The hydraulic roll bending control system usually has the dynamic characteristics of nonlinearity, slow time variance and strong outside interference in the roiling process, so it is difficult to establish a precise m...The hydraulic roll bending control system usually has the dynamic characteristics of nonlinearity, slow time variance and strong outside interference in the roiling process, so it is difficult to establish a precise mathemati- cal model for control. So, a new method for establishing a hydraulic roll bending control system is put forward by cerebellar model articulation controller （CMAC） neural network and proportional-integral-derivative （PID） coupling control strategy. The non-linear relationship between input and output can be achieved by the concept mapping and the actual mapping of CMAC. The simulation results show that, compared with the conventional PID control algo- rithm, the parallel control algorithm can overcome the influence of parameter change of roll bending system on the control performance, thus improve the anti jamming capability of the system greatly, reduce the dependence of con- trol performance on the accuracy of the analytical model, enhance the tracking performance of hydraulic roll bending loop for the hydraulic and roll bending force and increase system response speed. The results indicate that the CMAC-P1D coupling control strategy for hydraulic roll bending system is effective.展开更多
Based on the hydraulic bending control system,the electrohydraulic servo pressure control simulation model is built.Taking into account of the inadequacy of P-type immune feedback controller,an improved fuzzy immune P...Based on the hydraulic bending control system,the electrohydraulic servo pressure control simulation model is built.Taking into account of the inadequacy of P-type immune feedback controller,an improved fuzzy immune PID controller is put forward.Drawing on immune feedback principle of biological immune system,the P-type immune feedback controller is connected with conventional PID controller in series and then in parallel with design fuzzy immune PID controller.The controller parameters can be adjusted on line by the rules of immune feedback controller and fuzzy controller.In order to gain the optimal parameters of the controller,the parameters of the controller are off-line optimized by the best multiple optimal model PSO algorithm.The simulation results indicate that the method has characteristics of small overshoot,short adjusting time and strong anti-interference ability and robustness.The quality of the strip shape can be further improved.展开更多
Instead of the biharmonic type equation, a set of new governing equations and solving method for circular sector plate bending is presented based on the analogy between plate bending and plane elasticity problems. So ...Instead of the biharmonic type equation, a set of new governing equations and solving method for circular sector plate bending is presented based on the analogy between plate bending and plane elasticity problems. So the Hamiltonian system can also be applied to plate bending problems by introducing bending moment functions. The new method presents the analytical solution for the circular sector plate. The results show that the new method is effective.展开更多
The eigenfunction system of infinite-dimensional Hamiltonian operators appearing in the bending problem of rectangular plate with two opposites simply supported is studied. At first, the completeness of the extended e...The eigenfunction system of infinite-dimensional Hamiltonian operators appearing in the bending problem of rectangular plate with two opposites simply supported is studied. At first, the completeness of the extended eigenfunction system in the sense of Cauchy＇s principal value is proved. Then the incompleteness of the extended eigenfunction system in general sense is proved. So the completeness of the symplectic orthogonal system of the infinite-dimensional Hamiltonian operator of this kind of plate bending equation is proved. At last the general solution of the infinite dimensional Hamiltonian system is equivalent to the solution function system series expansion, so it gives to theoretical basis of the methods of separation of variables based on Hamiltonian system for this kind of equations.展开更多
For nonlinear hydraulic roll bending control, a new fuzzy intelligent control method was proposed based on the genetic neural network. The method taking account of dynamic and static characteristics of control system ...For nonlinear hydraulic roll bending control, a new fuzzy intelligent control method was proposed based on the genetic neural network. The method taking account of dynamic and static characteristics of control system has settled the problems of recognizing and controlling the unknown, uncertain and nonlinear system successfully, and has been applied to hydraulic roll bending control. The simulation results indicate that the system has good performance and strong robustness, and is better than traditional PID and neural-fuzzy control. The method is an effective tool to control roll bending force with increased dynamic response speed of control system and enhanced tracking accuracy.展开更多
An integrated CAD/CAPP/CAM system of tube manufacturing based on integration frame is presented. In this system, two kinds of data conventions describing tube shape are presented in tube CAD subsystem, the object-orie...An integrated CAD/CAPP/CAM system of tube manufacturing based on integration frame is presented. In this system, two kinds of data conventions describing tube shape are presented in tube CAD subsystem, the object-oriented concept and the goal-driven inference mechanism have been applied in the development of the knowledge-based CAPP subsystem and simulation of tube processing under tube bending simulation subsystem is performed based on the tube model＇s piecewise representation. A tube product case is considered to give the application of the integrated system, and the advantages of the system in the use of tube bending are revealed.展开更多
A theorem of solving a system of linear non-homogeneous differential equations through integrating and adding its basic solutions is put forward and proved, the mathematical role and physical nature of the theorem is ...A theorem of solving a system of linear non-homogeneous differential equations through integrating and adding its basic solutions is put forward and proved, the mathematical role and physical nature of the theorem is interpreted briefly. As an example, the theorem is applied to solve the problem of thermo-force bending of a thick plate.展开更多
