This paper aims to fuse two well-established and,at the same time,opposed control techniques,namely,model predictive control(MPC)and active disturbance rejection control(ADRC),to develop a dynamic motion controller fo...This paper aims to fuse two well-established and,at the same time,opposed control techniques,namely,model predictive control(MPC)and active disturbance rejection control(ADRC),to develop a dynamic motion controller for a laser beam steering system.The proposed technique uses the ADRC philosophy to lump disturbances and model uncertainties into a total disturbance.Then,the total disturbance is estimated via a discrete extended state disturbance observer(ESO),and it is used to(1)handle the system constraints in a quadratic optimization problem and(2)injected as a feedforward term to the plant to reject the total disturbance,together with the feedback term obtained by the MPC.The main advantage of the proposed approach is that the MPC is designed based on a straightforward integrator-chain model such that a simple convex optimization problem is performed.Several experiments show the real-time closed-loop performance regarding trajectory tracking and disturbance rejection.Owing to simplicity,the self-contained approach MPC+ESO becomes a Frugal MPC,which is computationally economical,adaptable,efficient,resilient,and suitable for applications where on-board computational resources are limited.展开更多
We develope a simple method to stabilize the beam during propagation. Combination of the self-developed control module and the large diameter mirrors reconstruct the beam stabilization system, and some important proce...We develope a simple method to stabilize the beam during propagation. Combination of the self-developed control module and the large diameter mirrors reconstruct the beam stabilization system, and some important procedures are presented, such as calibration arid average filter. The results show that the horizontal pointing and vertical pointing are stabilized to within 8.43 and 7.59 μrad, and the beam horizontal position and vertical position are stabilized to within 2.16 and 2.11 μm respectively. The regulating time is within 84 ms. Thus the method presented is effective for the current stabilization system applied in lithography tools.展开更多
Orbital angular momentum(OAM)at radio frequency(RF)has attracted more and more attention as a novel approach of multiplexing a set of orthogonal OAM modes on the same frequency channel to achieve high spectral efficie...Orbital angular momentum(OAM)at radio frequency(RF)has attracted more and more attention as a novel approach of multiplexing a set of orthogonal OAM modes on the same frequency channel to achieve high spectral efficiency(SE).However,the precondition for maintaining the orthogonality among different OAM modes is perfect alignment of the transmit and receive uniform circular arrays(UCAs),which is difficult to be satisfied in practical wireless communication scenarios.Therefore,to achieve available multi-mode OAM broadband wireless communication,we first investigate the effect of oblique angles on the transmission performance of the multi-mode OAM broadband system in the non-parallel misalignment case.Then,we compare the UCA-based RF analog and baseband digital transceiver structures and corresponding beam steering schemes.Mathematical analysis and numerical simulations validate that the SE of the misaligned multi-mode OAM broadband system is quite low,while analog and digital beam steering(DBS)both can significantly improve the SE of the system.However,DBS can obtain higher SE than analog beam steering especially when the bandwidth and the number of array elements are large,which validates that the baseband digital transceiver with DBS is more suitable for multi-mode OAM broadband wireless communication systems in practice.展开更多
With the urgently increasing demand for high-speed and large-capacity communication trans-mission,there remains a critical need for tunable terahertz(THz)devices with multi-channel in 5G/6G communication systems.A mag...With the urgently increasing demand for high-speed and large-capacity communication trans-mission,there remains a critical need for tunable terahertz(THz)devices with multi-channel in 5G/6G communication systems.A magnetic phase-coding meta-atom(MPM)is formed by the heterogeneous integration of La:YIG magneto-optical(MO)materials and Si microstructures.The MPM couples the magnetic induction phase of spin states with the propagation phase and can simultaneously satisfy the required output phase for dual frequencies under various external magnetic fields to realize the dynamic beam steering among multiple channels at 0.25 and 0.5 THz.The energy ratio of the target direction can reach 96.5%,and the nonreciprocal one-way transmission with a max isolation of 29.8 dB is realized due to the nonreciprocal phase shift of the MO layer.This nonreciprocal mechanism of magnetic induction reshaping of wavefront significantly holds promise for advancing integrated multi-functional THz devices with the characteristics of low-crosstalk,multi-channel,and multi-frequency,and has great potential to promote the development of THz large-capacity and high-speed communication.展开更多
The traditional one-dimensional ultrasonic beam steering has time delay and is thus a complicated problem. A numerical model of ultrasonic beam steering using Neumann boundary condition in multiplysics is presented in...The traditional one-dimensional ultrasonic beam steering has time delay and is thus a complicated problem. A numerical model of ultrasonic beam steering using Neumann boundary condition in multiplysics is presented in the present paper. This model is based on the discrete wave number method that has been proved theoretically to satisfy the continuous conditions. The propagating angle of novel model is a function of the distance instead of the time domain. The propagating wave fronts at desired angles are simulated with the single line sources for plane wave. The result indicates that any beam angle can be steered by discrete line elements resources without any time delay.展开更多
