This study explores a sensitivity analysis method based on the boundary element method(BEM)to address the computational complexity in acoustic analysis with ground reflection problems.The advantages of BEM in acoustic...This study explores a sensitivity analysis method based on the boundary element method(BEM)to address the computational complexity in acoustic analysis with ground reflection problems.The advantages of BEM in acoustic simulations and its high computational cost in broadband problems are examined.To improve efficiency,a Taylor series expansion is applied to decouple frequency-dependent terms in BEM.Additionally,the SecondOrder Arnoldi(SOAR)model order reduction method is integrated to reduce computational costs and enhance numerical stability.Furthermore,an isogeometric sensitivity boundary integral equation is formulated using the direct differentiation method,incorporating Cauchy principal value integrals and Hadamard finite part integrals to handle singularities.The proposed method improves the computational efficiency,and the acoustic sensitivity analysis provides theoretical support for further acoustic structure optimization.展开更多
This paper discusses the forward and inverse problem for cardiac magnetic fields and electric potentials. A torso-heart model established by boundary element method （BEM） is used for studying the distributions of ca...This paper discusses the forward and inverse problem for cardiac magnetic fields and electric potentials. A torso-heart model established by boundary element method （BEM） is used for studying the distributions of cardiac magnetic fields and electric potentials. Because node-to-node and triangle-to-triangle BEM can lead to discrepant field distributions, their properties and influences are compared. Then based on constructed torso-heart model and supposed current source functional model-current dipole array, the magnetic and electric imaging by optimal constrained linear inverse method are applied at the same time. Through figure and reconstructing parameter comparison, though the magnetic current dipole array imaging possesses better reconstructing effect, however node-to-node BEM and triangleto-triangle BEM make little difference to magnetic and electric imaging.展开更多
This paper presents a novel framework for stochastic analysis of linear elastic fracture problems.Monte Carlo simulation(MCs)is adopted to address the multi-dimensional uncertainties,whose computation cost is reduced ...This paper presents a novel framework for stochastic analysis of linear elastic fracture problems.Monte Carlo simulation(MCs)is adopted to address the multi-dimensional uncertainties,whose computation cost is reduced by combination of Proper Orthogonal Decomposition(POD)and the Radial Basis Function(RBF).In order to avoid re-meshing and retain the geometric exactness,isogeometric boundary element method(IGABEM)is employed for simulation,in which the Non-Uniform Rational B-splines(NURBS)are employed for representing the crack surfaces and discretizing dual boundary integral equations.The stress intensity factors(SIFs)are extracted by M integral method.The numerical examples simulate several cracked structures with various uncertain parameters such as load effects,materials,geometric dimensions,and the results are verified by comparison with the analytical solutions.展开更多
The paper applied the isogeometric boundary element method(IGABEM)to thermoelastic problems.The Non-Uniform Rational B-splines(NURBS)used to construct geometric models are employed to discretize the boundary integral ...The paper applied the isogeometric boundary element method(IGABEM)to thermoelastic problems.The Non-Uniform Rational B-splines(NURBS)used to construct geometric models are employed to discretize the boundary integral formulation of the governing equation.Due to the existence of thermal stress,the domain integral term appears in the boundary integral equation.We resolve this problem by incorporating radial integration method into IGABEM which converts the domain integral to the boundary integral.In this way,IGABEM can maintain its advantages in dimensionality reduction and more importantly,seamless integration of CAD and numerical analysis based on boundary representation.The algorithm is verified by numerical examples.展开更多
This paper presents an elasto-viscoplastic consistent tangent operator (CTO) based boundary element formulation, and application for calculation of path-domain independentJ integrals (extension of the classicalJ integ...This paper presents an elasto-viscoplastic consistent tangent operator (CTO) based boundary element formulation, and application for calculation of path-domain independentJ integrals (extension of the classicalJ integrals) in nonlinear crack analysis. When viscoplastic deformation happens, the effective stresses around the crack tip in the nonlinear region is allowed to exceed the loading surface, and the pure plastic theory is not suitable for this situation. The concept of consistency employed in the solution of increment viscoplastic problem, plays a crucial role in preserving the quadratic rate asymptotic convergence of iteractive schemes based on Newton's method. Therefore, this paper investigates the viscoplastic crack problem, and presents an implicit viscoplastic algorithm using the CTO concept in a boundary element framework for path-domain independentJ integrals. Applications are presented with two numerical examples for viscoplastic crack problems andJ integrals.展开更多
