A new boron complex of calix[4]arene was synthesized by the reaction of calix[4]arene with BMS; and the structure of the product was characterized by IR- (HNMR)-H-1. (CNMR)-C-13, (BNMR)-B-11 and MS spectra.
A novel pyridine-phenol boron complex[（dppy）BF] was encapsulated into polymer/silica composite matrix by sol-gel process. UV-Vis absorption spectra show that this process can control the aggregation structure of com...A novel pyridine-phenol boron complex[（dppy）BF] was encapsulated into polymer/silica composite matrix by sol-gel process. UV-Vis absorption spectra show that this process can control the aggregation structure of complex （dppy）BF. The results of photoluminescence of （dppy）BF in sol-gel composite film indicate that both fluorescence intensity and photostability are markedly increased using this method compared with other methods, which increases the practical significance of such composite film.展开更多
A method was proposed to determine boron trifluoride in boron trifluoride complex using fluoride ion selective electrode(ISE). Hydroxide was chosen to mask aluminum for the determination of 0.01—0.1 mol/L of fluoride...A method was proposed to determine boron trifluoride in boron trifluoride complex using fluoride ion selective electrode(ISE). Hydroxide was chosen to mask aluminum for the determination of 0.01—0.1 mol/L of fluoride. The simulation indicated that the permissible aluminum masked at a certain p H value was limited and hardly related to F-concentration and boric acid. It is better to control p H value below 11.5 and the aluminum concentration within 0.025 mol/L to minimize the interference of hydroxide to the fluoride ISE. The decomposition conditions of boron trifluoride by aluminum chloride were investigated. It is found that the F-detection ratio will approach 1.0 if the Al/F molar ratio is 0.3—0.7 and aluminum concentration is no more than 0.02 mol/L when heated at 80 ℃ for 10 min. In one word, hydroxide is quite fit to mask aluminum for samples which contain high content of fluoride and aluminum and the BF3 content can be successfully determined by this method.展开更多
The relation of boron trifluoride concentration with conductivity in boron trifluoride methanol solution(BF_3-CH_3OH)was power exponent fitted in low concentration range. The kinetics of the reaction between boron tri...The relation of boron trifluoride concentration with conductivity in boron trifluoride methanol solution(BF_3-CH_3OH)was power exponent fitted in low concentration range. The kinetics of the reaction between boron trifluoride methanol complex and sodium methoxide to produce enriched ^(10)B methylborate was proposed based on a detailed mechanism study, and was verified by acid-base titration method and conductivity method. It was found that this reaction is first order reaction and the rate constant is 0.022 min^(-1) at 338 K(65 ℃), the activity energy is 65 k J/mol. In addition, it was found that the conductivity method is more feasible to measure the kinetic curve than acid-base titration method.展开更多
Plain carbon steels were dipped in molten aluminum bath at 720°C ±5°C and diffused for 1, 2.5 and 6 hours respectively and then boronized at 950°C for 6 hours. The oxidation, hot-corrosion and abra...Plain carbon steels were dipped in molten aluminum bath at 720°C ±5°C and diffused for 1, 2.5 and 6 hours respectively and then boronized at 950°C for 6 hours. The oxidation, hot-corrosion and abrasion resistance behavior were examined. The experimental results showed the compounds of the aluminized layer, from the surface to the matrix, were composed of Fe2Al5 ( n -phase ) .. Fe3Al ( -phase ) and a phase. The microstructure of aluminized plus complex boronized were similar to that simplex boronized. The XRD analysis results indicated that there existed Fe2B> Fe2AlB2and Fe2Als in this kind of layer. The simplex aluminized layers still remained bright gray appearance when oxidized at 950°C, but complex boronized layer was not able to resist oxidization at the temperature. Both the layers of complex boronized and aluminized had the same anti-oxidization level in the circulative oxidization tests, and also good anti-corrosion ability in molten salt medium. Under dry abrasive conditions, wear resistance of complex boronized layer was superior to the aluminized layer.展开更多
