RNAs have important biological functions and the functions of RNAs are generally coupled to their structures, especiallytheir secondary structures. In this work, we have made a comprehensive evaluation of the performa...RNAs have important biological functions and the functions of RNAs are generally coupled to their structures, especiallytheir secondary structures. In this work, we have made a comprehensive evaluation of the performances of existingtop RNA secondary structure prediction methods, including five deep-learning (DL) based methods and five minimum freeenergy (MFE) based methods. First, we made a brief overview of these RNA secondary structure prediction methods.Afterwards, we built two rigorous test datasets consisting of RNAs with non-redundant sequences and comprehensivelyexamined the performances of the RNA secondary structure prediction methods through classifying the RNAs into differentlength ranges and different types. Our examination shows that the DL-based methods generally perform better thanthe MFE-based methods for RNAs with long lengths and complex structures, while the MFE-based methods can achievegood performance for small RNAs and some specialized MFE-based methods can achieve good prediction accuracy forpseudoknots. Finally, we provided some insights and perspectives in modeling RNA secondary structures.展开更多
To tackle the difficulties of the point prediction in quantifying the reliability of landslide displacement prediction,a data-driven combination-interval prediction method(CIPM)based on copula and variational-mode-dec...To tackle the difficulties of the point prediction in quantifying the reliability of landslide displacement prediction,a data-driven combination-interval prediction method(CIPM)based on copula and variational-mode-decomposition associated with kernel-based-extreme-learningmachine optimized by the whale optimization algorithm(VMD-WOA-KELM)is proposed in this paper.Firstly,the displacement is decomposed by VMD to three IMF components and a residual component of different fluctuation characteristics.The key impact factors of each IMF component are selected according to Copula model,and the corresponding WOA-KELM is established to conduct point prediction.Subsequently,the parametric method(PM)and non-parametric method(NPM)are used to estimate the prediction error probability density distribution(PDF)of each component,whose prediction interval(PI)under the 95%confidence level is also obtained.By means of the differential evolution algorithm(DE),a weighted combination model based on the PIs is built to construct the combination-interval(CI).Finally,the CIs of each component are added to generate the total PI.A comparative case study shows that the CIPM performs better in constructing landslide displacement PI with high performance.展开更多
Wellbore instability is one of the significant challenges in the drilling engineering and during the development of carbonate reservoirs,especially with open-hole completion.The problems of wellbore instability such a...Wellbore instability is one of the significant challenges in the drilling engineering and during the development of carbonate reservoirs,especially with open-hole completion.The problems of wellbore instability such as downhole collapse and silt deposit in the fractured carbonate reservoir of Tarim Basin(Ordovician)are severe.Solid destabilization and production(SDP)was proposed to describe this engineering problem of carbonate reservoirs.To clarify the mechanism and mitigate potential borehole instability problems,we conducted particle size distribution(PSD)analysis,X-ray diffraction(XRD)analysis,triaxial compression tests,and micro-scale sand production tests based on data analysis.We found that the rock fragments and silt in the wellbore came from two sources:one from the wellbore collapse in the upper unplugged layers and the other from the production of sand particles carried by the fluid in the productive layers.Based on the experimental study,a novel method combining a geomechanical model and microscopic sand production model was proposed to predict wellbore instability and analyze its influencing factors.The critical condition and failure zone predicted by the prediction model fit well with the field observations.According to the prediction results,the management and prevention measures of wellbore instability in carbonate reservoirs were proposed.It is suggested to optimize the well track in new drilling wells while upgrading the production system in old wells.This study is of great guiding significance for the optimization of carbonate solid control and it improves the understanding of the sand production problems in carbonate reservoirs.展开更多
Accurate prediction of coal and gas outburst(CGO)hazards is paramount in gas disaster prevention and control.This paper endeavors to overcome the constraints posed by traditional prediction indexes when dealing with C...Accurate prediction of coal and gas outburst(CGO)hazards is paramount in gas disaster prevention and control.This paper endeavors to overcome the constraints posed by traditional prediction indexes when dealing with CGO incidents under low gas pressure conditions.In pursuit of this objective,we have studied and established a mechanical model of the working face under abnormal stress and the excitation energy conditions of CGO,and proposed a method for predicting the risk of CGO under abnormal stress.On site application verification shows that when a strong outburst hazard level prediction is issued,there is a high possibility of outburst disasters occurring.In one of the three locations where we predicted strong outburst hazards,a small outburst occurred,and the accuracy of the prediction was higher than the traditional drilling cuttings index S and drilling cuttings gas desorption index q.Finally,we discuss the mechanism of CGO under the action of stress anomalies.Based on the analysis of stress distribution changes and energy accumulation characteristics of coal under abnormal stress,this article believes that the increase in outburst risk caused by high stress abnormal gradient is mainly due to two reasons:(1)The high stress abnormal gradient leads to an increase in the plastic zone of the coal seam.After the working face advances,it indirectly leads to an increase in the gas expansion energy that can be released from the coal seam before reaching a new stress equilibrium.(2)Abnormal stress leads to increased peak stress of coal body in front of working face.When coal body in elastic area transforms to plastic area,its failure speed is accelerated,which induces accelerated gas desorption and aggravates the risk of outburst.展开更多