In this paper,a multiscale model is developed for the mass functionally graded(FG)beam-fluid system to investigate its static and dynamic responses based on 3D printed porous beam free vibration tests,which are determ...In this paper,a multiscale model is developed for the mass functionally graded(FG)beam-fluid system to investigate its static and dynamic responses based on 3D printed porous beam free vibration tests,which are determined by two aspects.At the microstructural level,the gradient variation is realized by arbitrary distribution of matrix pores,and the effective moduli under specific distribution are obtained using the micromechanics homogenization theory.In the meantime,at the structural level,the mechanical responses of FG porous beams subjected to mass loading are considered in a static fluid environment.Then,the explicit expressions of local finite-element(FE)expressions corresponding to the static and dynamic responses are given in the appendices.The present results are validated against numerical and experimental results from the literature and mechanical tests of 3D printed structures,with good agreement generally obtained,giving credence to the present model.On this basis,a comprehensive parametric study is carried out,with a particular focus on the effects of boundary conditions,fluid density,and slenderness ratio on the bending and vibration of FG beams with several different gradations.展开更多
The buckling response of pipe-in-pipe(PIP)systems subjected to bending is investigated in this paper. A set of parameterized models are established to explore the bending characteristics of the PIP systems through eig...The buckling response of pipe-in-pipe(PIP)systems subjected to bending is investigated in this paper. A set of parameterized models are established to explore the bending characteristics of the PIP systems through eigenvalue buckling analysis and nonlinear post-buckling analysis. The results show that the length of PIP systems and the height of centralizers are the most significant factors that influence the buckling moment, ultimate bending moment and buckling mode; the other geometric characteristics, such as initial geometric imperfection and friction between centralizers and outer pipes, evidently influence the post-buckling path and ductility of PIPs; the equivalent bending stiffness is dependent on the length and centralizers. Moreover, the range of equivalent bending stiffness is also discussed.展开更多
Flexoelectricity refers to the link between electrical polarization and strain gradient fields in piezoelectric materials,particularly at the nano-scale.The present investigation aims to comprehensively focus on the s...Flexoelectricity refers to the link between electrical polarization and strain gradient fields in piezoelectric materials,particularly at the nano-scale.The present investigation aims to comprehensively focus on the static bending analysis of a piezoelectric sandwich functionally graded porous(FGP)double-curved shallow nanoshell based on the flexoelectric effect and nonlocal strain gradient theory.Two coefficients that reduce or increase the stiffness of the nanoshell,including nonlocal and length-scale parameters,are considered to change along the nanoshell thickness direction,and three different porosity rules are novel points in this study.The nanoshell structure is placed on a Pasternak elastic foundation and is made up of three separate layers of material.The outermost layers consist of piezoelectric smart material with flexoelectric effects,while the core layer is composed of FGP material.Hamilton’s principle was used in conjunction with a unique refined higher-order shear deformation theory to derive general equilibrium equations that provide more precise outcomes.The Navier and Galerkin-Vlasov methodology is used to get the static bending characteristics of nanoshells that have various boundary conditions.The program’s correctness is assessed by comparison with published dependable findings in specific instances of the model described in the article.In addition,the influence of parameters such as flexoelectric effect,nonlocal and length scale parameters,elastic foundation stiffness coefficient,porosity coefficient,and boundary conditions on the static bending response of the nanoshell is detected and comprehensively studied.The findings of this study have practical implications for the efficient design and control of comparable systems,such as micro-electromechanical and nano-electromechanical devices.展开更多
This research utilizes analytical solutions to investigate the issue of nonlinear static bending in nanobeams affected by the flexomagnetic effect.The nanobeams are exposed to mechanical loads and put in a temperature...This research utilizes analytical solutions to investigate the issue of nonlinear static bending in nanobeams affected by the flexomagnetic effect.The nanobeams are exposed to mechanical loads and put in a temperature environment.The equilibrium equation of the beam is formulated based on the newly developed higher-order shear deformation theory.The flexomagnetic effect is explained by the presence of the strain gradient component,which also takes into consideration the impact of small-size effects.This study has used a flexible transformation to derive the equilibrium equation for a single variable,which significantly simplifies the process of determining the precise solution to the bending issue.This highlights the originality and significance of the present study,which is based on a newly developed shear deformation theory to clarify the distinctions between the nonlinear and linear problems.This study also presents the findings of numerical simulations that investigate the impact of various geometric,material,and temperature parameters on the nonlinear behavior of nanobeams.These discoveries are significant for designers to develop nanobeams that can function efficiently in many physical conditions,including mechanical,thermal,and magnetic mediums.展开更多
This research investigates the bending response of folded multi-celled tubes(FMTs)fabricated by folded metal sheets.A three-point bending test for FMTs with circular and square sections is designed and introduced.The ...This research investigates the bending response of folded multi-celled tubes(FMTs)fabricated by folded metal sheets.A three-point bending test for FMTs with circular and square sections is designed and introduced.The base numerical models are correlated with physical experiments and a static crashworthiness analysis of six FMT configurations to assess their energy absorption characteristics.The influences of thickness,sectional shape,and load direction on the bending response are studied.Results indicate that increasing the thickness of the tube and radian of the inner tube enhances the crashworthiness performance of FMT,yielding a 20.50%increase in mean crushing force,a 55.53%increase in specific energy absorption,and an 18.05%decrease in peak crushing force compared to traditional multi-celled tubes(TMTs).A theoretical analysis of the specific energy absorption indicates that FMTs outperform TMTs,particularly when the peak crushing force is prominent.This study highlights the innovative and practical potential of FMTs to improve the crashworthiness of thin-walled structures.展开更多
