The highly efficient electrochemical treatment technology for dye-polluted wastewater is one of hot research topics in industrial wastewater treatment.This study reported a three-dimensional electrochemical treatment ...The highly efficient electrochemical treatment technology for dye-polluted wastewater is one of hot research topics in industrial wastewater treatment.This study reported a three-dimensional electrochemical treatment process integrating graphite intercalation compound(GIC)adsorption,direct anodic oxidation,and·OH oxidation for decolourising Reactive Black 5(RB5)from aqueous solutions.The electrochemical process was optimised using the novel progressive central composite design-response surface methodology(CCD-NPRSM),hybrid artificial neural network-extreme gradient boosting(hybrid ANN-XGBoost),and classification and regression trees(CART).CCD-NPRSM and hybrid ANN-XGBoost were employed to minimise errors in evaluating the electrochemical process involving three manipulated operational parameters:current density,electrolysis(treatment)time,and initial dye concentration.The optimised decolourisation efficiencies were 99.30%,96.63%,and 99.14%for CCD-NPRSM,hybrid ANN-XGBoost,and CART,respectively,compared to the 98.46%RB5 removal rate observed experimentally under optimum conditions:approximately 20 mA/cm^(2) of current density,20 min of electrolysis time,and 65 mg/L of RB5.The optimised mineralisation efficiencies ranged between 89%and 92%for different models based on total organic carbon(TOC).Experimental studies confirmed that the predictive efficiency of optimised models ranked in the descending order of hybrid ANN-XGBoost,CCD-NPRSM,and CART.Model validation using analysis of variance(ANOVA)revealed that hybrid ANN-XGBoost had a mean squared error(MSE)and a coefficient of determination(R^(2))of approximately 0.014 and 0.998,respectively,for the RB5 removal efficiency,outperforming CCD-NPRSM with MSE and R^(2) of 0.518 and 0.998,respectively.Overall,the hybrid ANN-XGBoost approach is the most feasible technique for assessing the electrochemical treatment efficiency in RB5 dye wastewater decolourisation.展开更多
This paper presents an investigation of the tribological performance of AA2024–B_(4)C composites,with a specific focus on the influence of reinforcement and processing parameters.In this study three input parameters ...This paper presents an investigation of the tribological performance of AA2024–B_(4)C composites,with a specific focus on the influence of reinforcement and processing parameters.In this study three input parameters were varied:B_(4)C weight percentage,milling time,and normal load,to evaluate their effects on two output parameters:wear loss and the coefficient of friction.AA2024 alloy was used as the matrix alloy,while B_(4)C particles were used as reinforcement.Due to the high hardness and wear resistance of B_(4)C,the optimized composite shows strong potential for use in aerospace structural elements and automotive brake components.The optimisation of tribological behaviour was conducted using a Taguchi-Grey Relational Analysis(Taguchi-GRA)and the Technique for Order of Preference by Similarity to Ideal Solution(TOPSIS).A total of 27 combinations of input parameters were analysed,varying the B_(4)C content(0,10,and 15 wt.%),milling time(0,15,and 25 h),and normal load(1,5,and 10 N).Wear loss and the coefficient of friction were numerically evaluated and selected as criteria for optimisation.Artificial Neural Networks(ANNs)were also applied for two outputs simultaneously.TOPSIS identified Alternative 1 as the optimal solution,confirming the results obtained using the Taguchi Grey method.The optimal condition obtained(10 wt.%B_(4)C,25 h milling time,10 N load)resulted in a minimum wear loss of 1.7 mg and a coefficient of friction of 0.176,confirming significant enhancement in tribological behaviour.Based on the results,both the B_(4)C content and the applied processing conditions have a significant impact on wear loss and frictional properties.This approach demonstrates high reliability and confidence,enabling the design of future composite materials with optimal properties for specific applications.展开更多
Proportioning is an important part of sintering,as it affects the cost of sintering and the quality of sintered ore.To address the problems posed by the complex raw material information and numerous constraints in the...Proportioning is an important part of sintering,as it affects the cost of sintering and the quality of sintered ore.To address the problems posed by the complex raw material information and numerous constraints in the sintering process,a multi-objective optimisation model for sintering proportioning was established,which takes the proportioning cost and TFe as the optimisation objectives.Additionally,an improved multi-objective beluga whale optimisation(IMOBWO)algorithm was proposed to solve the nonlinear,multi-constrained multi-objective optimisation problems.The algorithm uses the con-strained non-dominance criterion to deal with the constraint problem in the model.Moreover,the algorithm employs an opposite learning strategy and a population guidance mechanism based on angular competition and two-population competition strategy to enhance convergence and population diversity.The actual proportioning of a steel plant indicates that the IMOBWO algorithm applied to the ore proportioning process has good convergence and obtains the uniformly distributed Pareto front.Meanwhile,compared with the actual proportioning scheme,the proportioning cost is reduced by 4.3361¥/t,and the TFe content in the mixture is increased by 0.0367%in the optimal compromise solution.Therefore,the proposed method effectively balances the cost and total iron,facilitating the comprehensive utilisation of sintered iron ore resources while ensuring quality assurance.展开更多
We evaluate an adaptive optimisation methodology,Bayesian optimisation(BO),for designing a minimum weight explosive reactive armour(ERA)for protection against a surrogate medium calibre kinetic energy(KE)long rod proj...We evaluate an adaptive optimisation methodology,Bayesian optimisation(BO),for designing a minimum weight explosive reactive armour(ERA)for protection against a surrogate medium calibre kinetic energy(KE)long rod projectile and surrogate shaped charge(SC)warhead.We perform the optimisation using a conventional BO methodology and compare it with a conventional trial-and-error approach from a human expert.A third approach,utilising a novel human-machine teaming framework for BO is also evaluated.Data for the optimisation is generated using numerical simulations that are demonstrated to provide reasonable qualitative agreement with reference experiments.The human-machine teaming methodology is shown to identify the optimum ERA design in the fewest number of evaluations,outperforming both the stand-alone human and stand-alone BO methodologies.From a design space of almost 1800 configurations the human-machine teaming approach identifies the minimum weight ERA design in 10 samples.展开更多
