The analytic formulae of probability distribution of spiral plane modes for the Whittaker-Gaussian （WG） beams with orbital angular momentum （OAM） in strong turbulence regime are modeled based on the modified Rytov...The analytic formulae of probability distribution of spiral plane modes for the Whittaker-Gaussian （WG） beams with orbital angular momentum （OAM） in strong turbulence regime are modeled based on the modified Rytov approximation. Numerical results show that the erosstalk range of OAM modes in the vicinity of signal mode increases with the increasing refractive-index construction parameter. However, effects of change of the width of the Gaussian envelope and the parameter Wo of WG beams on normalization energy weight of signal mode can be ignored. We find theoretically that signal spiral plane mode of WG beams at each OAM level approximatively has the same normalization energy weight, implying that the channels with WG （pseudo non-diffraction） beam have higher channel capacity than the channels with the Laguerre-Gaussian beam.展开更多
The superposition of basic non-diffracting beams triggered new research hotspots lately,laying opportunities for long-distance wireless optical communication.The Lommel-Gaussian(LMG)beam formed by the superposition of...The superposition of basic non-diffracting beams triggered new research hotspots lately,laying opportunities for long-distance wireless optical communication.The Lommel-Gaussian(LMG)beam formed by the superposition of Bessel-Gaussian light not only possesses non-diffraction feature,but also has tunable symmetry.With the help of Poynting vector analysis,we observed a smaller radial energy flow component during the propagation of the high order symmetrical LMG beam,which allows it to maintain the original beam profile over long distance.Thanks to the energy oscillation of the mainlobe and sidelobes,the mainlobe blocked by the symmetrical LMG beam can be restored.Also,the random phase screen with angular spectrum method is used to describe the beam behaviors in turbulence.The results show that the symmetry LMG is preferred in free space optical communication,and the asymmetric LMG performs poorly due to asymmetric energy transfer.展开更多
An elliptical Gaussian wave formalism model of a charged-particle beam is proposed by analogy with an elliptical Gaussian light beam. In the paraxial approximation, the charged-particle beam can be described as a whol...An elliptical Gaussian wave formalism model of a charged-particle beam is proposed by analogy with an elliptical Gaussian light beam. In the paraxial approximation, the charged-particle beam can be described as a whole by a complex radius of curvature in the real space domains. Therefore, the propagation and transform of charged-particle beam passing through a first-order optical system is represented by the ABCD-like law. As an example of the application of this model, the relation between the beam waist and the minimum beam spot at a fixed target is discussed. The result, well matches that from conventional phase space model, and proves that the Gaussian wave formalism model is highly effective and reasonable.展开更多
An orthonormal beam family of super Lorentz-Gauss （SLG） beam model is proposed to describe the higher-order mode beams with high divergence, which are generated by a high power diode laser. Here we consider the simp...An orthonormal beam family of super Lorentz-Gauss （SLG） beam model is proposed to describe the higher-order mode beams with high divergence, which are generated by a high power diode laser. Here we consider the simplest case of the SLG beams, where there are four mutually orthogonal SLG beams, namely SLG00, SLG01, SLG10, and SLGll beams. The SLG00 beam is just the Lorentz-Gauss beam. Based on the Collins integral formula and the Hermite-Gaussian expansion of a Lorentz function, an analytical expression for the Wigner distribution function （WDF） of an SLG11 beam through a paraxial ABCD optical system is derived. The properties of the WDF of an SLG11 beam propagating in free space are demonstrated. The normalized WDFs of an SLG11 beam at the different spatial points are depicted in several observation planes. The influence of the beam parameter on the WDF of an SLGI 1 beam in free space is analyzed at different propagation distances. The second-order moments of the WDF of an SLG11 beam in free space are also examined. This research reveals the propagation properties of an SLGll beam from another perspective. The WDFs of SLG01 and SLG10 beams can be easily obtained by using the WDFs of Lorentz-Gauss beam and the SLG11 beam.展开更多
A general solution is obtained to a canonical problem of the reflection and refraction of an arbitrary shaped beam by using a uniaxially anisotropic chiral slab.The reflected,internal as well as refracted shaped beams...A general solution is obtained to a canonical problem of the reflection and refraction of an arbitrary shaped beam by using a uniaxially anisotropic chiral slab.The reflected,internal as well as refracted shaped beams are expanded in terms of cylindrical vector wave functions,and the expansion coefficients are determined by using the boundary conditions and method of moments procedure.As two typical examples,the normalized field intensity distributions are evaluated for a fundamental Gaussian beam and Hermite-Gaussian beam,and some propagation properties,especially the negative refraction phenomenon,are discussed briefly.展开更多
This work presents a piezoelectric vibration energy harvester(PVEH)featuring a pre-shaped curved beam with clamped boundaries to investigate its energy harvesting mechanism based on the intrinsic snap-through behavior...This work presents a piezoelectric vibration energy harvester(PVEH)featuring a pre-shaped curved beam with clamped boundaries to investigate its energy harvesting mechanism based on the intrinsic snap-through behavior.Since the ability of the beam to exhibit meta-stable and bi-stable states strongly depends on its geometric parameters,the potential energies of models with varying thicknesses and initial apex heights are analyzed,followed by the derivations of electromechanical coupled equations for both meta-stable and bi-stable systems.The effects of the geometric parameters of the curved beam on the nonlinear dynamic behaviors and energy harvesting efficiencies under different external excitations are examined.Series of experiments are tested to validate the theoretical analyses.The research findings show that the separation between the potential wells in the bi-stable beam is mainly governed by the thickness and initial apex height,while the potential barrier height is affected by both the geometric and material properties.The optimal energy harvesting efficiencies in the transition analyses of meta-stable and bi-stable states are achieved by tuning specific geometric parameters.Design guidelines are provided to maximize the bandwidth and efficiency for energy harvesting applications.展开更多
