With the escalating global emphasis on environmental conservation and sustainable development,enhancing the service quality and durability of road surfaces and facilitating the green development of highways have comma...With the escalating global emphasis on environmental conservation and sustainable development,enhancing the service quality and durability of road surfaces and facilitating the green development of highways have commanded considerable attention.Bio-based polyurethane,on account of its remarkable physical and chemical properties,green,sustainable and renewable capacity,as well as its structural design capabilities,has drawn widespread attention and numerous studies have been carried out.It has gradually started to substitute traditional petroleum-based polyurethane materials in road engineering.Nevertheless,the application of bio-based polyurethane materials in road engineering remains in the exploratory phase.To stimulate the application research of bio-based polyurethane materials in road engineering and offer additional research directions,this paper reviews the research advancements of bio-based polyurethane materials and their applications in road engineering.The fundamental classification of bio-based polyurethane is introduced.The characteristics and challenges associated with various preparation methods for bio-based polyurethane are described.The influence of bio-based polyurethane on road engineering materials are analyzed.The evaluation indicators of bio-based polyurethane within the life cycle of road engineering are investigated.Finally,the development tendency towards in road engineering applications are forecasted.This paper provides a reference for the study of bio-based polyurethane materials in road engineering applications.展开更多
Incorporation of acetal groups in the backbone is a potent strategy to create polymers that are cleavable or degradable under acidic conditions.We report here an in-depth study on the ring-closing-opening copolymeriza...Incorporation of acetal groups in the backbone is a potent strategy to create polymers that are cleavable or degradable under acidic conditions.We report here an in-depth study on the ring-closing-opening copolymerization of o-phthalaldehyde(OPA)and epoxide using Lewis pair type two-component organocatalysts for producing acetal-functionalized polyether and polyurethane.Notably,triethylborane as the Lewis acid,in comparison with tri(n-butyl)borane,more effectively enhances the polymerization activity by mitigating borane-induced reduction of the aldehyde group into extra initiating(borinic ester)species.Density functional theory(DFT)calculations present comparable energy barriers of OPA-epoxide cross-propagation and epoxide self-propagation,which is consistent with the experimental finding that an alternating-rich copolymer comprising mostly OPA-epoxide units but also epoxide-epoxide linkages is produced.In particular,when epoxide is added in a large excess,the product becomes a polyether containing acetal functionalities in the central part of the backbone and thus being convertible into polyurethane with refined acid degradability.展开更多
The current global shortage of oil resources and the pollution problems caused by traditional barrier materials urgently require the search for new substitutes.Biodegradable bio-based barrier materials possess the cha...The current global shortage of oil resources and the pollution problems caused by traditional barrier materials urgently require the search for new substitutes.Biodegradable bio-based barrier materials possess the characteristics of being renewable,environmentally friendly,and having excellent barrier properties.They have become an important choice in fields such as food packaging,agricultural film covering,and medical protection.This review systematically analyzes the design and research of this type of material,classifying biobased and biodegradable barrier materials based on the sources of raw materials and synthesis pathways.It also provides a detailed introduction to the latest research progress of biobased and biodegradable barrier materials,discussing the synthesis methods and improvement measures of their barrier properties.Subsequently,it analyzes the related technologies for enhancing the barrier properties of biobased and biodegradable barrier materials,and finally looks forward to the directions that future research should focus on,promoting the transition of biobased and biodegradable barrier materials from the laboratory to industrial applications.展开更多
The demand for energy-efficient and environmental-friendly power grid construction has made the exploitation of bio-based electrical epoxy resins with excellent properties increasingly important.This work developed th...The demand for energy-efficient and environmental-friendly power grid construction has made the exploitation of bio-based electrical epoxy resins with excellent properties increasingly important.This work developed the bio-based electrotechnical epoxy resins based on magnolol.High-performance epoxy resin(DGEMT)with a double crosslinked points and its composites(Al_(2)O_(3)/DGEMT)were obtained taking advantages of the two bifunctional groups(allyl and phenolic hydroxyl groups)of magnolol.Benefitting from the distinctive structure of DGEMT,the Al_(2)O_(3)/DGEMT composites exhibited the advantages of intrinsically high thermal conductivity,high insulation,and low dielectric loss.The AC breakdown strength and thermal conductivity of Al_(2)O_(3)/DGEMT composites were 35.5 kV/mm and 1.19 W·m-1·K-1,respectively,which were 15.6%and 52.6%higher than those of petroleum-based composites(Al_(2)O_(3)/DGEBA).And its dielectric loss tanδ=0.0046 was 20.7%lower than that of Al_(2)O_(3)/DGEBA.Furthermore,the mechanical,thermal and processing properties of Al_(2)O_(3)/DGEMT are fully comparable to those of Al_(2)O_(3)/DGEBA.This work confirms the feasibility of manufacturing environmentally friendly power equipment using bio-based epoxy resins,which has excellent engineering applications.展开更多
By investigating the performance characteristics of the bio-based surfactant 8901A,a composite decontamination and injection system was developed using 8901A as the primary agent,tailored for application in low-permea...By investigating the performance characteristics of the bio-based surfactant 8901A,a composite decontamination and injection system was developed using 8901A as the primary agent,tailored for application in low-permeability and heavy oil reservoirs under varying temperature conditions.The results demonstrate that this system effectively reduces oil–water interfacial tension,achieving an ultra-low interfacial tension state.The static oil washing efficiency of oil sands exceeds 85%,the average pressure reduction rate reaches 21.55%,and the oil recovery rate improves by 13.54%.These enhancements significantly increase the system’s ability to dissolve oilbased blockages,thereby lowering water injection pressure caused by organic fouling,increasing the injection volume of injection wells,and ultimately improving oil recovery efficiency.展开更多