Decomposition of a complex multi-objective optimisation problem(MOP)to multiple simple subMOPs,known as M2M for short,is an effective approach to multi-objective optimisation.However,M2M facilitates little communicati...Decomposition of a complex multi-objective optimisation problem(MOP)to multiple simple subMOPs,known as M2M for short,is an effective approach to multi-objective optimisation.However,M2M facilitates little communication/collaboration between subMOPs,which limits its use in complex optimisation scenarios.This paper extends the M2M framework to develop a unified algorithm for both multi-objective and manyobjective optimisation.Through bilevel decomposition,an MOP is divided into multiple subMOPs at upper level,each of which is further divided into a number of single-objective subproblems at lower level.Neighbouring subMOPs are allowed to share some subproblems so that the knowledge gained from solving one subMOP can be transferred to another,and eventually to all the subMOPs.The bilevel decomposition is readily combined with some new mating selection and population update strategies,leading to a high-performance algorithm that competes effectively against a number of state-of-the-arts studied in this paper for both multiand many-objective optimisation.Parameter analysis and component analysis have been also carried out to further justify the proposed algorithm.展开更多
In real-world applications, datasets frequently contain outliers, which can hinder the generalization ability of machine learning models. Bayesian classifiers, a popular supervised learning method, rely on accurate pr...In real-world applications, datasets frequently contain outliers, which can hinder the generalization ability of machine learning models. Bayesian classifiers, a popular supervised learning method, rely on accurate probability density estimation for classifying continuous datasets. However, achieving precise density estimation with datasets containing outliers poses a significant challenge. This paper introduces a Bayesian classifier that utilizes optimized robust kernel density estimation to address this issue. Our proposed method enhances the accuracy of probability density distribution estimation by mitigating the impact of outliers on the training sample’s estimated distribution. Unlike the conventional kernel density estimator, our robust estimator can be seen as a weighted kernel mapping summary for each sample. This kernel mapping performs the inner product in the Hilbert space, allowing the kernel density estimation to be considered the average of the samples’ mapping in the Hilbert space using a reproducing kernel. M-estimation techniques are used to obtain accurate mean values and solve the weights. Meanwhile, complete cross-validation is used as the objective function to search for the optimal bandwidth, which impacts the estimator. The Harris Hawks Optimisation optimizes the objective function to improve the estimation accuracy. The experimental results show that it outperforms other optimization algorithms regarding convergence speed and objective function value during the bandwidth search. The optimal robust kernel density estimator achieves better fitness performance than the traditional kernel density estimator when the training data contains outliers. The Naïve Bayesian with optimal robust kernel density estimation improves the generalization in the classification with outliers.展开更多
Cloud computing has rapidly evolved into a critical technology,seamlessly integrating into various aspects of daily life.As user demand for cloud services continues to surge,the need for efficient virtualization and r...Cloud computing has rapidly evolved into a critical technology,seamlessly integrating into various aspects of daily life.As user demand for cloud services continues to surge,the need for efficient virtualization and resource management becomes paramount.At the core of this efficiency lies task scheduling,a complex process that determines how tasks are allocated and executed across cloud resources.While extensive research has been conducted in the area of task scheduling,optimizing multiple objectives simultaneously remains a significant challenge due to the NP(Non-deterministic Polynomial)Complete nature of the problem.This study aims to address these challenges by providing a comprehensive review and experimental analysis of task scheduling approaches,with a particular focus on hybrid techniques that offer promising solutions.Utilizing the CloudSim simulation toolkit,we evaluated the performance of three hybrid algorithms:Estimation of Distribution Algorithm-Genetic Algorithm(EDA-GA),Hybrid Genetic Algorithm-Ant Colony Optimization(HGA-ACO),and Improved Discrete Particle Swarm Optimization(IDPSO).Our experimental results demonstrate that these hybrid methods significantly outperform traditional standalone algorithms in reducing Makespan,which is a critical measure of task completion time.Notably,the IDPSO algorithm exhibited superior performance,achieving a Makespan of just 0.64 milliseconds for a set of 150 tasks.These findings underscore the potential of hybrid algorithms to enhance task scheduling efficiency in cloud computing environments.This paper concludes with a discussion of the implications of our findings and offers recommendations for future research aimed at further improving task scheduling strategies,particularly in the context of increasingly complex and dynamic cloud environments.展开更多
Hardware-based sensing frameworks such as cooperative fuel research engines are conventionally used to monitor research octane number(RON)in the petroleum refining industry.Machine learning techniques are employed to ...Hardware-based sensing frameworks such as cooperative fuel research engines are conventionally used to monitor research octane number(RON)in the petroleum refining industry.Machine learning techniques are employed to predict the RON of integrated naphtha reforming and isomerisation processes.A dynamic Aspen HYSYS model was used to generate data by introducing artificial uncertainties in the range of±5%in process conditions,such as temperature,flow rates,etc.The generated data was used to train support vector machines(SVM),Gaussian process regression(GPR),artificial neural networks(ANN),regression trees(RT),and ensemble trees(ET).Hyperparameter tuning was performed to enhance the prediction capabilities of GPR,ANN,SVM,ET and RT models.Performance analysis of the models indicates that GPR,ANN,and SVM with R2 values of 0.99,0.978,and 0.979 and RMSE values of 0.108,0.262,and 0.258,respectively performed better than the remaining models and had the prediction capability to capture the RON dependence on predictor variables.ET and RT had an R2 value of 0.94 and 0.89,respectively.The GPR model was used as a surrogate model for fitness function evaluations in two optimisation frameworks based on genetic algorithm and particle swarm method.Optimal parameter values found by the optimisation methodology increased the RON value by 3.52%.The proposed methodology of surrogate-based optimisation will provide a platform for plant-level implementation to realise the concept of industry 4.0 in the refinery.展开更多
To enhance the rationality of the layout of electric vehicle charging stations,meet the actual needs of users,and optimise the service range and coverage efficiency of charging stations,this paper proposes an optimisa...To enhance the rationality of the layout of electric vehicle charging stations,meet the actual needs of users,and optimise the service range and coverage efficiency of charging stations,this paper proposes an optimisation strategy for the layout of electric vehicle charging stations that integrates Mini Batch K-Means and simulated annealing algorithms.By constructing a circle-like service area model with the charging station as the centre and a certain distance as the radius,the maximum coverage of electric vehicle charging stations in the region and the influence of different regional environments on charging demand are considered.Based on the real data of electric vehicle charging stations in Nanjing,Jiangsu Province,this paper uses the model proposed in this paper to optimise the layout of charging stations in the study area.The results show that the optimisation strategy incorporating Mini Batch K-Means and simulated annealing algorithms outperforms the existing charging station layouts in terms of coverage and the number of stations served,and compared to the original charging station layouts,the optimised charging station layouts have flatter Lorentzian curves and are closer to the average distribution.The proposed optimisation strategy not only improves the service efficiency and user satisfaction of EV(Electric Vehicle)charging stations but also provides a reference for the layout optimisation of EV charging stations in other cities,which has important practical value and promotion potential.展开更多