To meet the application need for agile precision beam steering, a novel liquid crystal prism device with a simple structure, convenient control, low cost and applicable performance is presented, and analysed theoretic...To meet the application need for agile precision beam steering, a novel liquid crystal prism device with a simple structure, convenient control, low cost and applicable performance is presented, and analysed theoretically and experimentally. The relationships between the optical path and the thickness of the liquid crystal cell under different voltages are investigated quantitatively by using a theoretical model. Analysis results show that the optical path profile of the liquid crystal prism has a quasi-linear slope and the standard deviation of the linear slope is less than 16 nm. The slope ratio can be changed by a voltage, which achieves the programmable beam steering and control. Practical liquid crystal prism devices are fabricated. Their deflection angles and wavefront profiles with different voltages are experimentally tested. The results are in good agreement with the simulated results. The results imply that the agile beam steering in a scope of 100μrad with a micro-rad resolution is substantiated in the device. The two-dimensional beam steering is also achieved by cascading two liquid crystal prism devices.展开更多
A beam steering effect of high-power quantum cascade(QC) lasers emitting at 4.6 μm was investigated. The continuous wave(CW) output power of an uncoated, 6-mm-long, 7.5-μm-wide buried-heterostructure QC laser at 25...A beam steering effect of high-power quantum cascade(QC) lasers emitting at 4.6 μm was investigated. The continuous wave(CW) output power of an uncoated, 6-mm-long, 7.5-μm-wide buried-heterostructure QC laser at 25℃ was as high as 854.2 m W. The maximum beam steering angle was offset by ±14.2° from the facet normal(0°) in pulsed mode. The phenomenon was judged explicitly by combining the diffraction limit theory and Fourier transform of the spectra. It was also verified by finite element method software simulation and the calculation of two-dimensional(2 D)effective-index model. The observed steering is consistent with a theory for coherence between the two lowest order lateral modes. Therefore, we have established an intrinsic linkage between the spectral instabilities and the beam steering by using the Fourier transform of the spectra, and further presented an extremely valid method to judge the beam steering. The content of this method includes both three equidistant peak positions in the Fourier transform of the spectra and the beam quality located between once the diffraction limit(DL) and twice the DL.展开更多
We propose an anisotropic planar transmitting metasurface, which has the ability to manipulate orthogonally-polarized electromagnetic waves in the reflection and refraction modes respectively. The metasurface is compo...We propose an anisotropic planar transmitting metasurface, which has the ability to manipulate orthogonally-polarized electromagnetic waves in the reflection and refraction modes respectively. The metasurface is composed of four layered rectangular patches spaced by three layered dielectric isolators each with a thickness of 0.15λ0 at 15 GHz. By tailoring the sizes of the patches, the metasurface functions as a band-stop filter for the y-polarzied wave and a band-pass filter for the x-polarized wave operating from 14 GHz to 16 GHz. Moreover the phases of the transmitting x-polarized wave can be modulated at about 15 GHz, which contributes to beam steering according to the general refraction law. Experimental results are in good accordance with the simulated ones, in which the reflection efficiency is almost 100% while the transmission efficiency of the x-polarized wave reaches 80% at 15 GHz. Besides, the transmitted x-polarized wave is effectively manipulated from 14 GHz to 16 GHz.展开更多
Orbital Angular Momentum(OAM)is an intrinsic feature of electromagnetic waves which has recently found many applications in several areas in radio and optics.In this paper,we use OAM wave characteristics to present a ...Orbital Angular Momentum(OAM)is an intrinsic feature of electromagnetic waves which has recently found many applications in several areas in radio and optics.In this paper,we use OAM wave characteristics to present a simple method for beam steering over both elevation and azimuth planes.The design overcomes some limitations of traditional steering methods,such as limited dynamic range of steering,the design complexity,bulky size of the steering structure,the limited bandwidth of operation,and low gain.Based on OAM wave characteristics,the proposed steering method avoids design complexities by adopting a simple method for generating the OAM-carrying waves.The waves are generated by an array of Planar Circular Dipole(PCD)elements.These elements are designed to cover a wide bandwidth range between 3 and 30 GHz.The transmitting array shows an enhanced gain value from 8.5 dBi to almost 11.5 dBi at the broadside angle.Besides the enhanced PCD-based OAM generation,the novelty of the design lies in a new method of beam steering.Beam steering is then performed by controlling the electrical feeding of the PCD elements;the beam azimuthal location is managed by turning off some of the PCD elements,while the elevation is determined by changing the gradient phase of excitation for the turned-on PCD elements.Detailed analysis of the steering method is carried out by finding the mathematical model of the system and the generated waves.The performance has been verified through numerical simulators.展开更多
Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences amo...Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences among elements, inter-element spacing, element size and emitted wavelength is analyzed detailedly and systematically. We design and fabricate 1×2 implant defined VCSEL arrays for optimum beam steering performance. Electroni- cally controlled beam steering with a maximum deflection angle of 1.6° is successfully achieved in the 1 × 2 VCSEL arrays. The percentage of the power in the central lobe is above 39% when steering. The results show that the steering is controllable. Compared with other beam steering methods, the fabrication process is simple and of low cost.展开更多