Ludwigite is a kind of complex iron ore containing boron, iron, and magnesium, and it is the most promising boron resource in China. Selective reduction of iron oxide is the key step for the comprehensive utilization ...Ludwigite is a kind of complex iron ore containing boron, iron, and magnesium, and it is the most promising boron resource in China. Selective reduction of iron oxide is the key step for the comprehensive utilization of ludwigite. In the present work, the reduction mechanism of ludwigite was investigated. The thermogravimetry and differential scanning calorimetry analysis and isothermal reduction of ludwigite/coal composite pellet were performed. Ludwigite yielded a lower reduction starting temperature and a higher final reduction degree compared with the traditional iron concentrates. Higher specific surface area and more fine cracks might be the main reasons for the better reducibility of ludwigite. Reducing temperature highly affected the reaction fraction and microstructure of the reduced pellets, which are closely related to the separation degree of boron and iron. Increasing reducing temperature benefited the boron and iron magnetic separation. Optimum magnetic separation results could be obtained when the pellet was reduced at 1300°C. The separated boron-rich non-magnetic concentrate presented poor crystalline structure, and its extraction efficiency for boron reached 64.3%. The obtained experimental results can provide reference for the determination of the comprehensive utilization flow sheet of ludwigite.展开更多
This work investigates the suppression and compensation effect of oxygen on the behaviors and characteristics of heavily boron-doped microwave plasma chemical vapor deposition(MPCVD)diamond films.The suppression effec...This work investigates the suppression and compensation effect of oxygen on the behaviors and characteristics of heavily boron-doped microwave plasma chemical vapor deposition(MPCVD)diamond films.The suppression effect of oxygen on boron incorporation is observed by an improvement in crystal quality when oxygen is added during the diamond doping process.A relatively low hole concentration is expected and verified by Hall effect measurements due to the compensation effect of oxygen as a deep donor in diamond.A low acceptor concentration,high compensation donor concentration and relatively larger acceptor ionization energy are then induced by the incorporation of oxygen;however,a heavily boron-doped diamond film with high crystal quality can also be expected.The formation of an oxygen–boron complex structure instead of oxygen substitution,as indicated by the results of x-ray photoelectron spectroscopy,is suggested to be more responsible for the observed enhanced compensation effect due to its predicted low formation energy.Meanwhile,density functional theory calculations show that the boron–oxygen complex structure is easily formed in diamond with a formation energy of-0.83 eV.This work provides a comprehensive understanding of oxygen compensation in heavily boron-doped diamond.展开更多
Regulation of oxygen on properties of moderately boron-doped diamond films is fully investigated.Results show that,with adding a small amount of oxygen(oxygen-to-carbon ratio<5.0%),the crystal quality of diamond is...Regulation of oxygen on properties of moderately boron-doped diamond films is fully investigated.Results show that,with adding a small amount of oxygen(oxygen-to-carbon ratio<5.0%),the crystal quality of diamond is improved,and a suppression effect of residual nitrogen is observed.With increasing ratio of O/C from 2.5%to 20.0%,the hole concentration is firstly increased then reduced.This change of hole concentration is also explained.Moreover,the results of Hall effect measurement with temperatures from 300 K to 825 K show that,with adding a small amount of oxygen,boron and oxygen complex structures(especially B_(3)O and B_(4)O)are formed and exhibit as shallow donor in diamond,which results in increase of donor concentration.With further increase of ratio of O/C,the inhibitory behaviors of oxygen on boron leads to decrease of acceptor concentration(the optical emission spectroscopy has shown that it is decreased with ratio of O/C more than 10.0%).This work demonstrates that oxygen-doping induced increasement of the crystalline and surface quality could be restored by the co-doping with oxygen.The technique could achieve boron-doped diamond films with both high quality and acceptable hole concentration,which is applicable to electronic level of usage.展开更多
文摘A new boron complex of calix[4]arene was synthesized by the reaction of calix[4]arene with BMS; and the structure of the product was characterized by IR- (HNMR)-H-1. (CNMR)-C-13, (BNMR)-B-11 and MS spectra.
