The failure and collapse of coal pillar ribs represent a significant hazard in the mining industry,with the associated risk of fatalities and injuries anticipated to rise as mining operations advance to greater depths...The failure and collapse of coal pillar ribs represent a significant hazard in the mining industry,with the associated risk of fatalities and injuries anticipated to rise as mining operations advance to greater depths.The development of support guidelines through an enhanced understanding of pillar damage and rock–support interaction mechanisms is crucial to resolving this issue.Bonded block models(BBMs)represent a convenient tool for this purpose,as they can reasonably reproduce the rock fracturing process;however,it is not known to what extent this modeling technique can be applied to simulate pillar failure mechanisms and support interaction in anisotropic rock masses,such as coal.To bridge this gap in research,hypothetical coal pillar BBMs of different width-to-height ratios were developed and calibrated to match Mark–Bieniawski's pillar strength equation,along with a few other attributes from the literature(stress levels at the edge of pillars and the transition from brittle to strain-hardening behavior with increasing width-to-height ratio).Elongated blocks were employed to capture the anisotropic behavior of coal mass.With the reliability of the model established,a few different support patterns were evaluated to ensure that the outputs are broadly consistent with expectations.Finally,simulations of roadway development and additional mining activities were completed considering geo-mining conditions representative of underground coal mines in the USA.The good consistency between model response and expected behaviors per field observation demonstrates the potential of BBMs to be used as a support design tool.展开更多
Dear Editor,The latest Visian implantable collamer lens(ICL)with a central port design(Aquaport;model V4c)obviates the necessity for preoperative laser iridotomy or intraoperative iridectomy by allowing the free flow ...Dear Editor,The latest Visian implantable collamer lens(ICL)with a central port design(Aquaport;model V4c)obviates the necessity for preoperative laser iridotomy or intraoperative iridectomy by allowing the free flow of the aqueous humor between the sides of the intraocular lens.The design of Aquaport can also eliminate the complications associated with iridotomy and iridectomy.Therefore,the V4c ICL has the potential to significantly reduce the risk of pupillary block compared to its predecessors.展开更多
Nanoscale drug delivery systems(nano-DDSs)have attracted intense interest in tumor chemotherapy in the last decades,to improve antitumor efficacy and minimize toxic and side effects.As a versatile supramolecular build...Nanoscale drug delivery systems(nano-DDSs)have attracted intense interest in tumor chemotherapy in the last decades,to improve antitumor efficacy and minimize toxic and side effects.As a versatile supramolecular building block,cyclodextrins(CDs)have been widely used in the fabrication of the smart nano-DDSs.Besides their multifunctionality,which makes them versatile core in the star(co)polymers for micellar nanomedicines,specific host-vip inclusion complexation via their hydrophobic cavities endows them diversified functions:(i)design of amphiphilic copolymers for micellar nanomedicines,(ii)supramolecular hydrogels and poly(pseudo)rotaxane nano-hydrogels as drug carriers,and(iii)recipient for direct and indirect drug-loading.In the present work,the recent progress of CDs in nano-DDSs for tumor chemotherapy was reviewed,classified by the crucial roles of CD units.Based on the structureperformance relationship,the future perspective was also proposed.展开更多
Dear Editor,In this case,we discuss a teenager who experienced severe eye pain and elevated intraocular pressure(IOP)caused by reverse pupillary block,which was successfully resolved using Neodymium-doped yttrium alum...Dear Editor,In this case,we discuss a teenager who experienced severe eye pain and elevated intraocular pressure(IOP)caused by reverse pupillary block,which was successfully resolved using Neodymium-doped yttrium aluminum garnet(Nd:YAG)laser peripheral iridotomy(LPI).展开更多
In this paper,we present a necessary and sufficient condition for hyponormal block Toeplitz operators T on the vector-valued weighted Bergman space with symbolsΦ(z)=G^(*)(z)+F(z),where F(z)=∑^(N)_(i)=1 A_(i)z^(i)and...In this paper,we present a necessary and sufficient condition for hyponormal block Toeplitz operators T on the vector-valued weighted Bergman space with symbolsΦ(z)=G^(*)(z)+F(z),where F(z)=∑^(N)_(i)=1 A_(i)z^(i)and G(z)=∑^(N)_(i)=1 A_(−i)z^(i),A_(i)ae culants.展开更多
AlGaN-based deep-ultraviolet(DUV)laser diodes(LDs)face performance challenges due to elec-tron leakage and poor hole injection which is often worsened by polarization effects from conventional elec-tron blocking layer...AlGaN-based deep-ultraviolet(DUV)laser diodes(LDs)face performance challenges due to elec-tron leakage and poor hole injection which is often worsened by polarization effects from conventional elec-tron blocking layers(EBLs).To overcome these limitations,we propose an EBL-free DUV LD design incor-porating a 1-nm undoped Al_(0.8)Ga_(0.2)N thin strip layer after the last quantum barrier.Using PICS3D simula-tions,we evaluate the optical and electrical characteristics.Results show a significant increase in effective electron barrier height(from 158.2 meV to 420.7 meV)and a reduction in hole barrier height(from 149.2 meV to 62.8 meV),which enhance hole injection and reduce electron leakage.The optimized structure(LD3)achieves a 14%increase in output power,improved slope efficiency(1.85 W/A),and lower threshold current.This design also reduces the quantum confined Stark effect and forms dual hole accumulation regions,im-proving recombination efficiency.展开更多
When patients initially present with atrial fibrillation along with an enlarged heart and heart failure, followed by atrioventricular block, it's essential to consider genetic factors.^([1])Genetic testing can off...When patients initially present with atrial fibrillation along with an enlarged heart and heart failure, followed by atrioventricular block, it's essential to consider genetic factors.^([1])Genetic testing can offer crucial diagnostic evidence, aiding in prognosis assessment and the adoption of appropriate treatment strategies.展开更多