This work presents some numerical aspects of isogeometric boundary element methods(IGABEM).The behavior of hyper-singular and nearly-singular integration is first explored on the distorted NURBS surface.Several numeri...This work presents some numerical aspects of isogeometric boundary element methods(IGABEM).The behavior of hyper-singular and nearly-singular integration is first explored on the distorted NURBS surface.Several numerical treatments are proposed to enhance the quadrature in the framework of isogeometric analysis.Then a numerical implementation of IGABEM on the trimmed NURBS is detailed.Based on this idea,the surface crack problem is modeled incorporation with the phantom element method.The proposed method allows the crack to intersect with the boundary of the body while preserving the original parametrization of the NURBS-based CAD geometry.展开更多
In this paper, the domain integral of the form of Poisson equation is translatedinto complete boundary integral by the fundamental solution of higher-order Laplaceoperator, the dimensions of the problem can be contrac...In this paper, the domain integral of the form of Poisson equation is translatedinto complete boundary integral by the fundamental solution of higher-order Laplaceoperator, the dimensions of the problem can be contracted into one. The numericalexamples for Stokes equations show that this method is efficient.展开更多
In this work, the vortex methods for Euler equations with initial boundary value problem is considered, Poisson equations are solved using boundary element methods which can be seen to require less operations to compu...In this work, the vortex methods for Euler equations with initial boundary value problem is considered, Poisson equations are solved using boundary element methods which can be seen to require less operations to compute the velocity field from the vorticity by Chorin([6]). We prove that the rate of convergence of the boundary element schemes can be independent of the vortex blob parameters.展开更多
Consider a time-harmonic electromagnetic plane wave incident on a biperiodic structure in R^3. The periodic structure separates two homogeneous regions. The medium inside the structure is chiral and nonhomogeneous. In...Consider a time-harmonic electromagnetic plane wave incident on a biperiodic structure in R^3. The periodic structure separates two homogeneous regions. The medium inside the structure is chiral and nonhomogeneous. In this paper, variational formulations coupling finite element methods in the chiral medium with a method of integral equations on the periodic interfaces are studied. The well-posedness of the continuous and discretized problems is established. Uniform convergence for the coupling variational approximations of the model problem is obtained.展开更多
In this paper, we represent a new numerical method for solving the nonstationary Stokes equations in an unbounded domain. The technique consists in coupling the boundary integral and finite element methods. The variat...In this paper, we represent a new numerical method for solving the nonstationary Stokes equations in an unbounded domain. The technique consists in coupling the boundary integral and finite element methods. The variational formulation and well posedness of the coupling method are obtained. The convergence and optimal estimates for the approximation solution are provided.展开更多
The analysis of the dynamics of surface girders is of great importance in the design of engineering structures such as steel welded bridge plane girders or concrete plate-column structures.This work is an extension of...The analysis of the dynamics of surface girders is of great importance in the design of engineering structures such as steel welded bridge plane girders or concrete plate-column structures.This work is an extension of the classical deterministic problem of free vibrations of thin(Kirchhoff)plates.Themain aim of this work is the study of stochastic eigenvibrations of thin(Kirchhoff)elastic plates resting on internal continuous and column supports by the Boundary Element Method(BEM).This work is a continuation of previous research related to the random approach in plate analysis using the BEM.The static fundamental solution(Green’s function)is applied,coupled with a nonsingular formulation of the boundary and domain integral equations.These are derived using a modified and simplified formulation of the boundary conditions,inwhich there is no need to introduce theKirchhoff forces on a plate boundary.The role of the Kirchhoff corner forces is played by the boundary elements placed close to a single corner.Internal column or linear continuous supports are introduced using the Bezine technique,where the additional collocation points are introduced inside a plate domain.This allows for significant simplification of the BEM computational algorithm.An application of the polynomial approximations in the Least Squares Method(LSM)recovery of the structural response is done.The probabilistic analysis will employ three independent computational approaches:semi-analytical method(SAM),stochastic perturbation technique(SPT),and Monte-Carlo simulations.Numerical investigations include the fundamental eigenfrequencies of an elastic,thin,homogeneous,and isotropic plate.展开更多