For 5G millimeter wave(mm-Wave)user equipments(UEs),all test cases must be evaluated in Over-The-Air(OTA)manner.Test time increases dramatically compared to Sub-6 GHz.Therefore,test time reduction is of great signific...For 5G millimeter wave(mm-Wave)user equipments(UEs),all test cases must be evaluated in Over-The-Air(OTA)manner.Test time increases dramatically compared to Sub-6 GHz.Therefore,test time reduction is of great significance for 5G mm-Wave OTA testing.Among all test cases,beam peak search is the most time-consuming,taking up the majority of the overall test time.Therefore,the objective of this work is to determine a suitable beam peak search grid for 5G mm-Wave UEs with satisfactory accuracy and efficiency.Through radiation property investigation of 5G mm-Wave commercial UEs,more reasonable reference array configuration(4×2)and reference deployment scenario(composite beam)are proposed for beam peak search grid analysis.The effect of different grid configurations on beam peak search precision are characterized quantitatively.The determination of associated measurement uncertainty(MU)term along with quantitative analysis approach are proposed based on statistical analysis.Finally,the recommended minimum number of beam peak search grid points is 182 based on the proposed 4×2 array under composite beam scenario.Compared with currently-required 1106 points in 3GPP/CTIA specifications,over 80%reduction can be achieved without increasing the MU limit.The feasibility of the proposed MU analysis as well as the recommended grids is demonstrated through measurements.展开更多
Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced...Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced by the injector critically influences the performance of the entire accelerator-based scientific research apparatus.The injectors of such facilities usually use photocathode and thermionic-cathode electron guns.Although the photocathode injector can produce electron beams of excellent quality,its associated laser system is massive and intricate.The thermionic-cathode electron gun,especially the gridded electron gun injector,has a simple structure capable of generating numerous electron beams.However,its emittance is typically high.In this study,methods to reduce beam emittance are explored through a comprehensive analysis of various grid structures and preliminary design results,examining the evolution of beam phase space at different grid positions.An optimization method for reducing the emittance of a gridded thermionic-cathode electron gun is proposed through theoretical derivation,electromagnetic-field simulation,and beam-dynamics simulation.A 50%reduction in emittance was achieved for a 50 keV,1.7 A electron gun,laying the foundation for the subsequent design of a high-current,low-emittance injector.展开更多
The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of...The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of the initial spin direction,the spin dynamics of the electron beam are found to depend on the self-injection mechanism.The effects of wakefields and laser fields are studied using test particle dynamics and particle-in-cell simulations based on the Thomas-Bargmann-Michel-Telegdi equation.Compared with transverse injection,longitudinal injection is found to be preferable for obtaining a highly polarized electron beam.展开更多
Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery supp...Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery support structures in electric aircraft,conventional absorbers and isolators are insufficient for effective vibration control.This study simplifies the battery support structure of electric aircraft as an integrated composite beam consisting of three interconnected beams,and investigated its structural dynamics properties and nonlinear vibration control under thermal conditions caused by battery heat.The nonlinear vibration control is performed using the Nitinol steel wire ropes(Ni Ti-ST),with nonlinear damping properties.The natural frequencies of system are determined using the Rayleigh-Ritz technique.Theoretical results are validated through both Finite Element Method(FEM)and hammer tests.Moreover,the dynamic equations are derived using the Lagrange method and discretized via the Galerkin Truncation Method(GTM).The Harmonic Balance Method(HBM)is used to evaluate the vibration responses of the integrated model,with further verification through the Runge-Kutta Method(RKM).The experiments are conducted to corroborate the theoretical analysis.The results show that the system frequency changes in stages with the increase of the stiffness of the integrated composite beam connection.Especially in the case of varying environments,as the temperature increases,the frequency of system will first increase to a certain maximum value and then gradually decrease.Furthermore,the NiTi-ST effectively reduces vibration in the integrated composite beam,particularly under varying temperatures and external excitations.展开更多
In this study,the dosimetric characteristics(thickness applicability,preheating time,temperature and humidity dependence,in-batch uniformity,readout reproducibility,dose linearity,self-decay,and electron energy respon...In this study,the dosimetric characteristics(thickness applicability,preheating time,temperature and humidity dependence,in-batch uniformity,readout reproducibility,dose linearity,self-decay,and electron energy response)of engineered polycarbonate films irradiated with an electron beam(0–600 kGy)were investigated using photoluminescence spectroscopy.The results show a linear relationship between photoluminescence intensity and radiation dose when the thickness of the polycarbonate film is 0.3 mm.A higher fluorescence intensity can be obtained by preheating at 60℃ for 180 min before photoluminescence spectrum analysis.As the temperature during spectral testing and the ambient humidity(during and after irradiation)increased,the photoluminescence intensity of the polycarbonate films decreased.The photoluminescence intensity deviation of the polycarbonate films produced within the same batch at 100 kGy is 2.73%.After ten times of repeated excitations and readouts,the coefficients of variation in photoluminescence intensity are less than 8.6%,and the linear correlation coefficient between photoluminescence intensity and irradiation dose is 0.965 in the dose capture range of 20–600 kGy.Within 60 days of irradiation,the photoluminescence intensity of the polycarbonate film decreased to 60%of the initial value.The response of the 0.3 mm polycarbonate films to electron beams with energies exceeding 3.5 MeV does not differ significantly.This comprehensive analysis indicates the potential of polycarbonate films as a high-radiation dose detection material.展开更多
