Objective:To compare 16% carbamide peroxide(CP)with a higher concentration of hydrogen peroxide(HP)for bleaching teeth in office or at-home to erase tetracycline stains on teeth.Materials and methods:In a randomized,s...Objective:To compare 16% carbamide peroxide(CP)with a higher concentration of hydrogen peroxide(HP)for bleaching teeth in office or at-home to erase tetracycline stains on teeth.Materials and methods:In a randomized,self-controlled clinical trial,we assigned eligible subjects to group A with 40% HP compared with 16% CP or group B with 45% CP compared with 16% CP on the split maxillary arch and followed the manufacturers’instructions.Tooth color changes were measured with vita 3D-bleached guide and colorimeter at baseline and three-time assessment.Tooth sensitive intensity was evaluated using numeric rating scales,and oral soft and hard tissue examination was recorded.Patient satisfaction survey was conducted at the last tooth color evaluation.Results:There were 20 subjects enrolled.The color changes by the end of the study were A1(40% HP)=8.22,A2(16% CP)=8.20,B1(45% CP)=11.27,B2(16% CP)=8.26 respectively.All groups experienced significant shade reductions by bleaching,the 45% CP group had significantly greatest color changes compared with the other groups(p=0.03).For tooth sensitivity evaluation,significant differences were observed in 40% HP group(p=0.01),but with mild level.None patients suffered oral soft or hard tissue abnormalities before and after treatment.Patients were more in favor of using 45% CP according to the questionnaire results.Conclusion:The 3 whitening agents were effective and safe for the whitening of tetracycline-stained teeth,the 45% CP agent had quicker whitening efficacy with low tooth sensitivity and positive feedback.Clinical significance:45% of high-concentration CP whitener by at-home using,brought faster and superior efficacy to bleaching tetracycline-stained teeth while had the equal intensity of tooth sensitivity.展开更多
The effectiveness of ClO_2 bleaching as a replacement for conventional Cl_2 bleaching,which is intensively practiced in developing countries,to reduce polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs)in non...The effectiveness of ClO_2 bleaching as a replacement for conventional Cl_2 bleaching,which is intensively practiced in developing countries,to reduce polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs)in non-wood pulp and paper mills has not been field tested.The first field study was performed to investigate PCDD/F variations when ClO_2 bleaching was used as a substitute for conventional Cl_2 bleaching in a non-wood pulp and paper mill.It was found that the PCDD/F toxic equivalents(TEQs)in solid and effluent samples were approximately 1.3–14.9 times lower when ClO_2 bleaching was used instead of the conventional Cl_2 bleaching.2,3,7,8-Substituted tetrachlorinated dibenzofurans(2,3,7,8-TCDF)were the dominant contributors to total PCDD/F TEQs in samples from the investigated mill when using conventional Cl_2 bleaching.The formation amounts of 2,3,7,8-TCDF were reduced from 1.56–2.76 pg TEQ/g to 0.02–0.32 pg TEQ/g in solid samples when ClO_2 bleaching was used instead of the conventional Cl_2 bleaching.The replacement of Cl_2 with ClO_2 might decrease the chlorination reactions of dibenzofuran as potential precursors,and thus reduce the formation amounts of 2,3,7,8-TCDF.The results could provide important knowledge for suggesting the best available technique for PCDD/F reduction for non-wood pulp and paper mills in developing countries.展开更多
Coral reefs in the Gulf of Mannar(GoM)and Palk Bay regions are facing potential threats from climate change,sedimentation and anthropogenic activities.Considerably,coral reefs in these two regions are highly damaged d...Coral reefs in the Gulf of Mannar(GoM)and Palk Bay regions are facing potential threats from climate change,sedimentation and anthropogenic activities.Considerably,coral reefs in these two regions are highly damaged due to frequent bleaching events caused by increased sea surface temperature(SST)recorded over the past two decades.Recently,during February to May 2019,mass bleaching event of corals was documented again in GoM and Palk Bay regions due to increased sea surface temperatures ranged between 32°C to 36°C.Despite of completely bleached corals,some coral colonies of the same bleached coral species have displayed adaptive bleaching pattern(ABP)for survival.This incidence is displayed by the symbiotic zooxanthellae to protect coral polyps from environmental stress such as elevated temperatures.These observations infer that coral colonies with preferential bleaching pattern ability would serve as environmental stress resisting coral colonies which can be used for restoration activities and cryopreservation.Further studies are needed to explain the potential mechanisms or specific environmental drivers responsible for ABP.展开更多
Bentonite produced in Xiazijie, Xinjiang (China) was characterized by X-ray diffraction (XRD), dif- ferential thermal analysis (DTA), thermogravimetric analysis (TG) and cation exchange capacity (CEC). The ben- tonite...Bentonite produced in Xiazijie, Xinjiang (China) was characterized by X-ray diffraction (XRD), dif- ferential thermal analysis (DTA), thermogravimetric analysis (TG) and cation exchange capacity (CEC). The ben- tonite is composed of dioctahedral montmorillonite with predominant quantity, certain amounts of quartz, feldspar and illite and minor amounts of kaolinite, gypsum, etc. The raw bentonite has a CEC of 0.6497 meq·g-1 and allows to be characterized as typical sodium bentonite. In order to bleach cottonseed oil, optimum conditions for sulfuric acid activation of the raw bentonites were investigated, which were obtained by selecting various acid strength, at 96—98℃ and activating for 4h with 1︰2 solid-liquid ratio. The acid activation bentonites were suitable for decol- orization of cottonseed oil through removing carotene and chlorophyll. The bleaching capabilities of different pig- ments with activated bentonite with treatment of 25% sulfuric acid were 70.3%, 73.1%, 83.2%, 81.8% and 88.9%, respectively. Bleaching with acid activated bentonite gave oils lower peroxide values and acid values.展开更多