Hydraulic fracturing plays a critical role in enhancing shale gas production in deep shale reservoirs.Conventional hydraulic fracturing simulation methods rely on prefabricated grids,which can be hindered by the chall...Hydraulic fracturing plays a critical role in enhancing shale gas production in deep shale reservoirs.Conventional hydraulic fracturing simulation methods rely on prefabricated grids,which can be hindered by the challenge of being computationally overpowered.This study proposes an efficient fracturing simulator to analyze fracture morphology during hydraulic fracturing processes in deep shale gas reservoirs.The simulator integrates the boundary element displacement discontinuity method and the finite volume method to model the fluid-solid coupling process by employing a pseudo-3D fracture model to calculate the fracture height.In particular,the Broyden iteration method was introduced to improve the computational efficiency and model robustness;it achieved a 46.6%reduction in computation time compared to the Newton-Raphson method.The influences of horizontal stress differences,natural fracture density,and natural fracture angle on the modified zone of the reservoir were simulated,and the following results were observed.(1)High stress difference reservoirs have smaller stimulated reservoir area than low stress difference reservoirs.(2)A higher natural fracture angle resulted in larger modification zones at low stress differences,while the effect of a natural fracture angle at high stress differences was not significant.(3)High-density and long natural fracture zones played a significant role in enhancing the stimulated reservoir area.These findings are critical for comprehending the impact of geological parameters on deep shale reservoirs.展开更多
We investigate time domain boundary element methods for the wave equation in R3, with a view towards sound emission problems in computational acoustics. The Neumann problem is reduced to a time dependent integral equa...We investigate time domain boundary element methods for the wave equation in R3, with a view towards sound emission problems in computational acoustics. The Neumann problem is reduced to a time dependent integral equation for the hypersingular operator, and we present a priori and a posteriori error estimates for conforming Galerkin approxima- tions in the more general case of a screen. Numerical experiments validate the convergence of our boundary element scheme and compare it with the numerical approximations ob- tained from an integral equation of the second kind. Computations in a half-space illustrate the influence of the reflection properties of a flat street.展开更多
The present article is concerned with the numerical solution of boundary integral e- quations by an adaptive wavelet boundary element method. This method approximates the solution with a computational complexity that ...The present article is concerned with the numerical solution of boundary integral e- quations by an adaptive wavelet boundary element method. This method approximates the solution with a computational complexity that is proportional to the solution＇s best N-term approximation. The focus of this article is on algorithmic issues which includes the crucial building blocks and details about the efficient implementation. By numerical examples for the Laplace equation and the Helmholtz equation, solved for different geome- tries and right-hand sides, we validate the feasibility and efficiency of the adaptive wavelet boundary element method.展开更多
A stochastic boundary element method (SBEM) is developed for 3-Dproblems with body forces. The integral equations of SBEM are established by the approach of partial derivation with respect to stochastic variables, con...A stochastic boundary element method (SBEM) is developed for 3-Dproblems with body forces. The integral equations of SBEM are established by the approach of partial derivation with respect to stochastic variables, considering the strengthlimit, rotation speeds and material density to be the fundamental stochastic variables.The method developed is applied to analyzing the strength reliability of the turbo diskof an aero-engine.展开更多
In this paper, an identification method to estimate the unbalances is introduced, which is based on the boundary element method (BEM). By using the vibration response measured at some points on the flexible rotor the ...In this paper, an identification method to estimate the unbalances is introduced, which is based on the boundary element method (BEM). By using the vibration response measured at some points on the flexible rotor the unbalances can be identified conveniently. Therefore, the rotor can be balanced without test runs.展开更多
