In most Suzuki–Miyaura carbon-carbon cross-coupling reactions,the borabicyclo[3.3.1]nonane scaffold(9-BBN)only serves as an auxiliary facilitating the transmetalation step and thus is transformed into by-products.The...In most Suzuki–Miyaura carbon-carbon cross-coupling reactions,the borabicyclo[3.3.1]nonane scaffold(9-BBN)only serves as an auxiliary facilitating the transmetalation step and thus is transformed into by-products.There are rare examples where the 9-BBN derivatives serve as the potentially diverse C8 building blocks in cross-coupling reactions.Herein,we report a cobalt-catalyzed migratory carboncarbon cross-coupling reaction of the in situ formed 9-BBN ate complexes to afford diverse aryl-and alkyl-functionalized cyclooctenes.Preliminary mechanistic studies suggest the oxidation-induced cisbicyclo[3.3.0]oct-1-ylborane is the key intermediate in this migratory cross-coupling reaction,which promotes the development of other diverse migratory cross-coupling of borate complexes.展开更多
Designing transition metal nickel-cobalt-based battery-type electrode materials driven by anions is crucial for achieving rapid OH-ion transport under electrochemical activation conditions,thereby improving capacitanc...Designing transition metal nickel-cobalt-based battery-type electrode materials driven by anions is crucial for achieving rapid OH-ion transport under electrochemical activation conditions,thereby improving capacitance performance.Herein,borate anions are selected through theoretical calculations,and twodimensional(2D)defect-rich amorphous nickel-cobalt-based borate is synthesized via a facile chemical reduction method.Under potentiostatic modification,activated products(NCB-G-E)are obtained.In situ Raman spectra reveal that electron-deficient borate extracts electrons from metal centers,facilitating the oxidation state transition of Ni and Co.Theoretical calculations show that in situ adsorbed borate regulates the d-band centers of metal sites,enhancing OH^(-)intermediate adsorption.Meanwhile,borate anion adsorption accelerates the deprotonation and activation processes.Electrochemical tests demonstrate that NCB-G-E displays superior capacitance performance,with a high quality specific capacity of383.3 mA h g^(-1)and 65% retention rate at 30 A g^(-1),surpassing most nickel-cobalt-based electrodes.The assembled asymmetric supercapacitor presents an impressive energy density of 68.2 Wh kg^(-1)and good cycling stability.This work highlights the role of electron-deficient borate in tuning metal band structure and promoting oxidation state transition through synergistic defect advantages,offering new prospects for advanced battery-type energy storage materials.展开更多
The prediction of new fluorooxoborates as ultraviolet(UV)/deep ultraviolet(DUV)opto-electronic functional materials from a largely unexplored chemical space is a challenging task.It has been suggested that the anionic...The prediction of new fluorooxoborates as ultraviolet(UV)/deep ultraviolet(DUV)opto-electronic functional materials from a largely unexplored chemical space is a challenging task.It has been suggested that the anionic frameworks formed by B–O and B–O–F units significantly determine the physical properties of fluorooxoborates.Therefore,the rational design of anionic frameworks could facilitate the materials discovery process.Herein,we propose that a candidate anionic framework can be efficiently derived from an existing one by slightly altering its oxygen content.Following this idea,we hypothesized the existence of a 1D[B_(3)O_(5)F]_(∞)chain from the wellknown 2D[B_(6)O_(9)F_(2_)]_(∞)layer.Accordingly,seven CaB_(3)O_(5)F structures with the expected anionic framework were successfully predicted.First-principles calculations show that all these structures have potential in the UV/DUV birefringent or nonlinear optical(NLO)material field,indicating that the 1D[B_(3)O_(5)F]_(∞)chain is indeed a promising anionic framework for achieving UV/DUV birefringent and NLO performance.展开更多
The Li metal battery with ultrahigh-nickel cathode(LiNi_(x)M_(1-x)O_(2),M=Mn,Co,and x≥0.9)under high-voltage is regarded as one of the most promising approaches to fulfill the ambitious target of 400 Wh/kg.However,th...The Li metal battery with ultrahigh-nickel cathode(LiNi_(x)M_(1-x)O_(2),M=Mn,Co,and x≥0.9)under high-voltage is regarded as one of the most promising approaches to fulfill the ambitious target of 400 Wh/kg.However,the practical application is impeded by the instability of electrode/electrolyte interface and Ni-rich cathode itself.Herein we proposed an electron-defect electrolyte additive trimethyl borate(TMB)which is paired with the commercial carbonate electrolyte to construct highly conductive fluorine-and boron-rich cathode electrolyte interface(CEI)on LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)(NCM90)surface and solid electrolyte interphase(SEI)on lithium metal surface.The modified CEI effectively mitigates the structural transformation from layered to disordered rock-salt phase,and consequently alleviate the dissolution of transition metal ions(TMs)and its“cross-talk”effect,while the enhanced SEI enables stable lithium plating/striping and thus demonstrated good compatibility between electrolyte and lithium metal anode.As a result,the common electrolyte with 1 wt%TMB enables 4.7 V NCM90/Li cell cycle stably over 100 cycles with 70%capacity retention.This work highlights the significance of the electron-defect boron compounds for designing desirable interfacial chemistries to achieve high performance NCM90/Li battery under high voltage operation.展开更多