Due to the intrinsic interaction between piezoelectric effects and semiconducting properties,piezoelectric semiconductors(PSs)have great promise for applications in multi-functional electronic devices,requiring a deep...Due to the intrinsic interaction between piezoelectric effects and semiconducting properties,piezoelectric semiconductors(PSs)have great promise for applications in multi-functional electronic devices,requiring a deep understanding of the multi-field coupling behavior.This work investigates the free vibration and buckling characteristics of a PS beam under different mechanical boundary conditions.The coupling fields of a PS beam are modeled by combining the Timoshenko beam theory for mechanical fields with a high-order expansion along the beam thickness for electric fields and carrier distributions.Based on the hypothesis of small perturbation of carrier density,the governing equations and boundary conditions are derived with the principle of virtual work.The differential quadrature method(DQM)is used to solve the boundary-value problem.The analytical solutions for a simply supported-simply supported(SS)PS beam are also obtained for verification.The convergence and correctness of the solutions obtained with the DQM are first evaluated.Subsequently,the effects of initial electron density,boundary conditions,and geometric parameters on the vibration and buckling characteristics are explored through numerical examples,where the finite element simulations are also included.The interaction mechanism of multi-physics fields is revealed.The scale effect on the static and dynamic responses of a PS beam is demonstrated.The derived model and findings are useful for the analysis and design of PS-based devices.展开更多
With the development of the semiconductor industry below the 7 nm scale,critical dimension small-angle X-ray scattering(CD-SAXS)has emerged as a powerful tool for quantitatively measuring nanoscale deviations.In this ...With the development of the semiconductor industry below the 7 nm scale,critical dimension small-angle X-ray scattering(CD-SAXS)has emerged as a powerful tool for quantitatively measuring nanoscale deviations.In this study,the effects of X-ray beam size and photon energy on the accuracy of critical dimension measurements were investigated.Critical dimensions measured using beams with different spot sizes showed different deviations from the expected values.Beam sizes that were either too large or too small did not improve confidence intervals.As the incident energy increased,the X-ray transmission rate increased,while the scattering cross section decreased,resulting in a gradual decrease in the signal-to-noise ratio of the diffraction peaks,which reduced the accuracy of the CD-SAXS measurements.An optimal accuracy was obtained at 12 keV with a smaller beam size.Using an effective trapezoid model,the results yielded an average pitch of 100.4±0.2 nm,width of 49.8±0.2 nm,height of 130.0±0.2 nm,and a sidewall angle below 1.1°±0.1°.These results provide crucial guidance for the future development of CD-SAXS laboratories and the construction of X-ray machines as well as robust support for research in related fields.展开更多
The microstructural evolution and mechanical properties of a vacuum electron beam welded aerospace 5B70 aluminum alloy joint were studied.Quantitative analyses of the phase composition,microstructural evolution,grain ...The microstructural evolution and mechanical properties of a vacuum electron beam welded aerospace 5B70 aluminum alloy joint were studied.Quantitative analyses of the phase composition,microstructural evolution,grain size,grain boundary density,and texture changes were performed by X-ray diffraction,scanning electron microscopy,and electron backscatter diffraction.The fusion zone(FZ)comprises equiaxed cellular crystals,and a fine~20μm-thick crystal layer forms in the transition zone(TZ)between the FZ and heat affected zone(HAZ).The HAZ closely resembles the base material(BM),retaining the original rolling microstructure.Mechanical property testing shows that the fine-grained layer in the TZ exhibits the highest nanohardness,with the FZ corresponding to the lowest microhardness.The welded-joint sample has lower yield strength,ultimate tensile strength,and elongation after fracture than the BM.These reductions of mechanical properties are primarily influenced by the grain size and distribution of the precipitated phases.展开更多
Reconfigurable intelligent surface(RIS)have been cast as a promising alternative to alleviate blockage vulnerability and enhance coverage capability for terahertz(THz)communications.Owing to large-scale array elements...Reconfigurable intelligent surface(RIS)have been cast as a promising alternative to alleviate blockage vulnerability and enhance coverage capability for terahertz(THz)communications.Owing to large-scale array elements at transceivers and RIS,the codebook based beamforming can be utilized in a computationally efficient manner.However,the codeword selection for analog beamforming is an intractable combinatorial optimization(CO)problem.To this end,by taking the CO problem as a classification problem,a multi-task learning based analog beam selection(MTL-ABS)framework is developed to implement cooperative beam selection concurrently at transceivers and RIS.In addition,residual network and self-attention mechanism are used to combat the network degradation and mine intrinsic THz channel features.Finally,the network convergence is analyzed from a blockwise perspective,and numerical results demonstrate that the MTL-ABS framework greatly decreases the beam selection overhead and achieves near optimal sum-rate compared with heuristic search based counterparts.展开更多
We develop an ultrafast Yb-fiber laser system based on eight-channel coherent beam combining utilizing commercially available rod-type Yb-fibers.To ensure good combining efficiency and long-term operation of the syste...We develop an ultrafast Yb-fiber laser system based on eight-channel coherent beam combining utilizing commercially available rod-type Yb-fibers.To ensure good combining efficiency and long-term operation of the system at the attosecond laser facility under construction,we fully stabilize the phase,group-delay,and beam-pointing of the eight fiber channels.Especially,we propose a novel multi-step hill climbing method to control both group-delay and beam-pointing.At a repetition rate of 1 MHz,this laser system delivers 270-fs pulses with 1.18-k W average power(1.18-m J pulse energy).The average-power instability of the laser system running for 12 hours is 0.32%.展开更多
Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properti...Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properties.The integration of FG materials with auxetic structures enhances their adaptability in advanced engineering applications.However,understanding their dynamic behavior under external excitations is essential for optimal design and structural reliability.Nonlinear interactions in such structures pose significant challenges in vibration analysis,necessitating robust analytical methods.This study presents a closed-form solution for the nonlinear forced vibration analysis of sandwich FG auxetic beams,offering an accurate and efficient method for predicting their dynamic response.The beam consists of two FG face sheets with material properties varying through the thickness and a re-entrant honeycomb auxetic core with an adjustable Poisson's ratio.The governing nonlinear equations of motion are derived using the first-order shear deformation theory(FSDT),the modified Gibson model,and the von Kármán relations,formulated through Hamilton's principle.A closed-form solution is obtained via the Galerkin method and multiple-scale technique.The results demonstrate that FG layers enable control of the overweight and dynamic response amplitude,with positive power law indexes reducing weight.Comparisons with finite element results confirm the accuracy of the proposed formulation.展开更多
Recently,uniform circular array(UCA)based orbital angular momentum(OAM)beam steering schemes have been proposed to overcome the limitations of coaxial transmission.Unlike the traditional multiple-input-multiple-output...Recently,uniform circular array(UCA)based orbital angular momentum(OAM)beam steering schemes have been proposed to overcome the limitations of coaxial transmission.Unlike the traditional multiple-input-multiple-output(MIMO)beam steering,OAM beam steering includes both the OAM generation and the beam steering.Generally,the true time delay(TTD)or the phase shifter(PS)are required for beam steering in the radio domain.Previous studies suggest that TTD is preferred for wideband MIMO beam steering to avoid beam squint caused by PS.However,in this paper,we theoretically prove that to generate the OAM beam ideally,PS should be used,while TTD deteriorates the mode orthogonality,which is influenced by the relative bandwidth.Once the ideal OAM beam is generated,TTD is required to prevent beam squint.Based on this analysis,we propose to use the two-stage phase-shifting(TSPS)architecture for OAM beam steering:PS for OAM generation and TTD for beam steering.Simulation results suggest that compared to the spectrum efficiency(SE)of PS based OAM communication,the SE based on the TTD significantly declines as the relative bandwidth increases.Furthermore,OAM beam steering using the TSPS architecture greatly outperforms systems that adopt a single TTD or PS network.展开更多
Based on the introductions of a type of diaphragm-through connection between concrete-filled square steel tubular columns (CFSSTCs) and H-shaped steel beams,a finite element model of the connection is developed and us...Based on the introductions of a type of diaphragm-through connection between concrete-filled square steel tubular columns (CFSSTCs) and H-shaped steel beams,a finite element model of the connection is developed and used to investigate the seismic behavior of the connection.The results of the finite element model are validated by a set of cyclic loading tests.The cyclic loading tests and the finite element analyses indicate that the failure mode of the suggested connections is plastic hinge at the beam with inelastic rotation angle exceeding 0.04 rad.The suggested connections have sufficient strength,plastic deformation and energy dissipation capacity to be used in composite moment frames as beam-to-column rigid connections.展开更多
Beam hopping technology provides a foundation for the flexible allocation and efficient utilization of satellite resources,which is considered as a key technology for the next generation of high throughput satellite s...Beam hopping technology provides a foundation for the flexible allocation and efficient utilization of satellite resources,which is considered as a key technology for the next generation of high throughput satellite systems.To alleviate the contradiction between resource utilization and co-frequency interference in beam hopping technology,this paper firstly studies dynamic clustering to balance traffic between clusters and proposes cluster hopping pool optimization method to avoid inter-cluster interference.Then based on the optimization results,a novel joint beam hopping and precoding algorithm is provided to combine resource allocation and intra-cluster interference suppression,which can make efficient utilization of system resources and achieve reliable and near-optimal transmission capacity.The simulation results show that,compared with traditional methods,the proposed algorithms can dynamically adjust to balance demand traffic between clusters and meet the service requirements of each beam,also eliminate the co-channel interference to improve the performance of satellite network.展开更多
基金Supported by the Fundamental Research Funds for the Central Universities under Grant No JUSRP51517the Graduate Student Research Innovation Project of Jiangsu-Province General University under Grant No KYLX15_1187
文摘The analytic formulae of probability distribution of spiral plane modes for the Whittaker-Gaussian （WG） beams with orbital angular momentum （OAM） in strong turbulence regime are modeled based on the modified Rytov approximation. Numerical results show that the erosstalk range of OAM modes in the vicinity of signal mode increases with the increasing refractive-index construction parameter. However, effects of change of the width of the Gaussian envelope and the parameter Wo of WG beams on normalization energy weight of signal mode can be ignored. We find theoretically that signal spiral plane mode of WG beams at each OAM level approximatively has the same normalization energy weight, implying that the channels with WG （pseudo non-diffraction） beam have higher channel capacity than the channels with the Laguerre-Gaussian beam.