A 1-bit electronically controlled metasurface reflectarray is presented to achieve beam steering with multiple polarization manipulations. A metsurface unit cell loaded by two PIN diodes is designed. By switching the ...A 1-bit electronically controlled metasurface reflectarray is presented to achieve beam steering with multiple polarization manipulations. A metsurface unit cell loaded by two PIN diodes is designed. By switching the two PIN diodes between ON and OFF states, the isotropic and anisotropic reflections can be flexibly achieved. For either the isotropic reflection or the anisotropic reflection, the two operation states achieve the reflection coefficients with approximately equal magnitude and 180°out of phase, thus giving rise to the isotropic/anisotropic 1-bit metasurface unit cells. With the 1-bit unit cells, a 12-by-12 metasurface reflectarray is optimally designed and fabricated. Under either y-or x-polarized incident wave illumination, the reflectarray can achieve the co-polarized and cross-polarized beam scanning, respectively, with the peak gains of 20.08 d Bi and 17.26 d Bi within the scan range of about ±50°. With the right-handed circular polarization(RHCP) excitation, the left-handed circular polarization(LHCP) radiation with the peak gain of 16.98 d Bic can be achieved within the scan range of ±50°. Good agreement between the experimental results and the simulation results are observed for 2D beam steering and polarization manipulation capabilities.展开更多
This paper presents the design and implementation of a miniaturized beam steering network that produces broadside beams when it is fed with a compact antenna array.Butler Matrix(BM)was used as the beam steering networ...This paper presents the design and implementation of a miniaturized beam steering network that produces broadside beams when it is fed with a compact antenna array.Butler Matrix(BM)was used as the beam steering network.It was completely built from a miniaturized 3 dB hybrid-couplers in planar microstrip technology.It was configured by feeding the BM with a Planar Inverted-E Antenna(PIEA)array separated at 0.3λas against the 0.5λseparation.This makes the BM produce a major radiation pattern at the broadside.Apart from the miniaturization,no modification was made from the BM side.However,employing effective mutual coupling reduction techniques helped to design the compact PIEA array.The validity of this BM based multibeam PIEA array was demonstrated by comparing the simulation results of the reflection coefficients,transmissions coefficients and the radiation pattern with measurements.The measurement results showed good agreement with simulations.展开更多
This paper provides a modified fast adaptive algorithm for digital beamforming. It is analgorithm with strict constraint minimum power sampling matrix gradient (CSMG). It has merits ofboth traditional sampling mains g...This paper provides a modified fast adaptive algorithm for digital beamforming. It is analgorithm with strict constraint minimum power sampling matrix gradient (CSMG). It has merits ofboth traditional sampling mains gradient (SMG) and strictly constrained minimum power adaptivealgorithm. 16-element uniform circular array is selected. Some results of computer simulation aregiven. The results indicate that the beam direction will change with constraint angle and can beadaptable to adjust zero very well. The algorithm is fast convergent.展开更多
<div style="text-align:justify;"> In this work, a design of a compact optical MEMS-based lidar scanning system with a large field of view (FOV) and small distortion is presented. The scanning system ap...<div style="text-align:justify;"> In this work, a design of a compact optical MEMS-based lidar scanning system with a large field of view (FOV) and small distortion is presented. The scanning system applies an off-axis structure and the length of the system can be reduced to about 10 cm in an optimized way. Simulation results show that a large FOV is achieved under a uniform scanning scheme. In addition, the spot size less than 20 cm at distance of 100 m is also realized. The optical scanning system can be used for the vehicle-mounted Lidar. </div>展开更多
Dispersive optical phased arrays(DOPAs)offer a method for fast 2D beam scanning for solid-state LiDAR with a pure passive operation,and therefore low control complexity and low power consumption.However,in terms of sc...Dispersive optical phased arrays(DOPAs)offer a method for fast 2D beam scanning for solid-state LiDAR with a pure passive operation,and therefore low control complexity and low power consumption.However,in terms of scalability,state-of-the-art DOPAs do not easily achieve a balanced performance over the specifications of longrange LiDAR,including the number of pixels(resolvable points)and beam quality.Here,we experimentally demonstrate the pixelated DOPA concept,which overcomes the scaling challenges of classical(continuous)DOPAs by introducing a new design degree of freedom:the discretization of the optical delay lines distribution network into blocks.We also present the first demonstration of the unbalanced splitter tree architecture for the DOPA distribution network,incorporated in both the continuous DOPA and the pixelated DOPA variations.The small-scale demonstration circuits can scan over a field of view of 15°×7.2°,where the continuous DOPA provides 16×25 pixels,while the pixelated DOPA provides 4×25 pixels,for a 1500 to 1600 nm wavelength sweep.The pixelated DOPA exhibits a side lobe suppression ratio with a median of 7.6 dB,which is higher than that of the continuous version,with a median of 3.6 dB.In addition,the ratio of the main beam to the background radiation pattern is 11 dB(median value)for the pixelated DOPA,while for the continuous DOPA,it is 9.5 dB.This is an indication of a higher beam quality and lower phase errors in the pixelated DOPA.The degree of discretization,combined with other design parameters,will potentially enable better control over the beam quality,while setting practical values for the number of pixels for large-scale DOPAs.展开更多
