Effective fault identification is crucial for bearings, which are critical components of mechanical systems and play a pivotal role in ensuring overall safety and operational efficiency. Bearings operate under variabl...Effective fault identification is crucial for bearings, which are critical components of mechanical systems and play a pivotal role in ensuring overall safety and operational efficiency. Bearings operate under variable service conditions, and their diagnostic environments are complex and dynamic. In the process of bearing diagnosis, fault datasets are relatively scarce compared with datasets representing normal operating conditions. These challenges frequently cause the practicality of fault detection to decline, the extraction of fault features to be incomplete, and the diagnostic accuracy of many existing models to decrease. In this work, a transfer-learning framework, designated DSCNN-HA-TL, is introduced to address the enduring challenge of cross-condition diagnosis in rolling-bearing fault detection. The framework integrates a window global mixed attention mechanism with a deep separable convolutional network, thereby enabling adaptation to fault detection tasks under diverse operating conditions. First, a Convolutional Neural Network (CNN) is employed as the foundational architecture, where the original convolutional layers are enhanced through the incorporation of depthwise separable convolutions, resulting in a Depthwise Separable Convolutional Neural Network (DSCNN) architecture. Subsequently, the extraction of fault characteristics is further refined through a dual-branch network that integrates hybrid attention mechanisms, specifically windowed and global attention mechanisms. This approach enables the acquisition of multi-level feature fusion information, thereby enhancing the accuracy of fault classification. The integration of these features not only optimizes the characteristic extraction process but also yields improvements in accuracy, representational capacity, and robustness in fault feature recognition. In conclusion, the proposed method achieved average precisions of 99.93% and 99.55% in transfer learning tasks, as demonstrated by the experimental results obtained from the CWRU public dataset and the bearing fault detection platform dataset. The experimental findings further provided a detailed comparison between the diagnostic models before and after the enhancement, thereby substantiating the pronounced advantages of the DSCNN-HA-TL approach in accurately identifying faults in critical mechanical components under diverse operating conditions.展开更多
The capacity to diagnose faults in rolling bearings is of significant practical importance to ensure the normal operation of the equipment.Frequency-domain features can effectively enhance the identification of fault ...The capacity to diagnose faults in rolling bearings is of significant practical importance to ensure the normal operation of the equipment.Frequency-domain features can effectively enhance the identification of fault modes.However,existing methods often suffer from insufficient frequency-domain representation in practical applications,which greatly affects diagnostic performance.Therefore,this paper proposes a rolling bearing fault diagnosismethod based on aMulti-Scale FusionNetwork(MSFN)using the Time-Division Fourier Transform(TDFT).The method constructs multi-scale channels to extract time-domain and frequency-domain features of the signal in parallel.A multi-level,multi-scale filter-based approach is designed to extract frequency-domain features in a segmented manner.A cross-attention mechanism is introduced to facilitate the fusion of the extracted time-frequency domain features.The performance of the proposed method is validated using the CWRU and Ottawa datasets.The results show that the average accuracy of MSFN under complex noisy signals is 97.75%and 94.41%.The average accuracy under variable load conditions is 98.68%.This demonstrates its significant application potential compared to existing methods.展开更多
As smart manufacturing and Industry 4.0 continue to evolve,fault diagnosis of mechanical equipment has become crucial for ensuring production safety and optimizing equipment utilization.To address the challenge of cro...As smart manufacturing and Industry 4.0 continue to evolve,fault diagnosis of mechanical equipment has become crucial for ensuring production safety and optimizing equipment utilization.To address the challenge of cross-domain adaptation in intelligent diagnostic models under varying operational conditions,this paper introduces the CNN-1D-KAN model,which combines a 1D Convolutional Neural Network(1D-CNN)with a Kolmogorov–Arnold Network(KAN).The novelty of this approach lies in replacing the traditional 1D-CNN’s final fully connected layer with a KANLinear layer,leveraging KAN’s advanced nonlinear processing and function approximation capabilities while maintaining the simplicity of linear transformations.Experimental results on the CWRU dataset demonstrate that,under stable load conditions,the CNN-1D-KAN model achieves high accuracy,averaging 96.67%.Furthermore,the model exhibits strong transfer generalization and robustness across varying load conditions,sustaining an average accuracy of 90.21%.When compared to traditional neural networks(e.g.,1D-CNN and Multi-Layer Perceptron)and other domain adaptation models(e.g.,KAN Convolutions and KAN),the CNN-1D-KAN consistently outperforms in both accuracy and F1 scores across diverse load scenarios.Particularly in handling complex cross-domain data,it excels in diagnostic performance.This study provides an effective solution for cross-domain fault diagnosis in Industrial Internet systems,offering a theoretical foundation to enhance the reliability and stability of intelligent manufacturing processes,thus supporting the future advancement of industrial IoT applications.展开更多
