The bender element testing features its in-plane directivity, which allows using bender elements to measure the shear wave velocities in a wider range of in-plane configurations besides the standard tip-to-tip alignme...The bender element testing features its in-plane directivity, which allows using bender elements to measure the shear wave velocities in a wider range of in-plane configurations besides the standard tip-to-tip alignment. This paper proposed a novel bender element testing technique for measuring the horizontal shear wave velocity of soils, where the bender elements are surface- mounted and the axes of the source and receiver elements are parallel to each other. The preliminary tests performed on model ground of silica sand showed that, by properly determining the travel distance and time of the shear waves, the surface-mounted bender elements can perform as accurately as the conventional "tip-to-tip" configuration. Potentially, the present system provides a promising nondestructive tool for characterizing geomaterials and site conditions both in laboratory and in the fields.展开更多
Piezoelectric bender elements are widely used as electromechanical sensors and actuators, An analytical sandwich beam model for piezoelectric bender elements was developed based on the first-order shear deformation th...Piezoelectric bender elements are widely used as electromechanical sensors and actuators, An analytical sandwich beam model for piezoelectric bender elements was developed based on the first-order shear deformation theory （FSDT）, which assumes a single rotation angle for the whole cross-section and a quadratic distribution function for coupled electric potential in piezoelectric layers, and corrects the effect of transverse shear strain on the electric displacement integration. Free vibration analysis of simplysupported bender elements was carried out and the numerical results showed that, solutions of the present model for various thickness-to-length ratios are compared well with the exact two-dimensional solutions, which presents an efficient and accurate model for analyzing dynamic electromechanical responses of bender elements.展开更多
Spectral induced polarization(SIP)and bender element(BE)techniques show a high sensitivity to particle size,particle distribution and content of generated hydration products,which essentially govern the efficiency of ...Spectral induced polarization(SIP)and bender element(BE)techniques show a high sensitivity to particle size,particle distribution and content of generated hydration products,which essentially govern the efficiency of ground improvement.In this context,both SIP and BE were integrated on a column setup to monitor the processes of lime and cement stabilization.A 5 mmol/L Na2CO3 solution was injected into the sand-lime mixture to produce CaCO3 precipitation,while deionized water was injected into the sandcement mixture to induce the hydration of cement.The average diameters of the precipitated particles or clusters were calculated from the relaxation time,which was a significant parameter of SIP signals,via the Schwarz equation.Two pairs of BE were used to demonstrate the heterogeneity of the product precipitation,which was probably caused by the location of the inflow and outflow on the SIP-BE column.SIP and BE showed the capability of nondestructively monitoring the spatiotemporal chemical evolution processes,which could be helpful for engineering applications.展开更多
An analytical sandwich beam model for piezoelectric bender elements is derived based on the first-order shear deformation theory (FSDT), which assumes a single rotation angle for the whole cross-section and a quadrati...An analytical sandwich beam model for piezoelectric bender elements is derived based on the first-order shear deformation theory (FSDT), which assumes a single rotation angle for the whole cross-section and a quadratic distribution for coupled electric potential in piezoelectric layers. Shear coefficient is introduced to correct the effect of transverse shear strain on shear force and the electric displacement integration. Static and free vibration analyses of simply-supported bender elements are carried out for the sensor function. The results illustrate the high accuracy of the present model compared with the exact 2D solutions.展开更多
Recent studies using field case history data yielded new criteria for evaluating liquefaction potential in saturated granular deposits based on in situ, stress-corrected shear wave velocity. However, the conditions of...Recent studies using field case history data yielded new criteria for evaluating liquefaction potential in saturated granular deposits based on in situ, stress-corrected shear wave velocity. However, the conditions of relatively insufficient case histories and limited site conditions in this approach call for additional data to more reliably define liquefaction resistance as a function of shear wave velocity. In this study, a series of undrained cyclic triaxial tests were conducted on saturated sand with shear wave velocity Vs measured by bender element. By normalizing the data with respect to minimum void ratio, the test results, in-corporated with previously published laboratory data, statistically revealed good correlation of cyclic shear strength with small-strain shear modulus for sandy soils, which is almost irrespective of soil types and confining pressures. The consequently determined cyclic resistance ratio, CRR, was found to be approximately proportional to Vs4. Liquefaction resistance boundary curves were established by applying this relationship and compared to liquefaction criteria derived from seismic field measure-ments. Although in the range of Vs1>200 m/s the presented curves are moderately conservative, they are remarkably consistent with the published field performance criteria on the whole.展开更多