This study examines paramagnetic liquids for optical beam steering in optical wireless communication(OWC)systems.By employing magnetic actuation,effective optical beam control was achieved for both free-space optics(F...This study examines paramagnetic liquids for optical beam steering in optical wireless communication(OWC)systems.By employing magnetic actuation,effective optical beam control was achieved for both free-space optics(FSO)and underwater wireless optical communication(UWOC).Experimental findings revealed that dysprosium nitrate provided the highest beam steering angles of 5.99°in the±X direction and 5.73°in the±Y direction.Additionally,power loss analysis indicated minimal absorption and scattering for dysprosium nitrate and gadolinium nitrate.The system achieved high-speed data rates of 2.1 Gbps for FSO and 1.9 Gbps for UWOC systems,showcasing the promise of this technology.展开更多
The emergent metagrating,with its unique and flexible beam shaping capabilities,offers new paths to efficient modulation of acoustic waves.In this work,an acoustic metagrating is demonstrated for high-efficiency and w...The emergent metagrating,with its unique and flexible beam shaping capabilities,offers new paths to efficient modulation of acoustic waves.In this work,an acoustic metagrating is demonstrated for high-efficiency and wide-angle anomalous refraction.It is shown that the normal reflection and transmission can be totally suppressed by properly modulating the amplitude and phase characteristics of the metagrating supercells for high-efficiency anomalous refraction.The anomalous refraction behavior is achieved in the wide range of incident angles from 28°to 78°,and the efficiency of-1st order diffraction is higher than 90%by finely designing the metagrating structure.The anomalous refraction behaviors are verified experimentally at incidence angle of 28°,45°,and 78°,respectively.The demonstrated metagrating is anticipated to possess efficient wide-angle composite wavefront engineering applications in such fields as communications.展开更多
Since flat optics has the feature to implement a compact system,they are widely used in various applications to replace bulky refractive optics.However,they suffer from chromatic aberrations due to dispersion,limiting...Since flat optics has the feature to implement a compact system,they are widely used in various applications to replace bulky refractive optics.However,they suffer from chromatic aberrations due to dispersion,limiting their effectiveness to a narrow wavelength range.Consequently,diffractive optics has been applied for dynamic beam steering within a specific wavelength region or for static steering across multiple wavelengths.This limitation has made it challenging to implement dynamic beam steering in full-color display applications.To address this issue,we developed a multi-wavelength-based optical architecture that mitigates chromatic aberrations.This system incorporates color-selective retarders,half-wave plates,polarization plates,and beam deflectors.We experimentally demonstrated an achromatic beam deflector using a dynamic phase array in transmission mode,achieving continuous tunable beam steering over multiple wavelengths at 460,520,and 638 nm.展开更多
A polarization-independent nonmechanical laser beam steering scheme is proposed to realize continuous two-dimensional（2 D） scanning with high efficiency, where the core components are two polarization-dependent devi...A polarization-independent nonmechanical laser beam steering scheme is proposed to realize continuous two-dimensional（2 D） scanning with high efficiency, where the core components are two polarization-dependent devices, which are called liquid crystal optical phased arrays（LC-OPAs）. These two one-dimensional（1D） devices are orthogonally cascaded to work on the state of azimuthal and elevation steering, respectively. Properties of polarization independence as well as 2D beam steering are mathematically and experimentally verified with a good agreement. Based on the experimental setup, linearly polarized beams with different polarization angles are steered with high accuracy. The measured angular deviations are less than 5 μrad, which is on the same order of the accuracy of the measurement system. This polarization-independent 2 D laser beam steering scheme has potential application for nonmechanical laser communication, lidar, and other LC-based systems.展开更多
Integration of multiple diversified functionalities into a single,planar and ultra-compact device has become an emerging research area with fascinating possibilities for realization of very dense integration and minia...Integration of multiple diversified functionalities into a single,planar and ultra-compact device has become an emerging research area with fascinating possibilities for realization of very dense integration and miniaturization in photonics that requires addressing formidable challenges,particularly for operation in the visible range.Here we design,fabricate and experimentally demonstrate bifunctional gap-plasmon metasurfaces for visible light,allowing for simultaneous polarization-controlled unidirectional surface plasmon polariton(SPP)excitation and beam steering at normal incidence.The designed bifunctional metasurfaces,consisting of anisotropic gap-plasmon resonator arrays,produce two different linear phase gradients along the same direction for respective linear polarizations of incident light,resulting in distinctly different functionalities realized by the same metasurface.The proof-of-concept fabricated metasurfaces exhibit efficient(425%on average)unidirectional(extinction ratio 420 dB)SPP excitation within the wavelength range of 600–650 nm when illuminated with normally incident light polarized in the direction of the phase gradient.At the same time,broadband(580–700 nm)beam steering(30.6°–37.9°)is realized when normally incident light is polarized perpendicularly to the phase gradient direction.The bifunctional metasurfaces developed in this study can enable advanced research and applications related to other distinct functionalities for photonics integration.展开更多
基金support through his Master scholarshipThe Vicerrectoría de Investigación y Estudios de Posgrado(VIEP-BUAP)partially funded this work under grant number 00593-PV/2025.
