The formation of metal cation complexes between o-phenylenediamine with metal ions, Ni2+, Cu2+, Zn2+, Pb2+ and Cr3+ were studied in the dimethylformamide/water(DMF/H2O), acetonitrile/water(AN/H2O) and ethanol/water(Et...The formation of metal cation complexes between o-phenylenediamine with metal ions, Ni2+, Cu2+, Zn2+, Pb2+ and Cr3+ were studied in the dimethylformamide/water(DMF/H2O), acetonitrile/water(AN/H2O) and ethanol/water(EtOH/H2O) binary systems using square wave polarography (SWP) technique. The stoichiometry and stability of the complexes were determined by monitoring the shifts in half-waves or peak potentials of the polarographic waves of metal ions against the ligand concentration. In the most cases, the formation constants of complexes decreased with increasing amounts of H2O, DMF and EtOH in AN/H2O, DMF/H2O and EtOH/H2O binary systems, respectively. The stoichiometry of the complexes was found 1:1. The results obtained show that there is an inverse relationship between the formation constant of the complexes and the donor number of the solvents based on the Gatmann donocity scale. Also, the stability constants show a high sensitivity to the composition of the mixed solvent systems. In most of the systems investigated, Cr3+ cation forms a more stable complex with o-phenylenediamine than other four cations and the order of selectivity of this ligand for cations in pure water is:Cr3+>>Cu2+>Ni2+>Zn2+>Pb2+.展开更多
Prior to formation of the micelles of cationic surfactant (CSF), bromopyrogallol red (BPR) could exist in the forms of both monomer and oligomer After that, however, only BPR monomer existed. Nonionic surfactant OP-10...Prior to formation of the micelles of cationic surfactant (CSF), bromopyrogallol red (BPR) could exist in the forms of both monomer and oligomer After that, however, only BPR monomer existed. Nonionic surfactant OP-10 favoured the oligomerization of BPR monomer. The mixed micellar media prepared by mixing CSF and OP-10 in an appropriate ratio could be used for the sensitive and selective determination of Mo in Mo/W binary mixtures.展开更多
In 5G new radio(NR), polar codes are adopted for e MBB downlink control channels where the blind detection is employed in user equipment(UE) to identify the correct downlink control information(DCI). However, differen...In 5G new radio(NR), polar codes are adopted for e MBB downlink control channels where the blind detection is employed in user equipment(UE) to identify the correct downlink control information(DCI). However, different from that in the 4G LTE system, the cyclic redundancy check(CRC) in polar decoding plays both error correction and error detection roles. Consequently, the false alarm rates(FAR) may not meet the system requirements(FAR<1.52 × 10^(−5)). In this paper, to mitigate the FAR in polar code blind detection, we attach a binary classifier after the polar decoder to further remove the false alarm results and meanwhile retain the correct DCI. This classifier works by tracking the squared Euclidean distance ratio(SEDR) between the received signal and hypothesis. We derive an analytical method to fast compute proper classification threshold that is implementation-friendly in practical use. Combining the well-designed classifier, we show that some very short CRC sequences can even be used to meet the FAR requirements. This consequently reduces the CRC overhead and contributes to the system error performance improvements.展开更多
The global pandemic of novel coronavirus that started in 2019 has ser-iously affected daily lives and placed everyone in a panic condition.Widespread coronavirus led to the adoption of social distancing and people avo...The global pandemic of novel coronavirus that started in 2019 has ser-iously affected daily lives and placed everyone in a panic condition.Widespread coronavirus led to the adoption of social distancing and people avoiding unneces-sary physical contact with each other.The present situation advocates the require-ment of a contactless biometric system that could be used in future authentication systems which makesfingerprint-based person identification ineffective.Periocu-lar biometric is the solution because it does not require physical contact and is able to identify people wearing face masks.However,the periocular biometric region is a small area,and extraction of the required feature is the point of con-cern.This paper has proposed adopted multiple features and emphasis on the periocular region.In the proposed approach,combination of local binary pattern(LBP),color histogram and features in frequency domain have been used with deep learning algorithms for classification.Hence,we extract three types of fea-tures for the classification of periocular regions for biometric.The LBP represents the textual features of the iris while the color histogram represents the frequencies of pixel values in the RGB channel.In order to extract the frequency domain fea-tures,the wavelet transformation is obtained.By learning from these features,a convolutional neural network(CNN)becomes able to discriminate the features and can provide better recognition results.The proposed approach achieved the highest accuracy rates with the lowest false person identification.展开更多
