Bedding orientation measurement is a remote sensing application used in the field of geology, but the results are often unsatisfactory when the bed is dislocated along the strike direction. This paper proposes a new m...Bedding orientation measurement is a remote sensing application used in the field of geology, but the results are often unsatisfactory when the bed is dislocated along the strike direction. This paper proposes a new method called multiple-line method that is designed to improve bedding orientation measurement. This technique uses the bed as a vector, and fits the vectors as a plane to obtain the bedding orientation. This study employs the case of Yili Basin and measures 25 bedding orientations using the multiple-point and multiple-line methods, respectively. The result shows that the errors from the multiple-line method are mostly smaller than those from the multiple-point method when a bed is discontinuous.展开更多
To understand the evolution of stress-induced elastic wave anisotropy,three triaxial experiments were performed on sandstone specimens with bedding orientations parallel,perpendicular,and oblique to the maximum princi...To understand the evolution of stress-induced elastic wave anisotropy,three triaxial experiments were performed on sandstone specimens with bedding orientations parallel,perpendicular,and oblique to the maximum principal stress.P-wave velocities along 64 different directions on each specimen were monitored frequently to understand the anisotropy change at various stress levels by fitting Thomsen’s anisotropy equation.The results show that the elastic wave anisotropy is very sensitive to mechanical loading.Under hydrostatic loading,the magnitude of anisotropy is reduced in all three specimens.However,under deviatoric stress loading,the evolution of anisotropic characteristics(magnitude and orientation of the symmetry axis)is bedding orientation dependent.Anisotropy reversal occurs in specimens with bedding normal/oblique to the maximum principal stress.P-wave anisotropyε0 is linearly related to volumetric strain Sv and dilatancy,indicating that stress-induced redistribution of microcracks has a significant effect on P-wave velocity anisotropy.The closure of initial cracks and pores aligned in the bedding direction contributes to the decrease of the anisotropy.However,opening of new cracks,aligned in the maximum principal direction,accounts for the increase of the anisotropy.The experimental results provide some insights into the microstructural behavior under loading and provide an experimental basis for seismic data interpretation and parameter selection in engineering applications.展开更多
Developing low-permeability Coalbed Methane(CBM)reservoirs can significantly benefit from a comprehensive understanding of hydraulic fracture nucleation and propagation mechanisms,particularly in anthracite CBM reserv...Developing low-permeability Coalbed Methane(CBM)reservoirs can significantly benefit from a comprehensive understanding of hydraulic fracture nucleation and propagation mechanisms,particularly in anthracite CBM reservoirs.This study employs true-triaxial hydraulic fracturing experiments to investigate these mechanisms,with variables including injection flow rate,horizontal stress difference(σH-σh),and bedding orientation.Additionally,we conduct corresponding numerical cases to validate the experimental conclusions.The research also considers re-fracturing instances.For the first time,we utilize a combination of Kaiser tests and the stress transfer function in ANSYS Workbench finite element analysis to accurately restore the confining pressure of the coal sample.The findings suggest that a high initial injection flow rate during hydraulic fracturing can promote fluid leakage and aid in maintaining substantial fracture pressure.Enhanced fracturing efficiency can be achieved through higher injection rates,and it can ensure optimal fracturing efficiency,minimizing roof and floor fracturing in coal reservoirs to prevent fracturing fluid leakage.The presence of a high horizontal stress difference facilitates hydraulic fracture propagation along the direction of the maximum horizontal compressive stress,requiring a greater hydraulic pressure to produce more fracture systems in coal reservoirs.Additionally,a minor deviation in the wellbore injection direction from the bedding orientation assists in creating a complex hydraulic fractured network,although this also requires higher hydraulic pressure to initiate new fractures.In the case of multiple hydraulic fracturing,the second initiation pressure tends to be significantly higher than the first,indicating that a sequential increase in hydraulic pressure aids the formation of additional fractures.Moreover,a simplified numerical simulation has been conducted to corroborate the experimental findings.These insights are crucial in optimizing hydraulic fracturing processes to enhance the permeability of anthracite CBM reservoirs.展开更多
基金in part supported by the National Natural Science Foundation of China(Nos.41572316,41102131)the Guangdong Natural Science Foundation(No.2015A030313193)
文摘Bedding orientation measurement is a remote sensing application used in the field of geology, but the results are often unsatisfactory when the bed is dislocated along the strike direction. This paper proposes a new method called multiple-line method that is designed to improve bedding orientation measurement. This technique uses the bed as a vector, and fits the vectors as a plane to obtain the bedding orientation. This study employs the case of Yili Basin and measures 25 bedding orientations using the multiple-point and multiple-line methods, respectively. The result shows that the errors from the multiple-line method are mostly smaller than those from the multiple-point method when a bed is discontinuous.