Nanoporous polymers are extensively coated on various substrates to deliver optical,permselective,or other functions.However,it remains desired to fast produce uniform nanoporous polymer coatings on substrates with co...Nanoporous polymers are extensively coated on various substrates to deliver optical,permselective,or other functions.However,it remains desired to fast produce uniform nanoporous polymer coatings on substrates with complex surfaces.Herein,by manipulating the interactions between block copolymers and selective solvents,we prepare repairable nanoporous polymers on arbitrary substrates.This is realized by an extremely simple sequential coating process:sequential coating of block copolymers and their swelling agents on substrate surfaces.The swelling agents are comprised of two solvents that swell the constituent blocks of the copolymers to different degrees,rapidly producing polymer coatings with uniform,interconnected,sub-50 nm pores.This sequential coating process is able to conformally build nanoporous polymers on nonplanar substrates with large lateral sizes and complex surface features,and also to in situ repair defects arising during usages.We further demonstrate that the nanoporous coatings show excellent antireflective and membrane separation performances.This sequential coating process is dictated by polymer–solvent interactions,and is expected to find applications in diverse fields for its simplicity,adaptability,and the capability to produce well-defined nanoporosities.展开更多
The diagnostic efficacy of contemporary bioimaging technologies remains constrained by inherent limitations of conventional imaging agents,including suboptimal sensitivity,off-target biodistribution,and inherent cytot...The diagnostic efficacy of contemporary bioimaging technologies remains constrained by inherent limitations of conventional imaging agents,including suboptimal sensitivity,off-target biodistribution,and inherent cytotoxicity.These limitations have catalyzed the development of intelligent stimuli-responsive block copolymers-based bioimaging agents,which was engineered to dynamically respond to endogenous biochemical cues(e.g.,p H gradients,redox potential,enzyme activity,hypoxia environment) or exogenous physical triggers(e.g.,photoirradiation,thermal gradients,ultrasound(US)/magnetic stimuli).Through spatiotemporally controlled structural transformations,stimuli-responsive block copolymers enable precise contrast targeting,activatable signal amplification,and theranostic integration,thereby substantially enhancing signal-to-noise ratios of bioimaging and diagnostic specificity.Hence,this mini-review systematically examines molecular engineering principles for designing p H-,redox-,enzyme-,light-,thermo-,and US/magnetic-responsive polymers,with emphasis on structure-property relationships governing imaging performance modulation.Furthermore,we critically analyze emerging strategies for optical imaging,US synergies,and magnetic resonance imaging(MRI).Multimodal bioimaging has also been elaborated,which could overcome the inherent trade-offs between resolution,penetration depth,and functional specificity in single-modal approaches.By elucidating mechanistic insights and translational challenges,this mini-review aims to establish a design framework of stimuli-responsive block copolymersbased for high fidelity bioimaging agents and accelerate their clinical translation in precise diagnosis and therapy.展开更多
目的利用螺旋断层放射治疗(TOMO)计划系统制定乳腺癌保乳术后放射治疗计划,比较Block不同设计方法和径照功能对靶区和危及器官(OAR)剂量的影响。方法选择2024年2月至2025年2月宁波明州医院左侧乳腺癌保乳术后放射治疗女性患者15例,年龄3...目的利用螺旋断层放射治疗(TOMO)计划系统制定乳腺癌保乳术后放射治疗计划,比较Block不同设计方法和径照功能对靶区和危及器官(OAR)剂量的影响。方法选择2024年2月至2025年2月宁波明州医院左侧乳腺癌保乳术后放射治疗女性患者15例,年龄34~66岁,平均年龄52岁;经病理明确诊断为左侧乳腺癌,其中病理分期TNMⅠ期4例,TNMⅡ期11例。基于TOMO计划系统为每例患者制定3种TOMO计划,第一种计划设计过程中应用了半挡Direction Block(DB)模式,第二种计划应用全挡Complete Block(CB)模式,第三种应用螺旋断层径照射(TD)模式制作计划;比较3种计划的剂量参数,包括靶区的适形度指数(HI)、均匀度指数(CI)、平均剂量、最大剂量;肺、心脏、健侧乳腺及脊髓等OAR剂量差异。结果在靶区剂量方面,DB组和CB组均具有较优异的均匀性和适形性,对比TD组计划差异有统计学意义(CI:0.861±0.041 vs 0.741±0.047、0.871±0.041 vs 0.741±0.047;HI:1.036±0.006 vs 1.052±0.007、1.037±0.004 vs 1.052±0.007)(P<0.05);OAR剂量方面,CB组计划的左肺V_(5)、V_(20)、D_(mean)和心脏V_(10)、V_(20)、D_(mean)均明显优于其他两组,差异均有统计学意义(P<0.05)。比较脊髓的最大剂量(D_(max)),CB组和TD组相对DB组较低,差异有统计学意义[(1.47±1.48)Gy vs(8.66±2.89)Gy、(0.46±0.13)Gy vs(8.66±2.89)Gy](P<0.05)。TD组计划的右肺V_(5),右侧乳腺平均剂量优于DB、CB两组,差异均有统计学意义[V_(5):(0.36±0.48)%vs(17.32±3.47)%、(0.36±0.48)%vs(10.66±4.10)%;右侧乳腺平均剂量:(1.53±0.88)Gy vs(6.79±1.41)Gy、(1.53±0.88)Gy vs(4.89±0.99)Gy](P<0.05)。但TD组心脏V_(10)、V_(10)较DB组、CB组计划高[V_(10):(12.39±4.39)%vs(9.72±5.03)%、(12.39±4.39)%vs(5.09±1.13)%;V_(10):(6.68±4.17)%vs(2.35±1.38)%、(6.68±4.17)%vs(1.47±0.78)%]。时间方面,CB组治疗时间最长,与DB组、TD组差异均有统计学意义[(15.18±2.31)min vs(9.68±1.43)min、(15.18±2.31)min vs(9.88±3.15)min](P<0.05)。结论针对左侧乳腺癌的3种计划比较,DB相对无明显优势,CB的优势表现在能明显降低患侧肺和心脏、脊髓的受量,TD则对保护对侧肺、乳腺能起更好的效果,但CB治疗时间较长,TD靶区适形性均匀性较差,可根据患者实际情况选择计划方式。展开更多
Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford prod...Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford products with fixed sequences and compositions.Herein,we report the triethylborane/1,8-diazabicyclo[5.4.0]undec-7-ene(Et_3B/DBU)pair-mediated four-component switchable polymerization of propylene oxide(PO),CO_(2),phthalic anhydride(PA),and racemic lactide(rac-LA),which enables the on-demand synthesis of four different block copolymers,i.e.,poly(propylene phthalate)-b-polylactide(PPE-b-PLA),PPE-b-PLA-b-poly(propylene carbonate)(PPC),PPE-b-PPC-b-PLA,and PPE-b-PPCb-poly(propylene oxide)(PPO),through rationally modulating the Lewis pair(LP)ratio.Core to this protocol is that increasing the loading of Et_(3)B accelerates the ring-opening of PO while impeding the reactivity of rac-LA,thus allowing for fine-tuning of the thermodynamic and kinetic of the switchable polymerization.Therefore,the four polymerization cycles involving PO/PA ring-opening copolymerization(ROCOP),PO/CO_(2) ROCOP,rac-LA ring-opening polymerization(ROP),and PO ROP can be connected and discriminated in precisely programmed manners.展开更多
In mixture experiments,the observed response is determined by the relative proportions of the components,consequently rendering the experimental region a simplex.This paper focuses primarily on the optimal designs of ...In mixture experiments,the observed response is determined by the relative proportions of the components,consequently rendering the experimental region a simplex.This paper focuses primarily on the optimal designs of mixture experiments that involve process variables.Prior research has extensively delved into optimal orthogonal block designs for some classic mixture models with process variables.Based on the framework of general blending models,this paper proposes a class of symmetric linear mixture models,which can be regarded as a generalization of many existing ones.Under the orthogonal blocking conditions,orthogonal block designs are devised through Latin squares in the presence of process variables.TheD-,A-,and E-optimality criteria are utilized to obtain optimal designs at the boundary of the simplex in the case of 3 components.As the values of the exponents change,numerically derived optimal design points are presented to illustrate the pattern of their variations,and to verify the consistency of the results with previous research on some specific symmetric general blending models.展开更多