This in vitrostudy aims to evaluate the crystal and surface microstructure of dental enamel after cold-light bleaching treatment. Twelve sound human premolars were cross-split into four specimens, namely, mesio-buccal...This in vitrostudy aims to evaluate the crystal and surface microstructure of dental enamel after cold-light bleaching treatment. Twelve sound human premolars were cross-split into four specimens, namely, mesio-buccal （Group LP）, disto-buccal （Group P）, mesio-lingual （Group NP） and disto-lingual （Group L） specimens. These four groups were treated using the standard cold-light bleaching procedure, a bleaching agent, a peroxide-free bleaching agent and cold-light, respectively. Before and after treatment, all specimens were analyzed by high-resolution, micro-area X-ray diffraction and scanning electron microscopy. Using a spectrometer, tooth color of all specimens was measured before and after treatment. The phase of the enamel crystals was identified as hydroxyapatite and carbonated hydroxyapatite. After treatment, specimens in Groups LP and P showed significantly weaker X-ray diffraction peaks, significant reduction in crystal size and crystallinity, significant increase in L~ but decrease in a＊ and b＊, and obvious alterations in the surface morphology. However, specimens in Groups NP and L did not show any significant changes. The cold-light bleaching treatment leads to demineralization in the enamel surface. The acidic peroxide-containing bleaching agent was the major cause of demineralization, whereas cold-light did not exhibit significant increase or decrease effect on this demineralization.展开更多
This work represents the extraction of oil with high free fatty acid content from spent bleaching earth using sub-critical water technology as a greener production pathway. The extraction efficiencies under different ...This work represents the extraction of oil with high free fatty acid content from spent bleaching earth using sub-critical water technology as a greener production pathway. The extraction efficiencies under different conditions were investigated. The studied parameters include temperatures in the range of 180 to 270°C, the feed to solventfeed-to-solvent (in this case water) ratio (1:1, 1:2, 1:3, 1:4 and 1:5) and extraction times in the range of 5-60 minutes. The results showed that the optimum temperature, feed to solventfeed-to-solvent ratio, and extraction time were 270°C, 1:3, and 20 minutes, respectively. In another experiment, the extracted free fatty acids were converted into mono-, di-, and triglycerides through esterification with glycerol to increase the value added of the extracted products. The kinetics of the extraction process was found to be corresponding to an irreversible consecutive unimolecular-type first order reaction, consisting of the extraction step followed by the decomposition reaction step. Both reaction rates of extraction and decomposition were estimated using the reaction rate equations utilizing the nonlinear regression method. The apparent activation energy was calculated to be 46.1 kJ·mol-1. This result indicates a diffusion controlled reaction. For more exploration and deep understanding of the extraction mechanism, other thermodynamic parameters were also calculated and analyzed including,ΔH#, ΔS#, and ΔG# of the extraction step.展开更多
The available data have shown that acid-leached clays had sites for adsorption of impurities in oils. Data obtained on residual impurities in cotton and sunflower-seed oils bleached with the same clay materials produc...The available data have shown that acid-leached clays had sites for adsorption of impurities in oils. Data obtained on residual impurities in cotton and sunflower-seed oils bleached with the same clay materials produced linear Langmuir and Freundlich isotherms. The increase in constant, k with increase in both temperature of thermal activation and concentration of acid used to leach the clay, suggests that bleaching efficiency increased. The value of n decreased with increase in temperature of activation and concentration of acid used to leach the clay suggesting that bleaching capacity increased. The mineral compositions of the clays influenced their surface, structural and bleaching properties.展开更多
Bleaching of black human hair has been studied systematically. On the basis of experimental data the technology of human hair bleaching through five processes was established. The optimum technology of improving the w...Bleaching of black human hair has been studied systematically. On the basis of experimental data the technology of human hair bleaching through five processes was established. The optimum technology of improving the whiteness and reducing damage on fibers has been found. The technology can provide good luster,smooth handle and relatively high strength retention to human hair used for wigs or drama articles, meeting the needs of people better. Moreover, it also has important reference value to bleaching of other colored fibers.展开更多
Coral reefs produce atmospheric dimethylsulfide (DMSa) which oxidises to non-sea-salt (nss) sulfate aerosols, precursors of cloud condensation nuclei (CCN) and low level cloud (LLC), reducing solar radiation and regul...Coral reefs produce atmospheric dimethylsulfide (DMSa) which oxidises to non-sea-salt (nss) sulfate aerosols, precursors of cloud condensation nuclei (CCN) and low level cloud (LLC), reducing solar radiation and regulating sea surface temperatures (SSTs). Here we report measurements of solar radiation, SST, LLC, DMS flux, , and rainfall before, during and after a major coral bleaching event at Magnetic Island in the central Great Barrier Reef (GBR). Measurements are compared with those made at the nearby fringing reef of Or-pheus Island where coral bleaching did not occur. Extreme solar radiation levels occurred from November to late January and could have reflected cloud radiative effects that increased downwelling of solar radiation. High levels of LLC often coincided with high periodic fluxes of DMS from the unbleached coral reef at Orpheus Island (e.g. 14 - 20 μmol·m-2·d-1), in direct contrast to the very low fluxes of DMS that were emitted from the bleached, human-impacted Magnetic Island fringing reef (nd-0.8 μmol·m-2·d-1) when SSTs were >30°C. Continuous SSTs measurements at the Magnetic Island reef revealed various heating and cooling periods, interspersed with stable SSTs. Cooling periods (negative climate feedback) ranged from -1°C to -3°C (7 day mean -1.6°C), and often seemed to occur during low tides, periodic pulses of DMS flux and LLC, keeping SSTs °C. In contrast warming periods of +1°C to +3°C (positive climate feedback, 7 day mean +1.52°C), seemed to occur during increasing tides, decreasing DMS flux and low to medium levels of LLC which increased solar radiation and caused SSTs over 30°C and corals to bleach. Alternation between these two states or types of feedback is indicated in this research and may be a function of enhanced scattering of solar radiation from nss-sulfate aerosols that originate from oxidation of DMSa produced from the coral reefs in the GBR. The net radiative forcing from clouds can be as high as four times as large as the radiative forcing from a doubling of CO2 levels in the atmosphere, which needs to be taken into account when ascribing coral bleaching events in the GBR solely to GHG warming. Further studies are needed to more critically assess the importance of this GBR coral reef-cloud feedback to the climate of northern Australia and the western Pacific, where the greatest biomass of coral reefs occurs.展开更多
