies. Leaf samples were collected regularly in the flue-curing process, to investigate the submicroscopic structure of flue-cured tobacco leaves. [ Result] Morphology changes and structural rupture of chloroplasts occurred at different time during three flue-curing proces- ses. In low-temperature low-humidity flue-curing process, morphology changes and structural rupture of chloroplasts occurred late but rapidly; in moderate-tempera- ture moderate-humidity flue-curing process and moderate-temperature high-humidity flue-curing process, morphology changes and structural rupture of chloroplasts occurred early but slowly. Among these three flue-curing processes, the speed of changes in mitochondria morphology, cristae number and membrane rupture pres- ented an upward order of low-temperature low-humidity flue-curing process 〈 moderate-temperature high-humidity flue-curlng process 〈 moderate-temperature moderate-humidity flue-curing process. In low-temperature low-humldity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 36 -48 h ; in moderate-temperature moderate-humidity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 24 - 36 h; in moderate-temperature high-humidity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 12 - 24 h. [ Conclusion ] Using low-temperature low-humidity flue- curing technology could prolong the maintenance duration of the submicroscopic structure integrity of flue-cured tobacco leaves, which was conducive to fully decom- posing and transforming substances in tobacco leaves and obtaining high-quality flue-cured tobacco leaves.展开更多
The application of very large floating structure (VLFS) to the utilization of ocean space and exploitation of ocean resources has become one of the issues of great interest in international ocean engineering field. Ow...The application of very large floating structure (VLFS) to the utilization of ocean space and exploitation of ocean resources has become one of the issues of great interest in international ocean engineering field. Owing to the advantage of simplicity in structure and low cost of construction and maintenance, box-type VLFS can be used in the calm water area near the coast as the structure configuration of floating airport. In this paper, a 3D linear hydroelastic theory is used to study the dynamic response of box-type VLFS in sinusoidal regular waves. A beam model and a 3D FEM model are respectively employed to describe the dynamic characteristics of the box-type Structure in vacuum. A hydrodynamic model (3D potential theory of flexible body) is applied to investigate the effect of different dry models on the hydroelastic response of box-type structure. Based on the calculation of hydroelastic response in regular waves, the rigid body motion displacement, flexible deflection, and the short term and long term wave induced bending moments are also predicted.展开更多
[Objectives]To explore the growth characteristics,nitrogen metabolism and curing characteristics of the new variety NC71 in strongly aromatic tobacco leaves production area.[Methods]With Yunyan 87 as the control and N...[Objectives]To explore the growth characteristics,nitrogen metabolism and curing characteristics of the new variety NC71 in strongly aromatic tobacco leaves production area.[Methods]With Yunyan 87 as the control and NC71 as the experimental material,the experiment was carried out in Nanyang tobacco area for two consecutive years to study the growth characteristics of tobacco plants,the activity of key enzymes in nitrogen metabolism,the content of secondary metabolites,and the differences of tobacco-related water content,PPO enzyme activity and total phenol content.[Results]NC71 plants had lower height,better appearance quality and lower nicotine,total sugar and chlorine content.NC71 high nitrogen treatment and Yunyan 87 medium nitrogen treatment had similar key enzyme activity of nitrogen metabolism,content of secondary metabolites;Yunyan 87 and NC71 were easy to cure and resistant to curing.[Conclusions]This study provides a reference for measuring the appropriate nitrogen application rate and optimizing the curing process from the activities of the key enzymes NR and GS in nitrogen metabolism at the mature stage of the variety.展开更多
A box-type solar cooker with an inclined surface, equipped with a concentration reflector to allow maximum energy to be collected, enabled cooking tests to be carried out in the rainy season. Different thermocouples w...A box-type solar cooker with an inclined surface, equipped with a concentration reflector to allow maximum energy to be collected, enabled cooking tests to be carried out in the rainy season. Different thermocouples were implanted on various places of the cooker. The temperature measurements from these sensors were taken every 10 minutes.<span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">The tests presented in this article relate to the preparation of eggs and rice. The absorber temperatures during the tests exceeded 100<span style="white-space:nowrap;">°</span>C. The cooking times were between 1</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">h</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">50</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">min and 2</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">h</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">20 min despite the numerous cloudy periods. The cooker made it possible to reach sufficient temperatures for healthy cooking of food. The results obtained for these first tests are satisfactory and very encouraging.</span></span></span>展开更多