Although the Ostwald ripening approach is often utilized to manufacture single hollow metal oxide,constructing hollow binary oxide heterostructures as potent photoelectrochemical(PEC)catalysts is still obscure and cha...Although the Ostwald ripening approach is often utilized to manufacture single hollow metal oxide,constructing hollow binary oxide heterostructures as potent photoelectrochemical(PEC)catalysts is still obscure and challenging.Herein,we reveal a general strategy for fabricating hollow binary oxides heterostructures(Co_(3)O_(4)-δ-MnO_(2)and Co_(3)O_(4)–SnO_(2))utilizing Ostwald ripening.Hollow Co_(3)O_(4)-δ-MnO_(2)nano-network with the structure evolution process was systematically explored through experimental and theoretical tools,identifying the origin of hollow binary oxides due to the interfaces acting as landing sites for their growth.In addition,the structural evolution,from hollow Co_(3)O_(4)-δ-MnO_(2)to Co_(3)O_(4)-α-MnO_(2),can be observed when the time of secondary hydrothermal reaches 96 h due to the topotactic layer-to-tunnel transition process.Notably,optimized Co_(3)O_(4)-δ-MnO_(2)-48 exhibits a superior PEC degradation efficiency of 96.42%and excellent durability(20,000 min)under harsh acid conditions,attributed to the massive hollow structures'vast surface area for high intently active species.Furthermore,density functional theory simulations elucidated the Co_(3)O_(4)-δ-MnO_(2)’electron-deficient surface and high d-band center(Co_(3)O_(4)-δ-MnO_(2),-1.06;Co_(3)O_(4)-α-MnO_(2),-1.49),strengthening the interaction between the catalyst's surface and active species and prolonging the lifetime of active species ofO_(2)and 1 O_(2).This work not only demonstrates superior PEC degradation efficiency of hollow Co_(3)O_(4)-δ-MnO_(2)for practical use but also lays the cornerstone for constructing hollow binary oxides heterostructures through Ostwald ripening.展开更多
There are plenty of issues need to be solved before the practi-cal application of Li-and Mn-rich cathodes,including the detrimental voltage decay and mediocre rate capability,etc.Element doping can e ectively solve th...There are plenty of issues need to be solved before the practi-cal application of Li-and Mn-rich cathodes,including the detrimental voltage decay and mediocre rate capability,etc.Element doping can e ectively solve the above problems,but cause the loss of capacity.The introduction of appropriate defects can compensate the capacity loss;however,it will lead to structural mismatch and stress accumulation.Herein,a three-in-one method that combines cation–polyanion co-doping,defect construction,and stress engineering is pro-posed.The co-doped Na^(+)/SO_(4)^(2-)can stabilize the layer framework and enhance the capacity and voltage stability.The induced defects would activate more reac-tion sites and promote the electrochemical performance.Meanwhile,the unique alternately distributed defect bands and crystal bands structure can alleviate the stress accumulation caused by changes of cell parameters upon cycling.Consequently,the modified sample retains a capacity of 273 mAh g^(-1)with a high-capacity retention of 94.1%after 100 cycles at 0.2 C,and 152 mAh g^(-1)after 1000 cycles at 2 C,the corresponding voltage attenuation is less than 0.907 mV per cycle.展开更多
文摘The formation of metal cation complexes between o-phenylenediamine with metal ions, Ni2+, Cu2+, Zn2+, Pb2+ and Cr3+ were studied in the dimethylformamide/water(DMF/H2O), acetonitrile/water(AN/H2O) and ethanol/water(EtOH/H2O) binary systems using square wave polarography (SWP) technique. The stoichiometry and stability of the complexes were determined by monitoring the shifts in half-waves or peak potentials of the polarographic waves of metal ions against the ligand concentration. In the most cases, the formation constants of complexes decreased with increasing amounts of H2O, DMF and EtOH in AN/H2O, DMF/H2O and EtOH/H2O binary systems, respectively. The stoichiometry of the complexes was found 1:1. The results obtained show that there is an inverse relationship between the formation constant of the complexes and the donor number of the solvents based on the Gatmann donocity scale. Also, the stability constants show a high sensitivity to the composition of the mixed solvent systems. In most of the systems investigated, Cr3+ cation forms a more stable complex with o-phenylenediamine than other four cations and the order of selectivity of this ligand for cations in pure water is:Cr3+>>Cu2+>Ni2+>Zn2+>Pb2+.