Effective bearing fault diagnosis is vital for the safe and reliable operation of rotating machinery.In practical applications,bearings often work at various rotational speeds as well as load conditions.Yet,the bearin...Effective bearing fault diagnosis is vital for the safe and reliable operation of rotating machinery.In practical applications,bearings often work at various rotational speeds as well as load conditions.Yet,the bearing fault diagnosis under multiple conditions is a new subject,which needs to be further explored.Therefore,a multi-scale deep belief network(DBN)method integrated with attention mechanism is proposed for the purpose of extracting the multi-scale core features from vibration signals,containing four primary steps:preprocessing of multi-scale data,feature extraction,feature fusion,and fault classification.The key novelties include multi-scale feature extraction using multi-scale DBN algorithm,and feature fusion using attention mecha-nism.The benchmark dataset from University of Ottawa is applied to validate the effectiveness as well as advantages of this method.Furthermore,the aforementioned method is compared with four classical fault diagnosis methods reported in the literature,and the comparison results show that our pro-posed method has higher diagnostic accuracy and better robustness.展开更多
The stochastic resonance behavior of coupled stochastic resonance(SR)system with time-delay under mass and frequency fluctuations was studied.Firstly,the approximate system model of the time-delay system was obtained ...The stochastic resonance behavior of coupled stochastic resonance(SR)system with time-delay under mass and frequency fluctuations was studied.Firstly,the approximate system model of the time-delay system was obtained by the theory of small time-delay approximation.Then,the random average method and Shapiro-Loginov algorithm were used to calculate the output amplitude ratio of the two subsystems.The simulation analysis shows that increasing the time-delay and the input signal amplitude appropriately can improve the output response of the system.Finally,the system is applied to bearing fault diagnosis and compared with the stochastic resonance system with random mass and random frequency.The experimental results show that the coupled SR system taking into account the actual effect of time-delay and couple can more effectively extract the frequency of the fault signal,and thus realizing the diagnosis of the fault signal,which has important engineering application value.展开更多
Bearings are crucial components in rotating machines,which have direct effects on industrial productivity and safety.To fast and accurately identify the operating condition of bearings,a novel method based on multi⁃sc...Bearings are crucial components in rotating machines,which have direct effects on industrial productivity and safety.To fast and accurately identify the operating condition of bearings,a novel method based on multi⁃scale permutation entropy(MPE)and morphology similarity distance(MSD)is proposed in this paper.Firstly,the MPE values of the original signals were calculated to characterize the complexity in different scales and they constructed feature vectors after normalization.Then,the MSD was employed to measure the distance among test samples from different fault types and the reference samples,and achieved classification with the minimum MSD.Finally,the proposed method was verified with two experiments concerning artificially seeded damage bearings and run⁃to⁃failure bearings,respectively.Different categories were considered for the two experiments and high classification accuracies were obtained.The experimental results indicate that the proposed method is effective and feasible in bearing fault diagnosis.展开更多
In the research field of bearing fault diagnosis,classical deep learning models have the problems of too many parameters and high computing cost.In addition,the classical deep learning models are not effective in the ...In the research field of bearing fault diagnosis,classical deep learning models have the problems of too many parameters and high computing cost.In addition,the classical deep learning models are not effective in the scenario of small data.In recent years,deep forest is proposed,which has less hyper parameters and adaptive depth of deep model.In addition,weighted deep forest(WDF)is proposed to further improve deep forest by assigning weights for decisions trees based on the accuracy of each decision tree.In this paper,weighted deep forest model-based bearing fault diagnosis method(WDBM)is proposed.The WDBM is regard as a novel bearing fault diagnosis method,which not only inherits the WDF’s advantages-strong robustness,good generalization,less parameters,faster convergence speed and so on,but also realizes effective diagnosis with high precision and low cost under the condition of small samples.To verify the performance of the WDBM,experiments are carried out on Case Western Reserve University bearing data set(CWRU).Experiments results demonstrate that WDBM can achieve comparative recognition accuracy,with less computational overhead and faster convergence speed.展开更多
Aiming at the difficulty of rolling bearing fault diagnosis of wind turbine under noise environment,a new bearing fault identification method based on the Improved Anti-noise Residual Shrinkage Network(IADRSN)is propo...Aiming at the difficulty of rolling bearing fault diagnosis of wind turbine under noise environment,a new bearing fault identification method based on the Improved Anti-noise Residual Shrinkage Network(IADRSN)is proposed.Firstly,the vibration signals of wind turbine rolling bearings were preprocessed to obtain data samples divided into training and test sets.Then,a bearing fault diagnosis model based on the improved anti-noise residual shrinkage network was established.To improve the ability of fault feature extraction of the model,the convolution layer in the deep residual shrinkage network was replaced with a Dense-Net layer.To further improve the anti-noise ability of the model,the first layer of the model was set as the Drop-block layer.Finally,the labeled data samples were used for training model and the trained model was applied to the test set to output the fault diagnosis results.The results showed that the proposed method could achieve the fault diagnosis of wind turbine bearing more accurately in the high noise environment through comparison and verification.展开更多
