Copolymerization is a commonly employed method for optimizing the properties of polymer materials.Incorporating ether segments into polyesters main chain to obtain polyether-polyester copolymers is an effective strate...Copolymerization is a commonly employed method for optimizing the properties of polymer materials.Incorporating ether segments into polyesters main chain to obtain polyether-polyester copolymers is an effective strategy to realize the integration of multiple properties of polyester and polyether,and to develop more high-performance,multi-purpose polymer materials.Herein,the synthesis of poly(ether-ester)s is accessible by employing the biphenyl-linked heterodinuclear salen Cr-AI complex in the presence of PPNCI for the copolymerization of epoxides and£-caprolactone(CL).Monitoring the copolymerization process reveals that catalyst 1 exhibited good performance for the copolymerization of epoxides and CL,affording copolymers with a gradient sequence structure.The dynamic thermomechanical analysis(DMA)study indicates the obtained poly(ether-ester)s possess enhanced flexibility compared with the block copolymers or blend of PPO and PCL homopolymers with the same ratio.This study provides a theoretical basis for the preparation of high-performance polymer materials.展开更多
Segmented block copolymer based on nylon6 （N6） and polyethylene oxide （PEO） with stochiometric ratio was synthesized via a two-step process. The first step represents end capping of N6 in the presence of adipic ac...Segmented block copolymer based on nylon6 （N6） and polyethylene oxide （PEO） with stochiometric ratio was synthesized via a two-step process. The first step represents end capping of N6 in the presence of adipic acid leading to carboxy terminated N6, and the second one is polycondensation of the latter product with PEO in the presence of catalyst and thermostabilizer to form a high molecular weight multi-block copolymer. Several methods were applied to characterize the synthesized copolyrner such as Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, differential thermal analysis, differential scanning calorimetry, X-ray diffraction and atomic force microscopy. The obtained results confirmed the multi-block structure for copolymer with a very high degree of micro-phase separation. Atomic force microscopy micrographs indicated that the morphology was the dispersion of high stiffness nanostructured polyamide （PA） domains in the amorphous region of PEO matrix, which can be very important in their performance for membrane processes.展开更多
In the present work, poly（propylene glycol） （PPG） was block copolymerized to form polylactide-poly（propylene glycol）-polylactide （PL-PPG-PL） triblock copolymers for preparing flexible stereocomplex PL （scPL）...In the present work, poly（propylene glycol） （PPG） was block copolymerized to form polylactide-poly（propylene glycol）-polylactide （PL-PPG-PL） triblock copolymers for preparing flexible stereocomplex PL （scPL） blend films. The scPL blend films were prepared by solution blending of poly（L-lactide）-PPG-poly（L-lactide） （PLL-PPG-PLL） and poly（D-lactide）- PPG-poly（D-lactide） （PDL-PPG-PDL） triblock copolymers before film casting. The influences of PL end-block lengths （2 ×10^4 and 4×10^4 g/tool） and blend ratios （75/25, 50/50 and 25/75 W/W） on the stereocomplexation and mechanical properties of the blend films were evaluated. From DSC and WAXD results, the 50/50 blend films had complete stereocomplexation. Phase separation between the scPL and PPG phases was not observed from their SEM images. The tensile stress and elongation at break increased with the sterecomplex crystallinities and PL end-block lengths. The PPG middle-blocks enhanced elongation at break of the scPL films. The results showed that the PL-PPG-PL triblock structures did not affect stereocomplexation of the PLL/PDL block blending. In conclusion, the phase compatibility and flexibility of the scPL films were improved by PPG block copolymerization.展开更多
Novel Y-shaped block copolymers of poly（ethylene glycol） and poly（N-isopropylacrylamide）, PEG-b-（PNIPAM）2, were successfully synthesized through atom transfer radical polymerization （ATRP）. A difunctional macr...Novel Y-shaped block copolymers of poly（ethylene glycol） and poly（N-isopropylacrylamide）, PEG-b-（PNIPAM）2, were successfully synthesized through atom transfer radical polymerization （ATRP）. A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly（ethylene glycol） monomethyl ether （PEG）. The copolymers were obtained via the ATRP ofN-isopropylacrylamide （NIPAM） at 30℃ with CuCl/Me6TREN as a catalyst system and DMF/H2O （v/v = 3：1） mixture as solvent. The resulting copolymers were characterized by gel permeation chromatography （GPC） and ^1H NMR. These block copolymers show controllable molecular weights and narrow molecular weight distributions （PDI 〈 1.15）. Their phase transition temperatures and the corresponding enthalpy changes in aqueous solution were measured by differential scanning calorimetry （DSC）. As a result, the phase transition temperature of PEG45-b-（PNIPAM55）2 is higher than that of PNIPAM, however, the corresponding enthalpy change is much lower, indicating the significant influence of the macromolecular composition and architecture on the phase transition.展开更多
The effect of the architecture of poly(ethylene glycol)/poly(L-lactide)(PEG/PLLA) block copolymers on the non-isothermal crystallization behaviors of PLLA blocks was investigated by differential scanning calorimetry(D...The effect of the architecture of poly(ethylene glycol)/poly(L-lactide)(PEG/PLLA) block copolymers on the non-isothermal crystallization behaviors of PLLA blocks was investigated by differential scanning calorimetry(DSC) and wide angle X-ray diffraction(WAXD). 1-Arm MPEG-b-PLLA and 4-arm PEG-b-PLLA(4PEG-b-PLLA) were synthesized by the ring-opening polymerization of Llactide in the presence of poly(ethylene glycol) methyl ether(MPEG) and 4-arm poly(ethylene glycol)(4PEG). 4-Arm PLLA-b-MPEG(4PLLA-b-PEG) was synthesized by coupling 4-arm PLLA and MPEG. The WAXD results indicated that the crystalline structure of PLLA blocks did not alter due to the different chain architectures. The average values of Avrami index(ˉn) were all above 4, which indicated that the nucleation mechanism of PLLA blocks was heterogeneous nucleation, regardless of the architectures. The overall crystallization rates were decreased markedly as following: MPEG-b-PLLA > 4PEG-b-PLLA > 4PLLA-b-PEG, ascribed to the different confinement by PEG blocks and to the steric hindrance of chain architectures. Therefore, the crystallization of PLLA blocks became more difficult and the crystallization activation energy of the PLLA blocks increased due to the confinement of chain architectures.展开更多
Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile...Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile） （PPEN） in the presence of chlorobenzcne/N-methyl pyrrolidone （NMP） as solvents. The products were characterized by FTIR, ^1H NMR and gel permeation chromatography. Differential scanning calorimetry analysis indicated that the block copolymers showed separated microphase.展开更多
A series of aliphatic biodegradable poly（ether-ester）s based on poly（butylene succinate）（PBS）as hard segment and poly（tetramethylene oxide）（PTMO,M_n=1 000 g/mol） as soft segment were synthesized.The composit...A series of aliphatic biodegradable poly（ether-ester）s based on poly（butylene succinate）（PBS）as hard segment and poly（tetramethylene oxide）（PTMO,M_n=1 000 g/mol） as soft segment were synthesized.The composition dependence of thermal behavior,morphology and mechanical properties was investigated by differential scanning calorimetry（DSC）,atomic force microscopy（AFM）,and tensile testing.The crystallization temperature（T_c） and melting temperature（T_m） of the PBS block within poly（ether-ester）s decrease steadily at first,but decrease sharply with PTMO content above 50 wt%.Two crystallization peaks were detected for PTMO in PBSPTMO60 sample,suggesting the occurrence of fractionated crystallization.The crystallization enthalpies（△H_c） and melting enthalpies（△H_m） of PBS block decrease at first,then increase as PTMO content increases further.AFM has demonstrated that phase-separated morphology transforms from a phase of continuous hard matrix to one of continuous soft matrix containing isolated hard domain as PTMO content is increased.Finally,the results of tensile testing show that the poly（ether-ester）s present the behavior of plastics when PTMO content is below 40 wt%,and of thermoplastic elastomers with PTMO content above 50 wt%.By varying the composition of copolymer,the aliphatic poly（ether-ester）s plastics,or especially biodegradable aliphatic poly（ether-ester）s thermoplastic elastomers can be obtained.展开更多
In this contribution, we reported a novel synthesis of block copolymer networks composed of poly(ε-caprolactone)(PCL) and polyethylene(PE) via the co-hydrolysis and condensation of α,ω-ditriethoxylsilane-terminated...In this contribution, we reported a novel synthesis of block copolymer networks composed of poly(ε-caprolactone)(PCL) and polyethylene(PE) via the co-hydrolysis and condensation of α,ω-ditriethoxylsilane-terminated PCL and PE telechelics. First, α,ω-dihydroxylterminated PCL and PE telechelics were synthesized via the ring-opening polymerization of ε-caprolactone and the ring-opening metathesis polymerization of cyclooctene followed by hydrogenation of polycyclooctene. Both α,ω-ditriethoxylsilane-terminated PCL and PE telechelics were obtained via in situ reaction of α,ω-dihydroxyl-terminated PCL and PE telechelics with 3-isocyanatopropyltriethoxysilane. The formation of networks was evidenced by the solubility and rheological tests. It was found that the block copolymer networks were microphase-separated. The PCL and PE blocks still preserved the crystallinity. Owing to the formation of crosslinked networks, the materials displayed shape memory properties. More importantly, the combination of PCL with PE resulted that the block copolymer networks had the triple shape memory properties, which can be triggered with the melting and crystallization of PCL and PE blocks. The results reported in this work demonstrated that triple shape memory polymers could be prepared via the formation of block copolymer networks.展开更多
Fouling resistance of ultrafiltration(UF) membranes is critical for their long-term usages in terms of stable performance, so convenient approaches to prepare fouling-resistant membranes are always anticipated. Herein...Fouling resistance of ultrafiltration(UF) membranes is critical for their long-term usages in terms of stable performance, so convenient approaches to prepare fouling-resistant membranes are always anticipated. Herein, we demonstrate the facile fabrication of antifouling polysulfone-block-poly(ethylene glycol)(PSF-b-PEG, SFEG)composite membranes. SFEG layer was coated onto macroporous supports and cavitated by immerging them in acetone/n-propanol following the mechanism of selective swelling induced pore generation. Thus-produced SFEG membranes possessed high permeance and excellent mechanical strength. Meanwhile, the structures and separation performances of the SFEG layers can be continuously tuned through simply changing swelling durations. More importantly, the hydrophilic PEG chains were spontaneously enriched onto the pore walls through swelling treatment, endowing intrinsic antifouling property to the SFEG membranes. Bovine serum albumin(BSA)/humic acid(HA) fouling tests proved the prominent fouling resistance of SFEG membranes, and the fouling resistance is expected to be long-standing because of the firm connection between PEG chains and PSF matrix by covalent bonding.展开更多
