Pancharatnam–Berry(PB)phase metasurface,as a special class of gradient metasurfaces,has been paid much attention owing to the robust performance for phase control of circularly polarized waves.Herein,we present an el...Pancharatnam–Berry(PB)phase metasurface,as a special class of gradient metasurfaces,has been paid much attention owing to the robust performance for phase control of circularly polarized waves.Herein,we present an element-based polarizer for the first step,which enables the incident electromagnetic waves into the cross-polarized waves with the relative bandwidth of 71%,and the polarization conversion ratio exceeds 90%at 6.9–14.5 GHz.Then an eight-elements coding polarizer based on the PB phase is presented for the applications on beam control and radar cross section reduction.The simulated values indicate that the reduction of radar cross section is more than 10 dB at 6–16 GHz.Our work reveals the availability of manipulating the waves,beamforming in communication systems and electromagnetic stealth,and so on.展开更多
The main characteristic feature of deep penetration laser beam welding is a large temperature difference between the plasma cavity(keyhole)in the weld pool centre and the melting/solidification front.Large temperature...The main characteristic feature of deep penetration laser beam welding is a large temperature difference between the plasma cavity(keyhole)in the weld pool centre and the melting/solidification front.Large temperature gradients in the weld pool result in very intensive thermocapillary(Marangoni)convection.The weld pool surface width becomes very large and unstable.However,an externally applied oscillating magnetic field can stabilize the surface of the melt.In the present work this technology was used to stabilize the weld pool surface in partial penetration 4.4 kW Nd:YAG laser beam welding of AW-5754 aluminium alloy in PA position.An AC magnet was mounted on the laser welding head.The oscillating magnetic field was oriented perpendicular to the welding direction.It was found that the AC magnetic field can drastically reduce the surface roughness of welds.X-ray image analysis shows a drastic reduction of welds porosity.This effect can be explained as a result of electromagnetic rectification of the melt.展开更多
Based on ANSYS, an analytical model was established for H beam during controlled cooling. The tempera-ture fields during controlled cooling and air cooling were analyzed and the microstructure and mechanical propertie...Based on ANSYS, an analytical model was established for H beam during controlled cooling. The tempera-ture fields during controlled cooling and air cooling were analyzed and the microstructure and mechanical properties for different parts of H-beam were discussed in detail. After the H-beam was controlled cooled for 4.5 s, its mean surface temperature decreased from 850 to 460 ℃, and the lowest and the highest temperatures were measured at edge of flange and at R corner, respectively. Whereas, for the H-beam air cooled for 30 s, the mean temperature at R corner and web was 700 and 540 ℃, respectively. The microstructures for different parts of H-beam consisted of ferrite and pearlite, and the grain size at R corner was coarser than those at flange and web. The difference of yield and tensile strengths of web, flange and R corner was within 30 MPa, and the elongation was similar. The changes of microstructure were in good agreement with that of temperature field. In addition, the results show that the uni formity of microstructure and mechanical properties can be improved by increasing water flow rate at R corner.展开更多
A distributed control system of Neutral Beam Injector （NBI） on the Experimental Advanced Superconducting Tokamak （EAST-NBI） is briefly presented in this paper. The control system is developed in accordance with th...A distributed control system of Neutral Beam Injector （NBI） on the Experimental Advanced Superconducting Tokamak （EAST-NBI） is briefly presented in this paper. The control system is developed in accordance with the experimental operational characteristics of the EAST- NBI. The NBI control system （NBICS）, which is based on the computer network technologies and classified according to the control levels, consists of three levels： a remote monitoring layer, a server control layer, and a field control layer. The 3-layer architecture is capable of extending the system functions and upgrading devices. The timing system provides the reference clock of the synchronization and interlock for the EAST-NBI system. An interlock system ensures the safety of the experiment operators and field devices. Both of the ion sources of the beamline are designed to operate independently. This lays an important foundation for developing a control system for the second beamline on EAST. Experimental results demonstrate that the NBICS meets functional requirements of the EAST-NBI control, and makes experimental operations visual and automatic.展开更多
A set of data-processing middleware for a high-powered neutral beam injection（NBI） control system is presented in this paper.The middleware,based on TCP/IP and multi-threading technologies,focuses mainly on data pro...A set of data-processing middleware for a high-powered neutral beam injection（NBI） control system is presented in this paper.The middleware,based on TCP/IP and multi-threading technologies,focuses mainly on data processing and transmission.It separates the data processing and compression from data acquisition and storage.It provides universal transmitting interfaces for different software circumstances,such as WinCC,LabView and other measurement systems. The experimental data acquired on Windows,QNX and Linux platforms are processed by the middleware and sent to the monitoring applications.There are three middleware deployment models：serial processing,parallel processing and alternate serial processing.By using these models,the middleware solves real-time data-processing problems on heterogeneous environmental acquisition hardware with different operating systems and data applications.展开更多