Zero-day attacks use unknown vulnerabilities that prevent being identified by cybersecurity detection tools.This study indicates that zero-day attacks have a significant impact on computer security.A conventional sign...Zero-day attacks use unknown vulnerabilities that prevent being identified by cybersecurity detection tools.This study indicates that zero-day attacks have a significant impact on computer security.A conventional signature-based detection algorithm is not efficient at recognizing zero-day attacks,as the signatures of zero-day attacks are usually not previously accessible.A machine learning(ML)-based detection algorithm is proficient in capturing statistical features of attacks and,therefore,optimistic for zero-day attack detection.ML and deep learning(DL)are employed for designing intrusion detection systems.The improvement of absolute varieties of novel cyberattacks poses significant challenges for IDS solutions that are dependent on datasets of prior signatures of the attacks.This manuscript presents the Zero-day attack detection employing an equilibrium optimizer with a deep learning(ZDAD-EODL)method to ensure cybersecurity.The ZDAD-EODL technique employs meta-heuristic feature subset selection using an optimum DL-based classification technique for zero-day attacks.Initially,the min-max scalar is utilized for normalizing the input data.For feature selection(FS),the ZDAD-EODL method utilizes the equilibrium optimizer(EO)model to choose feature sub-sets.In addition,the ZDAD-EODL technique employs the bi-directional gated recurrent unit(BiGRU)technique for the classification and identification of zero-day attacks.Finally,the detection performance of the BiGRU technique is further enhanced through the implementation of the subtraction average-based optimizer(SABO)-based tuning process.The performance of the ZDAD-EODL approach is investigated on the benchmark dataset.The comparison study of the ZDAD-EODL approach portrayed a superior accuracy value of 98.47%over existing techniques.展开更多
Power transformers are vital components in electric grids;however,methods to optimise their loading to extend lifespan while accounting for insulation degradation remain underdeveloped.This research paper introduces a...Power transformers are vital components in electric grids;however,methods to optimise their loading to extend lifespan while accounting for insulation degradation remain underdeveloped.This research paper introduces a novel integrated data-driven framework that combines particle filtering and model predictive health(PF-MPH)model for the predictive health manage-ment of power transformers.Initially,the particle filter probabilistically estimates power transformers'remaining life(R_(L))using direct winding hotspot temperature(χ_(H))measurements.The obtained R_(L)will then be used to calculate the degree of poly-merisation(DP)level and assess the current insulation condition.After that,a comparative analysis between direct and model-basedχ_(H)measurement methods is performed to highlight the superior accuracy of direct measurements for predictive health management.Then,the MPH optimisation algorithm,which uses the R_(L)and DP forecasts from the PF method,derives an optimal trajectory over the transformer's R_(L)that balances the costs of increased loading against the benefits gained from prolonged insulation longevity.The findings show that the proposed PF-MPH model has successfully reduced the χ_(H)by 2.46%over the predicted 19 years.This approach is expected to enable grid operators to optimise transformer loading schedules to extend the R_(L)of these critical assets in a cost-effective manner.展开更多
This paper presents the effect of mooring diameters, fairlead slopes and pretensions on the dynamic responses of a truss spar platform in intact and damaged line conditions. The platform is modelled as a rigid body wi...This paper presents the effect of mooring diameters, fairlead slopes and pretensions on the dynamic responses of a truss spar platform in intact and damaged line conditions. The platform is modelled as a rigid body with three degrees-of-freedom and its motions are analysed in time-domain using the implicit Newmark Beta technique. The mooring restoring force-excursion relationship is evaluated using quasi-static approach. MATLAB codes DATSpar and QSAML, are developed to compute the dynamic responses of truss spar platform and to determine the mooring system stiffness. To eliminate the conventional trial and error approach in the mooring system design, a numerical tool is also developed and described in this paper for optimising the mooring configuration. It has a graphical user interface and includes regrouping particle swarm optimisation technique combined with DATSpar and QSAML. A case study of truss spar platform with ten mooring lines is analysed using this numerical tool. The results show that optimum mooring system design benefits the oil and gas industry to economise the project cost in terms of material, weight, structural load onto the platform as well as manpower requirements. This tool is useful especially for the preliminary design of truss spar platforms and its mooring system.展开更多
Creep strength enhanced ferritic(CSEF) steels are used in advanced power plant systems for high temperature applications. P92(Cr–W–Mo–V)steel, classified under CSEF steels, is a candidate material for piping, tubin...Creep strength enhanced ferritic(CSEF) steels are used in advanced power plant systems for high temperature applications. P92(Cr–W–Mo–V)steel, classified under CSEF steels, is a candidate material for piping, tubing, etc., in ultra-super critical and advanced ultra-super critical boiler applications. In the present work, laser welding process has been optimised for P92 material by using Taguchi based grey relational analysis(GRA).Bead on plate(BOP) trials were carried out using a 3.5 k W diffusion cooled slab CO_2 laser by varying laser power, welding speed and focal position. The optimum parameters have been derived by considering the responses such as depth of penetration, weld width and heat affected zone(HAZ) width. Analysis of variance(ANOVA) has been used to analyse the effect of different parameters on the responses. Based on ANOVA, laser power of 3 k W, welding speed of 1 m/min and focal plane at-4 mm have evolved as optimised set of parameters. The responses of the optimised parameters obtained using the GRA have been verified experimentally and found to closely correlate with the predicted value.? 2016 China Ordnance Society. Production and hosting by Elsevier B.V. All rights reserved.展开更多