In the present paper, we examine the performance of an efficient type of wave-absorbing porous marine structure under the attack of regular oblique waves by using a Multi-Domain Boundary Element Method(MDBEM). The str...In the present paper, we examine the performance of an efficient type of wave-absorbing porous marine structure under the attack of regular oblique waves by using a Multi-Domain Boundary Element Method(MDBEM). The structure consists of two perforated vertical thin barriers creating what can be called a wave absorbing chamber system. The barriers are surface piercing, thereby eliminating wave overtopping. The problem of the interaction of obliquely incident linear waves upon a pair of perforated barriers is first formulated in the context of linear diffraction theory. The resulting boundary integral equation, which is matched with far-field solutions presented in terms of analytical series with unknown coefficients, as well as the appropriate boundary conditions at the free surface, seabed, and barriers, is then solved numerically using MDBEM. Dissipation of the wave energy due to the presence of the perforated barriers is represented by a simple yet effective relation in terms of the porosity parameter appropriate for thin perforated walls. The results are presented in terms of reflection and transmission coefficients. The effects of the incident wave angles, relative water depths, porosities, depths of the walls, and other major parameters of interest are explored.展开更多
A high order boundary element method was developed for the complex velocity potential problem. The method ensures not only the continuity of the potential at the nodes of each element but also the velocity. It can be ...A high order boundary element method was developed for the complex velocity potential problem. The method ensures not only the continuity of the potential at the nodes of each element but also the velocity. It can be applied to a variety of velocity potential problems. The present paper, however, focused on its application to the problem of water entry of a wedge with varying speed. The continuity of the velocity achieved herein is particularly important for this kind of nonlinear free surface flow problem, because when the time stepping method is used, the free surface is updated through the velocity obtained at each node and the accuracy of the velocity is therefore crucial. Calculation was made for a case when the distance S that the wedge has travelled and time t follow the relationship s=Dtα, where D and α are constants, which is found to lead to a self similar flow field when the effect due to gravity is ignored.展开更多
In this study,a comprehensive parametric analysis was performed on non-uniform excitation of V-shaped topography using the boundary element method in time domain.For this purpose,wave scattering analysis was carried o...In this study,a comprehensive parametric analysis was performed on non-uniform excitation of V-shaped topography using the boundary element method in time domain.For this purpose,wave scattering analysis was carried out on a topography subjected to the SV-wave for different predominant frequencies and shape ratios.Based on the numerical results,new coherence and time delay functions are proposed to generate non-uniform ground motion for topographic irregularities.The efficiency and accuracy of the proposed functions for real engineering problems are indicated by comparison with observations reported in previous literature.展开更多
For higher accuracy in simulating the transformation of three dimensional waves, in consideration of the advantages of constant panels and linear elements, a combined boundary elements is applied in this research. The...For higher accuracy in simulating the transformation of three dimensional waves, in consideration of the advantages of constant panels and linear elements, a combined boundary elements is applied in this research. The method can be used to remove the transverse vibration due to the accumulation of computational errors. A combined boundary condition of sponge layer and Sommerfeld radiation condition is used to remove the reflected waves from the computing domain. By following the water particle on the water surface, the third order Stokes wave transform is simulated by the numerical wave flume technique. The computed results are in good agreement with theoretical ones.展开更多
基金supported by the Shanxi Scholarship Council of China(Grant No.2023-036)the Natural Science Foundation of Shanxi Province(Grant No.202303021222020).
文摘This study explores a sensitivity analysis method based on the boundary element method(BEM)to address the computational complexity in acoustic analysis with ground reflection problems.The advantages of BEM in acoustic simulations and its high computational cost in broadband problems are examined.To improve efficiency,a Taylor series expansion is applied to decouple frequency-dependent terms in BEM.Additionally,the SecondOrder Arnoldi(SOAR)model order reduction method is integrated to reduce computational costs and enhance numerical stability.Furthermore,an isogeometric sensitivity boundary integral equation is formulated using the direct differentiation method,incorporating Cauchy principal value integrals and Hadamard finite part integrals to handle singularities.The proposed method improves the computational efficiency,and the acoustic sensitivity analysis provides theoretical support for further acoustic structure optimization.