文摘Prior to formation of the micelles of cationic surfactant (CSF), bromopyrogallol red (BPR) could exist in the forms of both monomer and oligomer After that, however, only BPR monomer existed. Nonionic surfactant OP-10 favoured the oligomerization of BPR monomer. The mixed micellar media prepared by mixing CSF and OP-10 in an appropriate ratio could be used for the sensitive and selective determination of Mo in Mo/W binary mixtures.
基金supported in part by National Natural Science Foundation of China(No.62471054)in part by National Natural Science Foundation of China(No.92467301)+3 种基金in part by the National Natural Science Foundation of China(No.62201562)in part by the National Natural Science Foundation of China(No.62371063)in part by the National Natural Science Foundation of China(No.62321001)in part by Liaoning Provincial Natural Science Foundation of China(No.2024–BSBA–51).
文摘In 5G new radio(NR), polar codes are adopted for e MBB downlink control channels where the blind detection is employed in user equipment(UE) to identify the correct downlink control information(DCI). However, different from that in the 4G LTE system, the cyclic redundancy check(CRC) in polar decoding plays both error correction and error detection roles. Consequently, the false alarm rates(FAR) may not meet the system requirements(FAR<1.52 × 10^(−5)). In this paper, to mitigate the FAR in polar code blind detection, we attach a binary classifier after the polar decoder to further remove the false alarm results and meanwhile retain the correct DCI. This classifier works by tracking the squared Euclidean distance ratio(SEDR) between the received signal and hypothesis. We derive an analytical method to fast compute proper classification threshold that is implementation-friendly in practical use. Combining the well-designed classifier, we show that some very short CRC sequences can even be used to meet the FAR requirements. This consequently reduces the CRC overhead and contributes to the system error performance improvements.
文摘The global pandemic of novel coronavirus that started in 2019 has ser-iously affected daily lives and placed everyone in a panic condition.Widespread coronavirus led to the adoption of social distancing and people avoiding unneces-sary physical contact with each other.The present situation advocates the require-ment of a contactless biometric system that could be used in future authentication systems which makesfingerprint-based person identification ineffective.Periocu-lar biometric is the solution because it does not require physical contact and is able to identify people wearing face masks.However,the periocular biometric region is a small area,and extraction of the required feature is the point of con-cern.This paper has proposed adopted multiple features and emphasis on the periocular region.In the proposed approach,combination of local binary pattern(LBP),color histogram and features in frequency domain have been used with deep learning algorithms for classification.Hence,we extract three types of fea-tures for the classification of periocular regions for biometric.The LBP represents the textual features of the iris while the color histogram represents the frequencies of pixel values in the RGB channel.In order to extract the frequency domain fea-tures,the wavelet transformation is obtained.By learning from these features,a convolutional neural network(CNN)becomes able to discriminate the features and can provide better recognition results.The proposed approach achieved the highest accuracy rates with the lowest false person identification.
