This study intends to examine the effects of different concentrations of four kinds of degradations of chitin： glucosamine （GLC）, N-acetyl-D-glucosamine （NAG）, chitooligosaccharide（COS）, CM-chitooligosaccharide...This study intends to examine the effects of different concentrations of four kinds of degradations of chitin： glucosamine （GLC）, N-acetyl-D-glucosamine （NAG）, chitooligosaccharide（COS）, CM-chitooligosaccharide （CM-COS）—on the proliferation of MC3T3-E1 cell line cultured in vitro. Results suggest that all of the glucoses mentioned above promoted the proliferation of osteoblast, and various concentrations have different effects： the proliferation was remarkable when the concentration of GLC, NAG, COS, CM-COS was 100 , 100, 500, 500 μg/mL ,respectively. Furthermore we choose the glucosamine as the material and study the effect on the bone strength in ovariectomized rats. The results showed that the middle does of glucosamine can significantly increase the hone strength of femur in ovariectomized rats.展开更多
AIM: To evaluate properties of bone quantity/quality using young non-obese Type 1(T1D)-diabetic(NOD) prone and syngenic non-diabetic(NOD.scid) mice.METHODS: Quantitative bone assessment of tibia was conducted using du...AIM: To evaluate properties of bone quantity/quality using young non-obese Type 1(T1D)-diabetic(NOD) prone and syngenic non-diabetic(NOD.scid) mice.METHODS: Quantitative bone assessment of tibia was conducted using dual-energy X-ray absorptiometry(DXA) for the evaluation of body mass,bone mineral content,body fat mass and lean mass.Qualitative assessment was accomplished by three-point breakage for assessment of force to failure and micro-computed tomography for evaluation of trabecular and cortical properties of bone.In addition,fasting blood was evaluated prior to sacrifice at week eleven and fifteen to evaluate and compare glucose homeostasis between the strains of mice.RESULTS: Our findings support a perturbation in the relationship between bone quantity,quality,and subsequently,the association between structure and strength.There were no differences in DXA-assessed body composition(body fat,% fat mass and lean mass) and bone composition(bone mineral content and bone mineral density) between strains.However,relative to NOD.scid,NOD mice had lower trabecular bone volume,relative trabecular bone volume,trabecular number and trabecular total material density(P < 0.05).Conversely,NOD mice had greater cortical total mean volume(P < 0.05).General linear models analysis adjusted for body weight revealed a significant contribution of T1D to bone health as early as 5 wk.CONCLUSION: It is well-established that diabetes is a significant risk factor for increased fractures,although the underlying mechanisms are not fully understood.Investigation of bone parameters encompassing strength and structure early in the life course will facilitate the elucidation of the pathogenesis of impaired bone integrity.展开更多
Pathologic fracture is caused by bone diseases,which is common in middle-aged and elderly adults.Compromised bone strength is the leading contributor to this type of fracture.Therefore,accurately quantifying bone stre...Pathologic fracture is caused by bone diseases,which is common in middle-aged and elderly adults.Compromised bone strength is the leading contributor to this type of fracture.Therefore,accurately quantifying bone strength could help clinicians assess individualized fracture risk and develop therapeutic interventions.Orthopedic clinical imaging including dual X-ray absorptiometry(DXA),computed tomography(CT),and magnetic resonance imaging(MRI)has been an important tool to obtain radiology images of bone,which could be further used for noninvasive assessment of bone strength and related fracture risk.With the development of biomechanics and computer technology,the combination of finite element analysis with orthopedic imaging is the most advanced method for noninvasive prediction of bone strength in clinics.In this review,an overview is provided for the commonly noninvasive methods based on the radiology images(i.e.,DXA,CT,and MRI)to predict bone strength,which may improve the understanding of the relationship between orthopedic clinical imaging and biomechanics.展开更多