Self-piercing riveting(SPR)is a cold forming technique used to fasten together two or more sheets of materials with a rivet without the need to predrill a hole.The application of SPR in the automotive sector has becom...Self-piercing riveting(SPR)is a cold forming technique used to fasten together two or more sheets of materials with a rivet without the need to predrill a hole.The application of SPR in the automotive sector has become increasingly popular mainly due to the growing use of lightweight materials in transportation applications.However,SPR joining of these advanced light materials remains a challenge as these materials often lack a good combination of high strength and ductility to resist the large plastic deformation induced by the SPR process.In this paper,SPR joints of advanced materials and their corresponding failure mechanisms are discussed,aiming to provide the foundation for future improvement of SPR joint quality.This paper is divided into three major sections:1)joint failures focusing on joint defects originated from the SPR process and joint failure modes under different mechanical loading conditions,2)joint corrosion issues,and 3)joint optimisation via process parameters and advanced techniques.展开更多
This paper presents an optimisatiombased verification process for obstacle avoidance systems of a unicycle-like mobile robot. It is a novel approach for the collision avoidance verification process. Local and global o...This paper presents an optimisatiombased verification process for obstacle avoidance systems of a unicycle-like mobile robot. It is a novel approach for the collision avoidance verification process. Local and global optimisation based verification processes are developed to find the worst-case parameters and the worst-case distance between the robot and an obstacle. The kinematic and dynamic model of the unicycle-like mobile robot is first introduced with force and torque as the inputs. The design of the control system is split into two parts. One is velocity and rotation using the robot dynamics, and the other is the incremental motion planning for robot kinematics. The artificial potential field method is chosen as a path planning and obstacle avoidance candidate technique for verification study as it is simple and widely used. Different optimisation algorithms are applied and compared for the purpose of verification. It is shown that even for a simple case study where only mass and inertia variations are considered, a local optimization based verification method may fail to identify the worst case. Two global optimisation methods have been investigated： genetic algorithms （GAs） and GLOBAL algorithms. Both of these methods successfully find the worst case. The verification process confirms that the obstacle avoidance algorithm functions correctly in the presence of all the possible parameter variations.展开更多
In the present study, we developed a multi-component one-dimensional mathematical model for simulation and optimisation of a commercial catalytic slurry reactor for the direct synthesis of dimethyl ether （DME） from ...In the present study, we developed a multi-component one-dimensional mathematical model for simulation and optimisation of a commercial catalytic slurry reactor for the direct synthesis of dimethyl ether （DME） from syngas and CO2, operating in a churn-turbulent regime. DME productivity and CO conversion were optimised by tuning operating conditions, such as superficial gas velocity, catalyst concentration, catalyst mass over molar gas flow rate （W/F）, syngas composition, pressure and temperature. Reactor modelling was accomplished utilising mass balance, global kinetic models and heterogeneous hydrodynamics. In the heterogeneous flow regime, gas was distributed into two bubble phases： small and large. Simulation results were validated using data obtained from a pilot plant. The developed model is also applicable for the design of large-scale slurry reactors.展开更多
Computational fluid dynamics(CFD) simulation is an effective approach to develop and optimise gas drainage design for underground longwall coal mining. As part of the project supported by the Australian Government Coa...Computational fluid dynamics(CFD) simulation is an effective approach to develop and optimise gas drainage design for underground longwall coal mining. As part of the project supported by the Australian Government Coal Mining Abatement Technology Support Package(CMATSP), threedimensional CFD simulations were conducted to test and optimise a conceptual design which proposes using horizontal boreholes to replace vertical boreholes at an underground coal mine in Australia.Drainage performance between a vertical borehole and a horizontal borehole was first carried out to compare their capacity and effectiveness. Then a series of cases with different horizontal borehole designs were simulated to optimise borehole configuration parameters such as location, diameter, and number of boreholes. The study shows that the horizontal borehole is able to create low pressure sinks that protect the workings from goaf gas ingresses by changing goaf gas flow directions, and that it has the advantage to continuously maintain such low pressure sinks near the tailgate as the longwall advances. An example of optimising horizontal borehole locations in the longwall lateral direction is also given in this paper.展开更多
Two uncoupleable distributions, assigning missions to robots and allocating robots to home stations, accompany the use ofmobile service robots in hospitals.In the given problem, two workload-related objectives and fiv...Two uncoupleable distributions, assigning missions to robots and allocating robots to home stations, accompany the use ofmobile service robots in hospitals.In the given problem, two workload-related objectives and five groups of constraints areproposed.A bio-mimicked Binary Bees Algorithm (BBA) is introduced to solve this multiobjective multiconstraint combinatorialoptimisation problem, in which constraint handling technique (Multiobjective Transformation, MOT), multiobjectiveevaluation method (nondominance selection), global search strategy (stochastic search in the variable space), local searchstrategy (Hamming neighbourhood exploitation), and post-processing means (feasibility selection) are the main issues.TheBBA is then demonstrated with a case study, presenting the execution process of the algorithm, and also explaining the change ofelite number in evolutionary process.Its optimisation result provides a group of feasible nondominated two-level distributionschemes.展开更多
The optimisation of earthquake resistance of high buildings by multi-tuned mass dampers was investigated using bionic algorithms. In bionic or evolutionary optimisation studies the properties of parents are crossed an...The optimisation of earthquake resistance of high buildings by multi-tuned mass dampers was investigated using bionic algorithms. In bionic or evolutionary optimisation studies the properties of parents are crossed and mutated to produce a new generation with slightly different properties. The kids which best satisfy the object of the study, become the parents of the next generation. After a series of generations essential improvements of the object may be observed. Tuned mass dampers are widely used to reduce the impact of dynamic excitations on structures. A single mass system and multi-mass oscillators help to explain the mechanics of the dampers. To apply the bionic optimisation strategy to high buildings with passive tuned mass dampers subject to seismic loading a special beam element has been developed. In addition to the 6 degrees of freedom of a conventional beam element, it has 2 degrees of freedom for the displacements of the dampers. It allows for fast studies of many variants. As central result, efficient designs for damping systems along the height of an edifice are found. The impact on the structure may be reduced essentially by the use of such dampers designed to interact in an optimal way.展开更多