The optimum bleaching parameters (clay dose and bleaching time) for palm kernel oil were determined using alkaline activated clay locally sourced in Nigerian. Activation was carried out using NaOH and KOH. The raw and...The optimum bleaching parameters (clay dose and bleaching time) for palm kernel oil were determined using alkaline activated clay locally sourced in Nigerian. Activation was carried out using NaOH and KOH. The raw and activated clay samples were characterized using XRD and XRF. Bleached oil was analyzed for % colour reduction (%CR) and percentage free fatty acid (FFA) content before and after bleaching. Alkaline activation resulted to total dissolution of Mg2+ and Ca2+ ions in the octahedral sheet. The activation also affected the tetrahedral sheet by reducing the % composition of the silica and alumina ion after the modification. The results showed that alkaline activation had significant effect on mineralogical and chemical composition of the clay samples. The optimum bleaching conditions (clay dosage and bleaching time) of 3%/weight of oil and 30 mins resulted in 33.3% CR and %FFA of 2.2. It was discovered that NaOH activated clay resulted to higher %CR while KOH activated clay shows affinity for reduced %FFA but at higher concentration of 5 M. This research has further established that alkaline activated clays are feasible alternative for acid activated clays in vegetable oil bleaching.展开更多
The preparation of a nonlinear directional coupler in polymer PMMA/DR1 film by photobleaching is studied. We find it easier to obtain a required coupling length by controlling photo bleaching time than by controlling ...The preparation of a nonlinear directional coupler in polymer PMMA/DR1 film by photobleaching is studied. We find it easier to obtain a required coupling length by controlling photo bleaching time than by controlling the dimension of the coupler. The transmittance of each arm is measured when the pulse input light energy changes in our experiment. The experimental results show that the coupling length will change with the intensity of input light due to optical nonlinearities of the polymer PMMA/DR1 at 1 064 nm.展开更多
In this study,Mg O was partially used as an alkali source in the peroxide bleaching process of bleached chemi-thermomechanical pulp(BCTMP).The effects of substitution percentage of Mg O for Na OH on the bulk,optical,a...In this study,Mg O was partially used as an alkali source in the peroxide bleaching process of bleached chemi-thermomechanical pulp(BCTMP).The effects of substitution percentage of Mg O for Na OH on the bulk,optical,and physical properties of bleached pulp,and the main effluent characteristics were analyzed.In addition,the influencing mechanism of Mgbased alkali on the strength properties of the BCTMP was further investigated.Strength properties of the BCTMPs were investigated as a function of charge characteristics,fiber morphology,surface lignin content,relative bonding area,and hydrogen bonds of the BCTMP.The results showed that cationic demand(CD) and chemical oxygen demand(COD_(Cr)) of the bleaching effluent decreased as the substitution percentage of Mg O for Na OH increased; meanwhile,the bulk and optical properties of the BCTMP increased.Nevertheless,the strength properties(tensile,tear,and burst indices) of the bleached pulp decreased as the substitution percentage of Mg O for Na OH increased.The decrease in the fiber charge density and increase in the surface lignin content affected the fiber swelling,resulting in a decline in pulp interfibers bonding strength and further loss of the tensile and burst indices.展开更多
We investigated bleached human hair by FT-IR microspectroscopy and chemical imaging. The cross sectioned hair is approximately 90 μm in diameter, showed cuticle and cortex in chemical imaging. Differential amide I/II...We investigated bleached human hair by FT-IR microspectroscopy and chemical imaging. The cross sectioned hair is approximately 90 μm in diameter, showed cuticle and cortex in chemical imaging. Differential amide I/II absorbance ratio and broadening amide I band between in the cortex and cuticle were confirmed in FT-IR microspectroscopy and chemical imaging. The cystine monoxide band from the products of disulfide oxidation of the amino acid cystine is associated with hair damaging during bleaching process. With increase bleaching time, the band for cystine monoxide shows more intense and larger area in chemical image. The spatially chemical change was investigated in detail by FT-IR microspectroscopy and chemical imaging during the bleached process.展开更多
The aim of this study was to investigate the effects of two bleaching systems on micro hardness, surface roughness and color stability of two novel dental composites. Ormocer based restorative Admira and nano-filled c...The aim of this study was to investigate the effects of two bleaching systems on micro hardness, surface roughness and color stability of two novel dental composites. Ormocer based restorative Admira and nano-filled composite Clearfil Majesty Esthetic were bleached with 10% carbamide peroxide （Opalescence PF） or 35% hydrogen peroxide （Beyond Max 5） and subsequently immersed in four different staining solutions （coffee, tea, red wine, and cola）. Distilled water was used as a control. Color measurements were performed with a spectrophotometer. Vickers micro hardness and roughness data were analyzed with two- way analysis of variance for repeated measures. The analysis of variance was used to compare the color change values. Duncan＇s multiple comparison test was applied to compare the results （a = 5%）. AE~＂ values over 3.3 were considered clinically unacceptable. Micro hardness and surface roughness values of the tested composites were decreased significantly after bleaching applications. Red wine and tea storage caused perceptible discolorations in the composite resin materials after 30 days of 3-hour immersion. Home or office bleaching applications can affect the surface properties of resin composites and accelerate the staining process.展开更多