Aging plays a critical role in determining the durability and long-term performance of asphalt pavements,as it is influenced by both external factors(e.g.,temperature,ultraviolet(UV)radiation,moisture,oxidative gases)...Aging plays a critical role in determining the durability and long-term performance of asphalt pavements,as it is influenced by both external factors(e.g.,temperature,ultraviolet(UV)radiation,moisture,oxidative gases)and internal factors such as binder composition.Although laboratory simulations of aging are well established for conventional bituminous binders,limited attention has been paid to replicating and evaluating aging processes in bio-based binders.This review provides a comprehensive analysis of current laboratory techniques for simulating and assessing binder aging,with a focus on two key areas:aging simulation protocols and evaluation methodologies.The analysis shows that although several efforts have been made to incorporate external aging factors into lab simulations,significant challenges persist,especially in the case of bio-based binders,which are characterized by a high variability in composition and limited understanding of their aging behavior.Current evaluation approaches also exhibit limitations.Improvements are needed in the molecular-level analysis of oxidation(e.g.,through more representative oxidation modelsin molecular dynamicssimulations),in the separation and quantification of binder constituents,and in the application of advanced techniques such as fluorescence microscopy to better characterize polymer dispersion.To enhance the reliability of laboratory simulations,future research should aim to improve the correlation between laboratory and field aging,define robust aging indexes,and refine characterization methods.These advancements are particularly critical for bio-based binders,whose performance is highly sensitive to aging and for which standard test protocols are still underdeveloped.A deeper understanding of aging mechanisms in both polymer-modified and biobased binders,along with improved analytical tools for assessing oxidative degradation and morphological changes,will be essential to support the development of sustainable,high-performance paving materials.展开更多
In the context of transitioning toward more sustainable construction materials,this study explores the impact of incorporating millet husks as an alternative to sand on the physical,mechanical,and thermal performance ...In the context of transitioning toward more sustainable construction materials,this study explores the impact of incorporating millet husks as an alternative to sand on the physical,mechanical,and thermal performance of lightweight concrete.Through a mixture design approach,five formulations were selected and thoroughly characterized.The analysis of iso-response curves enabled an in-depth assessment of the cross-effects between formulation parameters and their interactions on the final properties of the material.The results show that integrating millet husks leads to a significant reduction in density,reaching up to 21%,while maintaining notable mechanical performance.A balanced formulation of sand and fibers achieved a maximum compressive strength of 12.11 MPa,demonstrating that,under specific conditions,plant fibers actively contribute to the structural integrity of the composite.In tensile strength,the positive influence of fibers is even more pronounced,with a maximum resistance of 8.62 MPa,highlighting their role in enhancing material cohesion.From a thermal perspective,millet husks reduce both thermal conductivity and effusivity,thereby limiting heat transfer and accumulation within the composite.Iso-response curve analysis reveals that these effects are directly linked to the proportions of the constituents and that achieving an optimal balance between sand,fibers,and cement is key to maximizing performance.These findings demonstrate that the adopted approach allows moving beyond conventional substitution methods by identifying optimal configurations for the design of lightweight bio-based concretes that are both strong and insulating,thereby confirming the potential of millet husks in developing lightweight concretes suitable for sustainable construction applications.展开更多
An efficient and novel approach is proposed for oxidative arylation of bio-based furfuryl alcohol(FA)to aryl furans(AFs),a versatile monomer of photoelectric materials,in the presence of UiO-67-Pd(F)with phenanthrolin...An efficient and novel approach is proposed for oxidative arylation of bio-based furfuryl alcohol(FA)to aryl furans(AFs),a versatile monomer of photoelectric materials,in the presence of UiO-67-Pd(F)with phenanthroline/bipyridine,and poly-F substituted phenyl ligands as the mixture linkers.The results of control experiments and theoretical calculations reveal that the–F on the phenyl linkers efficiently tunes the electron-deficient nature of Pd through the Zr_(6) clusters bridges,which favors the adsorption and activation of the furan ring.Furthermore,the conjugation of different nitrogen-containing ligands facilitates Pd coordination for the Heck-type insertion and subsequent electrophilic palladation,respectively.As a result,the oxidative arylation of FA derivatives is substantially enhanced because of these electronic and steric synergistic effects.Under the optimized conditions,72.2%FA conversion and 74.8%mono aryl furan(MAF)selectivity are shown in the Heck-type insertion.Meanwhile,85.3%of MAF is converted,affording 74.8%selectivity of final product(AFs)in the subsequent electrophilic palladation reaction.This process efficiency is remarkably higher than that with homogeneous catalysts.In addition,furan-benzene polymer obtained from the halogen-free synthesis catalyzed by UiO-67-Pd(F)show significantly better properties than that from conventional Suzuki coupling method.Therefore,the present work provides a new insight for useful AFs synthesis by oxidative arylation of bio-furan via rational tunning the metal center micro-environment of heterogeneous catalyst.展开更多
The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/M...The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/MS). PGC was applied to study the F t curve of the multiblock copolymer and PGC/MS was used to separate and identify the pyrolyzates. DTA experiment was used to study the decomposition temperature. The results show that the beginning point of elastomer’s decomposition was about 300?℃ and the decomposition temperature of most of the sample was 550?℃. Many pyrolyzates were produced because of the breaking of weak bonds in the sample. The possible microstructure was verified and the pyrolysis pathway of the copolymer was investigated.展开更多