Poly(styrene-6-isobutylene-6-styrene)triblock copolymer(SIBS),a kind of thermoplastic elastomer with biocompatibility and biostability containing fully saturated soft segments,could be synthesized via living cationic ...Poly(styrene-6-isobutylene-6-styrene)triblock copolymer(SIBS),a kind of thermoplastic elastomer with biocompatibility and biostability containing fully saturated soft segments,could be synthesized via living cationic copolymerization.A novel poly[(styrene-co-methylstyrene)-b-isobutylene-b-(styrene-co-methylstyrene)]-g-polytetrahydrofuran(M-SIBS-g-PTHF)block graft copolymer was prepared to increase the polarity and service temperature of SIBS by grafting polar PTHF segments onto SIBS.A series of the above block graft copolymers with average grafting numbers from 2 to 6 and molecular weights of PTHF branches ranging from 200 g·mol^(-1)to 4200 g·mol^(-1)were successfully synthesized via living cationic ring-opening polymerization of tetrahydrofuran(THF)coinitiated by AgCI04.The introduction of PTHF branches led to an obvious microphase separation due to thermodynamic incompatibility among the three kinds of segments of polyisobutylene(PIB),polystyrene(PS)and PTHF.Moreover,the microphase separation promotes the rearrangement of PTHF branches to form the nanocrystallization-locked physically cross-linked network after storage at room temperature for 2 months,leading to insolubility of the copolymers even in good solvents.The melting temperature and enthalpy of PTHF nanocrystallization locked in hard domains of M-SIBS-g5-PTHF-1.1k block graft copolymer increased remarkably up to 153℃and 117.0 J·g^(-1)by 23℃and 11.6 J·g^-1(respectively after storage for long time.Storage modulus(G′)is higher than loss modulus(G″)of M-SIBS-g-PTHF block graft copolymer at temperatures ranging from 100℃to 180℃,which is much higher than those of the SIBS triblock copolymer.To the best of our knowledge,this is the first example of high performance M-SIBS-g-PTHF block graft copolymers containing segments of PIB,PS and PTHF with nanocrystallization-locked architecture.展开更多
Micron-sized polymer particles from single poly(4-butyltriphenylamine) (PBTPA) homopolymer, binary polymer blend [PBTPA/poly(methyl methacrylate) (PMMA)], and ternary polymer blend (PBTPA/PBTPA-b-PMMA/PMMA) via a solv...Micron-sized polymer particles from single poly(4-butyltriphenylamine) (PBTPA) homopolymer, binary polymer blend [PBTPA/poly(methyl methacrylate) (PMMA)], and ternary polymer blend (PBTPA/PBTPA-b-PMMA/PMMA) via a solvent evaporation method, and the surface morphologies and inside structure of resulting particles were investigated. Spherical homopolymer particles with smooth surface were resulted from PBTPA with low molecular weight. In the case of binary blends (PBTPA/PMMA = 1/1), Janus (low molecular weight) and dumbbell (high molecular weight) type morphologies were observed. The particles based on ternary blends containing PBTPA-b-PMMA showed core-shell type morphologies (PMMA;core, PBTPA;shell). Degree of engulfment of PMMArich domain increased with the content of the block copolymer. The decrease of domain size was not observed although the block copolymer had a suitable structure as a compatibilizer for the blend. It was also found that the initial concentration of polymer solution had an effect on the final morphology.展开更多
High density polyethylene （HDPE）/polyethylene-block-poly（ethylene glycol） （PE-b-PEG） blend porous membranes were prepared via thermally induced phase separation （TIPS） process using diphenyl ether （DPE） as d...High density polyethylene （HDPE）/polyethylene-block-poly（ethylene glycol） （PE-b-PEG） blend porous membranes were prepared via thermally induced phase separation （TIPS） process using diphenyl ether （DPE） as diluent. The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry （DSC）. By varying the content of PE-b-PEG, the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy （SEM） and wide angle X-ray diffraction （WAXD）. The chemical compositions of whole membranes and surface layers were characterized by elementary analysis, Fourier transform infrared spectroscopy-attenuated total reflection （FTIR-ATR） and X-ray photoelectron spectroscopy （XPS）. Water contact angle, static protein adsorption and water flux experiments were used to evaluate the hydrophilicity, antifouling and water permeation properties of the membranes. It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes. In the investigated range of PE-b-PEG content, the PEG blocks could not aggregate into obviously separated domains in membrane matrix. More importantly, PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation, but also enrich at the membrane surface layer. Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity, protein absorption resistance and water permeation properties, which would be substantially beneficial to HDPE membranes for water treatment application.展开更多
A biodegradable ABBA block copolymer was synthesized via the ring-opening co-polymerization of ~ε-caprolactone(CL, B) and glycolide(A) by means of step polymerization in the presence of ethylene glycol as an initiato...A biodegradable ABBA block copolymer was synthesized via the ring-opening co-polymerization of ~ε-caprolactone(CL, B) and glycolide(A) by means of step polymerization in the presence of ethylene glycol as an initiator and stannous octanoate as a catalyst at 110 ℃ for 48 h. The molecular length of the PCL pre-polymer(BB) could be adjusted by controlling the molar ratio of the ethylene glycol initiator to ε-caprolactone monomer. The structure and the composition of the block copolymer were determined by the weight ratio of the monomer glycolide(A) to PCL pre-polymer(BB). The block copolymers were characterized by ~ 1H NMR, GPC, DSC and X-ray. The results confirm the successful synthesis of an ABBA block copolymer.展开更多
A novel kind of copolymer with ABA-type block structure was synthesized by anionic ring-opening polymerization of beta-butyrolactone (beta-BL) in the presence of a PEG-based dicarboxylates as macroinitiators which wer...A novel kind of copolymer with ABA-type block structure was synthesized by anionic ring-opening polymerization of beta-butyrolactone (beta-BL) in the presence of a PEG-based dicarboxylates as macroinitiators which were prepared by the esterification of aliphatic cyclic anhydride and poly(ethylene glycol) (PEG) oligomers (M-n = 2000, 4000 and 6000) and conversion of potassium dicarboxylates. The resultant copolymers as well as the intermediates were characterized by IR, H-1-NMR and GPC.展开更多