Multisensor data fusionmethod can improve the accuracy of bearing fault diagnosis,in order to address the problems of single-sensor data types and the insufficient exploration of redundancy and complementarity between...Multisensor data fusionmethod can improve the accuracy of bearing fault diagnosis,in order to address the problems of single-sensor data types and the insufficient exploration of redundancy and complementarity between different modal data in most existing multisensor data fusion methods for bearing fault diagnosis,a bearing fault diagnosis method based on a Multiple-Constraint Modal-Invariant Graph Convolutional Fusion Network(MCMI-GCFN)is proposed in this paper.Firstly,a Convolutional Autoencoder(CAE)and Squeeze-and-Excitation Block(SE block)are used to extract features of raw current and vibration signals.Secondly,the model introduces source domain classifiers and domain discriminators to capture modal invariance between different modal data based on domain adversarial training,making use of the redundancy and complementarity between multimodal data.Then,the spatial aggregation property of Graph Convolutional Neural Networks(GCN)is utilized to capture the dependency relationship between current and vibration modes with similar time step features for accurately fusing contextual semantic information.Finally,the validation is conducted on the public bearing damage current and vibration dataset from Paderborn University.The experimental results showed that the delivered fusion method achieved a bearing fault diagnosis accuracy of 99.6%,which was about 9%–11.4%better than that with nonfusion methods.展开更多
Fault-related resonance frequency band extraction-based demodulation methods are widely used for bearing diagnostics.However,due to the high peaks of strong gear meshing interference,the classical band selection metho...Fault-related resonance frequency band extraction-based demodulation methods are widely used for bearing diagnostics.However,due to the high peaks of strong gear meshing interference,the classical band selection methods have poor performance and cannot work well for bearing fault type detection.As such,the CVRgram-based bearing fault diagnosis method is proposed in this paper.In the proposed method,inspired by the conditional variance(CV)index and root mean square(RMS),a novel index,named the CV/root mean square(CVR),is first proposed.The CVR index has high robustness for the interference of non-Gaussian or Gaussian noise and has the ability to determine the center frequency of the weak bearing fault-related resonance frequency band under strong interference.Secondly,motived by the Kurtogram,the CVRgram algorithm is developed for adaptively determining the optimal filtering parameters.Finally,the CVRgram-based bearing fault diagnosis method under strong gear meshing interference is proposed.The performance of the CVRgram-based method is verified by both the simulation signal and the experiment signal.The comparison analysis with the Kurtogram,Protrugram,and CVgram-based method shows that the proposed technique has a much better ability for bearing fault detection under strong noise interference.展开更多
Bearing fault diagnosis stands as a critical component in the maintenance of rotating machinery.Many prevalent deep learning techniques are tailored to Euclidean datasets such as audio,image,and video.However,these me...Bearing fault diagnosis stands as a critical component in the maintenance of rotating machinery.Many prevalent deep learning techniques are tailored to Euclidean datasets such as audio,image,and video.However,these methods falter when confronting non-Euclidean datasets,notably graph representations.In response,here we introduce an innovative approach harnessing the graph convolutional network(GCN)to analyze graph data derived from vibration signals related to bearing faults.This enhances the precision and reliability of fault diagnosis.Our methodology initiates by deriving a periodogram from the unprocessed vibration signals.Subsequently,this periodogram is mapped into a graph format,upon which the GCN is engaged for classification purposes.We substantiate the efficacy of our approach through rigorous experimental assessments conducted on a collection of ten bearing sets.Within these experiments,an accelerometer chronicles vibration signals across varying load conditions.We probe into the diagnostic accuracy rates across diverse loads and signal-to-noise ratios.Furthermore,a comparative evaluation of our method against several established algorithms delineated in this study is undertaken.Empirical observations confirm that our GCN-based strategy registers an elevated diagnostic accuracy quotient.展开更多
Difficulty in extracting nonlinear sparse impulse features due to variable speed conditions and redundant noise interference leads to challenges in diagnosing variable speed faults.Therefore,an improved spectral amplit...Difficulty in extracting nonlinear sparse impulse features due to variable speed conditions and redundant noise interference leads to challenges in diagnosing variable speed faults.Therefore,an improved spectral amplitude modulation(ISAM)based on sparse feature adaptive convolution(SFAC)is proposed to enhance the fault features under variable speed conditions.First,an optimal bi-damped wavelet construction method is proposed to learn signal impulse features,which selects the optimal bi-damped wavelet parameters with correlation criterion and particle swarm optimization.Second,a convolutional basis pursuit denoising model based on an optimal bi-damped wavelet is proposed for resolving sparse impulses.A model regularization parameter selection method based on weighted fault characteristic amplitude ratio assistance is proposed.Then,an ISAM method based on kurtosis threshold is proposed to further enhance the fault information of sparse signal.Finally,the type of variable speed faults is determined by order spectrum analysis.Various experimental results,such as spectral amplitude modulation and Morlet wavelet matching,verify the effectiveness and advantages of the ISAM-SFAC method.展开更多
