In most effective bits evaluation of waveform recorders, the prerequisite is that there is no signal source distortion, or the distortion can be neglected. But when the distortion can be neglected or how it affects th...In most effective bits evaluation of waveform recorders, the prerequisite is that there is no signal source distortion, or the distortion can be neglected. But when the distortion can be neglected or how it affects the evaluation when it can't be neglected it is not determined yet. In this paper, the influence of signal source distortion to the evaluation of the effective bits of waveform recorders is discussed, then, the correction method of the effective bits error caused by the distortion influence is given. Finally , the error limit of the effective bits is given and how to selecte the calibrator is introduced. In the end , some simulation results of the new method in test are described.展开更多
This paper investigates the effects of walk-off among optical pulses on cross-phase modulation induced modulation instability in the normal dispersion region of an optical fibre with high-order dispersion. The results...This paper investigates the effects of walk-off among optical pulses on cross-phase modulation induced modulation instability in the normal dispersion region of an optical fibre with high-order dispersion. The results indicate that, in the case of high-order dispersion, the walk-off effect takes on new characteristics and will influence considerably the shape, position and especially the number of the spectral regions of the gain spectra of modulation instability. Not only the group-velocity mismatch, but also the difference of the third-order dispersion of two optical waves will alter the gain spectra of modulation instability but in different ways. Depending on the values of the walk-off parameters, the number of the spectral regions may increase from two to at most four, and the spectral shape and position may change too.展开更多
In this paper, we analyze the physical layer abstraction for bit interleaved coded orthogonal frequency division multiplexing(BIC-OFDM) system from a parallel bit channel perspective. By combining the exponential effe...In this paper, we analyze the physical layer abstraction for bit interleaved coded orthogonal frequency division multiplexing(BIC-OFDM) system from a parallel bit channel perspective. By combining the exponential effective SNR(signal-to-noise ratio) mapping(EESM) with the maximum a posteriori(MAP) algorithm, a bit LLR(log-likelihood ratio) wise EESM(BL-EESM) method is proposed. This method can abstract the link performance with high accuracy, especially for the case when channel estimation is imperfect. Afterward, the BL-EESM method is simplified by utilizing the non-linear quantization idea, which can reduce the times of exponential operation by two orders of magnitude at wide system bandwidth, yet shows little loss in accuracy. Our proposal can be applied to both system level simulations to save the time consumption and to practical terminals to facilitate the adaptive modulation and coding(AMC) procedure, bringing about throughput improvement at low hardware cost.展开更多
Radial drilling technology, of which the jet bit is the key device, is a research focus in the field of oil drilling and production. This paper establishes mechanical equations for jet bits and analyzes the hydroseal ...Radial drilling technology, of which the jet bit is the key device, is a research focus in the field of oil drilling and production. This paper establishes mechanical equations for jet bits and analyzes the hydroseal of backward jets in bottom holes. Meanwhile this paper establishes a mechanical equation for a high pressure hose and analyzes the axial force distribution. Laboratory experiments indicate that the flow rate, the angle between the backward nozzle axis and the jet bit axis, and the hole diameter are the major influencing factors; the generation of the pulling force is mainly due to the inlet pressure of the jet bit; the backward jets can significantly increase not only the pulling force but also the stability of jet bits. The pulling force would reach 8,376 N under experimental conditions, which can steadily pull the high-pressure hose forward.展开更多