To evaluate the long-term consequence of repetitive mild traumatic brain injury （mTBI） on bone, mTBI was induced in 10-week-old female C57BL/6J mice using a weight drop model, once per day for 4 consecutive days at ...To evaluate the long-term consequence of repetitive mild traumatic brain injury （mTBI） on bone, mTBI was induced in 10-week-old female C57BL/6J mice using a weight drop model, once per day for 4 consecutive days at different drop heights （0.5, 1 and 1.5 m） and the skeletal phenotype was evaluated at different time points after the impact. In vivo micro-CT （μ-CT） analysis of the tibial metaphysis at 2, 8 and 12 weeks after the impact revealed a 5%-32% reduction in trabecular bone mass. Histomorphometric analyses showed a reduced bone formation rate in the secondary spongiosa ofl.5 m impacted mice at 12 weeks post impact. Apparent modulus （bone strength）, was reduced by 30% （P 〈 0.05） at the proximal tibial metaphysis in the 1.5 m drop height group at 2 and 8 weeks post impact. Ex vivo μ-CT analysis of the fifth lumbar vertebra revealed a significant reduction in trabecular bone mass at 12 weeks of age in all three drop height groups. Serum levels of osteocalcin were decreased by 22%, 15%, and 19% in the 0.5, 1.0 and 1.5 m drop height groups, respectively, at 2 weeks post impact. Serum IGF-I levels were reduced by 18%-32% in mTBI mice compared to control mice at 2 weeks post impact. Serum osteocalcin and IGF-I levels correlated with trabecular BV/TV （r2 = 0.14 and 0.16, P 〈 0.05）. In conclusion, repetitive mTBI exerts significant negative effects on the trabecular bone microarchitecture and bone mechanical properties by influencing osteoblast function via reduced endocrine IGF-I actions.展开更多
Given that the liver is involved in many metabolic mechanisms,it is not surprising that chronic liver disease(CLD)could have numerous complications.Secondary osteoporosis and increased bone fragility are frequently ov...Given that the liver is involved in many metabolic mechanisms,it is not surprising that chronic liver disease(CLD)could have numerous complications.Secondary osteoporosis and increased bone fragility are frequently overlooked complications in CLD patients.Previous studies implied that up to one-third of these individuals meet diagnostic criteria for osteopenia or osteoporosis.Recent publications indicated that CLD-induced bone fragility depends on the etiology,duration,and stage of liver disease.Therefore,the increased fracture risk in CLD patients puts a severe socioeconomic burden on the health system and urgently requires more effective prevention,diagnosis,and treatment measures.The pathogenesis of CLD-induced bone loss is multifactorial and still insufficiently understood,especially considering the relative impact of increased bone resorption and reduced bone formation in these individuals.It is essential to note that inconsistent findings regarding bone mineral density measurement were previously reported in these individuals.Bone mineral density is widely used as the“golden standard”in the clinical assessment of bone fragility although it is not adequate to predict individual fracture risk.Therefore,microscale bone alterations(bone microstructure,mechanical properties,and cellular indices)were analyzed in CLD individuals.These studies further support the thesis that bone strength could be compromised in CLD individuals,implying that an individualized approach to fracture risk assessment and subsequent therapy is necessary for CLD patients.However,more well-designed studies are required to solve the bone fragility puzzle in CLD patients.展开更多
The objective of this study was to eval- uate the effects of inorganic phosphorus source and phytase addition on performance, nutrient digestibility and bone mineralization in broiler chickens. In Exp. 1,150 two-day o...The objective of this study was to eval- uate the effects of inorganic phosphorus source and phytase addition on performance, nutrient digestibility and bone mineralization in broiler chickens. In Exp. 1,150 two-day old, male broiler chicks were fed a corn-soybean meal basal diet supplemented with phos- phorus provided by dicalcium phosphate, tricalcium phosphate or defluorinated rock phosphate. Five cages containing 10 birds were allotted to each of the three treatments. In Exp. 2,120 three-day old, male broiler chicks were fed the basal diet from Exp. 1 supplemen- ted with 0,250,500 ,or 1,000 P-＇rU phytase per kg of diet. Six cages containing five chicks were allotted to each of the four treatments. In Exp. 1, there was no difference in weight gain, feed intake or feed conver- sion as a result of feeding the different sources of in- organic phosphorus. The digestibility of phosphorus was significantly lower （P =0.01 ） for chicks fed di- ets supplemented with tricalcium phosphate than for