To overcome reliance on molds and the difficulty of fabricating complex geometries with traditional C/C composites,direct ink writing(DIW)with UV/heat dual curing was employed to produce high-performance C/C composite...To overcome reliance on molds and the difficulty of fabricating complex geometries with traditional C/C composites,direct ink writing(DIW)with UV/heat dual curing was employed to produce high-performance C/C composites.The rheological properties of the composite inks were systematically analyzed to assess the effects of phenolic resin(PR)and carbon fiber(CF)content.Results show pronounced shear-thinning behavior and strong thixotropy-both essential for stable DIW.Additionally,UV/heat curing behavior was characterized to provide theoretical insights for optimizing curing parameters.Notably,CF addition is found to significantly attenuate UV light penetration compared to pure PR.As CF content increases,the critical UV irradiation energy rises sharply from 68.47 to 911.19 mJ/cm^(2),necessitating precise adjustments to curing parameters.Preforms were pyrolyzed in a carbon tube furnace to examine pore-formation characteristics,and chemical vapor infiltration(CVI)was applied to filling the resulting pores,yielding C/C composites with a flexural strength of 115.19 MPa.展开更多
Chronic hepatitis B(CHB)remains a significant global health challenge,affecting more than 250 million individuals worldwide.A functional cure,defined as the loss of hepatitis B surface antigen(HBsAg)and suppression of...Chronic hepatitis B(CHB)remains a significant global health challenge,affecting more than 250 million individuals worldwide.A functional cure,defined as the loss of hepatitis B surface antigen(HBsAg)and suppression of hepatitis B virus(HBV)DNA to undetectable levels,represents the optimal therapeutic endpoint for managing CHB.However,the complex pathogenesis of CHB,which includes HBV DNA integration,persistence of covalently closed circular DNA,and impaired immune responses,presents substantial barriers to HBsAg clearance.Current therapies offer limited success in achieving a functional cure,with HBsAg seroclearance occurring in only 3%-5%of patients after 10 years of nucleos(t)ide analogs(NAs)therapy and 8%-14%within 3-5 years of pegylated interferon treatment.To overcome these limitations,novel direct-acting antivirals targeting different stages of the HBV life cycle are being investigated.Additionally,immunomodulatory approaches,including therapeutic vaccines and immune checkpoint inhibitors,are being explored to enhance HBV-specific immune responses.The concept of NAs cessation in carefully selected non-cirrhotic patients may accelerate HBsAg loss,although the risks of hepatic flare and hepatocellular carcinoma necessitate rigorous monitoring.This review provides a comprehensive overview of the current understanding of HBsAg seroclearance in CHB,discussing its clinical significance,therapeutic challenges,and evolving treatment landscape in the pursuit of a functional cure.展开更多
基金supported by National Natural Science Foundation of China(Grant No.92266201).
文摘As the performance of the box-type multiple launch rocket system(BMLRS)improves,its mechanical structures,particularly the plane clearance design between the slider on the rocket and the guide inside the launch canister,have grown increasingly complex.However,deficiencies still exist in the current launch modeling theory for BMLRS.In this study,a multi-rigid-flexible-body launch dynamics model coupling the launch platform and rocket was established using the multibody system transfer matrix method and the Newton-Euler formulation.Furthermore,considering the bending of the launch canister,a detection algorithm for slider-guide plane clearance contact was proposed.To quantify the contact force and friction effect between the slider and guide,the contact force model and modified Coulomb model were introduced.Both the modal and launch tests were conducted.Additionally,the modal convergence was verified.By comparing the modal experiments and simulation results,the maximum relative error of the eigenfrequency is 3.29%.thereby verifying the accuracy of the developed BMLRS dynamics model.Furthermore,the launch test validated the proposed plane clearance contact model.Moreover,the study investigated the influence of various model parameters on the dynamic characteristics of BMLRS,including launch canister bending stiffness,slider and guide material,slider-guide clearance,slider length and layout.This analysis of influencing factors provides a foundation for future optimization in BMLRS design.
