Unmanned Aerial Vehicle(UAV)swarm collaboration enhances mission effectiveness.However,fixed-wing UAV swarm flights face collaborative safety control problems within a limited airspace in complex environments.Aimed at...Unmanned Aerial Vehicle(UAV)swarm collaboration enhances mission effectiveness.However,fixed-wing UAV swarm flights face collaborative safety control problems within a limited airspace in complex environments.Aimed at the cooperative control problem of fixed-wing UAV swarm flights under the airspace constraints of a virtual tube in a complex environment,this paper proposes a behavior-based distributed control method for fixed-wing UAV swarm considering flight safety constraints.Considering the fixed-wing UAV swarm flight problem in complex environment,a virtual tube model based on generator curve is established.The tube keeping,centerline tracking and flight safety behavioral control strategies of the UAV swarm are designed to ensure that the UAV swarm flies along the inside of the virtual tube safety and does not go beyond its boundary.On this basis,a maneuvering decision-making method based on behavioral fusion is proposed to ensure the safe flight of UAV swarm in the restricted airspace.This cooperative control method eliminates the need for respective pre-planned trajectories,reduces communication requirements,and achieves a high level of intelligence.Simulation results show that the proposed behaviorbased UAV swarm cooperative control method is able to make the fixed-wing UAV swarm,which is faster and unable to hover,fly along the virtual tube airspace under various virtual tube shapes and different swarm sizes,and the spacing between the UAVs is larger than the minimum safe distance during the flight.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
While different species in nature have safely solved the problem of navigation in a dynamic environment, this remains a challenging task for researchers around the world. The paper addresses the problem of autonomous ...While different species in nature have safely solved the problem of navigation in a dynamic environment, this remains a challenging task for researchers around the world. The paper addresses the problem of autonomous navigation in an unknown dynamic environment for a single and a group of three wheeled omnidirectional mobile robots(TWOMRs). The robot has to track a dynamic target while avoiding dynamic obstacles and dynamic walls in an unknown and very dense environment. It adopts a behavior-based controller that consists of four behaviors: "target tracking", "obstacle avoidance", "dynamic wall following" and "avoid robots". The paper considers the problem of kinematic saturation. In addition, it introduces a strategy for predicting the velocity of dynamic obstacles based on two successive measurements of the ultrasonic sensors to calculate the velocity of the obstacle expressed in the sensor frame. Furthermore, the paper proposes a strategy to deal with dynamic walls even when they have U-like or V-like shapes. The approach can also deal with the formation control of a group of robots based on the leader-follower structure and the behavior-based control, where the robots have to get together and maintain a given formation while navigating toward the target, avoiding obstacles and walls in a dynamic environment. The effectiveness of the proposed approaches is demonstrated via simulation.展开更多
Approaches to the study of formation keeping for multiple mobile robots are analyzed and a behavior-based robot model is built in this paper. And, a kind of coordination architecture is presented, which is similar to ...Approaches to the study of formation keeping for multiple mobile robots are analyzed and a behavior-based robot model is built in this paper. And, a kind of coordination architecture is presented, which is similar to the infantry squad organization and is used to realize multiple mobile robots to keep formations. Simulations verify the validity of the approach to keep formation, which combines the behavior-based method and formation feedback. The effects of formation feedback on the performance of the system are analyzed.展开更多