Experimental evidence is presented relevant to the angular dependences of multiple-bit upset （MBU） rates and patterns in static random access memories （SRAMs） under heavy ion irradiation. The single event upset （...Experimental evidence is presented relevant to the angular dependences of multiple-bit upset （MBU） rates and patterns in static random access memories （SRAMs） under heavy ion irradiation. The single event upset （SEU） cross sections under tilted ion strikes are overestimated by 23.9%-84.6%, compared with under normally incident ion with the equivalent linear energy transfer （LET） value of 41 MeV/（mg/cm2）, which can be partially explained by the fact that the MBU rate for tilted ions of 30° is 8.5%-9.8% higher than for normally incident ions. While at a lower LET of - 9.5 MeV/（mg/cm2）, no clear discrepancy is observed. Moreover, since the ion trajectories at normal and tilted incidences are different, the predominant double-bit upset （DBU） patterns measured are different in both conditions. Those differences depend on the LET values of heavy ions and devices under test. Thus, effective LET method should be used carefully in ground-based testing of single event effects （SEE） sensitivity, especially in MBU-sensitive devices.展开更多
We theoretically and experimentally investigate the wave front distortion in critically phase-matched continuouswave（CW） second harmonic generation（SHG）.Due to the walk-off effect in the nonlinear crystal,the gene...We theoretically and experimentally investigate the wave front distortion in critically phase-matched continuouswave（CW） second harmonic generation（SHG）.Due to the walk-off effect in the nonlinear crystal,the generated second harmonic is extremely elliptical and quite non-Gaussian,which causes a very low matching and coupling efficiency in experiment.Cylindrical lenses and walk-off compensating crystals are adopted to correct distorted wave fronts,and obtain a good TEM00 mode efficiently.Theoretically,we simulate the correction effect of 266-nm laser generated with SHG.The experiment results accord well with the theoretical simulation and an above 80% TEM_（00） component is obtained for 266-nm continuous-wave laser with a 4.8？-walk-off angle in beta barium borate（BBO） crystal.展开更多
逐次逼近寄存器模数转换器(SAR ADC)在逐次逼近的过程中,电容的切换会使参考电压上出现参考纹波噪声,该噪声会影响比较器的判定,进而输出错误的比较结果。针对该问题,基于CMOS 0.5μm工艺,设计了一种具有纹波消除技术的10 bit SAR ADC...逐次逼近寄存器模数转换器(SAR ADC)在逐次逼近的过程中,电容的切换会使参考电压上出现参考纹波噪声,该噪声会影响比较器的判定,进而输出错误的比较结果。针对该问题,基于CMOS 0.5μm工艺,设计了一种具有纹波消除技术的10 bit SAR ADC。通过增加纹波至比较器输入端的额外路径,将参考纹波满摆幅输入至比较器中;同时设计了消除数模转换器(DAC)模块,对参考纹波进行采样和输入,通过反转纹波噪声的极性,消除参考纹波对ADC输出的影响。该设计将信噪比(SNR)提高到56.75 dB,将有效位数(ENOB)提升到9.14 bit,将积分非线性(INL)从-1~5 LSB降低到-0.2~0.3 LSB,将微分非线性(DNL)从-3~4 LSB降低到-0.5~0.5 LSB。展开更多
文摘In most effective bits evaluation of waveform recorders, the prerequisite is that there is no signal source distortion, or the distortion can be neglected. But when the distortion can be neglected or how it affects the evaluation when it can't be neglected it is not determined yet. In this paper, the influence of signal source distortion to the evaluation of the effective bits of waveform recorders is discussed, then, the correction method of the effective bits error caused by the distortion influence is given. Finally , the error limit of the effective bits is given and how to selecte the calibrator is introduced. In the end , some simulation results of the new method in test are described.
基金Project supported by the Fundamental Application Research Project of the Department of Science ＆ Technology of Sichuan Province （Grant Nos 05JY029-084 and 04JY029-103）, the Key Program of Natural Science Foundation of Educational Commission of Sichuan Province （Grant No 2006A124）, and the Foundation of Science ＆ Technology Development of Chengdu University of Information Technology （Grant No KYTZ20060604）.
文摘This paper investigates the effects of walk-off among optical pulses on cross-phase modulation induced modulation instability in the normal dispersion region of an optical fibre with high-order dispersion. The results indicate that, in the case of high-order dispersion, the walk-off effect takes on new characteristics and will influence considerably the shape, position and especially the number of the spectral regions of the gain spectra of modulation instability. Not only the group-velocity mismatch, but also the difference of the third-order dispersion of two optical waves will alter the gain spectra of modulation instability but in different ways. Depending on the values of the walk-off parameters, the number of the spectral regions may increase from two to at most four, and the spectral shape and position may change too.