Aiming at the problem of potential information noise introduced during the generation of ghost feature maps in GhostNet,this paper proposes a novel lightweight neural network model called ResghostNet.This model constr...Aiming at the problem of potential information noise introduced during the generation of ghost feature maps in GhostNet,this paper proposes a novel lightweight neural network model called ResghostNet.This model constructs the Resghost Module by combining residual connections and Adaptive-SE Blocks,which enhances the quality of generated feature maps through direct propagation of original input information and selection of important channels before cheap operations.Specifically,ResghostNet introduces residual connections on the basis of the Ghost Module to optimize the information flow,and designs a weight self-attention mechanism combined with SE blocks to enhance feature expression capabilities in cheap operations.Experimental results on the ImageNet dataset show that,compared to GhostNet,ResghostNet achieves higher accuracy while reducing the number of parameters by 52%.Although the computational complexity increases,by optimizing the usage strategy of GPU cachememory,themodel’s inference speed becomes faster.The ResghostNet is optimized in terms of classification accuracy and the number of model parameters,and shows great potential in edge computing devices.展开更多
This paper presents a novel artificial intelligence(AI)-assisted two-stage method for optimising rock slope stability by integrating advanced 3D modelling with rock support design,aiming at minimising risks,material u...This paper presents a novel artificial intelligence(AI)-assisted two-stage method for optimising rock slope stability by integrating advanced 3D modelling with rock support design,aiming at minimising risks,material usage,and costs.In the first stage,an extended key block analysis identifies key blocks and key block groups,accounting for progressive failure and force interactions.The second stage uses AI algorithms to optimise rockbolting design,balancing stability,cost,and material use.The most efficient algorithms include the multi-objective tree-structured Parzen estimator(MOTPE)and non-dominated sorting genetic algorithms(NSGA-II and NSGA-III).Applied to the Larvik rock slope,the optimised solution uses 18 pre-tensioned cablebolts,providing 13.2 MN of active force and achieving a factor of safety of 1.31 while reducing the average anchorage length by approximately 16%compared to traditional design.The AI-assisted approach also reduces computation time by over 90%compared to Quasi-Monte Carlo(QMC)methods,demonstrating its efficiency for small-scale civil engineering projects and large-scale mining operations.The developed tool is practical,compatible with Building Information Modelling(BIM),and ready for engineering implementation,supporting sustainable and cost-effective rock slope stabilisation.While the method is largely automated,professional judgement remains crucial for verifying ground conditions and selecting the final solution.Future work will focus on integrating data uncertainties,addressing complex block deformation mechanisms,refining optimisation objectives,and improving the performance of multi-objective optimisation for slope rockboling applications to further enhance the method's versatility.展开更多
WiFi-based human activity recognition(HAR)provides a non-intrusive approach for ubiquitous monitoring;however,achieving both high accuracy and robustness simultaneously remains a significant challenge.This paper propo...WiFi-based human activity recognition(HAR)provides a non-intrusive approach for ubiquitous monitoring;however,achieving both high accuracy and robustness simultaneously remains a significant challenge.This paper proposes a Convolutional Neural Network with Enhanced Convolutional Block Attention Module(CNN-ECBAM)framework.The approach systematically converts raw Channel State Information(CSI)into pseudo-color images,effectively preserving essential signal characteristics for deep neural network processing.The core innovation is an Enhanced Convolutional Block Attention Module(ECBAM),tailored to CSI data characteristics,which integrates Efficient Channel Attention(ECA)and Multi-Scale Spatial Attention(MSSA).By employing learnable adaptive fusion weights,it achieves dynamic synergy between channel and spatial features,enabling the network to capture highly discriminative spatiotemporal patterns.The ECBAM module is integrated into a unified Convolutional Neural Network(CNN)to form the overall CNN-ECBAM model.Experimental results on the UT-HAR and NTU-Fi_HAR datasets demonstrate that CNN-ECBAM achieves competitive performance in recognition accuracy and outperforms mainstream baseline models.Specifically,it attains 99.20%accuracy on UT-HAR(surpassing ResNet-18 at 98.60%)and achieves 100%accuracy on NTU-Fi_HAR(exceeding GAF-CNN at 99.62%).These results validate the effectiveness of the proposed method for high-precision and reliable WiFi-based HAR.展开更多
Waste graphitization cathode carbon blocks are a type of hazardous solid waste generated during the aluminum electrolysis process,and their proper disposal is a key step in the resource utilization of discarded graphi...Waste graphitization cathode carbon blocks are a type of hazardous solid waste generated during the aluminum electrolysis process,and their proper disposal is a key step in the resource utilization of discarded graphite.This study utilizes the porous“defect advantage”of a cathode carbon block matrix to prepare silicon-doped and asphalt-coated detoxified and purified waste graphitization cathode carbon blocks for use as high-performance silicon/carbon composite anode materials.The results show that the uniformly silicondoped silicon/carbon composite material features a unique amorphous carbon-encapsulated“locked silicon”structure,which effectively addresses issues such as cathode volume expansion,excessive growth of the solid electrolyte interphase(SEI)film,and poor electrical contact between active materials.Consequently,electrochemical performance is enhanced.After assembly in a half-cell,the PSCC/10%Si@C(purified waste graphitization cathode carbon/10%Si@C)material exhibits optimal electrochemical stability,with an initial charging specific capacity of 514.5 mAh/g at 0.1 C(1 C=170 mA/g)and a capacity retention rate of 95.1%after 100 cycles.At a charge rate of 2.0 C,a specific capacity of 216.9 mAh/g is achieved.This technology provides a new pathway for the economical and high-value utilization of waste cathode carbon blocks and the development of low-cost,high-performance anode materials.展开更多