Roller bearing failure is one of the most common faults in rotating machines.Various techniques for bearing fault diagnosis based on faults feature extraction have been proposed.But feature extraction from fault signa...Roller bearing failure is one of the most common faults in rotating machines.Various techniques for bearing fault diagnosis based on faults feature extraction have been proposed.But feature extraction from fault signals requires expert prior information and human labour.Recently,deep learning algorithms have been applied extensively in the condition monitoring of rotating machines to learn features automatically from the input data.Given its robust performance in image recognition,the convolutional neural network(CNN)architecture has been widely used to learn automatically discriminative features from vibration images and classify health conditions.This paper proposes and evaluates a two-stage method RGBVI-CNN for roller bearings fault diagnosis.The first stage in the proposed method is to generate the RGB vibration images(RGBVIs)from the input vibration signals.To begin this process,first,the 1-D vibration signals were converted to 2-D grayscale vibration Images.Once the conversion was completed,the regions of interest(ROI)were found in the converted 2-D grayscale vibration images.Finally,to produce vibration images with more discriminative characteristics,an algorithm was applied to the 2-D grayscale vibration images to produce connected components-based RGB vibration images(RGBVIs)with sets of colours and texture features.In the second stage,with these RGBVIs a CNN-based architecture was employed to learn automatically features from the RGBVIs and to classify bearing health conditions.Two cases of fault classification of rolling element bearings are used to validate the proposed method.Experimental results of this investigation demonstrate that RGBVI-CNN can generate advantageous health condition features from bearing vibration signals and classify the health conditions under different working loads with high accuracy.Moreover,several classification models trained using RGBVI-CNN offered high performance in the testing results of the overall classification accuracy,precision,recall,and F-score.展开更多
Deep neural networks have been widely applied to bearing fault diagnosis systems and achieved impressive success recently.To address the problem that the insufficient fault feature extraction ability of traditional fa...Deep neural networks have been widely applied to bearing fault diagnosis systems and achieved impressive success recently.To address the problem that the insufficient fault feature extraction ability of traditional fault diagnosis methods results in poor diagnosis effect under variable load and noise interference scenarios,a rolling bearing fault diagnosis model combining Multi-Scale Convolutional Neural Network(MSCNN)and Long Short-Term Memory(LSTM)fused with attention mechanism is proposed.To adaptively extract the essential spatial feature information of various sizes,the model creates a multi-scale feature extraction module using the convolutional neural network(CNN)learning process.The learning capacity of LSTM for time information sequence is then used to extract the vibration signal’s temporal feature information.Two parallel large and small convolutional kernels teach the system spatial local features.LSTM gathers temporal global features to thoroughly and painstakingly mine the vibration signal’s characteristics,thus enhancing model generalization.Lastly,bearing fault diagnosis is accomplished by using the SoftMax classifier.The experiment outcomes demonstrate that the model can derive fault properties entirely from the initial vibration signal.It can retain good diagnostic accuracy under variable load and noise interference and has strong generalization compared to other fault diagnosis models.展开更多
Morlet wavelet is suitable to extract the impulse components of mechanical fault signals. And thus its continuous wavelet transform （CWT） has been successfully used in the field of fault diagnosis. The principle of ...Morlet wavelet is suitable to extract the impulse components of mechanical fault signals. And thus its continuous wavelet transform （CWT） has been successfully used in the field of fault diagnosis. The principle of scale selection in CWT is discussed. Based on genetic algorithm, an optimization strategy for the waveform parameters of the mother wavelet is proposed with wavelet entropy as the optimization target. Based on the optimized waveform parameters, the wavelet scalogram is used to analyze the simulated acoustic emission （AE） signal and real AE signal of rolling bearing. The results indicate that the proposed method is useful and efficient to improve the quality of CWT.展开更多
Wavelet denoising is an effective approach to extract fault features from strong background noise.It has been widely used in mechanical fault detection and shown excellent performance.However,traditional thresholds ar...Wavelet denoising is an effective approach to extract fault features from strong background noise.It has been widely used in mechanical fault detection and shown excellent performance.However,traditional thresholds are not suitable for nonstationary signal denoising because they set universal thresholds for different wavelet coefficients.Therefore,a data-driven threshold strategy is proposed in this paper.First,the signal is decomposed into different subbands by wavelet transformation.Then a data-driven threshold is derived by estimating the noise power spectral density in different subbands.Since the data-driven threshold is dependent on the noise estimation and adapted to data,it is more robust and accurate for denoising than traditional thresholds.Meanwhile,sliding window method is adopted to set a flexible local threshold.When this method was applied to simulation signal and an inner race fault diagnostic case of dedusting fan bearing,the proposed method has good result and provides valuable advantages over traditional methods in the fault detection of rotating machines.展开更多
基金supported by the National Natural Science Foundation of China(12272259)the Key Research and Development Fund of Universities in Hebei Province(2510800601A).