A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly...A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly（ethylene glycol）.The influences of the n-alkylene inserted in aminophenyl of flexible amino-terminated polythers（ATPE） on the mechanical properties,fractographs and curing kinetics of the ATPE-DGEBA cured products were studied.The results show that the insertion of n-alkylene group into the aminophenyl group of the ATPE,on one hand,can significantly increase the strain relaxation rate and decrease glass transition temperature of the ATPE-DGEBA cured products,resulting in slight decrease of the Young’s modulus and tensile strength,and significant increase of the toughness and elongation of the ATPE-DGEBA cured products.On the other hand,it can remarkably enhance the reactivity of amine with epoxy,much accelerating the curing rate of the ATPE-DGEBA systems.The activation energy of DGEBA cured by BAPTPE,BAMPTPE and BAEPTPE was 53.1,28.5 and 25.4 kJ·mol;,respectively.The as-obtained ATPE-DGEBA cured products are homogeneous, transparent,and show excellent mechanical properties including tensile strength and toughness.Thus they are promising to have important applications in structure adhesives,casting bulk materials,functional coatings,cryogenic engineering, damping and sound absorbing materials.展开更多
A novel liquid hyperbranched polyether epoxy （HBPEE） based on commercially available hydroquinone （HQ） and 1,1,1-trihydroxymethylpropane triglycidyl ether （TMPGE） was synthesized through an A2 ＋ B3 one-step pro...A novel liquid hyperbranched polyether epoxy （HBPEE） based on commercially available hydroquinone （HQ） and 1,1,1-trihydroxymethylpropane triglycidyl ether （TMPGE） was synthesized through an A2 ＋ B3 one-step proton transfer polymerization. In order to improve the toughness, the synthesized HBPEE was mixed with diglycidyl ether of bisphenol A （DGEBA） in different ratios to form hybrids and cured with triethylenetetramine （TETA）. Thermal and mechanical properties of the cured hybrids were evaluated. Results show that addition of HBPEE can improve the toughness of cured hybrids remarkably at 〈 20 wt% loading, without compromising the tensile strength. However, the glass transition temperature （Tg） of the cured hybrids decreases with increasing HBPEE content. Fracture surface images from scanning electron microscope show oriented fibrils in hybrids containing HBPEE. The formation and orientation of the fibrils can absorb energy under impact and lead to an improvement of toughness. Furthermore, based on the morphology of fractured surfaces and the single Tg in each hybrid, no sign of phase separation was found in the cured hybrid systems. As a result, the toughening mechanism could be explained by in situ homogeneous toughening mechanism rather than phase separation mechanism.展开更多
[Objectives] This study was conducted to establish an LC-MS/MS method for the determination of three kinds of polyether residues in eggs with QuEChERS dSPE EMR-Lipid as a pretreatment method, which was established acc...[Objectives] This study was conducted to establish an LC-MS/MS method for the determination of three kinds of polyether residues in eggs with QuEChERS dSPE EMR-Lipid as a pretreatment method, which was established according to Agilent Bond Elut enhanced lipid removal EMR-Lipid technology. [ Methods] Egg was extracted by acidified acetonitrile, purified by Bond Elut EMR-Lipid QuEChERS, and detected by HPLC-MS/MS. [ Results] The three kinds of polyether residues had good linear relationships in the range of 2.0 - 100 μg/L with peak areas, r 〉 0. 999. The recoveries ranged from 84.6% to 107.0%. [ Conclusions ] The method is convenient and accurate, and the quantitative results are accurate and reproducible. It is suitable for the determination of the three kinds of polyether residues in eggs.展开更多
It is essential to design economic and efficient tougheners to prepare high-performance epoxy resin;however,this has remained a huge challenge.Herein,an eco-friendly,low-cost,and facile-fabricated bio-based hyperbranc...It is essential to design economic and efficient tougheners to prepare high-performance epoxy resin;however,this has remained a huge challenge.Herein,an eco-friendly,low-cost,and facile-fabricated bio-based hyperbranched toughener,carboxylic acid-functionalized tannic acid(CATA),was successfully prepared and applicated to the preparation of solvent-free epoxy resins.The mechanical performance,morphology,structural characterization,and thermal characterization of toughened epoxy resin system were studied.The toughened epoxy resin system with only 1.0wt%CATA reached the highest impact strength,111%higher than the neat epoxy resin system.Notably,the tensile strength and elongation at break of toughened epoxy resin systems increased moderately with increasing CATA loading.Nonphase-separated hybrids with significant toughening effect were obtained.Additionally,the thermal stabilities of toughened epoxy resin systems decreased with increasing CATA loading.This study provides an eco-friendly,cost-effective,and facile approach for the preparation of high-performance,solvent-free epoxy resins with potential for practical applications in sealing integrated circuits and electrical devices fields.展开更多
In this work, a series of high performance bio-based polyurethanes（bio-PUs） were synthesized from polylactide（PLA）-based diols, different diisocyanates（TDI, MDI, HDI, IPDI） and chain extender 1,4-butanediol, in ...In this work, a series of high performance bio-based polyurethanes（bio-PUs） were synthesized from polylactide（PLA）-based diols, different diisocyanates（TDI, MDI, HDI, IPDI） and chain extender 1,4-butanediol, in which different soft and hard segments are used to adjust their transition temperatures and mechanical properties. Poly（lactide-co-caprolactone）copolymer diols（co-PLAols） instead of PLA diols as the soft segment improved the thermal stability and mechanical properties of the synthesized bio-PUs. Among them, MDI-based bio-PUs have the highest T_g（43.8 °C）, tensile strength（23.5 MPa） and modulus（380.8 MPa）, while HDI-based bio-PUs have the lowest T_g（21.4 °C） and highest elongation at break（580%）. Especially, the bio-PUs synthesized from co-PLAols and MDI demonstrate better mechanical properties,closed to petroleum-based commodities. Furthermore, the obtained bio-PUs display good shape memory properties at body temperature and cytocompatibility. Therefore, these bio-PUs are promising for applications in biomedical fields.展开更多
In this study, monoglycidyl silyl etherated eugenol(GSE) was synthesized as reactive epoxy diluent, and the chemical structure of GSE, intermediates, and products were characterized by Fourier transform infrared spect...In this study, monoglycidyl silyl etherated eugenol(GSE) was synthesized as reactive epoxy diluent, and the chemical structure of GSE, intermediates, and products were characterized by Fourier transform infrared spectroscopy(FTIR) and nuclear magnetic resonance(~1 H-NMR). GSE existed as a potential bio-based reactive diluent for petroleum-based epoxy resin. The curing kinetics of EP/HHPA/GSE system was studied by non-isothermal DSC method. The kinetics parameters were calculated by using the Kissinger model, Crane model, Ozawa model, and β-T(temperature-heating rate) extrapolation, respectively. In addition, the effects of GSE on the thermo-mechanical properties and thermal stability of EP/HHPA/GSE systems were studied, indicating that GSE can effectively improve the toughness and thermal decomposition temperature of the epoxy system.展开更多