Oleic acid (denoted as OA) surface-caped lanthanum borate nanorods, abbreviated as OA/LaBO3·H2O, were prepared via hydrothermal method. The microstructures of the as-prepared OA/LaBO3·H2O nanorods were chara...Oleic acid (denoted as OA) surface-caped lanthanum borate nanorods, abbreviated as OA/LaBO3·H2O, were prepared via hydrothermal method. The microstructures of the as-prepared OA/LaBO3·H2O nanorods were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The friction and wear properties of OA/LaBO3·H2O nanorods in rapeseed oil were evaluated with a four-ball tribo-tester. The results show that the as-prepared OA/LaBO3·H2O nanorods are hydrophobic and display nanorods morphology with uniform diameter of about 50 nm and length of up to 500 nm. In the meantime, OA/LaBO3·H2O nanorods can obviously improve the anti-wear and friction-reducing capacities of rapeseed oil, and the optimal anti-wear and friction-reducing properties of rapeseed oil were obtained at an OA/LaBO3·H2O content of 1% (mass fraction).展开更多
The structure of LiSrY2（BO3）3 has been solved by single-crystal X-ray diffraction analysis at 298 and 113 K on different diffractometers.It crystallizes in trigonal with space group P-3m1（No.164）.The cell paramete...The structure of LiSrY2（BO3）3 has been solved by single-crystal X-ray diffraction analysis at 298 and 113 K on different diffractometers.It crystallizes in trigonal with space group P-3m1（No.164）.The cell parameters at room temperature are as follows：a = 10.3345（9）,c = 6.4049（11） ,V = 592.41（13） 3,Z = 3,Mr = 448.81,F（000） = 618,μ = 21.327 mm-1 and Dc = 3.774 g/cm3.The crystal structure consists of gear-like [BY6O33] groups which are linked together by corner-sharing to form a two-dimensional layer parallel to the ab plane.These layers are connected one after another by sharing oxygen atoms with B（2） atoms along the c direction to construct a three-dimensional framework.Li and Sr atoms just occupy the cavities formed by oxygen atoms.In addition,the vibrational spectroscopy of LiSrY2（BO3）3 and photoluminescence properties of the Eu3＋ doped LiSrY2（BO3）3 were also studied.展开更多
Single crystals of LiY6O5（BO3）3 were obtained by the flux method and its structure was determined by a four-circle automatic diffractometer with a MoKα radiation. It crystallizes in monoclinic, space group P21/n wi...Single crystals of LiY6O5（BO3）3 were obtained by the flux method and its structure was determined by a four-circle automatic diffractometer with a MoKα radiation. It crystallizes in monoclinic, space group P21/n with a = 8.330（3）, b = 15.444（4）, c = 8.780（3）°A,β = 91.85（3）°, V = 1129.0（6）°A^3, Z = 4, Mr= 796.83, F（000） = 1456, μ = 30.567 mm^-1, Dc= 4.688 g/cm^3, the final R = 0.0722 and wR = 0.1304. It exhibits a three-dimensional fiamework of yttrium-oxygen polyhedra interconnected by common edges and corners. B and Li atoms are located in the planes and cavities formed by oxygen atoms, respectively.展开更多
The title compound was obtained by the flux method and its structure was determined. It crystallizes in monoclinic, space group P2/c with a = 11.0024（17）, b = 9.2979（14）, c = 14.500（2） A, β = 110.879（2）°...The title compound was obtained by the flux method and its structure was determined. It crystallizes in monoclinic, space group P2/c with a = 11.0024（17）, b = 9.2979（14）, c = 14.500（2） A, β = 110.879（2）°, V = 1385.9（4） A^3, Z = 4, Mr= 908.38, F（000） = 1592, p = 19.601 mm^-1, Dc = 4.353 g/cm^3, the final R = 0.0481 and wR = 0.1257 for 2532 observed reflections with I 〉 2σ（I）, The Rb3La3（BO3）4 structure can be viewed as a 3-dimensional scaffold-like framework constructed by La-O polyhedra and BO3 groups. Two Rb＋ ions locate in a channel along the a direction and the rest one in a cavity.展开更多
The effect of interface reaction on the fractal dimensions of fracture surface in aluminum borate whisker-reinforced aluminum alloy 6061 composite was investigated. The composite was fabricated by squeeze-casting tech...The effect of interface reaction on the fractal dimensions of fracture surface in aluminum borate whisker-reinforced aluminum alloy 6061 composite was investigated. The composite was fabricated by squeeze-casting technique. The fracture surfaces created in tensile test were measured by vertical sectioning method. Fractal phenomena were found in two plots, in which the measuring units were from 3 to 15 μm and 1 to 5 μm, respectively. The relation was established between the tensile properties and fractal dimension with measuring units of 3-15 μm. The results show that the ultimate tensile strength increases while the fracture surface roughness increases with fractal dimension increasing due to the change in fracture mode depending on the degree of interface reaction status induced by heat treatment. But when the measuring units are 1-5 μm, fractal dimension does not change with heat treatment.展开更多