文摘Effective fault identification is crucial for bearings, which are critical components of mechanical systems and play a pivotal role in ensuring overall safety and operational efficiency. Bearings operate under variable service conditions, and their diagnostic environments are complex and dynamic. In the process of bearing diagnosis, fault datasets are relatively scarce compared with datasets representing normal operating conditions. These challenges frequently cause the practicality of fault detection to decline, the extraction of fault features to be incomplete, and the diagnostic accuracy of many existing models to decrease. In this work, a transfer-learning framework, designated DSCNN-HA-TL, is introduced to address the enduring challenge of cross-condition diagnosis in rolling-bearing fault detection. The framework integrates a window global mixed attention mechanism with a deep separable convolutional network, thereby enabling adaptation to fault detection tasks under diverse operating conditions. First, a Convolutional Neural Network (CNN) is employed as the foundational architecture, where the original convolutional layers are enhanced through the incorporation of depthwise separable convolutions, resulting in a Depthwise Separable Convolutional Neural Network (DSCNN) architecture. Subsequently, the extraction of fault characteristics is further refined through a dual-branch network that integrates hybrid attention mechanisms, specifically windowed and global attention mechanisms. This approach enables the acquisition of multi-level feature fusion information, thereby enhancing the accuracy of fault classification. The integration of these features not only optimizes the characteristic extraction process but also yields improvements in accuracy, representational capacity, and robustness in fault feature recognition. In conclusion, the proposed method achieved average precisions of 99.93% and 99.55% in transfer learning tasks, as demonstrated by the experimental results obtained from the CWRU public dataset and the bearing fault detection platform dataset. The experimental findings further provided a detailed comparison between the diagnostic models before and after the enhancement, thereby substantiating the pronounced advantages of the DSCNN-HA-TL approach in accurately identifying faults in critical mechanical components under diverse operating conditions.
基金fully supported by the Frontier Exploration Projects of Longmen Laboratory(No.LMQYTSKT034)Key Research and Development and Promotion of Special(Science and Technology)Project of Henan Province,China(No.252102210158)。
文摘The capacity to diagnose faults in rolling bearings is of significant practical importance to ensure the normal operation of the equipment.Frequency-domain features can effectively enhance the identification of fault modes.However,existing methods often suffer from insufficient frequency-domain representation in practical applications,which greatly affects diagnostic performance.Therefore,this paper proposes a rolling bearing fault diagnosismethod based on aMulti-Scale FusionNetwork(MSFN)using the Time-Division Fourier Transform(TDFT).The method constructs multi-scale channels to extract time-domain and frequency-domain features of the signal in parallel.A multi-level,multi-scale filter-based approach is designed to extract frequency-domain features in a segmented manner.A cross-attention mechanism is introduced to facilitate the fusion of the extracted time-frequency domain features.The performance of the proposed method is validated using the CWRU and Ottawa datasets.The results show that the average accuracy of MSFN under complex noisy signals is 97.75%and 94.41%.The average accuracy under variable load conditions is 98.68%.This demonstrates its significant application potential compared to existing methods.
基金supported by the Science and Technology Research Program of Chongqing Municipal Education Commission(Grant Nos.KJQN202100812,KJQN202215901,KJQN202400812).
文摘As smart manufacturing and Industry 4.0 continue to evolve,fault diagnosis of mechanical equipment has become crucial for ensuring production safety and optimizing equipment utilization.To address the challenge of cross-domain adaptation in intelligent diagnostic models under varying operational conditions,this paper introduces the CNN-1D-KAN model,which combines a 1D Convolutional Neural Network(1D-CNN)with a Kolmogorov–Arnold Network(KAN).The novelty of this approach lies in replacing the traditional 1D-CNN’s final fully connected layer with a KANLinear layer,leveraging KAN’s advanced nonlinear processing and function approximation capabilities while maintaining the simplicity of linear transformations.Experimental results on the CWRU dataset demonstrate that,under stable load conditions,the CNN-1D-KAN model achieves high accuracy,averaging 96.67%.Furthermore,the model exhibits strong transfer generalization and robustness across varying load conditions,sustaining an average accuracy of 90.21%.When compared to traditional neural networks(e.g.,1D-CNN and Multi-Layer Perceptron)and other domain adaptation models(e.g.,KAN Convolutions and KAN),the CNN-1D-KAN consistently outperforms in both accuracy and F1 scores across diverse load scenarios.Particularly in handling complex cross-domain data,it excels in diagnostic performance.This study provides an effective solution for cross-domain fault diagnosis in Industrial Internet systems,offering a theoretical foundation to enhance the reliability and stability of intelligent manufacturing processes,thus supporting the future advancement of industrial IoT applications.