Many natural fibers are lightweight and display remarkable strength and toughness.These properties originate from the fibers’hierarchical structures,assembled from the molecular to macroscopic scale.The natural spinn...Many natural fibers are lightweight and display remarkable strength and toughness.These properties originate from the fibers’hierarchical structures,assembled from the molecular to macroscopic scale.The natural spinning systems that produce such fibers are highly energy efficient,inspiring researchers to mimic these processes to realize robust artificial spinning.Significant developments have been achieved in recent years toward the preparation of high-performance bio-based fibers.Beyond excellent mechanical properties,bio-based fibers can be functionalized with a series of new features,thus expanding their sophisticated applications in smart textiles,electronic sensors,and biomedical engineering.Here,recent progress in the construction of bio-based fibers is outlined.Various bioinspired spinning methods,strengthening strategies for mechanically strong fibers,and the diverse applications of these fibers are discussed.Moreover,challenges in reproducing the mechanical performance of natural systems and understanding their dynamic spinning process are presented.Finally,a perspective on the development of biological fibers is given.展开更多
Polyvinyl alcohol (PVA) has been widely used in the fields of medical, food and packaging due to its excellentbiocompatibility, good fiber-forming and film-forming properties. However, the high flammability of PVA has...Polyvinyl alcohol (PVA) has been widely used in the fields of medical, food and packaging due to its excellentbiocompatibility, good fiber-forming and film-forming properties. However, the high flammability of PVA hasgreatly limited its wider applications. The flame-retardant PVA was prepared by melt blending of a bio-basedflame retardant (prepared from lignin, phosphoric acid and carbamide) with thermoplastic PVA (TPVA). Thechemical structure, morphology, thermal properties, mechanical properties, fire property and fluidity of thisflame retardant PVA were investigated by Fourier transform infrared spectrometer(FTIR), field emission scanning electron microscope(SEM), thermogravimetric analyzer(TGA), impact tester, universal testing machine,horizontal-vertical burning tester, limiting oxygen indexer(LOI) and melt flow rate meter(MFR). The resultsshowed that the prepared flame retardant had good compatibility with the PVA substrate;The impact strength,melt flow rate, fire property and char residue of this PVA material increased with the content of bio-based flameretardant. When the content of flame retardant was of 20%, the five indices including impact strength, meltflow rate, UL-94 level, LOI and char residual were 11.3 KJ/m^(2), 21.2 g/10 min, V-0 UL-94 level, 33.1%, and19.2%, respectively. This research can promote the high-value utilization of lignin and the application ofPVA in the fields of fire protection.展开更多
Catalytic hydrogenation of SBS was performed for the first time in polyether molten salt with Ru/TPPTS complex as catalyst. Experimental results showed that the hydrogenation degree can be enhanced significantly by th...Catalytic hydrogenation of SBS was performed for the first time in polyether molten salt with Ru/TPPTS complex as catalyst. Experimental results showed that the hydrogenation degree can be enhanced significantly by the addition of triphenylphosphine (TPP). When the molar ratio of TPP, TPPTS and Ru is 2:5:1, 89% hydrogenation degree can be achieved after 12 h under reaction conditions of 5.0 MPa and 150°C. The ionic liquid containing catalyst can be reused three times without obvious changes in the catalytic selectivity and activity.展开更多
Three new catalysts based on the silica gel supported polyether ionic liquids(ILs), i.e., [HO-PECH-MIM]ClSi, [H2N-PECH-MIM]Cl-Si, and [HOOC-PECH-MIM]Cl-Si, were prepared, and their chemical structures were characteriz...Three new catalysts based on the silica gel supported polyether ionic liquids(ILs), i.e., [HO-PECH-MIM]ClSi, [H2N-PECH-MIM]Cl-Si, and [HOOC-PECH-MIM]Cl-Si, were prepared, and their chemical structures were characterized by infrared(IR) spectroscopy and nuclear magnetic resonance(NMR) spectroscopy. Thermogravimetric analyzer(TG), X-ray diffractometer(XRD) and scanning electron microscope(SEM) were used to evaluate their thermal stability,crystalline structure and apparent morphology, respectively. Surface areas of the prepared catalysts were calculated by the Brunauer-Emmett-Teller(BET) method. The catalytic reaction for the synthesis of propylene carbonate(PC) using CO_2 and propylene oxide(PO) in the presence of the prepared catalysts was studied. The influences of times of recycling and catalyst structure on catalytic performance were also investigated. The experimental results showed that the silica gel supported polyether ILs catalysts successfully prepared under mild condition could possess the advantages of high activity, excellent thermal stability, good selectivity and easy recycling, while the phase transition of the liquid polyether ILs catalysts was also achieved. When the reaction temperature was 90 °C, the CO_2 pressure was 2.0 MPa and the dosage of the catalyst was 2.5%, [HOOC-PECH-MIM]Cl-Si was found to have the best catalytic performance in the catalytic process, with the conversion rate reaching 100% and the selectivity equating to 98.2%. The conversion rate and selectivity still could reach more than 90% even after the catalyst was reused for 15 times.展开更多
Elastic bio-based waterproof and breathable membranes(EBWBMs) allow the passage of water vapor effectively and resist the penetration of liquid water,making it ideal for use under extreme conditions.In this study,we u...Elastic bio-based waterproof and breathable membranes(EBWBMs) allow the passage of water vapor effectively and resist the penetration of liquid water,making it ideal for use under extreme conditions.In this study,we used a facile strategy to design the bio-based polyurethane(PU) nanofibrous membranes with the nanoscale porous structure to provide the membranes with high waterproof and breathable performances.The optimization of nanofibrous membrane formation was accomplished by controlling the relative ambient humidity to modulate the cooperating effects of charge dissipation and non-solvent-induced phase separation.The obtained EBWBMs showed multiple functional properties,with a hydrostatic pressure of 86.41 kPa and a water vapor transmission(WVT) rate of 10.1 kg·m^(-2)·d^(-1).After 1 000 cycles of stretching at 40% strain,the EBWBMs retained over 59% of the original maximum stress and exhibited an ideal elasticity recovery ratio of 85%.Besides,even after 80% deformation,the EBWBMs still maintained a hydrostatic pressure of 30.65 kPa and a WVT rate of 13.6 kg·m^(-2)·d^(-1),suggesting that bio-based PU nanofibrous membranes could be used for protection under extreme conditions.展开更多
基金supported by the Key R&D Project in Shaanxi Province(No.2024GX-YBXM-371)Shaanxi Qinchuangyuan Scientists+Engineers Team Construction Project(2025QCY-KXJ-141).