Nanoparticle of cerium borate with a size of about 50 nm was synthesized via sol-gel precipitation method under micro-emulsion by oleic acid,using Na2B4O7 and Ce（NO3）3 aqueous solution as raw materials,and the morph...Nanoparticle of cerium borate with a size of about 50 nm was synthesized via sol-gel precipitation method under micro-emulsion by oleic acid,using Na2B4O7 and Ce（NO3）3 aqueous solution as raw materials,and the morphology and microstructure of as-prepared particles were characterized by means of scanning electron microscopy（SEM） equipped with an energy-dispersive X-ray spectrometer（EDS）,X-ray diffraction（XRD）,infrared spectroscopy（IR）,and thermogravimetric analysis（TGA）.Two methods to disperse the particles into base oil were employed,and the results derived from the four-ball tribotester indicated that the friction coefficient of the base oil by the addition of the nanoscale cerium borate particles diminished greatly,and the anti-wear properties also depended on the dispersion methods.展开更多
Mixed strontium-yttrium borate phosphor Sr3Y2（BO3）4 doped with Eu^3＋ ions was obtained by the sol-gel Pechini method. Crystal structure of the synthesized compound was analyzed by X-ray powder diffraction. Optimal ...Mixed strontium-yttrium borate phosphor Sr3Y2（BO3）4 doped with Eu^3＋ ions was obtained by the sol-gel Pechini method. Crystal structure of the synthesized compound was analyzed by X-ray powder diffraction. Optimal conditions for the synthesis were found. Photophysical properties of the phosphor samples were investigated by collecting excitation and luminescence spectra as well as measuring lumi- nescence lifetime. Judd-Ofelt analysis showed that Eu^3＋ ions occupied Y^3＋ sites in the crystalline network. The studied compound showed a red emission with the quantum yield of 54%-55% and can be potentially used as phosphor for plasma display panels and luminescent tubes.展开更多
The microstructural features and the consequent mechanical properties were characterized in aluminium borate whisker(ABOw)(5, 10 and 15 wt.%) reinforced commercially-pure aluminium composites fabricated by conventiona...The microstructural features and the consequent mechanical properties were characterized in aluminium borate whisker(ABOw)(5, 10 and 15 wt.%) reinforced commercially-pure aluminium composites fabricated by conventional powder metallurgy technique. The aluminium powder and the whisker were effectively blended by a semi-powder metallurgy method. The blended powder mixtures were cold compacted and sintered at 600 ℃. The sintered composites were characterized for microstructural features by optical microscopy(OM), scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), transmission electron microscopy(TEM) and X-ray diffraction(XRD) analysis. Porosity in the composites with variation in ABOw contents was determined. The effect of variation in content of ABOw on mechanical properties, viz. hardness, bending strength and compressive strength of the composites was evaluated. The dry sliding wear behaviour was evaluated at varying sliding distance at constant loads. Maximum flexural strength of 172 MPa and compressive strength of 324 MPa with improved hardness around HV 40.2 are obtained in composite with 10 wt.% ABOw. Further increase in ABOw content deteriorates the properties. A substantial increase in wear resistance is also observed with 10 wt.% ABOw. The excellent combination of mechanical properties of Al-10 wt.%ABOw composites is attributed to good interfacial bonds, less porosity and uniformity in the microstructure.展开更多
Nanometer crystal samarium borate with a particle size of 20～40?nm was prepared using replacing solvent drying technique. The wear resistance and load carrying capacity of 500SN base oil could be improved and the fri...Nanometer crystal samarium borate with a particle size of 20～40?nm was prepared using replacing solvent drying technique. The wear resistance and load carrying capacity of 500SN base oil could be improved and the friction coefficient could be decreased by the addition of nanometer samarium borate. But the dosage of samarium borate nanoparticles had to be controlled at a relatively low level, a higher concentration of nanoparticles was not of beneficial to the tribological performance of the oil. The optimal dosage of nanometer samarium borate is 1.0%. Tribochemical reactions took place in the tribological process, which resulted in the formation of deposition products including diboron trioxide and disamarium trioxide. Fe 2B and FeB were also found on the wear scar. The improvement of tribological properties of the oil comes from the formation of deposition layer and permeating layer. [展开更多
Tris(trimethylsilyl)borate(TMSB) has been intensively studied to improve the performances of lithiumion batteries. However, it is still an interesting issue needed to be resolved for the research on the Li^(+) solvati...Tris(trimethylsilyl)borate(TMSB) has been intensively studied to improve the performances of lithiumion batteries. However, it is still an interesting issue needed to be resolved for the research on the Li^(+) solvation structure affected by TMSB additive. Herein, the electrochemical tests, quantum chemistry calculations, potential-resolved in-situ electrochemical impedance spectroscopy measurements and surface analyses were used to explore the effects of Li^(+) solvation structure with TMSB additive on the formation of the cathode electrolyte interface(CEI) film in LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)/Li half cells. The results reveal that the TMSB additive is easy to complex with Li^(+) ion, thus weaken the intermolecular force between Li^(+) ions and ethylene carbonate solvent, which is benefit for the cycle performance. Besides, the changed Li^(+) solvation structure results in a thin and dense CEI film containing compounds with Si–O and B–O bonds which is favorable to the transfer of Li^(+) ions. As a result, the performances of the LNCM811/Li half cells are effectively improved. This research provides a new idea to construct a high-performance CEI film by adjusting the Li^(+) solvation structures.展开更多