基金supported by the National Natural Science Foundation of China(62020106003,61873122,62303217)Aero Engine Corporation of China Industry-university-research Cooperation Project(HFZL2020CXY011)the Research Fund of State Key Laboratory of Mechanics and Control of Mechanical Structures(Nanjing University of Aeronautics and Astronautics)(MCMS-I-0121G03).
文摘Effective bearing fault diagnosis is vital for the safe and reliable operation of rotating machinery.In practical applications,bearings often work at various rotational speeds as well as load conditions.Yet,the bearing fault diagnosis under multiple conditions is a new subject,which needs to be further explored.Therefore,a multi-scale deep belief network(DBN)method integrated with attention mechanism is proposed for the purpose of extracting the multi-scale core features from vibration signals,containing four primary steps:preprocessing of multi-scale data,feature extraction,feature fusion,and fault classification.The key novelties include multi-scale feature extraction using multi-scale DBN algorithm,and feature fusion using attention mecha-nism.The benchmark dataset from University of Ottawa is applied to validate the effectiveness as well as advantages of this method.Furthermore,the aforementioned method is compared with four classical fault diagnosis methods reported in the literature,and the comparison results show that our pro-posed method has higher diagnostic accuracy and better robustness.
基金Project(61771085)supported by the National Natural Science Foundation of ChinaProject(KJQN 201900601)supported by the Research Project of Chongqing Educational Commission,China。
文摘The stochastic resonance behavior of coupled stochastic resonance(SR)system with time-delay under mass and frequency fluctuations was studied.Firstly,the approximate system model of the time-delay system was obtained by the theory of small time-delay approximation.Then,the random average method and Shapiro-Loginov algorithm were used to calculate the output amplitude ratio of the two subsystems.The simulation analysis shows that increasing the time-delay and the input signal amplitude appropriately can improve the output response of the system.Finally,the system is applied to bearing fault diagnosis and compared with the stochastic resonance system with random mass and random frequency.The experimental results show that the coupled SR system taking into account the actual effect of time-delay and couple can more effectively extract the frequency of the fault signal,and thus realizing the diagnosis of the fault signal,which has important engineering application value.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51505100)
文摘Bearings are crucial components in rotating machines,which have direct effects on industrial productivity and safety.To fast and accurately identify the operating condition of bearings,a novel method based on multi⁃scale permutation entropy(MPE)and morphology similarity distance(MSD)is proposed in this paper.Firstly,the MPE values of the original signals were calculated to characterize the complexity in different scales and they constructed feature vectors after normalization.Then,the MSD was employed to measure the distance among test samples from different fault types and the reference samples,and achieved classification with the minimum MSD.Finally,the proposed method was verified with two experiments concerning artificially seeded damage bearings and run⁃to⁃failure bearings,respectively.Different categories were considered for the two experiments and high classification accuracies were obtained.The experimental results indicate that the proposed method is effective and feasible in bearing fault diagnosis.
基金:The work is supported by the National Key R&D Program of China(No.2021YFB2700500,2021YFB2700503).Tao Wang received the grant and the URLs to sponsors’websites is https://service.most.gov.cn/.
文摘In the research field of bearing fault diagnosis,classical deep learning models have the problems of too many parameters and high computing cost.In addition,the classical deep learning models are not effective in the scenario of small data.In recent years,deep forest is proposed,which has less hyper parameters and adaptive depth of deep model.In addition,weighted deep forest(WDF)is proposed to further improve deep forest by assigning weights for decisions trees based on the accuracy of each decision tree.In this paper,weighted deep forest model-based bearing fault diagnosis method(WDBM)is proposed.The WDBM is regard as a novel bearing fault diagnosis method,which not only inherits the WDF’s advantages-strong robustness,good generalization,less parameters,faster convergence speed and so on,but also realizes effective diagnosis with high precision and low cost under the condition of small samples.To verify the performance of the WDBM,experiments are carried out on Case Western Reserve University bearing data set(CWRU).Experiments results demonstrate that WDBM can achieve comparative recognition accuracy,with less computational overhead and faster convergence speed.
文摘Aiming at the difficulty of rolling bearing fault diagnosis of wind turbine under noise environment,a new bearing fault identification method based on the Improved Anti-noise Residual Shrinkage Network(IADRSN)is proposed.Firstly,the vibration signals of wind turbine rolling bearings were preprocessed to obtain data samples divided into training and test sets.Then,a bearing fault diagnosis model based on the improved anti-noise residual shrinkage network was established.To improve the ability of fault feature extraction of the model,the convolution layer in the deep residual shrinkage network was replaced with a Dense-Net layer.To further improve the anti-noise ability of the model,the first layer of the model was set as the Drop-block layer.Finally,the labeled data samples were used for training model and the trained model was applied to the test set to output the fault diagnosis results.The results showed that the proposed method could achieve the fault diagnosis of wind turbine bearing more accurately in the high noise environment through comparison and verification.