The difficulties of washing during the dressing of kaolin ore have been analyzed, the multistep intermittent washing model has been deduced, and effective methods for dealing with the difficulties were put forward. Ex...The difficulties of washing during the dressing of kaolin ore have been analyzed, the multistep intermittent washing model has been deduced, and effective methods for dealing with the difficulties were put forward. Experimental results show that the bleaching and washing process was enhanced, the washing time was shortened and the consumption of water was reduced by means of adding flocculant.展开更多
A method of treating pulpless coloured anterior tooth is presented.Most part ofthe coloured dentin of the labial crown was removed and the dental structure was bleachedwith 30% hydrogen peroxide for 5min.The pulp cavi...A method of treating pulpless coloured anterior tooth is presented.Most part ofthe coloured dentin of the labial crown was removed and the dental structure was bleachedwith 30% hydrogen peroxide for 5min.The pulp cavity was then filled with whitephoto-curing composite.The result of the treatment is quite satisfactory.With our treatment,the intact contour of the crown and the hardness and gloss of the enamel are preserved.SEM proved that the composite was tightly bound with the enamel of the medial wall of thepulp cavity,forming an entity with the tooth,thus guaranteeing the strength of the crown.展开更多
The Andaman and Nicobar Islands are one of the Union Territories of India, located in the eastern part of the Bay of Bengal. In 2010 summer, the increment in sea surface water temperature （up to 34℃） resulted in th...The Andaman and Nicobar Islands are one of the Union Territories of India, located in the eastern part of the Bay of Bengal. In 2010 summer, the increment in sea surface water temperature （up to 34℃） resulted in the bleaching of about 74% to 77% of corals in the South Andaman. During this event, coral species such as Acropora cerealis, A. humilis, Montipora sp., Favia paIlida, Diploastrea sp., Goniopora sp. Fungia concinna, Gardineroseries sp., Porites sp., Favites abdita and Lobophyllia robusta were severely affected. This study is to assess the recovery status of the reef ecosystem by estimating the percentage of Live Coral cover, Bleached coral cover, Dead coral with algae, Rubble, Sandy fiat, Algal assemblage and other associated organisms, The sedimentation rate （mg cm^-2 d^-1） and coral coverage （%） were assessed during this study period. The average sedimentation rate was ranged between 0.27 and 0.89 mg cm^-2 d^1. The observed post bleaching recovery of coral cover was 21.1% at Port Blair Bay and 13.29% at Havelock Island. The mortality rate of coral cover due to this bleaching was estimated as 2.05% at Port Blair Bay and 9.82% at Havelock Island. Once the sea water temperature resumed back to the normal condition, most of the corals were found recovered.展开更多
An enzyme-stimulating catalyst( PTL) with copper ions( Cu^(2+)) as the activation center and aminophosphonate as ligand was developed and applied in low-temperature scouring/bleaching of cotton knits. The optimal weig...An enzyme-stimulating catalyst( PTL) with copper ions( Cu^(2+)) as the activation center and aminophosphonate as ligand was developed and applied in low-temperature scouring/bleaching of cotton knits. The optimal weight ratio of Cu^(2+) to aminophosphonate was 1 ∶75. Via orthodox and single-factor experiments,the most efficient formula for low-temperature scouring/bleaching was composed of 0. 4 g/L high-efficiency degreaser DM-1130,1. 5 g/L PTL,2. 0 g/L sodium hydroxide( NaOH),and 7. 0 g/L 30% hydrogen peroxide( H_2O_2). The PTL could not only increase the whiteness of cotton knits,but also remove pectin to enhance capillary effect.展开更多
Bleaching with oxygen-containing agents and recirculation of process streams in the pulp and paper industry has increased the accumulation of oxalic acid and danger for precipitation of calcium oxalate encrusts, scali...Bleaching with oxygen-containing agents and recirculation of process streams in the pulp and paper industry has increased the accumulation of oxalic acid and danger for precipitation of calcium oxalate encrusts, scaling. Analysis and control of oxalic acid in bleaching filtrates is therefore becoming increasingly important in the pulp and paper industry. Chromatographic methods, such as IC and HPLC, are generally more time-consuming but are valuable as standard methods for determination of oxalic acid. However, the instrumentation needed is expensive and stationary. In this study, an enzymatic method based on oxalate oxidase and peroxidase was developed to determine oxalic acid in authentic bleaching filtrates using a spectrophotometer. The results showed that bleaching filtrates contain some compounds interfering with the enzymatic method. Pretreatment of the samples with activated charcoal was a successful approach for decreasing problems with interference. By using dilution followed by charcoal treatment, the results obtained from five bleaching filtrates with the colorimetric method correlated very well with those obtained using IC. This study offers a selective, fast and mobile analysis method to determine oxalic acid in bleaching fiRrates from the pulp and paper industry, The convenient enzyme-based method improves the possibilities for control of critical oxalic acid concentrations in closed-loop bleaching streams.展开更多
Brain coral is mainly distributed in the Great Lameshur Bay of the U.S. Virgin Islands in the Caribbean. It has very rare species, but the bleaching pheomenon is severe. In this study, the numbers and bleaching rates ...Brain coral is mainly distributed in the Great Lameshur Bay of the U.S. Virgin Islands in the Caribbean. It has very rare species, but the bleaching pheomenon is severe. In this study, the numbers and bleaching rates of brain corals in the sampling plots were investigated, and the trace elements contents in the seawater were determined with inductively coupled plasma-mass spectrometry （ICP- MS）. Then the correlation between the bleaching rate of brain coral and trace elements contents in seawater was analyzed. The results showed that under temperature of 27.83-28.88 ℃, pH of 8.5-8.7, salinity of 32.74%-34.04% and depth of 0-4 m, there were V, Cr, Rb, Sr, Ag and other trace elements in seawater. When the V content was lower than 99.1 ng/ml, the bleaching rate of brain coral was weakly correlated to V content in seawater; when the Cr content was lower than 23.5 ng/ml, the bleaching rate of brain coral was correlated to Cr content; when the Ag content ranged from 34.1-56.3 ng/ml, there was a significant correlation between bleaching rate of brain coral and Ag content in seawater .展开更多
基金supported by the Health and Family Planning Commission of Zhejiang Province,China(2012KYA11).