The complexation reaction between borate ions and phenol-formaldehyde resol resin in aqueous solution was studied by pH measurement, small model molecules and infrared spectroscopy. The results show that the complexat...The complexation reaction between borate ions and phenol-formaldehyde resol resin in aqueous solution was studied by pH measurement, small model molecules and infrared spectroscopy. The results show that the complexation can proceed completely and rapidly at room temperature. Borate ion attacks phenol hydroxyl groups and adjacent position hydroxymethyl groups on the phenol ring of the resin, and forms the coordinate bond between boron atom in borate ion and oxygen atom in the hydroxyl groups. The complexation is a quantitative reaction. The complex is a six member ring containing two oxygens and one boron. The complexation can release hydrogen ions resulting in the decreasing pH in the resin solution.展开更多
A novel ternary borate, sodium strontium pentaborate, NaSrB5O9, has been prepared by solid-state reaction below 800 ℃. The single-crystal X-ray structural analysis showed that NaSrB5O9 crystallizes in monoclinic, spa...A novel ternary borate, sodium strontium pentaborate, NaSrB5O9, has been prepared by solid-state reaction below 800 ℃. The single-crystal X-ray structural analysis showed that NaSrB5O9 crystallizes in monoclinic, space group P21/c with a = 6.499（2）, b = 13.979（3）, c = 8.045（2）A, β = 106.92（2）°, V = 699.2（3）A^3, Z = 4, Mr = 308.66, Dc = 2.932 g/cm^3, μ = 7.804 mm^-1, F（000） = 584, R = 0.0264 and wR = 0.0621 for 2426 observed reflections and 146 variables. NaSrB5O9 is a layered compound containing double ring B5O11 building units composed of two BO4 tetrahedra and three BO3 triangles. Each B5O11 unit is connected to four other equivalent units through exocyclic oxygen atoms to form a two-dimensional ∞^2 [B5O9]^3- layer. Symmetry-center related layers are stacked along the b axis and held together by Na^＋ and Sr^2＋ cations via electrostatic interactions.展开更多
Terbium doped strontium-lanthanum borate, Sr3La2（BO3）4：Tb （SLB）, was studied by semi-empirical computational ap- proaches using PM6 parametrization and the SPARKLE model for lanthanide（Ⅲ） （Ln（Ⅲ）） cations....Terbium doped strontium-lanthanum borate, Sr3La2（BO3）4：Tb （SLB）, was studied by semi-empirical computational ap- proaches using PM6 parametrization and the SPARKLE model for lanthanide（Ⅲ） （Ln（Ⅲ）） cations. The focus of interest was on structural aspects, e.g. the cell parameters and distribution of dopant ions between various sites as a function of dopant concentration. The cell linear dimensions were calculated to decrease linearly with increasing dopant molar concentration. SLB offered two sites for the dopant. Calculations predicted that one of these sites should be preferred by the Tb（Ⅲ） dopant. The optimized cell dimensions as well as the total energies differed for structures with dopant exclusively in site 1 or site 2. Computational predictions were tested against experimental results obtained for SLB synthesized by sol-gel method varying the dopant concentration. The agreement be- tween experimental and computational results was found sufficiently promising to continue the computational studies.展开更多
Dy^3＋-doped borate glasses （LBLB） with high effective visible fluorescence emission were synthesized. The absorption spectrum and fluorescence spectrum of this glass were measured and analyzed. By using J-O theory,...Dy^3＋-doped borate glasses （LBLB） with high effective visible fluorescence emission were synthesized. The absorption spectrum and fluorescence spectrum of this glass were measured and analyzed. By using J-O theory, the oscillator strengths for some absorption transitions were calculated according to the absorption spectra. The intensity parameters Ω1 （t = 2, 4, 6） of Dy^3＋ were determined by using a least-squares fitting approach, and the values are 4.04 × 10^-20, 1.30 × 10^-20 and 1.82 × 10^-20 cm, respectively. The root-mean-square deviation δrma was calculated. Under UV light excitation, Dy^3＋-doped borate glasses （LBLB） emit intense yellowish white lights. The excitation spectrum indicates that argon laser is the effective excitation source in Dy^3＋-doped LBLB glasses展开更多
Copper coating was deposited on the surface of aluminum borate whisker by an electroless plating method.This method was used to modify the interfacial property of squeeze-casting aluminum borate whisker reinforced 606...Copper coating was deposited on the surface of aluminum borate whisker by an electroless plating method.This method was used to modify the interfacial property of squeeze-casting aluminum borate whisker reinforced 6061Al matrix composite.Interface observation indicates that the spinel reaction(MgAl2O4) is hindered by the copper coating,and the difference in interfacial reaction degree affects the tensile property and aging behavior of the composite.For the composite with less spinel reaction(MgAl2O4),its peak-aging process are postponed due to less depletion of magnesium.On the fracture surface of copper-coated composite dimples and fractures of whiskers are more,but on the fracture surface of uncoated composite pull-out of whiskers are more than that on the coated one.In uncoated composite the fracture generally originates from the near-interface-region.展开更多
