In order to describe and control the stress distribution and total deformation of bladed disk assemblies used in the aeroengine, a highly efficient and precise method of probabilistic analysis which is called extremum...In order to describe and control the stress distribution and total deformation of bladed disk assemblies used in the aeroengine, a highly efficient and precise method of probabilistic analysis which is called extremum response surface method(ERSM) is produced based on the previous deterministic analysis results with the finite element model(FEM). In this work, many key nonlinear factors, such as the dynamic feature of the temperature load, the centrifugal force and the boundary conditions, are taken into consideration for the model. The changing patterns with time of bladed disk assemblies about stress distribution and total deformation are obtained during the deterministic analysis, and at the same time, the largest deformation and stress nodes of bladed disk assemblies are found and taken as input target of probabilistic analysis in a scientific and reasonable way. Not only their reliability, historical sample, extreme response surface(ERS) and the cumulative probability distribution function but also their sensitivity and effect probability are obtained. Main factors affecting stress distribution and total deformation of bladed disk assemblies are investigated through the sensitivity analysis of the model. Finally, compared with the response surface method(RSM) and the Monte Carlo simulation(MCS), the results show that this new approach is effective.展开更多
An efficient multi-harmonic method is proposed for studying the effects of mistuning on resonant features of bladed disks with blade-to-blade dry friction damping. This method is able to predict accurately the forced ...An efficient multi-harmonic method is proposed for studying the effects of mistuning on resonant features of bladed disks with blade-to-blade dry friction damping. This method is able to predict accurately the forced response of bladed disks in frequency domain, which is validated by numerical integration method in time domain. The resonant features of both tuned and mistuned systems are investigated by using this method under various system coupling strengths, viscous dampings, and dry friction darnpings, etc. The results demonstrate that the proposed multi-harmonic method is very efficient for studying the mistuning effects on the resonant response of bladed disks with blade-to-blade dry friction damping, especially considering the combined effects of various system parameters.展开更多
Aimed at the difficulty in revealing the vibration localization mechanism of mistuned bladed disks by using simple non-linear model,a mechanical model of the bladed disk with random mistuning of hysteretic dry frictio...Aimed at the difficulty in revealing the vibration localization mechanism of mistuned bladed disks by using simple non-linear model,a mechanical model of the bladed disk with random mistuning of hysteretic dry friction damping was established.Then,the incremental harmonic balance method was used to analyze the effects of the parameters of bladed disks,such as the mistuning strength of dry friction force,coupled strength,viscous damping ratio and friction strength,on the forced response of the bladed disks.The results show that the vibrational energy localization phenomenon turns up in the tuned bladed disks if the nonlinear friction damping exists,and the random mistuning of the dry friction force intensifies this kind of vibration localization.展开更多
Considering the elastic supports,the finite element model of rotor-bladed disk-casing system is established using commercial software ANSYS/LS-DYNA.Assuming that broken blade is released from the disk,the complicate r...Considering the elastic supports,the finite element model of rotor-bladed disk-casing system is established using commercial software ANSYS/LS-DYNA.Assuming that broken blade is released from the disk,the complicate rubbing responses of unbalanced rotor-bladed disk-casing system are studied under different operational speeds.In addition,influences of both plastic deformation of blade and casing failure are analyzed.The results show that there exist some multiple even fractional frequencies in the transient and steady vibration responses of unbalanced rotor.Besides,one nodal diameter vibration of bladed disk coupling with the lateral vibration of the shaft as well as the first order bending vibration of blade can be excited under low operational speed,while the first order bending vibration of blade coupling with the lateral vibration of disk-shaft is easily excited under high operational speed.During rubbing process,three distinct contact states can be observed:broken blade-casing contact,broken blade-blade component-casing contact and broken blade-casing contact/blade component-casing contact/blade selfcontact.It is worth noting that the third contact state is related to the operational speed.With the increase of operational speed,self-contact in the blade may occur.展开更多
The finite element models of blade, disk and bladed disk are built up by finite element software ANSYS. The natural frequencies of the single blade, the whole bladed disk and the bladed disk with only one sector by cy...The finite element models of blade, disk and bladed disk are built up by finite element software ANSYS. The natural frequencies of the single blade, the whole bladed disk and the bladed disk with only one sector by cyclic symmetry boundary have been calculated. Then, based on the results above, a structure dynamic model of multiple degree-of-freedom （MDOF） systems is established to simulate the bladed-disk assembly. Solve the motion equation by using the Runge-Kutta Method （Gill Method）. The dynamic response of the MDOF system is achieved. As for the given mistuning patterns, the vibration responses of bladed disks are calculated. The results have been compared and analyzed, and the optimum pattern is selected.展开更多
In this paper,a method is proposed to improve the energy efficiency of the vertical axis turbine.First of all,a single disk multiple stream-tube model is used to calculate individual fitness.Genetic algorithm is adopt...In this paper,a method is proposed to improve the energy efficiency of the vertical axis turbine.First of all,a single disk multiple stream-tube model is used to calculate individual fitness.Genetic algorithm is adopted to optimize blade pitch motion of vertical axis turbine with the maximum energy efficiency being selected as the optimization objective.Then,a particular data processing method is proposed,fitting the result data into a cosine-like curve.After that,a general formula calculating the blade motion is developed.Finally,CFD simulation is used to validate the blade pitch motion formula.The results show that the turbine＇s energy efficiency becomes higher after the optimization of blade pitch motion;compared with the fixed pitch turbine,the efficiency of variable-pitch turbine is significantly improved by the active blade pitch control;the energy efficiency declines gradually with the growth of speed ratio;besides,compactness has lager effect on the blade motion while the number of blades has little effect on it.展开更多
基金Projects(51375032,51175017,51245027)supported by the National Natural Science Foundation of China
文摘In order to describe and control the stress distribution and total deformation of bladed disk assemblies used in the aeroengine, a highly efficient and precise method of probabilistic analysis which is called extremum response surface method(ERSM) is produced based on the previous deterministic analysis results with the finite element model(FEM). In this work, many key nonlinear factors, such as the dynamic feature of the temperature load, the centrifugal force and the boundary conditions, are taken into consideration for the model. The changing patterns with time of bladed disk assemblies about stress distribution and total deformation are obtained during the deterministic analysis, and at the same time, the largest deformation and stress nodes of bladed disk assemblies are found and taken as input target of probabilistic analysis in a scientific and reasonable way. Not only their reliability, historical sample, extreme response surface(ERS) and the cumulative probability distribution function but also their sensitivity and effect probability are obtained. Main factors affecting stress distribution and total deformation of bladed disk assemblies are investigated through the sensitivity analysis of the model. Finally, compared with the response surface method(RSM) and the Monte Carlo simulation(MCS), the results show that this new approach is effective.
