A fully coupling model for the diffusion induced finite elastoplastic bending of bilayer electrodes in lithium-ion batteries is proposed. The effect of the mechanical stress on the lithium diffusion is accounted for b...A fully coupling model for the diffusion induced finite elastoplastic bending of bilayer electrodes in lithium-ion batteries is proposed. The effect of the mechanical stress on the lithium diffusion is accounted for by the mechanical part of the chemical potential derived from the Gibbs free energy along with the logarithmic stress and strain. Eight dimensionless parameters, governing the stress-assisted diffusion and the diffusion induced elastoplastic bending, are identified. It is found that the finite plasticity starting from the interface of the bilayer increases the chemical potential gradient and thereby facilitates the lithium diffusion. The full plastic flow makes the abnormal lithium concentration distribution possible, i.e., the concentration at the lithium inlet can be lower than the concentration at the interface(downstream). The increase in the thickness of the active layer during charging is much larger than the eigen-stretch due to lithiation, and this excess thickening is found to be caused by the lithiation induced plastic yield.展开更多
The new generation of electronics tends to be well-performed,facile and environmentally friendly.Here,we report a bio-assembled sensitive pressure senor based on reduced graphene oxide-bacterial cellulose/bacterial ce...The new generation of electronics tends to be well-performed,facile and environmentally friendly.Here,we report a bio-assembled sensitive pressure senor based on reduced graphene oxide-bacterial cellulose/bacterial cellulose(RGO-BC/BC)bilayer films,integrated by bacteria in one step.The advantage of this integration is that there is strong nanofiber connection between the conductive RGO-BC and insulative highly compressible porous BC layer,which confers RGO-BC/BC film electrode with good robustness,tailorability,flexibility and wearability.Without extra bonding-interface or postprocessing,the RGO-BC/BC bilayer films could be directly assembled into pressure sensing devices.Ascribed from the good reversible compressibility of the BC layer and incorporated bilayer structure,the pressure sensor performs good sensitivity and excellent durability and bending stability.The facile sensitive capacitive sensor could monitor the human hand or finger motion in real time.The sensing array is able to detect the spatial distribution of pressure mounted in the flat plane as well as curved surface of human body,succeeding in the correction of human walking posture for health care.The e-skins are potential in wearable electronics,artificial intelligence,soft robots,healthcare etc.展开更多
Bilayer electrode, composed of a current collector layer and an active material layer, has great potential in applications of in-situ electrochemical experiments due to the bending upon lithiation. This paper establis...Bilayer electrode, composed of a current collector layer and an active material layer, has great potential in applications of in-situ electrochemical experiments due to the bending upon lithiation. This paper establishes an elastoplastic theory for the lithiation induced deformation of bilayer electrode with consideration of the plastic yield of current collector. It is found that the plastic yield of current collector reduces the restriction of current collector to an active layer, and therefore, enhances in-plane stretching while lowers down the rate of electrode bending. Key parameters that influence the elastoplastic deformation are identified. It is found that the smaller thickness ratio and lower elastic modulus ratio of current collector to an active layer would lead to an earlier plastic yield of the current collector, the larger in-plane strain, and the smaller bending curvature, due to balance between the current collector and the active layer. The smaller yield stress and plastic modulus of current collector have similar impacts on the electrode deformation.展开更多
For better performance of dye sensitized solar cells （DSSCs）, a bilayer structured electrode was constructed by employing a mesoporous anatase TiO2 overlayer above a commercial P25 TiO2 nanoparticles underlayer. The...For better performance of dye sensitized solar cells （DSSCs）, a bilayer structured electrode was constructed by employing a mesoporous anatase TiO2 overlayer above a commercial P25 TiO2 nanoparticles underlayer. The mesoporous anatase TiO2, prepared through a facile surfactant-assisted sol-gel process, possessed large pore size and well inter-connected network structure, both beneficial for dye adsorption and electron transfer. The dye adsorption capability of the mesoporous TiO2 was nearly twice that of the P25 counterpart. In the electrode, the mesoporous TiO2 film enhanced both dye adsorption and lightharvest, to increase photocurrent （Jsc） from 12.32 to 14.78 mA/cm^2. Compared to the single P25 TiO2 film, the synergy of the mesoporous TiO2 and the P25 TiO2 nanoparticle films in the electrode resulted in a 24% improvement in light-to-electricity conversion efficiency （η）. This bilayered electrode provides an alternative approach for further developing a photovoltaic device with better cell performance.展开更多
