A novel phosphate ligand, tri-（methoxyl polyethylene glycol）-phosphate （TMPGPA）, has been synthesized and used in the Rhcatalyzed hydroformylation of cyclohexene in a thermoregulated PEG biphase system. Under the ...A novel phosphate ligand, tri-（methoxyl polyethylene glycol）-phosphate （TMPGPA）, has been synthesized and used in the Rhcatalyzed hydroformylation of cyclohexene in a thermoregulated PEG biphase system. Under the optimized conditions, pressure = 5 MPa （H2：CO = 1：1）, P/Rh = 10 （molar ratio）, reaction time = 4 h and temperature = 120 ℃, the conversion of cyclohexene and the yield of aldehyde are 99%. The catalyst retained in PEG phase can be easily separated from the organic phase containing product by simple phase separation and reused ten times without obvious loss in activity.展开更多
Polyethylene glycol （PEG）-stabilized palladium nanoparticles were prepared and applied to the selective hydrogenation of 1,5- cyclooctadiene （1,5-COD） in thermoregulated PEG biphase system, which allows a reaction...Polyethylene glycol （PEG）-stabilized palladium nanoparticles were prepared and applied to the selective hydrogenation of 1,5- cyclooctadiene （1,5-COD） in thermoregulated PEG biphase system, which allows a reaction in a single-phase at a higher temperature followed by a phase split at a lower temperature. Under the optimized reaction conditions, the conversion of 1,5-COD and the selectivity of cyclooctene （COE） were 100 and 98%, respectively. The catalyst could be easily separated from the product by phase separation and reused for 6 times without evident loss in activity and selectivity. 2007 Yan Hua Wang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
Some apolar organic solvents is miscible with perfluorous nonene to form fluorous biphase systems.Perfluorous nonene could be used as a green solvent in equimolar esterification of carboxylic acids with alcohols witho...Some apolar organic solvents is miscible with perfluorous nonene to form fluorous biphase systems.Perfluorous nonene could be used as a green solvent in equimolar esterification of carboxylic acids with alcohols without removal of water or ester formed. Perfluorous nonene made the esterification equilibrium to move right and the yields of esterification to enhance in different degrees as compared with that in the absence of perfluorous nonene. After esterification perfluorous nonene is easy to be recovered and recycled.展开更多
The conversion process of chitin,one of the abundant biomass resources on the earth,not only follows the principles of green chemistry,but also has significant value in industrial applications.However,it is a great ch...The conversion process of chitin,one of the abundant biomass resources on the earth,not only follows the principles of green chemistry,but also has significant value in industrial applications.However,it is a great challenge to directly convert insoluble and rigid structured chitin to 5-hydroxymethylfurfural(HMF).To address this issue,we developed a green conversion process combining pretreatment and catalytic system.Chitin was first pretreated by hexafluoro isopropanol(HFIP),which somewhat disrupted the hydrogen bonding network within the chitin structure.Subsequently,formic acid(FA)and silicotungstic acid(STA)synergistically catalyzed the conversion to HMF in a biphasic system of 2-methyltetrahydrofuran(2-Me-THF)/H2O,and high yields(40.2%)HMF was obtained under the optimism conditions.The product distribution was analyzed by HPLC-MS and the co-catalysis of FA with STA was evidenced.A dual-function catalytic system with both Lewis and Br?nsted acids was created,the catalytic system that significantly improved the efficiency of complex tandem catalytic reactions with chitin.Based on the experimental results,a possible pathway for chitin conversion was deduced,providing a new catalytic idea for the efficient conversion of chitin to HMF.展开更多
The recent advances in accelerated polymerization of N-carboxyanhydrides (NCAs) offer an effective strategy to simplify the preparation of polypeptide materials. However, the fine-tuning of polymerization kinetics, wh...The recent advances in accelerated polymerization of N-carboxyanhydrides (NCAs) offer an effective strategy to simplify the preparation of polypeptide materials. However, the fine-tuning of polymerization kinetics, which is critical to differentiate the main polymerization and the side reactions, remains largely unexplored. Herein we report the modulation of polymerization rate of NCA in a water/oil biphasic system. By altering the aqueous pH, the initial location of the initiators, and the pK_(a) of initiating amines, we observed the change in polymerization time from several minutes to a few hours. Due to the high interfacial activity and low pKa value, controlled polymerization was observed from multi-amine initiators even if they were initially located in the aqueous phase. This work not only improves our understanding on the biphasic polymerization mechanism, but also facilitates preparation of versatile polypeptide materials.展开更多
Biphasic layered oxide cathodes,known for their superior electrochemical performance,are prime candidates for commercializing in Na-ion batteries.Herein,we unveil a series of P3/P2 monophasic and biphasic Al-substitut...Biphasic layered oxide cathodes,known for their superior electrochemical performance,are prime candidates for commercializing in Na-ion batteries.Herein,we unveil a series of P3/P2 monophasic and biphasic Al-substituted Na_(3/4)Mn_(5-x/8)Al_(2x/8)Ni_(3-x/8)O_(2)layered oxide cathodes that lie along the‘zero Mn^(3+)line’in the Na_(3/4)(Mn-Al-Ni)O_(2)pseudo-ternary system.The structural analysis showed a larger Na^(+)conduction bottleneck area in both P3 and P2 structures with a higher Al3+content,which enhanced their rate performance.In each composition,the P3/P2 biphasic compound with nearly equal fractions of P3 and P2 phases outperformed their monophasic counterparts in almost all electrochemical performance parameters.Operando synchrotron XRD measurements obtained for the monophasic P3 and biphasic P2/P3 samples revealed the absence of the O3 phase during cycling.The high structure stability and faster Na^(+)transport kinetics in the biphasic samples underpins the enhancement of electrochemical properties in the Al-substituted P3/P2 cathodes.These results highlight fixed oxidation state lines as a novel tool to identify and design layered oxide cathodes for Na-ion batteries in pseudo-ternary diagrams involving Jahn-Teller active cations.展开更多