A general and new explicit isogeometric topology optimisation approach with moving morphable voids(MMV)is proposed.In this approach,a novel multiresolution scheme with two distinct discretisation levels is developed t...A general and new explicit isogeometric topology optimisation approach with moving morphable voids(MMV)is proposed.In this approach,a novel multiresolution scheme with two distinct discretisation levels is developed to obtain high-resolution designs with a relatively low computational cost.Ersatz material model based on Greville abscissae collocation scheme is utilised to represent both the Young’s modulus of the material and the density field.Two benchmark examples are tested to illustrate the effectiveness of the proposed method.Numerical results show that high-resolution designs can be obtained with relatively low computational cost,and the optimisation can be significantly improved without introducing additional DOFs.展开更多
文摘The highly efficient electrochemical treatment technology for dye-polluted wastewater is one of hot research topics in industrial wastewater treatment.This study reported a three-dimensional electrochemical treatment process integrating graphite intercalation compound(GIC)adsorption,direct anodic oxidation,and·OH oxidation for decolourising Reactive Black 5(RB5)from aqueous solutions.The electrochemical process was optimised using the novel progressive central composite design-response surface methodology(CCD-NPRSM),hybrid artificial neural network-extreme gradient boosting(hybrid ANN-XGBoost),and classification and regression trees(CART).CCD-NPRSM and hybrid ANN-XGBoost were employed to minimise errors in evaluating the electrochemical process involving three manipulated operational parameters:current density,electrolysis(treatment)time,and initial dye concentration.The optimised decolourisation efficiencies were 99.30%,96.63%,and 99.14%for CCD-NPRSM,hybrid ANN-XGBoost,and CART,respectively,compared to the 98.46%RB5 removal rate observed experimentally under optimum conditions:approximately 20 mA/cm^(2) of current density,20 min of electrolysis time,and 65 mg/L of RB5.The optimised mineralisation efficiencies ranged between 89%and 92%for different models based on total organic carbon(TOC).Experimental studies confirmed that the predictive efficiency of optimised models ranked in the descending order of hybrid ANN-XGBoost,CCD-NPRSM,and CART.Model validation using analysis of variance(ANOVA)revealed that hybrid ANN-XGBoost had a mean squared error(MSE)and a coefficient of determination(R^(2))of approximately 0.014 and 0.998,respectively,for the RB5 removal efficiency,outperforming CCD-NPRSM with MSE and R^(2) of 0.518 and 0.998,respectively.Overall,the hybrid ANN-XGBoost approach is the most feasible technique for assessing the electrochemical treatment efficiency in RB5 dye wastewater decolourisation.
文摘This paper presents an investigation of the tribological performance of AA2024–B_(4)C composites,with a specific focus on the influence of reinforcement and processing parameters.In this study three input parameters were varied:B_(4)C weight percentage,milling time,and normal load,to evaluate their effects on two output parameters:wear loss and the coefficient of friction.AA2024 alloy was used as the matrix alloy,while B_(4)C particles were used as reinforcement.Due to the high hardness and wear resistance of B_(4)C,the optimized composite shows strong potential for use in aerospace structural elements and automotive brake components.The optimisation of tribological behaviour was conducted using a Taguchi-Grey Relational Analysis(Taguchi-GRA)and the Technique for Order of Preference by Similarity to Ideal Solution(TOPSIS).A total of 27 combinations of input parameters were analysed,varying the B_(4)C content(0,10,and 15 wt.%),milling time(0,15,and 25 h),and normal load(1,5,and 10 N).Wear loss and the coefficient of friction were numerically evaluated and selected as criteria for optimisation.Artificial Neural Networks(ANNs)were also applied for two outputs simultaneously.TOPSIS identified Alternative 1 as the optimal solution,confirming the results obtained using the Taguchi Grey method.The optimal condition obtained(10 wt.%B_(4)C,25 h milling time,10 N load)resulted in a minimum wear loss of 1.7 mg and a coefficient of friction of 0.176,confirming significant enhancement in tribological behaviour.Based on the results,both the B_(4)C content and the applied processing conditions have a significant impact on wear loss and frictional properties.This approach demonstrates high reliability and confidence,enabling the design of future composite materials with optimal properties for specific applications.
基金supported by the National Key Research and Development Program of China (2022YFB3304700)Hunan Province Natural Science Foundation (2022JJ50132,2022JCYJ05 and 2022JCYJ09).
文摘Proportioning is an important part of sintering,as it affects the cost of sintering and the quality of sintered ore.To address the problems posed by the complex raw material information and numerous constraints in the sintering process,a multi-objective optimisation model for sintering proportioning was established,which takes the proportioning cost and TFe as the optimisation objectives.Additionally,an improved multi-objective beluga whale optimisation(IMOBWO)algorithm was proposed to solve the nonlinear,multi-constrained multi-objective optimisation problems.The algorithm uses the con-strained non-dominance criterion to deal with the constraint problem in the model.Moreover,the algorithm employs an opposite learning strategy and a population guidance mechanism based on angular competition and two-population competition strategy to enhance convergence and population diversity.The actual proportioning of a steel plant indicates that the IMOBWO algorithm applied to the ore proportioning process has good convergence and obtains the uniformly distributed Pareto front.Meanwhile,compared with the actual proportioning scheme,the proportioning cost is reduced by 4.3361¥/t,and the TFe content in the mixture is increased by 0.0367%in the optimal compromise solution.Therefore,the proposed method effectively balances the cost and total iron,facilitating the comprehensive utilisation of sintered iron ore resources while ensuring quality assurance.
文摘We evaluate an adaptive optimisation methodology,Bayesian optimisation(BO),for designing a minimum weight explosive reactive armour(ERA)for protection against a surrogate medium calibre kinetic energy(KE)long rod projectile and surrogate shaped charge(SC)warhead.We perform the optimisation using a conventional BO methodology and compare it with a conventional trial-and-error approach from a human expert.A third approach,utilising a novel human-machine teaming framework for BO is also evaluated.Data for the optimisation is generated using numerical simulations that are demonstrated to provide reasonable qualitative agreement with reference experiments.The human-machine teaming methodology is shown to identify the optimum ERA design in the fewest number of evaluations,outperforming both the stand-alone human and stand-alone BO methodologies.From a design space of almost 1800 configurations the human-machine teaming approach identifies the minimum weight ERA design in 10 samples.
