The shapes of block within the rock mass have an important effect on the rock properties, so it＇s very important to evaluate the shapes of rock fragmentation and to determine the geometric characteristics distributio...The shapes of block within the rock mass have an important effect on the rock properties, so it＇s very important to evaluate the shapes of rock fragmentation and to determine the geometric characteristics distribution of the block. The previous methods to classify rock block shape are based on the assumption that a block shape is approximately orthogonal, which is acceptable in only a few rock masses. This paper proposes a new method for block shape classification using triangular diagram together with parameters of co-linearity e and volume coefficient K, which combines the shape categorization with block volume for statistical analysis. Rock block equivalent size calculation methods based on block shape is proposed and the block cumulative percentage of total volume statistical analysis is given. In order to verify this block shape classification method, three ideal rock masses with approximately orthogonal joint sets have been generated and simulated.展开更多
Novel Y-shaped block copolymers of poly（ethylene glycol） and poly（N-isopropylacrylamide）, PEG-b-（PNIPAM）2, were successfully synthesized through atom transfer radical polymerization （ATRP）. A difunctional macr...Novel Y-shaped block copolymers of poly（ethylene glycol） and poly（N-isopropylacrylamide）, PEG-b-（PNIPAM）2, were successfully synthesized through atom transfer radical polymerization （ATRP）. A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly（ethylene glycol） monomethyl ether （PEG）. The copolymers were obtained via the ATRP ofN-isopropylacrylamide （NIPAM） at 30℃ with CuCl/Me6TREN as a catalyst system and DMF/H2O （v/v = 3：1） mixture as solvent. The resulting copolymers were characterized by gel permeation chromatography （GPC） and ^1H NMR. These block copolymers show controllable molecular weights and narrow molecular weight distributions （PDI 〈 1.15）. Their phase transition temperatures and the corresponding enthalpy changes in aqueous solution were measured by differential scanning calorimetry （DSC）. As a result, the phase transition temperature of PEG45-b-（PNIPAM55）2 is higher than that of PNIPAM, however, the corresponding enthalpy change is much lower, indicating the significant influence of the macromolecular composition and architecture on the phase transition.展开更多
A series of H-shaped （PS）2PEG（PS）2 block copolymers with different PS chain lengths were prepared. The influence of different confinements active on the crystallization and self-nucleation （SN） behavior of the P...A series of H-shaped （PS）2PEG（PS）2 block copolymers with different PS chain lengths were prepared. The influence of different confinements active on the crystallization and self-nucleation （SN） behavior of the PEG blocks was investigated by differential scanning calorimetry （DSC）. When the content of the crystalline block was high, a classical SN behavior was obtained. The block copolymer with PEG content of 49% （by weight） showed a classical SN behavior with a narrow self-nucleation domain and had bimodal crystallization exotherms. When the PEG dispersed as separated microdomains in the block copolymer, the self-nucleation domain disappeared and only annealing was observed.展开更多
A cup shape is a dynamic morphology of cells and organelles. With the aim of elucidating the formation of the biotic cup-shaped morphology, this study investigated cup-shaped vesicles consisting of an amphiphilic dibl...A cup shape is a dynamic morphology of cells and organelles. With the aim of elucidating the formation of the biotic cup-shaped morphology, this study investigated cup-shaped vesicles consisting of an amphiphilic diblock copolymer from the aspect of synthetic polymer chemistry. Cup-shaped vesicles were obtained by the polymerization-induced self-assembly of poly(methacrylic acid)-block-poly(n-butyl methacrylate-random-methacrylic acid), PMAA-b-P(BMA-r-MAA), in an aqueous methanol solution using the photo nitroxide-mediated controlled/living radical polymerization technique. Field emission scanning electron microscopic observations demonstrated that the cup-shaped vesicles were suddenly formed during the late stage of the polymerization due to the extension of the hydrophobic P(BMA-r-MAA) block chain. During the early stage, the polymerization produced spherical vesicles rather than a cup shape. As the hydrophobic block chain was extended by the polymerization progress, the spherical vesicles reduced the size and were accompanied by the generation of small particles that were attached to the vesicles. The vesicles continued to reduce the size due to further extension of the hydrophobic chain;however, they suddenly grew into cup-shaped vesicles. This growth was accounted for by a change in the critical packing shape of the copolymer due to the hydrophobic chain extension. These findings are helpful for a better understanding of the biotic cup-shaped vesicle formation.展开更多