基金Supported by the National Basic Research Program of China(No2007CB80800)
文摘A novel pyridine-phenol boron complex[（dppy）BF] was encapsulated into polymer/silica composite matrix by sol-gel process. UV-Vis absorption spectra show that this process can control the aggregation structure of complex （dppy）BF. The results of photoluminescence of （dppy）BF in sol-gel composite film indicate that both fluorescence intensity and photostability are markedly increased using this method compared with other methods, which increases the practical significance of such composite film.
基金Supported by the Independent Innovation Fund of Tianjin University(No.1307)
文摘A method was proposed to determine boron trifluoride in boron trifluoride complex using fluoride ion selective electrode(ISE). Hydroxide was chosen to mask aluminum for the determination of 0.01—0.1 mol/L of fluoride. The simulation indicated that the permissible aluminum masked at a certain p H value was limited and hardly related to F-concentration and boric acid. It is better to control p H value below 11.5 and the aluminum concentration within 0.025 mol/L to minimize the interference of hydroxide to the fluoride ISE. The decomposition conditions of boron trifluoride by aluminum chloride were investigated. It is found that the F-detection ratio will approach 1.0 if the Al/F molar ratio is 0.3—0.7 and aluminum concentration is no more than 0.02 mol/L when heated at 80 ℃ for 10 min. In one word, hydroxide is quite fit to mask aluminum for samples which contain high content of fluoride and aluminum and the BF3 content can be successfully determined by this method.
基金Supported by the Independent Innovation Fund of Tianjin University(No.1307)
文摘The relation of boron trifluoride concentration with conductivity in boron trifluoride methanol solution(BF_3-CH_3OH)was power exponent fitted in low concentration range. The kinetics of the reaction between boron trifluoride methanol complex and sodium methoxide to produce enriched ^(10)B methylborate was proposed based on a detailed mechanism study, and was verified by acid-base titration method and conductivity method. It was found that this reaction is first order reaction and the rate constant is 0.022 min^(-1) at 338 K(65 ℃), the activity energy is 65 k J/mol. In addition, it was found that the conductivity method is more feasible to measure the kinetic curve than acid-base titration method.
文摘Plain carbon steels were dipped in molten aluminum bath at 720°C ±5°C and diffused for 1, 2.5 and 6 hours respectively and then boronized at 950°C for 6 hours. The oxidation, hot-corrosion and abrasion resistance behavior were examined. The experimental results showed the compounds of the aluminized layer, from the surface to the matrix, were composed of Fe2Al5 ( n -phase ) .. Fe3Al ( -phase ) and a phase. The microstructure of aluminized plus complex boronized were similar to that simplex boronized. The XRD analysis results indicated that there existed Fe2B> Fe2AlB2and Fe2Als in this kind of layer. The simplex aluminized layers still remained bright gray appearance when oxidized at 950°C, but complex boronized layer was not able to resist oxidization at the temperature. Both the layers of complex boronized and aluminized had the same anti-oxidization level in the circulative oxidization tests, and also good anti-corrosion ability in molten salt medium. Under dry abrasive conditions, wear resistance of complex boronized layer was superior to the aluminized layer.