The drug release behavior of degradable polymer--polycaprolactone-poly (ethyleneglycol)block copolymer(PCE) in vitro was investigated by using 5-Fluoro-uracil (5-Fu) asa model drug under a condition of pH 7. 4 at 37C....The drug release behavior of degradable polymer--polycaprolactone-poly (ethyleneglycol)block copolymer(PCE) in vitro was investigated by using 5-Fluoro-uracil (5-Fu) asa model drug under a condition of pH 7. 4 at 37C. It is found that the release rate of 5-Fufrom PCE increased with increasing polyether content of the copolymer. The results showthat the increasing polyether content of the copolymer caused increasing hydrophilicity anddecreasing crystallinity of the PCE copolymer. Thus, the drug release behavior and thedegradable property of the PCE can be controlled by adjusting the composition of thecopolymer.展开更多
By means of the intensity theory of X-ray scattering and the two-phase concept of high polymer, the basic formula of the crystaUinity in block copolymers has been proposed after the corrections of atomic, temperature,...By means of the intensity theory of X-ray scattering and the two-phase concept of high polymer, the basic formula of the crystaUinity in block copolymers has been proposed after the corrections of atomic, temperature, absorption, Lorentz and polarization factor. Application of this method to different type poly (oxyethylene-styrene)block copolymers and the same type block copolymers with different EO contents indicates that the crystallinity in poly (oxyethylene-styrene ) block copolymers increases with the increase of the EO content and decreases in the order: PEO-PS-PEO>PEO-PS>PS-PEO-PS.展开更多
Poly(ethylene oxide) containing azogroups(pre PEO) was prepared by reacting azoisobutyronitrile (AIBN) with poly( ethylene glycol ) (PEG). The molecular weight of pre PEO was depended on the reaction time, the ratio...Poly(ethylene oxide) containing azogroups(pre PEO) was prepared by reacting azoisobutyronitrile (AIBN) with poly( ethylene glycol ) (PEG). The molecular weight of pre PEO was depended on the reaction time, the ratio of PEG to AIBN and the molecular weight of PEG. Pre PEO decomposed in the presence of butylacrylate (BA) monomer to form poly ethylene oxide block butylacrylate copolymers(PEO b PBA). The molecular weights of PEO b PBA and the homopolymer of PBA were proportional to the ratio of BA to pre PEO. The purified block copolymers were charactherized using IR, 1H NMR and GPC.展开更多
Po ly(ethylene terephthalate)-polycaprolactone block copolymer (PCL-b-PET) is a polyester with improved biodegradability. In the present paper, a new direct copolymerization method of epsilon-caprolactone (epsilon-CL)...Po ly(ethylene terephthalate)-polycaprolactone block copolymer (PCL-b-PET) is a polyester with improved biodegradability. In the present paper, a new direct copolymerization method of epsilon-caprolactone (epsilon-CL) and bishydroxyethylene terephthalate (BHET) in the presence of Ti(OBu)(4) was proposed for the synthesis of PCL-b-PET. The PCL-b-PET copolymer was characterized by IR, GPC and H-1-NMR techniques, and the effects of synthesis conditions, such as temperature, reaction time and concentration of catalyst on the copolymerization were discussed.展开更多
The kinetics of ultrasonic degradation of aqueous solution of polyacrylamide（PAM）and poly（ethyleneoxide）（PEO）as well as ultrasonic block copolymerization of aqueous solution of the mixture of PAM/PEOwere studied...The kinetics of ultrasonic degradation of aqueous solution of polyacrylamide（PAM）and poly（ethyleneoxide）（PEO）as well as ultrasonic block copolymerization of aqueous solution of the mixture of PAM/PEOwere studied respectively.The degradation reaction of PEO follows a linear relationship between（P1-P∞）-1and irradiation time,while that of PAM follows a linear relationship between（P1-P∞）-1/2and irradiation time.The structure of the copolymer was identified by IR,NMR and DTA,and the copolymer prepared is a blockone.The copolymer formed by irradiating 1% aqueous solution of PEO/PAM mixture（1:1）for a period of40min.at 18.2 kHz with a sonic intensity corresponding to 2.OA input current on the reversed main circuitamounts to 61.8%.展开更多
Amphiphilic block copolymers poly(LysAA-b-DMS) consisting of a hydrophilic poly(N-α-acrylamide-L-lysine) [poly(LysAA)] segment with different molecular weights and a hydrophobic polydimethylsiloxane (PDMS) segment we...Amphiphilic block copolymers poly(LysAA-b-DMS) consisting of a hydrophilic poly(N-α-acrylamide-L-lysine) [poly(LysAA)] segment with different molecular weights and a hydrophobic polydimethylsiloxane (PDMS) segment were prepared as follows. The precursor copolymer poly(Boc-LysAA-OtBu-b-PDMS) was obtained from radical polymerization of N-α-acrylamide-N-ε-tert-butoxycarbonyl-L-lysine-tert-butylester (Boc-LysAA-OtBu) initiated with 4,4’-azobis(polydimethylsiloxane 4-cyanopentanoate) (azo-PDMS) with the molecular weight of PDMS Mw = 4.3 × 103 in the presence of 2-mercaptoethanol (2-ME) as a chain-transfer agent. Removal of the protecting groups of the precursor copolymer was carried out in 80% trifluoroacetic acid aqueous solution to give poly(LysAA-b-DMS)-1-3. The weight average molecular weight of poly(LysAA-b-DMS)-1-3 was Mw = 1.02 × 104 – 2.52 × 104. From the 1H-NMR and fluorescence spectra measurements, poly(LysAA-b-DMS)-1-3 was determined to self-organize and form core-shell micelles in water. The critical micelle concentration (CMC) increased to 1000 - 4000 mg·L–1 with increasing molar ratio of the poly(LysAA) segment from 0.42 to 0.65. From morphological analysis with a scanning probe microscope (SPM), poly(LysAA-b-DMS) has microphase-separated structures made up of hydrophilic and hydrophobic regions with the domain size ranging from several tens to several hundreds of nanometers. Inhibition of thrombin activity of poly(LysAA-b-DMS) was evaluated from the Michaelis constant (KM) and catalytic activity (kcat) for the enzymatic reaction of thrombin and synthetic substrate S-2238 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.10 - 0.11 mM and 4.04 × 105 – 4.26 × 105 min–1, respectively. Fibrinolytic activity was also verified from the transformation of plasminogen to plasmin by tissue plasminogen activator (t-PA) using synthetic substrate S-2251 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.07 mM and 5.73 × 106 –5.95 × 106 min–1, respectively.展开更多
基金the National Natural Science Foundation of China(Nos.21722402 and 21674015).