The entire roller inlayed block intelligence cold strip shape meter is developed successfully in this paper,which can stably work chronically in the cold rolling workshop,the independent innovation of the key technolo...The entire roller inlayed block intelligence cold strip shape meter is developed successfully in this paper,which can stably work chronically in the cold rolling workshop,the independent innovation of the key technology of cold strip shape measuring,the foreign technical monopoly and blockade are broken through.The structural form which is different from the international popular segmented detection roller is put forward,the entire detection roller inlayed block is developed,a group of elastic blocks in that the sense organs are installed are inlayed in the radial symmetry rectangular grooves of the detection roller body,the entire roller structure is composed of elastic pieces and the roller body,the scratch of the strip surface due to different thermal expansion of the traditional detection roller measuring unit is avoided effectively.The signal transmission form which is different form the international popular dry slip ring is put forward,the spray wet slip ring is developed,slip ring and detection roller can be taken down and installed as possibly as fast,so the maintain is convenient,while through the section auto-spray cleaning,lubrication and cooling, the service life is remarkable improved and the outside interference signal is reduced.The signal processing form which is different form the international popular gathering card is put forward,the embedded DSP shape signal processing hardware system is developed,the electromagnet,temperature,humidity and vibration's interference of industry practice to shape transmission signal can be effectively avoided,which can guarantee the instantaneity and measured precision of shape measured signal.The shape signal processing software system whose function contains error compensation,pattern recognition,establishment of the target shape and the closed-loop control calculation is built,the shape meter' computer human interaction is friendly,and function of shape meter is strong,at the same time the intellectualized level of the shape meter is improved.Now,this shape meter has been successfully applied on the 1 250 mm cold strip mill of Angang Steel Company Limited,the long-term operating testing is done,every guide line achieves the anticipative effect,the measuring precision is high and the measuring signal is stable and reliable,the shape meter is tested on high speed,big tension,changed wrap angle and big depressed complicated working conditions,any scratch of the detection roller surface and the strip surface is not appearing,it can completely adapt well to the industrial production environment,reaching the international advanced level.展开更多
In CAD/CAM, mesh rather than smooth surface is only needed sometimes. A mesh-generating method from permanence principle of Coons patch is developed. A new mesh point is defined through local small subpatch and all me...In CAD/CAM, mesh rather than smooth surface is only needed sometimes. A mesh-generating method from permanence principle of Coons patch is developed. A new mesh point is defined through local small subpatch and all mesh points are computed by a linear system with special symmetric block tridiagonal coefficient matrix. By simplification, the determinant of coefficient matrix is determined by determinants of submatrices. Condition of existence of solution is given. Whether coefficient matrix is singular can be judged by a simple polynomial function with the eigenvalue of submatrix as variable. Numerical examples demonstrate the effects of shape parameters.展开更多
基金supported by the Yunnan Provincial College and Institute Science and Technology Cooperation Projects (Grant No.2006YX26)the Technological Innovation and Technical Development Special Projects in Yunnan Province (Grant No.2007GA007)
文摘The shapes of block within the rock mass have an important effect on the rock properties, so it＇s very important to evaluate the shapes of rock fragmentation and to determine the geometric characteristics distribution of the block. The previous methods to classify rock block shape are based on the assumption that a block shape is approximately orthogonal, which is acceptable in only a few rock masses. This paper proposes a new method for block shape classification using triangular diagram together with parameters of co-linearity e and volume coefficient K, which combines the shape categorization with block volume for statistical analysis. Rock block equivalent size calculation methods based on block shape is proposed and the block cumulative percentage of total volume statistical analysis is given. In order to verify this block shape classification method, three ideal rock masses with approximately orthogonal joint sets have been generated and simulated.
基金support from the National Natural Science Foundation of China(No. 20134020)the Visiting Scholar Project of Shandong Province of China(No.20081001)the Science Research Fund of Shandong Jiaotong University of China(No.Z200802)
文摘Novel Y-shaped block copolymers of poly（ethylene glycol） and poly（N-isopropylacrylamide）, PEG-b-（PNIPAM）2, were successfully synthesized through atom transfer radical polymerization （ATRP）. A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly（ethylene glycol） monomethyl ether （PEG）. The copolymers were obtained via the ATRP ofN-isopropylacrylamide （NIPAM） at 30℃ with CuCl/Me6TREN as a catalyst system and DMF/H2O （v/v = 3：1） mixture as solvent. The resulting copolymers were characterized by gel permeation chromatography （GPC） and ^1H NMR. These block copolymers show controllable molecular weights and narrow molecular weight distributions （PDI 〈 1.15）. Their phase transition temperatures and the corresponding enthalpy changes in aqueous solution were measured by differential scanning calorimetry （DSC）. As a result, the phase transition temperature of PEG45-b-（PNIPAM55）2 is higher than that of PNIPAM, however, the corresponding enthalpy change is much lower, indicating the significant influence of the macromolecular composition and architecture on the phase transition.