chicks fed the other two diets. However, despite the lower digestibility, serum phosphorus levels did not differ among the three treatments. For Exp. 2, feedconversion showed a linear improvement （P = 0.03 ） with increasing levels of phytase inclusion （ days 0 to 33 ）. Phytase supplementation resulted in linear increa- ses in the digestibility of dry matter （P = 0.02 ）, crude protein （ P --- 0.04 ） and energy （ P 〈 0.01 ）. Chicks fed 1,000 FTU/kg phytase had significantly higher bone calcium （ P = 0.05 ） and bone breaking strength （P = 0.04 ） than chicks fed the basal diet on day 33. In conclusion, the results of the current study indicated that the performance of birds fed diets sup- plemented with dicalcium phosphate, tricalcium phos- phate or defluorinated phosphate was similar and therefore production costs could be lowered by choo- sing the cheapest inorganic phosphorus source when formulating diets for poultry. When diets were formu- lated to meet dietary phosphorus requirements, the growth of broilers was not enhanced with phytase sup- plementation. However, increases in feed conversion and bone breaking strength and its potential to impact culling and mortality in broiler operations may be suf- ficient justification for the routine inclusion of phytase in diets fed to broilers.展开更多
Objective: To quantify the strength of the grafts from different body sites and determine the optimalselection of corticocancellous allografts for anterior interbody fusion. Methods: Complete sets of paired freshfroze...Objective: To quantify the strength of the grafts from different body sites and determine the optimalselection of corticocancellous allografts for anterior interbody fusion. Methods: Complete sets of paired freshfrozen femurs, humeri, tibias and iliac crests were obtained from 6 individual donors. One centimeter thick slicesstarting from the proximal and distal bone ends were cut from the non--diaphysial portions of the long bones usinga razor saw with a customized miter box. 2. 5 cm× 3. 0 cm × 1. 0 cm unicortical bone blocks were shaped similarlyfor clinical use as a lumbar interbody graft. Multiple 1 cm thick grafts with 1. 5 cm depth were obtained from theiliac crests, to simulate a cervical interbody graft. The left and right sides of each pair were randomized intoperpendicular and parallel cut groups in the long bones or tricortical and bicortical preparations of the iliac graft.The samples were tested on an MTS by applying a compressive load to failure. Results: The failure loads of distaltibia and femoral head grafts were significantly higher than distal femur, proximal tibia and burneral head grafts(PR0. 05). The strength of the grafts prepared by parallel cutting decreased significantly as compared with theperpendicular cutting (P <0. 05). No significant changes were seen in femoral and burneral head grafts for the 2sectioning orientations. The grafts closer to the anterior superior iliac spine had significant higher failure loads andfailure strengths than those closer to the posterior superior iliac spine. After trimming off the lateral cortex, themean strength of the bicortical grafts decreased significantly as compared with the tricortical grafts (P <0. 05).Conclusion: The grafts from femoral head and distal tibia by perpendicular cutting have higher failure load than theload bearing in lumbar spine. The grafts cut close to the anterior superior iliac spine are recommended for cervicalinterbody fusion.展开更多
[Objectives] To explore the flexural strength of 3D printed titanium bone bionic dental implants and provide a scientific basis for the clinical application of 3D printed porous bionic bone dental implants. [Methods] ...[Objectives] To explore the flexural strength of 3D printed titanium bone bionic dental implants and provide a scientific basis for the clinical application of 3D printed porous bionic bone dental implants. [Methods] The cone-beam CT( CBCT) image information of 20 premolars extracted by orthodontic requirement was collected,and a new porous bone bionic dental implant was produced using modeling software and 3D printer. The premolars were divided into two groups( A and B). The universal testing machine was used to test the flexural strength of the two groups and the difference in flexural strength between the two groups was compared through statistics. [Results]Twenty 3D printed porous titanium bone bionic implants were accurately produced; the morphology of group A and group B were extremely similar to each other; the average flexural strength of group A was 2 767. 