The relatively insufficient knowledge of the deformation behavior has limited the wide application of the lightest structure material-Mg alloys.Among others,bending behavior is of great importance because it is unavoi...The relatively insufficient knowledge of the deformation behavior has limited the wide application of the lightest structure material-Mg alloys.Among others,bending behavior is of great importance because it is unavoidably involved in various forming processes,such as folding,stamping,etc.The hexagonal close-packed structure makes it even a strong texture-dependent behavior and even hard to capture and predict.In this regard,the bending behaviors are investigated in terms of both experiments and simulations in the current work.Bending samples with longitudinal directions inclined from the transverse direction by different angles have been prepared from an extruded AZ31 plate,respectively.The moment-curvature curves and strain distribution have been recorded in the four-point bending tests assisted with an in-situ digital image correlation(DIC)system.A crystal-plasticity-based bending-specific approach named EVPSC-BEND was applied to bridge the mechanical response to the microstructure evolution and underlying deformation mechanisms.The flow stress,texture,twin volume fraction,stress distribution,and strain distribution evolve differently from sample to sample,manifesting strong texture-dependent bending behaviors.The underlying mechanisms associated with this texture dependency,especially the occurrence of both twinning and detwinning during the monotonic bending,are carefully discussed.Besides,the simulation has been conducted to reveal the moment-inclination angle relation of the investigated AZ31 extruded plate in terms of the polar coordinate,which intuitively shows the texture-dependent behaviors.Specifically,the samples with longitudinal directions parallel to the extruded direction bear the biggest initial yielding moment.展开更多
Buckling failure in submarine cables presents a prevalent challenge in ocean engineering.This work aims to explore the buckling behavior of umbilical cables with damaged sheaths subjected to compression and bending cy...Buckling failure in submarine cables presents a prevalent challenge in ocean engineering.This work aims to explore the buckling behavior of umbilical cables with damaged sheaths subjected to compression and bending cyclic loads.A finite element model is devised,incorporating a singular armor wire,a rigid core,and a damaged sheath.To scrutinize the buckling progression and corresponding deformation,axial compression and bending cyclic loads are introduced.The observations reveal that a reduction in axial compression results in a larger number of cycles before buckling ensues and progressively shifts the buckling position toward the extrados and fixed end.Decreasing the bending radius precipitates a reduction in the buckling cycle number and minimizes the deformation in the armor wire.Furthermore,an empirical model is presented to predict the occurrence of birdcage buckling,providing a means to anticipate buckling events and to estimate the requisite number of cycles leading to buckling.展开更多
With the rapid development of flexible electronics,the tactile systems for object recognition are becoming increasingly delicate.This paper presents the design of a tactile glove for object recognition,integrating 243...With the rapid development of flexible electronics,the tactile systems for object recognition are becoming increasingly delicate.This paper presents the design of a tactile glove for object recognition,integrating 243 palm pressure units and 126 finger joint strain units that are implemented by piezoresistive Velostat film.The palm pressure and joint bending strain data from the glove were collected using a two-dimensional resistance array scanning circuit and further converted into tactile images with a resolution of 32×32.To verify the effect of tactile data types on recognition precision,three datasets of tactile images were respectively built by palm pressure data,joint bending strain data,and a tactile data combing of both palm pressure and joint bending strain.An improved residual convolutional neural network(CNN)model,SP-ResNet,was developed by light-weighting ResNet-18 to classify these tactile images.Experimental results show that the data collection method combining palm pressure and joint bending strain demonstrates a 4.33%improvement in recognition precision compared to the best results obtained by using only palm pressure or joint bending strain.The recognition precision of 95.50%for 16 objects can be achieved by the presented tactile glove with SP-ResNet of less computation cost.The presented tactile system can serve as a sensing platform for intelligent prosthetics and robot grippers.展开更多
The fracture behavior of natural fracture in the geological reservoir subjected to filling property,affects the crack initiation and propagation under stress perturbation.Partial filling flaws were intermediate betwee...The fracture behavior of natural fracture in the geological reservoir subjected to filling property,affects the crack initiation and propagation under stress perturbation.Partial filling flaws were intermediate between open fractures and filled fractures,the fracture response may be worth exploring.In this work,the effect of the filling property of sandstone with partial filling flaws on the fracture behavior was systematically investigated based on three-point bending tests and the numerical approach of discrete element method(DEM).In the laboratory,semi-circular three-point bending tests were carried out with partial filling flaws of various filling strengths.Based on this,numerical simulations were used to further investigate the effect of the filling ratio and the inclination of the partial filling flaw on the mechanical and fracture responses,and the effect of the partial filling flaw under mixed-mode loading on the fracture mechanism was elucidated coupled with acoustic emission(AE)characteristics.The obtained results showed that the increase in filling strength and filling ratio of partial filling flaw led to an increase in peak strength,with a decreasing trend in peak strength with the inclination of partial filling flaw.In terms of crack propagation pattern,the increasing filling strength of the partial filling flaw induced the transformation of the fracture mechanism toward deflection,with a tortuosity path,while the filling ratio and inclination of partial filling flaw led to fracture mechanism change from deflection to penetration and attraction,accompanied with a larger AE event source in filler.Accordingly,the b-value based on the Gutenberg-Richter equation fluctuated between 5 and 4 at low filling ratio and inclination and remained around 5 at high filling ratio and inclination of partial filling flaw.Related results may provide an application prospective for reservoir stimulation using the natural fracture system.展开更多
