Plasticizers are essential to reduce processing difficulties and improve plastic properties.However,petroleumbased phthalate plasticizers,which are mostly used at present,urgently require alternatives due to their con...Plasticizers are essential to reduce processing difficulties and improve plastic properties.However,petroleumbased phthalate plasticizers,which are mostly used at present,urgently require alternatives due to their con-firmed and serious health risks.In this study,the green mass production of trans-aconitic acid was achieved via synthetic biotechnology and microbial fermentation,which was further expanded to multiple application sce-narios using chemical esterification,resulting in trans-aconitate plasticizers that are biosafe and environmentally friendly and have high plasticizing efficiency and long-term stability.Different plasticizers with various core structures and alkyl chains were studied to determine their properties as polyvinyl chloride(PVC)plasticizers,and tributyl trans-aconitate displayed the best comprehensive performance with up to 1.24 plasticizing effi-ciency.The possible PVC plasticization mechanism with synergistic solvent,support,and shielding effects was discussed and summarized.Tributyl trans-aconitate has significant potential to replace traditional PVC plasti-cizers in general merchandise,food packaging,medicinal materials,and other products,further promoting the development of the high-quality plastic industry with greener technology and safer applications.展开更多
Epoxy resins are widely employed in wind turbine blades,drone rotors,and automotive interiors due to their excel-lent mechani-cal proper-ties and long service life.However,their insoluble and infusible cross-linked ne...Epoxy resins are widely employed in wind turbine blades,drone rotors,and automotive interiors due to their excel-lent mechani-cal proper-ties and long service life.However,their insoluble and infusible cross-linked networks pose a significant re-cycling challenge,particularly with the impending retirement of the first generation of wind turbine blades.In this work,we reported a fully bio-based epoxy Vitrimer(FEP)incorporat-ing a dual-dynamic covalent network design and systematically investigated the influence of the 1,5,7-triazabicyclo[4.4.0]dec-5-ene(TBD)catalyst on its curing kinetics,thermal/mechan-ical properties,dynamic exchange behavior,and degradation performance in a mild alkaline solution.Compared to conventional epoxy resins,FEP exhibited superior tensile strength and elongation at break at an optimal TBD concentration(2 wt%),achieving an excellent strength-toughness balance.The presence of TBD accelerated the exchange rates of both disulfide and ester bonds,endowing FEP with notable stress relaxation at elevated tempera-tures.Moreover,FEP demonstrated complete dissolution in 1 mol/L NaOH within 6 h at 25℃.These results underscored the exceptional strength,toughness,and recyclability of FEP,positioning it as a promising,environmentally friendly matrix resin for next-generation appli-cations in the new energy sector.展开更多
Developing green and efficient methods to acquire lignocellulose-based chemicals with high added value is beneficial for facilitating green chemistry and sustainable development.The goal of this study is to demonstrat...Developing green and efficient methods to acquire lignocellulose-based chemicals with high added value is beneficial for facilitating green chemistry and sustainable development.The goal of this study is to demonstrate that bio-based benzaldehyde,a noteworthy high-value chemical,is able to be directionally prepared from lignocellulosic biomass.This new control-lable transformation was materialized by uniting catalytic-pyrolysis of lignocellulose to toluene intermediate and catalytic oxidation of toluene intermediate to bio-based benzalde-hyde.This work also developed a highly active magnetic catalyst(CoFe_(2)O_(4)@Biochar(HTR)),achieving 77.1%benzaldehyde selectivity and 46.7%benzaldehyde yield using this catalyst.It was found that introducing the biochar carrier into the cobalt iron composite metal oxide cat-alyst enhanced hydroxyl radical formation and bio-based benzaldehyde synthesis.Based on catalyst characterizations and hydroxyl radical analysis,potential reaction mechanism for bio-based benzaldehyde synthesis was proposed.This strategy may provide a beneficial pathway for developing high-value bio-based chemical(benzaldehyde)using renewable lignocellulosic biomass.展开更多
With the escalating global emphasis on environmental conservation and sustainable development,enhancing the service quality and durability of road surfaces and facilitating the green development of highways have comma...With the escalating global emphasis on environmental conservation and sustainable development,enhancing the service quality and durability of road surfaces and facilitating the green development of highways have commanded considerable attention.Bio-based polyurethane,on account of its remarkable physical and chemical properties,green,sustainable and renewable capacity,as well as its structural design capabilities,has drawn widespread attention and numerous studies have been carried out.It has gradually started to substitute traditional petroleum-based polyurethane materials in road engineering.Nevertheless,the application of bio-based polyurethane materials in road engineering remains in the exploratory phase.To stimulate the application research of bio-based polyurethane materials in road engineering and offer additional research directions,this paper reviews the research advancements of bio-based polyurethane materials and their applications in road engineering.The fundamental classification of bio-based polyurethane is introduced.The characteristics and challenges associated with various preparation methods for bio-based polyurethane are described.The influence of bio-based polyurethane on road engineering materials are analyzed.The evaluation indicators of bio-based polyurethane within the life cycle of road engineering are investigated.Finally,the development tendency towards in road engineering applications are forecasted.This paper provides a reference for the study of bio-based polyurethane materials in road engineering applications.展开更多
The current global shortage of oil resources and the pollution problems caused by traditional barrier materials urgently require the search for new substitutes.Biodegradable bio-based barrier materials possess the cha...The current global shortage of oil resources and the pollution problems caused by traditional barrier materials urgently require the search for new substitutes.Biodegradable bio-based barrier materials possess the characteristics of being renewable,environmentally friendly,and having excellent barrier properties.They have become an important choice in fields such as food packaging,agricultural film covering,and medical protection.This review systematically analyzes the design and research of this type of material,classifying biobased and biodegradable barrier materials based on the sources of raw materials and synthesis pathways.It also provides a detailed introduction to the latest research progress of biobased and biodegradable barrier materials,discussing the synthesis methods and improvement measures of their barrier properties.Subsequently,it analyzes the related technologies for enhancing the barrier properties of biobased and biodegradable barrier materials,and finally looks forward to the directions that future research should focus on,promoting the transition of biobased and biodegradable barrier materials from the laboratory to industrial applications.展开更多