基金Project supported by the State Key Development Program for Basic Research of China (Grant No. 2006CB601007)the National Natural Science Foundation of China (Grant No. 10674006)the National High Technology Research and Development Program of China (Grant No. 2007AA03Z238)
文摘This paper discusses the forward and inverse problem for cardiac magnetic fields and electric potentials. A torso-heart model established by boundary element method （BEM） is used for studying the distributions of cardiac magnetic fields and electric potentials. Because node-to-node and triangle-to-triangle BEM can lead to discrepant field distributions, their properties and influences are compared. Then based on constructed torso-heart model and supposed current source functional model-current dipole array, the magnetic and electric imaging by optimal constrained linear inverse method are applied at the same time. Through figure and reconstructing parameter comparison, though the magnetic current dipole array imaging possesses better reconstructing effect, however node-to-node BEM and triangleto-triangle BEM make little difference to magnetic and electric imaging.
基金The authors thank the financial support of National Natural Science Foundation of China(NSFC)under Grant(Nos.51904202,11902212,11901578).
文摘This paper presents a novel framework for stochastic analysis of linear elastic fracture problems.Monte Carlo simulation(MCs)is adopted to address the multi-dimensional uncertainties,whose computation cost is reduced by combination of Proper Orthogonal Decomposition(POD)and the Radial Basis Function(RBF).In order to avoid re-meshing and retain the geometric exactness,isogeometric boundary element method(IGABEM)is employed for simulation,in which the Non-Uniform Rational B-splines(NURBS)are employed for representing the crack surfaces and discretizing dual boundary integral equations.The stress intensity factors(SIFs)are extracted by M integral method.The numerical examples simulate several cracked structures with various uncertain parameters such as load effects,materials,geometric dimensions,and the results are verified by comparison with the analytical solutions.
基金This study was funded by the National Natural Science Foundation of China(NSFC)(Grant Nos.11702238,51904202 and 11902212)and Nanhu Scholars Program for Young Scholars of XYNU.
文摘The paper applied the isogeometric boundary element method(IGABEM)to thermoelastic problems.The Non-Uniform Rational B-splines(NURBS)used to construct geometric models are employed to discretize the boundary integral formulation of the governing equation.Due to the existence of thermal stress,the domain integral term appears in the boundary integral equation.We resolve this problem by incorporating radial integration method into IGABEM which converts the domain integral to the boundary integral.In this way,IGABEM can maintain its advantages in dimensionality reduction and more importantly,seamless integration of CAD and numerical analysis based on boundary representation.The algorithm is verified by numerical examples.
基金The project supported by National Natural Science Foundation of China(9713008)Zhejiang Natural Science Foundation Special Funds No. RC.9601
文摘This paper presents an elasto-viscoplastic consistent tangent operator (CTO) based boundary element formulation, and application for calculation of path-domain independentJ integrals (extension of the classicalJ integrals) in nonlinear crack analysis. When viscoplastic deformation happens, the effective stresses around the crack tip in the nonlinear region is allowed to exceed the loading surface, and the pure plastic theory is not suitable for this situation. The concept of consistency employed in the solution of increment viscoplastic problem, plays a crucial role in preserving the quadratic rate asymptotic convergence of iteractive schemes based on Newton's method. Therefore, this paper investigates the viscoplastic crack problem, and presents an implicit viscoplastic algorithm using the CTO concept in a boundary element framework for path-domain independentJ integrals. Applications are presented with two numerical examples for viscoplastic crack problems andJ integrals.
基金National Natural Science Foundation of China(NSFC)under Grant(No.51904202).
文摘This work presents some numerical aspects of isogeometric boundary element methods(IGABEM).The behavior of hyper-singular and nearly-singular integration is first explored on the distorted NURBS surface.Several numerical treatments are proposed to enhance the quadrature in the framework of isogeometric analysis.Then a numerical implementation of IGABEM on the trimmed NURBS is detailed.Based on this idea,the surface crack problem is modeled incorporation with the phantom element method.The proposed method allows the crack to intersect with the boundary of the body while preserving the original parametrization of the NURBS-based CAD geometry.
文摘In this paper, the domain integral of the form of Poisson equation is translatedinto complete boundary integral by the fundamental solution of higher-order Laplaceoperator, the dimensions of the problem can be contracted into one. The numericalexamples for Stokes equations show that this method is efficient.