The mathematical method of ZTD(zenith tropospheric delay)spatial prediction is important for precise ZTD derivation and real-time precise point positioning(PPP)augmentation.This paper analyses the performance of the p...The mathematical method of ZTD(zenith tropospheric delay)spatial prediction is important for precise ZTD derivation and real-time precise point positioning(PPP)augmentation.This paper analyses the performance of the popular optimal function coefficient(OFC),sphere cap harmonic analysis(SCHA),kriging and inverse distance weighting(IDW)interpolation in ZTD spatial prediction and Beidou satellite navigation system(BDS)-PPP augmentation over China.For ZTD spatial prediction,the average time consumption of the OFC,kriging,and IDW methods is less than 0.1 s,which is significantly better than that of the SCHA method(63.157 s).The overall ZTD precision of the OFC is 3.44 cm,which outperforms those of the SCHA(9.65 cm),Kriging(10.6 cm),and IDW(11.8 cm)methods.We confirmed that the low performance of kriging and IDW is caused by their weakness in modelling ZTD variation in the vertical direction.To mitigate such deficiencies,an elevation normalization factor(ENF)is introduced into the kriging and IDW models(kriging-ENF and IDW-ENF).The overall ZTD spatial prediction accuracies of IDW-ENF and kriging-ENF are 2.80 cm and 2.01 cm,respectively,which are both superior to those of the OFC and the widely used empirical model GPT3(4.92 cm).For BDS-PPP enhancement,the ZTD provided by the kriging-ENF,IDW-ENF and OFC as prior constraints can effectively reduce the convergence time.Compared with unconstrained BDS-PPP,our proposed kriging-ENF outperforms IDW-ENF and OFC by reducing the horizontal and vertical convergence times by approximately 13.2%and 5.8%in Ningxia and 30.4%and 7.84%in Guangdong,respectively.These results indicate that kriging-ENF is a promising method for ZTD spatial prediction and BDS-PPP enhancement over China.展开更多
In the existing landslide susceptibility prediction(LSP)models,the influences of random errors in landslide conditioning factors on LSP are not considered,instead the original conditioning factors are directly taken a...In the existing landslide susceptibility prediction(LSP)models,the influences of random errors in landslide conditioning factors on LSP are not considered,instead the original conditioning factors are directly taken as the model inputs,which brings uncertainties to LSP results.This study aims to reveal the influence rules of the different proportional random errors in conditioning factors on the LSP un-certainties,and further explore a method which can effectively reduce the random errors in conditioning factors.The original conditioning factors are firstly used to construct original factors-based LSP models,and then different random errors of 5%,10%,15% and 20%are added to these original factors for con-structing relevant errors-based LSP models.Secondly,low-pass filter-based LSP models are constructed by eliminating the random errors using low-pass filter method.Thirdly,the Ruijin County of China with 370 landslides and 16 conditioning factors are used as study case.Three typical machine learning models,i.e.multilayer perceptron(MLP),support vector machine(SVM)and random forest(RF),are selected as LSP models.Finally,the LSP uncertainties are discussed and results show that:(1)The low-pass filter can effectively reduce the random errors in conditioning factors to decrease the LSP uncertainties.(2)With the proportions of random errors increasing from 5%to 20%,the LSP uncertainty increases continuously.(3)The original factors-based models are feasible for LSP in the absence of more accurate conditioning factors.(4)The influence degrees of two uncertainty issues,machine learning models and different proportions of random errors,on the LSP modeling are large and basically the same.(5)The Shapley values effectively explain the internal mechanism of machine learning model predicting landslide sus-ceptibility.In conclusion,greater proportion of random errors in conditioning factors results in higher LSP uncertainty,and low-pass filter can effectively reduce these random errors.展开更多
Aiming at the problem of insufficient prediction accuracy of strip flatness at the outlet of cold tandem rolling,the prediction performance of strip flatness based on different ensemble methods was studied and a high-...Aiming at the problem of insufficient prediction accuracy of strip flatness at the outlet of cold tandem rolling,the prediction performance of strip flatness based on different ensemble methods was studied and a high-precision prediction ensemble model of strip flatness at the outlet was established.Firstly,based on linear regression(LR),K nearest neighbors(KNN),support vector regression,regression trees(RT),and backpropagation neural network(BPN),bagging,boosting,and stacking ensemble methods were used for ensemble experiments.Secondly,three existing ensemble models,i.e.,random forest,extreme random tree(ET)and extreme gradient boosting,were used to conduct experiments and compare the results.The research shows that bagging,boosting,and stacking three ensemble methods have the most significant improvement in the prediction accuracy of the regression trees model,which is increased by 5.28%,6.51%,and 5.32%,respectively.At the same time,the stacking ensemble method improves both the simple model and the complex model,and the improvement effect on the simple base model is the greatest,which is 4.69%higher than that of the base model KNN.Comparing all of the ensemble models,the stacking ensemble model of level-1(ET,AdaBoost-RT,LR,BPN)paired with level-2(LR)was discovered to be the best model(EALB-LR)and can be further studied for industrial applications.展开更多
A two-stage hybrid method is proposed to predict the phosphorus content of molten steel at the endpoint of steelmaking in BOF(Basic Oxygen Furnace). At the first clustering stage, the weighted K-means is performed to ...A two-stage hybrid method is proposed to predict the phosphorus content of molten steel at the endpoint of steelmaking in BOF(Basic Oxygen Furnace). At the first clustering stage, the weighted K-means is performed to produce clusters with homogeneous data. At the second predicting stage, each fuzzy neural network is carried out on each cluster and the results from all fuzzy neural networks are combined to be the final result of the hybrid method. The hybrid method and single fuzzy neural network are compared and the results show that the hybrid method outperforms single fuzzy neural network.展开更多
Objective：To investigate the reliability for kinetic assay of substance with background predicted by the integrated method using uricase reaction as model. Methods： Absorbance before uricase action （Δ0） was estim...Objective：To investigate the reliability for kinetic assay of substance with background predicted by the integrated method using uricase reaction as model. Methods： Absorbance before uricase action （Δ0） was estimated by extrapolation with given lag time of steady-state reaction. With Km fixed at 12.5μmol/L, background absorbance （Δb） was predicted by nonlinearly fitting integrated Michaelis-Menten equation to Candida utilis uricase reaction curve. Uric acid in reaction solution was determined by the difference （ΔA） between Δ0 and Δb. Results .Ab usually showed deviation 〈3% from direct assay with residual substrate done fifth of initial substrate for analysis. ΔA showed CV 〈5% with resistance to common interferences except xanthine, and it linearly responded to uric acid with slope consistent to the absorptivity of uric acid. The lower limit was 2.0 μmol/L and upper limit reached 30 μmol/L in reaction solution with data monitored within 8 min reaction at 0. 015 U/ml uricase. Preliminary application to serum and urine gave better precision than the direct equilibrium method without the removal of proteins before analysis. Conclusion .This kinetic method with background predicted by the integrated method was reliable for enzymatic analysis, and it showed resistance to common interferences and enhanced efficiency at much lower cost.展开更多