文摘In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cured tobacco, the loading density at 59.52 kg/m2 （4 000 kg/barn） was the best, fol owed by 66.96 kg/m2 （4 500 kg/barn） and 74.40 kg/m2 （5 000 kg/barn）. As leaf loading density increased, the contents of leaf nicotine and total nitrogen increased, sugar content had smal changes, the ratio of sugar to nicotine decreased and tended to be balanced and the content of neutral aroma substances was decreasing, but the difference among treatments was not significant. With the increase of loading density, the sensory quality of cured leaf was better. When leaf loading density was 66.96 kg/m2 （4 500 kg/barn）, apperance quality of cured leaf improved considerably, with prominent aro-ma. Therefore, the best loading density of tobacco leaf in cage clamp of bulk-curing barn would be 66.96 kg/m2 （4 500 kg/barn） .
基金Supported by Shanghai Tobacco(Group)Corporation(2011-00600)~~
文摘CuItivars K326, Yunyan 87 and Guiyan 4 were used to investigate the curing characteristics and suitabIe harvest maturity of fresh fIue-cured tobacco Ieaves in Ankang tobacco growing areas. ResuIts indicated that the water Ioss of K326 was sIow,and the Ieaves were resistant to curing and reIative easiIy to cure. The water Ioss of Yunyan 87 and Guiyan 4 were quick, and the Ieaves with normal resistance to curing were reIative difficuIt to cure. For Guiyan 4, the shrinkage of CM1 maturity was the Iargest. For K326 and Yunyan 87, the shrinkages of CM2 maturity were the Iargest whiIe the shrinkage of CM1 maturity was the Iowest, but the difference did not reach statistical significance. The proportion of top-middIe-grade tobacco Ieaves and average price for K326 were the highest with XM2, CM2 and BM2 maturity, and for Yunyan 87 were XM1, CM3 and BM2 maturity. For K326, Ieaves with XM2, CM2 and BM2 maturity showed the balanced chemical components and the best smoking quality.
基金Supported by China Tobacco Yunnan Indutrial Co.Ltd Scientific Program(2010YL02)~~
文摘[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of yellow sun-cured tobacco. [method] The tobaccos were divided into two groups treated with two methods and the related indices of treated tobaccos were then measured to evaluate effects of curing methods on quality of yellow sun-cured tobacco. [Result] Tobaccos treated with two methods were all dominated by reddish yellow and yellow; exterior quality differed little. In detail, total sugar and reducing sugar in an average level in three locations were all higher with method A than those with method B, but nicotine and total N were lower; comprehensive chemical components in group with method B proved more appropriate with higher K. In addition, sensory qualities of leaves in moderate and bottom locations were better with method B compared with method A; sensory quality of top leaves was better; comprehensive sensory quality of leaves treated with method B proved better. On the other hand, cost for method A was 2.82 times of method B; the area of sun-curing field was 3.27 times and manage- ment work was 1.77 times, which indicated that method B is low-cost and time-saving, which would be a guarantee of tobacco quality. [Conclusion] The research provides scientific references for rational use of tobacco resources and optimization of sun-curing technology.