The demand for energy-efficient and environmental-friendly power grid construction has made the exploitation of bio-based electrical epoxy resins with excellent properties increasingly important.This work developed th...The demand for energy-efficient and environmental-friendly power grid construction has made the exploitation of bio-based electrical epoxy resins with excellent properties increasingly important.This work developed the bio-based electrotechnical epoxy resins based on magnolol.High-performance epoxy resin(DGEMT)with a double crosslinked points and its composites(Al_(2)O_(3)/DGEMT)were obtained taking advantages of the two bifunctional groups(allyl and phenolic hydroxyl groups)of magnolol.Benefitting from the distinctive structure of DGEMT,the Al_(2)O_(3)/DGEMT composites exhibited the advantages of intrinsically high thermal conductivity,high insulation,and low dielectric loss.The AC breakdown strength and thermal conductivity of Al_(2)O_(3)/DGEMT composites were 35.5 kV/mm and 1.19 W·m-1·K-1,respectively,which were 15.6%and 52.6%higher than those of petroleum-based composites(Al_(2)O_(3)/DGEBA).And its dielectric loss tanδ=0.0046 was 20.7%lower than that of Al_(2)O_(3)/DGEBA.Furthermore,the mechanical,thermal and processing properties of Al_(2)O_(3)/DGEMT are fully comparable to those of Al_(2)O_(3)/DGEBA.This work confirms the feasibility of manufacturing environmentally friendly power equipment using bio-based epoxy resins,which has excellent engineering applications.展开更多
By investigating the performance characteristics of the bio-based surfactant 8901A,a composite decontamination and injection system was developed using 8901A as the primary agent,tailored for application in low-permea...By investigating the performance characteristics of the bio-based surfactant 8901A,a composite decontamination and injection system was developed using 8901A as the primary agent,tailored for application in low-permeability and heavy oil reservoirs under varying temperature conditions.The results demonstrate that this system effectively reduces oil–water interfacial tension,achieving an ultra-low interfacial tension state.The static oil washing efficiency of oil sands exceeds 85%,the average pressure reduction rate reaches 21.55%,and the oil recovery rate improves by 13.54%.These enhancements significantly increase the system’s ability to dissolve oilbased blockages,thereby lowering water injection pressure caused by organic fouling,increasing the injection volume of injection wells,and ultimately improving oil recovery efficiency.展开更多
Aging plays a critical role in determining the durability and long-term performance of asphalt pavements,as it is influenced by both external factors(e.g.,temperature,ultraviolet(UV)radiation,moisture,oxidative gases)...Aging plays a critical role in determining the durability and long-term performance of asphalt pavements,as it is influenced by both external factors(e.g.,temperature,ultraviolet(UV)radiation,moisture,oxidative gases)and internal factors such as binder composition.Although laboratory simulations of aging are well established for conventional bituminous binders,limited attention has been paid to replicating and evaluating aging processes in bio-based binders.This review provides a comprehensive analysis of current laboratory techniques for simulating and assessing binder aging,with a focus on two key areas:aging simulation protocols and evaluation methodologies.The analysis shows that although several efforts have been made to incorporate external aging factors into lab simulations,significant challenges persist,especially in the case of bio-based binders,which are characterized by a high variability in composition and limited understanding of their aging behavior.Current evaluation approaches also exhibit limitations.Improvements are needed in the molecular-level analysis of oxidation(e.g.,through more representative oxidation modelsin molecular dynamicssimulations),in the separation and quantification of binder constituents,and in the application of advanced techniques such as fluorescence microscopy to better characterize polymer dispersion.To enhance the reliability of laboratory simulations,future research should aim to improve the correlation between laboratory and field aging,define robust aging indexes,and refine characterization methods.These advancements are particularly critical for bio-based binders,whose performance is highly sensitive to aging and for which standard test protocols are still underdeveloped.A deeper understanding of aging mechanisms in both polymer-modified and biobased binders,along with improved analytical tools for assessing oxidative degradation and morphological changes,will be essential to support the development of sustainable,high-performance paving materials.展开更多
In the context of transitioning toward more sustainable construction materials,this study explores the impact of incorporating millet husks as an alternative to sand on the physical,mechanical,and thermal performance ...In the context of transitioning toward more sustainable construction materials,this study explores the impact of incorporating millet husks as an alternative to sand on the physical,mechanical,and thermal performance of lightweight concrete.Through a mixture design approach,five formulations were selected and thoroughly characterized.The analysis of iso-response curves enabled an in-depth assessment of the cross-effects between formulation parameters and their interactions on the final properties of the material.The results show that integrating millet husks leads to a significant reduction in density,reaching up to 21%,while maintaining notable mechanical performance.A balanced formulation of sand and fibers achieved a maximum compressive strength of 12.11 MPa,demonstrating that,under specific conditions,plant fibers actively contribute to the structural integrity of the composite.In tensile strength,the positive influence of fibers is even more pronounced,with a maximum resistance of 8.62 MPa,highlighting their role in enhancing material cohesion.From a thermal perspective,millet husks reduce both thermal conductivity and effusivity,thereby limiting heat transfer and accumulation within the composite.Iso-response curve analysis reveals that these effects are directly linked to the proportions of the constituents and that achieving an optimal balance between sand,fibers,and cement is key to maximizing performance.These findings demonstrate that the adopted approach allows moving beyond conventional substitution methods by identifying optimal configurations for the design of lightweight bio-based concretes that are both strong and insulating,thereby confirming the potential of millet husks in developing lightweight concretes suitable for sustainable construction applications.展开更多
An efficient and novel approach is proposed for oxidative arylation of bio-based furfuryl alcohol(FA)to aryl furans(AFs),a versatile monomer of photoelectric materials,in the presence of UiO-67-Pd(F)with phenanthrolin...An efficient and novel approach is proposed for oxidative arylation of bio-based furfuryl alcohol(FA)to aryl furans(AFs),a versatile monomer of photoelectric materials,in the presence of UiO-67-Pd(F)with phenanthroline/bipyridine,and poly-F substituted phenyl ligands as the mixture linkers.The results of control experiments and theoretical calculations reveal that the–F on the phenyl linkers efficiently tunes the electron-deficient nature of Pd through the Zr_(6) clusters bridges,which favors the adsorption and activation of the furan ring.Furthermore,the conjugation of different nitrogen-containing ligands facilitates Pd coordination for the Heck-type insertion and subsequent electrophilic palladation,respectively.As a result,the oxidative arylation of FA derivatives is substantially enhanced because of these electronic and steric synergistic effects.Under the optimized conditions,72.2%FA conversion and 74.8%mono aryl furan(MAF)selectivity are shown in the Heck-type insertion.Meanwhile,85.3%of MAF is converted,affording 74.8%selectivity of final product(AFs)in the subsequent electrophilic palladation reaction.This process efficiency is remarkably higher than that with homogeneous catalysts.In addition,furan-benzene polymer obtained from the halogen-free synthesis catalyzed by UiO-67-Pd(F)show significantly better properties than that from conventional Suzuki coupling method.Therefore,the present work provides a new insight for useful AFs synthesis by oxidative arylation of bio-furan via rational tunning the metal center micro-environment of heterogeneous catalyst.展开更多