基金supported in part by the National Natural Science Foundation of China (62376288,U23A20347)the Engineering and Physical Sciences Research Council of UK (EP/X041239/1)the Royal Society International Exchanges Scheme of UK (IEC/NSFC/211404)。
文摘Decomposition of a complex multi-objective optimisation problem(MOP)to multiple simple subMOPs,known as M2M for short,is an effective approach to multi-objective optimisation.However,M2M facilitates little communication/collaboration between subMOPs,which limits its use in complex optimisation scenarios.This paper extends the M2M framework to develop a unified algorithm for both multi-objective and manyobjective optimisation.Through bilevel decomposition,an MOP is divided into multiple subMOPs at upper level,each of which is further divided into a number of single-objective subproblems at lower level.Neighbouring subMOPs are allowed to share some subproblems so that the knowledge gained from solving one subMOP can be transferred to another,and eventually to all the subMOPs.The bilevel decomposition is readily combined with some new mating selection and population update strategies,leading to a high-performance algorithm that competes effectively against a number of state-of-the-arts studied in this paper for both multiand many-objective optimisation.Parameter analysis and component analysis have been also carried out to further justify the proposed algorithm.
文摘In real-world applications, datasets frequently contain outliers, which can hinder the generalization ability of machine learning models. Bayesian classifiers, a popular supervised learning method, rely on accurate probability density estimation for classifying continuous datasets. However, achieving precise density estimation with datasets containing outliers poses a significant challenge. This paper introduces a Bayesian classifier that utilizes optimized robust kernel density estimation to address this issue. Our proposed method enhances the accuracy of probability density distribution estimation by mitigating the impact of outliers on the training sample’s estimated distribution. Unlike the conventional kernel density estimator, our robust estimator can be seen as a weighted kernel mapping summary for each sample. This kernel mapping performs the inner product in the Hilbert space, allowing the kernel density estimation to be considered the average of the samples’ mapping in the Hilbert space using a reproducing kernel. M-estimation techniques are used to obtain accurate mean values and solve the weights. Meanwhile, complete cross-validation is used as the objective function to search for the optimal bandwidth, which impacts the estimator. The Harris Hawks Optimisation optimizes the objective function to improve the estimation accuracy. The experimental results show that it outperforms other optimization algorithms regarding convergence speed and objective function value during the bandwidth search. The optimal robust kernel density estimator achieves better fitness performance than the traditional kernel density estimator when the training data contains outliers. The Naïve Bayesian with optimal robust kernel density estimation improves the generalization in the classification with outliers.
文摘Cloud computing has rapidly evolved into a critical technology,seamlessly integrating into various aspects of daily life.As user demand for cloud services continues to surge,the need for efficient virtualization and resource management becomes paramount.At the core of this efficiency lies task scheduling,a complex process that determines how tasks are allocated and executed across cloud resources.While extensive research has been conducted in the area of task scheduling,optimizing multiple objectives simultaneously remains a significant challenge due to the NP(Non-deterministic Polynomial)Complete nature of the problem.This study aims to address these challenges by providing a comprehensive review and experimental analysis of task scheduling approaches,with a particular focus on hybrid techniques that offer promising solutions.Utilizing the CloudSim simulation toolkit,we evaluated the performance of three hybrid algorithms:Estimation of Distribution Algorithm-Genetic Algorithm(EDA-GA),Hybrid Genetic Algorithm-Ant Colony Optimization(HGA-ACO),and Improved Discrete Particle Swarm Optimization(IDPSO).Our experimental results demonstrate that these hybrid methods significantly outperform traditional standalone algorithms in reducing Makespan,which is a critical measure of task completion time.Notably,the IDPSO algorithm exhibited superior performance,achieving a Makespan of just 0.64 milliseconds for a set of 150 tasks.These findings underscore the potential of hybrid algorithms to enhance task scheduling efficiency in cloud computing environments.This paper concludes with a discussion of the implications of our findings and offers recommendations for future research aimed at further improving task scheduling strategies,particularly in the context of increasingly complex and dynamic cloud environments.
基金Higher Education Commission(HEC),Pakistan,under the National Research Program for Universities(NRPU)Project No.10,215/Federal.
文摘Hardware-based sensing frameworks such as cooperative fuel research engines are conventionally used to monitor research octane number(RON)in the petroleum refining industry.Machine learning techniques are employed to predict the RON of integrated naphtha reforming and isomerisation processes.A dynamic Aspen HYSYS model was used to generate data by introducing artificial uncertainties in the range of±5%in process conditions,such as temperature,flow rates,etc.The generated data was used to train support vector machines(SVM),Gaussian process regression(GPR),artificial neural networks(ANN),regression trees(RT),and ensemble trees(ET).Hyperparameter tuning was performed to enhance the prediction capabilities of GPR,ANN,SVM,ET and RT models.Performance analysis of the models indicates that GPR,ANN,and SVM with R2 values of 0.99,0.978,and 0.979 and RMSE values of 0.108,0.262,and 0.258,respectively performed better than the remaining models and had the prediction capability to capture the RON dependence on predictor variables.ET and RT had an R2 value of 0.94 and 0.89,respectively.The GPR model was used as a surrogate model for fitness function evaluations in two optimisation frameworks based on genetic algorithm and particle swarm method.Optimal parameter values found by the optimisation methodology increased the RON value by 3.52%.The proposed methodology of surrogate-based optimisation will provide a platform for plant-level implementation to realise the concept of industry 4.0 in the refinery.
基金supported by the Jiangsu Provincial College Students Innovation andEntrepreneurship Training Plan Project(grant number 202411276037Z)the Nanjing Institute ofTechnology Fund for Research Startup Projects of Introduced Talents(grant number TB202406012).