文摘[Objective] This study was conducted to compare the aroma quality of up-per leaves of K326 flue-cured in different barns, and provide theoretical references for the development and optimization of bulk curing barn and the supporting tech-niques. [Method] The upper leaves of K326 were flue-cured in a commonness barn, a four-shelf bulk curing barn and a three-shelf bulk curing barn separately, and then the contents of aroma components and taste quality indices of the finished leaves were measured and compared. [Result] The contents of total aroma components, chromoplast pigment degradation products, phenylalanine aroma components and neophytadiene showed no significant differences in the leaves flue-cured in four-shelf bulk curing barn and commonness barn, but were significantly or very significantly higher than those in the leaves flue-cured in three-shelf bulk curing barn. The con-tents of carotenoid degradation products, Mail ard reaction products, cembranes aro-ma components and total aroma components （except neophytadiene） showed no significant difference among the three treatments. The results of sensory evaluation revealed that the sensory taste of the leaves flue-cured in four-shelf bulk curing barn was the best, as the finished leaves had rich, delicate aroma, comfortable and clean aftertaste. The leaves flue-cured in commonness barn was better than those flue-cured in three-shelf bulk curing barn in aroma quality, amount and aftertaste. [Conclusion] The four-shelf bulk curing barn had a large volume for tobacco leaf processing, but a similar baking environment to the commonness barn, which is conducive to the formation and accumulation of aroma components, so the finished leaves had similar appearance and quality with those flue-cured in commonness barn. The upper flue-cured leaves in three-shelf bulk curing bran had poorer quality than those flue-cured in the other two barns.
基金supported by the National 863 Plan(No.2006AA03A209)New Century Excellent Talent Plan (No.NECT-05-0660) from Ministry of EducationDefense Basic Research Item(No.D1420061057)
文摘A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly（ethylene glycol）.The influences of the n-alkylene inserted in aminophenyl of flexible amino-terminated polythers（ATPE） on the mechanical properties,fractographs and curing kinetics of the ATPE-DGEBA cured products were studied.The results show that the insertion of n-alkylene group into the aminophenyl group of the ATPE,on one hand,can significantly increase the strain relaxation rate and decrease glass transition temperature of the ATPE-DGEBA cured products,resulting in slight decrease of the Young’s modulus and tensile strength,and significant increase of the toughness and elongation of the ATPE-DGEBA cured products.On the other hand,it can remarkably enhance the reactivity of amine with epoxy,much accelerating the curing rate of the ATPE-DGEBA systems.The activation energy of DGEBA cured by BAPTPE,BAMPTPE and BAEPTPE was 53.1,28.5 and 25.4 kJ·mol;,respectively.The as-obtained ATPE-DGEBA cured products are homogeneous, transparent,and show excellent mechanical properties including tensile strength and toughness.Thus they are promising to have important applications in structure adhesives,casting bulk materials,functional coatings,cryogenic engineering, damping and sound absorbing materials.
文摘The cure kinetics of diglycidyl ether of bisphenol A （DGEBA） with hyperbranched poly （3-hydroxyphenyl） phosphate（HHPP） as the curing agent was investigated by means of non-isothermal differential scanning calorimetry （DSC） at various heating rates. The results were compared with the corresponding results by using 1,3-dihydroxybenzene（DHB） as a model compound. The results show that HHPP can enhance the cure reaction of DGEBA, resulting in the decrease of the peak temperature of the curing curve as well as the decrease of the activation energy because of the flexible --P--O-- groups in the backbone of HHPP. However, both the activation energy of the cured polymer and the peak temperature of the curing curve are increased with DHB as a curing agent. The cure kinetics of the DGEBA/HHPP system was calculated by using the isoconversional method given by Malek. It was found that the two-parameter autocatalytic model（Sestak-Berggren equation） is the most adequate one to describe the cure kinetics of the studied System at various heating rates. The obtained non-isothermal DSC curves from the experimental data show the results being accordant with those theoretically calculated.