文摘With the escalating global emphasis on environmental conservation and sustainable development,enhancing the service quality and durability of road surfaces and facilitating the green development of highways have commanded considerable attention.Bio-based polyurethane,on account of its remarkable physical and chemical properties,green,sustainable and renewable capacity,as well as its structural design capabilities,has drawn widespread attention and numerous studies have been carried out.It has gradually started to substitute traditional petroleum-based polyurethane materials in road engineering.Nevertheless,the application of bio-based polyurethane materials in road engineering remains in the exploratory phase.To stimulate the application research of bio-based polyurethane materials in road engineering and offer additional research directions,this paper reviews the research advancements of bio-based polyurethane materials and their applications in road engineering.The fundamental classification of bio-based polyurethane is introduced.The characteristics and challenges associated with various preparation methods for bio-based polyurethane are described.The influence of bio-based polyurethane on road engineering materials are analyzed.The evaluation indicators of bio-based polyurethane within the life cycle of road engineering are investigated.Finally,the development tendency towards in road engineering applications are forecasted.This paper provides a reference for the study of bio-based polyurethane materials in road engineering applications.
基金financially supported by the National Key R&D Program of China(No.2022YFC2805103)the National Natural Science Foundation of China(Nos.52022031 and 52263001)the Foundation from Qinghai Science and Technology Department(No.2022-ZJ-944Q)。
文摘Incorporation of acetal groups in the backbone is a potent strategy to create polymers that are cleavable or degradable under acidic conditions.We report here an in-depth study on the ring-closing-opening copolymerization of o-phthalaldehyde(OPA)and epoxide using Lewis pair type two-component organocatalysts for producing acetal-functionalized polyether and polyurethane.Notably,triethylborane as the Lewis acid,in comparison with tri(n-butyl)borane,more effectively enhances the polymerization activity by mitigating borane-induced reduction of the aldehyde group into extra initiating(borinic ester)species.Density functional theory(DFT)calculations present comparable energy barriers of OPA-epoxide cross-propagation and epoxide self-propagation,which is consistent with the experimental finding that an alternating-rich copolymer comprising mostly OPA-epoxide units but also epoxide-epoxide linkages is produced.In particular,when epoxide is added in a large excess,the product becomes a polyether containing acetal functionalities in the central part of the backbone and thus being convertible into polyurethane with refined acid degradability.
基金supported by the Science and Technology Research Project of Henan Province(222102230031)Key Scientific Research Projects of Colleges and Universities in Henan Province(23A430018)Natural Science Foundation of Henan(252300420267).
文摘The current global shortage of oil resources and the pollution problems caused by traditional barrier materials urgently require the search for new substitutes.Biodegradable bio-based barrier materials possess the characteristics of being renewable,environmentally friendly,and having excellent barrier properties.They have become an important choice in fields such as food packaging,agricultural film covering,and medical protection.This review systematically analyzes the design and research of this type of material,classifying biobased and biodegradable barrier materials based on the sources of raw materials and synthesis pathways.It also provides a detailed introduction to the latest research progress of biobased and biodegradable barrier materials,discussing the synthesis methods and improvement measures of their barrier properties.Subsequently,it analyzes the related technologies for enhancing the barrier properties of biobased and biodegradable barrier materials,and finally looks forward to the directions that future research should focus on,promoting the transition of biobased and biodegradable barrier materials from the laboratory to industrial applications.
基金supported by the China Postdoctoral Science Foundation(No.2023M743622)Natural Science Foundation of Ningbo City(No.2024J109)+2 种基金National Natural Science Foundation of China(Nos.E52307038 and U23A20589)Ningbo 2025 Key Scientific Research Programs(Nos.2022Z111,2022Z160 and 2022Z198)the Leading Innovativeand Entrepreneur Team Introduction Program of Zhejiang(No.2021R01005).
文摘The demand for energy-efficient and environmental-friendly power grid construction has made the exploitation of bio-based electrical epoxy resins with excellent properties increasingly important.This work developed the bio-based electrotechnical epoxy resins based on magnolol.High-performance epoxy resin(DGEMT)with a double crosslinked points and its composites(Al_(2)O_(3)/DGEMT)were obtained taking advantages of the two bifunctional groups(allyl and phenolic hydroxyl groups)of magnolol.Benefitting from the distinctive structure of DGEMT,the Al_(2)O_(3)/DGEMT composites exhibited the advantages of intrinsically high thermal conductivity,high insulation,and low dielectric loss.The AC breakdown strength and thermal conductivity of Al_(2)O_(3)/DGEMT composites were 35.5 kV/mm and 1.19 W·m-1·K-1,respectively,which were 15.6%and 52.6%higher than those of petroleum-based composites(Al_(2)O_(3)/DGEBA).And its dielectric loss tanδ=0.0046 was 20.7%lower than that of Al_(2)O_(3)/DGEBA.Furthermore,the mechanical,thermal and processing properties of Al_(2)O_(3)/DGEMT are fully comparable to those of Al_(2)O_(3)/DGEBA.This work confirms the feasibility of manufacturing environmentally friendly power equipment using bio-based epoxy resins,which has excellent engineering applications.
文摘By investigating the performance characteristics of the bio-based surfactant 8901A,a composite decontamination and injection system was developed using 8901A as the primary agent,tailored for application in low-permeability and heavy oil reservoirs under varying temperature conditions.The results demonstrate that this system effectively reduces oil–water interfacial tension,achieving an ultra-low interfacial tension state.The static oil washing efficiency of oil sands exceeds 85%,the average pressure reduction rate reaches 21.55%,and the oil recovery rate improves by 13.54%.These enhancements significantly increase the system’s ability to dissolve oilbased blockages,thereby lowering water injection pressure caused by organic fouling,increasing the injection volume of injection wells,and ultimately improving oil recovery efficiency.