Tribological properties of 150SN mineral oil and lubricating oils containing triethanolamine borate(TBE)with and without electromagnetic field impact were evaluated on a modified four-ball tribo-tester.The characteris...Tribological properties of 150SN mineral oil and lubricating oils containing triethanolamine borate(TBE)with and without electromagnetic field impact were evaluated on a modified four-ball tribo-tester.The characteristics of the worn surfaces were studied by scanning electronic microscopy(SEM),energy dispersive spectrometry(EDS)and X-ray photoelectron spectroscopy(XPS).Moreover,the tribological mechanisms are discussed from the viewpoint of physical effect and chemical effect.The results indicated that the friction coefficients and wear scar diameters(WSDs)lubricated by 150SN mineral oil under electromagnetic field were higher than those without electromagnetism impact.The WSDs of steel balls lubricated by TBE-doped oils under electromagnetic field were smaller than those obtained from non-electromagnetic field,but the friction coefficients were higher than those under non-electromagnetic field.A protective coating consists of wear particles could be formed on the frictional surface due to the physical effect of electromagnetic field on wear debris.The electromagnetic field could facilitate the interaction of elemental boron and nitrogen in TBE with metal interfaces,and contributes to forming tribo-chemical reaction film to reduce friction and wear.展开更多
基金supported by the National Natural Science Foundation of China(No.22171046)the Hundred-Talent Project of Fujian(No.50021113)Fuzhou University(No.0480-00489503)。
文摘In most Suzuki–Miyaura carbon-carbon cross-coupling reactions,the borabicyclo[3.3.1]nonane scaffold(9-BBN)only serves as an auxiliary facilitating the transmetalation step and thus is transformed into by-products.There are rare examples where the 9-BBN derivatives serve as the potentially diverse C8 building blocks in cross-coupling reactions.Herein,we report a cobalt-catalyzed migratory carboncarbon cross-coupling reaction of the in situ formed 9-BBN ate complexes to afford diverse aryl-and alkyl-functionalized cyclooctenes.Preliminary mechanistic studies suggest the oxidation-induced cisbicyclo[3.3.0]oct-1-ylborane is the key intermediate in this migratory cross-coupling reaction,which promotes the development of other diverse migratory cross-coupling of borate complexes.
基金supported by the National Natural Science Foundation of China(22478422,22238012,and 22178384)Science Foundation of China University of Petroleum,Beijing(2462024QNXZ003)CHN Energy Investment Group(GJNY23-23)。
文摘Designing transition metal nickel-cobalt-based battery-type electrode materials driven by anions is crucial for achieving rapid OH-ion transport under electrochemical activation conditions,thereby improving capacitance performance.Herein,borate anions are selected through theoretical calculations,and twodimensional(2D)defect-rich amorphous nickel-cobalt-based borate is synthesized via a facile chemical reduction method.Under potentiostatic modification,activated products(NCB-G-E)are obtained.In situ Raman spectra reveal that electron-deficient borate extracts electrons from metal centers,facilitating the oxidation state transition of Ni and Co.Theoretical calculations show that in situ adsorbed borate regulates the d-band centers of metal sites,enhancing OH^(-)intermediate adsorption.Meanwhile,borate anion adsorption accelerates the deprotonation and activation processes.Electrochemical tests demonstrate that NCB-G-E displays superior capacitance performance,with a high quality specific capacity of383.3 mA h g^(-1)and 65% retention rate at 30 A g^(-1),surpassing most nickel-cobalt-based electrodes.The assembled asymmetric supercapacitor presents an impressive energy density of 68.2 Wh kg^(-1)and good cycling stability.This work highlights the role of electron-deficient borate in tuning metal band structure and promoting oxidation state transition through synergistic defect advantages,offering new prospects for advanced battery-type energy storage materials.
基金supported by the National Natural Science Foundation of China(Grant No.52403305)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0880000)+1 种基金Tianchi Talent Program of Xinjiang Uygur Autonomous Region(Grant No.2024000068)Postdoctoral Fellow-ship Program(Grade C)(Grant No.GZC20232959)。
文摘The prediction of new fluorooxoborates as ultraviolet(UV)/deep ultraviolet(DUV)opto-electronic functional materials from a largely unexplored chemical space is a challenging task.It has been suggested that the anionic frameworks formed by B–O and B–O–F units significantly determine the physical properties of fluorooxoborates.Therefore,the rational design of anionic frameworks could facilitate the materials discovery process.Herein,we propose that a candidate anionic framework can be efficiently derived from an existing one by slightly altering its oxygen content.Following this idea,we hypothesized the existence of a 1D[B_(3)O_(5)F]_(∞)chain from the wellknown 2D[B_(6)O_(9)F_(2_)]_(∞)layer.Accordingly,seven CaB_(3)O_(5)F structures with the expected anionic framework were successfully predicted.First-principles calculations show that all these structures have potential in the UV/DUV birefringent or nonlinear optical(NLO)material field,indicating that the 1D[B_(3)O_(5)F]_(∞)chain is indeed a promising anionic framework for achieving UV/DUV birefringent and NLO performance.