文摘In this work, the vortex methods for Euler equations with initial boundary value problem is considered, Poisson equations are solved using boundary element methods which can be seen to require less operations to compute the velocity field from the vorticity by Chorin([6]). We prove that the rate of convergence of the boundary element schemes can be independent of the vortex blob parameters.
基金the NSF grants DMS-0604790the NSF grants CCF-0514078+2 种基金the NSF grants EAR-0724527the ONR grant N000140210365the National Science Foundation of China grant 10428105
文摘Consider a time-harmonic electromagnetic plane wave incident on a biperiodic structure in R^3. The periodic structure separates two homogeneous regions. The medium inside the structure is chiral and nonhomogeneous. In this paper, variational formulations coupling finite element methods in the chiral medium with a method of integral equations on the periodic interfaces are studied. The well-posedness of the continuous and discretized problems is established. Uniform convergence for the coupling variational approximations of the model problem is obtained.
文摘In this paper, we represent a new numerical method for solving the nonstationary Stokes equations in an unbounded domain. The technique consists in coupling the boundary integral and finite element methods. The variational formulation and well posedness of the coupling method are obtained. The convergence and optimal estimates for the approximation solution are provided.
基金funded by research grant OPUS no.2021/41/B/ST8/02432 entitled Probabilistic entropy in engineering computations sponsored by The National Science Center in Polandthe Institute of Structural Analysis of Poznan University of Technology in the framework of the internal research grant 0411/SBAD/0010.
文摘The analysis of the dynamics of surface girders is of great importance in the design of engineering structures such as steel welded bridge plane girders or concrete plate-column structures.This work is an extension of the classical deterministic problem of free vibrations of thin(Kirchhoff)plates.Themain aim of this work is the study of stochastic eigenvibrations of thin(Kirchhoff)elastic plates resting on internal continuous and column supports by the Boundary Element Method(BEM).This work is a continuation of previous research related to the random approach in plate analysis using the BEM.The static fundamental solution(Green’s function)is applied,coupled with a nonsingular formulation of the boundary and domain integral equations.These are derived using a modified and simplified formulation of the boundary conditions,inwhich there is no need to introduce theKirchhoff forces on a plate boundary.The role of the Kirchhoff corner forces is played by the boundary elements placed close to a single corner.Internal column or linear continuous supports are introduced using the Bezine technique,where the additional collocation points are introduced inside a plate domain.This allows for significant simplification of the BEM computational algorithm.An application of the polynomial approximations in the Least Squares Method(LSM)recovery of the structural response is done.The probabilistic analysis will employ three independent computational approaches:semi-analytical method(SAM),stochastic perturbation technique(SPT),and Monte-Carlo simulations.Numerical investigations include the fundamental eigenfrequencies of an elastic,thin,homogeneous,and isotropic plate.
文摘Hydraulic fracturing plays a critical role in enhancing shale gas production in deep shale reservoirs.Conventional hydraulic fracturing simulation methods rely on prefabricated grids,which can be hindered by the challenge of being computationally overpowered.This study proposes an efficient fracturing simulator to analyze fracture morphology during hydraulic fracturing processes in deep shale gas reservoirs.The simulator integrates the boundary element displacement discontinuity method and the finite volume method to model the fluid-solid coupling process by employing a pseudo-3D fracture model to calculate the fracture height.In particular,the Broyden iteration method was introduced to improve the computational efficiency and model robustness;it achieved a 46.6%reduction in computation time compared to the Newton-Raphson method.The influences of horizontal stress differences,natural fracture density,and natural fracture angle on the modified zone of the reservoir were simulated,and the following results were observed.(1)High stress difference reservoirs have smaller stimulated reservoir area than low stress difference reservoirs.(2)A higher natural fracture angle resulted in larger modification zones at low stress differences,while the effect of a natural fracture angle at high stress differences was not significant.(3)High-density and long natural fracture zones played a significant role in enhancing the stimulated reservoir area.These findings are critical for comprehending the impact of geological parameters on deep shale reservoirs.