A natural attapulgite （ATP）‐based catalyst, sulfated In2O3‐ATP （SO42-/In2O3‐ATP）, was obtained by an impregnation‐calcination method and was used to efficiently and selectively produce the useful platform chem...A natural attapulgite （ATP）‐based catalyst, sulfated In2O3‐ATP （SO42-/In2O3‐ATP）, was obtained by an impregnation‐calcination method and was used to efficiently and selectively produce the useful platform chemical 5‐hydroxymethylfurfural （HMF） from hexoses. Some important reaction param‐eters were studied, revealing that Lewis and Br-nsted acid sites on SO42-/In2O3‐ATP catalyze glu‐cose isomerization and fructose dehydration. The yields of HMF from glucose and fructose were 40.2%and 46.2%, respectively, using the optimal conditions of 180℃ for 60 min with 10 wt%of solid acid catalyst in a mixture of γ‐valerolactone‐water （9：1）.展开更多
Phase change absorbents based on amine chemical absorption for CO_(2)capture exhibit energy-saving potential,but generally suffer from difficulties in CO_(2)regeneration.Alcohol,characterized as a protic reagent with ...Phase change absorbents based on amine chemical absorption for CO_(2)capture exhibit energy-saving potential,but generally suffer from difficulties in CO_(2)regeneration.Alcohol,characterized as a protic reagent with a low dielectric constant,can provide free protons to the rich phase of the absorbent,thereby facilitating CO_(2)regeneration.In this investigation,N-aminoethylpiperazine(AEP)/sulfolane/H_(2)O was employed as the liquid-liquid phase change absorbent,with alcohol serving as the regulator.First,appropriate ion pair models were constructed to simulate the solvent effect of the CO_(2)products in different alcohol solutions.The results demonstrated that these ion pair products reached the maximum solvation-free energy(△E_(solvation))in the rich phase containing ethanol(EtOH).Desorption experiment results validated that the inclusion of EtOH led to a maximum regeneration rate of 0.00763 mol/min,thus confirming EtOH’s suitability as the preferred regulator.Quantum chemical calculations and^(13)C NMR characterization were performed,revealing that the addition of EtOH resulted in the partial conversion of AEP-carbamate(AEPCOO−)into a new product known as ethyl carbonate(C_(2)H_(5)OCOO−),which enhanced the regeneration reactivity.In addition,the decomposition paths of different CO_(2)products were simulated visually,and every reaction’s activation energy(△E_(act))was calculated.Remarkably,the△E_(act)for the decomposition of C_(2)H_(5)OCOO−(9.465 kJ/mol)was lower than that of the AEPCOO−(26.163 kJ/mol),implying that CO_(2)was more likely to be released.Finally,the regeneration energy consumption of the alcohol-regulated absorbentwas estimated to be only 1.92 GJ/ton CO_(2),which had excellent energy-saving potential.展开更多
Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+d...Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+dynamics and rapid capacity decay.In this study,we propose a medium-entropy cathode by simultaneously introducing Fe,Mg,and Li dopants into a typical P2-type Na_(0.75)Ni_(0.25)Mn_(0.75)O_(2)cathode.The modified Na_(0.75)Ni_(0.2125)Mn_(0.6375)Fe_(0.05)Mg_(0.05)Li_(0.05)O_(2)cathode predominantly exhibits a main P2 phase(93.5%)with a minor O3 phase(6.5%).Through spectroscopy techniques and electrochemical investigations,we elucidate the redox mechanisms of Ni^(2+/3+/4+),Mn^(3+/4+),Fe^(3+/4+),and O_(2)-/O_(2)^(n-)during charging/discharging.The medium-entropy doping mitigates the detrimental P2-O_(2)phase transition at high-voltage,replacing it with a moderate and reversible structural evolution(P2-OP4),thereby enhancing structural stability.Consequently,the modified cathode exhibits a remarkable rate capacity of 108.4 mAh·g^(-1)at 10C,with a capacity retention of 99.0%after 200 cycles at 1C,82.5%after 500 cycles at 5C,and 76.7%after 600 cycles at 10C.Furthermore,it also demonstrates superior electrochemical performance at high cutoff voltage of 4.5 V and extreme temperature(55 and 0℃).This work offers solutions to critical challenges in sodium ion batteries cathode materials.展开更多
A 63-year-old man was admitted to the hospital with a>1-year history of repeated acid reflux and belching and a 1-month history of an abdominal mass.On admission,the patient was in good condition,and his vital sign...A 63-year-old man was admitted to the hospital with a>1-year history of repeated acid reflux and belching and a 1-month history of an abdominal mass.On admission,the patient was in good condition,and his vital signs were stable.Laboratory examinations revealed no significant abnormalities.展开更多
The unique oxygen stacking sequence of O2-type structures restricts the irreversible transition metal movement into Li vacancies for the delithiated Li-rich layered oxides(LLOs)and maintains outstanding voltage stabil...The unique oxygen stacking sequence of O2-type structures restricts the irreversible transition metal movement into Li vacancies for the delithiated Li-rich layered oxides(LLOs)and maintains outstanding voltage stability.However,the ion-exchange synthesis promotes the Mn-ion valence reduction and aggravates the Jahn-Teller(J-T)distortion alongside disproportionation.Since the main oxidation state of the Mn ions is+4 in the traditional O3-type LLOs,synergistic effects of the O2-type and O3-type structures are expected in the O2/O3 diphasic Li-rich material.Herein,O2/O3 biphasic intergrowth LLOs were rationally designed,and the synergic optimization of the biphasic structure was planned to retard the J-T effect.The O2/O3 intergrowth nature was confirmed,and the percentages of the O2 and O3 phases were 56%and 44%,respectively.Density functional theory calculations demonstrated that the Mn^(2+)(EC)sheath had a remarkably lower energy barrier than the Li^(+)(EC)sheath.This finding suggests that Mn^(2+)ions that are dissolved into the electrolyte accelerate the electrolyte oxidization,so the deposition of the cathode electrolyte interface for pristine O2-LLOs causes a high electrochemical impedance.The designed O2/O3 biphasic LLOs boost the capacity stability and suppress the voltage drop upon repeated Li^(+)de-intercalation.The phase regulation strategy offers great potential for developing low-cost LLOs with enhanced structural stability for advanced Li-ion batteries.展开更多
An innovative strategy was proposed by integration of membrane contactor(MC)with biphasic solvent for efficient CO_(2) capture from flue gas.The accessible fly ash-based ceramic membrane(CM)underwent hydrophobic modif...An innovative strategy was proposed by integration of membrane contactor(MC)with biphasic solvent for efficient CO_(2) capture from flue gas.The accessible fly ash-based ceramic membrane(CM)underwent hydrophobic modification through silane grafting,followed by fluoroalkylsilane decoration,to prepare the superhydrophobic membrane(CSCM).The CSCM significantly improved resistance to wetting by the biphasic solvent,consisting of amine(DETA)and sulfolane(TMS).Morphological characterizations and chemical analysis revealed the notable enhancements in pore structure and hydrophobic chemical groups for the modified membrane.Predictions of wetting/bubbling behavior based on static wetting theory referred the liquid entry pressure(LEP)of CSCM increased by 20 kPa compared to pristine CM.Compared with traditional amine solvents,the biphasic solvent presented the expected phase separation.Performance experiments demonstrated that the CO_(2) capture efficiency of the biphasic solvent increased by 7%,and the electrical energy required for desorption decreased by 32%.The 60-h continuous testing and supplemental characterization of used membrane confirmed the excellent adaptability and durability of the CSCMs.This study provides a potential approach for accessing hydrophobic ceramic membranes and biphasic solvents for industrial CO_(2) capture.展开更多