Prediction of surface subsidence caused by longwall mining operation in inclined coal seams is often very challenging. The existing empirical prediction methods are inflexible for varying geological and mining conditi...Prediction of surface subsidence caused by longwall mining operation in inclined coal seams is often very challenging. The existing empirical prediction methods are inflexible for varying geological and mining conditions. An improved influence function method has been developed to take the advantage of its fundamentally sound nature and flexibility. In developing this method, the original Knothe function has been transformed to produce a continuous and asymmetrical subsidence influence function. The empirical equations for final subsidence parameters derived from col- lected longwall subsidence data have been incorporated into the mathematical models to improve the prediction accuracy. A number of demonstration cases for longwall mining operations in coal seams with varying inclination angles, depths and panel widths have been used to verify the applicability of the new subsidence prediction model.展开更多
In the process of using the original key stratum theory to predict the height of a water-flowing fractured zone(WFZ),the influence of rock strata outside the calculation range on the rock strata within the calculation...In the process of using the original key stratum theory to predict the height of a water-flowing fractured zone(WFZ),the influence of rock strata outside the calculation range on the rock strata within the calculation range as well as the fact that the shape of the overburden deformation area will change with the excavation length are ignored.In this paper,an improved key stratum theory(IKS theory)was proposed by fixing these two shortcomings.Then,a WFZ height prediction method based on IKS theory was established and applied.First,the range of overburden involved in the analysis was determined according to the tensile stress distribution range above the goaf.Second,the key stratum in the overburden involved in the analysis was identified through IKS theory.Finally,the tendency of the WFZ to develop upward was determined by judging whether or not the identified key stratum will break.The proposed method was applied and verified in a mining case study,and the reasons for the differences in the development patterns between the WFZs in coalfields in Northwest and East China were also fully explained by this method.展开更多
Thin-walled torispherical heads under internal pressure can fail by plastic buckling because of compressive circumferential stresses in the head knuckle.However,existing formulas still have limitations,such as complic...Thin-walled torispherical heads under internal pressure can fail by plastic buckling because of compressive circumferential stresses in the head knuckle.However,existing formulas still have limitations,such as complicated expressions and low accuracy,in determining buckling pressure.In this paper,we propose a new formula for calculating the buckling pressure of torispherical heads based on elastic-plastic analysis and experimental results.First,a finite element(FE)method based on the arc-length method is established to calculate the plastic buckling pressure of torispherical heads,considering the effects of material strain hardening and geometrical nonlinearity.The buckling pressure results calculated by the FE method in this paper have good consistency with those of BOSOR5,which is a program for calculating the elastic-plastic bifurcation buckling pressure based on the finite difference energy method.Second,the effects of geometric parameters,material parameters,and restraint form of head edge on buckling pressure are investigated.Third,a new formula for calculating plastic buckling pressure is developed by fitting the curve of FE results and introducing a reduction factor determined from experimental data.Finally,based on the experimental results,we compare the predictions of the new formula with those of existing formulas.It is shown that the new formula has a higher accuracy than the existing ones.展开更多
The sea surface temperature （SST） in the In- dian Ocean affects the regional climate over the Asian continent mostly through a modulation of the monsoon system. It is still difficult to provide an a priori indicatio...The sea surface temperature （SST） in the In- dian Ocean affects the regional climate over the Asian continent mostly through a modulation of the monsoon system. It is still difficult to provide an a priori indication of the seasonal variability over the Indian Ocean. It is widely recognized that the warm and cold events of SST over the tropical Indian Ocean are strongly linked to those of the equatorial eastern Pacific. In this study, a statistical prediction model has been developed to predict the monthly SST over the tropical Indian Ocean. This model is a linear regression model based on the lag relationship between the SST over the tropical Indian Ocean and the Nino3.4 （5°S-5°N, 170°W-120°W） SST Index. The pre- dictor （i.e., Nino3.4 SST Index） has been operationally predicted by a large size ensemble E1 Nifio and the Southern Oscillation （ENSO） forecast system with cou- pled data assimilation （Leefs_CDA）, which achieves a high predictive skill of up to a 24-month lead time for the equatorial eastern Pacific SST. As a result, the prediction skill of the present statistical model over the tropical In- dian Ocean is better than that of persistence prediction for January 1982 through December 2009.展开更多
Dimensional analysis and numerical simulations were carried out to research prediction method of breakthrough time of horizontal wells in bottom water reservoir. Four dimensionless independent variables and dimensionl...Dimensional analysis and numerical simulations were carried out to research prediction method of breakthrough time of horizontal wells in bottom water reservoir. Four dimensionless independent variables and dimensionless time were derived from 10 influencing factors of the problem by using dimensional analysis. Simulations of horizontal well in reservoir with bottom water were run to find the prediction correlation. A general and concise functional relationship for predicting breakthrough time was established based on simulation results and theoretical analysis. The breakthrough time of one conceptual model predicted by the correlation is very close to the result by Eclipse with less than 2% error. The practical breakthrough time of one well in Helder oilfield is 10 d, and the predicted results by the method is 11.2 d, which is more accurate than the analytical result. Case study indicates that the method could predict breakthrough time of horizontal well under different reservoir conditions accurately. For its university and ease of use, the method is suitable for quick prediction of breakthrough time.展开更多