基金financially supported by the National Key Research and Development Program of China(2022YFE0206300)the National Natural Science Foundation of China(U21A2081,22075074,22209047)+1 种基金the Natural Science Foundation of Hunan Province(2022JJ40140)the Hunan Provincial Department of Education Outstanding Youth Project(22B0864,23B0037)。
文摘The Li metal battery with ultrahigh-nickel cathode(LiNi_(x)M_(1-x)O_(2),M=Mn,Co,and x≥0.9)under high-voltage is regarded as one of the most promising approaches to fulfill the ambitious target of 400 Wh/kg.However,the practical application is impeded by the instability of electrode/electrolyte interface and Ni-rich cathode itself.Herein we proposed an electron-defect electrolyte additive trimethyl borate(TMB)which is paired with the commercial carbonate electrolyte to construct highly conductive fluorine-and boron-rich cathode electrolyte interface(CEI)on LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)(NCM90)surface and solid electrolyte interphase(SEI)on lithium metal surface.The modified CEI effectively mitigates the structural transformation from layered to disordered rock-salt phase,and consequently alleviate the dissolution of transition metal ions(TMs)and its“cross-talk”effect,while the enhanced SEI enables stable lithium plating/striping and thus demonstrated good compatibility between electrolyte and lithium metal anode.As a result,the common electrolyte with 1 wt%TMB enables 4.7 V NCM90/Li cell cycle stably over 100 cycles with 70%capacity retention.This work highlights the significance of the electron-defect boron compounds for designing desirable interfacial chemistries to achieve high performance NCM90/Li battery under high voltage operation.
基金Project(50975282)supported by the National Natural Science Foundation of China
文摘Oleic acid (denoted as OA) surface-caped lanthanum borate nanorods, abbreviated as OA/LaBO3·H2O, were prepared via hydrothermal method. The microstructures of the as-prepared OA/LaBO3·H2O nanorods were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The friction and wear properties of OA/LaBO3·H2O nanorods in rapeseed oil were evaluated with a four-ball tribo-tester. The results show that the as-prepared OA/LaBO3·H2O nanorods are hydrophobic and display nanorods morphology with uniform diameter of about 50 nm and length of up to 500 nm. In the meantime, OA/LaBO3·H2O nanorods can obviously improve the anti-wear and friction-reducing capacities of rapeseed oil, and the optimal anti-wear and friction-reducing properties of rapeseed oil were obtained at an OA/LaBO3·H2O content of 1% (mass fraction).
基金supported by the Major Research Project of Xi’an University of Arts and Science (No.zd200906)the Special Fund of Education Committee of Shaanxi Province (No.09JK743)
文摘The structure of LiSrY2（BO3）3 has been solved by single-crystal X-ray diffraction analysis at 298 and 113 K on different diffractometers.It crystallizes in trigonal with space group P-3m1（No.164）.The cell parameters at room temperature are as follows：a = 10.3345（9）,c = 6.4049（11） ,V = 592.41（13） 3,Z = 3,Mr = 448.81,F（000） = 618,μ = 21.327 mm-1 and Dc = 3.774 g/cm3.The crystal structure consists of gear-like [BY6O33] groups which are linked together by corner-sharing to form a two-dimensional layer parallel to the ab plane.These layers are connected one after another by sharing oxygen atoms with B（2） atoms along the c direction to construct a three-dimensional framework.Li and Sr atoms just occupy the cavities formed by oxygen atoms.In addition,the vibrational spectroscopy of LiSrY2（BO3）3 and photoluminescence properties of the Eu3＋ doped LiSrY2（BO3）3 were also studied.
基金This work was supported by the Chinese Academy of Sciences (2004AA31g130)
文摘Single crystals of LiY6O5（BO3）3 were obtained by the flux method and its structure was determined by a four-circle automatic diffractometer with a MoKα radiation. It crystallizes in monoclinic, space group P21/n with a = 8.330（3）, b = 15.444（4）, c = 8.780（3）°A,β = 91.85（3）°, V = 1129.0（6）°A^3, Z = 4, Mr= 796.83, F（000） = 1456, μ = 30.567 mm^-1, Dc= 4.688 g/cm^3, the final R = 0.0722 and wR = 0.1304. It exhibits a three-dimensional fiamework of yttrium-oxygen polyhedra interconnected by common edges and corners. B and Li atoms are located in the planes and cavities formed by oxygen atoms, respectively.
文摘The title compound was obtained by the flux method and its structure was determined. It crystallizes in monoclinic, space group P2/c with a = 11.0024（17）, b = 9.2979（14）, c = 14.500（2） A, β = 110.879（2）°, V = 1385.9（4） A^3, Z = 4, Mr= 908.38, F（000） = 1592, p = 19.601 mm^-1, Dc = 4.353 g/cm^3, the final R = 0.0481 and wR = 0.1257 for 2532 observed reflections with I 〉 2σ（I）, The Rb3La3（BO3）4 structure can be viewed as a 3-dimensional scaffold-like framework constructed by La-O polyhedra and BO3 groups. Two Rb＋ ions locate in a channel along the a direction and the rest one in a cavity.
基金Project (20070213042) supported by Specialized Research Fund for the Doctoral Program of Higher Education, China
文摘The effect of interface reaction on the fractal dimensions of fracture surface in aluminum borate whisker-reinforced aluminum alloy 6061 composite was investigated. The composite was fabricated by squeeze-casting technique. The fracture surfaces created in tensile test were measured by vertical sectioning method. Fractal phenomena were found in two plots, in which the measuring units were from 3 to 15 μm and 1 to 5 μm, respectively. The relation was established between the tensile properties and fractal dimension with measuring units of 3-15 μm. The results show that the ultimate tensile strength increases while the fracture surface roughness increases with fractal dimension increasing due to the change in fracture mode depending on the degree of interface reaction status induced by heat treatment. But when the measuring units are 1-5 μm, fractal dimension does not change with heat treatment.