基金supported by the National Key R&D Program of China(No.2018YFB1802302)the National Natural Science Foundation of China(Nos.11774181,61727815,11274182,11904180,11804250 and 1190426)+2 种基金the Natural Science Foundation of Tianjin(Nos.19JCYBJC16700 and 20JCQNJC01480)the Science and Technology Project of Tianjin(No.20YDTPJC00760)the Tianjin Development Program for Innovation and Entrepreneurship。
文摘The superposition of basic non-diffracting beams triggered new research hotspots lately,laying opportunities for long-distance wireless optical communication.The Lommel-Gaussian(LMG)beam formed by the superposition of Bessel-Gaussian light not only possesses non-diffraction feature,but also has tunable symmetry.With the help of Poynting vector analysis,we observed a smaller radial energy flow component during the propagation of the high order symmetrical LMG beam,which allows it to maintain the original beam profile over long distance.Thanks to the energy oscillation of the mainlobe and sidelobes,the mainlobe blocked by the symmetrical LMG beam can be restored.Also,the random phase screen with angular spectrum method is used to describe the beam behaviors in turbulence.The results show that the symmetry LMG is preferred in free space optical communication,and the asymmetric LMG performs poorly due to asymmetric energy transfer.
文摘An elliptical Gaussian wave formalism model of a charged-particle beam is proposed by analogy with an elliptical Gaussian light beam. In the paraxial approximation, the charged-particle beam can be described as a whole by a complex radius of curvature in the real space domains. Therefore, the propagation and transform of charged-particle beam passing through a first-order optical system is represented by the ABCD-like law. As an example of the application of this model, the relation between the beam waist and the minimum beam spot at a fixed target is discussed. The result, well matches that from conventional phase space model, and proves that the Gaussian wave formalism model is highly effective and reasonable.
基金Project supported by the National Natural Science Foundation of China (Grant No.10974179)the Natural Science Foundation of Zhejiang Province,China(Grant No.Y1090073)
文摘An orthonormal beam family of super Lorentz-Gauss （SLG） beam model is proposed to describe the higher-order mode beams with high divergence, which are generated by a high power diode laser. Here we consider the simplest case of the SLG beams, where there are four mutually orthogonal SLG beams, namely SLG00, SLG01, SLG10, and SLGll beams. The SLG00 beam is just the Lorentz-Gauss beam. Based on the Collins integral formula and the Hermite-Gaussian expansion of a Lorentz function, an analytical expression for the Wigner distribution function （WDF） of an SLG11 beam through a paraxial ABCD optical system is derived. The properties of the WDF of an SLG11 beam propagating in free space are demonstrated. The normalized WDFs of an SLG11 beam at the different spatial points are depicted in several observation planes. The influence of the beam parameter on the WDF of an SLGI 1 beam in free space is analyzed at different propagation distances. The second-order moments of the WDF of an SLG11 beam in free space are also examined. This research reveals the propagation properties of an SLGll beam from another perspective. The WDFs of SLG01 and SLG10 beams can be easily obtained by using the WDFs of Lorentz-Gauss beam and the SLG11 beam.
基金Project supported by the National Natural Science Foundation of China(Grant No.61771385)the Science Foundation for Distinguished Young Scholars of Shaanxi Province,China(Grant No.2020JC-42)+1 种基金the Fund from the Science and Technology on Solid-State Laser Laboratory,China(Grant No.6142404180301)the Science and Technology Research Plan of Xi’an City,China(Grant No.GXYD14.26).
文摘A general solution is obtained to a canonical problem of the reflection and refraction of an arbitrary shaped beam by using a uniaxially anisotropic chiral slab.The reflected,internal as well as refracted shaped beams are expanded in terms of cylindrical vector wave functions,and the expansion coefficients are determined by using the boundary conditions and method of moments procedure.As two typical examples,the normalized field intensity distributions are evaluated for a fundamental Gaussian beam and Hermite-Gaussian beam,and some propagation properties,especially the negative refraction phenomenon,are discussed briefly.
基金supported by the National Natural Science Foundation of China(Nos.12172012,12372024,and 11802005)。
文摘This work presents a piezoelectric vibration energy harvester(PVEH)featuring a pre-shaped curved beam with clamped boundaries to investigate its energy harvesting mechanism based on the intrinsic snap-through behavior.Since the ability of the beam to exhibit meta-stable and bi-stable states strongly depends on its geometric parameters,the potential energies of models with varying thicknesses and initial apex heights are analyzed,followed by the derivations of electromechanical coupled equations for both meta-stable and bi-stable systems.The effects of the geometric parameters of the curved beam on the nonlinear dynamic behaviors and energy harvesting efficiencies under different external excitations are examined.Series of experiments are tested to validate the theoretical analyses.The research findings show that the separation between the potential wells in the bi-stable beam is mainly governed by the thickness and initial apex height,while the potential barrier height is affected by both the geometric and material properties.The optimal energy harvesting efficiencies in the transition analyses of meta-stable and bi-stable states are achieved by tuning specific geometric parameters.Design guidelines are provided to maximize the bandwidth and efficiency for energy harvesting applications.