文摘Copolymerization is a commonly employed method for optimizing the properties of polymer materials.Incorporating ether segments into polyesters main chain to obtain polyether-polyester copolymers is an effective strategy to realize the integration of multiple properties of polyester and polyether,and to develop more high-performance,multi-purpose polymer materials.Herein,the synthesis of poly(ether-ester)s is accessible by employing the biphenyl-linked heterodinuclear salen Cr-AI complex in the presence of PPNCI for the copolymerization of epoxides and£-caprolactone(CL).Monitoring the copolymerization process reveals that catalyst 1 exhibited good performance for the copolymerization of epoxides and CL,affording copolymers with a gradient sequence structure.The dynamic thermomechanical analysis(DMA)study indicates the obtained poly(ether-ester)s possess enhanced flexibility compared with the block copolymers or blend of PPO and PCL homopolymers with the same ratio.This study provides a theoretical basis for the preparation of high-performance polymer materials.
文摘Segmented block copolymer based on nylon6 （N6） and polyethylene oxide （PEO） with stochiometric ratio was synthesized via a two-step process. The first step represents end capping of N6 in the presence of adipic acid leading to carboxy terminated N6, and the second one is polycondensation of the latter product with PEO in the presence of catalyst and thermostabilizer to form a high molecular weight multi-block copolymer. Several methods were applied to characterize the synthesized copolyrner such as Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, differential thermal analysis, differential scanning calorimetry, X-ray diffraction and atomic force microscopy. The obtained results confirmed the multi-block structure for copolymer with a very high degree of micro-phase separation. Atomic force microscopy micrographs indicated that the morphology was the dispersion of high stiffness nanostructured polyamide （PA） domains in the amorphous region of PEO matrix, which can be very important in their performance for membrane processes.
基金financially supported by the Academic Development Fund of Rajabhat Maha Sarakham University(PhD scholarship for D.Pholharn)the Division of Research Facilitation and Dissemination,Mahasarakham University(2017)
文摘In the present work, poly（propylene glycol） （PPG） was block copolymerized to form polylactide-poly（propylene glycol）-polylactide （PL-PPG-PL） triblock copolymers for preparing flexible stereocomplex PL （scPL） blend films. The scPL blend films were prepared by solution blending of poly（L-lactide）-PPG-poly（L-lactide） （PLL-PPG-PLL） and poly（D-lactide）- PPG-poly（D-lactide） （PDL-PPG-PDL） triblock copolymers before film casting. The influences of PL end-block lengths （2 ×10^4 and 4×10^4 g/tool） and blend ratios （75/25, 50/50 and 25/75 W/W） on the stereocomplexation and mechanical properties of the blend films were evaluated. From DSC and WAXD results, the 50/50 blend films had complete stereocomplexation. Phase separation between the scPL and PPG phases was not observed from their SEM images. The tensile stress and elongation at break increased with the sterecomplex crystallinities and PL end-block lengths. The PPG middle-blocks enhanced elongation at break of the scPL films. The results showed that the PL-PPG-PL triblock structures did not affect stereocomplexation of the PLL/PDL block blending. In conclusion, the phase compatibility and flexibility of the scPL films were improved by PPG block copolymerization.
基金support from the National Natural Science Foundation of China(No. 20134020)the Visiting Scholar Project of Shandong Province of China(No.20081001)the Science Research Fund of Shandong Jiaotong University of China(No.Z200802)
文摘Novel Y-shaped block copolymers of poly（ethylene glycol） and poly（N-isopropylacrylamide）, PEG-b-（PNIPAM）2, were successfully synthesized through atom transfer radical polymerization （ATRP）. A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly（ethylene glycol） monomethyl ether （PEG）. The copolymers were obtained via the ATRP ofN-isopropylacrylamide （NIPAM） at 30℃ with CuCl/Me6TREN as a catalyst system and DMF/H2O （v/v = 3：1） mixture as solvent. The resulting copolymers were characterized by gel permeation chromatography （GPC） and ^1H NMR. These block copolymers show controllable molecular weights and narrow molecular weight distributions （PDI 〈 1.15）. Their phase transition temperatures and the corresponding enthalpy changes in aqueous solution were measured by differential scanning calorimetry （DSC）. As a result, the phase transition temperature of PEG45-b-（PNIPAM55）2 is higher than that of PNIPAM, however, the corresponding enthalpy change is much lower, indicating the significant influence of the macromolecular composition and architecture on the phase transition.