基金supported by the National Natural Science Foundation of China(No.50503022)Programs and the Fund for Creative Research Groups(No.50621302)
文摘A series of H-shaped （PS）2PEG（PS）2 block copolymers with different PS chain lengths were prepared. The influence of different confinements active on the crystallization and self-nucleation （SN） behavior of the PEG blocks was investigated by differential scanning calorimetry （DSC）. When the content of the crystalline block was high, a classical SN behavior was obtained. The block copolymer with PEG content of 49% （by weight） showed a classical SN behavior with a narrow self-nucleation domain and had bimodal crystallization exotherms. When the PEG dispersed as separated microdomains in the block copolymer, the self-nucleation domain disappeared and only annealing was observed.
文摘A cup shape is a dynamic morphology of cells and organelles. With the aim of elucidating the formation of the biotic cup-shaped morphology, this study investigated cup-shaped vesicles consisting of an amphiphilic diblock copolymer from the aspect of synthetic polymer chemistry. Cup-shaped vesicles were obtained by the polymerization-induced self-assembly of poly(methacrylic acid)-block-poly(n-butyl methacrylate-random-methacrylic acid), PMAA-b-P(BMA-r-MAA), in an aqueous methanol solution using the photo nitroxide-mediated controlled/living radical polymerization technique. Field emission scanning electron microscopic observations demonstrated that the cup-shaped vesicles were suddenly formed during the late stage of the polymerization due to the extension of the hydrophobic P(BMA-r-MAA) block chain. During the early stage, the polymerization produced spherical vesicles rather than a cup shape. As the hydrophobic block chain was extended by the polymerization progress, the spherical vesicles reduced the size and were accompanied by the generation of small particles that were attached to the vesicles. The vesicles continued to reduce the size due to further extension of the hydrophobic chain;however, they suddenly grew into cup-shaped vesicles. This growth was accounted for by a change in the critical packing shape of the copolymer due to the hydrophobic chain extension. These findings are helpful for a better understanding of the biotic cup-shaped vesicle formation.
文摘The entire roller inlayed block intelligence cold strip shape meter is developed successfully in this paper,which can stably work chronically in the cold rolling workshop,the independent innovation of the key technology of cold strip shape measuring,the foreign technical monopoly and blockade are broken through.The structural form which is different from the international popular segmented detection roller is put forward,the entire detection roller inlayed block is developed,a group of elastic blocks in that the sense organs are installed are inlayed in the radial symmetry rectangular grooves of the detection roller body,the entire roller structure is composed of elastic pieces and the roller body,the scratch of the strip surface due to different thermal expansion of the traditional detection roller measuring unit is avoided effectively.The signal transmission form which is different form the international popular dry slip ring is put forward,the spray wet slip ring is developed,slip ring and detection roller can be taken down and installed as possibly as fast,so the maintain is convenient,while through the section auto-spray cleaning,lubrication and cooling, the service life is remarkable improved and the outside interference signal is reduced.The signal processing form which is different form the international popular gathering card is put forward,the embedded DSP shape signal processing hardware system is developed,the electromagnet,temperature,humidity and vibration's interference of industry practice to shape transmission signal can be effectively avoided,which can guarantee the instantaneity and measured precision of shape measured signal.The shape signal processing software system whose function contains error compensation,pattern recognition,establishment of the target shape and the closed-loop control calculation is built,the shape meter' computer human interaction is friendly,and function of shape meter is strong,at the same time the intellectualized level of the shape meter is improved.Now,this shape meter has been successfully applied on the 1 250 mm cold strip mill of Angang Steel Company Limited,the long-term operating testing is done,every guide line achieves the anticipative effect,the measuring precision is high and the measuring signal is stable and reliable,the shape meter is tested on high speed,big tension,changed wrap angle and big depressed complicated working conditions,any scratch of the detection roller surface and the strip surface is not appearing,it can completely adapt well to the industrial production environment,reaching the international advanced level.
基金Supported by National Natural Science Foundation of China(No.60970097,No.11271376)
文摘In CAD/CAM, mesh rather than smooth surface is only needed sometimes. A mesh-generating method from permanence principle of Coons patch is developed. A new mesh point is defined through local small subpatch and all mesh points are computed by a linear system with special symmetric block tridiagonal coefficient matrix. By simplification, the determinant of coefficient matrix is determined by determinants of submatrices. Condition of existence of solution is given. Whether coefficient matrix is singular can be judged by a simple polynomial function with the eigenvalue of submatrix as variable. Numerical examples demonstrate the effects of shape parameters.