In this study,3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate(ECC)and refined Camellia oleifera seed oil(RCOSO)obtained from saponification and acidified hydrolysis has been used as raw materials to perform ...In this study,3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate(ECC)and refined Camellia oleifera seed oil(RCOSO)obtained from saponification and acidified hydrolysis has been used as raw materials to perform ring-opening reactions for the preparation of cyclohexyl acrylate derivative(CAR).The structure of the synthesized product was characterized using infrared spectroscopy,Raman spectroscopy,and nuclear magnetic resonance spectroscopy.CAR was employed as a plasticizer to produce modified polyvinyl chloride(PVC)films,dioctyl phthalate plasticizer(DOP)used in reference samples to investigate the influence of different plasticizer molecular structures on the properties of PVC films.Observation suggested that(1)CAR plasticizer was successfully synthesized;(2)CAR can interact with PVC,exhibiting good compatibility;(3)PVC films contain CAR showed improved thermal stability,hydrophilicity,and tensile strength.Therefore,CAR has the potential to replace DOP as a plasticizer for PVC.展开更多
The strength and damping properties of Co-Ni-Cr-Mo-based alloys with 0.5wt%Nb addition after various plastic deformation and heat treatment processes were investigated.Through Vickers hardness tests,free resonance You...The strength and damping properties of Co-Ni-Cr-Mo-based alloys with 0.5wt%Nb addition after various plastic deformation and heat treatment processes were investigated.Through Vickers hardness tests,free resonance Young's modulus measurements,and microstructure analysis,the effects of dislocation density,vacancy formation,and recrystallization on the alloy performance were clarified.Results indicate that increasing the rolling reduction enhances damping property due to higher dislocation density,whereas aging below the recrystallization temperature reduces damping property via dislocation pinning by the Suzuki effect.Recrystallization heat treatment restores the original structure and damping level.This alloy possesses tensile strength of approximately 1500 MPa and logarithmic decrement valueδ^(-1) in the range of 2×10^(-4)–3×10^(-4),demonstrating superior mechanical properties compared with the Ti-based alloys,which makes it an excellent candidate material for ultrasonic tools and medical applications.展开更多
Nonlinear static procedures are widely adopted in structural engineering practice for seismic performance assessment due to their simplicity and computational efficiency.However,their reliability depends heavily on ho...Nonlinear static procedures are widely adopted in structural engineering practice for seismic performance assessment due to their simplicity and computational efficiency.However,their reliability depends heavily on how the nonlinear behaviour of structural components is represented.The recent earthquakes in Albania(2019)and Türkiye(2023)have underscored the need for accurate assessment techniques,particularly for older reinforced concrete buildings with poor detailing.This study quantifies the discrepancies between default and user-defined component modelling in pushover analysis of pre-modern reinforced concrete structures,analysing two representative low-and mid-rise reinforced concrete frame buildings.The lumped plasticity approach incorporates moment-rotation relationships derived from actual member properties and reinforcement configurations,while the distributed plasticity approach uses software-generated default properties based on modern codes.Results show that the distributed plasticity models systematically overestimate both the strength and the deformation capacity by up to 35%compared to lumped plasticity models,especially in buildings with poor detailing and low concrete strength.These findings demonstrate that default software procedures,widely used in practice but not validated for pre-modern structures,produce dangerously unconservative seismic performance estimates.The study provides quantitative evidence of the critical need for tailored modelling strategies that reflect the actual conditions of the existing building stock.展开更多
Neuronal plasticity,the brain's ability to adapt structurally and functionally,is essential for learning,memory,and recovery from injuries.In neurodegenerative diseases such as Alzheimer's disease and Parkinso...Neuronal plasticity,the brain's ability to adapt structurally and functionally,is essential for learning,memory,and recovery from injuries.In neurodegenerative diseases such as Alzheimer's disease and Parkinson's disease,this plasticity is disrupted,leading to cognitive and motor deficits.This review explores the mechanisms of neuronal plasticity and its effect on Alzheimer's disease and Parkinson's disease.Alzheimer's disease features amyloid-beta plaques and tau tangles that impair synaptic function,while Parkinson's disease involves the loss of dopaminergic neurons affecting motor control.Enhancing neuronal plasticity offers therapeutic potential for these diseases.A systematic literature review was conducted using databases such as PubMed,Scopus,and Google Scholar,focusing on studies of neuronal plasticity in Alzheimer's disease and Parkinson's disease.Data synthesis identified key themes such as synaptic mechanisms,neurogenesis,and therapeutic strategies,linking molecular insights to clinical applications.Results highlight that targeting synaptic plasticity mechanisms,such as long-term potentiation and long-term depression,shows promise.Neurotrophic factors,advanced imaging techniques,and molecular tools(e.g.,clustered regularly interspaced short palindromic repeats and optogenetics)are crucial in understanding and enhancing plasticity.Current therapies,including dopamine replacement,deep brain stimulation,and lifestyle interventions,demonstrate the potential to alleviate symptoms and improve outcomes.In conclusion,enhancing neuronal plasticity through targeted therapies holds significant promise for treating neurodegenerative diseases.Future research should integrate multidisciplinary approaches to fully harness the therapeutic potential of neuronal plasticity in Alzheimer's disease and Parkinson's disease.展开更多
Photoreforming poly(lactic acid)(PLA)plastics into pyruvic acid(PA)coupled with hydrogen evolution is of great significance for sustainable development.However,a significant challenge lies inα-OH bond cleaving of lac...Photoreforming poly(lactic acid)(PLA)plastics into pyruvic acid(PA)coupled with hydrogen evolution is of great significance for sustainable development.However,a significant challenge lies inα-OH bond cleaving of lactic acid(LA).Herein,CdS/Bi_(4)Ti_(3)O_(12)composite is fabricated,bridged by Bi−S bonds,through in-situ growth of CdS nanoparticles on Bi_(4)Ti_(3)O_(12)nanoflowers for the successive removal of hydrogen fromα-C in LA.In-situ X-ray photoelectron spectroscopy confirms the S-scheme carriers transfer route and interfacial Bi−S bond in CdS/Bi_(4)Ti_(3)O_(12).Consequently,the photo-electrons and holes with extended lifetimes and strong redox potential accumulate in the CdS conduction band and Bi_(4)Ti_(3)O_(12)valence band,respectively,as evidenced by in-situ electron spin resonance and time-resolved photoluminescence.This facilitates the generation of·OH radicals,which further participate in the successive dehydrogenation reaction of LA.Consequently,the photoreforming efficiencies of converting PLA into PA and H_(2)by CdS/Bi_(4)Ti_(3)O_(12)are 1.7 and 3.16 mmol g^(-1)h^(-1),which are respectively 2.8 and 22 times higher than that by pristine Bi_(4)Ti_(3)O_(12).The present work provides a new approach for designing S-scheme to achieve hydrogen production and value-added conversion of plastics.展开更多
Sleep is a fundamental biological process essential for maintaining brain function,cognitive performance,and overall health.Despite over a century of research,the mechanisms underlying sleep homeostasis-the process by...Sleep is a fundamental biological process essential for maintaining brain function,cognitive performance,and overall health.Despite over a century of research,the mechanisms underlying sleep homeostasis-the process by which the need for sleep accumulates during wakefulness and dissipates during sleep-remain incompletely understood.This article explores the latest advancements in sleep research,focusing on the role of synaptic plasticity in sleep homeostasis,as illuminated by Sawada et al.(2024).展开更多