文摘Aging plays a critical role in determining the durability and long-term performance of asphalt pavements,as it is influenced by both external factors(e.g.,temperature,ultraviolet(UV)radiation,moisture,oxidative gases)and internal factors such as binder composition.Although laboratory simulations of aging are well established for conventional bituminous binders,limited attention has been paid to replicating and evaluating aging processes in bio-based binders.This review provides a comprehensive analysis of current laboratory techniques for simulating and assessing binder aging,with a focus on two key areas:aging simulation protocols and evaluation methodologies.The analysis shows that although several efforts have been made to incorporate external aging factors into lab simulations,significant challenges persist,especially in the case of bio-based binders,which are characterized by a high variability in composition and limited understanding of their aging behavior.Current evaluation approaches also exhibit limitations.Improvements are needed in the molecular-level analysis of oxidation(e.g.,through more representative oxidation modelsin molecular dynamicssimulations),in the separation and quantification of binder constituents,and in the application of advanced techniques such as fluorescence microscopy to better characterize polymer dispersion.To enhance the reliability of laboratory simulations,future research should aim to improve the correlation between laboratory and field aging,define robust aging indexes,and refine characterization methods.These advancements are particularly critical for bio-based binders,whose performance is highly sensitive to aging and for which standard test protocols are still underdeveloped.A deeper understanding of aging mechanisms in both polymer-modified and biobased binders,along with improved analytical tools for assessing oxidative degradation and morphological changes,will be essential to support the development of sustainable,high-performance paving materials.
文摘In the context of transitioning toward more sustainable construction materials,this study explores the impact of incorporating millet husks as an alternative to sand on the physical,mechanical,and thermal performance of lightweight concrete.Through a mixture design approach,five formulations were selected and thoroughly characterized.The analysis of iso-response curves enabled an in-depth assessment of the cross-effects between formulation parameters and their interactions on the final properties of the material.The results show that integrating millet husks leads to a significant reduction in density,reaching up to 21%,while maintaining notable mechanical performance.A balanced formulation of sand and fibers achieved a maximum compressive strength of 12.11 MPa,demonstrating that,under specific conditions,plant fibers actively contribute to the structural integrity of the composite.In tensile strength,the positive influence of fibers is even more pronounced,with a maximum resistance of 8.62 MPa,highlighting their role in enhancing material cohesion.From a thermal perspective,millet husks reduce both thermal conductivity and effusivity,thereby limiting heat transfer and accumulation within the composite.Iso-response curve analysis reveals that these effects are directly linked to the proportions of the constituents and that achieving an optimal balance between sand,fibers,and cement is key to maximizing performance.These findings demonstrate that the adopted approach allows moving beyond conventional substitution methods by identifying optimal configurations for the design of lightweight bio-based concretes that are both strong and insulating,thereby confirming the potential of millet husks in developing lightweight concretes suitable for sustainable construction applications.
文摘An efficient and novel approach is proposed for oxidative arylation of bio-based furfuryl alcohol(FA)to aryl furans(AFs),a versatile monomer of photoelectric materials,in the presence of UiO-67-Pd(F)with phenanthroline/bipyridine,and poly-F substituted phenyl ligands as the mixture linkers.The results of control experiments and theoretical calculations reveal that the–F on the phenyl linkers efficiently tunes the electron-deficient nature of Pd through the Zr_(6) clusters bridges,which favors the adsorption and activation of the furan ring.Furthermore,the conjugation of different nitrogen-containing ligands facilitates Pd coordination for the Heck-type insertion and subsequent electrophilic palladation,respectively.As a result,the oxidative arylation of FA derivatives is substantially enhanced because of these electronic and steric synergistic effects.Under the optimized conditions,72.2%FA conversion and 74.8%mono aryl furan(MAF)selectivity are shown in the Heck-type insertion.Meanwhile,85.3%of MAF is converted,affording 74.8%selectivity of final product(AFs)in the subsequent electrophilic palladation reaction.This process efficiency is remarkably higher than that with homogeneous catalysts.In addition,furan-benzene polymer obtained from the halogen-free synthesis catalyzed by UiO-67-Pd(F)show significantly better properties than that from conventional Suzuki coupling method.Therefore,the present work provides a new insight for useful AFs synthesis by oxidative arylation of bio-furan via rational tunning the metal center micro-environment of heterogeneous catalyst.
文摘The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/MS). PGC was applied to study the F t curve of the multiblock copolymer and PGC/MS was used to separate and identify the pyrolyzates. DTA experiment was used to study the decomposition temperature. The results show that the beginning point of elastomer’s decomposition was about 300?℃ and the decomposition temperature of most of the sample was 550?℃. Many pyrolyzates were produced because of the breaking of weak bonds in the sample. The possible microstructure was verified and the pyrolysis pathway of the copolymer was investigated.
基金supported by the National 863 Plan(No.2006AA03A209)New Century Excellent Talent Plan (No.NECT-05-0660) from Ministry of EducationDefense Basic Research Item(No.D1420061057)
文摘A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly（ethylene glycol）.The influences of the n-alkylene inserted in aminophenyl of flexible amino-terminated polythers（ATPE） on the mechanical properties,fractographs and curing kinetics of the ATPE-DGEBA cured products were studied.The results show that the insertion of n-alkylene group into the aminophenyl group of the ATPE,on one hand,can significantly increase the strain relaxation rate and decrease glass transition temperature of the ATPE-DGEBA cured products,resulting in slight decrease of the Young’s modulus and tensile strength,and significant increase of the toughness and elongation of the ATPE-DGEBA cured products.On the other hand,it can remarkably enhance the reactivity of amine with epoxy,much accelerating the curing rate of the ATPE-DGEBA systems.The activation energy of DGEBA cured by BAPTPE,BAMPTPE and BAEPTPE was 53.1,28.5 and 25.4 kJ·mol;,respectively.The as-obtained ATPE-DGEBA cured products are homogeneous, transparent,and show excellent mechanical properties including tensile strength and toughness.Thus they are promising to have important applications in structure adhesives,casting bulk materials,functional coatings,cryogenic engineering, damping and sound absorbing materials.