文摘This paper aims to fuse two well-established and,at the same time,opposed control techniques,namely,model predictive control(MPC)and active disturbance rejection control(ADRC),to develop a dynamic motion controller for a laser beam steering system.The proposed technique uses the ADRC philosophy to lump disturbances and model uncertainties into a total disturbance.Then,the total disturbance is estimated via a discrete extended state disturbance observer(ESO),and it is used to(1)handle the system constraints in a quadratic optimization problem and(2)injected as a feedforward term to the plant to reject the total disturbance,together with the feedback term obtained by the MPC.The main advantage of the proposed approach is that the MPC is designed based on a straightforward integrator-chain model such that a simple convex optimization problem is performed.Several experiments show the real-time closed-loop performance regarding trajectory tracking and disturbance rejection.Owing to simplicity,the self-contained approach MPC+ESO becomes a Frugal MPC,which is computationally economical,adaptable,efficient,resilient,and suitable for applications where on-board computational resources are limited.
基金the National Science and Technology Major Project of China(No.2011ZX02402)the International Science & Technology Cooperation Program of China(No.2011DFR10010)
文摘We develope a simple method to stabilize the beam during propagation. Combination of the self-developed control module and the large diameter mirrors reconstruct the beam stabilization system, and some important procedures are presented, such as calibration arid average filter. The results show that the horizontal pointing and vertical pointing are stabilized to within 8.43 and 7.59 μrad, and the beam horizontal position and vertical position are stabilized to within 2.16 and 2.11 μm respectively. The regulating time is within 84 ms. Thus the method presented is effective for the current stabilization system applied in lithography tools.
基金supported by the Natural Science Basic Research Program of Shaanxi(2021JZ-18)the Natural Science Foundation of Guangdong Province of China(2021A1515010812)+1 种基金the Open Research Fund of National Mobile Communications Research Laboratory,Southeast University(2021D04)the Fundamental Research Funds for Central Universities,and the Innovation Fund of Xidian University。
文摘Orbital angular momentum(OAM)at radio frequency(RF)has attracted more and more attention as a novel approach of multiplexing a set of orthogonal OAM modes on the same frequency channel to achieve high spectral efficiency(SE).However,the precondition for maintaining the orthogonality among different OAM modes is perfect alignment of the transmit and receive uniform circular arrays(UCAs),which is difficult to be satisfied in practical wireless communication scenarios.Therefore,to achieve available multi-mode OAM broadband wireless communication,we first investigate the effect of oblique angles on the transmission performance of the multi-mode OAM broadband system in the non-parallel misalignment case.Then,we compare the UCA-based RF analog and baseband digital transceiver structures and corresponding beam steering schemes.Mathematical analysis and numerical simulations validate that the SE of the misaligned multi-mode OAM broadband system is quite low,while analog and digital beam steering(DBS)both can significantly improve the SE of the system.However,DBS can obtain higher SE than analog beam steering especially when the bandwidth and the number of array elements are large,which validates that the baseband digital transceiver with DBS is more suitable for multi-mode OAM broadband wireless communication systems in practice.
基金supported by the National Natural Science Foun-dation of China(Grant Nos.62371258,62335012,62205160,and 62435010)the Tianjin Youth Science and Technology Talent Project(Grant No.QN20230227)+1 种基金the Natural Science Foundation of Tianjin(Grant No.24JCYBJC01860)the Fundamental Research Funds for the Central Universities,Nan-kai University(Grant No.075-63253215).
文摘With the urgently increasing demand for high-speed and large-capacity communication trans-mission,there remains a critical need for tunable terahertz(THz)devices with multi-channel in 5G/6G communication systems.A magnetic phase-coding meta-atom(MPM)is formed by the heterogeneous integration of La:YIG magneto-optical(MO)materials and Si microstructures.The MPM couples the magnetic induction phase of spin states with the propagation phase and can simultaneously satisfy the required output phase for dual frequencies under various external magnetic fields to realize the dynamic beam steering among multiple channels at 0.25 and 0.5 THz.The energy ratio of the target direction can reach 96.5%,and the nonreciprocal one-way transmission with a max isolation of 29.8 dB is realized due to the nonreciprocal phase shift of the MO layer.This nonreciprocal mechanism of magnetic induction reshaping of wavefront significantly holds promise for advancing integrated multi-functional THz devices with the characteristics of low-crosstalk,multi-channel,and multi-frequency,and has great potential to promote the development of THz large-capacity and high-speed communication.
基金supported by the National Natural Science Foundation of China (10972014)
文摘The traditional one-dimensional ultrasonic beam steering has time delay and is thus a complicated problem. A numerical model of ultrasonic beam steering using Neumann boundary condition in multiplysics is presented in the present paper. This model is based on the discrete wave number method that has been proved theoretically to satisfy the continuous conditions. The propagating angle of novel model is a function of the distance instead of the time domain. The propagating wave fronts at desired angles are simulated with the single line sources for plane wave. The result indicates that any beam angle can be steered by discrete line elements resources without any time delay.