In the era of Metaverse and virtual reality(VR)/augmented reality(AR),capturing finger motion and force interactions is crucial for immersive human-machine interfaces.This study introduces a flexible electronic skin f...In the era of Metaverse and virtual reality(VR)/augmented reality(AR),capturing finger motion and force interactions is crucial for immersive human-machine interfaces.This study introduces a flexible electronic skin for the index finger,addressing coupled perception of both state and process in dynamic tactile sensing.The device integrates resistive and giant magnetoelastic sensors,enabling detection of surface pressure and finger joint bending.This e-skin identifies three phases of finger action:bending state,dynamic normal force and tangential force(sweeping).The system comprises resistive carbon nanotubes(CNT)/polydimethylsiloxane(PDMS)films for bending sensing and magnetoelastic sensors(NdFeB particles,EcoFlex,and flexible coils)for pressure detection.The inward bending resistive sensor,based on self-assembled microstructures,exhibits directional specificity with a response time under 120 ms and bending sensitivity from 0°to 120°.The magnetoelastic sensors demonstrate specific responses to frequency and deformation magnitude,as well as sensitivity to surface roughness during sliding and material hardness.The system’s capability is demonstrated through tactile-based bread type and condition recognition,achieving 92%accuracy.This intelligent patch shows broad potential in enhancing interactions across various fields,from VR/AR interfaces and medical diagnostics to smart manufacturing and industrial automation.展开更多
Two cross⁃sectional configurations of thin⁃walled square tubes partially filled with lightweight metallic foams are proposed,and termed as double⁃cell configuration partially filled with foam(DC⁃PF)and double⁃tube con...Two cross⁃sectional configurations of thin⁃walled square tubes partially filled with lightweight metallic foams are proposed,and termed as double⁃cell configuration partially filled with foam(DC⁃PF)and double⁃tube configuration partially filled with foam(DT⁃PF),respectively.The bending crashworthiness is investigated based on three⁃point bending tests using finite element ABAQUS/Explicit code.The two key mechanical indicators including Crash Load Efficiency(CLE)and Specific Energy Absorption(SEA)are introduced to evaluate the effect of foams in comparison with empty square tubes and fully filled square tubes.The numerical results show that the two partially filled configurations,especially DT⁃PF,display dramatically excellent bending crashworthiness compared with empty and fully filled square tubes.There exists a foam density threshold,beyond which the CLE of DT⁃PF achieves a maximum constant.In addition,there seems to be another foam density threshold,beyond which the SEA of DT⁃PF gets to the maximum value.It is also shown that the foam density threshold corresponding to the maximum SEA varies with the thickness of thin⁃walled square tubes.展开更多
Aiming at solve the difficulty and low dimensional accuracy in bending titanium alloy specimens at room temperature,we proposed a compound energy field(CEF)with laser and ultrasonic forming method.Through the conventi...Aiming at solve the difficulty and low dimensional accuracy in bending titanium alloy specimens at room temperature,we proposed a compound energy field(CEF)with laser and ultrasonic forming method.Through the conventional bending,laser-assisted energy field bending and CEF-assisted bending experiments on TC4 titanium alloy,the effects of bending force,laser-assisted energy field and CEF on the springback angle and fillet radius of TC4 titanium alloy specimens in V-shape bending were analyzed.The impact of the CEF-assisted bending process on the microstructure of TC4 titanium alloy was also investigated.The results show that CEF-assisted bending process has the advantages of high energy density,simple operation process and small influence area of the microstructure performances.It is effective in reducing the springback and fillet radius of bending specimens.Thus,CEF-assisted bending effectively improves the formability and surface quality of titanium alloy specimens.展开更多
Any product must undergo precise manufacturing before use.The damage incurred during the manufacturing process can significantly impact the residual strength of the product post-manufacturing.However,the relationship ...Any product must undergo precise manufacturing before use.The damage incurred during the manufacturing process can significantly impact the residual strength of the product post-manufacturing.However,the relationship between residual bending strength and manufacturing-induced damage remains unclear,despite being a crucial parameter for assessing material service life and performance,leading to a decrease in product performance reliability.This study focuses on investigating the impact of crack generation on residual bending strength through theoretical and experimental analyses of scratching,grinding,and three-point bending.The research first elucidates the forms and mechanisms of material damage through scratch experiments.Subsequently,using resin-bonded and electroplated wheels as case studies,the influence of different process parameters on grinding damage and residual bending strength is explored.The reduction of brittle removal can lead to a 50%–60%decrease in residual bending strength.Lastly,a model is developed to delineate the relationship between processing parameters and the residual bending strength of the product,with the model exhibiting an error margin of less than 11%.This model clearly reveals the effect of crack generation under different process parameters on residual flexural strength.展开更多
基金Item Sponsored by National High-Tech Research and Development Program(863Program)of China(2009AA04Z143)Natural Science Foundation of Hebei Province of China(E2006001038)Hebei Provincial Science and Technology Project of China(10212101D)
文摘The hydraulic roll bending control system usually has the dynamic characteristics of nonlinearity, slow time variance and strong outside interference in the roiling process, so it is difficult to establish a precise mathemati- cal model for control. So, a new method for establishing a hydraulic roll bending control system is put forward by cerebellar model articulation controller （CMAC） neural network and proportional-integral-derivative （PID） coupling control strategy. The non-linear relationship between input and output can be achieved by the concept mapping and the actual mapping of CMAC. The simulation results show that, compared with the conventional PID control algo- rithm, the parallel control algorithm can overcome the influence of parameter change of roll bending system on the control performance, thus improve the anti jamming capability of the system greatly, reduce the dependence of con- trol performance on the accuracy of the analytical model, enhance the tracking performance of hydraulic roll bending loop for the hydraulic and roll bending force and increase system response speed. The results indicate that the CMAC-P1D coupling control strategy for hydraulic roll bending system is effective.