基金supported by the National Key R&D Program of China(2021YFF0501101)the Youth Project of Hunan Provincial Department of Education(22B0586)the Education Reform Project of Hunan Provincial Department of Education(2022JGYB186).
文摘Multisensor data fusionmethod can improve the accuracy of bearing fault diagnosis,in order to address the problems of single-sensor data types and the insufficient exploration of redundancy and complementarity between different modal data in most existing multisensor data fusion methods for bearing fault diagnosis,a bearing fault diagnosis method based on a Multiple-Constraint Modal-Invariant Graph Convolutional Fusion Network(MCMI-GCFN)is proposed in this paper.Firstly,a Convolutional Autoencoder(CAE)and Squeeze-and-Excitation Block(SE block)are used to extract features of raw current and vibration signals.Secondly,the model introduces source domain classifiers and domain discriminators to capture modal invariance between different modal data based on domain adversarial training,making use of the redundancy and complementarity between multimodal data.Then,the spatial aggregation property of Graph Convolutional Neural Networks(GCN)is utilized to capture the dependency relationship between current and vibration modes with similar time step features for accurately fusing contextual semantic information.Finally,the validation is conducted on the public bearing damage current and vibration dataset from Paderborn University.The experimental results showed that the delivered fusion method achieved a bearing fault diagnosis accuracy of 99.6%,which was about 9%–11.4%better than that with nonfusion methods.
基金supported by the National Natural Science Foundation of China (Grant Nos.52075008,51905292)。
文摘Fault-related resonance frequency band extraction-based demodulation methods are widely used for bearing diagnostics.However,due to the high peaks of strong gear meshing interference,the classical band selection methods have poor performance and cannot work well for bearing fault type detection.As such,the CVRgram-based bearing fault diagnosis method is proposed in this paper.In the proposed method,inspired by the conditional variance(CV)index and root mean square(RMS),a novel index,named the CV/root mean square(CVR),is first proposed.The CVR index has high robustness for the interference of non-Gaussian or Gaussian noise and has the ability to determine the center frequency of the weak bearing fault-related resonance frequency band under strong interference.Secondly,motived by the Kurtogram,the CVRgram algorithm is developed for adaptively determining the optimal filtering parameters.Finally,the CVRgram-based bearing fault diagnosis method under strong gear meshing interference is proposed.The performance of the CVRgram-based method is verified by both the simulation signal and the experiment signal.The comparison analysis with the Kurtogram,Protrugram,and CVgram-based method shows that the proposed technique has a much better ability for bearing fault detection under strong noise interference.
文摘Bearing fault diagnosis stands as a critical component in the maintenance of rotating machinery.Many prevalent deep learning techniques are tailored to Euclidean datasets such as audio,image,and video.However,these methods falter when confronting non-Euclidean datasets,notably graph representations.In response,here we introduce an innovative approach harnessing the graph convolutional network(GCN)to analyze graph data derived from vibration signals related to bearing faults.This enhances the precision and reliability of fault diagnosis.Our methodology initiates by deriving a periodogram from the unprocessed vibration signals.Subsequently,this periodogram is mapped into a graph format,upon which the GCN is engaged for classification purposes.We substantiate the efficacy of our approach through rigorous experimental assessments conducted on a collection of ten bearing sets.Within these experiments,an accelerometer chronicles vibration signals across varying load conditions.We probe into the diagnostic accuracy rates across diverse loads and signal-to-noise ratios.Furthermore,a comparative evaluation of our method against several established algorithms delineated in this study is undertaken.Empirical observations confirm that our GCN-based strategy registers an elevated diagnostic accuracy quotient.
基金funded by the National Natural Science Foundation of China(grant nos.52475084 and 52375076)the Postdoctoral Fellowship Program of CPSF(grant no.GZC20230202).
文摘Difficulty in extracting nonlinear sparse impulse features due to variable speed conditions and redundant noise interference leads to challenges in diagnosing variable speed faults.Therefore,an improved spectral amplitude modulation(ISAM)based on sparse feature adaptive convolution(SFAC)is proposed to enhance the fault features under variable speed conditions.First,an optimal bi-damped wavelet construction method is proposed to learn signal impulse features,which selects the optimal bi-damped wavelet parameters with correlation criterion and particle swarm optimization.Second,a convolutional basis pursuit denoising model based on an optimal bi-damped wavelet is proposed for resolving sparse impulses.A model regularization parameter selection method based on weighted fault characteristic amplitude ratio assistance is proposed.Then,an ISAM method based on kurtosis threshold is proposed to further enhance the fault information of sparse signal.Finally,the type of variable speed faults is determined by order spectrum analysis.Various experimental results,such as spectral amplitude modulation and Morlet wavelet matching,verify the effectiveness and advantages of the ISAM-SFAC method.