文摘To enhance the rationality of the layout of electric vehicle charging stations,meet the actual needs of users,and optimise the service range and coverage efficiency of charging stations,this paper proposes an optimisation strategy for the layout of electric vehicle charging stations that integrates Mini Batch K-Means and simulated annealing algorithms.By constructing a circle-like service area model with the charging station as the centre and a certain distance as the radius,the maximum coverage of electric vehicle charging stations in the region and the influence of different regional environments on charging demand are considered.Based on the real data of electric vehicle charging stations in Nanjing,Jiangsu Province,this paper uses the model proposed in this paper to optimise the layout of charging stations in the study area.The results show that the optimisation strategy incorporating Mini Batch K-Means and simulated annealing algorithms outperforms the existing charging station layouts in terms of coverage and the number of stations served,and compared to the original charging station layouts,the optimised charging station layouts have flatter Lorentzian curves and are closer to the average distribution.The proposed optimisation strategy not only improves the service efficiency and user satisfaction of EV(Electric Vehicle)charging stations but also provides a reference for the layout optimisation of EV charging stations in other cities,which has important practical value and promotion potential.
基金Deanship of Research and Graduate Studies at King Khalid University for funding this work through Large Research Project under grant number RGP2/286/46Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R732),Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia+2 种基金Ongoing Research Funding program(ORFFT-2025-100-7),King Saud University,Riyadh,Saudi Arabia for financial supportthe Deanship of Scientific Research at Northern Border University,Arar,Saudi Arabia,for funding this research work through the project number“NBU-FFR-2025-2913-07”the Deanship of Graduate Studies and Scientific Research at the University of Bisha for supporting this work through the Fast-Track Research Support Program。
文摘Zero-day attacks use unknown vulnerabilities that prevent being identified by cybersecurity detection tools.This study indicates that zero-day attacks have a significant impact on computer security.A conventional signature-based detection algorithm is not efficient at recognizing zero-day attacks,as the signatures of zero-day attacks are usually not previously accessible.A machine learning(ML)-based detection algorithm is proficient in capturing statistical features of attacks and,therefore,optimistic for zero-day attack detection.ML and deep learning(DL)are employed for designing intrusion detection systems.The improvement of absolute varieties of novel cyberattacks poses significant challenges for IDS solutions that are dependent on datasets of prior signatures of the attacks.This manuscript presents the Zero-day attack detection employing an equilibrium optimizer with a deep learning(ZDAD-EODL)method to ensure cybersecurity.The ZDAD-EODL technique employs meta-heuristic feature subset selection using an optimum DL-based classification technique for zero-day attacks.Initially,the min-max scalar is utilized for normalizing the input data.For feature selection(FS),the ZDAD-EODL method utilizes the equilibrium optimizer(EO)model to choose feature sub-sets.In addition,the ZDAD-EODL technique employs the bi-directional gated recurrent unit(BiGRU)technique for the classification and identification of zero-day attacks.Finally,the detection performance of the BiGRU technique is further enhanced through the implementation of the subtraction average-based optimizer(SABO)-based tuning process.The performance of the ZDAD-EODL approach is investigated on the benchmark dataset.The comparison study of the ZDAD-EODL approach portrayed a superior accuracy value of 98.47%over existing techniques.
基金supported by Shandong Provincial Natural Science Foundation(ZR2024ME229,ZR2024ZD29).
文摘Power transformers are vital components in electric grids;however,methods to optimise their loading to extend lifespan while accounting for insulation degradation remain underdeveloped.This research paper introduces a novel integrated data-driven framework that combines particle filtering and model predictive health(PF-MPH)model for the predictive health manage-ment of power transformers.Initially,the particle filter probabilistically estimates power transformers'remaining life(R_(L))using direct winding hotspot temperature(χ_(H))measurements.The obtained R_(L)will then be used to calculate the degree of poly-merisation(DP)level and assess the current insulation condition.After that,a comparative analysis between direct and model-basedχ_(H)measurement methods is performed to highlight the superior accuracy of direct measurements for predictive health management.Then,the MPH optimisation algorithm,which uses the R_(L)and DP forecasts from the PF method,derives an optimal trajectory over the transformer's R_(L)that balances the costs of increased loading against the benefits gained from prolonged insulation longevity.The findings show that the proposed PF-MPH model has successfully reduced the χ_(H)by 2.46%over the predicted 19 years.This approach is expected to enable grid operators to optimise transformer loading schedules to extend the R_(L)of these critical assets in a cost-effective manner.
基金partially supported by YUTP-FRG funded by PETRONAS
文摘This paper presents the effect of mooring diameters, fairlead slopes and pretensions on the dynamic responses of a truss spar platform in intact and damaged line conditions. The platform is modelled as a rigid body with three degrees-of-freedom and its motions are analysed in time-domain using the implicit Newmark Beta technique. The mooring restoring force-excursion relationship is evaluated using quasi-static approach. MATLAB codes DATSpar and QSAML, are developed to compute the dynamic responses of truss spar platform and to determine the mooring system stiffness. To eliminate the conventional trial and error approach in the mooring system design, a numerical tool is also developed and described in this paper for optimising the mooring configuration. It has a graphical user interface and includes regrouping particle swarm optimisation technique combined with DATSpar and QSAML. A case study of truss spar platform with ten mooring lines is analysed using this numerical tool. The results show that optimum mooring system design benefits the oil and gas industry to economise the project cost in terms of material, weight, structural load onto the platform as well as manpower requirements. This tool is useful especially for the preliminary design of truss spar platforms and its mooring system.
基金the management of Bharat Heavy Electricals Ltd., for funding this research programme
文摘Creep strength enhanced ferritic(CSEF) steels are used in advanced power plant systems for high temperature applications. P92(Cr–W–Mo–V)steel, classified under CSEF steels, is a candidate material for piping, tubing, etc., in ultra-super critical and advanced ultra-super critical boiler applications. In the present work, laser welding process has been optimised for P92 material by using Taguchi based grey relational analysis(GRA).Bead on plate(BOP) trials were carried out using a 3.5 k W diffusion cooled slab CO_2 laser by varying laser power, welding speed and focal position. The optimum parameters have been derived by considering the responses such as depth of penetration, weld width and heat affected zone(HAZ) width. Analysis of variance(ANOVA) has been used to analyse the effect of different parameters on the responses. Based on ANOVA, laser power of 3 k W, welding speed of 1 m/min and focal plane at-4 mm have evolved as optimised set of parameters. The responses of the optimised parameters obtained using the GRA have been verified experimentally and found to closely correlate with the predicted value.? 2016 China Ordnance Society. Production and hosting by Elsevier B.V. All rights reserved.