基金supported by the Key Project of State Tobacco Monoply Administration of China(3300806156)
文摘The mechanism of carotenoid degradation and the changes in the activities of related enzymes in flue-cured tobacco at the leaf-drying stage during the bulk-curing process were studied in order to provide theoretical basis for optimization of curing technology. The effect of different rising speeds of temperature on the carotenoid degradation and the related enzymes activities at the color-fixing stage during the bulk curing process was studied by using the electric-heated fluecuring barn designed by Henan Agricultural University, China, based on curing technology with yellowing at low temperature and moderate humidity and leaf drying at moderate humidity. The results showed that the carotenoid degradation components （β-carotene, lutein, neoxanthin, and violaxthin） decreased gradually at the color-fixing stage during the bulk curing process. The carotenoid degradation components viz.,β-carotene, lutein, neoxanthin, and violaxthin at the slow heating curing （T1） were relatively higher than the rapid heating curing （T2） accounting for 10, 2, 32 and 32% respectively, but there were no differences among treatments （P〉 0.05）. The effect of different conditions of curing on the activities of enzymes related to carotenoids degradation were significant. The lipoxygenase, phenylalanine ammonialyase, peroxidase, and polyphenol oxidase enzymes had a bidirectional effect on the quality of tobacco leaves and it was beneficial to form more premise matter of aroma based on the higher enzyme activities at the early leaf-drying stage. The slow heating could regulate the change in various enzymes＇ activities reasonably, making cell redox reaction to reach the dynamic balance and make the degradation of carotenoids adequately. Meanwhile, it could avoid the occurrence of browning reaction and provide foundation for improving the quality of tobacco and optimization of technology for bulk curing and further enhancing aroma.
基金Project(2008G031-18) supported by the Ministry of Railway Science and Technology Research Foundation of ChinaProject(2010R50034) supported by the Key Science and Technology Innovation Team Program of Zhejiang Province, ChinaProject(2010QZZD018) supported by Leading-edge Research Program of Central South University,China
文摘Steam-cured condition is found to cause larger porosity and worse properties of concrete compared with normal curing condition. For the sake of seeking effective measurements to eliminate this bad effect of steam-cured condition on concrete, the water sorptivity and pore structure of steam-cured concretes exposed to different subsequent curing conditions were investigated after steam-curing treatment. The capillary absorption coefficient and porosity of the corresponding concretes were analyzed, and their mechanisms were also discussed. The results indicate that water sorptivity and pore structure of steam-cured concrete are greatly influenced by the curing condition used in subsequent ages. Exposure steam-cured concrete to air condition has an obviously bad effect on its properties and microstructures. Adopting subsequent curing of immersing steam-cured concrete into about 20℃ water after steam curing period can significantly decrease its capillary absorption coefficient and porosity. Steam-cured concrete with 7 d water curing has minimum capillary absorption coefficient and total porosity. Its water sorptivity is decreased by 23% compared with standard curing concrete and the porosity is 9.6% lower. Moreover, the corresponding gradient of water sorptivity and porosity of steam-cured concrete both decrease, thus mictostructure of concrete becomes more homogeneous.
基金Supported by Project of Zunyi Tobacco Company[ZYJ(2014)No.201407]
文摘[ Objective] This study aimed to investigate the curing performance of polyurethane curing barn and reduce the cost of tobacco leaf flue-curing. [ Meth- odl The temperature control effect, curing effect and curing cost of polyurethane curing barn and traditional bulk curing barn were analyzed and compared. [ Re- suit] The results showed that there were no significant differences in curing performance between two types of curing barns. Horizontal temperature differences in- creased slightly as the temperature rose. Specifically, horizontal temperature differences between each layer ranged from 0.2 ~C to 0.5 ~. Both two types of curing barns exhibited uniform air distribution. Polyurethane curing barn exhibited stable vertical temperature differences. Both two types of curing barns presented good curing effects with slight differences. Polyurethane curing barn exhibited higher economic benefits, lower coal cost, lower electricity cost, lower labor cost and lon- ger service life than traditional bulk curing barn, but its construction cost was higher. [ Conclusion] Polyurethane curing barn exhibits better curing performance with ~ood application prospects.