It is a significant task to predict the solar activity for space weather and solar physics. All kinds of approaches have been used to forecast solar activities, and they have been applied to many areas such as the sol...It is a significant task to predict the solar activity for space weather and solar physics. All kinds of approaches have been used to forecast solar activities, and they have been applied to many areas such as the solar dynamo of simulation and space mission planning. In this paper, we employ the long-shortterm memory(LSTM) and neural network autoregression(NNAR) deep learning methods to predict the upcoming 25 th solar cycle using the sunspot area(SSA) data during the period of May 1874 to December2020. Our results show that the 25 th solar cycle will be 55% stronger than Solar Cycle 24 with a maximum sunspot area of 3115±401 and the cycle reaching its peak in October 2022 by using the LSTM method. It also shows that deep learning algorithms perform better than the other commonly used methods and have high application value.展开更多
Based on the meteorological data of Langzhong from 2010 to 2020,the human body comfort index was calculated,and tourism climate comfort was evaluated to establish the prediction equation of tourism meteorological inde...Based on the meteorological data of Langzhong from 2010 to 2020,the human body comfort index was calculated,and tourism climate comfort was evaluated to establish the prediction equation of tourism meteorological index.OLS was used to compare the correlation between actual tourist flow and tourism meteorological index and test the model effect.Average correlation coefficient R was 0.7017,so the correlation was strong,and P value was 0.The two were significantly correlated at 0.01 level(bilateral).It can be seen that the forecast equation of tourism meteorological index had a strong correlation with the actual number of tourists,and the predicted value was basically close to the actual situation,and the forecast effect is good.展开更多
This article explores the comparison between the probability method and the least squares method in the design of linear predictive models. It points out that these two approaches have distinct theoretical foundations...This article explores the comparison between the probability method and the least squares method in the design of linear predictive models. It points out that these two approaches have distinct theoretical foundations and can lead to varied or similar results in terms of precision and performance under certain assumptions. The article underlines the importance of comparing these two approaches to choose the one best suited to the context, available data and modeling objectives.展开更多
Ocean energy has progressively gained considerable interest due to its sufficient potential to meet the world’s energy demand,and the blade is the core component in electricity generation from the ocean current.Howev...Ocean energy has progressively gained considerable interest due to its sufficient potential to meet the world’s energy demand,and the blade is the core component in electricity generation from the ocean current.However,the widened hydraulic excitation frequency may satisfy the blade resonance due to the time variation in the velocity and angle of attack of the ocean current,even resulting in blade fatigue and destructively interfering with grid stability.A key parameter that determines the resonance amplitude of the blade is the hydrodynamic damping ratio(HDR).However,HDR is difficult to obtain due to the complex fluid-structure interaction(FSI).Therefore,a literature review was conducted on the hydrodynamic damping characteristics of blade-like structures.The experimental and simulation methods used to identify and obtain the HDR quantitatively were described,placing emphasis on the experimental processes and simulation setups.Moreover,the accuracy and efficiency of different simulation methods were compared,and the modal work approach was recommended.The effects of key typical parameters,including flow velocity,angle of attack,gap,rotational speed,and cavitation,on the HDR were then summarized,and the suggestions on operating conditions were presented from the perspective of increasing the HDR.Subsequently,considering multiple flow parameters,several theoretical derivations and semi-empirical prediction formulas for HDR were introduced,and the accuracy and application were discussed.Based on the shortcomings of the existing research,the direction of future research was finally determined.The current work offers a clear understanding of the HDR of blade-like structures,which could improve the evaluation accuracy of flow-induced vibration in the design stage.展开更多
It is found that there is a linear relationship between log P-w, and the parameter term V-f/0.5 E(coh) [1+(delta(w) - delta(p))(2)/delta(p)(2), from the water permeability (P-w) data of 21 polymers covering 4 orders o...It is found that there is a linear relationship between log P-w, and the parameter term V-f/0.5 E(coh) [1+(delta(w) - delta(p))(2)/delta(p)(2), from the water permeability (P-w) data of 21 polymers covering 4 orders of magnitude. This correlation may be useful in choosing membrane materials for dehumidification of gases.展开更多
In order to improve the accuracy of prediction when using the empirical orthogonal function （EOF） method, this paper describes a novel approach for two-dimensional （2D） EOF analysis based on extrapolating both the...In order to improve the accuracy of prediction when using the empirical orthogonal function （EOF） method, this paper describes a novel approach for two-dimensional （2D） EOF analysis based on extrapolating both the spatial and temporal EOF components for long-term prediction of coastal morphological changes. The approach was investigated with data obtained from a process-based numerical model, COAST2D, which was applied to an idealized study site with a group of shore-parallel breakwaters. The progressive behavior of the spatial and temporal EOF components, related to bathymetric changes over a training period, was demonstrated, and EOF components were extrapolated with combined linear and exponential functions for long-term prediction. The extrapolated EOF components were then used to reconstruct bathymetric changes. The comparison of the reconstructed bathymetric changes with the modeled results from the COAST2D model illustrates that the presented approach can be effective for long-term prediction of coastal morphological changes, and extrapolating both the spatial and temporal EOF components yields better results than extrapolating only the temporal EOF component.展开更多
基金supported by grants from the National Science Foundation of China(Grant Nos.12375038 and 12075171 to ZJT,and 12205223 to YLT).