基金supported by the Beijing Natural Science Foundation under Grant L253002.
文摘For 5G millimeter wave(mm-Wave)user equipments(UEs),all test cases must be evaluated in Over-The-Air(OTA)manner.Test time increases dramatically compared to Sub-6 GHz.Therefore,test time reduction is of great significance for 5G mm-Wave OTA testing.Among all test cases,beam peak search is the most time-consuming,taking up the majority of the overall test time.Therefore,the objective of this work is to determine a suitable beam peak search grid for 5G mm-Wave UEs with satisfactory accuracy and efficiency.Through radiation property investigation of 5G mm-Wave commercial UEs,more reasonable reference array configuration(4×2)and reference deployment scenario(composite beam)are proposed for beam peak search grid analysis.The effect of different grid configurations on beam peak search precision are characterized quantitatively.The determination of associated measurement uncertainty(MU)term along with quantitative analysis approach are proposed based on statistical analysis.Finally,the recommended minimum number of beam peak search grid points is 182 based on the proposed 4×2 array under composite beam scenario.Compared with currently-required 1106 points in 3GPP/CTIA specifications,over 80%reduction can be achieved without increasing the MU limit.The feasibility of the proposed MU analysis as well as the recommended grids is demonstrated through measurements.
基金supported by the Hundred-person Program of Chinese Academy of Sciences and the National Natural Science Foundation of China(No.11905074).
文摘Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced by the injector critically influences the performance of the entire accelerator-based scientific research apparatus.The injectors of such facilities usually use photocathode and thermionic-cathode electron guns.Although the photocathode injector can produce electron beams of excellent quality,its associated laser system is massive and intricate.The thermionic-cathode electron gun,especially the gridded electron gun injector,has a simple structure capable of generating numerous electron beams.However,its emittance is typically high.In this study,methods to reduce beam emittance are explored through a comprehensive analysis of various grid structures and preliminary design results,examining the evolution of beam phase space at different grid positions.An optimization method for reducing the emittance of a gridded thermionic-cathode electron gun is proposed through theoretical derivation,electromagnetic-field simulation,and beam-dynamics simulation.A 50%reduction in emittance was achieved for a 50 keV,1.7 A electron gun,laying the foundation for the subsequent design of a high-current,low-emittance injector.
基金supported by the National Natural Science Foundation of China(Grant Nos.11804348,11775056,11975154,12225505,and 12405281)the Science Challenge(Project No.TZ2018005)+2 种基金supported by the Shanghai Pujiang Program(Grant No.23PJ1414600)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0890203)supported by the Accelerator Technology Helmholtz Infrastructure consortium ATHENA.
文摘The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of the initial spin direction,the spin dynamics of the electron beam are found to depend on the self-injection mechanism.The effects of wakefields and laser fields are studied using test particle dynamics and particle-in-cell simulations based on the Thomas-Bargmann-Michel-Telegdi equation.Compared with transverse injection,longitudinal injection is found to be preferable for obtaining a highly polarized electron beam.
基金supported by the National Natural Science Foundation of China(No.12272240)the Liaoning Revitalization Talents Program,China(No.XLYC2203197)。
文摘Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery support structures in electric aircraft,conventional absorbers and isolators are insufficient for effective vibration control.This study simplifies the battery support structure of electric aircraft as an integrated composite beam consisting of three interconnected beams,and investigated its structural dynamics properties and nonlinear vibration control under thermal conditions caused by battery heat.The nonlinear vibration control is performed using the Nitinol steel wire ropes(Ni Ti-ST),with nonlinear damping properties.The natural frequencies of system are determined using the Rayleigh-Ritz technique.Theoretical results are validated through both Finite Element Method(FEM)and hammer tests.Moreover,the dynamic equations are derived using the Lagrange method and discretized via the Galerkin Truncation Method(GTM).The Harmonic Balance Method(HBM)is used to evaluate the vibration responses of the integrated model,with further verification through the Runge-Kutta Method(RKM).The experiments are conducted to corroborate the theoretical analysis.The results show that the system frequency changes in stages with the increase of the stiffness of the integrated composite beam connection.Especially in the case of varying environments,as the temperature increases,the frequency of system will first increase to a certain maximum value and then gradually decrease.Furthermore,the NiTi-ST effectively reduces vibration in the integrated composite beam,particularly under varying temperatures and external excitations.
基金supported by the National Natural Science Foundation of China(No.12305385)Key Projects of Scientific Research of the Hunan Provincial Department of Education(22A0310)the Research Startup Project of University of South China(220XQD025).