Star-shaped six-arm polymers with hexaaza[2_(6)]orthoparacyclophane core and arms of block copolymers of poly-2-ethyl-5,6-dihydrooxazine with poly-2-isopropyl-5,6-dihydrooxazine were synthesized successfully using cat...Star-shaped six-arm polymers with hexaaza[2_(6)]orthoparacyclophane core and arms of block copolymers of poly-2-ethyl-5,6-dihydrooxazine with poly-2-isopropyl-5,6-dihydrooxazine were synthesized successfully using cationic ring-opening polymerization.The ratio of blocks,the order of their attachment to the core,and arm length were varied.Conformation of synthesized stars was determined by methods of molecular hydrodynamics and optics.It has been shown that star-shaped molecules were characterized by high intramolecular density,and the arm folding increased with their lengthening.The influence of the structure of block copolymers and their molar mass on the critical micelle concentration has been established.Complexes of synthesized star-shaped block copolymers with curcumin were obtained and the efficient binding of curcumin to polymer molecules was demonstrated.The behavior of the aqueous solutions of the prepared polymer stars and their complexes with curcumin was investigated by light scattering and turbidimetry methods.The influence of the structure and molar mass of star polymers on their thermoresponsiveness and the phase separation temperatures in aqueous solutions was analyzed.A slight increase in the phase separation temperature was found on passage from polymer solutions to solutions of polymer complexes with hydrophobic curcumin.展开更多
Objective To observe the analgesic effect on herpes zoster treated by the comprehensive therapy of blocking, surrounding needling, pricking and cupping combined with bloodletting at Longyan （龙眼, Extra） acupoint. M...Objective To observe the analgesic effect on herpes zoster treated by the comprehensive therapy of blocking, surrounding needling, pricking and cupping combined with bloodletting at Longyan （龙眼, Extra） acupoint. Methods According to the random mumber table, 104 cases of herpes zoster were randomized into an observation group and a control group, 52 cases in each one. In the observation group, the blocking method was used at the starting site and the ending site of herpetic zone, the surrounding needling method was applied toward the center of the painful zone, with horizontal needling technique; and the local pricking and cupping methods as well as the bloodletting at Longyan （Extra） acupoint were adopted. In the control group, Jiáj （夹脊 EX-B 2） at the corresponding affected nerve segments and the local Ashi points were selected and stimulated with electroacupuncture. The visual analogue scale （VAS） was adopted to determine the analgesic effect 20 min, 1, 6, 12, 24 and 48 h after treatment separately in each group. Results The onset time of analgesic effect in the observation group was shorter than that in the control group and the efficacy time of duration was longer than that in the control group （all P0.05）. The analgesic effect and the result of comprehensive efficacy assessment were superior to those of the control group （both P0.05）. Conclusion The comprehensive therapy of blocking, surrounding needling, pricking and cupping method combined with bloodletting at Longyan （Extra） achieves the significant analgesic effect on herpes zoster.展开更多
Objective To explore the best therapeutic method in the treatment of peripheral facial paralysis. Methods One hundred and twenty cases were randomized into a conventional acupuncture group [Yangbai （阳白 GB 24）, Sib...Objective To explore the best therapeutic method in the treatment of peripheral facial paralysis. Methods One hundred and twenty cases were randomized into a conventional acupuncture group [Yangbai （阳白 GB 24）, Sibai （四白 ST 2）, Yingxiang （迎香 LI 20）, etc.], a Renying （人迎ST 9） acupuncture group and an operation ＋ acupuncture group [acupuncture at ST 9 as the main acupoint and the stellate ganglion block （SGB）], 40 cases in each one. The treatment was given once a day, 7 treatments made one session. After 3 sessions of treatment, the latency and the amplitude of the direct stimulation evoked potential of the facial nerve （ENoG） were compared before and after treatment in three groups, as well as R2 and R2 values of blink reflex （BR）. The total clinical efficacy was assessed. Results The latency of ENoG was shortened and the amplitude was increased significantly in three groups. After treatment, ENoG latency was lower significantly in the operation ＋ acupuncture group as compared with that in the conventional acupuncture group （P〈0.05）. In the Renying （人迎 ST 9） acupuncture group, the amplitude of ENoG was increased as compared with P〈0.05）. After treatment in three groups, those in the other two groups （all R2 and R2 values were decreased significantly. The differences in R1 and R2 values in the Renying （人迎 ST 9） acupuncture group and the operation ＋ acupuncture group before and after treatment were bigger than those in the conventional acupuncture group （all P〈0.05）, and the difference in R2 value in the operation ＋ acupuncture group was bigger than that in the Renying （人迎 ST 9） acupuncture group （P〈O.05）. The clinical markedly effective and curative rate was 87.5% （35/40） in the operation ＋ acupuncture group, which was superior to 77.5% （32/40） in the Renying （）人迎 ST 9）acupuncture group and higher significantly than 65.0% （26/40） in the conventional acupuncture group （P〈0.05）. Conclusion Compared with the conventional acupuncture, the efficacy on peripheral facial paralysis is much better in the Renying （人迎 ST 9） acupuncture group and the operation ＋ acupuncture group. Moreover, the early reflex function of the damaged facial nerve is much better recovered in the operation ＋ acupuncture group as compared with that in the Renying （人迎 ST 9） acupuncture group.展开更多
Let N be the Lie algebra of all n x n dominant block upper triangular matrices over a field F. In this paper, we explicitly describe all Lie triple derivations of N when char（F） ≠ 2. As an application, we character...Let N be the Lie algebra of all n x n dominant block upper triangular matrices over a field F. In this paper, we explicitly describe all Lie triple derivations of N when char（F） ≠ 2. As an application, we characterize Lie derivations of N when char（F） ≠ 2.展开更多
基金sponsored by the Alpha Foundation for the Improvement of Mine Safety and Health,Inc.(ALPHA FOUNDATION).