基金supported by the National High Technology Research and Development Program of China(Grant No.2009AA8042017)the Postdoctoral Science Foundation of University of Electronic Science and Technology of China
文摘To meet the application need for agile precision beam steering, a novel liquid crystal prism device with a simple structure, convenient control, low cost and applicable performance is presented, and analysed theoretically and experimentally. The relationships between the optical path and the thickness of the liquid crystal cell under different voltages are investigated quantitatively by using a theoretical model. Analysis results show that the optical path profile of the liquid crystal prism has a quasi-linear slope and the standard deviation of the linear slope is less than 16 nm. The slope ratio can be changed by a voltage, which achieves the programmable beam steering and control. Practical liquid crystal prism devices are fabricated. Their deflection angles and wavefront profiles with different voltages are experimentally tested. The results are in good agreement with the simulated results. The results imply that the agile beam steering in a scope of 100μrad with a micro-rad resolution is substantiated in the device. The two-dimensional beam steering is also achieved by cascading two liquid crystal prism devices.
基金Project supported by the National Basic Research Program of China(Grant Nos.2018YFA0209103 and 2018YFB2200504)the National Natural Science Foundation of China(Grant Nos.61991430,61774146,61790583,61674144,and 61774150)the Key Projects of the Chinese Academy of Sciences(Grant Nos.2018147,YJKYYQ20190002,QYZDJ-SSW-JSC027,and XDB43000000).
文摘A beam steering effect of high-power quantum cascade(QC) lasers emitting at 4.6 μm was investigated. The continuous wave(CW) output power of an uncoated, 6-mm-long, 7.5-μm-wide buried-heterostructure QC laser at 25℃ was as high as 854.2 m W. The maximum beam steering angle was offset by ±14.2° from the facet normal(0°) in pulsed mode. The phenomenon was judged explicitly by combining the diffraction limit theory and Fourier transform of the spectra. It was also verified by finite element method software simulation and the calculation of two-dimensional(2 D)effective-index model. The observed steering is consistent with a theory for coherence between the two lowest order lateral modes. Therefore, we have established an intrinsic linkage between the spectral instabilities and the beam steering by using the Fourier transform of the spectra, and further presented an extremely valid method to judge the beam steering. The content of this method includes both three equidistant peak positions in the Fourier transform of the spectra and the beam quality located between once the diffraction limit(DL) and twice the DL.
基金supported by the National Natural Science Foundation of China(Grant No.61372034)
文摘We propose an anisotropic planar transmitting metasurface, which has the ability to manipulate orthogonally-polarized electromagnetic waves in the reflection and refraction modes respectively. The metasurface is composed of four layered rectangular patches spaced by three layered dielectric isolators each with a thickness of 0.15λ0 at 15 GHz. By tailoring the sizes of the patches, the metasurface functions as a band-stop filter for the y-polarzied wave and a band-pass filter for the x-polarized wave operating from 14 GHz to 16 GHz. Moreover the phases of the transmitting x-polarized wave can be modulated at about 15 GHz, which contributes to beam steering according to the general refraction law. Experimental results are in good accordance with the simulated ones, in which the reflection efficiency is almost 100% while the transmission efficiency of the x-polarized wave reaches 80% at 15 GHz. Besides, the transmitted x-polarized wave is effectively manipulated from 14 GHz to 16 GHz.
文摘Orbital Angular Momentum(OAM)is an intrinsic feature of electromagnetic waves which has recently found many applications in several areas in radio and optics.In this paper,we use OAM wave characteristics to present a simple method for beam steering over both elevation and azimuth planes.The design overcomes some limitations of traditional steering methods,such as limited dynamic range of steering,the design complexity,bulky size of the steering structure,the limited bandwidth of operation,and low gain.Based on OAM wave characteristics,the proposed steering method avoids design complexities by adopting a simple method for generating the OAM-carrying waves.The waves are generated by an array of Planar Circular Dipole(PCD)elements.These elements are designed to cover a wide bandwidth range between 3 and 30 GHz.The transmitting array shows an enhanced gain value from 8.5 dBi to almost 11.5 dBi at the broadside angle.Besides the enhanced PCD-based OAM generation,the novelty of the design lies in a new method of beam steering.Beam steering is then performed by controlling the electrical feeding of the PCD elements;the beam azimuthal location is managed by turning off some of the PCD elements,while the elevation is determined by changing the gradient phase of excitation for the turned-on PCD elements.Detailed analysis of the steering method is carried out by finding the mathematical model of the system and the generated waves.The performance has been verified through numerical simulators.
