The interlayer contact condition of asphalt pavement has a significant impact on stress transfer and energy dissipation with adjacent layers,so a model considering the bonding condition of adjacent layers is introduce...The interlayer contact condition of asphalt pavement has a significant impact on stress transfer and energy dissipation with adjacent layers,so a model considering the bonding condition of adjacent layers is introduced for evaluating the structural response of asphalt pavement.The pavement structure,the material characterization with temperature,the interlayer contact bonding model,the types of bond failure,and the prediction method of pavement life are described in detail.Results show that the transversely tensile strains at the top of asphalt pavement under the condition of high temperature were easy to cause the top-down cracking outside the edge of the dual tire.The bonding failure has a significant influence on strains at the bottom of the surface course with the condition of high temperature,especially,the longitudinally tensile strains would increase obviously as the disengaging area between the surface course of asphalt pavement and the base layer increases.Finally,it is proved that the surface course is vulnerable to form deformations and cause damage under the combined action of low speed and high temperature.展开更多
The generation mechanism of the first arrivals in the cased boreholes for the poorly bonded conditions is investigated. Based on the analyses of the Riemann surface structure of the characteristic function, the disper...The generation mechanism of the first arrivals in the cased boreholes for the poorly bonded conditions is investigated. Based on the analyses of the Riemann surface structure of the characteristic function, the dispersion features, excitation spectra and contributions of modes excited in the cased boreholes with different cementing types are studied. The phase velocity dispersion studies of leaky modes show that high-order modes form "plateau" regions with one approximate velocity denoted by v separated by their cutoff frequencies, in which the phase velocity changes little with a considerable frequency range, while the group velocity keeps a relatively constant high value. Usually, the operation frequency range of a specific cementing evaluation acoustic logging tool is covered by such a "plateau" region. Mode excitation and contribution analyses show that the first arrivals in the cased boreholes for the poorly bonded conditions are the contributions from leaky modes, where the traveling velocity of the first arrivals processed by slowness time coherence(STC) method is equal to the approximated velocity v. Analyses on generation of leaky modes in the cased boreholes supplement the understanding of the generation mechanism of the first arrivals.展开更多
Based on the wave equations in cylindrically layered structures and boundary conditions, the frequency equation for axisymmetric guided waves and the expression for sound fields in a cased borehole excited by a monop...Based on the wave equations in cylindrically layered structures and boundary conditions, the frequency equation for axisymmetric guided waves and the expression for sound fields in a cased borehole excited by a monopole or multipole source have been derived. The synthetic full waveforms excited by the monopole and dipole source are simulated using a real axis integration and FFT method. According to the axisymmetric guided wave modes, the synthetic full waveforms and the effects of the interface conditions on the sound field in a cased borehole have been analyzed and studied respectively. Numerical results indicate that it may be difficult to distinguish well bonded, poorly bonded or unbonded intermediate layer between the steel pipe and formation if only using a monopole source or dipole source. To properly estimate the case boundary conditions, a combination of monopole source logging with dipole source logging is suggested.展开更多
目的评价不同表面处理方法对激光预备牙本质形态学变化和黏结强度的影响。方法2013年5月至7月在中国医科大学附属口腔医院收集20～40岁新鲜拔除的活髓第三磨牙20颗及根尖发育完全的前磨牙8颗，铒、铬：钇钪镓石榴石（Er，Cr：YSGG）激...目的评价不同表面处理方法对激光预备牙本质形态学变化和黏结强度的影响。方法2013年5月至7月在中国医科大学附属口腔医院收集20～40岁新鲜拔除的活髓第三磨牙20颗及根尖发育完全的前磨牙8颗，铒、铬：钇钪镓石榴石（Er，Cr：YSGG）激光处理暴露的牙争面牙本质，然后按照不处理、37％磷酸酸蚀、自酸蚀及0．5mol／LEDTA调节各自分为4组，使用扫描电子显微镜（SEM）观察前磨牙牙本质处理面形态；第三磨牙使用Adper easy bond或Single bond 2黏结，Z350树脂逐层堆积树脂冠后，制作哑铃型试件进行微拉伸黏结强度测试，采用单因素方差分析进行组间差异比较。结果SEM观察发现：前磨牙激光预备后不处理组（对照组）牙面不规则，无玷污层，牙本质小管开放；磷酸酸蚀组牙本质表面最规则，自酸蚀组和EDTA处理组处理后表面变化不如磷酸酸蚀组明显。微拉仲黏结强度测试结果显示，第三磨牙分组后的3种处理方式牙本质黏结强度均显著高于对照组（P〈0．05），磷酸酸蚀组黏结强度最强（P〈0．05），而自酸蚀组及EDTA处理组差异无统计学意义（P〉0．05）。结论37％磷酸酸蚀、自酸蚀及0．5mol／LEDTA调节3种处理均可提高激光预备的牙本质黏结强度，37％磷酸酸蚀组获得最佳短期黏结效果。展开更多
基金supported by the Scientific Research Program Funded by Shaanxi Provincial Education Department(Program No.21JK0830)Shaanxi Provincial Natural Science Foundation Research Project(Program No.2022JM-166).