文摘The failure and collapse of coal pillar ribs represent a significant hazard in the mining industry,with the associated risk of fatalities and injuries anticipated to rise as mining operations advance to greater depths.The development of support guidelines through an enhanced understanding of pillar damage and rock–support interaction mechanisms is crucial to resolving this issue.Bonded block models(BBMs)represent a convenient tool for this purpose,as they can reasonably reproduce the rock fracturing process;however,it is not known to what extent this modeling technique can be applied to simulate pillar failure mechanisms and support interaction in anisotropic rock masses,such as coal.To bridge this gap in research,hypothetical coal pillar BBMs of different width-to-height ratios were developed and calibrated to match Mark–Bieniawski's pillar strength equation,along with a few other attributes from the literature(stress levels at the edge of pillars and the transition from brittle to strain-hardening behavior with increasing width-to-height ratio).Elongated blocks were employed to capture the anisotropic behavior of coal mass.With the reliability of the model established,a few different support patterns were evaluated to ensure that the outputs are broadly consistent with expectations.Finally,simulations of roadway development and additional mining activities were completed considering geo-mining conditions representative of underground coal mines in the USA.The good consistency between model response and expected behaviors per field observation demonstrates the potential of BBMs to be used as a support design tool.
基金Supported by the National Key Research and Development Program(No.2019YFC1710200)the Shandong Province Pharmaceutical Technology Development Project(No.202107020970).
文摘Dear Editor,The latest Visian implantable collamer lens(ICL)with a central port design(Aquaport;model V4c)obviates the necessity for preoperative laser iridotomy or intraoperative iridectomy by allowing the free flow of the aqueous humor between the sides of the intraocular lens.The design of Aquaport can also eliminate the complications associated with iridotomy and iridectomy.Therefore,the V4c ICL has the potential to significantly reduce the risk of pupillary block compared to its predecessors.
文摘Nanoscale drug delivery systems(nano-DDSs)have attracted intense interest in tumor chemotherapy in the last decades,to improve antitumor efficacy and minimize toxic and side effects.As a versatile supramolecular building block,cyclodextrins(CDs)have been widely used in the fabrication of the smart nano-DDSs.Besides their multifunctionality,which makes them versatile core in the star(co)polymers for micellar nanomedicines,specific host-vip inclusion complexation via their hydrophobic cavities endows them diversified functions:(i)design of amphiphilic copolymers for micellar nanomedicines,(ii)supramolecular hydrogels and poly(pseudo)rotaxane nano-hydrogels as drug carriers,and(iii)recipient for direct and indirect drug-loading.In the present work,the recent progress of CDs in nano-DDSs for tumor chemotherapy was reviewed,classified by the crucial roles of CD units.Based on the structureperformance relationship,the future perspective was also proposed.
文摘Dear Editor,In this case,we discuss a teenager who experienced severe eye pain and elevated intraocular pressure(IOP)caused by reverse pupillary block,which was successfully resolved using Neodymium-doped yttrium aluminum garnet(Nd:YAG)laser peripheral iridotomy(LPI).
文摘In this paper,we present a necessary and sufficient condition for hyponormal block Toeplitz operators T on the vector-valued weighted Bergman space with symbolsΦ(z)=G^(*)(z)+F(z),where F(z)=∑^(N)_(i)=1 A_(i)z^(i)and G(z)=∑^(N)_(i)=1 A_(−i)z^(i),A_(i)ae culants.
文摘AlGaN-based deep-ultraviolet(DUV)laser diodes(LDs)face performance challenges due to elec-tron leakage and poor hole injection which is often worsened by polarization effects from conventional elec-tron blocking layers(EBLs).To overcome these limitations,we propose an EBL-free DUV LD design incor-porating a 1-nm undoped Al_(0.8)Ga_(0.2)N thin strip layer after the last quantum barrier.Using PICS3D simula-tions,we evaluate the optical and electrical characteristics.Results show a significant increase in effective electron barrier height(from 158.2 meV to 420.7 meV)and a reduction in hole barrier height(from 149.2 meV to 62.8 meV),which enhance hole injection and reduce electron leakage.The optimized structure(LD3)achieves a 14%increase in output power,improved slope efficiency(1.85 W/A),and lower threshold current.This design also reduces the quantum confined Stark effect and forms dual hole accumulation regions,im-proving recombination efficiency.
基金Military Healthcare Special Scientific Research Project(25BJZ31, awarded to SHI XM)。
文摘When patients initially present with atrial fibrillation along with an enlarged heart and heart failure, followed by atrioventricular block, it's essential to consider genetic factors.^([1])Genetic testing can offer crucial diagnostic evidence, aiding in prognosis assessment and the adoption of appropriate treatment strategies.
基金support from National Science Foundation of China(22438005)the Natural Science Foundation of Jiangsu Province(BE2022056-3)is gratefully acknowledged.