基金Item Sponsored by National Natural Science Foundation of China(50534020)National Key Technology Research and Development Program in 11th Five-Year Plan of China(2007BAF02B12)
文摘Based on the hydraulic bending control system,the electrohydraulic servo pressure control simulation model is built.Taking into account of the inadequacy of P-type immune feedback controller,an improved fuzzy immune PID controller is put forward.Drawing on immune feedback principle of biological immune system,the P-type immune feedback controller is connected with conventional PID controller in series and then in parallel with design fuzzy immune PID controller.The controller parameters can be adjusted on line by the rules of immune feedback controller and fuzzy controller.In order to gain the optimal parameters of the controller,the parameters of the controller are off-line optimized by the best multiple optimal model PSO algorithm.The simulation results indicate that the method has characteristics of small overshoot,short adjusting time and strong anti-interference ability and robustness.The quality of the strip shape can be further improved.
基金National Natural Science Foundation(No.19732020)the Doctoral Research Foundation of China
文摘Instead of the biharmonic type equation, a set of new governing equations and solving method for circular sector plate bending is presented based on the analogy between plate bending and plane elasticity problems. So the Hamiltonian system can also be applied to plate bending problems by introducing bending moment functions. The new method presents the analytical solution for the circular sector plate. The results show that the new method is effective.
基金Supported by the National Natural Science Foundation of China under Grant No. 10962004the Specialized Research Fund for the Doctoral Program of Higher Education of China under Grant No. 20070126002
文摘The eigenfunction system of infinite-dimensional Hamiltonian operators appearing in the bending problem of rectangular plate with two opposites simply supported is studied. At first, the completeness of the extended eigenfunction system in the sense of Cauchy＇s principal value is proved. Then the incompleteness of the extended eigenfunction system in general sense is proved. So the completeness of the symplectic orthogonal system of the infinite-dimensional Hamiltonian operator of this kind of plate bending equation is proved. At last the general solution of the infinite dimensional Hamiltonian system is equivalent to the solution function system series expansion, so it gives to theoretical basis of the methods of separation of variables based on Hamiltonian system for this kind of equations.
文摘For nonlinear hydraulic roll bending control, a new fuzzy intelligent control method was proposed based on the genetic neural network. The method taking account of dynamic and static characteristics of control system has settled the problems of recognizing and controlling the unknown, uncertain and nonlinear system successfully, and has been applied to hydraulic roll bending control. The simulation results indicate that the system has good performance and strong robustness, and is better than traditional PID and neural-fuzzy control. The method is an effective tool to control roll bending force with increased dynamic response speed of control system and enhanced tracking accuracy.
基金Sponsored bythe Ministerial Level Research Foundation(T29483939)
文摘An integrated CAD/CAPP/CAM system of tube manufacturing based on integration frame is presented. In this system, two kinds of data conventions describing tube shape are presented in tube CAD subsystem, the object-oriented concept and the goal-driven inference mechanism have been applied in the development of the knowledge-based CAPP subsystem and simulation of tube processing under tube bending simulation subsystem is performed based on the tube model＇s piecewise representation. A tube product case is considered to give the application of the integrated system, and the advantages of the system in the use of tube bending are revealed.
文摘A theorem of solving a system of linear non-homogeneous differential equations through integrating and adding its basic solutions is put forward and proved, the mathematical role and physical nature of the theorem is interpreted briefly. As an example, the theorem is applied to solve the problem of thermo-force bending of a thick plate.
基金supported by the National Key Research and Development Program of China(No.2020YFA0711700)the National Natural Science Foundation of China(No.12322206,No.52378158,No.12302205)ZJU-ZCCC Institute of Collaborative Innovation(No.ZDJG2021002).