基金financially supported by the National Natural Science Foundation of China(Nos.51303176,51873209,51573178,and 51773194)the National Key Research and Development Program of China(No.2016YFB0302500)
文摘The effect of the architecture of poly(ethylene glycol)/poly(L-lactide)(PEG/PLLA) block copolymers on the non-isothermal crystallization behaviors of PLLA blocks was investigated by differential scanning calorimetry(DSC) and wide angle X-ray diffraction(WAXD). 1-Arm MPEG-b-PLLA and 4-arm PEG-b-PLLA(4PEG-b-PLLA) were synthesized by the ring-opening polymerization of Llactide in the presence of poly(ethylene glycol) methyl ether(MPEG) and 4-arm poly(ethylene glycol)(4PEG). 4-Arm PLLA-b-MPEG(4PLLA-b-PEG) was synthesized by coupling 4-arm PLLA and MPEG. The WAXD results indicated that the crystalline structure of PLLA blocks did not alter due to the different chain architectures. The average values of Avrami index(ˉn) were all above 4, which indicated that the nucleation mechanism of PLLA blocks was heterogeneous nucleation, regardless of the architectures. The overall crystallization rates were decreased markedly as following: MPEG-b-PLLA > 4PEG-b-PLLA > 4PLLA-b-PEG, ascribed to the different confinement by PEG blocks and to the steric hindrance of chain architectures. Therefore, the crystallization of PLLA blocks became more difficult and the crystallization activation energy of the PLLA blocks increased due to the confinement of chain architectures.
文摘Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile） （PPEN） in the presence of chlorobenzcne/N-methyl pyrrolidone （NMP） as solvents. The products were characterized by FTIR, ^1H NMR and gel permeation chromatography. Differential scanning calorimetry analysis indicated that the block copolymers showed separated microphase.
基金Funded by the National Natural Science Foundation of China(No.50873071)the Teaching and Research Award Program for Outstanding Young Professors in Higher Education Institute,MOE,China
文摘A series of aliphatic biodegradable poly（ether-ester）s based on poly（butylene succinate）（PBS）as hard segment and poly（tetramethylene oxide）（PTMO,M_n=1 000 g/mol） as soft segment were synthesized.The composition dependence of thermal behavior,morphology and mechanical properties was investigated by differential scanning calorimetry（DSC）,atomic force microscopy（AFM）,and tensile testing.The crystallization temperature（T_c） and melting temperature（T_m） of the PBS block within poly（ether-ester）s decrease steadily at first,but decrease sharply with PTMO content above 50 wt%.Two crystallization peaks were detected for PTMO in PBSPTMO60 sample,suggesting the occurrence of fractionated crystallization.The crystallization enthalpies（△H_c） and melting enthalpies（△H_m） of PBS block decrease at first,then increase as PTMO content increases further.AFM has demonstrated that phase-separated morphology transforms from a phase of continuous hard matrix to one of continuous soft matrix containing isolated hard domain as PTMO content is increased.Finally,the results of tensile testing show that the poly（ether-ester）s present the behavior of plastics when PTMO content is below 40 wt%,and of thermoplastic elastomers with PTMO content above 50 wt%.By varying the composition of copolymer,the aliphatic poly（ether-ester）s plastics,or especially biodegradable aliphatic poly（ether-ester）s thermoplastic elastomers can be obtained.
基金the National Natural Science Foundation of China for the financial supports of this work(Nos.51973113,51133003 and 21774078)。
文摘In this contribution, we reported a novel synthesis of block copolymer networks composed of poly(ε-caprolactone)(PCL) and polyethylene(PE) via the co-hydrolysis and condensation of α,ω-ditriethoxylsilane-terminated PCL and PE telechelics. First, α,ω-dihydroxylterminated PCL and PE telechelics were synthesized via the ring-opening polymerization of ε-caprolactone and the ring-opening metathesis polymerization of cyclooctene followed by hydrogenation of polycyclooctene. Both α,ω-ditriethoxylsilane-terminated PCL and PE telechelics were obtained via in situ reaction of α,ω-dihydroxyl-terminated PCL and PE telechelics with 3-isocyanatopropyltriethoxysilane. The formation of networks was evidenced by the solubility and rheological tests. It was found that the block copolymer networks were microphase-separated. The PCL and PE blocks still preserved the crystallinity. Owing to the formation of crosslinked networks, the materials displayed shape memory properties. More importantly, the combination of PCL with PE resulted that the block copolymer networks had the triple shape memory properties, which can be triggered with the melting and crystallization of PCL and PE blocks. The results reported in this work demonstrated that triple shape memory polymers could be prepared via the formation of block copolymer networks.
基金Supported by the National Natural Science Foundation of China(21776126)the National Basic Research Program of China(2015CB655301)+1 种基金the Natural Science Foundation of Jiangsu Province(BK20150063)partially supported by the Open Fund of State Key Laboratory of Separation Membranes and Membrane Processes(M1-201702).