文摘Nanoporous polymers are extensively coated on various substrates to deliver optical,permselective,or other functions.However,it remains desired to fast produce uniform nanoporous polymer coatings on substrates with complex surfaces.Herein,by manipulating the interactions between block copolymers and selective solvents,we prepare repairable nanoporous polymers on arbitrary substrates.This is realized by an extremely simple sequential coating process:sequential coating of block copolymers and their swelling agents on substrate surfaces.The swelling agents are comprised of two solvents that swell the constituent blocks of the copolymers to different degrees,rapidly producing polymer coatings with uniform,interconnected,sub-50 nm pores.This sequential coating process is able to conformally build nanoporous polymers on nonplanar substrates with large lateral sizes and complex surface features,and also to in situ repair defects arising during usages.We further demonstrate that the nanoporous coatings show excellent antireflective and membrane separation performances.This sequential coating process is dictated by polymer–solvent interactions,and is expected to find applications in diverse fields for its simplicity,adaptability,and the capability to produce well-defined nanoporosities.
基金supported by the National Natural Science Foundation of China (Nos.22208218,22078196,and 22278268)the Natural Science Foundation of Shanghai (No.22ZR1460400)Collaborative Innovation Center of Fragrance Flavour and Cosmetics,and Collaborative Innovation Project of Shanghai Institute of Technology (No.XTCX2023-07)。
文摘The diagnostic efficacy of contemporary bioimaging technologies remains constrained by inherent limitations of conventional imaging agents,including suboptimal sensitivity,off-target biodistribution,and inherent cytotoxicity.These limitations have catalyzed the development of intelligent stimuli-responsive block copolymers-based bioimaging agents,which was engineered to dynamically respond to endogenous biochemical cues(e.g.,p H gradients,redox potential,enzyme activity,hypoxia environment) or exogenous physical triggers(e.g.,photoirradiation,thermal gradients,ultrasound(US)/magnetic stimuli).Through spatiotemporally controlled structural transformations,stimuli-responsive block copolymers enable precise contrast targeting,activatable signal amplification,and theranostic integration,thereby substantially enhancing signal-to-noise ratios of bioimaging and diagnostic specificity.Hence,this mini-review systematically examines molecular engineering principles for designing p H-,redox-,enzyme-,light-,thermo-,and US/magnetic-responsive polymers,with emphasis on structure-property relationships governing imaging performance modulation.Furthermore,we critically analyze emerging strategies for optical imaging,US synergies,and magnetic resonance imaging(MRI).Multimodal bioimaging has also been elaborated,which could overcome the inherent trade-offs between resolution,penetration depth,and functional specificity in single-modal approaches.By elucidating mechanistic insights and translational challenges,this mini-review aims to establish a design framework of stimuli-responsive block copolymersbased for high fidelity bioimaging agents and accelerate their clinical translation in precise diagnosis and therapy.
文摘目的利用螺旋断层放射治疗(TOMO)计划系统制定乳腺癌保乳术后放射治疗计划,比较Block不同设计方法和径照功能对靶区和危及器官(OAR)剂量的影响。方法选择2024年2月至2025年2月宁波明州医院左侧乳腺癌保乳术后放射治疗女性患者15例,年龄34~66岁,平均年龄52岁;经病理明确诊断为左侧乳腺癌,其中病理分期TNMⅠ期4例,TNMⅡ期11例。基于TOMO计划系统为每例患者制定3种TOMO计划,第一种计划设计过程中应用了半挡Direction Block(DB)模式,第二种计划应用全挡Complete Block(CB)模式,第三种应用螺旋断层径照射(TD)模式制作计划;比较3种计划的剂量参数,包括靶区的适形度指数(HI)、均匀度指数(CI)、平均剂量、最大剂量;肺、心脏、健侧乳腺及脊髓等OAR剂量差异。结果在靶区剂量方面,DB组和CB组均具有较优异的均匀性和适形性,对比TD组计划差异有统计学意义(CI:0.861±0.041 vs 0.741±0.047、0.871±0.041 vs 0.741±0.047;HI:1.036±0.006 vs 1.052±0.007、1.037±0.004 vs 1.052±0.007)(P<0.05);OAR剂量方面,CB组计划的左肺V_(5)、V_(20)、D_(mean)和心脏V_(10)、V_(20)、D_(mean)均明显优于其他两组,差异均有统计学意义(P<0.05)。比较脊髓的最大剂量(D_(max)),CB组和TD组相对DB组较低,差异有统计学意义[(1.47±1.48)Gy vs(8.66±2.89)Gy、(0.46±0.13)Gy vs(8.66±2.89)Gy](P<0.05)。TD组计划的右肺V_(5),右侧乳腺平均剂量优于DB、CB两组,差异均有统计学意义[V_(5):(0.36±0.48)%vs(17.32±3.47)%、(0.36±0.48)%vs(10.66±4.10)%;右侧乳腺平均剂量:(1.53±0.88)Gy vs(6.79±1.41)Gy、(1.53±0.88)Gy vs(4.89±0.99)Gy](P<0.05)。但TD组心脏V_(10)、V_(10)较DB组、CB组计划高[V_(10):(12.39±4.39)%vs(9.72±5.03)%、(12.39±4.39)%vs(5.09±1.13)%;V_(10):(6.68±4.17)%vs(2.35±1.38)%、(6.68±4.17)%vs(1.47±0.78)%]。时间方面,CB组治疗时间最长,与DB组、TD组差异均有统计学意义[(15.18±2.31)min vs(9.68±1.43)min、(15.18±2.31)min vs(9.88±3.15)min](P<0.05)。结论针对左侧乳腺癌的3种计划比较,DB相对无明显优势,CB的优势表现在能明显降低患侧肺和心脏、脊髓的受量,TD则对保护对侧肺、乳腺能起更好的效果,但CB治疗时间较长,TD靶区适形性均匀性较差,可根据患者实际情况选择计划方式。
基金financially supported by National Key R&D Program Young Scientists Project(No.2023YFC3903100)the National Natural Science Foundation of China(No.22322503)analytical and testing assistance from the Analysis and Testing Center of HUST。
文摘Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford products with fixed sequences and compositions.Herein,we report the triethylborane/1,8-diazabicyclo[5.4.0]undec-7-ene(Et_3B/DBU)pair-mediated four-component switchable polymerization of propylene oxide(PO),CO_(2),phthalic anhydride(PA),and racemic lactide(rac-LA),which enables the on-demand synthesis of four different block copolymers,i.e.,poly(propylene phthalate)-b-polylactide(PPE-b-PLA),PPE-b-PLA-b-poly(propylene carbonate)(PPC),PPE-b-PPC-b-PLA,and PPE-b-PPCb-poly(propylene oxide)(PPO),through rationally modulating the Lewis pair(LP)ratio.Core to this protocol is that increasing the loading of Et_(3)B accelerates the ring-opening of PO while impeding the reactivity of rac-LA,thus allowing for fine-tuning of the thermodynamic and kinetic of the switchable polymerization.Therefore,the four polymerization cycles involving PO/PA ring-opening copolymerization(ROCOP),PO/CO_(2) ROCOP,rac-LA ring-opening polymerization(ROP),and PO ROP can be connected and discriminated in precisely programmed manners.