The moisture content of subgrade soil in seasonally frozen regions is often higher than its optimum value,leading to a decline in mechanical properties and a reduction in subgrade bearing capacity.Electro-osmosis has ...The moisture content of subgrade soil in seasonally frozen regions is often higher than its optimum value,leading to a decline in mechanical properties and a reduction in subgrade bearing capacity.Electro-osmosis has shown promise as a technology for controlling subgrade moisture,but significant heterogeneity has also been observed in treated soil.This study investigates the impact of electro-osmosis on soil stiffness through a series of bender element tests of compacted clay.The effects of dry density and supply voltage on the performance of electroosmosis treatment and the layered structure and anisotropy of the soil were analyzed.The results show that electro-osmosis treatment increased the shear wave velocity of the soil by 140% compared to untreated saturated soil and by 70% compared to soil with optimum water content.It has also been found that layered compaction of soil resulted in a layered structure,with electro-osmosis having a more prominent impact on soil near the cathode,resulting in a more pronounced layered structure.Besides,electro-osmosis was found to enhance soil anisotropy,particularly near the anode.Increasing the dry density and voltage levels can help improve soil uniformity.These findings provide insights into the potential use of electro-osmosis in improving soil stiffness,which could benefit various engineering applications.展开更多
Thawed permafrost could cause a serious stability problem for foundations and oil-wells in cold regions. A non-damage testing procedure, employing the Bender Element Method, was used for permafrost samples collected f...Thawed permafrost could cause a serious stability problem for foundations and oil-wells in cold regions. A non-damage testing procedure, employing the Bender Element Method, was used for permafrost samples collected from a continuous frozen core obtained from the North Slope of Alaska, USA. The wave velocity and modulus of thawed permafrost were investigated on various isotropic confining pressure from 0 kPa to 400 kPa per 100 kPa. The received shear wave propagation was recorded, and the elastic wave theory was used to calculate shear modulus. Finally, the shear modulus affected by confining pressure, water content and dry density were analyzed and discussed, and a regression formulation of shear modulus based on the Janbu Model for thawed silty and sandy permafrost were proposed and validation.展开更多
Liquefaction assessment based on strain energy is significantly superior to conventional stress-based methods.The main purpose of the present study is to investigate the correlation between shear wave velocity and str...Liquefaction assessment based on strain energy is significantly superior to conventional stress-based methods.The main purpose of the present study is to investigate the correlation between shear wave velocity and strain energy capacity of silty sands.The dissipated energy until liquefaction occurs was calculated by analyzing the results of three series of comprehensive cyclic direct simple shear and triaxial tests on Ottawa F65,Nevada,and Firoozkuh sands with varying silt content by weight and relative densities.Additionally,the shear wave velocity of each series was obtained using bender element or resonant column tests.Consequently,for the first time,a liquefaction triggering criterion,relating to effective overburden normalized liquefaction capacity energy(WL=s’c)to effective overburden stresscorrected shear wave velocity(eVs1)has been introduced.The accuracy of the proposed criteria was evaluated using in situ data.The results confirm the ability of shear wave velocity as a distinguishing parameter for separating liquefied and non-liquefied soils when it is calculated against liquefaction capacity energy(WL=s’c).However,the proposed WL=s’c-Vs1 curve,similar to previously proposed cyclic resistance ratio(CRR)-Vs1 relationships,should be used conservatively for fields vulnerable to liquefaction-induced lateral spreading.展开更多
基金Project supported by the National Basic Research Program (973) of China (No. 2007CB714203)the China Postdoctoral Science Foun-dation (No. 20080430219)partly supported by the Foundation for Seismological Researches, China Earthquake Administration (No. 200808022)
文摘The bender element testing features its in-plane directivity, which allows using bender elements to measure the shear wave velocities in a wider range of in-plane configurations besides the standard tip-to-tip alignment. This paper proposed a novel bender element testing technique for measuring the horizontal shear wave velocity of soils, where the bender elements are surface- mounted and the axes of the source and receiver elements are parallel to each other. The preliminary tests performed on model ground of silica sand showed that, by properly determining the travel distance and time of the shear waves, the surface-mounted bender elements can perform as accurately as the conventional "tip-to-tip" configuration. Potentially, the present system provides a promising nondestructive tool for characterizing geomaterials and site conditions both in laboratory and in the fields.