This paper discusses and compares some common architectures used inautonomous mobile robotics. Then it describes a behavior-based autonomous mobile robot that wasimplemented successfully in the Robotics Lab of the Dep...This paper discusses and compares some common architectures used inautonomous mobile robotics. Then it describes a behavior-based autonomous mobile robot that wasimplemented successfully in the Robotics Lab of the Department of Precision Mechanical Engineering.Fuzzy controller was used to implement the emergency behavior, the behaviors arbitration wasimplemented using the subsumption architecture. In an unknown dynamic indoor environment, the robotachieved real-time obstacle avoidance properties that are cruel for mobile robotics.展开更多
目的基于T2^(*)mapping定量分析业余马拉松运动员足踝部关节软骨的T2^(*)值,并分析其与性别、年龄、身体质量指数(body mass index,BMI)、跑龄、跑量之间的相关性。材料与方法于2023年7月份至2023年9月份招募重庆市长跑运动爱好者48名,...目的基于T2^(*)mapping定量分析业余马拉松运动员足踝部关节软骨的T2^(*)值,并分析其与性别、年龄、身体质量指数(body mass index,BMI)、跑龄、跑量之间的相关性。材料与方法于2023年7月份至2023年9月份招募重庆市长跑运动爱好者48名,其中跑量<300 km/月的36例(中低跑量组),跑量≥300 km/月的12例(高跑量组)。所有受试者均进行单侧无症状踝关节的MRI扫描,扫描序列包括T2^(*)mapping多回波自旋回波(spin echo,SE)序列矢状位、质子密度加权成像脂肪抑制(proton density-weighted imaging fat-saturated,PDWI-FS)序列矢状位、冠状位、横轴位以及T1加权脂肪抑制成像(T1-weighted imaging fat-saturated,T1WI-FS)序列横轴位。沿关节软骨轮廓边缘勾画距骨穹窿、跟骰关节跟骨面、骰骨面及后距下关节跟骨面、距骨面软骨作为感兴趣区(region of interest,ROI),获得相应的T2^(*)值。采用线性回归分析软骨T2^(*)值与年龄、BMI、跑龄的相关性,采用独立样本t检验分析不同跑量及不同性别间的软骨T2^(*)值差异。结果(1)距骨穹窿、跟骰关节跟骨面及骰骨面、后距下关节跟骨面及距骨面软骨T2^(*)值在性别上的差异均具有统计学意义(P=0.001、P<0.001、P=0.002、P=0.008、P=0.004);(2)高跑量组的距骨穹窿、后距下关节跟骨面软骨T2^(*)值高于中低跑量组(P=0.014、0.023),不同跑量的跟骰关节跟骨面及骰骨面、后距下关节距骨面软骨T2^(*)值的差异均无统计学意义(P=0.987、0.072、0.724);(3)距骨穹窿、跟骰关节跟骨面及骰骨面、后距下关节跟骨面、距骨面软骨T2^(*)值均与BMI呈正相关(r=0.376、0.384、0.300、0.422、0.455,P=0.005、0.004、0.019、0.001、0.001)。结论在业余马拉松运动员这一跑步群体中,与中低跑量相比,高跑量更有可能导致距骨穹窿、后距下关节跟骨面软骨损伤;而与较低的BMI相比,高BMI增加了距骨穹窿、跟骰关节跟骨面、骰骨面及后距下关节跟骨面、距骨面软骨损伤的风险。展开更多
Two limitations of current integrity measurement architectures are pointed out:(1)a reference value is required for every measured entity to verify the system states,as is impractical however;(2)malicious user can for...Two limitations of current integrity measurement architectures are pointed out:(1)a reference value is required for every measured entity to verify the system states,as is impractical however;(2)malicious user can forge proof of inexistent system states.This paper proposes a trustworthy integrity measurement architecture,BBACIMA,through enforcing behavior-based access control for trusted platform module(TPM).BBACIMA introduces a TPM reference monitor(TPMRM)to ensure the trustworthiness of integrity measurement.TPMRM enforces behavior-based access control for the TPM and is isolated from other entities which may be malicious.TPMRM is the only entity manipulating TPM directly and all PCR(platform configuration register)operation requests must pass through the security check of it so that only trusted processes can do measurement and produce the proof of system states.Through these mechanisms malicious user can not enforce attack which is feasible in current measurement architectures.展开更多
基金co-supported by the National Natural Science Foundation of China(No.61903350)the Ministry of Education industry-university-research innovation project,China(No.2021ZYA02002)the Beijing Institute of Technology Research Fund Program for Young Scholars,China(No.3010011182130)。
文摘Unmanned Aerial Vehicle(UAV)swarm collaboration enhances mission effectiveness.However,fixed-wing UAV swarm flights face collaborative safety control problems within a limited airspace in complex environments.Aimed at the cooperative control problem of fixed-wing UAV swarm flights under the airspace constraints of a virtual tube in a complex environment,this paper proposes a behavior-based distributed control method for fixed-wing UAV swarm considering flight safety constraints.Considering the fixed-wing UAV swarm flight problem in complex environment,a virtual tube model based on generator curve is established.The tube keeping,centerline tracking and flight safety behavioral control strategies of the UAV swarm are designed to ensure that the UAV swarm flies along the inside of the virtual tube safety and does not go beyond its boundary.On this basis,a maneuvering decision-making method based on behavioral fusion is proposed to ensure the safe flight of UAV swarm in the restricted airspace.This cooperative control method eliminates the need for respective pre-planned trajectories,reduces communication requirements,and achieves a high level of intelligence.Simulation results show that the proposed behaviorbased UAV swarm cooperative control method is able to make the fixed-wing UAV swarm,which is faster and unable to hover,fly along the virtual tube airspace under various virtual tube shapes and different swarm sizes,and the spacing between the UAVs is larger than the minimum safe distance during the flight.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