The biphasic solvent is a promising solution to reduce regeneration energy consumption in CO_(2) capture.However,most current biphasic solvents suffer from high viscosity and poor desorption of the rich phase.To the i...The biphasic solvent is a promising solution to reduce regeneration energy consumption in CO_(2) capture.However,most current biphasic solvents suffer from high viscosity and poor desorption of the rich phase.To the issues,a novel pentamethyldiethylenetriamine(PMDETA)-2-amino-2-methyl-1-propanol(AMP)/diethylenetriamine(DETA)-sulfolane biphasic solvent was developed.The mechanism of AMP affecting CO_(2) recycling capacity was analyzed.By adjusting the ratio of AMP and DETA,the absorption and desorption performance were balanced,and the recycling capacity and renewable energy consumption of the absorbent were improved.For the P_(2.4)A_(0.8)D_(0.8)S_(2) biphasic solvent,the CO_(2) loading of the rich phase was 5.87 mol/L,and the proportion of the rich phase volume ratio was 35%,which surpasses most reported biphasic solvents.The viscosity of the absorbent significantly decreased from 527.00 mPa·s to 92.26 mPa·s,attributed to the beneficial effect of AMP.Thermodynamic analysis showed that the biphasic solvent produced a lower regeneration energy consumption of 1.70 GJ/t CO_(2),which was 57%lower than that of monoethanolamine(MEA).Overall,the PMDETA-AMP/DETA-sulfolane biphasic solvent exhibited cycle capacity,which provided new insights for the designing of biphasic solvent.展开更多
Sodium-ion batteries(SIBs)have the advantages of environmental friendliness,cost-effectiveness,and high energy density,which are considered one of the most promising candidates for lithium-ion batteries(LIBs).The cath...Sodium-ion batteries(SIBs)have the advantages of environmental friendliness,cost-effectiveness,and high energy density,which are considered one of the most promising candidates for lithium-ion batteries(LIBs).The cathode materials influence the cost and energy output of SIBs.Therefore,the development of advanced cathode materials is crucial for the practical application of SIBs.Among various cathode materials,layered transition metal oxides(LTMOs)have received widespread attention owing to their straightforward preparation,abundant availability,and cost-competitiveness.Notably,layered Fe-based oxide cathodes are deemed to be one of the most promising candidates for the lowest price and easy-to-improve performance.Nevertheless,the challenges such as severe phase transitions,sluggish diffusion kinetics and interfacial degradation pose significant hurdles in achieving high-performance cathodes for SIBs.This review first briefly outlines the classification of layered structures and the working principle of layered oxides.Then,recent advances in modification strategies employed to address current issues with layered iron-based oxide cathodes are systematically reviewed,including ion doping,biphasic engineering and surface modification.Furthermore,the review not only outlines the prospects and development directions for layered Fe-based oxide cathodes but also provides novel insights and directions for future research endeavors for SIBs.展开更多
Lithium-sulfur(Li-S)batteries promise high energy density but suffer from low conductivity,polysulfide shuttling,and sluggish conversion kinetics.The construction of heterointerfaces is an effective strategy for enhan...Lithium-sulfur(Li-S)batteries promise high energy density but suffer from low conductivity,polysulfide shuttling,and sluggish conversion kinetics.The construction of heterointerfaces is an effective strategy for enhancing both polysulfide adsorption and conversion;however,the poor lattice compatibility in the heterointerface formed by different materials hinders interfacial charge transfer.In response to these challenges,herein,a biphasic homojunction of TiO_(2)enriched with oxygen vacancies and decorated with nitrogen-doped carbon nanotubes(B-TiO_(2-x)@NCNT)was designed to simultaneously enhance adsorption ability and catalytic activity.This homojunction interface composed of rutile(110)and anatase(101)plane exhibits excellent compatibility,and density functional theory(DFT)calculations reveal that this biphasic interface possesses a much higher binding energy to polysulfides compared to single-phase TiO_(2).Additionally,NCNTs are in situ grown on both interior and exterior surfaces of the hollow TiO_(2)nanospheres,facilitating rapid electron transfer for the encapsulated sulfur.The homojunction interface synergistically leverages the oxygen vacancies and highly conductive NCNTs to enhance the bidirectional catalytic activity for polysulfide conversion.Therefore,in this multifunctional sulfur-host,polysulfides are first strongly adsorbed at the homojunction interfaces and subsequently undergo smooth conversion,nucleation,and decomposition,completing a rapid sulfur redox cycle.The assembled Li-S battery delivered a high specific capacity of 1234.3 mAh g^(-1)at 0.2 C,long cycling stability for over 1000 cycles at 5 C with a low decay rate of 0.035%,and exciting areal capacity at a high sulfur loading of 5.6 mg cm^(-2)for 200cycles.展开更多
With the development of chemical absorbers,biphasic absorbers have the potential for absorption performance and energy consumption.In this work,a new biphasic absorber composed of tetraethylene pentamine(TEPA)and Diet...With the development of chemical absorbers,biphasic absorbers have the potential for absorption performance and energy consumption.In this work,a new biphasic absorber composed of tetraethylene pentamine(TEPA)and Diethyl ethanolamine(DEEA)is formed to capture CO_(2).The appropriate stratification boundaries by experimentation are found for orthogonal experiment.The optimum capture CO_(2)conditions are obtained according to the orthogonal design.The ranking of factors affecting the ability and rate to absorb CO_(2)is C(waste flow rate)>A(mass ratio)>B(reaction temperature).The desorption efficiency of the new biphasic absorber reaches 96.66%at 140C.The new biphasic absorber has good recyclability and its energy consumption is 2.23 GJ·t^(-1)CO_(2).Through viscosity experiment,reaction products analyzed by 13C NMR date,functional groups and chemical bonds analyzed by FT-IR date analysis,the mechanisms of CO_(2)absorption and phase transition follow a zwitterionic mechanism.This is a biphasic amine that deserves in-depth study.展开更多