文摘Objective:To compare 16% carbamide peroxide(CP)with a higher concentration of hydrogen peroxide(HP)for bleaching teeth in office or at-home to erase tetracycline stains on teeth.Materials and methods:In a randomized,self-controlled clinical trial,we assigned eligible subjects to group A with 40% HP compared with 16% CP or group B with 45% CP compared with 16% CP on the split maxillary arch and followed the manufacturers’instructions.Tooth color changes were measured with vita 3D-bleached guide and colorimeter at baseline and three-time assessment.Tooth sensitive intensity was evaluated using numeric rating scales,and oral soft and hard tissue examination was recorded.Patient satisfaction survey was conducted at the last tooth color evaluation.Results:There were 20 subjects enrolled.The color changes by the end of the study were A1(40% HP)=8.22,A2(16% CP)=8.20,B1(45% CP)=11.27,B2(16% CP)=8.26 respectively.All groups experienced significant shade reductions by bleaching,the 45% CP group had significantly greatest color changes compared with the other groups(p=0.03).For tooth sensitivity evaluation,significant differences were observed in 40% HP group(p=0.01),but with mild level.None patients suffered oral soft or hard tissue abnormalities before and after treatment.Patients were more in favor of using 45% CP according to the questionnaire results.Conclusion:The 3 whitening agents were effective and safe for the whitening of tetracycline-stained teeth,the 45% CP agent had quicker whitening efficacy with low tooth sensitivity and positive feedback.Clinical significance:45% of high-concentration CP whitener by at-home using,brought faster and superior efficacy to bleaching tetracycline-stained teeth while had the equal intensity of tooth sensitivity.
基金support provided by the National 973 program (No. 2015CB453100)the Youth Innovation Promotion Association CAS (No. 2016038)the Strategic Priority Research Program of the CAS (No. XDB14020102)
文摘The effectiveness of ClO_2 bleaching as a replacement for conventional Cl_2 bleaching,which is intensively practiced in developing countries,to reduce polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs)in non-wood pulp and paper mills has not been field tested.The first field study was performed to investigate PCDD/F variations when ClO_2 bleaching was used as a substitute for conventional Cl_2 bleaching in a non-wood pulp and paper mill.It was found that the PCDD/F toxic equivalents(TEQs)in solid and effluent samples were approximately 1.3–14.9 times lower when ClO_2 bleaching was used instead of the conventional Cl_2 bleaching.2,3,7,8-Substituted tetrachlorinated dibenzofurans(2,3,7,8-TCDF)were the dominant contributors to total PCDD/F TEQs in samples from the investigated mill when using conventional Cl_2 bleaching.The formation amounts of 2,3,7,8-TCDF were reduced from 1.56–2.76 pg TEQ/g to 0.02–0.32 pg TEQ/g in solid samples when ClO_2 bleaching was used instead of the conventional Cl_2 bleaching.The replacement of Cl_2 with ClO_2 might decrease the chlorination reactions of dibenzofuran as potential precursors,and thus reduce the formation amounts of 2,3,7,8-TCDF.The results could provide important knowledge for suggesting the best available technique for PCDD/F reduction for non-wood pulp and paper mills in developing countries.
文摘Coral reefs in the Gulf of Mannar(GoM)and Palk Bay regions are facing potential threats from climate change,sedimentation and anthropogenic activities.Considerably,coral reefs in these two regions are highly damaged due to frequent bleaching events caused by increased sea surface temperature(SST)recorded over the past two decades.Recently,during February to May 2019,mass bleaching event of corals was documented again in GoM and Palk Bay regions due to increased sea surface temperatures ranged between 32°C to 36°C.Despite of completely bleached corals,some coral colonies of the same bleached coral species have displayed adaptive bleaching pattern(ABP)for survival.This incidence is displayed by the symbiotic zooxanthellae to protect coral polyps from environmental stress such as elevated temperatures.These observations infer that coral colonies with preferential bleaching pattern ability would serve as environmental stress resisting coral colonies which can be used for restoration activities and cryopreservation.Further studies are needed to explain the potential mechanisms or specific environmental drivers responsible for ABP.