文摘RNAs have important biological functions and the functions of RNAs are generally coupled to their structures, especiallytheir secondary structures. In this work, we have made a comprehensive evaluation of the performances of existingtop RNA secondary structure prediction methods, including five deep-learning (DL) based methods and five minimum freeenergy (MFE) based methods. First, we made a brief overview of these RNA secondary structure prediction methods.Afterwards, we built two rigorous test datasets consisting of RNAs with non-redundant sequences and comprehensivelyexamined the performances of the RNA secondary structure prediction methods through classifying the RNAs into differentlength ranges and different types. Our examination shows that the DL-based methods generally perform better thanthe MFE-based methods for RNAs with long lengths and complex structures, while the MFE-based methods can achievegood performance for small RNAs and some specialized MFE-based methods can achieve good prediction accuracy forpseudoknots. Finally, we provided some insights and perspectives in modeling RNA secondary structures.
基金financially supported by the National Natural Science Foundation of China(Nos.42277149,41502299,41372306)the Research Planning of Sichuan Education Department,China(No.16ZB0105)+3 种基金the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Independent Research Project(Nos.SKLGP2016Z007,SKLGP2018Z017,SKLGP2020Z009)Chengdu University of Technology Young and Middle Aged Backbone Program(No.KYGG201720)Sichuan Provincial Science and Technology Department Program(No.19YYJC2087)China Scholarship Council。
文摘To tackle the difficulties of the point prediction in quantifying the reliability of landslide displacement prediction,a data-driven combination-interval prediction method(CIPM)based on copula and variational-mode-decomposition associated with kernel-based-extreme-learningmachine optimized by the whale optimization algorithm(VMD-WOA-KELM)is proposed in this paper.Firstly,the displacement is decomposed by VMD to three IMF components and a residual component of different fluctuation characteristics.The key impact factors of each IMF component are selected according to Copula model,and the corresponding WOA-KELM is established to conduct point prediction.Subsequently,the parametric method(PM)and non-parametric method(NPM)are used to estimate the prediction error probability density distribution(PDF)of each component,whose prediction interval(PI)under the 95%confidence level is also obtained.By means of the differential evolution algorithm(DE),a weighted combination model based on the PIs is built to construct the combination-interval(CI).Finally,the CIs of each component are added to generate the total PI.A comparative case study shows that the CIPM performs better in constructing landslide displacement PI with high performance.
基金financially supported by the National Natural Science Foundation of China(Grant No.52074331).
文摘Wellbore instability is one of the significant challenges in the drilling engineering and during the development of carbonate reservoirs,especially with open-hole completion.The problems of wellbore instability such as downhole collapse and silt deposit in the fractured carbonate reservoir of Tarim Basin(Ordovician)are severe.Solid destabilization and production(SDP)was proposed to describe this engineering problem of carbonate reservoirs.To clarify the mechanism and mitigate potential borehole instability problems,we conducted particle size distribution(PSD)analysis,X-ray diffraction(XRD)analysis,triaxial compression tests,and micro-scale sand production tests based on data analysis.We found that the rock fragments and silt in the wellbore came from two sources:one from the wellbore collapse in the upper unplugged layers and the other from the production of sand particles carried by the fluid in the productive layers.Based on the experimental study,a novel method combining a geomechanical model and microscopic sand production model was proposed to predict wellbore instability and analyze its influencing factors.The critical condition and failure zone predicted by the prediction model fit well with the field observations.According to the prediction results,the management and prevention measures of wellbore instability in carbonate reservoirs were proposed.It is suggested to optimize the well track in new drilling wells while upgrading the production system in old wells.This study is of great guiding significance for the optimization of carbonate solid control and it improves the understanding of the sand production problems in carbonate reservoirs.
基金supported by the National Natural Science Foundation of China(52174162)the Fundamental Research Funds for the Central Universities(FRF-TP-20-002A3).
文摘Accurate prediction of coal and gas outburst(CGO)hazards is paramount in gas disaster prevention and control.This paper endeavors to overcome the constraints posed by traditional prediction indexes when dealing with CGO incidents under low gas pressure conditions.In pursuit of this objective,we have studied and established a mechanical model of the working face under abnormal stress and the excitation energy conditions of CGO,and proposed a method for predicting the risk of CGO under abnormal stress.On site application verification shows that when a strong outburst hazard level prediction is issued,there is a high possibility of outburst disasters occurring.In one of the three locations where we predicted strong outburst hazards,a small outburst occurred,and the accuracy of the prediction was higher than the traditional drilling cuttings index S and drilling cuttings gas desorption index q.Finally,we discuss the mechanism of CGO under the action of stress anomalies.Based on the analysis of stress distribution changes and energy accumulation characteristics of coal under abnormal stress,this article believes that the increase in outburst risk caused by high stress abnormal gradient is mainly due to two reasons:(1)The high stress abnormal gradient leads to an increase in the plastic zone of the coal seam.After the working face advances,it indirectly leads to an increase in the gas expansion energy that can be released from the coal seam before reaching a new stress equilibrium.(2)Abnormal stress leads to increased peak stress of coal body in front of working face.When coal body in elastic area transforms to plastic area,its failure speed is accelerated,which induces accelerated gas desorption and aggravates the risk of outburst.