文摘Self-piercing riveting(SPR)is a cold forming technique used to fasten together two or more sheets of materials with a rivet without the need to predrill a hole.The application of SPR in the automotive sector has become increasingly popular mainly due to the growing use of lightweight materials in transportation applications.However,SPR joining of these advanced light materials remains a challenge as these materials often lack a good combination of high strength and ductility to resist the large plastic deformation induced by the SPR process.In this paper,SPR joints of advanced materials and their corresponding failure mechanisms are discussed,aiming to provide the foundation for future improvement of SPR joint quality.This paper is divided into three major sections:1)joint failures focusing on joint defects originated from the SPR process and joint failure modes under different mechanical loading conditions,2)joint corrosion issues,and 3)joint optimisation via process parameters and advanced techniques.
文摘This paper presents an optimisatiombased verification process for obstacle avoidance systems of a unicycle-like mobile robot. It is a novel approach for the collision avoidance verification process. Local and global optimisation based verification processes are developed to find the worst-case parameters and the worst-case distance between the robot and an obstacle. The kinematic and dynamic model of the unicycle-like mobile robot is first introduced with force and torque as the inputs. The design of the control system is split into two parts. One is velocity and rotation using the robot dynamics, and the other is the incremental motion planning for robot kinematics. The artificial potential field method is chosen as a path planning and obstacle avoidance candidate technique for verification study as it is simple and widely used. Different optimisation algorithms are applied and compared for the purpose of verification. It is shown that even for a simple case study where only mass and inertia variations are considered, a local optimization based verification method may fail to identify the worst case. Two global optimisation methods have been investigated： genetic algorithms （GAs） and GLOBAL algorithms. Both of these methods successfully find the worst case. The verification process confirms that the obstacle avoidance algorithm functions correctly in the presence of all the possible parameter variations.
文摘In the present study, we developed a multi-component one-dimensional mathematical model for simulation and optimisation of a commercial catalytic slurry reactor for the direct synthesis of dimethyl ether （DME） from syngas and CO2, operating in a churn-turbulent regime. DME productivity and CO conversion were optimised by tuning operating conditions, such as superficial gas velocity, catalyst concentration, catalyst mass over molar gas flow rate （W/F）, syngas composition, pressure and temperature. Reactor modelling was accomplished utilising mass balance, global kinetic models and heterogeneous hydrodynamics. In the heterogeneous flow regime, gas was distributed into two bubble phases： small and large. Simulation results were validated using data obtained from a pilot plant. The developed model is also applicable for the design of large-scale slurry reactors.
基金the Department of Industry and Science,Australian Government for funding this researchthe management and staff of Glencore Bulga Underground Operations for their significant contributions in this project
文摘Computational fluid dynamics(CFD) simulation is an effective approach to develop and optimise gas drainage design for underground longwall coal mining. As part of the project supported by the Australian Government Coal Mining Abatement Technology Support Package(CMATSP), threedimensional CFD simulations were conducted to test and optimise a conceptual design which proposes using horizontal boreholes to replace vertical boreholes at an underground coal mine in Australia.Drainage performance between a vertical borehole and a horizontal borehole was first carried out to compare their capacity and effectiveness. Then a series of cases with different horizontal borehole designs were simulated to optimise borehole configuration parameters such as location, diameter, and number of boreholes. The study shows that the horizontal borehole is able to create low pressure sinks that protect the workings from goaf gas ingresses by changing goaf gas flow directions, and that it has the advantage to continuously maintain such low pressure sinks near the tailgate as the longwall advances. An example of optimising horizontal borehole locations in the longwall lateral direction is also given in this paper.
文摘Two uncoupleable distributions, assigning missions to robots and allocating robots to home stations, accompany the use ofmobile service robots in hospitals.In the given problem, two workload-related objectives and five groups of constraints areproposed.A bio-mimicked Binary Bees Algorithm (BBA) is introduced to solve this multiobjective multiconstraint combinatorialoptimisation problem, in which constraint handling technique (Multiobjective Transformation, MOT), multiobjectiveevaluation method (nondominance selection), global search strategy (stochastic search in the variable space), local searchstrategy (Hamming neighbourhood exploitation), and post-processing means (feasibility selection) are the main issues.TheBBA is then demonstrated with a case study, presenting the execution process of the algorithm, and also explaining the change ofelite number in evolutionary process.Its optimisation result provides a group of feasible nondominated two-level distributionschemes.
文摘The optimisation of earthquake resistance of high buildings by multi-tuned mass dampers was investigated using bionic algorithms. In bionic or evolutionary optimisation studies the properties of parents are crossed and mutated to produce a new generation with slightly different properties. The kids which best satisfy the object of the study, become the parents of the next generation. After a series of generations essential improvements of the object may be observed. Tuned mass dampers are widely used to reduce the impact of dynamic excitations on structures. A single mass system and multi-mass oscillators help to explain the mechanics of the dampers. To apply the bionic optimisation strategy to high buildings with passive tuned mass dampers subject to seismic loading a special beam element has been developed. In addition to the 6 degrees of freedom of a conventional beam element, it has 2 degrees of freedom for the displacements of the dampers. It allows for fast studies of many variants. As central result, efficient designs for damping systems along the height of an edifice are found. The impact on the structure may be reduced essentially by the use of such dampers designed to interact in an optimal way.
基金National Natural Science Foundation of China under Grant Nos.51675525 and 11725211.
文摘A general and new explicit isogeometric topology optimisation approach with moving morphable voids(MMV)is proposed.In this approach,a novel multiresolution scheme with two distinct discretisation levels is developed to obtain high-resolution designs with a relatively low computational cost.Ersatz material model based on Greville abscissae collocation scheme is utilised to represent both the Young’s modulus of the material and the density field.Two benchmark examples are tested to illustrate the effectiveness of the proposed method.Numerical results show that high-resolution designs can be obtained with relatively low computational cost,and the optimisation can be significantly improved without introducing additional DOFs.