基金supported by the National Natural Science Foundation of China[grant numbers 12071329,12471246].
文摘In mixture experiments,the observed response is determined by the relative proportions of the components,consequently rendering the experimental region a simplex.This paper focuses primarily on the optimal designs of mixture experiments that involve process variables.Prior research has extensively delved into optimal orthogonal block designs for some classic mixture models with process variables.Based on the framework of general blending models,this paper proposes a class of symmetric linear mixture models,which can be regarded as a generalization of many existing ones.Under the orthogonal blocking conditions,orthogonal block designs are devised through Latin squares in the presence of process variables.TheD-,A-,and E-optimality criteria are utilized to obtain optimal designs at the boundary of the simplex in the case of 3 components.As the values of the exponents change,numerically derived optimal design points are presented to illustrate the pattern of their variations,and to verify the consistency of the results with previous research on some specific symmetric general blending models.
基金funded by Science and Technology Innovation Project grant No.ZZKY20222304.
文摘Aiming at the problem of potential information noise introduced during the generation of ghost feature maps in GhostNet,this paper proposes a novel lightweight neural network model called ResghostNet.This model constructs the Resghost Module by combining residual connections and Adaptive-SE Blocks,which enhances the quality of generated feature maps through direct propagation of original input information and selection of important channels before cheap operations.Specifically,ResghostNet introduces residual connections on the basis of the Ghost Module to optimize the information flow,and designs a weight self-attention mechanism combined with SE blocks to enhance feature expression capabilities in cheap operations.Experimental results on the ImageNet dataset show that,compared to GhostNet,ResghostNet achieves higher accuracy while reducing the number of parameters by 52%.Although the computational complexity increases,by optimizing the usage strategy of GPU cachememory,themodel’s inference speed becomes faster.The ResghostNet is optimized in terms of classification accuracy and the number of model parameters,and shows great potential in edge computing devices.
基金support from Research Council of Norway via STIPINST PhD grant(Grant No.323307),Bever Control AS,and Bane NOR.
文摘This paper presents a novel artificial intelligence(AI)-assisted two-stage method for optimising rock slope stability by integrating advanced 3D modelling with rock support design,aiming at minimising risks,material usage,and costs.In the first stage,an extended key block analysis identifies key blocks and key block groups,accounting for progressive failure and force interactions.The second stage uses AI algorithms to optimise rockbolting design,balancing stability,cost,and material use.The most efficient algorithms include the multi-objective tree-structured Parzen estimator(MOTPE)and non-dominated sorting genetic algorithms(NSGA-II and NSGA-III).Applied to the Larvik rock slope,the optimised solution uses 18 pre-tensioned cablebolts,providing 13.2 MN of active force and achieving a factor of safety of 1.31 while reducing the average anchorage length by approximately 16%compared to traditional design.The AI-assisted approach also reduces computation time by over 90%compared to Quasi-Monte Carlo(QMC)methods,demonstrating its efficiency for small-scale civil engineering projects and large-scale mining operations.The developed tool is practical,compatible with Building Information Modelling(BIM),and ready for engineering implementation,supporting sustainable and cost-effective rock slope stabilisation.While the method is largely automated,professional judgement remains crucial for verifying ground conditions and selecting the final solution.Future work will focus on integrating data uncertainties,addressing complex block deformation mechanisms,refining optimisation objectives,and improving the performance of multi-objective optimisation for slope rockboling applications to further enhance the method's versatility.
基金Supported by Anhui Provincial Engineering Research Center for Sports and Health Information Monitoring Technology(KF2023012)。
文摘WiFi-based human activity recognition(HAR)provides a non-intrusive approach for ubiquitous monitoring;however,achieving both high accuracy and robustness simultaneously remains a significant challenge.This paper proposes a Convolutional Neural Network with Enhanced Convolutional Block Attention Module(CNN-ECBAM)framework.The approach systematically converts raw Channel State Information(CSI)into pseudo-color images,effectively preserving essential signal characteristics for deep neural network processing.The core innovation is an Enhanced Convolutional Block Attention Module(ECBAM),tailored to CSI data characteristics,which integrates Efficient Channel Attention(ECA)and Multi-Scale Spatial Attention(MSSA).By employing learnable adaptive fusion weights,it achieves dynamic synergy between channel and spatial features,enabling the network to capture highly discriminative spatiotemporal patterns.The ECBAM module is integrated into a unified Convolutional Neural Network(CNN)to form the overall CNN-ECBAM model.Experimental results on the UT-HAR and NTU-Fi_HAR datasets demonstrate that CNN-ECBAM achieves competitive performance in recognition accuracy and outperforms mainstream baseline models.Specifically,it attains 99.20%accuracy on UT-HAR(surpassing ResNet-18 at 98.60%)and achieves 100%accuracy on NTU-Fi_HAR(exceeding GAF-CNN at 99.62%).These results validate the effectiveness of the proposed method for high-precision and reliable WiFi-based HAR.
基金supported by the National Natural Science Foundation of China(No.52274346).