The dentate gyrus of the hippocampus is a plastic structure that displays modifications at different levels in response to positive stimuli as well as to negative conditions such as brain damage.The latter involves gl...The dentate gyrus of the hippocampus is a plastic structure that displays modifications at different levels in response to positive stimuli as well as to negative conditions such as brain damage.The latter involves global alterations,making understanding plastic responses triggered by local damage difficult.One key feature of the dentate gyrus is that it contains a well-defined neurogenic niche,the subgranular zone,and beyond neurogenesis,newly born granule cells may maintain a“young”phenotype throughout life,adding to the plastic nature of the structure.Here,we present a novel experimental model of local brain damage in organotypic entorhino-hippocampal cultures that results in the activation of adjacent newly born granule cells.A small piece of filter paper was placed on the surface of the granule cell layer of the dentate gyrus,which evoked a foreign body reaction of astrocytes,along with the activation of local young neurons expressing doublecortin.Forty-eight hours after foreign body placement,the number of doublecortin-immunoreactive cells increased in the subgranular zone in the direct vicinity of the foreign body,whereas overall increased doublecortin immunoreactivity was observed in the granule cell layer and molecular layer of the dentate gyrus.Foreign body placement in the pyramidal layer of the CA1 region evoked a comparable local astroglial reaction but did not lead to an increase in doublecortin-immunoreactive in either the CA1 region or the adjacent dentate gyrus.Seven days after foreign body placement in the dentate gyrus,the increase in doublecortin-immunoreactivity was no longer observed,indicating the transient activation of young cells.However,7 days after foreign body placement,the number of doublecortin-immunoreactive granule cells coimmunoreactive for calbindin was lower than that under the control conditions.As calbindin is a marker for mature granule cells,this result suggests that activated young cells remain at a more immature stage following foreign body placement.Live imaging of retrovirally green fluorescent protein-labeled newly born granule cells revealed the orientation and growth of their dendrites toward the foreign body placement.This novel experimental model of foreign body placement in organotypic entorhino-hippocampal cultures could serve as a valuable tool for studying both glial reactivity and neuronal plasticity,specifically of newly born neurons under controlled in vitro conditions.展开更多
This study examines the literature on bio-based and biodegradable plastics published between 2000 and 2021 and provides insights and research suggestions for the future.The study gathers data from the Scopus and ISI W...This study examines the literature on bio-based and biodegradable plastics published between 2000 and 2021 and provides insights and research suggestions for the future.The study gathers data from the Scopus and ISI Web of Science databases,then picks 1042 publications objectively and analyses their metadata.Furthermore,144 papers from the Web of Science are analysed to present insights and classifications of the literature based on content analyses,including assessment/evaluation of the sustainability of bio-based and biodegradable Plastics,sustainability of biodegradable Plastics,and factors driving the uptake of biodegradable plastics.The study finds that most research on bio-based and biodegradable plastic film evaluations considered only one dimension of sustainability,few considered two dimensions,and very few considered three dimensions.Though,in recent years,academic and industrial interest has grown dramatically in biodegradable plastics towards sustainability.The triple bottom line method in this report(economic benefit,social responsibility,and environmental protection)was employed to assess the biodegradable plastics towards sustainability.Top journals,Influential authors,top contributing institutions,top contributing nations,and contributions by fields are all identified in this study.This research gives a detailed but straightforward theoretical design of bio-based and biodegradable polymers.The study’s results and future research initiatives provide a new path for further investigation and contribution to the field.展开更多
Bending is a crucial operation in the sheet forming of Mg alloys for automotive and aerospace applications.In this work,three kinds of sheets from an AZ31 rolled plate,sheared at 0°(S0),45°(S45),and 90°...Bending is a crucial operation in the sheet forming of Mg alloys for automotive and aerospace applications.In this work,three kinds of sheets from an AZ31 rolled plate,sheared at 0°(S0),45°(S45),and 90°(S90)to the rolling direction,were subjected to three-point bending tests.In-situ digital image correlation(DIC)system was employed to capture the strain fields.Electron backscatter diffraction(EBSD)was used to examine the through-thickness microstructures.A crystal plasticity finite element method(CPFEM)incorporating twinning and slip mechanisms was developed to simulate the bending deformation.The texture effect on the neutral layer shift and twinning behaviors was systematically investigated in terms of both experiments and simulations.The results show that CPFEM effectively simulated the texturedependent shifting behaviors of neutral layer and the associated twinning behaviors.Particularly,the spatial distributions of neutral layer across the entire bent plates were captured by both DIC and CPFEM.Additionally,some unusual twinning behaviors were analyzed in depth,such as the{10-12}-{10-12}secondary twins in S90,localized twin bands in S0,and the twin traces difference in S45.These findings reveal a close relationship between the neutral layer shift and twinning activity induced by the initial texture and strain levels.This work provides valuable insights into the bending deformation mechanisms of Mg alloys and has important implications for improving their formability and controlling springback.展开更多
Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimen...Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimensional optimization strategy to alleviate the side reactions between SN and Li metal,and develop a highly stable poly-vinylethylene carbonate-based PPCE(PPCE-VEC).Moreover,we identify the intrinsic factors of multi-dimensional polymer structures on the electrolyte stability by three typical classes of polyesters.The PPCE-VEC constructed by in situ polymerization exhibits much better stability than poly-vinylene carbonate-based PPCE(PPCE-VCA)and poly-trifluoroethyl acrylate-based PPCE(PPCE-TFA),which is verified by its fewer SN-decomposition species in X-ray photoelectron spectroscopy(XPS)and outstanding full cell performance.The PPCE-VEC-enabled LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)full cell achieve 73.7%capacity retention after 1400 cycles,which outperforms PPCE-VCA-and PPCE-TFA-enabled full cells(61.9%and 46.9%).Spectral analysis and theoretical calculation reveal that the high solvation ability of the carbonyl site,flexible polymer chain,and homogeneous electrolyte phase of PPCE-VEC are favorable to maximizing competition coordination with Li^(+)to weaken the Li^(+)–SN binding and shape an anion-rich solvation structure.This optimized polymer-involved Li^(+)solvation enhances SN stability and facilitates the formation of B/F enriched solid-electrolyte interphase(SEI),thus significantly improving PPCE stability.展开更多
基金National Key R&D Program of China(Grant No.2022YFF1501300)the“Transformational Technologies for Clean Energy and Demonstration”,Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA 21000000).X.Lu,Q.Wang and X.Huang are supported by the Shandong Taishan Scholarship.