基金co-supported by the National Nature Science Foundation of China(No.12303071)the Shanghai Science and Technology Plan Project,China(No.23YF1455500)+1 种基金the China Postdoctoral Science Foundation(No.2023M743653)Ministry of Industry and Information Technology of China through the High Precision Timing Service Project(No.TC220A04A-80)。
文摘The mathematical method of ZTD(zenith tropospheric delay)spatial prediction is important for precise ZTD derivation and real-time precise point positioning(PPP)augmentation.This paper analyses the performance of the popular optimal function coefficient(OFC),sphere cap harmonic analysis(SCHA),kriging and inverse distance weighting(IDW)interpolation in ZTD spatial prediction and Beidou satellite navigation system(BDS)-PPP augmentation over China.For ZTD spatial prediction,the average time consumption of the OFC,kriging,and IDW methods is less than 0.1 s,which is significantly better than that of the SCHA method(63.157 s).The overall ZTD precision of the OFC is 3.44 cm,which outperforms those of the SCHA(9.65 cm),Kriging(10.6 cm),and IDW(11.8 cm)methods.We confirmed that the low performance of kriging and IDW is caused by their weakness in modelling ZTD variation in the vertical direction.To mitigate such deficiencies,an elevation normalization factor(ENF)is introduced into the kriging and IDW models(kriging-ENF and IDW-ENF).The overall ZTD spatial prediction accuracies of IDW-ENF and kriging-ENF are 2.80 cm and 2.01 cm,respectively,which are both superior to those of the OFC and the widely used empirical model GPT3(4.92 cm).For BDS-PPP enhancement,the ZTD provided by the kriging-ENF,IDW-ENF and OFC as prior constraints can effectively reduce the convergence time.Compared with unconstrained BDS-PPP,our proposed kriging-ENF outperforms IDW-ENF and OFC by reducing the horizontal and vertical convergence times by approximately 13.2%and 5.8%in Ningxia and 30.4%and 7.84%in Guangdong,respectively.These results indicate that kriging-ENF is a promising method for ZTD spatial prediction and BDS-PPP enhancement over China.
基金This work is funded by the National Natural Science Foundation of China(Grant Nos.42377164 and 52079062)the National Science Fund for Distinguished Young Scholars of China(Grant No.52222905).
文摘In the existing landslide susceptibility prediction(LSP)models,the influences of random errors in landslide conditioning factors on LSP are not considered,instead the original conditioning factors are directly taken as the model inputs,which brings uncertainties to LSP results.This study aims to reveal the influence rules of the different proportional random errors in conditioning factors on the LSP un-certainties,and further explore a method which can effectively reduce the random errors in conditioning factors.The original conditioning factors are firstly used to construct original factors-based LSP models,and then different random errors of 5%,10%,15% and 20%are added to these original factors for con-structing relevant errors-based LSP models.Secondly,low-pass filter-based LSP models are constructed by eliminating the random errors using low-pass filter method.Thirdly,the Ruijin County of China with 370 landslides and 16 conditioning factors are used as study case.Three typical machine learning models,i.e.multilayer perceptron(MLP),support vector machine(SVM)and random forest(RF),are selected as LSP models.Finally,the LSP uncertainties are discussed and results show that:(1)The low-pass filter can effectively reduce the random errors in conditioning factors to decrease the LSP uncertainties.(2)With the proportions of random errors increasing from 5%to 20%,the LSP uncertainty increases continuously.(3)The original factors-based models are feasible for LSP in the absence of more accurate conditioning factors.(4)The influence degrees of two uncertainty issues,machine learning models and different proportions of random errors,on the LSP modeling are large and basically the same.(5)The Shapley values effectively explain the internal mechanism of machine learning model predicting landslide sus-ceptibility.In conclusion,greater proportion of random errors in conditioning factors results in higher LSP uncertainty,and low-pass filter can effectively reduce these random errors.
基金This study was supported by the National Key Research and Development Program of China(No.2017YFB0304100)Key Projects of the National Natural Science Foundation of China(No.51634002).
文摘Aiming at the problem of insufficient prediction accuracy of strip flatness at the outlet of cold tandem rolling,the prediction performance of strip flatness based on different ensemble methods was studied and a high-precision prediction ensemble model of strip flatness at the outlet was established.Firstly,based on linear regression(LR),K nearest neighbors(KNN),support vector regression,regression trees(RT),and backpropagation neural network(BPN),bagging,boosting,and stacking ensemble methods were used for ensemble experiments.Secondly,three existing ensemble models,i.e.,random forest,extreme random tree(ET)and extreme gradient boosting,were used to conduct experiments and compare the results.The research shows that bagging,boosting,and stacking three ensemble methods have the most significant improvement in the prediction accuracy of the regression trees model,which is increased by 5.28%,6.51%,and 5.32%,respectively.At the same time,the stacking ensemble method improves both the simple model and the complex model,and the improvement effect on the simple base model is the greatest,which is 4.69%higher than that of the base model KNN.Comparing all of the ensemble models,the stacking ensemble model of level-1(ET,AdaBoost-RT,LR,BPN)paired with level-2(LR)was discovered to be the best model(EALB-LR)and can be further studied for industrial applications.
基金Item Sponsored by Beijing Higher Education Young Elite Teacher Project(YETP0382)2012 Ladder Plan Project of Beijing Key Laboratory of Knowledge Engineering for Materials Science of China(Z121101002812005)
文摘A two-stage hybrid method is proposed to predict the phosphorus content of molten steel at the endpoint of steelmaking in BOF(Basic Oxygen Furnace). At the first clustering stage, the weighted K-means is performed to produce clusters with homogeneous data. At the second predicting stage, each fuzzy neural network is carried out on each cluster and the results from all fuzzy neural networks are combined to be the final result of the hybrid method. The hybrid method and single fuzzy neural network are compared and the results show that the hybrid method outperforms single fuzzy neural network.