文摘In this paper,a multiscale model is developed for the mass functionally graded(FG)beam-fluid system to investigate its static and dynamic responses based on 3D printed porous beam free vibration tests,which are determined by two aspects.At the microstructural level,the gradient variation is realized by arbitrary distribution of matrix pores,and the effective moduli under specific distribution are obtained using the micromechanics homogenization theory.In the meantime,at the structural level,the mechanical responses of FG porous beams subjected to mass loading are considered in a static fluid environment.Then,the explicit expressions of local finite-element(FE)expressions corresponding to the static and dynamic responses are given in the appendices.The present results are validated against numerical and experimental results from the literature and mechanical tests of 3D printed structures,with good agreement generally obtained,giving credence to the present model.On this basis,a comprehensive parametric study is carried out,with a particular focus on the effects of boundary conditions,fluid density,and slenderness ratio on the bending and vibration of FG beams with several different gradations.
基金Supported by the National Basic Research Program of China("973" Program,No.2014CB046801)
文摘The buckling response of pipe-in-pipe(PIP)systems subjected to bending is investigated in this paper. A set of parameterized models are established to explore the bending characteristics of the PIP systems through eigenvalue buckling analysis and nonlinear post-buckling analysis. The results show that the length of PIP systems and the height of centralizers are the most significant factors that influence the buckling moment, ultimate bending moment and buckling mode; the other geometric characteristics, such as initial geometric imperfection and friction between centralizers and outer pipes, evidently influence the post-buckling path and ductility of PIPs; the equivalent bending stiffness is dependent on the length and centralizers. Moreover, the range of equivalent bending stiffness is also discussed.
基金This work was supported by the Le Quy Don Technical University Research Fund(Grant No.23.1.11).
文摘Flexoelectricity refers to the link between electrical polarization and strain gradient fields in piezoelectric materials,particularly at the nano-scale.The present investigation aims to comprehensively focus on the static bending analysis of a piezoelectric sandwich functionally graded porous(FGP)double-curved shallow nanoshell based on the flexoelectric effect and nonlocal strain gradient theory.Two coefficients that reduce or increase the stiffness of the nanoshell,including nonlocal and length-scale parameters,are considered to change along the nanoshell thickness direction,and three different porosity rules are novel points in this study.The nanoshell structure is placed on a Pasternak elastic foundation and is made up of three separate layers of material.The outermost layers consist of piezoelectric smart material with flexoelectric effects,while the core layer is composed of FGP material.Hamilton’s principle was used in conjunction with a unique refined higher-order shear deformation theory to derive general equilibrium equations that provide more precise outcomes.The Navier and Galerkin-Vlasov methodology is used to get the static bending characteristics of nanoshells that have various boundary conditions.The program’s correctness is assessed by comparison with published dependable findings in specific instances of the model described in the article.In addition,the influence of parameters such as flexoelectric effect,nonlocal and length scale parameters,elastic foundation stiffness coefficient,porosity coefficient,and boundary conditions on the static bending response of the nanoshell is detected and comprehensively studied.The findings of this study have practical implications for the efficient design and control of comparable systems,such as micro-electromechanical and nano-electromechanical devices.
文摘This research utilizes analytical solutions to investigate the issue of nonlinear static bending in nanobeams affected by the flexomagnetic effect.The nanobeams are exposed to mechanical loads and put in a temperature environment.The equilibrium equation of the beam is formulated based on the newly developed higher-order shear deformation theory.The flexomagnetic effect is explained by the presence of the strain gradient component,which also takes into consideration the impact of small-size effects.This study has used a flexible transformation to derive the equilibrium equation for a single variable,which significantly simplifies the process of determining the precise solution to the bending issue.This highlights the originality and significance of the present study,which is based on a newly developed shear deformation theory to clarify the distinctions between the nonlinear and linear problems.This study also presents the findings of numerical simulations that investigate the impact of various geometric,material,and temperature parameters on the nonlinear behavior of nanobeams.These discoveries are significant for designers to develop nanobeams that can function efficiently in many physical conditions,including mechanical,thermal,and magnetic mediums.
基金supported by the National Natural Science Foundation of China(Grant No.52475277)2022 Guangxi University Young and Middle-aged Teachers’Basic Research Ability Improvement Project(Grant No.2022KY0781)Scientific Research Funds of Guilin University of Aerospace Technology(Grant No.XJ22KT29).
文摘This research investigates the bending response of folded multi-celled tubes(FMTs)fabricated by folded metal sheets.A three-point bending test for FMTs with circular and square sections is designed and introduced.The base numerical models are correlated with physical experiments and a static crashworthiness analysis of six FMT configurations to assess their energy absorption characteristics.The influences of thickness,sectional shape,and load direction on the bending response are studied.Results indicate that increasing the thickness of the tube and radian of the inner tube enhances the crashworthiness performance of FMT,yielding a 20.50%increase in mean crushing force,a 55.53%increase in specific energy absorption,and an 18.05%decrease in peak crushing force compared to traditional multi-celled tubes(TMTs).A theoretical analysis of the specific energy absorption indicates that FMTs outperform TMTs,particularly when the peak crushing force is prominent.This study highlights the innovative and practical potential of FMTs to improve the crashworthiness of thin-walled structures.