Li_(2)C_(2)O_(4),with a high theoretical capacity of 525 mAh·g^(−1)and good air stability,is regarded as a more attractive cathode prelithiation additive in contrast to the reported typical inorganic pre-lithiati...Li_(2)C_(2)O_(4),with a high theoretical capacity of 525 mAh·g^(−1)and good air stability,is regarded as a more attractive cathode prelithiation additive in contrast to the reported typical inorganic pre-lithiation compounds which are quite air sensitive.However,its obtained capacity is much lower than the theoretical value and its delithiation potential(>4.7 V)is too high to match with the most commercial cathode materials,which greatly impedes its practical application.Herein,we greatly improve the pre-lithiation performance of Li_(2)C_(2)O_(4)as cathode additive with fulfilled capacity at a much-reduced delithiation voltage,enabling its wide applicability for typical commercial cathodes.We increase the capacity of Li_(2)C_(2)O_(4)from 436 to 525 mAh·g^(−1)by reducing its particle size.Through optimizing the types of conductive additives,introducing nano-morphological NiO,MnO2,etc.as catalysts,and innovatively designing a bilayer electrode,the delithiation potential of Li_(2)C_(2)O_(4)is successfully reduced from 4.778 to 4.288 V.We systematically study different particle size,conductive additives,and catalysts on the delithiation behavior of Li_(2)C_(2)O_(4).Finally,it is applied to pre-lithiate the hard carbon anode,and it is found that Li_(2)C_(2)O_(4)could effectively increase the capacity of the full cell from 79.0 to 140.0 mAh·g^(−1)in the first cycle.In conclusion,our study proves that improving the reactivity is an effective strategy to boost the pre-lithiation of Li_(2)C_(2)O_(4).展开更多
基金Project supported by the National Natural Science Foundation of China(No.11332005)
文摘A fully coupling model for the diffusion induced finite elastoplastic bending of bilayer electrodes in lithium-ion batteries is proposed. The effect of the mechanical stress on the lithium diffusion is accounted for by the mechanical part of the chemical potential derived from the Gibbs free energy along with the logarithmic stress and strain. Eight dimensionless parameters, governing the stress-assisted diffusion and the diffusion induced elastoplastic bending, are identified. It is found that the finite plasticity starting from the interface of the bilayer increases the chemical potential gradient and thereby facilitates the lithium diffusion. The full plastic flow makes the abnormal lithium concentration distribution possible, i.e., the concentration at the lithium inlet can be lower than the concentration at the interface(downstream). The increase in the thickness of the active layer during charging is much larger than the eigen-stretch due to lithiation, and this excess thickening is found to be caused by the lithiation induced plastic yield.
基金supported by the National Natural Science Foundation of China(52073050)Shanghai Pujiang Program(16PJ1400500).
文摘The new generation of electronics tends to be well-performed,facile and environmentally friendly.Here,we report a bio-assembled sensitive pressure senor based on reduced graphene oxide-bacterial cellulose/bacterial cellulose(RGO-BC/BC)bilayer films,integrated by bacteria in one step.The advantage of this integration is that there is strong nanofiber connection between the conductive RGO-BC and insulative highly compressible porous BC layer,which confers RGO-BC/BC film electrode with good robustness,tailorability,flexibility and wearability.Without extra bonding-interface or postprocessing,the RGO-BC/BC bilayer films could be directly assembled into pressure sensing devices.Ascribed from the good reversible compressibility of the BC layer and incorporated bilayer structure,the pressure sensor performs good sensitivity and excellent durability and bending stability.The facile sensitive capacitive sensor could monitor the human hand or finger motion in real time.The sensing array is able to detect the spatial distribution of pressure mounted in the flat plane as well as curved surface of human body,succeeding in the correction of human walking posture for health care.The e-skins are potential in wearable electronics,artificial intelligence,soft robots,healthcare etc.