基金supported by the National Natural Science Foundation of China(21875026,21878031)the Program for Liaoning Excellent Talents in University(LR2014013)+4 种基金the Science and Technology Foundation of Liaoning Province(No.201602052)the Natural Science Foundation of Liaoning Province(No.20170520427)supported by Liaoning Revitalization Talents Program(XLYC1802124)sponsored by the Liaoning BaiQianWan Talents Program,the scientific research fund of the educational department of Liaoning province(J2019013)The Joint Research Fund Liaoning-Shenyang National Laboratory for Materials Science(Project number:2019JH3/30100034,contract number:2019010278-JH3/301).
文摘Although the Ostwald ripening approach is often utilized to manufacture single hollow metal oxide,constructing hollow binary oxide heterostructures as potent photoelectrochemical(PEC)catalysts is still obscure and challenging.Herein,we reveal a general strategy for fabricating hollow binary oxides heterostructures(Co_(3)O_(4)-δ-MnO_(2)and Co_(3)O_(4)–SnO_(2))utilizing Ostwald ripening.Hollow Co_(3)O_(4)-δ-MnO_(2)nano-network with the structure evolution process was systematically explored through experimental and theoretical tools,identifying the origin of hollow binary oxides due to the interfaces acting as landing sites for their growth.In addition,the structural evolution,from hollow Co_(3)O_(4)-δ-MnO_(2)to Co_(3)O_(4)-α-MnO_(2),can be observed when the time of secondary hydrothermal reaches 96 h due to the topotactic layer-to-tunnel transition process.Notably,optimized Co_(3)O_(4)-δ-MnO_(2)-48 exhibits a superior PEC degradation efficiency of 96.42%and excellent durability(20,000 min)under harsh acid conditions,attributed to the massive hollow structures'vast surface area for high intently active species.Furthermore,density functional theory simulations elucidated the Co_(3)O_(4)-δ-MnO_(2)’electron-deficient surface and high d-band center(Co_(3)O_(4)-δ-MnO_(2),-1.06;Co_(3)O_(4)-α-MnO_(2),-1.49),strengthening the interaction between the catalyst's surface and active species and prolonging the lifetime of active species ofO_(2)and 1 O_(2).This work not only demonstrates superior PEC degradation efficiency of hollow Co_(3)O_(4)-δ-MnO_(2)for practical use but also lays the cornerstone for constructing hollow binary oxides heterostructures through Ostwald ripening.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51931006 and 51871188)the National Key R&D Program of China(No.2016YFA0202602)+4 种基金the Science and Technology Plan-ning Projects of Fujian Province of China(Grant No.2020H0005)the Natural Science Foundation of Fujian Province of China(No.2020J05014)Guangdong Basic and Applied Basic Research Foundation(Nos.2021A1515010139 and 2019A1515011070)the Fundamental Research Funds for the Central Universities of China(Xiamen University:Nos.20720200068,20720190013,and 20720200080)the“Double-First Class”Foundation of Mate-rials Intelligent Manufacturing Discipline of Xiamen University。
文摘There are plenty of issues need to be solved before the practi-cal application of Li-and Mn-rich cathodes,including the detrimental voltage decay and mediocre rate capability,etc.Element doping can e ectively solve the above problems,but cause the loss of capacity.The introduction of appropriate defects can compensate the capacity loss;however,it will lead to structural mismatch and stress accumulation.Herein,a three-in-one method that combines cation–polyanion co-doping,defect construction,and stress engineering is pro-posed.The co-doped Na^(+)/SO_(4)^(2-)can stabilize the layer framework and enhance the capacity and voltage stability.The induced defects would activate more reac-tion sites and promote the electrochemical performance.Meanwhile,the unique alternately distributed defect bands and crystal bands structure can alleviate the stress accumulation caused by changes of cell parameters upon cycling.Consequently,the modified sample retains a capacity of 273 mAh g^(-1)with a high-capacity retention of 94.1%after 100 cycles at 0.2 C,and 152 mAh g^(-1)after 1000 cycles at 2 C,the corresponding voltage attenuation is less than 0.907 mV per cycle.