文摘Waste graphitization cathode carbon blocks are a type of hazardous solid waste generated during the aluminum electrolysis process,and their proper disposal is a key step in the resource utilization of discarded graphite.This study utilizes the porous“defect advantage”of a cathode carbon block matrix to prepare silicon-doped and asphalt-coated detoxified and purified waste graphitization cathode carbon blocks for use as high-performance silicon/carbon composite anode materials.The results show that the uniformly silicondoped silicon/carbon composite material features a unique amorphous carbon-encapsulated“locked silicon”structure,which effectively addresses issues such as cathode volume expansion,excessive growth of the solid electrolyte interphase(SEI)film,and poor electrical contact between active materials.Consequently,electrochemical performance is enhanced.After assembly in a half-cell,the PSCC/10%Si@C(purified waste graphitization cathode carbon/10%Si@C)material exhibits optimal electrochemical stability,with an initial charging specific capacity of 514.5 mAh/g at 0.1 C(1 C=170 mA/g)and a capacity retention rate of 95.1%after 100 cycles.At a charge rate of 2.0 C,a specific capacity of 216.9 mAh/g is achieved.This technology provides a new pathway for the economical and high-value utilization of waste cathode carbon blocks and the development of low-cost,high-performance anode materials.
基金financially supported by the Russian Science Foundation(No.23-13-00205)。
文摘Star-shaped six-arm polymers with hexaaza[2_(6)]orthoparacyclophane core and arms of block copolymers of poly-2-ethyl-5,6-dihydrooxazine with poly-2-isopropyl-5,6-dihydrooxazine were synthesized successfully using cationic ring-opening polymerization.The ratio of blocks,the order of their attachment to the core,and arm length were varied.Conformation of synthesized stars was determined by methods of molecular hydrodynamics and optics.It has been shown that star-shaped molecules were characterized by high intramolecular density,and the arm folding increased with their lengthening.The influence of the structure of block copolymers and their molar mass on the critical micelle concentration has been established.Complexes of synthesized star-shaped block copolymers with curcumin were obtained and the efficient binding of curcumin to polymer molecules was demonstrated.The behavior of the aqueous solutions of the prepared polymer stars and their complexes with curcumin was investigated by light scattering and turbidimetry methods.The influence of the structure and molar mass of star polymers on their thermoresponsiveness and the phase separation temperatures in aqueous solutions was analyzed.A slight increase in the phase separation temperature was found on passage from polymer solutions to solutions of polymer complexes with hydrophobic curcumin.
文摘Objective To observe the analgesic effect on herpes zoster treated by the comprehensive therapy of blocking, surrounding needling, pricking and cupping combined with bloodletting at Longyan （龙眼, Extra） acupoint. Methods According to the random mumber table, 104 cases of herpes zoster were randomized into an observation group and a control group, 52 cases in each one. In the observation group, the blocking method was used at the starting site and the ending site of herpetic zone, the surrounding needling method was applied toward the center of the painful zone, with horizontal needling technique; and the local pricking and cupping methods as well as the bloodletting at Longyan （Extra） acupoint were adopted. In the control group, Jiáj （夹脊 EX-B 2） at the corresponding affected nerve segments and the local Ashi points were selected and stimulated with electroacupuncture. The visual analogue scale （VAS） was adopted to determine the analgesic effect 20 min, 1, 6, 12, 24 and 48 h after treatment separately in each group. Results The onset time of analgesic effect in the observation group was shorter than that in the control group and the efficacy time of duration was longer than that in the control group （all P0.05）. The analgesic effect and the result of comprehensive efficacy assessment were superior to those of the control group （both P0.05）. Conclusion The comprehensive therapy of blocking, surrounding needling, pricking and cupping method combined with bloodletting at Longyan （Extra） achieves the significant analgesic effect on herpes zoster.
基金Supported by Project of Science and Technology Bureau,Yichang,Hubei:A:01301-46
文摘Objective To explore the best therapeutic method in the treatment of peripheral facial paralysis. Methods One hundred and twenty cases were randomized into a conventional acupuncture group [Yangbai （阳白 GB 24）, Sibai （四白 ST 2）, Yingxiang （迎香 LI 20）, etc.], a Renying （人迎ST 9） acupuncture group and an operation ＋ acupuncture group [acupuncture at ST 9 as the main acupoint and the stellate ganglion block （SGB）], 40 cases in each one. The treatment was given once a day, 7 treatments made one session. After 3 sessions of treatment, the latency and the amplitude of the direct stimulation evoked potential of the facial nerve （ENoG） were compared before and after treatment in three groups, as well as R2 and R2 values of blink reflex （BR）. The total clinical efficacy was assessed. Results The latency of ENoG was shortened and the amplitude was increased significantly in three groups. After treatment, ENoG latency was lower significantly in the operation ＋ acupuncture group as compared with that in the conventional acupuncture group （P〈0.05）. In the Renying （人迎 ST 9） acupuncture group, the amplitude of ENoG was increased as compared with P〈0.05）. After treatment in three groups, those in the other two groups （all R2 and R2 values were decreased significantly. The differences in R1 and R2 values in the Renying （人迎 ST 9） acupuncture group and the operation ＋ acupuncture group before and after treatment were bigger than those in the conventional acupuncture group （all P〈0.05）, and the difference in R2 value in the operation ＋ acupuncture group was bigger than that in the Renying （人迎 ST 9） acupuncture group （P〈O.05）. The clinical markedly effective and curative rate was 87.5% （35/40） in the operation ＋ acupuncture group, which was superior to 77.5% （32/40） in the Renying （）人迎 ST 9）acupuncture group and higher significantly than 65.0% （26/40） in the conventional acupuncture group （P〈0.05）. Conclusion Compared with the conventional acupuncture, the efficacy on peripheral facial paralysis is much better in the Renying （人迎 ST 9） acupuncture group and the operation ＋ acupuncture group. Moreover, the early reflex function of the damaged facial nerve is much better recovered in the operation ＋ acupuncture group as compared with that in the Renying （人迎 ST 9） acupuncture group.
文摘Let N be the Lie algebra of all n x n dominant block upper triangular matrices over a field F. In this paper, we explicitly describe all Lie triple derivations of N when char（F） ≠ 2. As an application, we characterize Lie derivations of N when char（F） ≠ 2.