基金Project supported by the National Natural Science Foundation of China(Nos.11332005 and 11172159)the Innovation Program of Shanghai Municipal Education Commission(No.13ZZ070)
文摘Bilayer electrode, composed of a current collector layer and an active material layer, has great potential in applications of in-situ electrochemical experiments due to the bending upon lithiation. This paper establishes an elastoplastic theory for the lithiation induced deformation of bilayer electrode with consideration of the plastic yield of current collector. It is found that the plastic yield of current collector reduces the restriction of current collector to an active layer, and therefore, enhances in-plane stretching while lowers down the rate of electrode bending. Key parameters that influence the elastoplastic deformation are identified. It is found that the smaller thickness ratio and lower elastic modulus ratio of current collector to an active layer would lead to an earlier plastic yield of the current collector, the larger in-plane strain, and the smaller bending curvature, due to balance between the current collector and the active layer. The smaller yield stress and plastic modulus of current collector have similar impacts on the electrode deformation.
基金supported by the National Natural Science Foundation of China (20925621)Shanghai Rising-Star Program (09QH1400700,09QA1401500)+4 种基金Special Projects for Key Laboratories in Shanghai (09DZ2202000,10DZ2211100)Special Projects for Nanotechnology of Shanghai (0952nm02100)Shanghai Pujiang Program (09PJ1403200)Basic Research Program of Shanghai (10JC1403300)Fundamental Research Funds for the Central Universities
文摘For better performance of dye sensitized solar cells （DSSCs）, a bilayer structured electrode was constructed by employing a mesoporous anatase TiO2 overlayer above a commercial P25 TiO2 nanoparticles underlayer. The mesoporous anatase TiO2, prepared through a facile surfactant-assisted sol-gel process, possessed large pore size and well inter-connected network structure, both beneficial for dye adsorption and electron transfer. The dye adsorption capability of the mesoporous TiO2 was nearly twice that of the P25 counterpart. In the electrode, the mesoporous TiO2 film enhanced both dye adsorption and lightharvest, to increase photocurrent （Jsc） from 12.32 to 14.78 mA/cm^2. Compared to the single P25 TiO2 film, the synergy of the mesoporous TiO2 and the P25 TiO2 nanoparticle films in the electrode resulted in a 24% improvement in light-to-electricity conversion efficiency （η）. This bilayered electrode provides an alternative approach for further developing a photovoltaic device with better cell performance.
基金the financial support provided by the National Natural Science Foundation of China(No.52072138)the National Key Research and Development Program of China(No.2018YFE0206900)+1 种基金the Shenzhen Science and Technology Program(No.JCYJ20220530160816038)the Australian Research Council(ARC)through the Discovery Project(No.DP180102297).
文摘Li_(2)C_(2)O_(4),with a high theoretical capacity of 525 mAh·g^(−1)and good air stability,is regarded as a more attractive cathode prelithiation additive in contrast to the reported typical inorganic pre-lithiation compounds which are quite air sensitive.However,its obtained capacity is much lower than the theoretical value and its delithiation potential(>4.7 V)is too high to match with the most commercial cathode materials,which greatly impedes its practical application.Herein,we greatly improve the pre-lithiation performance of Li_(2)C_(2)O_(4)as cathode additive with fulfilled capacity at a much-reduced delithiation voltage,enabling its wide applicability for typical commercial cathodes.We increase the capacity of Li_(2)C_(2)O_(4)from 436 to 525 mAh·g^(−1)by reducing its particle size.Through optimizing the types of conductive additives,introducing nano-morphological NiO,MnO2,etc.as catalysts,and innovatively designing a bilayer electrode,the delithiation potential of Li_(2)C_(2)O_(4)is successfully reduced from 4.778 to 4.288 V.We systematically study different particle size,conductive additives,and catalysts on the delithiation behavior of Li_(2)C_(2)O_(4).Finally,it is applied to pre-lithiate the hard carbon anode,and it is found that Li_(2)C_(2)O_(4)could effectively increase the capacity of the full cell from 79.0 to 140.0 mAh·g^(−1)in the first cycle.In conclusion,our study proves that improving the reactivity is an effective strategy to boost the pre-lithiation of Li_(2)C_(2)O_(4).