Constructing an in vitro vascularized liver tissue model that closely simulates the human liver is crucial for promoting cell proliferation,mimicking physiological heterogeneous structures,and recreating the cellular ...Constructing an in vitro vascularized liver tissue model that closely simulates the human liver is crucial for promoting cell proliferation,mimicking physiological heterogeneous structures,and recreating the cellular microenvironment.However,the layer-by-layer printing method is significantly constrained by the rheological properties of the bioink,making it challenging to form complex three-dimensional vascular structures in low-viscosity soft materials.To overcome this limitation,we developed a cross-linkable biphasic embedding medium by mixing low-viscosity biomaterials with gelatin microgel.This medium possesses yield stress and self-healing properties,facilitating efficient and continuous three-dimensional shaping of sacrificial ink within it.By adjusting the printing speed,we controlled the filament diameter,achieving a range from 250μm to 1000μm,and ensuring precise control over ink deposition locations and filament shapes.Using the in situ endothelialization method,we constructed complex vascular structures and ensured close adhesion between hepatocytes and endothelial cells.In vitro experiments demonstrated that the vascularized liver tissue model exhibited enhanced protein synthesis and metabolic function compared to mixed liver tissue.We also investigated the impact of varying vascular densities on liver tissue function.Transcriptome sequencing revealed that liver tissues with higher vascular density exhibited upregulated gene expression in metabolic and angiogenesis-related pathways.In summary,this method is adaptable to various materials,allowing the rheological properties of the supporting bath and the tissue's porosity to be modified using microgels,thus enabling precise regulation of the liver tissue microenvironment.Additionally,it facilitates the rapid construction of three-dimensional vascular structures within liver tissue.The resulting vascularized liver tissue model exhibits enhanced biological functionality,opening new opportunities for biomedical applications.展开更多
Post-combustion CO_2 capture(PCC) process faces significant challenge of high regeneration energy consumption.Biphasic absorbent is a promising alternative candidate which could significantly reduce the regeneration e...Post-combustion CO_2 capture(PCC) process faces significant challenge of high regeneration energy consumption.Biphasic absorbent is a promising alternative candidate which could significantly reduce the regeneration energy consumption because only the CO_2-concentrated phase should be regenerated. In this work, aqueous solutions of triethylenetetramine(TETA) and N,N-diethylethanolamine(DEEA) are found to be efficient biphasic absorbents of CO_2. The effects of the solvent composition, total amine concentration, and temperature on the absorption behavior, as well as the effect of temperature on the desorption behavior of TETA–DEEA–H2 O system were investigated. An aqueous solution of 1 mol·L-1 TETA and 4 mol·L-1 DEEA spontaneously separates into two liquid phases after a certain amount of CO_2 is absorbed and it shows high CO_2 absorption/desorption performance.About 99.4% of the absorbed CO_2 is found in the lower phase, which corresponds to a CO_2 absorption capacity of 3.44 mol·kg-1. The appropriate absorption and desorption temperatures are found to be 30 °C and 90 °C,respectively. The thermal analysis indicates that the heat of absorption of the 1 mol·L-1 TETA and 4 mol·L-1 DEEA solution is-84.38 kJ·(mol CO_2)-1 which is 6.92 kJ·(mol CO_2)-1 less than that of aqueous MEA. The reaction heat, sensible heat, and the vaporization heat of the TETA–DEEA–H2 O system are lower than that of the aqueous MEA, while its CO_2 capacity is higher. Thus the TETA–DEEA–H2 O system is potentially a better absorbent for the post-combustion CO_2 capture process.展开更多
Immobilization biocatalysis is a potential technology to improve the activity and stability of biocatalysts in nonaqueous systems for efficient industrial production.Alginate-chitosan(AC)microcapsules were prepared as...Immobilization biocatalysis is a potential technology to improve the activity and stability of biocatalysts in nonaqueous systems for efficient industrial production.Alginate-chitosan(AC)microcapsules were prepared as immobilization carriers by emulsifi cation-internal gelation and complexation reaction,and their contribution on facilitating the growth and metabolism of yeast cells were testifi ed successfully in culture medium-solvent biphasic systems.The cell growth in AC microcapsules is superior to that in alginate beads,and the cells in both immobilization carriers maintain much higher activity than free cells,which demonstrates AC microcapsules can confer yeast cells the ability to resist the adverse effect of solvent.Moreover,the performance of AC microcapsules in biphasic systems could be improved by adjusting the formation of outer polyelectrolyte complex(PEC)membrane to promote the cell growth and metabolic ability under the balance of resisting solvent toxicity and permitting substrate diffusion.Therefore,these findings are quite valuable for applying AC microcapsules as novel immobilization carriers to realize the biotransformation of value-added products in aqueous-solvent biphasic systems.展开更多
Phosphoric acid treated niobic acid(NbP)was used for the dehydration of xylose to furfural in biphasic solvent system,which was found to exhibit the best performance among the tested catalysts.The excellent performanc...Phosphoric acid treated niobic acid(NbP)was used for the dehydration of xylose to furfural in biphasic solvent system,which was found to exhibit the best performance among the tested catalysts.The excellent performance of NbP could be explained by the better synergistic cooperation between Bro¨nsted and Lewis acid sites.Moreover,NbP showed good stability and no obvious deactivation or leaching of Nb could be observed after six continuous recycles.展开更多
基金Financial support from Fok Ying Tung Education Foundation(No.91071)the National Natural Science Foundation of China(No.20376013)are gratefully acknowledged.
文摘A novel phosphate ligand, tri-（methoxyl polyethylene glycol）-phosphate （TMPGPA）, has been synthesized and used in the Rhcatalyzed hydroformylation of cyclohexene in a thermoregulated PEG biphase system. Under the optimized conditions, pressure = 5 MPa （H2：CO = 1：1）, P/Rh = 10 （molar ratio）, reaction time = 4 h and temperature = 120 ℃, the conversion of cyclohexene and the yield of aldehyde are 99%. The catalyst retained in PEG phase can be easily separated from the organic phase containing product by simple phase separation and reused ten times without obvious loss in activity.