基金the National Natural Science Foundation of China(No.10472102)theNational Basic Research Program of China(No.2007CB714200)
文摘Piezoelectric bender elements are widely used as electromechanical sensors and actuators, An analytical sandwich beam model for piezoelectric bender elements was developed based on the first-order shear deformation theory （FSDT）, which assumes a single rotation angle for the whole cross-section and a quadratic distribution function for coupled electric potential in piezoelectric layers, and corrects the effect of transverse shear strain on the electric displacement integration. Free vibration analysis of simplysupported bender elements was carried out and the numerical results showed that, solutions of the present model for various thickness-to-length ratios are compared well with the exact two-dimensional solutions, which presents an efficient and accurate model for analyzing dynamic electromechanical responses of bender elements.
基金This research is sponsored by the Basic Science Center Program for Multiphase Evolution in Hypergravity of the National Natural Science Foundation of China(Grant No.51988101)Ministry of Science and Technology of China(Grant No.2019YFC1805002)Financial support from the Overseas Expertise Introduction Center for Discipline Innovation(Grant No.B18047)is also acknowledged.Insightful and constructive comments from the anonymous reviewers are sincerely appreciated,which helped improve the quality of this paper immensely.
文摘Spectral induced polarization(SIP)and bender element(BE)techniques show a high sensitivity to particle size,particle distribution and content of generated hydration products,which essentially govern the efficiency of ground improvement.In this context,both SIP and BE were integrated on a column setup to monitor the processes of lime and cement stabilization.A 5 mmol/L Na2CO3 solution was injected into the sand-lime mixture to produce CaCO3 precipitation,while deionized water was injected into the sandcement mixture to induce the hydration of cement.The average diameters of the precipitated particles or clusters were calculated from the relaxation time,which was a significant parameter of SIP signals,via the Schwarz equation.Two pairs of BE were used to demonstrate the heterogeneity of the product precipitation,which was probably caused by the location of the inflow and outflow on the SIP-BE column.SIP and BE showed the capability of nondestructively monitoring the spatiotemporal chemical evolution processes,which could be helpful for engineering applications.
基金Project supported by the National Natural Science Foundation of China (No. 10472102)the National Basic Research Program(973) of China (No. 2007CB714200)
文摘An analytical sandwich beam model for piezoelectric bender elements is derived based on the first-order shear deformation theory (FSDT), which assumes a single rotation angle for the whole cross-section and a quadratic distribution for coupled electric potential in piezoelectric layers. Shear coefficient is introduced to correct the effect of transverse shear strain on shear force and the electric displacement integration. Static and free vibration analyses of simply-supported bender elements are carried out for the sensor function. The results illustrate the high accuracy of the present model compared with the exact 2D solutions.