92 N,while the average flexural strength of group B was 778. 77 N,showing that the average flexural strength of group A was significantly higher than that of group B,and the difference was statistically significant( P < 0. 05).[Conclusions]The personalized porous structure root implants produced by 3D printing technology are very similar to the target tooth morphology,and show high accuracy and small error of production. Besides,the flexural strength of 3D printed personalized porous structure root implants can fully meet the requirements of the maximum occlusal force for dental implant restoration. It is expected to provide a scientific basis for clinical application of 3 D printed porous bionic bone tooth implants.展开更多
Objective: To explore the correlation between muscle strength, muscle mass and bone mineral density (BMD) in Zhuang female population, body composition analysis and grip strength, and to analyze the possible influenci...Objective: To explore the correlation between muscle strength, muscle mass and bone mineral density (BMD) in Zhuang female population, body composition analysis and grip strength, and to analyze the possible influencing factors of BMD. Methods: 182 postmenopausal women were selected from Guangxi Province of China. Broadband ultrasound attenuation (BUA) was used to evaluate BMD. Grip dynamometer to assess muscle strength. Height, weight and muscle mass of each part were measured by body composition measuring instrument. Body mass index (BMI), skeletal muscle mass index (SMI) and limb skeletal muscle mass (SM) were calculated according to the measurement results. Results: BUA, grip strength and SMI in postmenopausal women of Zhuang nationality showed a decreasing trend with age (p p p r = 0.305, p Conclusion: With the increase of age, the decline rate of muscle strength of postmenopausal Zhuang women in Guangxi is slower than that of BMD and muscle mass. SM can better reflect the BMD level of the body than SMI, and the LSM is the main influencing factor of BMD.展开更多
Regenerative artificial bone material and bone parts were fabricated using vacuum-sintered bodies of a “titanium medical apatite (TMA?)” that is formed by chemically connecting Ti oxide molecules to the reactive [Ca...Regenerative artificial bone material and bone parts were fabricated using vacuum-sintered bodies of a “titanium medical apatite (TMA?)” that is formed by chemically connecting Ti oxide molecules to the reactive [Ca10 (PO4 )6 ] group of hydroxyapatite (HAp). Sintering at temperatures of 1273 - 1773 K caused this TMA sintered bodies to recrystallize and form a varying mix of α-TCP (tricalcium phosphate), β-TCP and Perovskite-CaTiO3 phases. The Perovskite crystals proved to be quite stable and hard, forming a uniform distribution of similarly sized fibers in all directions under vacuum sintering, but an irregular distribution and size when sintered in the presence of oxygen. Complete recrystallization was achieved by vacuum sintering at temperatures in excess of 1473 K. In particular, TMA vacuum-sintered bodies at 1573 K are given the maximum value;a Vickers hardness of 400, a bending strength of 43 MPa, a compressive strength of 270 MPa and a density of approximately 2300 kg/m3 was achieved that closely corresponds to that of compact bone or a tooth. As these TMA bodies could also be cut into various forms, they are considered a promising biomaterial for use as artificial bone in the regeneration of natural bone, or to provide reinforcement of bone junctions in dental and orthopedic surgery.展开更多
基金Supported by the Key Technologies Research andDevelopment Programof the Tenth five-year Plan of the Nation Scien-tific and Technological Development .(2001BA708B04-07)
文摘This study intends to examine the effects of different concentrations of four kinds of degradations of chitin： glucosamine （GLC）, N-acetyl-D-glucosamine （NAG）, chitooligosaccharide（COS）, CM-chitooligosaccharide （CM-COS）—on the proliferation of MC3T3-E1 cell line cultured in vitro. Results suggest that all of the glucoses mentioned above promoted the proliferation of osteoblast, and various concentrations have different effects： the proliferation was remarkable when the concentration of GLC, NAG, COS, CM-COS was 100 , 100, 500, 500 μg/mL ,respectively. Furthermore we choose the glucosamine as the material and study the effect on the bone strength in ovariectomized rats. The results showed that the middle does of glucosamine can significantly increase the hone strength of femur in ovariectomized rats.