文摘Plasticizers are essential to reduce processing difficulties and improve plastic properties.However,petroleumbased phthalate plasticizers,which are mostly used at present,urgently require alternatives due to their con-firmed and serious health risks.In this study,the green mass production of trans-aconitic acid was achieved via synthetic biotechnology and microbial fermentation,which was further expanded to multiple application sce-narios using chemical esterification,resulting in trans-aconitate plasticizers that are biosafe and environmentally friendly and have high plasticizing efficiency and long-term stability.Different plasticizers with various core structures and alkyl chains were studied to determine their properties as polyvinyl chloride(PVC)plasticizers,and tributyl trans-aconitate displayed the best comprehensive performance with up to 1.24 plasticizing effi-ciency.The possible PVC plasticization mechanism with synergistic solvent,support,and shielding effects was discussed and summarized.Tributyl trans-aconitate has significant potential to replace traditional PVC plasti-cizers in general merchandise,food packaging,medicinal materials,and other products,further promoting the development of the high-quality plastic industry with greener technology and safer applications.
基金support from the National Natural Science Foundation of China(Nos.22293011,T2341001)the Major Science and Technology Project of Anhui Province(202203a06020010).
文摘Epoxy resins are widely employed in wind turbine blades,drone rotors,and automotive interiors due to their excel-lent mechani-cal proper-ties and long service life.However,their insoluble and infusible cross-linked networks pose a significant re-cycling challenge,particularly with the impending retirement of the first generation of wind turbine blades.In this work,we reported a fully bio-based epoxy Vitrimer(FEP)incorporat-ing a dual-dynamic covalent network design and systematically investigated the influence of the 1,5,7-triazabicyclo[4.4.0]dec-5-ene(TBD)catalyst on its curing kinetics,thermal/mechan-ical properties,dynamic exchange behavior,and degradation performance in a mild alkaline solution.Compared to conventional epoxy resins,FEP exhibited superior tensile strength and elongation at break at an optimal TBD concentration(2 wt%),achieving an excellent strength-toughness balance.The presence of TBD accelerated the exchange rates of both disulfide and ester bonds,endowing FEP with notable stress relaxation at elevated tempera-tures.Moreover,FEP demonstrated complete dissolution in 1 mol/L NaOH within 6 h at 25℃.These results underscored the exceptional strength,toughness,and recyclability of FEP,positioning it as a promising,environmentally friendly matrix resin for next-generation appli-cations in the new energy sector.
基金supported by the National Natural Sci-ence Foundation of China(Nos.U21A20288 and 21978280).
文摘Developing green and efficient methods to acquire lignocellulose-based chemicals with high added value is beneficial for facilitating green chemistry and sustainable development.The goal of this study is to demonstrate that bio-based benzaldehyde,a noteworthy high-value chemical,is able to be directionally prepared from lignocellulosic biomass.This new control-lable transformation was materialized by uniting catalytic-pyrolysis of lignocellulose to toluene intermediate and catalytic oxidation of toluene intermediate to bio-based benzalde-hyde.This work also developed a highly active magnetic catalyst(CoFe_(2)O_(4)@Biochar(HTR)),achieving 77.1%benzaldehyde selectivity and 46.7%benzaldehyde yield using this catalyst.It was found that introducing the biochar carrier into the cobalt iron composite metal oxide cat-alyst enhanced hydroxyl radical formation and bio-based benzaldehyde synthesis.Based on catalyst characterizations and hydroxyl radical analysis,potential reaction mechanism for bio-based benzaldehyde synthesis was proposed.This strategy may provide a beneficial pathway for developing high-value bio-based chemical(benzaldehyde)using renewable lignocellulosic biomass.
基金supported by the Key R&D Project in Shaanxi Province(No.2024GX-YBXM-371)Shaanxi Qinchuangyuan Scientists+Engineers Team Construction Project(2025QCY-KXJ-141).
文摘With the escalating global emphasis on environmental conservation and sustainable development,enhancing the service quality and durability of road surfaces and facilitating the green development of highways have commanded considerable attention.Bio-based polyurethane,on account of its remarkable physical and chemical properties,green,sustainable and renewable capacity,as well as its structural design capabilities,has drawn widespread attention and numerous studies have been carried out.It has gradually started to substitute traditional petroleum-based polyurethane materials in road engineering.Nevertheless,the application of bio-based polyurethane materials in road engineering remains in the exploratory phase.To stimulate the application research of bio-based polyurethane materials in road engineering and offer additional research directions,this paper reviews the research advancements of bio-based polyurethane materials and their applications in road engineering.The fundamental classification of bio-based polyurethane is introduced.The characteristics and challenges associated with various preparation methods for bio-based polyurethane are described.The influence of bio-based polyurethane on road engineering materials are analyzed.The evaluation indicators of bio-based polyurethane within the life cycle of road engineering are investigated.Finally,the development tendency towards in road engineering applications are forecasted.This paper provides a reference for the study of bio-based polyurethane materials in road engineering applications.
基金supported by the Science and Technology Research Project of Henan Province(222102230031)Key Scientific Research Projects of Colleges and Universities in Henan Province(23A430018)Natural Science Foundation of Henan(252300420267).
文摘The current global shortage of oil resources and the pollution problems caused by traditional barrier materials urgently require the search for new substitutes.Biodegradable bio-based barrier materials possess the characteristics of being renewable,environmentally friendly,and having excellent barrier properties.They have become an important choice in fields such as food packaging,agricultural film covering,and medical protection.This review systematically analyzes the design and research of this type of material,classifying biobased and biodegradable barrier materials based on the sources of raw materials and synthesis pathways.It also provides a detailed introduction to the latest research progress of biobased and biodegradable barrier materials,discussing the synthesis methods and improvement measures of their barrier properties.Subsequently,it analyzes the related technologies for enhancing the barrier properties of biobased and biodegradable barrier materials,and finally looks forward to the directions that future research should focus on,promoting the transition of biobased and biodegradable barrier materials from the laboratory to industrial applications.
基金supported by the China Postdoctoral Science Foundation(No.2023M743622)Natural Science Foundation of Ningbo City(No.2024J109)+2 种基金National Natural Science Foundation of China(Nos.E52307038 and U23A20589)Ningbo 2025 Key Scientific Research Programs(Nos.2022Z111,2022Z160 and 2022Z198)the Leading Innovativeand Entrepreneur Team Introduction Program of Zhejiang(No.2021R01005).