基金financially supported by the China Postdoctoral Science Foundation(No.2018T110046)the National Natural Science Foundation of China(No.51274033)
文摘Ludwigite is a kind of complex iron ore containing boron, iron, and magnesium, and it is the most promising boron resource in China. Selective reduction of iron oxide is the key step for the comprehensive utilization of ludwigite. In the present work, the reduction mechanism of ludwigite was investigated. The thermogravimetry and differential scanning calorimetry analysis and isothermal reduction of ludwigite/coal composite pellet were performed. Ludwigite yielded a lower reduction starting temperature and a higher final reduction degree compared with the traditional iron concentrates. Higher specific surface area and more fine cracks might be the main reasons for the better reducibility of ludwigite. Reducing temperature highly affected the reaction fraction and microstructure of the reduced pellets, which are closely related to the separation degree of boron and iron. Increasing reducing temperature benefited the boron and iron magnetic separation. Optimum magnetic separation results could be obtained when the pellet was reduced at 1300°C. The separated boron-rich non-magnetic concentrate presented poor crystalline structure, and its extraction efficiency for boron reached 64.3%. The obtained experimental results can provide reference for the determination of the comprehensive utilization flow sheet of ludwigite.
基金the National Key Research and Development Program of China(Grant Nos.2018YFB0406502,2017YFF0210800,and 2017YFB0403003)the National Natural Science Foundation of China(Grant Nos.61774081,61775203,61574075,61974059,61674077,61774081,and 91850112)+2 种基金the State Key Research and Development Project of Jiangsu,China(Grant No.BE2018115)State Key Laboratory of Wide-Bandgap Semiconductor Power Electric Devices(Grant No.2017KF001)Anhui University Natural Science Research Project(Grant No.KJ2021A0037).
文摘This work investigates the suppression and compensation effect of oxygen on the behaviors and characteristics of heavily boron-doped microwave plasma chemical vapor deposition(MPCVD)diamond films.The suppression effect of oxygen on boron incorporation is observed by an improvement in crystal quality when oxygen is added during the diamond doping process.A relatively low hole concentration is expected and verified by Hall effect measurements due to the compensation effect of oxygen as a deep donor in diamond.A low acceptor concentration,high compensation donor concentration and relatively larger acceptor ionization energy are then induced by the incorporation of oxygen;however,a heavily boron-doped diamond film with high crystal quality can also be expected.The formation of an oxygen–boron complex structure instead of oxygen substitution,as indicated by the results of x-ray photoelectron spectroscopy,is suggested to be more responsible for the observed enhanced compensation effect due to its predicted low formation energy.Meanwhile,density functional theory calculations show that the boron–oxygen complex structure is easily formed in diamond with a formation energy of-0.83 eV.This work provides a comprehensive understanding of oxygen compensation in heavily boron-doped diamond.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2018YFB0406502,2017YFF0210800,and 2017YFB0403003)the National Natural Science Foundation of China(Grant Nos.61774081,61775203,61574075,61974059,61674077,and 91850112)+2 种基金the State Key Research and Development Project of Jiangsu,China(Grant No.BE2018115)State Key Laboratory of Wide-Bandgap Semiconductor Power Electric Devices(Grant No.2017KF001)Anhui University Natural Science Research Project(Grant No.KJ2021A0037)
文摘Regulation of oxygen on properties of moderately boron-doped diamond films is fully investigated.Results show that,with adding a small amount of oxygen(oxygen-to-carbon ratio<5.0%),the crystal quality of diamond is improved,and a suppression effect of residual nitrogen is observed.With increasing ratio of O/C from 2.5%to 20.0%,the hole concentration is firstly increased then reduced.This change of hole concentration is also explained.Moreover,the results of Hall effect measurement with temperatures from 300 K to 825 K show that,with adding a small amount of oxygen,boron and oxygen complex structures(especially B_(3)O and B_(4)O)are formed and exhibit as shallow donor in diamond,which results in increase of donor concentration.With further increase of ratio of O/C,the inhibitory behaviors of oxygen on boron leads to decrease of acceptor concentration(the optical emission spectroscopy has shown that it is decreased with ratio of O/C more than 10.0%).This work demonstrates that oxygen-doping induced increasement of the crystalline and surface quality could be restored by the co-doping with oxygen.The technique could achieve boron-doped diamond films with both high quality and acceptable hole concentration,which is applicable to electronic level of usage.