文摘Nanoparticle of cerium borate with a size of about 50 nm was synthesized via sol-gel precipitation method under micro-emulsion by oleic acid,using Na2B4O7 and Ce（NO3）3 aqueous solution as raw materials,and the morphology and microstructure of as-prepared particles were characterized by means of scanning electron microscopy（SEM） equipped with an energy-dispersive X-ray spectrometer（EDS）,X-ray diffraction（XRD）,infrared spectroscopy（IR）,and thermogravimetric analysis（TGA）.Two methods to disperse the particles into base oil were employed,and the results derived from the four-ball tribotester indicated that the friction coefficient of the base oil by the addition of the nanoscale cerium borate particles diminished greatly,and the anti-wear properties also depended on the dispersion methods.
基金Project supported by International Visegrad Fund (51000547 (2010-2011))
文摘Mixed strontium-yttrium borate phosphor Sr3Y2（BO3）4 doped with Eu^3＋ ions was obtained by the sol-gel Pechini method. Crystal structure of the synthesized compound was analyzed by X-ray powder diffraction. Optimal conditions for the synthesis were found. Photophysical properties of the phosphor samples were investigated by collecting excitation and luminescence spectra as well as measuring lumi- nescence lifetime. Judd-Ofelt analysis showed that Eu^3＋ ions occupied Y^3＋ sites in the crystalline network. The studied compound showed a red emission with the quantum yield of 54%-55% and can be potentially used as phosphor for plasma display panels and luminescent tubes.
基金support provided by the Central Instrument Facility Centre(CIFC)of IIT(BHU)the Department of Ceramic Engineering especially Advance Refractory Lab(ARL)of IIT(BHU)Varanasi。
文摘The microstructural features and the consequent mechanical properties were characterized in aluminium borate whisker(ABOw)(5, 10 and 15 wt.%) reinforced commercially-pure aluminium composites fabricated by conventional powder metallurgy technique. The aluminium powder and the whisker were effectively blended by a semi-powder metallurgy method. The blended powder mixtures were cold compacted and sintered at 600 ℃. The sintered composites were characterized for microstructural features by optical microscopy(OM), scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), transmission electron microscopy(TEM) and X-ray diffraction(XRD) analysis. Porosity in the composites with variation in ABOw contents was determined. The effect of variation in content of ABOw on mechanical properties, viz. hardness, bending strength and compressive strength of the composites was evaluated. The dry sliding wear behaviour was evaluated at varying sliding distance at constant loads. Maximum flexural strength of 172 MPa and compressive strength of 324 MPa with improved hardness around HV 40.2 are obtained in composite with 10 wt.% ABOw. Further increase in ABOw content deteriorates the properties. A substantial increase in wear resistance is also observed with 10 wt.% ABOw. The excellent combination of mechanical properties of Al-10 wt.%ABOw composites is attributed to good interfacial bonds, less porosity and uniformity in the microstructure.
文摘Nanometer crystal samarium borate with a particle size of 20～40?nm was prepared using replacing solvent drying technique. The wear resistance and load carrying capacity of 500SN base oil could be improved and the friction coefficient could be decreased by the addition of nanometer samarium borate. But the dosage of samarium borate nanoparticles had to be controlled at a relatively low level, a higher concentration of nanoparticles was not of beneficial to the tribological performance of the oil. The optimal dosage of nanometer samarium borate is 1.0%. Tribochemical reactions took place in the tribological process, which resulted in the formation of deposition products including diboron trioxide and disamarium trioxide. Fe 2B and FeB were also found on the wear scar. The improvement of tribological properties of the oil comes from the formation of deposition layer and permeating layer. [
基金supported by the National Natural Science Foundation of China(51962019)the Natural Science Foundation of Gansu Province(20JR5RA469)+1 种基金the Education Department of Gansu Province:"Star of Innovation"Project for Outstanding Graduate Students(2021CXZX-455)the Lanzhou University of Technology Hongliu First-class Discipline Construction Program。
文摘Tris(trimethylsilyl)borate(TMSB) has been intensively studied to improve the performances of lithiumion batteries. However, it is still an interesting issue needed to be resolved for the research on the Li^(+) solvation structure affected by TMSB additive. Herein, the electrochemical tests, quantum chemistry calculations, potential-resolved in-situ electrochemical impedance spectroscopy measurements and surface analyses were used to explore the effects of Li^(+) solvation structure with TMSB additive on the formation of the cathode electrolyte interface(CEI) film in LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)/Li half cells. The results reveal that the TMSB additive is easy to complex with Li^(+) ion, thus weaken the intermolecular force between Li^(+) ions and ethylene carbonate solvent, which is benefit for the cycle performance. Besides, the changed Li^(+) solvation structure results in a thin and dense CEI film containing compounds with Si–O and B–O bonds which is favorable to the transfer of Li^(+) ions. As a result, the performances of the LNCM811/Li half cells are effectively improved. This research provides a new idea to construct a high-performance CEI film by adjusting the Li^(+) solvation structures.