基金National Nature Science Foundation of China (NO.50275121)
文摘An efficient multi-harmonic method is proposed for studying the effects of mistuning on resonant features of bladed disks with blade-to-blade dry friction damping. This method is able to predict accurately the forced response of bladed disks in frequency domain, which is validated by numerical integration method in time domain. The resonant features of both tuned and mistuned systems are investigated by using this method under various system coupling strengths, viscous dampings, and dry friction darnpings, etc. The results demonstrate that the proposed multi-harmonic method is very efficient for studying the mistuning effects on the resonant response of bladed disks with blade-to-blade dry friction damping, especially considering the combined effects of various system parameters.
基金Project(2007CB707706) supported by the National Basic Research Program of China
文摘Aimed at the difficulty in revealing the vibration localization mechanism of mistuned bladed disks by using simple non-linear model,a mechanical model of the bladed disk with random mistuning of hysteretic dry friction damping was established.Then,the incremental harmonic balance method was used to analyze the effects of the parameters of bladed disks,such as the mistuning strength of dry friction force,coupled strength,viscous damping ratio and friction strength,on the forced response of the bladed disks.The results show that the vibrational energy localization phenomenon turns up in the tuned bladed disks if the nonlinear friction damping exists,and the random mistuning of the dry friction force intensifies this kind of vibration localization.
基金supported by the National Natural Science Foundation of China(No.11772089)the Fundamental Research Funds for the Central Universities (Nos. N160312001and N160313004)the Research Project of State Key Laboratory of Mechanical System and Vibration(No.MSV201707)
文摘Considering the elastic supports,the finite element model of rotor-bladed disk-casing system is established using commercial software ANSYS/LS-DYNA.Assuming that broken blade is released from the disk,the complicate rubbing responses of unbalanced rotor-bladed disk-casing system are studied under different operational speeds.In addition,influences of both plastic deformation of blade and casing failure are analyzed.The results show that there exist some multiple even fractional frequencies in the transient and steady vibration responses of unbalanced rotor.Besides,one nodal diameter vibration of bladed disk coupling with the lateral vibration of the shaft as well as the first order bending vibration of blade can be excited under low operational speed,while the first order bending vibration of blade coupling with the lateral vibration of disk-shaft is easily excited under high operational speed.During rubbing process,three distinct contact states can be observed:broken blade-casing contact,broken blade-blade component-casing contact and broken blade-casing contact/blade component-casing contact/blade selfcontact.It is worth noting that the third contact state is related to the operational speed.With the increase of operational speed,self-contact in the blade may occur.
文摘The finite element models of blade, disk and bladed disk are built up by finite element software ANSYS. The natural frequencies of the single blade, the whole bladed disk and the bladed disk with only one sector by cyclic symmetry boundary have been calculated. Then, based on the results above, a structure dynamic model of multiple degree-of-freedom （MDOF） systems is established to simulate the bladed-disk assembly. Solve the motion equation by using the Runge-Kutta Method （Gill Method）. The dynamic response of the MDOF system is achieved. As for the given mistuning patterns, the vibration responses of bladed disks are calculated. The results have been compared and analyzed, and the optimum pattern is selected.
基金financially supported by the National Natural Science Foundation of China(Grant No.51309069)the Special Funded of Innovational Talents of Science and Technology in Harbin(Grant No.RC2014QN001008)+1 种基金the China Postdoctoral Science Foundation(Grant No.2014M561334)the Heilongjiang Postdoctoral Science Foundation(Grant No.LBH-Z14060)
文摘In this paper,a method is proposed to improve the energy efficiency of the vertical axis turbine.First of all,a single disk multiple stream-tube model is used to calculate individual fitness.Genetic algorithm is adopted to optimize blade pitch motion of vertical axis turbine with the maximum energy efficiency being selected as the optimization objective.Then,a particular data processing method is proposed,fitting the result data into a cosine-like curve.After that,a general formula calculating the blade motion is developed.Finally,CFD simulation is used to validate the blade pitch motion formula.The results show that the turbine＇s energy efficiency becomes higher after the optimization of blade pitch motion;compared with the fixed pitch turbine,the efficiency of variable-pitch turbine is significantly improved by the active blade pitch control;the energy efficiency declines gradually with the growth of speed ratio;besides,compactness has lager effect on the blade motion while the number of blades has little effect on it.