文摘Fouling resistance of ultrafiltration(UF) membranes is critical for their long-term usages in terms of stable performance, so convenient approaches to prepare fouling-resistant membranes are always anticipated. Herein, we demonstrate the facile fabrication of antifouling polysulfone-block-poly(ethylene glycol)(PSF-b-PEG, SFEG)composite membranes. SFEG layer was coated onto macroporous supports and cavitated by immerging them in acetone/n-propanol following the mechanism of selective swelling induced pore generation. Thus-produced SFEG membranes possessed high permeance and excellent mechanical strength. Meanwhile, the structures and separation performances of the SFEG layers can be continuously tuned through simply changing swelling durations. More importantly, the hydrophilic PEG chains were spontaneously enriched onto the pore walls through swelling treatment, endowing intrinsic antifouling property to the SFEG membranes. Bovine serum albumin(BSA)/humic acid(HA) fouling tests proved the prominent fouling resistance of SFEG membranes, and the fouling resistance is expected to be long-standing because of the firm connection between PEG chains and PSF matrix by covalent bonding.
基金the China Petrochemical Corporation and the Fundamental Research Funds for the Central Universities(Nos.XK1802-2 and XK1802-1).
文摘Poly(styrene-6-isobutylene-6-styrene)triblock copolymer(SIBS),a kind of thermoplastic elastomer with biocompatibility and biostability containing fully saturated soft segments,could be synthesized via living cationic copolymerization.A novel poly[(styrene-co-methylstyrene)-b-isobutylene-b-(styrene-co-methylstyrene)]-g-polytetrahydrofuran(M-SIBS-g-PTHF)block graft copolymer was prepared to increase the polarity and service temperature of SIBS by grafting polar PTHF segments onto SIBS.A series of the above block graft copolymers with average grafting numbers from 2 to 6 and molecular weights of PTHF branches ranging from 200 g·mol^(-1)to 4200 g·mol^(-1)were successfully synthesized via living cationic ring-opening polymerization of tetrahydrofuran(THF)coinitiated by AgCI04.The introduction of PTHF branches led to an obvious microphase separation due to thermodynamic incompatibility among the three kinds of segments of polyisobutylene(PIB),polystyrene(PS)and PTHF.Moreover,the microphase separation promotes the rearrangement of PTHF branches to form the nanocrystallization-locked physically cross-linked network after storage at room temperature for 2 months,leading to insolubility of the copolymers even in good solvents.The melting temperature and enthalpy of PTHF nanocrystallization locked in hard domains of M-SIBS-g5-PTHF-1.1k block graft copolymer increased remarkably up to 153℃and 117.0 J·g^(-1)by 23℃and 11.6 J·g^-1(respectively after storage for long time.Storage modulus(G′)is higher than loss modulus(G″)of M-SIBS-g-PTHF block graft copolymer at temperatures ranging from 100℃to 180℃,which is much higher than those of the SIBS triblock copolymer.To the best of our knowledge,this is the first example of high performance M-SIBS-g-PTHF block graft copolymers containing segments of PIB,PS and PTHF with nanocrystallization-locked architecture.
文摘Micron-sized polymer particles from single poly(4-butyltriphenylamine) (PBTPA) homopolymer, binary polymer blend [PBTPA/poly(methyl methacrylate) (PMMA)], and ternary polymer blend (PBTPA/PBTPA-b-PMMA/PMMA) via a solvent evaporation method, and the surface morphologies and inside structure of resulting particles were investigated. Spherical homopolymer particles with smooth surface were resulted from PBTPA with low molecular weight. In the case of binary blends (PBTPA/PMMA = 1/1), Janus (low molecular weight) and dumbbell (high molecular weight) type morphologies were observed. The particles based on ternary blends containing PBTPA-b-PMMA showed core-shell type morphologies (PMMA;core, PBTPA;shell). Degree of engulfment of PMMArich domain increased with the content of the block copolymer. The decrease of domain size was not observed although the block copolymer had a suitable structure as a compatibilizer for the blend. It was also found that the initial concentration of polymer solution had an effect on the final morphology.
基金supported by the 863 program(No.2006AA03Z233)973 program(No.2009CB623402) of China
文摘High density polyethylene （HDPE）/polyethylene-block-poly（ethylene glycol） （PE-b-PEG） blend porous membranes were prepared via thermally induced phase separation （TIPS） process using diphenyl ether （DPE） as diluent. The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry （DSC）. By varying the content of PE-b-PEG, the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy （SEM） and wide angle X-ray diffraction （WAXD）. The chemical compositions of whole membranes and surface layers were characterized by elementary analysis, Fourier transform infrared spectroscopy-attenuated total reflection （FTIR-ATR） and X-ray photoelectron spectroscopy （XPS）. Water contact angle, static protein adsorption and water flux experiments were used to evaluate the hydrophilicity, antifouling and water permeation properties of the membranes. It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes. In the investigated range of PE-b-PEG content, the PEG blocks could not aggregate into obviously separated domains in membrane matrix. More importantly, PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation, but also enrich at the membrane surface layer. Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity, protein absorption resistance and water permeation properties, which would be substantially beneficial to HDPE membranes for water treatment application.
文摘A biodegradable ABBA block copolymer was synthesized via the ring-opening co-polymerization of ~ε-caprolactone(CL, B) and glycolide(A) by means of step polymerization in the presence of ethylene glycol as an initiator and stannous octanoate as a catalyst at 110 ℃ for 48 h. The molecular length of the PCL pre-polymer(BB) could be adjusted by controlling the molar ratio of the ethylene glycol initiator to ε-caprolactone monomer. The structure and the composition of the block copolymer were determined by the weight ratio of the monomer glycolide(A) to PCL pre-polymer(BB). The block copolymers were characterized by ~ 1H NMR, GPC, DSC and X-ray. The results confirm the successful synthesis of an ABBA block copolymer.