基金Supported by R00DK083333(KC)T32DK007545(LJH)P60DK079626 UAB Diabetes Research Center Pilot/Feasibility Grant
文摘AIM: To evaluate properties of bone quantity/quality using young non-obese Type 1(T1D)-diabetic(NOD) prone and syngenic non-diabetic(NOD.scid) mice.METHODS: Quantitative bone assessment of tibia was conducted using dual-energy X-ray absorptiometry(DXA) for the evaluation of body mass,bone mineral content,body fat mass and lean mass.Qualitative assessment was accomplished by three-point breakage for assessment of force to failure and micro-computed tomography for evaluation of trabecular and cortical properties of bone.In addition,fasting blood was evaluated prior to sacrifice at week eleven and fifteen to evaluate and compare glucose homeostasis between the strains of mice.RESULTS: Our findings support a perturbation in the relationship between bone quantity,quality,and subsequently,the association between structure and strength.There were no differences in DXA-assessed body composition(body fat,% fat mass and lean mass) and bone composition(bone mineral content and bone mineral density) between strains.However,relative to NOD.scid,NOD mice had lower trabecular bone volume,relative trabecular bone volume,trabecular number and trabecular total material density(P < 0.05).Conversely,NOD mice had greater cortical total mean volume(P < 0.05).General linear models analysis adjusted for body weight revealed a significant contribution of T1D to bone health as early as 5 wk.CONCLUSION: It is well-established that diabetes is a significant risk factor for increased fractures,although the underlying mechanisms are not fully understood.Investigation of bone parameters encompassing strength and structure early in the life course will facilitate the elucidation of the pathogenesis of impaired bone integrity.
基金This work was supported by the National Natural Science Foundation of China(Nos.11872095,11702110)the Natural Science Foundation of Jilin Province(No.20200201260JC).
文摘Pathologic fracture is caused by bone diseases,which is common in middle-aged and elderly adults.Compromised bone strength is the leading contributor to this type of fracture.Therefore,accurately quantifying bone strength could help clinicians assess individualized fracture risk and develop therapeutic interventions.Orthopedic clinical imaging including dual X-ray absorptiometry(DXA),computed tomography(CT),and magnetic resonance imaging(MRI)has been an important tool to obtain radiology images of bone,which could be further used for noninvasive assessment of bone strength and related fracture risk.With the development of biomechanics and computer technology,the combination of finite element analysis with orthopedic imaging is the most advanced method for noninvasive prediction of bone strength in clinics.In this review,an overview is provided for the commonly noninvasive methods based on the radiology images(i.e.,DXA,CT,and MRI)to predict bone strength,which may improve the understanding of the relationship between orthopedic clinical imaging and biomechanics.
基金supported by funding from a Veterans Administration BLR&D merit review grant 1–101-BX-002717 to Dr Subburaman Mohan
文摘To evaluate the long-term consequence of repetitive mild traumatic brain injury （mTBI） on bone, mTBI was induced in 10-week-old female C57BL/6J mice using a weight drop model, once per day for 4 consecutive days at different drop heights （0.5, 1 and 1.5 m） and the skeletal phenotype was evaluated at different time points after the impact. In vivo micro-CT （μ-CT） analysis of the tibial metaphysis at 2, 8 and 12 weeks after the impact revealed a 5%-32% reduction in trabecular bone mass. Histomorphometric analyses showed a reduced bone formation rate in the secondary spongiosa ofl.5 m impacted mice at 12 weeks post impact. Apparent modulus （bone strength）, was reduced by 30% （P 〈 0.05） at the proximal tibial metaphysis in the 1.5 m drop height group at 2 and 8 weeks post impact. Ex vivo μ-CT analysis of the fifth lumbar vertebra revealed a significant reduction in trabecular bone mass at 12 weeks of age in all three drop height groups. Serum levels of osteocalcin were decreased by 22%, 15%, and 19% in the 0.5, 1.0 and 1.5 m drop height groups, respectively, at 2 weeks post impact. Serum IGF-I levels were reduced by 18%-32% in mTBI mice compared to control mice at 2 weeks post impact. Serum osteocalcin and IGF-I levels correlated with trabecular BV/TV （r2 = 0.14 and 0.16, P 〈 0.05）. In conclusion, repetitive mTBI exerts significant negative effects on the trabecular bone microarchitecture and bone mechanical properties by influencing osteoblast function via reduced endocrine IGF-I actions.