文摘The demand for energy-efficient and environmental-friendly power grid construction has made the exploitation of bio-based electrical epoxy resins with excellent properties increasingly important.This work developed the bio-based electrotechnical epoxy resins based on magnolol.High-performance epoxy resin(DGEMT)with a double crosslinked points and its composites(Al_(2)O_(3)/DGEMT)were obtained taking advantages of the two bifunctional groups(allyl and phenolic hydroxyl groups)of magnolol.Benefitting from the distinctive structure of DGEMT,the Al_(2)O_(3)/DGEMT composites exhibited the advantages of intrinsically high thermal conductivity,high insulation,and low dielectric loss.The AC breakdown strength and thermal conductivity of Al_(2)O_(3)/DGEMT composites were 35.5 kV/mm and 1.19 W·m-1·K-1,respectively,which were 15.6%and 52.6%higher than those of petroleum-based composites(Al_(2)O_(3)/DGEBA).And its dielectric loss tanδ=0.0046 was 20.7%lower than that of Al_(2)O_(3)/DGEBA.Furthermore,the mechanical,thermal and processing properties of Al_(2)O_(3)/DGEMT are fully comparable to those of Al_(2)O_(3)/DGEBA.This work confirms the feasibility of manufacturing environmentally friendly power equipment using bio-based epoxy resins,which has excellent engineering applications.
文摘By investigating the performance characteristics of the bio-based surfactant 8901A,a composite decontamination and injection system was developed using 8901A as the primary agent,tailored for application in low-permeability and heavy oil reservoirs under varying temperature conditions.The results demonstrate that this system effectively reduces oil–water interfacial tension,achieving an ultra-low interfacial tension state.The static oil washing efficiency of oil sands exceeds 85%,the average pressure reduction rate reaches 21.55%,and the oil recovery rate improves by 13.54%.These enhancements significantly increase the system’s ability to dissolve oilbased blockages,thereby lowering water injection pressure caused by organic fouling,increasing the injection volume of injection wells,and ultimately improving oil recovery efficiency.
文摘Aging plays a critical role in determining the durability and long-term performance of asphalt pavements,as it is influenced by both external factors(e.g.,temperature,ultraviolet(UV)radiation,moisture,oxidative gases)and internal factors such as binder composition.Although laboratory simulations of aging are well established for conventional bituminous binders,limited attention has been paid to replicating and evaluating aging processes in bio-based binders.This review provides a comprehensive analysis of current laboratory techniques for simulating and assessing binder aging,with a focus on two key areas:aging simulation protocols and evaluation methodologies.The analysis shows that although several efforts have been made to incorporate external aging factors into lab simulations,significant challenges persist,especially in the case of bio-based binders,which are characterized by a high variability in composition and limited understanding of their aging behavior.Current evaluation approaches also exhibit limitations.Improvements are needed in the molecular-level analysis of oxidation(e.g.,through more representative oxidation modelsin molecular dynamicssimulations),in the separation and quantification of binder constituents,and in the application of advanced techniques such as fluorescence microscopy to better characterize polymer dispersion.To enhance the reliability of laboratory simulations,future research should aim to improve the correlation between laboratory and field aging,define robust aging indexes,and refine characterization methods.These advancements are particularly critical for bio-based binders,whose performance is highly sensitive to aging and for which standard test protocols are still underdeveloped.A deeper understanding of aging mechanisms in both polymer-modified and biobased binders,along with improved analytical tools for assessing oxidative degradation and morphological changes,will be essential to support the development of sustainable,high-performance paving materials.
文摘In the context of transitioning toward more sustainable construction materials,this study explores the impact of incorporating millet husks as an alternative to sand on the physical,mechanical,and thermal performance of lightweight concrete.Through a mixture design approach,five formulations were selected and thoroughly characterized.The analysis of iso-response curves enabled an in-depth assessment of the cross-effects between formulation parameters and their interactions on the final properties of the material.The results show that integrating millet husks leads to a significant reduction in density,reaching up to 21%,while maintaining notable mechanical performance.A balanced formulation of sand and fibers achieved a maximum compressive strength of 12.11 MPa,demonstrating that,under specific conditions,plant fibers actively contribute to the structural integrity of the composite.In tensile strength,the positive influence of fibers is even more pronounced,with a maximum resistance of 8.62 MPa,highlighting their role in enhancing material cohesion.From a thermal perspective,millet husks reduce both thermal conductivity and effusivity,thereby limiting heat transfer and accumulation within the composite.Iso-response curve analysis reveals that these effects are directly linked to the proportions of the constituents and that achieving an optimal balance between sand,fibers,and cement is key to maximizing performance.These findings demonstrate that the adopted approach allows moving beyond conventional substitution methods by identifying optimal configurations for the design of lightweight bio-based concretes that are both strong and insulating,thereby confirming the potential of millet husks in developing lightweight concretes suitable for sustainable construction applications.
文摘An efficient and novel approach is proposed for oxidative arylation of bio-based furfuryl alcohol(FA)to aryl furans(AFs),a versatile monomer of photoelectric materials,in the presence of UiO-67-Pd(F)with phenanthroline/bipyridine,and poly-F substituted phenyl ligands as the mixture linkers.The results of control experiments and theoretical calculations reveal that the–F on the phenyl linkers efficiently tunes the electron-deficient nature of Pd through the Zr_(6) clusters bridges,which favors the adsorption and activation of the furan ring.Furthermore,the conjugation of different nitrogen-containing ligands facilitates Pd coordination for the Heck-type insertion and subsequent electrophilic palladation,respectively.As a result,the oxidative arylation of FA derivatives is substantially enhanced because of these electronic and steric synergistic effects.Under the optimized conditions,72.2%FA conversion and 74.8%mono aryl furan(MAF)selectivity are shown in the Heck-type insertion.Meanwhile,85.3%of MAF is converted,affording 74.8%selectivity of final product(AFs)in the subsequent electrophilic palladation reaction.This process efficiency is remarkably higher than that with homogeneous catalysts.In addition,furan-benzene polymer obtained from the halogen-free synthesis catalyzed by UiO-67-Pd(F)show significantly better properties than that from conventional Suzuki coupling method.Therefore,the present work provides a new insight for useful AFs synthesis by oxidative arylation of bio-furan via rational tunning the metal center micro-environment of heterogeneous catalyst.
基金support from the Scarce and Quality Economic Forest Engineering Technology Research Center(2022GCZX002)the Key Lab.of Biomass Energy and Material,Jiangsu Province(Grant No.JSBEM-S-202305)the Forestry Scientific Research Monitoring Project of Guangdong Province(2025KJXM01).