基金Supported by the‘Supporting First Action’Joint Foundation for Outstanding Postdoctoral Program under Grant Nos Y7YBSH0001 and Y7BSH14001the National Natural Science Foundation of China under Grant No 61434006the National Key Basic Research Program of China under Grant No 2017YFB0102302
文摘Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences among elements, inter-element spacing, element size and emitted wavelength is analyzed detailedly and systematically. We design and fabricate 1×2 implant defined VCSEL arrays for optimum beam steering performance. Electroni- cally controlled beam steering with a maximum deflection angle of 1.6° is successfully achieved in the 1 × 2 VCSEL arrays. The percentage of the power in the central lobe is above 39% when steering. The results show that the steering is controllable. Compared with other beam steering methods, the fabrication process is simple and of low cost.
基金Project supported by the National Key Research and Development Program of China (Grant No.2021YFA1401001)the National Natural Science Foundation of China (Grant No.62371355)。
文摘A 1-bit electronically controlled metasurface reflectarray is presented to achieve beam steering with multiple polarization manipulations. A metsurface unit cell loaded by two PIN diodes is designed. By switching the two PIN diodes between ON and OFF states, the isotropic and anisotropic reflections can be flexibly achieved. For either the isotropic reflection or the anisotropic reflection, the two operation states achieve the reflection coefficients with approximately equal magnitude and 180°out of phase, thus giving rise to the isotropic/anisotropic 1-bit metasurface unit cells. With the 1-bit unit cells, a 12-by-12 metasurface reflectarray is optimally designed and fabricated. Under either y-or x-polarized incident wave illumination, the reflectarray can achieve the co-polarized and cross-polarized beam scanning, respectively, with the peak gains of 20.08 d Bi and 17.26 d Bi within the scan range of about ±50°. With the right-handed circular polarization(RHCP) excitation, the left-handed circular polarization(LHCP) radiation with the peak gain of 16.98 d Bic can be achieved within the scan range of ±50°. Good agreement between the experimental results and the simulation results are observed for 2D beam steering and polarization manipulation capabilities.
文摘This paper presents the design and implementation of a miniaturized beam steering network that produces broadside beams when it is fed with a compact antenna array.Butler Matrix(BM)was used as the beam steering network.It was completely built from a miniaturized 3 dB hybrid-couplers in planar microstrip technology.It was configured by feeding the BM with a Planar Inverted-E Antenna(PIEA)array separated at 0.3λas against the 0.5λseparation.This makes the BM produce a major radiation pattern at the broadside.Apart from the miniaturization,no modification was made from the BM side.However,employing effective mutual coupling reduction techniques helped to design the compact PIEA array.The validity of this BM based multibeam PIEA array was demonstrated by comparing the simulation results of the reflection coefficients,transmissions coefficients and the radiation pattern with measurements.The measurement results showed good agreement with simulations.
文摘This paper provides a modified fast adaptive algorithm for digital beamforming. It is analgorithm with strict constraint minimum power sampling matrix gradient (CSMG). It has merits ofboth traditional sampling mains gradient (SMG) and strictly constrained minimum power adaptivealgorithm. 16-element uniform circular array is selected. Some results of computer simulation aregiven. The results indicate that the beam direction will change with constraint angle and can beadaptable to adjust zero very well. The algorithm is fast convergent.
文摘<div style="text-align:justify;"> In this work, a design of a compact optical MEMS-based lidar scanning system with a large field of view (FOV) and small distortion is presented. The scanning system applies an off-axis structure and the length of the system can be reduced to about 10 cm in an optimized way. Simulation results show that a large FOV is achieved under a uniform scanning scheme. In addition, the spot size less than 20 cm at distance of 100 m is also realized. The optical scanning system can be used for the vehicle-mounted Lidar. </div>
文摘Dispersive optical phased arrays(DOPAs)offer a method for fast 2D beam scanning for solid-state LiDAR with a pure passive operation,and therefore low control complexity and low power consumption.However,in terms of scalability,state-of-the-art DOPAs do not easily achieve a balanced performance over the specifications of longrange LiDAR,including the number of pixels(resolvable points)and beam quality.Here,we experimentally demonstrate the pixelated DOPA concept,which overcomes the scaling challenges of classical(continuous)DOPAs by introducing a new design degree of freedom:the discretization of the optical delay lines distribution network into blocks.We also present the first demonstration of the unbalanced splitter tree architecture for the DOPA distribution network,incorporated in both the continuous DOPA and the pixelated DOPA variations.The small-scale demonstration circuits can scan over a field of view of 15°×7.2°,where the continuous DOPA provides 16×25 pixels,while the pixelated DOPA provides 4×25 pixels,for a 1500 to 1600 nm wavelength sweep.The pixelated DOPA exhibits a side lobe suppression ratio with a median of 7.6 dB,which is higher than that of the continuous version,with a median of 3.6 dB.In addition,the ratio of the main beam to the background radiation pattern is 11 dB(median value)for the pixelated DOPA,while for the continuous DOPA,it is 9.5 dB.This is an indication of a higher beam quality and lower phase errors in the pixelated DOPA.The degree of discretization,combined with other design parameters,will potentially enable better control over the beam quality,while setting practical values for the number of pixels for large-scale DOPAs.