基金Financial support from the National Natural Science Foundation of China （No. 20573015） is gratefully acknowledged.
文摘Polyethylene glycol （PEG）-stabilized palladium nanoparticles were prepared and applied to the selective hydrogenation of 1,5- cyclooctadiene （1,5-COD） in thermoregulated PEG biphase system, which allows a reaction in a single-phase at a higher temperature followed by a phase split at a lower temperature. Under the optimized reaction conditions, the conversion of 1,5-COD and the selectivity of cyclooctene （COE） were 100 and 98%, respectively. The catalyst could be easily separated from the product by phase separation and reused for 6 times without evident loss in activity and selectivity. 2007 Yan Hua Wang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金Supported by the Natural Science Foundation of Zhejiang Province （Y 405396）.
文摘Some apolar organic solvents is miscible with perfluorous nonene to form fluorous biphase systems.Perfluorous nonene could be used as a green solvent in equimolar esterification of carboxylic acids with alcohols without removal of water or ester formed. Perfluorous nonene made the esterification equilibrium to move right and the yields of esterification to enhance in different degrees as compared with that in the absence of perfluorous nonene. After esterification perfluorous nonene is easy to be recovered and recycled.
基金Supported by the National Natural Science Foundation of China(No.42076126)the Shandong Key R&D Plan+2 种基金Major Scientific and Technological Innovation Project(No.2022CXGC020413)the Natural Science Foundation of Shandong Province(Nos.ZR2020MD072,ZR2021QD014)the Liaoning Provincial Natural Science Foundation:Joint Open Fund of the State Key Laboratory for the Creation and Development of New Pesticides(No.2022-KF-25-03)。
文摘The conversion process of chitin,one of the abundant biomass resources on the earth,not only follows the principles of green chemistry,but also has significant value in industrial applications.However,it is a great challenge to directly convert insoluble and rigid structured chitin to 5-hydroxymethylfurfural(HMF).To address this issue,we developed a green conversion process combining pretreatment and catalytic system.Chitin was first pretreated by hexafluoro isopropanol(HFIP),which somewhat disrupted the hydrogen bonding network within the chitin structure.Subsequently,formic acid(FA)and silicotungstic acid(STA)synergistically catalyzed the conversion to HMF in a biphasic system of 2-methyltetrahydrofuran(2-Me-THF)/H2O,and high yields(40.2%)HMF was obtained under the optimism conditions.The product distribution was analyzed by HPLC-MS and the co-catalysis of FA with STA was evidenced.A dual-function catalytic system with both Lewis and Br?nsted acids was created,the catalytic system that significantly improved the efficiency of complex tandem catalytic reactions with chitin.Based on the experimental results,a possible pathway for chitin conversion was deduced,providing a new catalytic idea for the efficient conversion of chitin to HMF.
基金the National Natural Science Foundation of China(No.22101194 for Z.Song and No.52233015 for J.Cheng)Natural Science Foundation of Jiangsu Province(No.BK20210733 for Z.Song)+1 种基金Suzhou Municipal Science and Technology Bureau(No.ZXL2021447 for Z.Song)Collaborative Innovation Center of Suzhou Nano Science&Technology,the 111 Project.,Joint International Research Laboratory of Carbon-Based Functional Materials and Devices,and Suzhou Key Laboratory of Nanotechnology and Biomedicine.
文摘The recent advances in accelerated polymerization of N-carboxyanhydrides (NCAs) offer an effective strategy to simplify the preparation of polypeptide materials. However, the fine-tuning of polymerization kinetics, which is critical to differentiate the main polymerization and the side reactions, remains largely unexplored. Herein we report the modulation of polymerization rate of NCA in a water/oil biphasic system. By altering the aqueous pH, the initial location of the initiators, and the pK_(a) of initiating amines, we observed the change in polymerization time from several minutes to a few hours. Due to the high interfacial activity and low pKa value, controlled polymerization was observed from multi-amine initiators even if they were initially located in the aqueous phase. This work not only improves our understanding on the biphasic polymerization mechanism, but also facilitates preparation of versatile polypeptide materials.
基金the Science and Engineering Research Board(SERB),Govt.of India,for the financial support(grant number:CRG/2021/005548).
文摘Biphasic layered oxide cathodes,known for their superior electrochemical performance,are prime candidates for commercializing in Na-ion batteries.Herein,we unveil a series of P3/P2 monophasic and biphasic Al-substituted Na_(3/4)Mn_(5-x/8)Al_(2x/8)Ni_(3-x/8)O_(2)layered oxide cathodes that lie along the‘zero Mn^(3+)line’in the Na_(3/4)(Mn-Al-Ni)O_(2)pseudo-ternary system.The structural analysis showed a larger Na^(+)conduction bottleneck area in both P3 and P2 structures with a higher Al3+content,which enhanced their rate performance.In each composition,the P3/P2 biphasic compound with nearly equal fractions of P3 and P2 phases outperformed their monophasic counterparts in almost all electrochemical performance parameters.Operando synchrotron XRD measurements obtained for the monophasic P3 and biphasic P2/P3 samples revealed the absence of the O3 phase during cycling.The high structure stability and faster Na^(+)transport kinetics in the biphasic samples underpins the enhancement of electrochemical properties in the Al-substituted P3/P2 cathodes.These results highlight fixed oxidation state lines as a novel tool to identify and design layered oxide cathodes for Na-ion batteries in pseudo-ternary diagrams involving Jahn-Teller active cations.
基金supported by the Fundamental Research Funds for the Central Universities (TD2011-11,BLYJ201519)Beijing Higher Education Young Elite Teacher Project (YETP0765)+2 种基金National Natural Science Foundation of China (31170556)New Century Excellent Talents in University (NCET-13-0671)State Forestry Administration of China (201204803)~~
文摘A natural attapulgite （ATP）‐based catalyst, sulfated In2O3‐ATP （SO42-/In2O3‐ATP）, was obtained by an impregnation‐calcination method and was used to efficiently and selectively produce the useful platform chemical 5‐hydroxymethylfurfural （HMF） from hexoses. Some important reaction param‐eters were studied, revealing that Lewis and Br-nsted acid sites on SO42-/In2O3‐ATP catalyze glu‐cose isomerization and fructose dehydration. The yields of HMF from glucose and fructose were 40.2%and 46.2%, respectively, using the optimal conditions of 180℃ for 60 min with 10 wt%of solid acid catalyst in a mixture of γ‐valerolactone‐water （9：1）.