文摘In this study,3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate(ECC)and refined Camellia oleifera seed oil(RCOSO)obtained from saponification and acidified hydrolysis has been used as raw materials to perform ring-opening reactions for the preparation of cyclohexyl acrylate derivative(CAR).The structure of the synthesized product was characterized using infrared spectroscopy,Raman spectroscopy,and nuclear magnetic resonance spectroscopy.CAR was employed as a plasticizer to produce modified polyvinyl chloride(PVC)films,dioctyl phthalate plasticizer(DOP)used in reference samples to investigate the influence of different plasticizer molecular structures on the properties of PVC films.Observation suggested that(1)CAR plasticizer was successfully synthesized;(2)CAR can interact with PVC,exhibiting good compatibility;(3)PVC films contain CAR showed improved thermal stability,hydrophilicity,and tensile strength.Therefore,CAR has the potential to replace DOP as a plasticizer for PVC.
文摘The strength and damping properties of Co-Ni-Cr-Mo-based alloys with 0.5wt%Nb addition after various plastic deformation and heat treatment processes were investigated.Through Vickers hardness tests,free resonance Young's modulus measurements,and microstructure analysis,the effects of dislocation density,vacancy formation,and recrystallization on the alloy performance were clarified.Results indicate that increasing the rolling reduction enhances damping property due to higher dislocation density,whereas aging below the recrystallization temperature reduces damping property via dislocation pinning by the Suzuki effect.Recrystallization heat treatment restores the original structure and damping level.This alloy possesses tensile strength of approximately 1500 MPa and logarithmic decrement valueδ^(-1) in the range of 2×10^(-4)–3×10^(-4),demonstrating superior mechanical properties compared with the Ti-based alloys,which makes it an excellent candidate material for ultrasonic tools and medical applications.
文摘Nonlinear static procedures are widely adopted in structural engineering practice for seismic performance assessment due to their simplicity and computational efficiency.However,their reliability depends heavily on how the nonlinear behaviour of structural components is represented.The recent earthquakes in Albania(2019)and Türkiye(2023)have underscored the need for accurate assessment techniques,particularly for older reinforced concrete buildings with poor detailing.This study quantifies the discrepancies between default and user-defined component modelling in pushover analysis of pre-modern reinforced concrete structures,analysing two representative low-and mid-rise reinforced concrete frame buildings.The lumped plasticity approach incorporates moment-rotation relationships derived from actual member properties and reinforcement configurations,while the distributed plasticity approach uses software-generated default properties based on modern codes.Results show that the distributed plasticity models systematically overestimate both the strength and the deformation capacity by up to 35%compared to lumped plasticity models,especially in buildings with poor detailing and low concrete strength.These findings demonstrate that default software procedures,widely used in practice but not validated for pre-modern structures,produce dangerously unconservative seismic performance estimates.The study provides quantitative evidence of the critical need for tailored modelling strategies that reflect the actual conditions of the existing building stock.
基金financially supported by King Abdulaziz University,Deanship of Scientific Research(DSR)。
文摘Neuronal plasticity,the brain's ability to adapt structurally and functionally,is essential for learning,memory,and recovery from injuries.In neurodegenerative diseases such as Alzheimer's disease and Parkinson's disease,this plasticity is disrupted,leading to cognitive and motor deficits.This review explores the mechanisms of neuronal plasticity and its effect on Alzheimer's disease and Parkinson's disease.Alzheimer's disease features amyloid-beta plaques and tau tangles that impair synaptic function,while Parkinson's disease involves the loss of dopaminergic neurons affecting motor control.Enhancing neuronal plasticity offers therapeutic potential for these diseases.A systematic literature review was conducted using databases such as PubMed,Scopus,and Google Scholar,focusing on studies of neuronal plasticity in Alzheimer's disease and Parkinson's disease.Data synthesis identified key themes such as synaptic mechanisms,neurogenesis,and therapeutic strategies,linking molecular insights to clinical applications.Results highlight that targeting synaptic plasticity mechanisms,such as long-term potentiation and long-term depression,shows promise.Neurotrophic factors,advanced imaging techniques,and molecular tools(e.g.,clustered regularly interspaced short palindromic repeats and optogenetics)are crucial in understanding and enhancing plasticity.Current therapies,including dopamine replacement,deep brain stimulation,and lifestyle interventions,demonstrate the potential to alleviate symptoms and improve outcomes.In conclusion,enhancing neuronal plasticity through targeted therapies holds significant promise for treating neurodegenerative diseases.Future research should integrate multidisciplinary approaches to fully harness the therapeutic potential of neuronal plasticity in Alzheimer's disease and Parkinson's disease.
基金supported by the National Natural Science Foundation of China(Nos.52161145409,21976116)SAFEA of China("Belt and Road"Innovative Talent Exchange Foreign Expert Project No.2023041004L)+1 种基金(High-end Foreign Expert Project No.G2023041021L)Alexander-von-Humboldt Foundation of Germany(Group-Linkage Program).
文摘Photoreforming poly(lactic acid)(PLA)plastics into pyruvic acid(PA)coupled with hydrogen evolution is of great significance for sustainable development.However,a significant challenge lies inα-OH bond cleaving of lactic acid(LA).Herein,CdS/Bi_(4)Ti_(3)O_(12)composite is fabricated,bridged by Bi−S bonds,through in-situ growth of CdS nanoparticles on Bi_(4)Ti_(3)O_(12)nanoflowers for the successive removal of hydrogen fromα-C in LA.In-situ X-ray photoelectron spectroscopy confirms the S-scheme carriers transfer route and interfacial Bi−S bond in CdS/Bi_(4)Ti_(3)O_(12).Consequently,the photo-electrons and holes with extended lifetimes and strong redox potential accumulate in the CdS conduction band and Bi_(4)Ti_(3)O_(12)valence band,respectively,as evidenced by in-situ electron spin resonance and time-resolved photoluminescence.This facilitates the generation of·OH radicals,which further participate in the successive dehydrogenation reaction of LA.Consequently,the photoreforming efficiencies of converting PLA into PA and H_(2)by CdS/Bi_(4)Ti_(3)O_(12)are 1.7 and 3.16 mmol g^(-1)h^(-1),which are respectively 2.8 and 22 times higher than that by pristine Bi_(4)Ti_(3)O_(12).The present work provides a new approach for designing S-scheme to achieve hydrogen production and value-added conversion of plastics.
基金supported by Japan Society forthe Promotion of Science(JSPS)Grants-in-Aidfor Scientific Research(KAKENHI)(20H05894,20H05903,21K15136,22K21351,23H02518A,23H02663,and 23K18147 to SS),JST-CREST(JPMJCR24T4 to SS),the World PremierInternational Research Center Initiative(WPI)fromthe Ministry of Education,Culture,Sports,Scienceand Technology(MEXT)to SS(WPI-IIIS),the TopRunners in Strategy of Transborder AdvancedResearches(TRiSTAR)by the MEXT to SSJapanAgency for Medical Research and Development(AMED)(JP21zf0127005 to SS),Cell ScienceResearch Foundation Grant to YI,38th Brain ScienceFoundation Research Grant to YI,Research Granton Biogenic Amines and Neurological Diseases(Sumitomo pharma)to YI.