文摘Roller bearing failure is one of the most common faults in rotating machines.Various techniques for bearing fault diagnosis based on faults feature extraction have been proposed.But feature extraction from fault signals requires expert prior information and human labour.Recently,deep learning algorithms have been applied extensively in the condition monitoring of rotating machines to learn features automatically from the input data.Given its robust performance in image recognition,the convolutional neural network(CNN)architecture has been widely used to learn automatically discriminative features from vibration images and classify health conditions.This paper proposes and evaluates a two-stage method RGBVI-CNN for roller bearings fault diagnosis.The first stage in the proposed method is to generate the RGB vibration images(RGBVIs)from the input vibration signals.To begin this process,first,the 1-D vibration signals were converted to 2-D grayscale vibration Images.Once the conversion was completed,the regions of interest(ROI)were found in the converted 2-D grayscale vibration images.Finally,to produce vibration images with more discriminative characteristics,an algorithm was applied to the 2-D grayscale vibration images to produce connected components-based RGB vibration images(RGBVIs)with sets of colours and texture features.In the second stage,with these RGBVIs a CNN-based architecture was employed to learn automatically features from the RGBVIs and to classify bearing health conditions.Two cases of fault classification of rolling element bearings are used to validate the proposed method.Experimental results of this investigation demonstrate that RGBVI-CNN can generate advantageous health condition features from bearing vibration signals and classify the health conditions under different working loads with high accuracy.Moreover,several classification models trained using RGBVI-CNN offered high performance in the testing results of the overall classification accuracy,precision,recall,and F-score.
文摘Deep neural networks have been widely applied to bearing fault diagnosis systems and achieved impressive success recently.To address the problem that the insufficient fault feature extraction ability of traditional fault diagnosis methods results in poor diagnosis effect under variable load and noise interference scenarios,a rolling bearing fault diagnosis model combining Multi-Scale Convolutional Neural Network(MSCNN)and Long Short-Term Memory(LSTM)fused with attention mechanism is proposed.To adaptively extract the essential spatial feature information of various sizes,the model creates a multi-scale feature extraction module using the convolutional neural network(CNN)learning process.The learning capacity of LSTM for time information sequence is then used to extract the vibration signal’s temporal feature information.Two parallel large and small convolutional kernels teach the system spatial local features.LSTM gathers temporal global features to thoroughly and painstakingly mine the vibration signal’s characteristics,thus enhancing model generalization.Lastly,bearing fault diagnosis is accomplished by using the SoftMax classifier.The experiment outcomes demonstrate that the model can derive fault properties entirely from the initial vibration signal.It can retain good diagnostic accuracy under variable load and noise interference and has strong generalization compared to other fault diagnosis models.
基金This project is supported by National Natural Science Foundation of China (No. 50105007)Program for New Century Excellent Talents in University, China.
文摘Morlet wavelet is suitable to extract the impulse components of mechanical fault signals. And thus its continuous wavelet transform （CWT） has been successfully used in the field of fault diagnosis. The principle of scale selection in CWT is discussed. Based on genetic algorithm, an optimization strategy for the waveform parameters of the mother wavelet is proposed with wavelet entropy as the optimization target. Based on the optimized waveform parameters, the wavelet scalogram is used to analyze the simulated acoustic emission （AE） signal and real AE signal of rolling bearing. The results indicate that the proposed method is useful and efficient to improve the quality of CWT.
基金supported by the National Natural Science Foundation of China(Grant No.51275384)the Key project of National Natural Science Foundation of China(Grant No.51035007)+1 种基金the National Basic Research Program of China("973"Project)(Grant No.2011CB706805)the Specialized Research Fund for the Doctoral Program of Higher Education(Grant No.20110201130001)
文摘Wavelet denoising is an effective approach to extract fault features from strong background noise.It has been widely used in mechanical fault detection and shown excellent performance.However,traditional thresholds are not suitable for nonstationary signal denoising because they set universal thresholds for different wavelet coefficients.Therefore,a data-driven threshold strategy is proposed in this paper.First,the signal is decomposed into different subbands by wavelet transformation.Then a data-driven threshold is derived by estimating the noise power spectral density in different subbands.Since the data-driven threshold is dependent on the noise estimation and adapted to data,it is more robust and accurate for denoising than traditional thresholds.Meanwhile,sliding window method is adopted to set a flexible local threshold.When this method was applied to simulation signal and an inner race fault diagnostic case of dedusting fan bearing,the proposed method has good result and provides valuable advantages over traditional methods in the fault detection of rotating machines.