基金the Shanghai Basic Research KeyProject(No.11DZ1500206)the NationalScience and Technology Major Project of China(No.2012ZX03001013-003)
文摘In this paper, we analyze the physical layer abstraction for bit interleaved coded orthogonal frequency division multiplexing(BIC-OFDM) system from a parallel bit channel perspective. By combining the exponential effective SNR(signal-to-noise ratio) mapping(EESM) with the maximum a posteriori(MAP) algorithm, a bit LLR(log-likelihood ratio) wise EESM(BL-EESM) method is proposed. This method can abstract the link performance with high accuracy, especially for the case when channel estimation is imperfect. Afterward, the BL-EESM method is simplified by utilizing the non-linear quantization idea, which can reduce the times of exponential operation by two orders of magnitude at wide system bandwidth, yet shows little loss in accuracy. Our proposal can be applied to both system level simulations to save the time consumption and to practical terminals to facilitate the adaptive modulation and coding(AMC) procedure, bringing about throughput improvement at low hardware cost.
基金supported by High-tech Research and Development Program of China (No. 2007AA09Z315)Doctoral Foundation of Ministry of Education of China (No. 20070425006)
文摘Radial drilling technology, of which the jet bit is the key device, is a research focus in the field of oil drilling and production. This paper establishes mechanical equations for jet bits and analyzes the hydroseal of backward jets in bottom holes. Meanwhile this paper establishes a mechanical equation for a high pressure hose and analyzes the axial force distribution. Laboratory experiments indicate that the flow rate, the angle between the backward nozzle axis and the jet bit axis, and the hole diameter are the major influencing factors; the generation of the pulling force is mainly due to the inlet pressure of the jet bit; the backward jets can significantly increase not only the pulling force but also the stability of jet bits. The pulling force would reach 8,376 N under experimental conditions, which can steadily pull the high-pressure hose forward.
基金supported by the National Natural Science Foundation of China(Grant Nos.11179003,10975164,10805062,and 11005134)
文摘Experimental evidence is presented relevant to the angular dependences of multiple-bit upset （MBU） rates and patterns in static random access memories （SRAMs） under heavy ion irradiation. The single event upset （SEU） cross sections under tilted ion strikes are overestimated by 23.9%-84.6%, compared with under normally incident ion with the equivalent linear energy transfer （LET） value of 41 MeV/（mg/cm2）, which can be partially explained by the fact that the MBU rate for tilted ions of 30° is 8.5%-9.8% higher than for normally incident ions. While at a lower LET of - 9.5 MeV/（mg/cm2）, no clear discrepancy is observed. Moreover, since the ion trajectories at normal and tilted incidences are different, the predominant double-bit upset （DBU） patterns measured are different in both conditions. Those differences depend on the LET values of heavy ions and devices under test. Thus, effective LET method should be used carefully in ground-based testing of single event effects （SEE） sensitivity, especially in MBU-sensitive devices.
基金Project supported by the National Natural Science Foundation of China(Grant No.91436103)Research Programme of National University of Defense Technology,China(Grant No.JC15-02-03)
文摘We theoretically and experimentally investigate the wave front distortion in critically phase-matched continuouswave（CW） second harmonic generation（SHG）.Due to the walk-off effect in the nonlinear crystal,the generated second harmonic is extremely elliptical and quite non-Gaussian,which causes a very low matching and coupling efficiency in experiment.Cylindrical lenses and walk-off compensating crystals are adopted to correct distorted wave fronts,and obtain a good TEM00 mode efficiently.Theoretically,we simulate the correction effect of 266-nm laser generated with SHG.The experiment results accord well with the theoretical simulation and an above 80% TEM_（00） component is obtained for 266-nm continuous-wave laser with a 4.8？-walk-off angle in beta barium borate（BBO） crystal.