文摘We investigate time domain boundary element methods for the wave equation in R3, with a view towards sound emission problems in computational acoustics. The Neumann problem is reduced to a time dependent integral equation for the hypersingular operator, and we present a priori and a posteriori error estimates for conforming Galerkin approxima- tions in the more general case of a screen. Numerical experiments validate the convergence of our boundary element scheme and compare it with the numerical approximations ob- tained from an integral equation of the second kind. Computations in a half-space illustrate the influence of the reflection properties of a flat street.
文摘The present article is concerned with the numerical solution of boundary integral e- quations by an adaptive wavelet boundary element method. This method approximates the solution with a computational complexity that is proportional to the solution＇s best N-term approximation. The focus of this article is on algorithmic issues which includes the crucial building blocks and details about the efficient implementation. By numerical examples for the Laplace equation and the Helmholtz equation, solved for different geome- tries and right-hand sides, we validate the feasibility and efficiency of the adaptive wavelet boundary element method.
文摘A stochastic boundary element method (SBEM) is developed for 3-Dproblems with body forces. The integral equations of SBEM are established by the approach of partial derivation with respect to stochastic variables, considering the strengthlimit, rotation speeds and material density to be the fundamental stochastic variables.The method developed is applied to analyzing the strength reliability of the turbo diskof an aero-engine.
文摘In this paper, an identification method to estimate the unbalances is introduced, which is based on the boundary element method (BEM). By using the vibration response measured at some points on the flexible rotor the unbalances can be identified conveniently. Therefore, the rotor can be balanced without test runs.
文摘In the present paper, we examine the performance of an efficient type of wave-absorbing porous marine structure under the attack of regular oblique waves by using a Multi-Domain Boundary Element Method(MDBEM). The structure consists of two perforated vertical thin barriers creating what can be called a wave absorbing chamber system. The barriers are surface piercing, thereby eliminating wave overtopping. The problem of the interaction of obliquely incident linear waves upon a pair of perforated barriers is first formulated in the context of linear diffraction theory. The resulting boundary integral equation, which is matched with far-field solutions presented in terms of analytical series with unknown coefficients, as well as the appropriate boundary conditions at the free surface, seabed, and barriers, is then solved numerically using MDBEM. Dissipation of the wave energy due to the presence of the perforated barriers is represented by a simple yet effective relation in terms of the porosity parameter appropriate for thin perforated walls. The results are presented in terms of reflection and transmission coefficients. The effects of the incident wave angles, relative water depths, porosities, depths of the walls, and other major parameters of interest are explored.
文摘A high order boundary element method was developed for the complex velocity potential problem. The method ensures not only the continuity of the potential at the nodes of each element but also the velocity. It can be applied to a variety of velocity potential problems. The present paper, however, focused on its application to the problem of water entry of a wedge with varying speed. The continuity of the velocity achieved herein is particularly important for this kind of nonlinear free surface flow problem, because when the time stepping method is used, the free surface is updated through the velocity obtained at each node and the accuracy of the velocity is therefore crucial. Calculation was made for a case when the distance S that the wedge has travelled and time t follow the relationship s=Dtα, where D and α are constants, which is found to lead to a self similar flow field when the effect due to gravity is ignored.
文摘In this study,a comprehensive parametric analysis was performed on non-uniform excitation of V-shaped topography using the boundary element method in time domain.For this purpose,wave scattering analysis was carried out on a topography subjected to the SV-wave for different predominant frequencies and shape ratios.Based on the numerical results,new coherence and time delay functions are proposed to generate non-uniform ground motion for topographic irregularities.The efficiency and accuracy of the proposed functions for real engineering problems are indicated by comparison with observations reported in previous literature.
基金National Natural Science Foundation of China(No.49876026)
文摘For higher accuracy in simulating the transformation of three dimensional waves, in consideration of the advantages of constant panels and linear elements, a combined boundary elements is applied in this research. The method can be used to remove the transverse vibration due to the accumulation of computational errors. A combined boundary condition of sponge layer and Sommerfeld radiation condition is used to remove the reflected waves from the computing domain. By following the water particle on the water surface, the third order Stokes wave transform is simulated by the numerical wave flume technique. The computed results are in good agreement with theoretical ones.