基金supported by the National Natural Science Foundation of China(51172285 and 51372277)the Fundamental Research Funds for the Central Universities(14CX02060A,15CX02084A)the Natural Science Foundation of Shandong Province(ZR2011EL030)
文摘In order to improve the thermal stability of condensed polynuclear aromatic(COPNA) resin synthesized from vacuum residue, 1,4-benzenedimethanol was added to cure COPNA resin. The curing mechanism was investigated by proton nuclear magnetic resonance spectrometry, solid carbon-13 nuclear magnetic resonance spectrometry and Fourier transform infrared spectroscopy. Microstructures of the uncured and the cured COPNA resins were studied by scanning electron microscopy and X-ray diffractometry. The thermal stability of COPNA resins before and after curing was tested by thermogravimetric analysis. The element composition of the cured COPNA resin heated at different temperatures was analyzed by an element analyzer. The results showed that the uncured COPNA resin reacted with the cross-linking agent during the curing process, and the curing mechanism was confirmed to be the electrophilic substitution reaction. Compared with the uncured COPNA resin, the cured COPNA resin had a smooth surface, well-ordered and streamlined sheet structure with more crystalline solids, better molecular arrangement and orientation. The weight loss process of the uncured and cured COPNA resins was divided into three stages. Carbon residue of the cured COPNA resin was 41.65% at 600 ℃, which was much higher than 25.02% of the uncured COPNA resin, which indicated that the cured COPNA resin had higher thermal stability.
文摘A kind of aziridine crosslinkers was synthesized and used to crosslink acrylate copolymers. The crosslinking properties and curing kinetics of the resin were studied. It was found that with the increase of the content of crosslinker in the emulsion, the mechanical properties and solvent resistance of the resin will be apparently improved, but its glass transition temperature (T.) is very low. The lowest amount of crosslinker used in the acrylic resin emulsion is 0.25%. Curing kinetics studied by DSC show that this curing reaction occurs readily because the apparent activation energy of the reaction is low (65.1 kJ/mol). These results demonstrate that the aziridine crosslinker is indeed a low temperature crosslinking agent and can be used at room temperature.
基金Supported by General Program of Science and Technology Project of China National Tobacco Corporation[ZYB(2012)No.122]Science and Technology Project of Chongqing Branch of China National Tobacco Corporation(NY20110601070010)
文摘[Objective] This study aimed to compare the effects of Chinese quality-improving fragrunce-increasing tobacco flue-curing technology, Chinese three- stage tobaeeo flue-curing technology and Zimbabwean tobaceo flue-euring technology on microscopie structure of flue-cured tobacco leaves to provide theoretical basis for tobacco flue-curing. [ Method ] Middle leaves of tobacco cultivar K326 were collected in Pengshui County of Chongqing City for flue-curing experiment using three flue-curing technologies. Leaf samples were collected regularly in the flue-curing process, to investigate the microscopic structure of flue-cured tobaceo leaves. [ Result] During three flue-curing processes, leaves, palisade tissues and sponge tissues shrank gradually. Three flue-euring processes exhibited significant differ- ences in the peak of tissue shrinkage ： microscopic structure of flue-cured tobacco leaves in Chinese three-stage tobacco flue-curing process shrank earliest, follower by Chinese quality-improving fragrance-increasing tobacco flue-curing process; flue-eured tobacco leaves in Zimbabwean tobacco flue-curing process presented the latest shrinkage. At 84 h post-curing, leaf thickness in three flue-curing processes showed a descend order of Chinese three-stage tobacco flue-curing process 〉 Chinese quality-improving fragrance-increasing tobacco flue-curing process 〉 Zimbabwean tobacco flue-curing process. Upper and lower epidermal cells in Zimb- abwean tobacco flue-curing process ruptured earlier than other two flue-curing processes; eventually, the majority of cells ruptured and mixed with palisade tissues and sponge tissues. In Chinese quality-improving fragranee-increasing tobacco flue-curing process, only a small number of epidermal cells in dried leaves ruptured. Among three flue-curing technologies, Zimbabwean tobacco flue-curing technology exhibited the greatest damage to epidermal cells, followed by Chinese three-stage tobaceo flue-curing technology; Chinese quality-improving fragrance-increasing tobacco flue-curing technology had the minimum damage to epidermal cells. Mese- phyll cross-section exhibited significant morphological changes in stomata. To be specific, at 0 - 12 h post-curing, stomata of tobacco leaves closed with slightly prominent stamatal apparatuses on upper and lower epidermis; at 24 -72 h post-curing, stomata of tobaceo leaves changed gradually from opening to closure with significantly prominent stomatal apparatuses on upper and lower epidermis; at 84 h post-curing, stomata of tobacco leaves closed, and the majority of stomatal appa- ratuses were significantly prominent. In Chinese quality-improving fragrance-increasing tobacco flue-curing process, only a small number of epidermal ceils ruptured at 84 h pest-flue-curing; palisade tissues and sponge tissues shrank almost simultaneously. Significant gaps were observed between palisade tissues and between pal- isade tissues and sponge tissues. Chinese quality-improving fragrance-increasing tobacco flue-curing technology exhibited lower disorder level compared with other two flue-curing technologies. [ Conclusion] Chinese quality-improving fragrance-increasing tobacco flue-curlng technology was conducive to maintaining the micro- scopic structure integrity of flue-cured tobacco leaves and obtaining high-quality flue-cured tobacco leaves.