文摘The complexation reaction between borate ions and phenol-formaldehyde resol resin in aqueous solution was studied by pH measurement, small model molecules and infrared spectroscopy. The results show that the complexation can proceed completely and rapidly at room temperature. Borate ion attacks phenol hydroxyl groups and adjacent position hydroxymethyl groups on the phenol ring of the resin, and forms the coordinate bond between boron atom in borate ion and oxygen atom in the hydroxyl groups. The complexation is a quantitative reaction. The complex is a six member ring containing two oxygens and one boron. The complexation can release hydrogen ions resulting in the decreasing pH in the resin solution.
基金Supported by the Talent Training Funds of Beijing (20051D0501501)the Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality, and the Natural Science Foundation of Beijing (No. 2073021)
文摘A novel ternary borate, sodium strontium pentaborate, NaSrB5O9, has been prepared by solid-state reaction below 800 ℃. The single-crystal X-ray structural analysis showed that NaSrB5O9 crystallizes in monoclinic, space group P21/c with a = 6.499（2）, b = 13.979（3）, c = 8.045（2）A, β = 106.92（2）°, V = 699.2（3）A^3, Z = 4, Mr = 308.66, Dc = 2.932 g/cm^3, μ = 7.804 mm^-1, F（000） = 584, R = 0.0264 and wR = 0.0621 for 2426 observed reflections and 146 variables. NaSrB5O9 is a layered compound containing double ring B5O11 building units composed of two BO4 tetrahedra and three BO3 triangles. Each B5O11 unit is connected to four other equivalent units through exocyclic oxygen atoms to form a two-dimensional ∞^2 [B5O9]^3- layer. Symmetry-center related layers are stacked along the b axis and held together by Na^＋ and Sr^2＋ cations via electrostatic interactions.
基金the resources of Poznań Supercomputing and Networking Centre, grant No. 175
文摘Terbium doped strontium-lanthanum borate, Sr3La2（BO3）4：Tb （SLB）, was studied by semi-empirical computational ap- proaches using PM6 parametrization and the SPARKLE model for lanthanide（Ⅲ） （Ln（Ⅲ）） cations. The focus of interest was on structural aspects, e.g. the cell parameters and distribution of dopant ions between various sites as a function of dopant concentration. The cell linear dimensions were calculated to decrease linearly with increasing dopant molar concentration. SLB offered two sites for the dopant. Calculations predicted that one of these sites should be preferred by the Tb（Ⅲ） dopant. The optimized cell dimensions as well as the total energies differed for structures with dopant exclusively in site 1 or site 2. Computational predictions were tested against experimental results obtained for SLB synthesized by sol-gel method varying the dopant concentration. The agreement be- tween experimental and computational results was found sufficiently promising to continue the computational studies.
文摘Dy^3＋-doped borate glasses （LBLB） with high effective visible fluorescence emission were synthesized. The absorption spectrum and fluorescence spectrum of this glass were measured and analyzed. By using J-O theory, the oscillator strengths for some absorption transitions were calculated according to the absorption spectra. The intensity parameters Ω1 （t = 2, 4, 6） of Dy^3＋ were determined by using a least-squares fitting approach, and the values are 4.04 × 10^-20, 1.30 × 10^-20 and 1.82 × 10^-20 cm, respectively. The root-mean-square deviation δrma was calculated. Under UV light excitation, Dy^3＋-doped borate glasses （LBLB） emit intense yellowish white lights. The excitation spectrum indicates that argon laser is the effective excitation source in Dy^3＋-doped LBLB glasses
文摘Copper coating was deposited on the surface of aluminum borate whisker by an electroless plating method.This method was used to modify the interfacial property of squeeze-casting aluminum borate whisker reinforced 6061Al matrix composite.Interface observation indicates that the spinel reaction(MgAl2O4) is hindered by the copper coating,and the difference in interfacial reaction degree affects the tensile property and aging behavior of the composite.For the composite with less spinel reaction(MgAl2O4),its peak-aging process are postponed due to less depletion of magnesium.On the fracture surface of copper-coated composite dimples and fractures of whiskers are more,but on the fracture surface of uncoated composite pull-out of whiskers are more than that on the coated one.In uncoated composite the fracture generally originates from the near-interface-region.
基金financial support provided by the Basic Science and Frontier Technology Research Project of Chongqing (CSTC, 2017jcyjAX0058)
文摘Tribological properties of 150SN mineral oil and lubricating oils containing triethanolamine borate(TBE)with and without electromagnetic field impact were evaluated on a modified four-ball tribo-tester.The characteristics of the worn surfaces were studied by scanning electronic microscopy(SEM),energy dispersive spectrometry(EDS)and X-ray photoelectron spectroscopy(XPS).Moreover,the tribological mechanisms are discussed from the viewpoint of physical effect and chemical effect.The results indicated that the friction coefficients and wear scar diameters(WSDs)lubricated by 150SN mineral oil under electromagnetic field were higher than those without electromagnetism impact.The WSDs of steel balls lubricated by TBE-doped oils under electromagnetic field were smaller than those obtained from non-electromagnetic field,but the friction coefficients were higher than those under non-electromagnetic field.A protective coating consists of wear particles could be formed on the frictional surface due to the physical effect of electromagnetic field on wear debris.The electromagnetic field could facilitate the interaction of elemental boron and nitrogen in TBE with metal interfaces,and contributes to forming tribo-chemical reaction film to reduce friction and wear.