基金supported by the Natural Science Foundation of Beijing(No.2092023)National Natural Science Foundation of China(No.51173012)the Fundamental Research Funds for the Central Universities(No.ZZ0912)
文摘A novel liquid hyperbranched polyether epoxy （HBPEE） based on commercially available hydroquinone （HQ） and 1,1,1-trihydroxymethylpropane triglycidyl ether （TMPGE） was synthesized through an A2 ＋ B3 one-step proton transfer polymerization. In order to improve the toughness, the synthesized HBPEE was mixed with diglycidyl ether of bisphenol A （DGEBA） in different ratios to form hybrids and cured with triethylenetetramine （TETA）. Thermal and mechanical properties of the cured hybrids were evaluated. Results show that addition of HBPEE can improve the toughness of cured hybrids remarkably at 〈 20 wt% loading, without compromising the tensile strength. However, the glass transition temperature （Tg） of the cured hybrids decreases with increasing HBPEE content. Fracture surface images from scanning electron microscope show oriented fibrils in hybrids containing HBPEE. The formation and orientation of the fibrils can absorb energy under impact and lead to an improvement of toughness. Furthermore, based on the morphology of fractured surfaces and the single Tg in each hybrid, no sign of phase separation was found in the cured hybrid systems. As a result, the toughening mechanism could be explained by in situ homogeneous toughening mechanism rather than phase separation mechanism.
基金Supported by Science and Technology Planning Project of Huizhou City(20161117141959)
文摘[Objectives] This study was conducted to establish an LC-MS/MS method for the determination of three kinds of polyether residues in eggs with QuEChERS dSPE EMR-Lipid as a pretreatment method, which was established according to Agilent Bond Elut enhanced lipid removal EMR-Lipid technology. [ Methods] Egg was extracted by acidified acetonitrile, purified by Bond Elut EMR-Lipid QuEChERS, and detected by HPLC-MS/MS. [ Results] The three kinds of polyether residues had good linear relationships in the range of 2.0 - 100 μg/L with peak areas, r 〉 0. 999. The recoveries ranged from 84.6% to 107.0%. [ Conclusions ] The method is convenient and accurate, and the quantitative results are accurate and reproducible. It is suitable for the determination of the three kinds of polyether residues in eggs.
基金from the Special Fund for the Program for Zhejiang Provincial Natural Science Foundation of China(LZ16C160001)National Key Research and Development Program(2017YFD0601105),the National Natural Science Foundation of China(Grant No.21806142)the Zhejiang Provincial Natural Science Foundation of China(Grant No.LY20B070002).
文摘It is essential to design economic and efficient tougheners to prepare high-performance epoxy resin;however,this has remained a huge challenge.Herein,an eco-friendly,low-cost,and facile-fabricated bio-based hyperbranched toughener,carboxylic acid-functionalized tannic acid(CATA),was successfully prepared and applicated to the preparation of solvent-free epoxy resins.The mechanical performance,morphology,structural characterization,and thermal characterization of toughened epoxy resin system were studied.The toughened epoxy resin system with only 1.0wt%CATA reached the highest impact strength,111%higher than the neat epoxy resin system.Notably,the tensile strength and elongation at break of toughened epoxy resin systems increased moderately with increasing CATA loading.Nonphase-separated hybrids with significant toughening effect were obtained.Additionally,the thermal stabilities of toughened epoxy resin systems decreased with increasing CATA loading.This study provides an eco-friendly,cost-effective,and facile approach for the preparation of high-performance,solvent-free epoxy resins with potential for practical applications in sealing integrated circuits and electrical devices fields.
基金financially supported by the National Natural Science Foundation of China(No.21404112)Ningbo Key Scientific and Technological Project(No.2014B10023)+2 种基金Ningbo Natural Science Foundation(No.2015A610016)Open Project of Key Laboratory of Marine Materials and Related Technologies(No.2016K07)Ningbo Science and Technology Innovation Team(No.2015B11003)
文摘In this work, a series of high performance bio-based polyurethanes（bio-PUs） were synthesized from polylactide（PLA）-based diols, different diisocyanates（TDI, MDI, HDI, IPDI） and chain extender 1,4-butanediol, in which different soft and hard segments are used to adjust their transition temperatures and mechanical properties. Poly（lactide-co-caprolactone）copolymer diols（co-PLAols） instead of PLA diols as the soft segment improved the thermal stability and mechanical properties of the synthesized bio-PUs. Among them, MDI-based bio-PUs have the highest T_g（43.8 °C）, tensile strength（23.5 MPa） and modulus（380.8 MPa）, while HDI-based bio-PUs have the lowest T_g（21.4 °C） and highest elongation at break（580%）. Especially, the bio-PUs synthesized from co-PLAols and MDI demonstrate better mechanical properties,closed to petroleum-based commodities. Furthermore, the obtained bio-PUs display good shape memory properties at body temperature and cytocompatibility. Therefore, these bio-PUs are promising for applications in biomedical fields.
基金the financial support provided by "One Hundred Talented People" of the Chinese Academy of Sciences–China (No. Y60707WR04)Natural Science Foundation of Zhejiang Province (No. Y16B040008)
文摘In this study, monoglycidyl silyl etherated eugenol(GSE) was synthesized as reactive epoxy diluent, and the chemical structure of GSE, intermediates, and products were characterized by Fourier transform infrared spectroscopy(FTIR) and nuclear magnetic resonance(~1 H-NMR). GSE existed as a potential bio-based reactive diluent for petroleum-based epoxy resin. The curing kinetics of EP/HHPA/GSE system was studied by non-isothermal DSC method. The kinetics parameters were calculated by using the Kissinger model, Crane model, Ozawa model, and β-T(temperature-heating rate) extrapolation, respectively. In addition, the effects of GSE on the thermo-mechanical properties and thermal stability of EP/HHPA/GSE systems were studied, indicating that GSE can effectively improve the toughness and thermal decomposition temperature of the epoxy system.
基金the National Key Research and Development Program of China(2017YFC1103900)the National Natural Science Foundation of China(22075244 and 51722306)+1 种基金Natural Science Foundation of Zhejiang Province(LZ22E030001)Shanxi-Zheda Institute of Advanced Materials and Chemical Engi-neering(2021SZ-TD009).