基金supported by the National Natural Science Foundation of China(Nos.22278168 and 22276064)the MOE Key Laboratory of Resources and Environmental System Optimization(No.KLRE-KF202205)the Science and Technology Project of Fujian province(No.2022Y3007).
文摘Phase change absorbents based on amine chemical absorption for CO_(2)capture exhibit energy-saving potential,but generally suffer from difficulties in CO_(2)regeneration.Alcohol,characterized as a protic reagent with a low dielectric constant,can provide free protons to the rich phase of the absorbent,thereby facilitating CO_(2)regeneration.In this investigation,N-aminoethylpiperazine(AEP)/sulfolane/H_(2)O was employed as the liquid-liquid phase change absorbent,with alcohol serving as the regulator.First,appropriate ion pair models were constructed to simulate the solvent effect of the CO_(2)products in different alcohol solutions.The results demonstrated that these ion pair products reached the maximum solvation-free energy(△E_(solvation))in the rich phase containing ethanol(EtOH).Desorption experiment results validated that the inclusion of EtOH led to a maximum regeneration rate of 0.00763 mol/min,thus confirming EtOH’s suitability as the preferred regulator.Quantum chemical calculations and^(13)C NMR characterization were performed,revealing that the addition of EtOH resulted in the partial conversion of AEP-carbamate(AEPCOO−)into a new product known as ethyl carbonate(C_(2)H_(5)OCOO−),which enhanced the regeneration reactivity.In addition,the decomposition paths of different CO_(2)products were simulated visually,and every reaction’s activation energy(△E_(act))was calculated.Remarkably,the△E_(act)for the decomposition of C_(2)H_(5)OCOO−(9.465 kJ/mol)was lower than that of the AEPCOO−(26.163 kJ/mol),implying that CO_(2)was more likely to be released.Finally,the regeneration energy consumption of the alcohol-regulated absorbentwas estimated to be only 1.92 GJ/ton CO_(2),which had excellent energy-saving potential.
基金supported by the National Natural Science Foundation of China(No.21805018)by Sichuan Science and Technology Program(Nos.2022ZHCG0018,2023NSFSC0117 and 2023ZHCG0060)Yibin Science and Technology Program(No.2022JB005)and China Postdoctoral Science Foundation(No.2022M722704).
文摘Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+dynamics and rapid capacity decay.In this study,we propose a medium-entropy cathode by simultaneously introducing Fe,Mg,and Li dopants into a typical P2-type Na_(0.75)Ni_(0.25)Mn_(0.75)O_(2)cathode.The modified Na_(0.75)Ni_(0.2125)Mn_(0.6375)Fe_(0.05)Mg_(0.05)Li_(0.05)O_(2)cathode predominantly exhibits a main P2 phase(93.5%)with a minor O3 phase(6.5%).Through spectroscopy techniques and electrochemical investigations,we elucidate the redox mechanisms of Ni^(2+/3+/4+),Mn^(3+/4+),Fe^(3+/4+),and O_(2)-/O_(2)^(n-)during charging/discharging.The medium-entropy doping mitigates the detrimental P2-O_(2)phase transition at high-voltage,replacing it with a moderate and reversible structural evolution(P2-OP4),thereby enhancing structural stability.Consequently,the modified cathode exhibits a remarkable rate capacity of 108.4 mAh·g^(-1)at 10C,with a capacity retention of 99.0%after 200 cycles at 1C,82.5%after 500 cycles at 5C,and 76.7%after 600 cycles at 10C.Furthermore,it also demonstrates superior electrochemical performance at high cutoff voltage of 4.5 V and extreme temperature(55 and 0℃).This work offers solutions to critical challenges in sodium ion batteries cathode materials.
基金supported by the National Natural Science Foundation of China(Project No.82160348)the Yunnan Province Major Special Plan(No.202302AA310018-D-8)+1 种基金the Youth Talent Project of Yunnan Province's“Xingdian Talent Support Program”(No.XDYC-QNRC-2022-0608)the 2024 Senior Health Technology and Medical Discipline Leader of Yunnan Provincial Health Commission(No.D-2024056).
文摘A 63-year-old man was admitted to the hospital with a>1-year history of repeated acid reflux and belching and a 1-month history of an abdominal mass.On admission,the patient was in good condition,and his vital signs were stable.Laboratory examinations revealed no significant abnormalities.
基金supported by the National Natural Science Foundation of China(Nos.22379052,22479062 and 52102252)Taishan Scholars of Shandong Province(No.tsqnz20221143)Independent Cultivation Program of Innovation Team of Ji’nan City(No.202333042).
文摘The unique oxygen stacking sequence of O2-type structures restricts the irreversible transition metal movement into Li vacancies for the delithiated Li-rich layered oxides(LLOs)and maintains outstanding voltage stability.However,the ion-exchange synthesis promotes the Mn-ion valence reduction and aggravates the Jahn-Teller(J-T)distortion alongside disproportionation.Since the main oxidation state of the Mn ions is+4 in the traditional O3-type LLOs,synergistic effects of the O2-type and O3-type structures are expected in the O2/O3 diphasic Li-rich material.Herein,O2/O3 biphasic intergrowth LLOs were rationally designed,and the synergic optimization of the biphasic structure was planned to retard the J-T effect.The O2/O3 intergrowth nature was confirmed,and the percentages of the O2 and O3 phases were 56%and 44%,respectively.Density functional theory calculations demonstrated that the Mn^(2+)(EC)sheath had a remarkably lower energy barrier than the Li^(+)(EC)sheath.This finding suggests that Mn^(2+)ions that are dissolved into the electrolyte accelerate the electrolyte oxidization,so the deposition of the cathode electrolyte interface for pristine O2-LLOs causes a high electrochemical impedance.The designed O2/O3 biphasic LLOs boost the capacity stability and suppress the voltage drop upon repeated Li^(+)de-intercalation.The phase regulation strategy offers great potential for developing low-cost LLOs with enhanced structural stability for advanced Li-ion batteries.
基金supported by the National Key R&D Program of China(2023YFF0614301,2023YFC3707004,and 2018YFB0604302)Fundamental Research Funds for the Central Universities(No.2022MS041)+1 种基金National Natural Science Foundation of China(No.22106084)Tsinghua University Initiative Scientific Research Program(2023Z02JMP001).