文摘A novel kind of copolymer with ABA-type block structure was synthesized by anionic ring-opening polymerization of beta-butyrolactone (beta-BL) in the presence of a PEG-based dicarboxylates as macroinitiators which were prepared by the esterification of aliphatic cyclic anhydride and poly(ethylene glycol) (PEG) oligomers (M-n = 2000, 4000 and 6000) and conversion of potassium dicarboxylates. The resultant copolymers as well as the intermediates were characterized by IR, H-1-NMR and GPC.
文摘The drug release behavior of degradable polymer--polycaprolactone-poly (ethyleneglycol)block copolymer(PCE) in vitro was investigated by using 5-Fluoro-uracil (5-Fu) asa model drug under a condition of pH 7. 4 at 37C. It is found that the release rate of 5-Fufrom PCE increased with increasing polyether content of the copolymer. The results showthat the increasing polyether content of the copolymer caused increasing hydrophilicity anddecreasing crystallinity of the PCE copolymer. Thus, the drug release behavior and thedegradable property of the PCE can be controlled by adjusting the composition of thecopolymer.
文摘By means of the intensity theory of X-ray scattering and the two-phase concept of high polymer, the basic formula of the crystaUinity in block copolymers has been proposed after the corrections of atomic, temperature, absorption, Lorentz and polarization factor. Application of this method to different type poly (oxyethylene-styrene)block copolymers and the same type block copolymers with different EO contents indicates that the crystallinity in poly (oxyethylene-styrene ) block copolymers increases with the increase of the EO content and decreases in the order: PEO-PS-PEO>PEO-PS>PS-PEO-PS.
文摘Poly(ethylene oxide) containing azogroups(pre PEO) was prepared by reacting azoisobutyronitrile (AIBN) with poly( ethylene glycol ) (PEG). The molecular weight of pre PEO was depended on the reaction time, the ratio of PEG to AIBN and the molecular weight of PEG. Pre PEO decomposed in the presence of butylacrylate (BA) monomer to form poly ethylene oxide block butylacrylate copolymers(PEO b PBA). The molecular weights of PEO b PBA and the homopolymer of PBA were proportional to the ratio of BA to pre PEO. The purified block copolymers were charactherized using IR, 1H NMR and GPC.
基金This work was supported by 863 Programme of China No.715-002-0210 and the National Natural Science Foundation of China(No.59773022).
文摘Po ly(ethylene terephthalate)-polycaprolactone block copolymer (PCL-b-PET) is a polyester with improved biodegradability. In the present paper, a new direct copolymerization method of epsilon-caprolactone (epsilon-CL) and bishydroxyethylene terephthalate (BHET) in the presence of Ti(OBu)(4) was proposed for the synthesis of PCL-b-PET. The PCL-b-PET copolymer was characterized by IR, GPC and H-1-NMR techniques, and the effects of synthesis conditions, such as temperature, reaction time and concentration of catalyst on the copolymerization were discussed.
文摘The kinetics of ultrasonic degradation of aqueous solution of polyacrylamide（PAM）and poly（ethyleneoxide）（PEO）as well as ultrasonic block copolymerization of aqueous solution of the mixture of PAM/PEOwere studied respectively.The degradation reaction of PEO follows a linear relationship between（P1-P∞）-1and irradiation time,while that of PAM follows a linear relationship between（P1-P∞）-1/2and irradiation time.The structure of the copolymer was identified by IR,NMR and DTA,and the copolymer prepared is a blockone.The copolymer formed by irradiating 1% aqueous solution of PEO/PAM mixture（1:1）for a period of40min.at 18.2 kHz with a sonic intensity corresponding to 2.OA input current on the reversed main circuitamounts to 61.8%.
文摘Amphiphilic block copolymers poly(LysAA-b-DMS) consisting of a hydrophilic poly(N-α-acrylamide-L-lysine) [poly(LysAA)] segment with different molecular weights and a hydrophobic polydimethylsiloxane (PDMS) segment were prepared as follows. The precursor copolymer poly(Boc-LysAA-OtBu-b-PDMS) was obtained from radical polymerization of N-α-acrylamide-N-ε-tert-butoxycarbonyl-L-lysine-tert-butylester (Boc-LysAA-OtBu) initiated with 4,4’-azobis(polydimethylsiloxane 4-cyanopentanoate) (azo-PDMS) with the molecular weight of PDMS Mw = 4.3 × 103 in the presence of 2-mercaptoethanol (2-ME) as a chain-transfer agent. Removal of the protecting groups of the precursor copolymer was carried out in 80% trifluoroacetic acid aqueous solution to give poly(LysAA-b-DMS)-1-3. The weight average molecular weight of poly(LysAA-b-DMS)-1-3 was Mw = 1.02 × 104 – 2.52 × 104. From the 1H-NMR and fluorescence spectra measurements, poly(LysAA-b-DMS)-1-3 was determined to self-organize and form core-shell micelles in water. The critical micelle concentration (CMC) increased to 1000 - 4000 mg·L–1 with increasing molar ratio of the poly(LysAA) segment from 0.42 to 0.65. From morphological analysis with a scanning probe microscope (SPM), poly(LysAA-b-DMS) has microphase-separated structures made up of hydrophilic and hydrophobic regions with the domain size ranging from several tens to several hundreds of nanometers. Inhibition of thrombin activity of poly(LysAA-b-DMS) was evaluated from the Michaelis constant (KM) and catalytic activity (kcat) for the enzymatic reaction of thrombin and synthetic substrate S-2238 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.10 - 0.11 mM and 4.04 × 105 – 4.26 × 105 min–1, respectively. Fibrinolytic activity was also verified from the transformation of plasminogen to plasmin by tissue plasminogen activator (t-PA) using synthetic substrate S-2251 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.07 mM and 5.73 × 106 –5.95 × 106 min–1, respectively.