基金Supported by General Program of Science and Technology Project of China National Tobacco Corporation[ZYB(2012)No.122]Science and Technology Project of Chongqing Branch of China National Tobacco Corporation(NY20110601070010)
文摘[ Objective] This study aimed to compare the effects of low-temperature low-humidity tobacco flue-curing technology, moderate-temperature moderate- humidity tobacco flue-curing technology and moderate-temperature high-humidity tobacco flue-curing technology on submicroscopic structure of flue-cured tobacco leaves to provide theoretical basis for tobacco flue-curing. [ Method] Middle leaves of tobacco cuhivar K326 were collected in Pengshui County of Chongqing City for flue-curing experiment using three flue-curing technologies. Leaf samples were collected regularly in the flue-curing process, to investigate the submicroscopic structure of flue-cured tobacco leaves. [ Result] Morphology changes and structural rupture of chloroplasts occurred at different time during three flue-curing proces- ses. In low-temperature low-humidity flue-curing process, morphology changes and structural rupture of chloroplasts occurred late but rapidly; in moderate-tempera- ture moderate-humidity flue-curing process and moderate-temperature high-humidity flue-curing process, morphology changes and structural rupture of chloroplasts occurred early but slowly. Among these three flue-curing processes, the speed of changes in mitochondria morphology, cristae number and membrane rupture pres- ented an upward order of low-temperature low-humidity flue-curing process 〈 moderate-temperature high-humidity flue-curlng process 〈 moderate-temperature moderate-humidity flue-curing process. In low-temperature low-humldity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 36 -48 h ; in moderate-temperature moderate-humidity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 24 - 36 h; in moderate-temperature high-humidity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 12 - 24 h. [ Conclusion ] Using low-temperature low-humidity flue- curing technology could prolong the maintenance duration of the submicroscopic structure integrity of flue-cured tobacco leaves, which was conducive to fully decom- posing and transforming substances in tobacco leaves and obtaining high-quality flue-cured tobacco leaves.
基金This work was financially supported by the National Natural Science Foundation of China (Grant No. 50039010)
文摘The application of very large floating structure (VLFS) to the utilization of ocean space and exploitation of ocean resources has become one of the issues of great interest in international ocean engineering field. Owing to the advantage of simplicity in structure and low cost of construction and maintenance, box-type VLFS can be used in the calm water area near the coast as the structure configuration of floating airport. In this paper, a 3D linear hydroelastic theory is used to study the dynamic response of box-type VLFS in sinusoidal regular waves. A beam model and a 3D FEM model are respectively employed to describe the dynamic characteristics of the box-type Structure in vacuum. A hydrodynamic model (3D potential theory of flexible body) is applied to investigate the effect of different dry models on the hydroelastic response of box-type structure. Based on the calculation of hydroelastic response in regular waves, the rigid body motion displacement, flexible deflection, and the short term and long term wave induced bending moments are also predicted.
基金Supported by Key Project of Nanping Tobacco Company of Fujian Province(NYK2021-09-03)Key Project of Tongren Tobacco Company of Guizhou Province(202101).