文摘Objective：To investigate the reliability for kinetic assay of substance with background predicted by the integrated method using uricase reaction as model. Methods： Absorbance before uricase action （Δ0） was estimated by extrapolation with given lag time of steady-state reaction. With Km fixed at 12.5μmol/L, background absorbance （Δb） was predicted by nonlinearly fitting integrated Michaelis-Menten equation to Candida utilis uricase reaction curve. Uric acid in reaction solution was determined by the difference （ΔA） between Δ0 and Δb. Results .Ab usually showed deviation 〈3% from direct assay with residual substrate done fifth of initial substrate for analysis. ΔA showed CV 〈5% with resistance to common interferences except xanthine, and it linearly responded to uric acid with slope consistent to the absorptivity of uric acid. The lower limit was 2.0 μmol/L and upper limit reached 30 μmol/L in reaction solution with data monitored within 8 min reaction at 0. 015 U/ml uricase. Preliminary application to serum and urine gave better precision than the direct equilibrium method without the removal of proteins before analysis. Conclusion .This kinetic method with background predicted by the integrated method was reliable for enzymatic analysis, and it showed resistance to common interferences and enhanced efficiency at much lower cost.
文摘Prediction of surface subsidence caused by longwall mining operation in inclined coal seams is often very challenging. The existing empirical prediction methods are inflexible for varying geological and mining conditions. An improved influence function method has been developed to take the advantage of its fundamentally sound nature and flexibility. In developing this method, the original Knothe function has been transformed to produce a continuous and asymmetrical subsidence influence function. The empirical equations for final subsidence parameters derived from col- lected longwall subsidence data have been incorporated into the mathematical models to improve the prediction accuracy. A number of demonstration cases for longwall mining operations in coal seams with varying inclination angles, depths and panel widths have been used to verify the applicability of the new subsidence prediction model.
基金supported by the Key Projects of Natural Science Foundation of China(No.41931284)the Scientific Research Start-Up Fund for High-Level Introduced Talents of Anhui University of Science and Technology(No.2022yjrc21).
文摘In the process of using the original key stratum theory to predict the height of a water-flowing fractured zone(WFZ),the influence of rock strata outside the calculation range on the rock strata within the calculation range as well as the fact that the shape of the overburden deformation area will change with the excavation length are ignored.In this paper,an improved key stratum theory(IKS theory)was proposed by fixing these two shortcomings.Then,a WFZ height prediction method based on IKS theory was established and applied.First,the range of overburden involved in the analysis was determined according to the tensile stress distribution range above the goaf.Second,the key stratum in the overburden involved in the analysis was identified through IKS theory.Finally,the tendency of the WFZ to develop upward was determined by judging whether or not the identified key stratum will break.The proposed method was applied and verified in a mining case study,and the reasons for the differences in the development patterns between the WFZs in coalfields in Northwest and East China were also fully explained by this method.
基金supported by the National Natural Science Foundation of China(No.52105161).
文摘Thin-walled torispherical heads under internal pressure can fail by plastic buckling because of compressive circumferential stresses in the head knuckle.However,existing formulas still have limitations,such as complicated expressions and low accuracy,in determining buckling pressure.In this paper,we propose a new formula for calculating the buckling pressure of torispherical heads based on elastic-plastic analysis and experimental results.First,a finite element(FE)method based on the arc-length method is established to calculate the plastic buckling pressure of torispherical heads,considering the effects of material strain hardening and geometrical nonlinearity.The buckling pressure results calculated by the FE method in this paper have good consistency with those of BOSOR5,which is a program for calculating the elastic-plastic bifurcation buckling pressure based on the finite difference energy method.Second,the effects of geometric parameters,material parameters,and restraint form of head edge on buckling pressure are investigated.Third,a new formula for calculating plastic buckling pressure is developed by fitting the curve of FE results and introducing a reduction factor determined from experimental data.Finally,based on the experimental results,we compare the predictions of the new formula with those of existing formulas.It is shown that the new formula has a higher accuracy than the existing ones.
基金supported by the National Basic Research Program of China (Grant No. 2012CB417404)the National Natural Science Foundation of China (Grant Nos.41075064 and 41176014)
文摘The sea surface temperature （SST） in the In- dian Ocean affects the regional climate over the Asian continent mostly through a modulation of the monsoon system. It is still difficult to provide an a priori indication of the seasonal variability over the Indian Ocean. It is widely recognized that the warm and cold events of SST over the tropical Indian Ocean are strongly linked to those of the equatorial eastern Pacific. In this study, a statistical prediction model has been developed to predict the monthly SST over the tropical Indian Ocean. This model is a linear regression model based on the lag relationship between the SST over the tropical Indian Ocean and the Nino3.4 （5°S-5°N, 170°W-120°W） SST Index. The pre- dictor （i.e., Nino3.4 SST Index） has been operationally predicted by a large size ensemble E1 Nifio and the Southern Oscillation （ENSO） forecast system with cou- pled data assimilation （Leefs_CDA）, which achieves a high predictive skill of up to a 24-month lead time for the equatorial eastern Pacific SST. As a result, the prediction skill of the present statistical model over the tropical In- dian Ocean is better than that of persistence prediction for January 1982 through December 2009.