文摘Sleep is a fundamental biological process essential for maintaining brain function,cognitive performance,and overall health.Despite over a century of research,the mechanisms underlying sleep homeostasis-the process by which the need for sleep accumulates during wakefulness and dissipates during sleep-remain incompletely understood.This article explores the latest advancements in sleep research,focusing on the role of synaptic plasticity in sleep homeostasis,as illuminated by Sawada et al.(2024).
基金funded by the Alexander von Humboldt Stiftungsupported by DFG (SCH W534/6-1 to SWS)
文摘The dentate gyrus of the hippocampus is a plastic structure that displays modifications at different levels in response to positive stimuli as well as to negative conditions such as brain damage.The latter involves global alterations,making understanding plastic responses triggered by local damage difficult.One key feature of the dentate gyrus is that it contains a well-defined neurogenic niche,the subgranular zone,and beyond neurogenesis,newly born granule cells may maintain a“young”phenotype throughout life,adding to the plastic nature of the structure.Here,we present a novel experimental model of local brain damage in organotypic entorhino-hippocampal cultures that results in the activation of adjacent newly born granule cells.A small piece of filter paper was placed on the surface of the granule cell layer of the dentate gyrus,which evoked a foreign body reaction of astrocytes,along with the activation of local young neurons expressing doublecortin.Forty-eight hours after foreign body placement,the number of doublecortin-immunoreactive cells increased in the subgranular zone in the direct vicinity of the foreign body,whereas overall increased doublecortin immunoreactivity was observed in the granule cell layer and molecular layer of the dentate gyrus.Foreign body placement in the pyramidal layer of the CA1 region evoked a comparable local astroglial reaction but did not lead to an increase in doublecortin-immunoreactive in either the CA1 region or the adjacent dentate gyrus.Seven days after foreign body placement in the dentate gyrus,the increase in doublecortin-immunoreactivity was no longer observed,indicating the transient activation of young cells.However,7 days after foreign body placement,the number of doublecortin-immunoreactive granule cells coimmunoreactive for calbindin was lower than that under the control conditions.As calbindin is a marker for mature granule cells,this result suggests that activated young cells remain at a more immature stage following foreign body placement.Live imaging of retrovirally green fluorescent protein-labeled newly born granule cells revealed the orientation and growth of their dendrites toward the foreign body placement.This novel experimental model of foreign body placement in organotypic entorhino-hippocampal cultures could serve as a valuable tool for studying both glial reactivity and neuronal plasticity,specifically of newly born neurons under controlled in vitro conditions.
基金the Ministry of Higher Education of Malaysia for providing financial support for this research through the Transdisciplinary Research Grant Scheme(TRGS)No.TRGS/1/2018/UMP/01/1(University Reference:RDU191801-5).
文摘This study examines the literature on bio-based and biodegradable plastics published between 2000 and 2021 and provides insights and research suggestions for the future.The study gathers data from the Scopus and ISI Web of Science databases,then picks 1042 publications objectively and analyses their metadata.Furthermore,144 papers from the Web of Science are analysed to present insights and classifications of the literature based on content analyses,including assessment/evaluation of the sustainability of bio-based and biodegradable Plastics,sustainability of biodegradable Plastics,and factors driving the uptake of biodegradable plastics.The study finds that most research on bio-based and biodegradable plastic film evaluations considered only one dimension of sustainability,few considered two dimensions,and very few considered three dimensions.Though,in recent years,academic and industrial interest has grown dramatically in biodegradable plastics towards sustainability.The triple bottom line method in this report(economic benefit,social responsibility,and environmental protection)was employed to assess the biodegradable plastics towards sustainability.Top journals,Influential authors,top contributing institutions,top contributing nations,and contributions by fields are all identified in this study.This research gives a detailed but straightforward theoretical design of bio-based and biodegradable polymers.The study’s results and future research initiatives provide a new path for further investigation and contribution to the field.
基金supported by the National Natural Science Foundation of China(No.52371004,52201144,52071040,U20A20230).
文摘Bending is a crucial operation in the sheet forming of Mg alloys for automotive and aerospace applications.In this work,three kinds of sheets from an AZ31 rolled plate,sheared at 0°(S0),45°(S45),and 90°(S90)to the rolling direction,were subjected to three-point bending tests.In-situ digital image correlation(DIC)system was employed to capture the strain fields.Electron backscatter diffraction(EBSD)was used to examine the through-thickness microstructures.A crystal plasticity finite element method(CPFEM)incorporating twinning and slip mechanisms was developed to simulate the bending deformation.The texture effect on the neutral layer shift and twinning behaviors was systematically investigated in terms of both experiments and simulations.The results show that CPFEM effectively simulated the texturedependent shifting behaviors of neutral layer and the associated twinning behaviors.Particularly,the spatial distributions of neutral layer across the entire bent plates were captured by both DIC and CPFEM.Additionally,some unusual twinning behaviors were analyzed in depth,such as the{10-12}-{10-12}secondary twins in S90,localized twin bands in S0,and the twin traces difference in S45.These findings reveal a close relationship between the neutral layer shift and twinning activity induced by the initial texture and strain levels.This work provides valuable insights into the bending deformation mechanisms of Mg alloys and has important implications for improving their formability and controlling springback.
基金supported by the National Natural Science Foundation of China(22072048)the Guangdong Provincial Department of Science and Technology(2021A1515010128 and 2022A0505050013).
文摘Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimensional optimization strategy to alleviate the side reactions between SN and Li metal,and develop a highly stable poly-vinylethylene carbonate-based PPCE(PPCE-VEC).Moreover,we identify the intrinsic factors of multi-dimensional polymer structures on the electrolyte stability by three typical classes of polyesters.The PPCE-VEC constructed by in situ polymerization exhibits much better stability than poly-vinylene carbonate-based PPCE(PPCE-VCA)and poly-trifluoroethyl acrylate-based PPCE(PPCE-TFA),which is verified by its fewer SN-decomposition species in X-ray photoelectron spectroscopy(XPS)and outstanding full cell performance.The PPCE-VEC-enabled LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)full cell achieve 73.7%capacity retention after 1400 cycles,which outperforms PPCE-VCA-and PPCE-TFA-enabled full cells(61.9%and 46.9%).Spectral analysis and theoretical calculation reveal that the high solvation ability of the carbonyl site,flexible polymer chain,and homogeneous electrolyte phase of PPCE-VEC are favorable to maximizing competition coordination with Li^(+)to weaken the Li^(+)–SN binding and shape an anion-rich solvation structure.This optimized polymer-involved Li^(+)solvation enhances SN stability and facilitates the formation of B/F enriched solid-electrolyte interphase(SEI),thus significantly improving PPCE stability.