基金The research was partially supported by the National Natural Science Foundation of China(Grant Nos.41902297,41872210)the Natural Science Foundation of Hubei Province(Grant No.2018CFB292)Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z017006).
文摘To understand the evolution of stress-induced elastic wave anisotropy,three triaxial experiments were performed on sandstone specimens with bedding orientations parallel,perpendicular,and oblique to the maximum principal stress.P-wave velocities along 64 different directions on each specimen were monitored frequently to understand the anisotropy change at various stress levels by fitting Thomsen’s anisotropy equation.The results show that the elastic wave anisotropy is very sensitive to mechanical loading.Under hydrostatic loading,the magnitude of anisotropy is reduced in all three specimens.However,under deviatoric stress loading,the evolution of anisotropic characteristics(magnitude and orientation of the symmetry axis)is bedding orientation dependent.Anisotropy reversal occurs in specimens with bedding normal/oblique to the maximum principal stress.P-wave anisotropyε0 is linearly related to volumetric strain Sv and dilatancy,indicating that stress-induced redistribution of microcracks has a significant effect on P-wave velocity anisotropy.The closure of initial cracks and pores aligned in the bedding direction contributes to the decrease of the anisotropy.However,opening of new cracks,aligned in the maximum principal direction,accounts for the increase of the anisotropy.The experimental results provide some insights into the microstructural behavior under loading and provide an experimental basis for seismic data interpretation and parameter selection in engineering applications.
基金funded by the National Natural Science Foundation of China(No.42202155)China Postdoctoral Science Foundation(No.2021MD703807)+7 种基金Heilongjiang Provincial Postdoctoral Science Foundation(No.LBH-Z20121)financial support from the China Scholarship Council(No.202008230018)the Research Fund Program of Hubei Key Laboratory of Resources and Eco-Environment Geology(No.HBREGKFJJ-202309)funding by the DGICYT Spanish Project(grant no.PID2020-118999GB-I00)funded by the MCIN/AEI/10.13039/501100011033funding by the Ramón y Cajal fellowship(grant no.RyC-2018-026335-I)funded by the MCIN/AEI/10.13039/50110001103the European Social Fund-Investing in Your Future.
文摘Developing low-permeability Coalbed Methane(CBM)reservoirs can significantly benefit from a comprehensive understanding of hydraulic fracture nucleation and propagation mechanisms,particularly in anthracite CBM reservoirs.This study employs true-triaxial hydraulic fracturing experiments to investigate these mechanisms,with variables including injection flow rate,horizontal stress difference(σH-σh),and bedding orientation.Additionally,we conduct corresponding numerical cases to validate the experimental conclusions.The research also considers re-fracturing instances.For the first time,we utilize a combination of Kaiser tests and the stress transfer function in ANSYS Workbench finite element analysis to accurately restore the confining pressure of the coal sample.The findings suggest that a high initial injection flow rate during hydraulic fracturing can promote fluid leakage and aid in maintaining substantial fracture pressure.Enhanced fracturing efficiency can be achieved through higher injection rates,and it can ensure optimal fracturing efficiency,minimizing roof and floor fracturing in coal reservoirs to prevent fracturing fluid leakage.The presence of a high horizontal stress difference facilitates hydraulic fracture propagation along the direction of the maximum horizontal compressive stress,requiring a greater hydraulic pressure to produce more fracture systems in coal reservoirs.Additionally,a minor deviation in the wellbore injection direction from the bedding orientation assists in creating a complex hydraulic fractured network,although this also requires higher hydraulic pressure to initiate new fractures.In the case of multiple hydraulic fracturing,the second initiation pressure tends to be significantly higher than the first,indicating that a sequential increase in hydraulic pressure aids the formation of additional fractures.Moreover,a simplified numerical simulation has been conducted to corroborate the experimental findings.These insights are crucial in optimizing hydraulic fracturing processes to enhance the permeability of anthracite CBM reservoirs.