基金supported by the Key Research and Development Program of Hainan Province(No.ZDYF2023GXJS016)the National Key Research and Development Program of China(No.2022YFC2808200)。
文摘This study examines paramagnetic liquids for optical beam steering in optical wireless communication(OWC)systems.By employing magnetic actuation,effective optical beam control was achieved for both free-space optics(FSO)and underwater wireless optical communication(UWOC).Experimental findings revealed that dysprosium nitrate provided the highest beam steering angles of 5.99°in the±X direction and 5.73°in the±Y direction.Additionally,power loss analysis indicated minimal absorption and scattering for dysprosium nitrate and gadolinium nitrate.The system achieved high-speed data rates of 2.1 Gbps for FSO and 1.9 Gbps for UWOC systems,showcasing the promise of this technology.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2023YFB3811400 and 2022YFB3806000)the National Natural Science Foundation of China(Grant No.12074314)+1 种基金the Science and Technology New Star Program of Shaanxi Province,China(Grant No.2023KJXX-148)the Fundamental Research Funds for the Central Universities。
文摘The emergent metagrating,with its unique and flexible beam shaping capabilities,offers new paths to efficient modulation of acoustic waves.In this work,an acoustic metagrating is demonstrated for high-efficiency and wide-angle anomalous refraction.It is shown that the normal reflection and transmission can be totally suppressed by properly modulating the amplitude and phase characteristics of the metagrating supercells for high-efficiency anomalous refraction.The anomalous refraction behavior is achieved in the wide range of incident angles from 28°to 78°,and the efficiency of-1st order diffraction is higher than 90%by finely designing the metagrating structure.The anomalous refraction behaviors are verified experimentally at incidence angle of 28°,45°,and 78°,respectively.The demonstrated metagrating is anticipated to possess efficient wide-angle composite wavefront engineering applications in such fields as communications.
基金National Research Foundation(NRF)grants(RS-2024-00356928,RS-2024-00462912,RS-2024-00416272,RS-2024-00337012,RS-2024-00408286)funded by the Ministry of Science and ICT(MSIT)of the Korean government.K.W.acknowledges the NRF grant(RS-2023-00280938)funded by the MSIT of the Korean government.
文摘Since flat optics has the feature to implement a compact system,they are widely used in various applications to replace bulky refractive optics.However,they suffer from chromatic aberrations due to dispersion,limiting their effectiveness to a narrow wavelength range.Consequently,diffractive optics has been applied for dynamic beam steering within a specific wavelength region or for static steering across multiple wavelengths.This limitation has made it challenging to implement dynamic beam steering in full-color display applications.To address this issue,we developed a multi-wavelength-based optical architecture that mitigates chromatic aberrations.This system incorporates color-selective retarders,half-wave plates,polarization plates,and beam deflectors.We experimentally demonstrated an achromatic beam deflector using a dynamic phase array in transmission mode,achieving continuous tunable beam steering over multiple wavelengths at 460,520,and 638 nm.
基金supported by the National Science Foundation of China(NSFC)(Nos.61405029,91438108,and61231012)the Shanghai Aerospace Science and Technology(SAST)(No.2015087)
文摘A polarization-independent nonmechanical laser beam steering scheme is proposed to realize continuous two-dimensional（2 D） scanning with high efficiency, where the core components are two polarization-dependent devices, which are called liquid crystal optical phased arrays（LC-OPAs）. These two one-dimensional（1D） devices are orthogonally cascaded to work on the state of azimuthal and elevation steering, respectively. Properties of polarization independence as well as 2D beam steering are mathematically and experimentally verified with a good agreement. Based on the experimental setup, linearly polarized beams with different polarization angles are steered with high accuracy. The measured angular deviations are less than 5 μrad, which is on the same order of the accuracy of the measurement system. This polarization-independent 2 D laser beam steering scheme has potential application for nonmechanical laser communication, lidar, and other LC-based systems.
基金the financial support from the European Research Council,Grant 341054(PLAQNAP)the University of Southern Denmark(SDU 2020).
文摘Integration of multiple diversified functionalities into a single,planar and ultra-compact device has become an emerging research area with fascinating possibilities for realization of very dense integration and miniaturization in photonics that requires addressing formidable challenges,particularly for operation in the visible range.Here we design,fabricate and experimentally demonstrate bifunctional gap-plasmon metasurfaces for visible light,allowing for simultaneous polarization-controlled unidirectional surface plasmon polariton(SPP)excitation and beam steering at normal incidence.The designed bifunctional metasurfaces,consisting of anisotropic gap-plasmon resonator arrays,produce two different linear phase gradients along the same direction for respective linear polarizations of incident light,resulting in distinctly different functionalities realized by the same metasurface.The proof-of-concept fabricated metasurfaces exhibit efficient(425%on average)unidirectional(extinction ratio 420 dB)SPP excitation within the wavelength range of 600–650 nm when illuminated with normally incident light polarized in the direction of the phase gradient.At the same time,broadband(580–700 nm)beam steering(30.6°–37.9°)is realized when normally incident light is polarized perpendicularly to the phase gradient direction.The bifunctional metasurfaces developed in this study can enable advanced research and applications related to other distinct functionalities for photonics integration.