文摘The interlayer contact condition of asphalt pavement has a significant impact on stress transfer and energy dissipation with adjacent layers,so a model considering the bonding condition of adjacent layers is introduced for evaluating the structural response of asphalt pavement.The pavement structure,the material characterization with temperature,the interlayer contact bonding model,the types of bond failure,and the prediction method of pavement life are described in detail.Results show that the transversely tensile strains at the top of asphalt pavement under the condition of high temperature were easy to cause the top-down cracking outside the edge of the dual tire.The bonding failure has a significant influence on strains at the bottom of the surface course with the condition of high temperature,especially,the longitudinally tensile strains would increase obviously as the disengaging area between the surface course of asphalt pavement and the base layer increases.Finally,it is proved that the surface course is vulnerable to form deformations and cause damage under the combined action of low speed and high temperature.
基金the National Natural Science Foundation of China(Grant Nos.11134011 and 41274134)
文摘The generation mechanism of the first arrivals in the cased boreholes for the poorly bonded conditions is investigated. Based on the analyses of the Riemann surface structure of the characteristic function, the dispersion features, excitation spectra and contributions of modes excited in the cased boreholes with different cementing types are studied. The phase velocity dispersion studies of leaky modes show that high-order modes form "plateau" regions with one approximate velocity denoted by v separated by their cutoff frequencies, in which the phase velocity changes little with a considerable frequency range, while the group velocity keeps a relatively constant high value. Usually, the operation frequency range of a specific cementing evaluation acoustic logging tool is covered by such a "plateau" region. Mode excitation and contribution analyses show that the first arrivals in the cased boreholes for the poorly bonded conditions are the contributions from leaky modes, where the traveling velocity of the first arrivals processed by slowness time coherence(STC) method is equal to the approximated velocity v. Analyses on generation of leaky modes in the cased boreholes supplement the understanding of the generation mechanism of the first arrivals.
基金The project is supported by the National Natural Science Foundation of China and Natural ScienceFoundation of Jiangsu Province
文摘Based on the wave equations in cylindrically layered structures and boundary conditions, the frequency equation for axisymmetric guided waves and the expression for sound fields in a cased borehole excited by a monopole or multipole source have been derived. The synthetic full waveforms excited by the monopole and dipole source are simulated using a real axis integration and FFT method. According to the axisymmetric guided wave modes, the synthetic full waveforms and the effects of the interface conditions on the sound field in a cased borehole have been analyzed and studied respectively. Numerical results indicate that it may be difficult to distinguish well bonded, poorly bonded or unbonded intermediate layer between the steel pipe and formation if only using a monopole source or dipole source. To properly estimate the case boundary conditions, a combination of monopole source logging with dipole source logging is suggested.
文摘目的评价不同表面处理方法对激光预备牙本质形态学变化和黏结强度的影响。方法2013年5月至7月在中国医科大学附属口腔医院收集20～40岁新鲜拔除的活髓第三磨牙20颗及根尖发育完全的前磨牙8颗，铒、铬：钇钪镓石榴石（Er，Cr：YSGG）激光处理暴露的牙争面牙本质，然后按照不处理、37％磷酸酸蚀、自酸蚀及0．5mol／LEDTA调节各自分为4组，使用扫描电子显微镜（SEM）观察前磨牙牙本质处理面形态；第三磨牙使用Adper easy bond或Single bond 2黏结，Z350树脂逐层堆积树脂冠后，制作哑铃型试件进行微拉伸黏结强度测试，采用单因素方差分析进行组间差异比较。结果SEM观察发现：前磨牙激光预备后不处理组（对照组）牙面不规则，无玷污层，牙本质小管开放；磷酸酸蚀组牙本质表面最规则，自酸蚀组和EDTA处理组处理后表面变化不如磷酸酸蚀组明显。微拉仲黏结强度测试结果显示，第三磨牙分组后的3种处理方式牙本质黏结强度均显著高于对照组（P〈0．05），磷酸酸蚀组黏结强度最强（P〈0．05），而自酸蚀组及EDTA处理组差异无统计学意义（P〉0．05）。结论37％磷酸酸蚀、自酸蚀及0．5mol／LEDTA调节3种处理均可提高激光预备的牙本质黏结强度，37％磷酸酸蚀组获得最佳短期黏结效果。