文摘Given that the liver is involved in many metabolic mechanisms,it is not surprising that chronic liver disease(CLD)could have numerous complications.Secondary osteoporosis and increased bone fragility are frequently overlooked complications in CLD patients.Previous studies implied that up to one-third of these individuals meet diagnostic criteria for osteopenia or osteoporosis.Recent publications indicated that CLD-induced bone fragility depends on the etiology,duration,and stage of liver disease.Therefore,the increased fracture risk in CLD patients puts a severe socioeconomic burden on the health system and urgently requires more effective prevention,diagnosis,and treatment measures.The pathogenesis of CLD-induced bone loss is multifactorial and still insufficiently understood,especially considering the relative impact of increased bone resorption and reduced bone formation in these individuals.It is essential to note that inconsistent findings regarding bone mineral density measurement were previously reported in these individuals.Bone mineral density is widely used as the“golden standard”in the clinical assessment of bone fragility although it is not adequate to predict individual fracture risk.Therefore,microscale bone alterations(bone microstructure,mechanical properties,and cellular indices)were analyzed in CLD individuals.These studies further support the thesis that bone strength could be compromised in CLD individuals,implying that an individualized approach to fracture risk assessment and subsequent therapy is necessary for CLD patients.However,more well-designed studies are required to solve the bone fragility puzzle in CLD patients.
文摘The objective of this study was to eval- uate the effects of inorganic phosphorus source and phytase addition on performance, nutrient digestibility and bone mineralization in broiler chickens. In Exp. 1,150 two-day old, male broiler chicks were fed a corn-soybean meal basal diet supplemented with phos- phorus provided by dicalcium phosphate, tricalcium phosphate or defluorinated rock phosphate. Five cages containing 10 birds were allotted to each of the three treatments. In Exp. 2,120 three-day old, male broiler chicks were fed the basal diet from Exp. 1 supplemen- ted with 0,250,500 ,or 1,000 P-＇rU phytase per kg of diet. Six cages containing five chicks were allotted to each of the four treatments. In Exp. 1, there was no difference in weight gain, feed intake or feed conver- sion as a result of feeding the different sources of in- organic phosphorus. The digestibility of phosphorus was significantly lower （P =0.01 ） for chicks fed di- ets supplemented with tricalcium phosphate than for chicks fed the other two diets. However, despite the lower digestibility, serum phosphorus levels did not differ among the three treatments. For Exp. 2, feedconversion showed a linear improvement （P = 0.03 ） with increasing levels of phytase inclusion （ days 0 to 33 ）. Phytase supplementation resulted in linear increa- ses in the digestibility of dry matter （P = 0.02 ）, crude protein （ P --- 0.04 ） and energy （ P 〈 0.01 ）. Chicks fed 1,000 FTU/kg phytase had significantly higher bone calcium （ P = 0.05 ） and bone breaking strength （P = 0.04 ） than chicks fed the basal diet on day 33. In conclusion, the results of the current study indicated that the performance of birds fed diets sup- plemented with dicalcium phosphate, tricalcium phos- phate or defluorinated phosphate was similar and therefore production costs could be lowered by choo- sing the cheapest inorganic phosphorus source when formulating diets for poultry. When diets were formu- lated to meet dietary phosphorus requirements, the growth of broilers was not enhanced with phytase sup- plementation. However, increases in feed conversion and bone breaking strength and its potential to impact culling and mortality in broiler operations may be suf- ficient justification for the routine inclusion of phytase in diets fed to broilers.
文摘Objective: To quantify the strength of the grafts from different body sites and determine the optimalselection of corticocancellous allografts for anterior interbody fusion. Methods: Complete sets of paired freshfrozen femurs, humeri, tibias and iliac crests were obtained from 6 individual donors. One centimeter thick slicesstarting from the proximal and distal bone ends were cut from the non--diaphysial portions of the long bones usinga razor saw with a customized miter box. 2. 5 cm× 3. 0 cm × 1. 0 cm unicortical bone blocks were shaped similarlyfor clinical use as a lumbar interbody graft. Multiple 1 cm thick grafts with 1. 5 cm depth were obtained from theiliac crests, to simulate a cervical interbody graft. The left and right sides of each pair were randomized intoperpendicular and parallel cut groups in the long bones or tricortical and bicortical preparations of the iliac graft.The samples were tested on an MTS by applying a compressive load to failure. Results: The failure loads of distaltibia and femoral head grafts were significantly higher than distal femur, proximal tibia and burneral head grafts(PR0. 05). The strength of the grafts prepared by parallel cutting decreased significantly as compared with theperpendicular cutting (P <0. 05). No significant changes were seen in femoral and burneral head grafts for the 2sectioning orientations. The grafts closer to the anterior superior iliac spine had significant higher failure loads andfailure strengths than those closer to the posterior superior iliac spine. After trimming off the lateral cortex, themean strength of the bicortical grafts decreased significantly as compared with the tricortical grafts (P <0. 05).Conclusion: The grafts from femoral head and distal tibia by perpendicular cutting have higher failure load than theload bearing in lumbar spine. The grafts cut close to the anterior superior iliac spine are recommended for cervicalinterbody fusion.