基金supported by State Key Laboratory for Geo Mechanics and Deep Underground Engineering,China University of Mining&Technology,Beijing(XD2021021)the National Natural Science Foundation of China(Nos.52075325,51975365,and 52011540403)。
文摘The relatively insufficient knowledge of the deformation behavior has limited the wide application of the lightest structure material-Mg alloys.Among others,bending behavior is of great importance because it is unavoidably involved in various forming processes,such as folding,stamping,etc.The hexagonal close-packed structure makes it even a strong texture-dependent behavior and even hard to capture and predict.In this regard,the bending behaviors are investigated in terms of both experiments and simulations in the current work.Bending samples with longitudinal directions inclined from the transverse direction by different angles have been prepared from an extruded AZ31 plate,respectively.The moment-curvature curves and strain distribution have been recorded in the four-point bending tests assisted with an in-situ digital image correlation(DIC)system.A crystal-plasticity-based bending-specific approach named EVPSC-BEND was applied to bridge the mechanical response to the microstructure evolution and underlying deformation mechanisms.The flow stress,texture,twin volume fraction,stress distribution,and strain distribution evolve differently from sample to sample,manifesting strong texture-dependent bending behaviors.The underlying mechanisms associated with this texture dependency,especially the occurrence of both twinning and detwinning during the monotonic bending,are carefully discussed.Besides,the simulation has been conducted to reveal the moment-inclination angle relation of the investigated AZ31 extruded plate in terms of the polar coordinate,which intuitively shows the texture-dependent behaviors.Specifically,the samples with longitudinal directions parallel to the extruded direction bear the biggest initial yielding moment.
基金financially supported by the National Natural Science Foundation of China(Grant No.52471301)the Fujian Province Transportation Science and Technology Project(Grant No.JC202302)the Zhejiang Provincial Natural Science Foundation of China(Grant No.LY24E090003).
文摘Buckling failure in submarine cables presents a prevalent challenge in ocean engineering.This work aims to explore the buckling behavior of umbilical cables with damaged sheaths subjected to compression and bending cyclic loads.A finite element model is devised,incorporating a singular armor wire,a rigid core,and a damaged sheath.To scrutinize the buckling progression and corresponding deformation,axial compression and bending cyclic loads are introduced.The observations reveal that a reduction in axial compression results in a larger number of cycles before buckling ensues and progressively shifts the buckling position toward the extrados and fixed end.Decreasing the bending radius precipitates a reduction in the buckling cycle number and minimizes the deformation in the armor wire.Furthermore,an empirical model is presented to predict the occurrence of birdcage buckling,providing a means to anticipate buckling events and to estimate the requisite number of cycles leading to buckling.
基金supported by the Key Research and Development Program of Shaanxi Province(No.2024 GX-YBXM-178)the Shaanxi Province Qinchuangyuan“Scientists+Engineers”Team Development(No.2022KXJ032)。
文摘With the rapid development of flexible electronics,the tactile systems for object recognition are becoming increasingly delicate.This paper presents the design of a tactile glove for object recognition,integrating 243 palm pressure units and 126 finger joint strain units that are implemented by piezoresistive Velostat film.The palm pressure and joint bending strain data from the glove were collected using a two-dimensional resistance array scanning circuit and further converted into tactile images with a resolution of 32×32.To verify the effect of tactile data types on recognition precision,three datasets of tactile images were respectively built by palm pressure data,joint bending strain data,and a tactile data combing of both palm pressure and joint bending strain.An improved residual convolutional neural network(CNN)model,SP-ResNet,was developed by light-weighting ResNet-18 to classify these tactile images.Experimental results show that the data collection method combining palm pressure and joint bending strain demonstrates a 4.33%improvement in recognition precision compared to the best results obtained by using only palm pressure or joint bending strain.The recognition precision of 95.50%for 16 objects can be achieved by the presented tactile glove with SP-ResNet of less computation cost.The presented tactile system can serve as a sensing platform for intelligent prosthetics and robot grippers.
基金supported by the National Key R&D Program of China(Grant No.2022YFE0128300).
文摘The fracture behavior of natural fracture in the geological reservoir subjected to filling property,affects the crack initiation and propagation under stress perturbation.Partial filling flaws were intermediate between open fractures and filled fractures,the fracture response may be worth exploring.In this work,the effect of the filling property of sandstone with partial filling flaws on the fracture behavior was systematically investigated based on three-point bending tests and the numerical approach of discrete element method(DEM).In the laboratory,semi-circular three-point bending tests were carried out with partial filling flaws of various filling strengths.Based on this,numerical simulations were used to further investigate the effect of the filling ratio and the inclination of the partial filling flaw on the mechanical and fracture responses,and the effect of the partial filling flaw under mixed-mode loading on the fracture mechanism was elucidated coupled with acoustic emission(AE)characteristics.The obtained results showed that the increase in filling strength and filling ratio of partial filling flaw led to an increase in peak strength,with a decreasing trend in peak strength with the inclination of partial filling flaw.In terms of crack propagation pattern,the increasing filling strength of the partial filling flaw induced the transformation of the fracture mechanism toward deflection,with a tortuosity path,while the filling ratio and inclination of partial filling flaw led to fracture mechanism change from deflection to penetration and attraction,accompanied with a larger AE event source in filler.Accordingly,the b-value based on the Gutenberg-Richter equation fluctuated between 5 and 4 at low filling ratio and inclination and remained around 5 at high filling ratio and inclination of partial filling flaw.Related results may provide an application prospective for reservoir stimulation using the natural fracture system.