基金Supported by Doctor Funds Xinjiang Production and Construction Corps (ZDGG2004-01) and Shihezi University’s Key Scien-tific and Technological Project of China (04BSZJ04).
文摘Bentonite produced in Xiazijie, Xinjiang (China) was characterized by X-ray diffraction (XRD), dif- ferential thermal analysis (DTA), thermogravimetric analysis (TG) and cation exchange capacity (CEC). The ben- tonite is composed of dioctahedral montmorillonite with predominant quantity, certain amounts of quartz, feldspar and illite and minor amounts of kaolinite, gypsum, etc. The raw bentonite has a CEC of 0.6497 meq·g-1 and allows to be characterized as typical sodium bentonite. In order to bleach cottonseed oil, optimum conditions for sulfuric acid activation of the raw bentonites were investigated, which were obtained by selecting various acid strength, at 96—98℃ and activating for 4h with 1︰2 solid-liquid ratio. The acid activation bentonites were suitable for decol- orization of cottonseed oil through removing carotene and chlorophyll. The bleaching capabilities of different pig- ments with activated bentonite with treatment of 25% sulfuric acid were 70.3%, 73.1%, 83.2%, 81.8% and 88.9%, respectively. Bleaching with acid activated bentonite gave oils lower peroxide values and acid values.
文摘This in vitrostudy aims to evaluate the crystal and surface microstructure of dental enamel after cold-light bleaching treatment. Twelve sound human premolars were cross-split into four specimens, namely, mesio-buccal （Group LP）, disto-buccal （Group P）, mesio-lingual （Group NP） and disto-lingual （Group L） specimens. These four groups were treated using the standard cold-light bleaching procedure, a bleaching agent, a peroxide-free bleaching agent and cold-light, respectively. Before and after treatment, all specimens were analyzed by high-resolution, micro-area X-ray diffraction and scanning electron microscopy. Using a spectrometer, tooth color of all specimens was measured before and after treatment. The phase of the enamel crystals was identified as hydroxyapatite and carbonated hydroxyapatite. After treatment, specimens in Groups LP and P showed significantly weaker X-ray diffraction peaks, significant reduction in crystal size and crystallinity, significant increase in L~ but decrease in a＊ and b＊, and obvious alterations in the surface morphology. However, specimens in Groups NP and L did not show any significant changes. The cold-light bleaching treatment leads to demineralization in the enamel surface. The acidic peroxide-containing bleaching agent was the major cause of demineralization, whereas cold-light did not exhibit significant increase or decrease effect on this demineralization.
文摘This work represents the extraction of oil with high free fatty acid content from spent bleaching earth using sub-critical water technology as a greener production pathway. The extraction efficiencies under different conditions were investigated. The studied parameters include temperatures in the range of 180 to 270°C, the feed to solventfeed-to-solvent (in this case water) ratio (1:1, 1:2, 1:3, 1:4 and 1:5) and extraction times in the range of 5-60 minutes. The results showed that the optimum temperature, feed to solventfeed-to-solvent ratio, and extraction time were 270°C, 1:3, and 20 minutes, respectively. In another experiment, the extracted free fatty acids were converted into mono-, di-, and triglycerides through esterification with glycerol to increase the value added of the extracted products. The kinetics of the extraction process was found to be corresponding to an irreversible consecutive unimolecular-type first order reaction, consisting of the extraction step followed by the decomposition reaction step. Both reaction rates of extraction and decomposition were estimated using the reaction rate equations utilizing the nonlinear regression method. The apparent activation energy was calculated to be 46.1 kJ·mol-1. This result indicates a diffusion controlled reaction. For more exploration and deep understanding of the extraction mechanism, other thermodynamic parameters were also calculated and analyzed including,ΔH#, ΔS#, and ΔG# of the extraction step.
文摘The available data have shown that acid-leached clays had sites for adsorption of impurities in oils. Data obtained on residual impurities in cotton and sunflower-seed oils bleached with the same clay materials produced linear Langmuir and Freundlich isotherms. The increase in constant, k with increase in both temperature of thermal activation and concentration of acid used to leach the clay, suggests that bleaching efficiency increased. The value of n decreased with increase in temperature of activation and concentration of acid used to leach the clay suggesting that bleaching capacity increased. The mineral compositions of the clays influenced their surface, structural and bleaching properties.
文摘Bleaching of black human hair has been studied systematically. On the basis of experimental data the technology of human hair bleaching through five processes was established. The optimum technology of improving the whiteness and reducing damage on fibers has been found. The technology can provide good luster,smooth handle and relatively high strength retention to human hair used for wigs or drama articles, meeting the needs of people better. Moreover, it also has important reference value to bleaching of other colored fibers.