文摘An innovative strategy was proposed by integration of membrane contactor(MC)with biphasic solvent for efficient CO_(2) capture from flue gas.The accessible fly ash-based ceramic membrane(CM)underwent hydrophobic modification through silane grafting,followed by fluoroalkylsilane decoration,to prepare the superhydrophobic membrane(CSCM).The CSCM significantly improved resistance to wetting by the biphasic solvent,consisting of amine(DETA)and sulfolane(TMS).Morphological characterizations and chemical analysis revealed the notable enhancements in pore structure and hydrophobic chemical groups for the modified membrane.Predictions of wetting/bubbling behavior based on static wetting theory referred the liquid entry pressure(LEP)of CSCM increased by 20 kPa compared to pristine CM.Compared with traditional amine solvents,the biphasic solvent presented the expected phase separation.Performance experiments demonstrated that the CO_(2) capture efficiency of the biphasic solvent increased by 7%,and the electrical energy required for desorption decreased by 32%.The 60-h continuous testing and supplemental characterization of used membrane confirmed the excellent adaptability and durability of the CSCMs.This study provides a potential approach for accessing hydrophobic ceramic membranes and biphasic solvents for industrial CO_(2) capture.
基金supported by the Key R&D Program of Yunnan Province(No.202303AC100008)the National Natural Science Foundation of China(No.52100133)the Major Science and Technology-Special Plan“Unveiling and Leading”Project of Shanxi Province(No.202201050201011).
文摘The biphasic solvent is a promising solution to reduce regeneration energy consumption in CO_(2) capture.However,most current biphasic solvents suffer from high viscosity and poor desorption of the rich phase.To the issues,a novel pentamethyldiethylenetriamine(PMDETA)-2-amino-2-methyl-1-propanol(AMP)/diethylenetriamine(DETA)-sulfolane biphasic solvent was developed.The mechanism of AMP affecting CO_(2) recycling capacity was analyzed.By adjusting the ratio of AMP and DETA,the absorption and desorption performance were balanced,and the recycling capacity and renewable energy consumption of the absorbent were improved.For the P_(2.4)A_(0.8)D_(0.8)S_(2) biphasic solvent,the CO_(2) loading of the rich phase was 5.87 mol/L,and the proportion of the rich phase volume ratio was 35%,which surpasses most reported biphasic solvents.The viscosity of the absorbent significantly decreased from 527.00 mPa·s to 92.26 mPa·s,attributed to the beneficial effect of AMP.Thermodynamic analysis showed that the biphasic solvent produced a lower regeneration energy consumption of 1.70 GJ/t CO_(2),which was 57%lower than that of monoethanolamine(MEA).Overall,the PMDETA-AMP/DETA-sulfolane biphasic solvent exhibited cycle capacity,which provided new insights for the designing of biphasic solvent.
基金supported by the National Natural Science Foundation of China(no.52374301)the Open Project of Guangxi Key Laboratory of Electrochemical Energy Materials(no.GXUEEM2024001)+2 种基金the Hebei Provincial Natural Science Foundation(no.E2024501010)the Shijiazhuang Basic Research Project(no.241790667A)the Performance subsidy fund for Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province(no.22567627H)。
文摘Sodium-ion batteries(SIBs)have the advantages of environmental friendliness,cost-effectiveness,and high energy density,which are considered one of the most promising candidates for lithium-ion batteries(LIBs).The cathode materials influence the cost and energy output of SIBs.Therefore,the development of advanced cathode materials is crucial for the practical application of SIBs.Among various cathode materials,layered transition metal oxides(LTMOs)have received widespread attention owing to their straightforward preparation,abundant availability,and cost-competitiveness.Notably,layered Fe-based oxide cathodes are deemed to be one of the most promising candidates for the lowest price and easy-to-improve performance.Nevertheless,the challenges such as severe phase transitions,sluggish diffusion kinetics and interfacial degradation pose significant hurdles in achieving high-performance cathodes for SIBs.This review first briefly outlines the classification of layered structures and the working principle of layered oxides.Then,recent advances in modification strategies employed to address current issues with layered iron-based oxide cathodes are systematically reviewed,including ion doping,biphasic engineering and surface modification.Furthermore,the review not only outlines the prospects and development directions for layered Fe-based oxide cathodes but also provides novel insights and directions for future research endeavors for SIBs.
基金supported by the National Natural Science Foundation of China(Grant No.52372281)the Fundamental Research Funds for the Central Universities(2232020G-07)+3 种基金the foundation of Shanghai Institute of Technology(grant no.YJ2022-37)the Graduate Student Innovation Fund of Donghua University(CUSF-DH-D-2022007)the State Key Laboratory of Advanced Fiber Materials(KF2517)the Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning。
文摘Lithium-sulfur(Li-S)batteries promise high energy density but suffer from low conductivity,polysulfide shuttling,and sluggish conversion kinetics.The construction of heterointerfaces is an effective strategy for enhancing both polysulfide adsorption and conversion;however,the poor lattice compatibility in the heterointerface formed by different materials hinders interfacial charge transfer.In response to these challenges,herein,a biphasic homojunction of TiO_(2)enriched with oxygen vacancies and decorated with nitrogen-doped carbon nanotubes(B-TiO_(2-x)@NCNT)was designed to simultaneously enhance adsorption ability and catalytic activity.This homojunction interface composed of rutile(110)and anatase(101)plane exhibits excellent compatibility,and density functional theory(DFT)calculations reveal that this biphasic interface possesses a much higher binding energy to polysulfides compared to single-phase TiO_(2).Additionally,NCNTs are in situ grown on both interior and exterior surfaces of the hollow TiO_(2)nanospheres,facilitating rapid electron transfer for the encapsulated sulfur.The homojunction interface synergistically leverages the oxygen vacancies and highly conductive NCNTs to enhance the bidirectional catalytic activity for polysulfide conversion.Therefore,in this multifunctional sulfur-host,polysulfides are first strongly adsorbed at the homojunction interfaces and subsequently undergo smooth conversion,nucleation,and decomposition,completing a rapid sulfur redox cycle.The assembled Li-S battery delivered a high specific capacity of 1234.3 mAh g^(-1)at 0.2 C,long cycling stability for over 1000 cycles at 5 C with a low decay rate of 0.035%,and exciting areal capacity at a high sulfur loading of 5.6 mg cm^(-2)for 200cycles.
基金The authors would appreciate the financial support provided by Special Fund Project for Central Guidance of Local Scientific and Technological Development through the Grant ZYYD2022C16Major Science and Technology Projects of Xinjiang Uygur Autonomous Region through the Grant 2023A01005-2Natural Science Foundation of Xinjiang Uygur Autonomous Region through the Grant 2022D01C87.