基金Project(2011ZX05009-004)supported by the National Science and Technology Major Projects of China
文摘Dimensional analysis and numerical simulations were carried out to research prediction method of breakthrough time of horizontal wells in bottom water reservoir. Four dimensionless independent variables and dimensionless time were derived from 10 influencing factors of the problem by using dimensional analysis. Simulations of horizontal well in reservoir with bottom water were run to find the prediction correlation. A general and concise functional relationship for predicting breakthrough time was established based on simulation results and theoretical analysis. The breakthrough time of one conceptual model predicted by the correlation is very close to the result by Eclipse with less than 2% error. The practical breakthrough time of one well in Helder oilfield is 10 d, and the predicted results by the method is 11.2 d, which is more accurate than the analytical result. Case study indicates that the method could predict breakthrough time of horizontal well under different reservoir conditions accurately. For its university and ease of use, the method is suitable for quick prediction of breakthrough time.
基金supported by the National Natural Science Foundation of China under Grant numbers U2031202,U1731124 and U1531247the special foundation work of the Ministry of Science and Technology of the People’s Republic of China under Grant number 2014FY120300the 13th Five-year Informatization Plan of Chinese Academy of Sciences under Grant number XXH13505-04。
文摘It is a significant task to predict the solar activity for space weather and solar physics. All kinds of approaches have been used to forecast solar activities, and they have been applied to many areas such as the solar dynamo of simulation and space mission planning. In this paper, we employ the long-shortterm memory(LSTM) and neural network autoregression(NNAR) deep learning methods to predict the upcoming 25 th solar cycle using the sunspot area(SSA) data during the period of May 1874 to December2020. Our results show that the 25 th solar cycle will be 55% stronger than Solar Cycle 24 with a maximum sunspot area of 3115±401 and the cycle reaching its peak in October 2022 by using the LSTM method. It also shows that deep learning algorithms perform better than the other commonly used methods and have high application value.
文摘Based on the meteorological data of Langzhong from 2010 to 2020,the human body comfort index was calculated,and tourism climate comfort was evaluated to establish the prediction equation of tourism meteorological index.OLS was used to compare the correlation between actual tourist flow and tourism meteorological index and test the model effect.Average correlation coefficient R was 0.7017,so the correlation was strong,and P value was 0.The two were significantly correlated at 0.01 level(bilateral).It can be seen that the forecast equation of tourism meteorological index had a strong correlation with the actual number of tourists,and the predicted value was basically close to the actual situation,and the forecast effect is good.
文摘This article explores the comparison between the probability method and the least squares method in the design of linear predictive models. It points out that these two approaches have distinct theoretical foundations and can lead to varied or similar results in terms of precision and performance under certain assumptions. The article underlines the importance of comparing these two approaches to choose the one best suited to the context, available data and modeling objectives.
基金Supported by the National Natural Science Foundation of China(Nos.52222904 and 52309117)China Postdoctoral Science Foundation(Nos.2022TQ0168 and 2023M731895).
文摘Ocean energy has progressively gained considerable interest due to its sufficient potential to meet the world’s energy demand,and the blade is the core component in electricity generation from the ocean current.However,the widened hydraulic excitation frequency may satisfy the blade resonance due to the time variation in the velocity and angle of attack of the ocean current,even resulting in blade fatigue and destructively interfering with grid stability.A key parameter that determines the resonance amplitude of the blade is the hydrodynamic damping ratio(HDR).However,HDR is difficult to obtain due to the complex fluid-structure interaction(FSI).Therefore,a literature review was conducted on the hydrodynamic damping characteristics of blade-like structures.The experimental and simulation methods used to identify and obtain the HDR quantitatively were described,placing emphasis on the experimental processes and simulation setups.Moreover,the accuracy and efficiency of different simulation methods were compared,and the modal work approach was recommended.The effects of key typical parameters,including flow velocity,angle of attack,gap,rotational speed,and cavitation,on the HDR were then summarized,and the suggestions on operating conditions were presented from the perspective of increasing the HDR.Subsequently,considering multiple flow parameters,several theoretical derivations and semi-empirical prediction formulas for HDR were introduced,and the accuracy and application were discussed.Based on the shortcomings of the existing research,the direction of future research was finally determined.The current work offers a clear understanding of the HDR of blade-like structures,which could improve the evaluation accuracy of flow-induced vibration in the design stage.
基金This work was supported by the National Natural Science Foundation of China
文摘It is found that there is a linear relationship between log P-w, and the parameter term V-f/0.5 E(coh) [1+(delta(w) - delta(p))(2)/delta(p)(2), from the water permeability (P-w) data of 21 polymers covering 4 orders of magnitude. This correlation may be useful in choosing membrane materials for dehumidification of gases.
基金the School of Engineering at Cardiff University for providing the financial support of a Ph D studentship to accomplish the research
文摘In order to improve the accuracy of prediction when using the empirical orthogonal function （EOF） method, this paper describes a novel approach for two-dimensional （2D） EOF analysis based on extrapolating both the spatial and temporal EOF components for long-term prediction of coastal morphological changes. The approach was investigated with data obtained from a process-based numerical model, COAST2D, which was applied to an idealized study site with a group of shore-parallel breakwaters. The progressive behavior of the spatial and temporal EOF components, related to bathymetric changes over a training period, was demonstrated, and EOF components were extrapolated with combined linear and exponential functions for long-term prediction. The extrapolated EOF components were then used to reconstruct bathymetric changes. The comparison of the reconstructed bathymetric changes with the modeled results from the COAST2D model illustrates that the presented approach can be effective for long-term prediction of coastal morphological changes, and extrapolating both the spatial and temporal EOF components yields better results than extrapolating only the temporal EOF component.