文摘Coral reefs produce atmospheric dimethylsulfide (DMSa) which oxidises to non-sea-salt (nss) sulfate aerosols, precursors of cloud condensation nuclei (CCN) and low level cloud (LLC), reducing solar radiation and regulating sea surface temperatures (SSTs). Here we report measurements of solar radiation, SST, LLC, DMS flux, , and rainfall before, during and after a major coral bleaching event at Magnetic Island in the central Great Barrier Reef (GBR). Measurements are compared with those made at the nearby fringing reef of Or-pheus Island where coral bleaching did not occur. Extreme solar radiation levels occurred from November to late January and could have reflected cloud radiative effects that increased downwelling of solar radiation. High levels of LLC often coincided with high periodic fluxes of DMS from the unbleached coral reef at Orpheus Island (e.g. 14 - 20 μmol·m-2·d-1), in direct contrast to the very low fluxes of DMS that were emitted from the bleached, human-impacted Magnetic Island fringing reef (nd-0.8 μmol·m-2·d-1) when SSTs were >30°C. Continuous SSTs measurements at the Magnetic Island reef revealed various heating and cooling periods, interspersed with stable SSTs. Cooling periods (negative climate feedback) ranged from -1°C to -3°C (7 day mean -1.6°C), and often seemed to occur during low tides, periodic pulses of DMS flux and LLC, keeping SSTs °C. In contrast warming periods of +1°C to +3°C (positive climate feedback, 7 day mean +1.52°C), seemed to occur during increasing tides, decreasing DMS flux and low to medium levels of LLC which increased solar radiation and caused SSTs over 30°C and corals to bleach. Alternation between these two states or types of feedback is indicated in this research and may be a function of enhanced scattering of solar radiation from nss-sulfate aerosols that originate from oxidation of DMSa produced from the coral reefs in the GBR. The net radiative forcing from clouds can be as high as four times as large as the radiative forcing from a doubling of CO2 levels in the atmosphere, which needs to be taken into account when ascribing coral bleaching events in the GBR solely to GHG warming. Further studies are needed to more critically assess the importance of this GBR coral reef-cloud feedback to the climate of northern Australia and the western Pacific, where the greatest biomass of coral reefs occurs.
文摘The optimum bleaching parameters (clay dose and bleaching time) for palm kernel oil were determined using alkaline activated clay locally sourced in Nigerian. Activation was carried out using NaOH and KOH. The raw and activated clay samples were characterized using XRD and XRF. Bleached oil was analyzed for % colour reduction (%CR) and percentage free fatty acid (FFA) content before and after bleaching. Alkaline activation resulted to total dissolution of Mg2+ and Ca2+ ions in the octahedral sheet. The activation also affected the tetrahedral sheet by reducing the % composition of the silica and alumina ion after the modification. The results showed that alkaline activation had significant effect on mineralogical and chemical composition of the clay samples. The optimum bleaching conditions (clay dosage and bleaching time) of 3%/weight of oil and 30 mins resulted in 33.3% CR and %FFA of 2.2. It was discovered that NaOH activated clay resulted to higher %CR while KOH activated clay shows affinity for reduced %FFA but at higher concentration of 5 M. This research has further established that alkaline activated clays are feasible alternative for acid activated clays in vegetable oil bleaching.
文摘The preparation of a nonlinear directional coupler in polymer PMMA/DR1 film by photobleaching is studied. We find it easier to obtain a required coupling length by controlling photo bleaching time than by controlling the dimension of the coupler. The transmittance of each arm is measured when the pulse input light energy changes in our experiment. The experimental results show that the coupling length will change with the intensity of input light due to optical nonlinearities of the polymer PMMA/DR1 at 1 064 nm.
基金financially supported by the Natural Science Foundation of China (31070528)Project of China “Twelfth Five-Year” National Science and Technology Supporting Plan (2011BAC11B04)the Foundation of State Key Laboratory of Pulp and Paper Engineering
文摘In this study,Mg O was partially used as an alkali source in the peroxide bleaching process of bleached chemi-thermomechanical pulp(BCTMP).The effects of substitution percentage of Mg O for Na OH on the bulk,optical,and physical properties of bleached pulp,and the main effluent characteristics were analyzed.In addition,the influencing mechanism of Mgbased alkali on the strength properties of the BCTMP was further investigated.Strength properties of the BCTMPs were investigated as a function of charge characteristics,fiber morphology,surface lignin content,relative bonding area,and hydrogen bonds of the BCTMP.The results showed that cationic demand(CD) and chemical oxygen demand(COD_(Cr)) of the bleaching effluent decreased as the substitution percentage of Mg O for Na OH increased; meanwhile,the bulk and optical properties of the BCTMP increased.Nevertheless,the strength properties(tensile,tear,and burst indices) of the bleached pulp decreased as the substitution percentage of Mg O for Na OH increased.The decrease in the fiber charge density and increase in the surface lignin content affected the fiber swelling,resulting in a decline in pulp interfibers bonding strength and further loss of the tensile and burst indices.
文摘We investigated bleached human hair by FT-IR microspectroscopy and chemical imaging. The cross sectioned hair is approximately 90 μm in diameter, showed cuticle and cortex in chemical imaging. Differential amide I/II absorbance ratio and broadening amide I band between in the cortex and cuticle were confirmed in FT-IR microspectroscopy and chemical imaging. The cystine monoxide band from the products of disulfide oxidation of the amino acid cystine is associated with hair damaging during bleaching process. With increase bleaching time, the band for cystine monoxide shows more intense and larger area in chemical image. The spatially chemical change was investigated in detail by FT-IR microspectroscopy and chemical imaging during the bleached process.
基金Funded by the Research Fund of Ataturk University(Nos.2009/324,2011/43)
文摘The aim of this study was to investigate the effects of two bleaching systems on micro hardness, surface roughness and color stability of two novel dental composites. Ormocer based restorative Admira and nano-filled composite Clearfil Majesty Esthetic were bleached with 10% carbamide peroxide （Opalescence PF） or 35% hydrogen peroxide （Beyond Max 5） and subsequently immersed in four different staining solutions （coffee, tea, red wine, and cola）. Distilled water was used as a control. Color measurements were performed with a spectrophotometer. Vickers micro hardness and roughness data were analyzed with two- way analysis of variance for repeated measures. The analysis of variance was used to compare the color change values. Duncan＇s multiple comparison test was applied to compare the results （a = 5%）. AE~＂ values over 3.3 were considered clinically unacceptable. Micro hardness and surface roughness values of the tested composites were decreased significantly after bleaching applications. Red wine and tea storage caused perceptible discolorations in the composite resin materials after 30 days of 3-hour immersion. Home or office bleaching applications can affect the surface properties of resin composites and accelerate the staining process.