文摘[Objectives] To explore the flexural strength of 3D printed titanium bone bionic dental implants and provide a scientific basis for the clinical application of 3D printed porous bionic bone dental implants. [Methods] The cone-beam CT( CBCT) image information of 20 premolars extracted by orthodontic requirement was collected,and a new porous bone bionic dental implant was produced using modeling software and 3D printer. The premolars were divided into two groups( A and B). The universal testing machine was used to test the flexural strength of the two groups and the difference in flexural strength between the two groups was compared through statistics. [Results]Twenty 3D printed porous titanium bone bionic implants were accurately produced; the morphology of group A and group B were extremely similar to each other; the average flexural strength of group A was 2 767. 92 N,while the average flexural strength of group B was 778. 77 N,showing that the average flexural strength of group A was significantly higher than that of group B,and the difference was statistically significant( P < 0. 05).[Conclusions]The personalized porous structure root implants produced by 3D printing technology are very similar to the target tooth morphology,and show high accuracy and small error of production. Besides,the flexural strength of 3D printed personalized porous structure root implants can fully meet the requirements of the maximum occlusal force for dental implant restoration. It is expected to provide a scientific basis for clinical application of 3 D printed porous bionic bone tooth implants.
文摘Objective: To explore the correlation between muscle strength, muscle mass and bone mineral density (BMD) in Zhuang female population, body composition analysis and grip strength, and to analyze the possible influencing factors of BMD. Methods: 182 postmenopausal women were selected from Guangxi Province of China. Broadband ultrasound attenuation (BUA) was used to evaluate BMD. Grip dynamometer to assess muscle strength. Height, weight and muscle mass of each part were measured by body composition measuring instrument. Body mass index (BMI), skeletal muscle mass index (SMI) and limb skeletal muscle mass (SM) were calculated according to the measurement results. Results: BUA, grip strength and SMI in postmenopausal women of Zhuang nationality showed a decreasing trend with age (p p p r = 0.305, p Conclusion: With the increase of age, the decline rate of muscle strength of postmenopausal Zhuang women in Guangxi is slower than that of BMD and muscle mass. SM can better reflect the BMD level of the body than SMI, and the LSM is the main influencing factor of BMD.
文摘Regenerative artificial bone material and bone parts were fabricated using vacuum-sintered bodies of a “titanium medical apatite (TMA?)” that is formed by chemically connecting Ti oxide molecules to the reactive [Ca10 (PO4 )6 ] group of hydroxyapatite (HAp). Sintering at temperatures of 1273 - 1773 K caused this TMA sintered bodies to recrystallize and form a varying mix of α-TCP (tricalcium phosphate), β-TCP and Perovskite-CaTiO3 phases. The Perovskite crystals proved to be quite stable and hard, forming a uniform distribution of similarly sized fibers in all directions under vacuum sintering, but an irregular distribution and size when sintered in the presence of oxygen. Complete recrystallization was achieved by vacuum sintering at temperatures in excess of 1473 K. In particular, TMA vacuum-sintered bodies at 1573 K are given the maximum value;a Vickers hardness of 400, a bending strength of 43 MPa, a compressive strength of 270 MPa and a density of approximately 2300 kg/m3 was achieved that closely corresponds to that of compact bone or a tooth. As these TMA bodies could also be cut into various forms, they are considered a promising biomaterial for use as artificial bone in the regeneration of natural bone, or to provide reinforcement of bone junctions in dental and orthopedic surgery.