文摘With the development of chemical absorbers,biphasic absorbers have the potential for absorption performance and energy consumption.In this work,a new biphasic absorber composed of tetraethylene pentamine(TEPA)and Diethyl ethanolamine(DEEA)is formed to capture CO_(2).The appropriate stratification boundaries by experimentation are found for orthogonal experiment.The optimum capture CO_(2)conditions are obtained according to the orthogonal design.The ranking of factors affecting the ability and rate to absorb CO_(2)is C(waste flow rate)>A(mass ratio)>B(reaction temperature).The desorption efficiency of the new biphasic absorber reaches 96.66%at 140C.The new biphasic absorber has good recyclability and its energy consumption is 2.23 GJ·t^(-1)CO_(2).Through viscosity experiment,reaction products analyzed by 13C NMR date,functional groups and chemical bonds analyzed by FT-IR date analysis,the mechanisms of CO_(2)absorption and phase transition follow a zwitterionic mechanism.This is a biphasic amine that deserves in-depth study.
基金the funding from the National Natural Science Foundation of China No.52275294the National Key Research and Development Program of China(No.2018YFA0703000)。
文摘Constructing an in vitro vascularized liver tissue model that closely simulates the human liver is crucial for promoting cell proliferation,mimicking physiological heterogeneous structures,and recreating the cellular microenvironment.However,the layer-by-layer printing method is significantly constrained by the rheological properties of the bioink,making it challenging to form complex three-dimensional vascular structures in low-viscosity soft materials.To overcome this limitation,we developed a cross-linkable biphasic embedding medium by mixing low-viscosity biomaterials with gelatin microgel.This medium possesses yield stress and self-healing properties,facilitating efficient and continuous three-dimensional shaping of sacrificial ink within it.By adjusting the printing speed,we controlled the filament diameter,achieving a range from 250μm to 1000μm,and ensuring precise control over ink deposition locations and filament shapes.Using the in situ endothelialization method,we constructed complex vascular structures and ensured close adhesion between hepatocytes and endothelial cells.In vitro experiments demonstrated that the vascularized liver tissue model exhibited enhanced protein synthesis and metabolic function compared to mixed liver tissue.We also investigated the impact of varying vascular densities on liver tissue function.Transcriptome sequencing revealed that liver tissues with higher vascular density exhibited upregulated gene expression in metabolic and angiogenesis-related pathways.In summary,this method is adaptable to various materials,allowing the rheological properties of the supporting bath and the tissue's porosity to be modified using microgels,thus enabling precise regulation of the liver tissue microenvironment.Additionally,it facilitates the rapid construction of three-dimensional vascular structures within liver tissue.The resulting vascularized liver tissue model exhibits enhanced biological functionality,opening new opportunities for biomedical applications.
基金Supported by the National Natural Science Foundation of China(21606154)
文摘Post-combustion CO_2 capture(PCC) process faces significant challenge of high regeneration energy consumption.Biphasic absorbent is a promising alternative candidate which could significantly reduce the regeneration energy consumption because only the CO_2-concentrated phase should be regenerated. In this work, aqueous solutions of triethylenetetramine(TETA) and N,N-diethylethanolamine(DEEA) are found to be efficient biphasic absorbents of CO_2. The effects of the solvent composition, total amine concentration, and temperature on the absorption behavior, as well as the effect of temperature on the desorption behavior of TETA–DEEA–H2 O system were investigated. An aqueous solution of 1 mol·L-1 TETA and 4 mol·L-1 DEEA spontaneously separates into two liquid phases after a certain amount of CO_2 is absorbed and it shows high CO_2 absorption/desorption performance.About 99.4% of the absorbed CO_2 is found in the lower phase, which corresponds to a CO_2 absorption capacity of 3.44 mol·kg-1. The appropriate absorption and desorption temperatures are found to be 30 °C and 90 °C,respectively. The thermal analysis indicates that the heat of absorption of the 1 mol·L-1 TETA and 4 mol·L-1 DEEA solution is-84.38 kJ·(mol CO_2)-1 which is 6.92 kJ·(mol CO_2)-1 less than that of aqueous MEA. The reaction heat, sensible heat, and the vaporization heat of the TETA–DEEA–H2 O system are lower than that of the aqueous MEA, while its CO_2 capacity is higher. Thus the TETA–DEEA–H2 O system is potentially a better absorbent for the post-combustion CO_2 capture process.
基金Supported by the National Natural Science Foundation of China(No.21276033)the Open Foundation of the State Key Laboratory of Bioactive Seaweed Substances(Nos.SKL-BASS1707,SKL-BASS1711)the Liaoning Provincial BaiQianWan Talents Program(No.2017-6)
文摘Immobilization biocatalysis is a potential technology to improve the activity and stability of biocatalysts in nonaqueous systems for efficient industrial production.Alginate-chitosan(AC)microcapsules were prepared as immobilization carriers by emulsifi cation-internal gelation and complexation reaction,and their contribution on facilitating the growth and metabolism of yeast cells were testifi ed successfully in culture medium-solvent biphasic systems.The cell growth in AC microcapsules is superior to that in alginate beads,and the cells in both immobilization carriers maintain much higher activity than free cells,which demonstrates AC microcapsules can confer yeast cells the ability to resist the adverse effect of solvent.Moreover,the performance of AC microcapsules in biphasic systems could be improved by adjusting the formation of outer polyelectrolyte complex(PEC)membrane to promote the cell growth and metabolic ability under the balance of resisting solvent toxicity and permitting substrate diffusion.Therefore,these findings are quite valuable for applying AC microcapsules as novel immobilization carriers to realize the biotransformation of value-added products in aqueous-solvent biphasic systems.
基金supported by the Natural Science Foundation of China (No.21106143)100-talent project of Dalian Institute of Chemical Physics (DICP)the Independent Innovation Foundation of State Key Laboratory of Catalysis (No.R201113)
文摘Phosphoric acid treated niobic acid(NbP)was used for the dehydration of xylose to furfural in biphasic solvent system,which was found to exhibit the best performance among the tested catalysts.The excellent performance of NbP could be explained by the better synergistic cooperation between Bro¨nsted and Lewis acid sites.Moreover,NbP showed good stability and no obvious deactivation or leaching of Nb could be observed after six continuous recycles.