文摘The difficulties of washing during the dressing of kaolin ore have been analyzed, the multistep intermittent washing model has been deduced, and effective methods for dealing with the difficulties were put forward. Experimental results show that the bleaching and washing process was enhanced, the washing time was shortened and the consumption of water was reduced by means of adding flocculant.
文摘A method of treating pulpless coloured anterior tooth is presented.Most part ofthe coloured dentin of the labial crown was removed and the dental structure was bleachedwith 30% hydrogen peroxide for 5min.The pulp cavity was then filled with whitephoto-curing composite.The result of the treatment is quite satisfactory.With our treatment,the intact contour of the crown and the hardness and gloss of the enamel are preserved.SEM proved that the composite was tightly bound with the enamel of the medial wall of thepulp cavity,forming an entity with the tooth,thus guaranteeing the strength of the crown.
文摘The Andaman and Nicobar Islands are one of the Union Territories of India, located in the eastern part of the Bay of Bengal. In 2010 summer, the increment in sea surface water temperature （up to 34℃） resulted in the bleaching of about 74% to 77% of corals in the South Andaman. During this event, coral species such as Acropora cerealis, A. humilis, Montipora sp., Favia paIlida, Diploastrea sp., Goniopora sp. Fungia concinna, Gardineroseries sp., Porites sp., Favites abdita and Lobophyllia robusta were severely affected. This study is to assess the recovery status of the reef ecosystem by estimating the percentage of Live Coral cover, Bleached coral cover, Dead coral with algae, Rubble, Sandy fiat, Algal assemblage and other associated organisms, The sedimentation rate （mg cm^-2 d^-1） and coral coverage （%） were assessed during this study period. The average sedimentation rate was ranged between 0.27 and 0.89 mg cm^-2 d^1. The observed post bleaching recovery of coral cover was 21.1% at Port Blair Bay and 13.29% at Havelock Island. The mortality rate of coral cover due to this bleaching was estimated as 2.05% at Port Blair Bay and 9.82% at Havelock Island. Once the sea water temperature resumed back to the normal condition, most of the corals were found recovered.
基金South Wisdom Valley Innovative Research Team Program(No.2013CXTD05)
文摘An enzyme-stimulating catalyst( PTL) with copper ions( Cu^(2+)) as the activation center and aminophosphonate as ligand was developed and applied in low-temperature scouring/bleaching of cotton knits. The optimal weight ratio of Cu^(2+) to aminophosphonate was 1 ∶75. Via orthodox and single-factor experiments,the most efficient formula for low-temperature scouring/bleaching was composed of 0. 4 g/L high-efficiency degreaser DM-1130,1. 5 g/L PTL,2. 0 g/L sodium hydroxide( NaOH),and 7. 0 g/L 30% hydrogen peroxide( H_2O_2). The PTL could not only increase the whiteness of cotton knits,but also remove pectin to enhance capillary effect.
基金This work was supported by Vinnova and the Knowledge Foundation in Sweden.
文摘Bleaching with oxygen-containing agents and recirculation of process streams in the pulp and paper industry has increased the accumulation of oxalic acid and danger for precipitation of calcium oxalate encrusts, scaling. Analysis and control of oxalic acid in bleaching filtrates is therefore becoming increasingly important in the pulp and paper industry. Chromatographic methods, such as IC and HPLC, are generally more time-consuming but are valuable as standard methods for determination of oxalic acid. However, the instrumentation needed is expensive and stationary. In this study, an enzymatic method based on oxalate oxidase and peroxidase was developed to determine oxalic acid in authentic bleaching filtrates using a spectrophotometer. The results showed that bleaching filtrates contain some compounds interfering with the enzymatic method. Pretreatment of the samples with activated charcoal was a successful approach for decreasing problems with interference. By using dilution followed by charcoal treatment, the results obtained from five bleaching filtrates with the colorimetric method correlated very well with those obtained using IC. This study offers a selective, fast and mobile analysis method to determine oxalic acid in bleaching fiRrates from the pulp and paper industry, The convenient enzyme-based method improves the possibilities for control of critical oxalic acid concentrations in closed-loop bleaching streams.
文摘Brain coral is mainly distributed in the Great Lameshur Bay of the U.S. Virgin Islands in the Caribbean. It has very rare species, but the bleaching pheomenon is severe. In this study, the numbers and bleaching rates of brain corals in the sampling plots were investigated, and the trace elements contents in the seawater were determined with inductively coupled plasma-mass spectrometry （ICP- MS）. Then the correlation between the bleaching rate of brain coral and trace elements contents in seawater was analyzed. The results showed that under temperature of 27.83-28.88 ℃, pH of 8.5-8.7, salinity of 32.74%-34.04% and depth of 0-4 m, there were V, Cr, Rb, Sr, Ag and other trace elements in seawater. When the V content was lower than 99.1 ng/ml, the bleaching rate of brain coral was weakly correlated to V content in seawater; when the Cr content was lower than 23.5 ng/ml, the bleaching rate of brain coral was correlated to Cr content; when the Ag content ranged from 34.1-56.3 ng/ml, there was a significant correlation between bleaching rate of brain coral and Ag content in seawater .