文摘Many natural fibers are lightweight and display remarkable strength and toughness.These properties originate from the fibers’hierarchical structures,assembled from the molecular to macroscopic scale.The natural spinning systems that produce such fibers are highly energy efficient,inspiring researchers to mimic these processes to realize robust artificial spinning.Significant developments have been achieved in recent years toward the preparation of high-performance bio-based fibers.Beyond excellent mechanical properties,bio-based fibers can be functionalized with a series of new features,thus expanding their sophisticated applications in smart textiles,electronic sensors,and biomedical engineering.Here,recent progress in the construction of bio-based fibers is outlined.Various bioinspired spinning methods,strengthening strategies for mechanically strong fibers,and the diverse applications of these fibers are discussed.Moreover,challenges in reproducing the mechanical performance of natural systems and understanding their dynamic spinning process are presented.Finally,a perspective on the development of biological fibers is given.
基金This work was financially supported by the following funds:National Natural Science Foundation of China(51803055)Hunan Provincial Natural Foundation of China(2019JJ50472)+5 种基金Scientific Research Fund of Hunan Provincial Education Department of China(18C0979,19A391)Opening Fund of National&Local Joint Engineering Laboratory for New Petro-chemical Materials and Fine Utilization of Resources(KF201802)Hunan Province Key Field R&D Program Project(2019GK2246)Key Scientific Research Project of Huaihua University(HHUY2019-04)Hunan Provincial Key Research and Development Program(2018GK2062)Science and Technology Plan Project of Huaihua City(2020R3101).
文摘Polyvinyl alcohol (PVA) has been widely used in the fields of medical, food and packaging due to its excellentbiocompatibility, good fiber-forming and film-forming properties. However, the high flammability of PVA hasgreatly limited its wider applications. The flame-retardant PVA was prepared by melt blending of a bio-basedflame retardant (prepared from lignin, phosphoric acid and carbamide) with thermoplastic PVA (TPVA). Thechemical structure, morphology, thermal properties, mechanical properties, fire property and fluidity of thisflame retardant PVA were investigated by Fourier transform infrared spectrometer(FTIR), field emission scanning electron microscope(SEM), thermogravimetric analyzer(TGA), impact tester, universal testing machine,horizontal-vertical burning tester, limiting oxygen indexer(LOI) and melt flow rate meter(MFR). The resultsshowed that the prepared flame retardant had good compatibility with the PVA substrate;The impact strength,melt flow rate, fire property and char residue of this PVA material increased with the content of bio-based flameretardant. When the content of flame retardant was of 20%, the five indices including impact strength, meltflow rate, UL-94 level, LOI and char residual were 11.3 KJ/m^(2), 21.2 g/10 min, V-0 UL-94 level, 33.1%, and19.2%, respectively. This research can promote the high-value utilization of lignin and the application ofPVA in the fields of fire protection.
基金This work was financially supported by the National Natural Science Foundation of China(NO. 204760l5).
文摘Catalytic hydrogenation of SBS was performed for the first time in polyether molten salt with Ru/TPPTS complex as catalyst. Experimental results showed that the hydrogenation degree can be enhanced significantly by the addition of triphenylphosphine (TPP). When the molar ratio of TPP, TPPTS and Ru is 2:5:1, 89% hydrogenation degree can be achieved after 12 h under reaction conditions of 5.0 MPa and 150°C. The ionic liquid containing catalyst can be reused three times without obvious changes in the catalytic selectivity and activity.
基金supported by the National Natural Science Foundation of China (NSFC 21706163)the Liaoning Province Department of Education Foundation (LQGD2017020)
文摘Three new catalysts based on the silica gel supported polyether ionic liquids(ILs), i.e., [HO-PECH-MIM]ClSi, [H2N-PECH-MIM]Cl-Si, and [HOOC-PECH-MIM]Cl-Si, were prepared, and their chemical structures were characterized by infrared(IR) spectroscopy and nuclear magnetic resonance(NMR) spectroscopy. Thermogravimetric analyzer(TG), X-ray diffractometer(XRD) and scanning electron microscope(SEM) were used to evaluate their thermal stability,crystalline structure and apparent morphology, respectively. Surface areas of the prepared catalysts were calculated by the Brunauer-Emmett-Teller(BET) method. The catalytic reaction for the synthesis of propylene carbonate(PC) using CO_2 and propylene oxide(PO) in the presence of the prepared catalysts was studied. The influences of times of recycling and catalyst structure on catalytic performance were also investigated. The experimental results showed that the silica gel supported polyether ILs catalysts successfully prepared under mild condition could possess the advantages of high activity, excellent thermal stability, good selectivity and easy recycling, while the phase transition of the liquid polyether ILs catalysts was also achieved. When the reaction temperature was 90 °C, the CO_2 pressure was 2.0 MPa and the dosage of the catalyst was 2.5%, [HOOC-PECH-MIM]Cl-Si was found to have the best catalytic performance in the catalytic process, with the conversion rate reaching 100% and the selectivity equating to 98.2%. The conversion rate and selectivity still could reach more than 90% even after the catalyst was reused for 15 times.
基金National Key R&D Program of China(No.2021YFE0105100)Fok Ying-Tung Education Foundation,China(No.171065)Shanghai Rising-Star Program,China(No.20QA1400500)。
文摘Elastic bio-based waterproof and breathable membranes(EBWBMs) allow the passage of water vapor effectively and resist the penetration of liquid water,making it ideal for use under extreme conditions.In this study,we used a facile strategy to design the bio-based polyurethane(PU) nanofibrous membranes with the nanoscale porous structure to provide the membranes with high waterproof and breathable performances.The optimization of nanofibrous membrane formation was accomplished by controlling the relative ambient humidity to modulate the cooperating effects of charge dissipation and non-solvent-induced phase separation.The obtained EBWBMs showed multiple functional properties,with a hydrostatic pressure of 86.41 kPa and a water vapor transmission(WVT) rate of 10.1 kg·m^(-2)·d^(-1).After 1 000 cycles of stretching at 40% strain,the EBWBMs retained over 59% of the original maximum stress and exhibited an ideal elasticity recovery ratio of 85%.Besides,even after 80% deformation,the EBWBMs still maintained a hydrostatic pressure of 30.65 kPa and a WVT rate of 13.6 kg·m^(-2)·d^(-1),suggesting that bio-based PU nanofibrous membranes could be used for protection under extreme conditions.