文摘[Objectives]To explore the growth characteristics,nitrogen metabolism and curing characteristics of the new variety NC71 in strongly aromatic tobacco leaves production area.[Methods]With Yunyan 87 as the control and NC71 as the experimental material,the experiment was carried out in Nanyang tobacco area for two consecutive years to study the growth characteristics of tobacco plants,the activity of key enzymes in nitrogen metabolism,the content of secondary metabolites,and the differences of tobacco-related water content,PPO enzyme activity and total phenol content.[Results]NC71 plants had lower height,better appearance quality and lower nicotine,total sugar and chlorine content.NC71 high nitrogen treatment and Yunyan 87 medium nitrogen treatment had similar key enzyme activity of nitrogen metabolism,content of secondary metabolites;Yunyan 87 and NC71 were easy to cure and resistant to curing.[Conclusions]This study provides a reference for measuring the appropriate nitrogen application rate and optimizing the curing process from the activities of the key enzymes NR and GS in nitrogen metabolism at the mature stage of the variety.
文摘A box-type solar cooker with an inclined surface, equipped with a concentration reflector to allow maximum energy to be collected, enabled cooking tests to be carried out in the rainy season. Different thermocouples were implanted on various places of the cooker. The temperature measurements from these sensors were taken every 10 minutes.<span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">The tests presented in this article relate to the preparation of eggs and rice. The absorber temperatures during the tests exceeded 100<span style="white-space:nowrap;">°</span>C. The cooking times were between 1</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">h</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">50</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">min and 2</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">h</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">20 min despite the numerous cloudy periods. The cooker made it possible to reach sufficient temperatures for healthy cooking of food. The results obtained for these first tests are satisfactory and very encouraging.</span></span></span>
基金supported by State Key Laboratory of Powder Metallurgy,Central South University,Changsha,China.
文摘To overcome reliance on molds and the difficulty of fabricating complex geometries with traditional C/C composites,direct ink writing(DIW)with UV/heat dual curing was employed to produce high-performance C/C composites.The rheological properties of the composite inks were systematically analyzed to assess the effects of phenolic resin(PR)and carbon fiber(CF)content.Results show pronounced shear-thinning behavior and strong thixotropy-both essential for stable DIW.Additionally,UV/heat curing behavior was characterized to provide theoretical insights for optimizing curing parameters.Notably,CF addition is found to significantly attenuate UV light penetration compared to pure PR.As CF content increases,the critical UV irradiation energy rises sharply from 68.47 to 911.19 mJ/cm^(2),necessitating precise adjustments to curing parameters.Preforms were pyrolyzed in a carbon tube furnace to examine pore-formation characteristics,and chemical vapor infiltration(CVI)was applied to filling the resulting pores,yielding C/C composites with a flexural strength of 115.19 MPa.
文摘Chronic hepatitis B(CHB)remains a significant global health challenge,affecting more than 250 million individuals worldwide.A functional cure,defined as the loss of hepatitis B surface antigen(HBsAg)and suppression of hepatitis B virus(HBV)DNA to undetectable levels,represents the optimal therapeutic endpoint for managing CHB.However,the complex pathogenesis of CHB,which includes HBV DNA integration,persistence of covalently closed circular DNA,and impaired immune responses,presents substantial barriers to HBsAg clearance.Current therapies offer limited success in achieving a functional cure,with HBsAg seroclearance occurring in only 3%-5%of patients after 10 years of nucleos(t)ide analogs(NAs)therapy and 8%-14%within 3-5 years of pegylated interferon treatment.To overcome these limitations,novel direct-acting antivirals targeting different stages of the HBV life cycle are being investigated.Additionally,immunomodulatory approaches,including therapeutic vaccines and immune checkpoint inhibitors,are being explored to enhance HBV-specific immune responses.The concept of NAs cessation in carefully selected non-cirrhotic patients may accelerate HBsAg loss,although the risks of hepatic flare and hepatocellular carcinoma necessitate rigorous monitoring.This review provides a comprehensive overview of the current understanding of HBsAg seroclearance in CHB,discussing its clinical significance,therapeutic challenges,and evolving treatment landscape in the pursuit of a functional cure.