基金supported by the National Natural Science Foundation of China(Grant No.12204271)Shenzhen Science and Technology Program(Grant No.JCYJ20220530141014032)Guangdong Basic and Applied Basic Research Foundation program(Grant No.2022A1515011526),China.
文摘In the era of Metaverse and virtual reality(VR)/augmented reality(AR),capturing finger motion and force interactions is crucial for immersive human-machine interfaces.This study introduces a flexible electronic skin for the index finger,addressing coupled perception of both state and process in dynamic tactile sensing.The device integrates resistive and giant magnetoelastic sensors,enabling detection of surface pressure and finger joint bending.This e-skin identifies three phases of finger action:bending state,dynamic normal force and tangential force(sweeping).The system comprises resistive carbon nanotubes(CNT)/polydimethylsiloxane(PDMS)films for bending sensing and magnetoelastic sensors(NdFeB particles,EcoFlex,and flexible coils)for pressure detection.The inward bending resistive sensor,based on self-assembled microstructures,exhibits directional specificity with a response time under 120 ms and bending sensitivity from 0°to 120°.The magnetoelastic sensors demonstrate specific responses to frequency and deformation magnitude,as well as sensitivity to surface roughness during sliding and material hardness.The system’s capability is demonstrated through tactile-based bread type and condition recognition,achieving 92%accuracy.This intelligent patch shows broad potential in enhancing interactions across various fields,from VR/AR interfaces and medical diagnostics to smart manufacturing and industrial automation.
基金Sponsored by National Natural Science Foundation of China (Grant Nos.12272064 and 12101086)University Natural Science Research Project of Anhui Province (Grant No.KJ2018A0481)+2 种基金Major Project of Basic Science (Natural Science) Research in Jiangsu Universities (Grant Nos.22KJA460001,23KJA580001)Changzhou Science and Technology Plan Project (Grant No.CE20235049)Changzhou Leading Innovative Talents C ultivation Project (Grant No.CQ20220092).
文摘Two cross⁃sectional configurations of thin⁃walled square tubes partially filled with lightweight metallic foams are proposed,and termed as double⁃cell configuration partially filled with foam(DC⁃PF)and double⁃tube configuration partially filled with foam(DT⁃PF),respectively.The bending crashworthiness is investigated based on three⁃point bending tests using finite element ABAQUS/Explicit code.The two key mechanical indicators including Crash Load Efficiency(CLE)and Specific Energy Absorption(SEA)are introduced to evaluate the effect of foams in comparison with empty square tubes and fully filled square tubes.The numerical results show that the two partially filled configurations,especially DT⁃PF,display dramatically excellent bending crashworthiness compared with empty and fully filled square tubes.There exists a foam density threshold,beyond which the CLE of DT⁃PF achieves a maximum constant.In addition,there seems to be another foam density threshold,beyond which the SEA of DT⁃PF gets to the maximum value.It is also shown that the foam density threshold corresponding to the maximum SEA varies with the thickness of thin⁃walled square tubes.
基金Funded by the National Natural Science Foundation of China(Nos.52075347,51575364)the Natural Science Foundation of Liaoning Provincial(No.2022-MS-295)。
文摘Aiming at solve the difficulty and low dimensional accuracy in bending titanium alloy specimens at room temperature,we proposed a compound energy field(CEF)with laser and ultrasonic forming method.Through the conventional bending,laser-assisted energy field bending and CEF-assisted bending experiments on TC4 titanium alloy,the effects of bending force,laser-assisted energy field and CEF on the springback angle and fillet radius of TC4 titanium alloy specimens in V-shape bending were analyzed.The impact of the CEF-assisted bending process on the microstructure of TC4 titanium alloy was also investigated.The results show that CEF-assisted bending process has the advantages of high energy density,simple operation process and small influence area of the microstructure performances.It is effective in reducing the springback and fillet radius of bending specimens.Thus,CEF-assisted bending effectively improves the formability and surface quality of titanium alloy specimens.
基金Supported by National Key Research and Development Program of China(Grant No.2023YFB3711100)National Natural Science Foundation of China(Grant Nos.52275458,52275207)Tianjin Municipal Natural Science Foundation(Grant No.22JCZDJC00050)。
文摘Any product must undergo precise manufacturing before use.The damage incurred during the manufacturing process can significantly impact the residual strength of the product post-manufacturing.However,the relationship between residual bending strength and manufacturing-induced damage remains unclear,despite being a crucial parameter for assessing material service life and performance,leading to a decrease in product performance reliability.This study focuses on investigating the impact of crack generation on residual bending strength through theoretical and experimental analyses of scratching,grinding,and three-point bending.The research first elucidates the forms and mechanisms of material damage through scratch experiments.Subsequently,using resin-bonded and electroplated wheels as case studies,the influence of different process parameters on grinding damage and residual bending strength is explored.The reduction of brittle removal can lead to a 50%–60%decrease in residual bending strength.Lastly,a model is developed to delineate the relationship between processing parameters and the residual bending strength of the product,with the model exhibiting an error margin of less than 11%.This model clearly reveals the effect of crack generation under different process parameters on residual flexural strength.