基金Project supported by the National Natural Science Foundation of China (No. 10372089), and Department of Education of Zhejiang Province (No. 20010572), China
文摘Recent studies using field case history data yielded new criteria for evaluating liquefaction potential in saturated granular deposits based on in situ, stress-corrected shear wave velocity. However, the conditions of relatively insufficient case histories and limited site conditions in this approach call for additional data to more reliably define liquefaction resistance as a function of shear wave velocity. In this study, a series of undrained cyclic triaxial tests were conducted on saturated sand with shear wave velocity Vs measured by bender element. By normalizing the data with respect to minimum void ratio, the test results, in-corporated with previously published laboratory data, statistically revealed good correlation of cyclic shear strength with small-strain shear modulus for sandy soils, which is almost irrespective of soil types and confining pressures. The consequently determined cyclic resistance ratio, CRR, was found to be approximately proportional to Vs4. Liquefaction resistance boundary curves were established by applying this relationship and compared to liquefaction criteria derived from seismic field measure-ments. Although in the range of Vs1>200 m/s the presented curves are moderately conservative, they are remarkably consistent with the published field performance criteria on the whole.
基金supported by the National Natural Science Foundation of China(No.41971076,No.42171128)。
文摘The moisture content of subgrade soil in seasonally frozen regions is often higher than its optimum value,leading to a decline in mechanical properties and a reduction in subgrade bearing capacity.Electro-osmosis has shown promise as a technology for controlling subgrade moisture,but significant heterogeneity has also been observed in treated soil.This study investigates the impact of electro-osmosis on soil stiffness through a series of bender element tests of compacted clay.The effects of dry density and supply voltage on the performance of electroosmosis treatment and the layered structure and anisotropy of the soil were analyzed.The results show that electro-osmosis treatment increased the shear wave velocity of the soil by 140% compared to untreated saturated soil and by 70% compared to soil with optimum water content.It has also been found that layered compaction of soil resulted in a layered structure,with electro-osmosis having a more prominent impact on soil near the cathode,resulting in a more pronounced layered structure.Besides,electro-osmosis was found to enhance soil anisotropy,particularly near the anode.Increasing the dry density and voltage levels can help improve soil uniformity.These findings provide insights into the potential use of electro-osmosis in improving soil stiffness,which could benefit various engineering applications.
基金the financial support from Conoco Phillips Alaska, Inc., BP Alaska, Exxon Mobil and Chevron
文摘Thawed permafrost could cause a serious stability problem for foundations and oil-wells in cold regions. A non-damage testing procedure, employing the Bender Element Method, was used for permafrost samples collected from a continuous frozen core obtained from the North Slope of Alaska, USA. The wave velocity and modulus of thawed permafrost were investigated on various isotropic confining pressure from 0 kPa to 400 kPa per 100 kPa. The received shear wave propagation was recorded, and the elastic wave theory was used to calculate shear modulus. Finally, the shear modulus affected by confining pressure, water content and dry density were analyzed and discussed, and a regression formulation of shear modulus based on the Janbu Model for thawed silty and sandy permafrost were proposed and validation.
文摘Liquefaction assessment based on strain energy is significantly superior to conventional stress-based methods.The main purpose of the present study is to investigate the correlation between shear wave velocity and strain energy capacity of silty sands.The dissipated energy until liquefaction occurs was calculated by analyzing the results of three series of comprehensive cyclic direct simple shear and triaxial tests on Ottawa F65,Nevada,and Firoozkuh sands with varying silt content by weight and relative densities.Additionally,the shear wave velocity of each series was obtained using bender element or resonant column tests.Consequently,for the first time,a liquefaction triggering criterion,relating to effective overburden normalized liquefaction capacity energy(WL=s’c)to effective overburden stresscorrected shear wave velocity(eVs1)has been introduced.The accuracy of the proposed criteria was evaluated using in situ data.The results confirm the ability of shear wave velocity as a distinguishing parameter for separating liquefied and non-liquefied soils when it is calculated against liquefaction capacity energy(WL=s’c).However,the proposed WL=s’c-Vs1 curve,similar to previously proposed cyclic resistance ratio(CRR)-Vs1 relationships,should be used conservatively for fields vulnerable to liquefaction-induced lateral spreading.