文摘In this study,the dosimetric characteristics(thickness applicability,preheating time,temperature and humidity dependence,in-batch uniformity,readout reproducibility,dose linearity,self-decay,and electron energy response)of engineered polycarbonate films irradiated with an electron beam(0–600 kGy)were investigated using photoluminescence spectroscopy.The results show a linear relationship between photoluminescence intensity and radiation dose when the thickness of the polycarbonate film is 0.3 mm.A higher fluorescence intensity can be obtained by preheating at 60℃ for 180 min before photoluminescence spectrum analysis.As the temperature during spectral testing and the ambient humidity(during and after irradiation)increased,the photoluminescence intensity of the polycarbonate films decreased.The photoluminescence intensity deviation of the polycarbonate films produced within the same batch at 100 kGy is 2.73%.After ten times of repeated excitations and readouts,the coefficients of variation in photoluminescence intensity are less than 8.6%,and the linear correlation coefficient between photoluminescence intensity and irradiation dose is 0.965 in the dose capture range of 20–600 kGy.Within 60 days of irradiation,the photoluminescence intensity of the polycarbonate film decreased to 60%of the initial value.The response of the 0.3 mm polycarbonate films to electron beams with energies exceeding 3.5 MeV does not differ significantly.This comprehensive analysis indicates the potential of polycarbonate films as a high-radiation dose detection material.
基金Project supported by the National Natural Science Foundation of China(Nos.U21A20430 and 12472155)the Natural Science Foundation of Hebei Province of China(No.A2024210002)。
文摘Due to the intrinsic interaction between piezoelectric effects and semiconducting properties,piezoelectric semiconductors(PSs)have great promise for applications in multi-functional electronic devices,requiring a deep understanding of the multi-field coupling behavior.This work investigates the free vibration and buckling characteristics of a PS beam under different mechanical boundary conditions.The coupling fields of a PS beam are modeled by combining the Timoshenko beam theory for mechanical fields with a high-order expansion along the beam thickness for electric fields and carrier distributions.Based on the hypothesis of small perturbation of carrier density,the governing equations and boundary conditions are derived with the principle of virtual work.The differential quadrature method(DQM)is used to solve the boundary-value problem.The analytical solutions for a simply supported-simply supported(SS)PS beam are also obtained for verification.The convergence and correctness of the solutions obtained with the DQM are first evaluated.Subsequently,the effects of initial electron density,boundary conditions,and geometric parameters on the vibration and buckling characteristics are explored through numerical examples,where the finite element simulations are also included.The interaction mechanism of multi-physics fields is revealed.The scale effect on the static and dynamic responses of a PS beam is demonstrated.The derived model and findings are useful for the analysis and design of PS-based devices.
基金supported by the National Natural Science Foundation of China(No.12175295)the National Key R&D Program of China(2021YFA1601000)the Shanghai Municipal Science and Technology Major Project。
文摘With the development of the semiconductor industry below the 7 nm scale,critical dimension small-angle X-ray scattering(CD-SAXS)has emerged as a powerful tool for quantitatively measuring nanoscale deviations.In this study,the effects of X-ray beam size and photon energy on the accuracy of critical dimension measurements were investigated.Critical dimensions measured using beams with different spot sizes showed different deviations from the expected values.Beam sizes that were either too large or too small did not improve confidence intervals.As the incident energy increased,the X-ray transmission rate increased,while the scattering cross section decreased,resulting in a gradual decrease in the signal-to-noise ratio of the diffraction peaks,which reduced the accuracy of the CD-SAXS measurements.An optimal accuracy was obtained at 12 keV with a smaller beam size.Using an effective trapezoid model,the results yielded an average pitch of 100.4±0.2 nm,width of 49.8±0.2 nm,height of 130.0±0.2 nm,and a sidewall angle below 1.1°±0.1°.These results provide crucial guidance for the future development of CD-SAXS laboratories and the construction of X-ray machines as well as robust support for research in related fields.
基金supported by the National Natural Science Foundation of China(Nos.52175206,52205187,52130509)the Science and Technology Planning Project of Guizhou Province,China(No.ZK[2022]013)。
文摘The microstructural evolution and mechanical properties of a vacuum electron beam welded aerospace 5B70 aluminum alloy joint were studied.Quantitative analyses of the phase composition,microstructural evolution,grain size,grain boundary density,and texture changes were performed by X-ray diffraction,scanning electron microscopy,and electron backscatter diffraction.The fusion zone(FZ)comprises equiaxed cellular crystals,and a fine~20μm-thick crystal layer forms in the transition zone(TZ)between the FZ and heat affected zone(HAZ).The HAZ closely resembles the base material(BM),retaining the original rolling microstructure.Mechanical property testing shows that the fine-grained layer in the TZ exhibits the highest nanohardness,with the FZ corresponding to the lowest microhardness.The welded-joint sample has lower yield strength,ultimate tensile strength,and elongation after fracture than the BM.These reductions of mechanical properties are primarily influenced by the grain size and distribution of the precipitated phases.
文摘Reconfigurable intelligent surface(RIS)have been cast as a promising alternative to alleviate blockage vulnerability and enhance coverage capability for terahertz(THz)communications.Owing to large-scale array elements at transceivers and RIS,the codebook based beamforming can be utilized in a computationally efficient manner.However,the codeword selection for analog beamforming is an intractable combinatorial optimization(CO)problem.To this end,by taking the CO problem as a classification problem,a multi-task learning based analog beam selection(MTL-ABS)framework is developed to implement cooperative beam selection concurrently at transceivers and RIS.In addition,residual network and self-attention mechanism are used to combat the network degradation and mine intrinsic THz channel features.Finally,the network convergence is analyzed from a blockwise perspective,and numerical results demonstrate that the MTL-ABS framework greatly decreases the beam selection overhead and achieves near optimal sum-rate compared with heuristic search based counterparts.