文摘While different species in nature have safely solved the problem of navigation in a dynamic environment, this remains a challenging task for researchers around the world. The paper addresses the problem of autonomous navigation in an unknown dynamic environment for a single and a group of three wheeled omnidirectional mobile robots(TWOMRs). The robot has to track a dynamic target while avoiding dynamic obstacles and dynamic walls in an unknown and very dense environment. It adopts a behavior-based controller that consists of four behaviors: "target tracking", "obstacle avoidance", "dynamic wall following" and "avoid robots". The paper considers the problem of kinematic saturation. In addition, it introduces a strategy for predicting the velocity of dynamic obstacles based on two successive measurements of the ultrasonic sensors to calculate the velocity of the obstacle expressed in the sensor frame. Furthermore, the paper proposes a strategy to deal with dynamic walls even when they have U-like or V-like shapes. The approach can also deal with the formation control of a group of robots based on the leader-follower structure and the behavior-based control, where the robots have to get together and maintain a given formation while navigating toward the target, avoiding obstacles and walls in a dynamic environment. The effectiveness of the proposed approaches is demonstrated via simulation.
文摘Approaches to the study of formation keeping for multiple mobile robots are analyzed and a behavior-based robot model is built in this paper. And, a kind of coordination architecture is presented, which is similar to the infantry squad organization and is used to realize multiple mobile robots to keep formations. Simulations verify the validity of the approach to keep formation, which combines the behavior-based method and formation feedback. The effects of formation feedback on the performance of the system are analyzed.
文摘This paper discusses and compares some common architectures used inautonomous mobile robotics. Then it describes a behavior-based autonomous mobile robot that wasimplemented successfully in the Robotics Lab of the Department of Precision Mechanical Engineering.Fuzzy controller was used to implement the emergency behavior, the behaviors arbitration wasimplemented using the subsumption architecture. In an unknown dynamic indoor environment, the robotachieved real-time obstacle avoidance properties that are cruel for mobile robotics.
基金the National High Technology Research and Development Plan of China(2007AA01Z412)the National Key Technology R&D Program of China(2006BAH02A02)the National Natural Science Foundation of China(60603017)
文摘Two limitations of current integrity measurement architectures are pointed out:(1)a reference value is required for every measured entity to verify the system states,as is impractical however;(2)malicious user can forge proof of inexistent system states.This paper proposes a trustworthy integrity measurement architecture,BBACIMA,through enforcing behavior-based access control for trusted platform module(TPM).BBACIMA introduces a TPM reference monitor(TPMRM)to ensure the trustworthiness of integrity measurement.TPMRM enforces behavior-based access control for the TPM and is isolated from other entities which may be malicious.TPMRM is the only entity manipulating TPM directly and all PCR(platform configuration register)operation requests must pass through the security check of it so that only trusted processes can do measurement and produce the proof of system states.Through these mechanisms malicious user can not enforce attack which is feasible in current measurement architectures.