基金Project supported by the Key Deployment Special Research Project of the Chinese Academy of Sciences(Grant No.PTYQ2022YZ0001)the National Natural Science Foundation of China(Grant Nos.62175255 and 62227822)the National Key Research and Development Program of China(Grant No.2021YFB3602602)。
文摘We develop an ultrafast Yb-fiber laser system based on eight-channel coherent beam combining utilizing commercially available rod-type Yb-fibers.To ensure good combining efficiency and long-term operation of the system at the attosecond laser facility under construction,we fully stabilize the phase,group-delay,and beam-pointing of the eight fiber channels.Especially,we propose a novel multi-step hill climbing method to control both group-delay and beam-pointing.At a repetition rate of 1 MHz,this laser system delivers 270-fs pulses with 1.18-k W average power(1.18-m J pulse energy).The average-power instability of the laser system running for 12 hours is 0.32%.
文摘Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properties.The integration of FG materials with auxetic structures enhances their adaptability in advanced engineering applications.However,understanding their dynamic behavior under external excitations is essential for optimal design and structural reliability.Nonlinear interactions in such structures pose significant challenges in vibration analysis,necessitating robust analytical methods.This study presents a closed-form solution for the nonlinear forced vibration analysis of sandwich FG auxetic beams,offering an accurate and efficient method for predicting their dynamic response.The beam consists of two FG face sheets with material properties varying through the thickness and a re-entrant honeycomb auxetic core with an adjustable Poisson's ratio.The governing nonlinear equations of motion are derived using the first-order shear deformation theory(FSDT),the modified Gibson model,and the von Kármán relations,formulated through Hamilton's principle.A closed-form solution is obtained via the Galerkin method and multiple-scale technique.The results demonstrate that FG layers enable control of the overweight and dynamic response amplitude,with positive power law indexes reducing weight.Comparisons with finite element results confirm the accuracy of the proposed formulation.
基金Shanghai 20246G Technology Innovation and Future Industry Development Project under grant 24DP1501204。
文摘Recently,uniform circular array(UCA)based orbital angular momentum(OAM)beam steering schemes have been proposed to overcome the limitations of coaxial transmission.Unlike the traditional multiple-input-multiple-output(MIMO)beam steering,OAM beam steering includes both the OAM generation and the beam steering.Generally,the true time delay(TTD)or the phase shifter(PS)are required for beam steering in the radio domain.Previous studies suggest that TTD is preferred for wideband MIMO beam steering to avoid beam squint caused by PS.However,in this paper,we theoretically prove that to generate the OAM beam ideally,PS should be used,while TTD deteriorates the mode orthogonality,which is influenced by the relative bandwidth.Once the ideal OAM beam is generated,TTD is required to prevent beam squint.Based on this analysis,we propose to use the two-stage phase-shifting(TSPS)architecture for OAM beam steering:PS for OAM generation and TTD for beam steering.Simulation results suggest that compared to the spectrum efficiency(SE)of PS based OAM communication,the SE based on the TTD significantly declines as the relative bandwidth increases.Furthermore,OAM beam steering using the TSPS architecture greatly outperforms systems that adopt a single TTD or PS network.
基金Supported by National Natural Science Foundation of China(No.51268054)Natural Science Foundation of Tianjin(No.13JCQNJC07300)the foundation of Key Laboratory of Coast Civil Structure Safety(Tianjin University),Ministry of Education of China(No.2011-1)
文摘Based on the introductions of a type of diaphragm-through connection between concrete-filled square steel tubular columns (CFSSTCs) and H-shaped steel beams,a finite element model of the connection is developed and used to investigate the seismic behavior of the connection.The results of the finite element model are validated by a set of cyclic loading tests.The cyclic loading tests and the finite element analyses indicate that the failure mode of the suggested connections is plastic hinge at the beam with inelastic rotation angle exceeding 0.04 rad.The suggested connections have sufficient strength,plastic deformation and energy dissipation capacity to be used in composite moment frames as beam-to-column rigid connections.
基金National Natural Science Foundation of China (No. 61901230, 61801445 and 91738201)Key pre-research project for civil space technology: Research project on VHTS communication technology (No. B0106)。
文摘Beam hopping technology provides a foundation for the flexible allocation and efficient utilization of satellite resources,which is considered as a key technology for the next generation of high throughput satellite systems.To alleviate the contradiction between resource utilization and co-frequency interference in beam hopping technology,this paper firstly studies dynamic clustering to balance traffic between clusters and proposes cluster hopping pool optimization method to avoid inter-cluster interference.Then based on the optimization results,a novel joint beam hopping and precoding algorithm is provided to combine resource allocation and intra-cluster interference suppression,which can make efficient utilization of system resources and achieve reliable and near-optimal transmission capacity.The simulation results show that,compared with traditional methods,the proposed algorithms can dynamically adjust to balance demand traffic between clusters and meet the service requirements of each beam,also eliminate the co-channel interference to improve the performance of satellite network.