In this paper, the disturbance propagation and active vibration control of a finite L-shaped beam axe studied. The dynamic response of the structure is obtained by the travelling wave approach. The active vibration su...In this paper, the disturbance propagation and active vibration control of a finite L-shaped beam axe studied. The dynamic response of the structure is obtained by the travelling wave approach. The active vibration suppression of the finite L-shaped beam is performed based on the structural vibration power flow. In the numerical calculation, the influences of the near field effect of the error sensor and the small error of the control forces on the control results are all considered. The simulation results indicate that the structural vibration response in the medium and high frequency regions can be effectively computed by the travelling wave method. The effect of the active control by controlling the power flow is much better than that by controlling the acceleration in some cases. And the control results by the power flow method are slightly affected by the locations of the error sensor and the small error of the control forces.展开更多
Analytical propagation formulas are derived for partially coherent controllable dark-hollow beams （CDHBs） through a thin lens based on the generalized Huygens-Fresnel integral. The expressions of the position for ma...Analytical propagation formulas are derived for partially coherent controllable dark-hollow beams （CDHBs） through a thin lens based on the generalized Huygens-Fresnel integral. The expressions of the position for maximum irradiance on-axis and the relative focal shift are evaluated by the analytical propagation formulas. Our numerical results show that both the relative focal shift and the effective beam width of focused partially coherent CDHBs are mainly determined by the initial transverse coherence width 6g and the Fresnel number Nw, which are also affected by the changes of both the dark-size adjusting parameter p and the order N of CDHBs.展开更多
This paper aims at modeling and developing vibration control methods for a flexible piezoelectric beam. A collocated sensor/actuator placement is used. Finite element analysis （FEA） method is adopted to derive the d...This paper aims at modeling and developing vibration control methods for a flexible piezoelectric beam. A collocated sensor/actuator placement is used. Finite element analysis （FEA） method is adopted to derive the dynamics model of the system. A back propagation neural network （BPNN） based proportional-derivative （PD） algorithm is applied to suppress the vibration. Simulation and experiments are conducted using the FEA model and BPNN-PD control law. Experimental results show good agreement with the simulation results using finite element modeling and the neural network control algorithm.展开更多
Adaptive control of a flexible beam system preceded by an unknown dead-zonein the driving motor is investigated in state space form. By introducing an important lemma forsimplifying error equation between the flexible...Adaptive control of a flexible beam system preceded by an unknown dead-zonein the driving motor is investigated in state space form. By introducing an important lemma forsimplifying error equation between the flexible beam model and the matching reference model, arobust adaptive control scheme is developed by involving the dead-zone inverse terms. The newadaptive control law ensures global stability of the entire system and achieves desired trackingprecision even when the slopes of the dead-zone are not equal. Simulations performed on a typicalflexible beam system illustrate and clarify the validity of this approach.展开更多
The wave propagation approach is presented to research the active vibration control of two-beam structures.Considering the continuity of the generalized displacement and the equilibrium of the generalized force at the...The wave propagation approach is presented to research the active vibration control of two-beam structures.Considering the continuity of the generalized displacement and the equilibrium of the generalized force at the discontinuity,the wave reflection and transmission coefficients are calculated.Wave control is applied somewhere upstream or downstream to two-beam structures.Vibrations of two coupled beams per unit disturbance are investigated.The results show that wave control is efficient,and the influence of the thickness ratio of two-beam structures on control location is discussed.展开更多
Based on Hartmann-Shack sensor technique, an online thin film stress measuring system was introduced to measure the film stresses of TiO2 and SiO2, and comparison was made between the film stresses prepared respective...Based on Hartmann-Shack sensor technique, an online thin film stress measuring system was introduced to measure the film stresses of TiO2 and SiO2, and comparison was made between the film stresses prepared respectively by the conventional process and the ion-beam assisted deposition. The effect of ion-beam assisted deposition on the film stresses of TiO2 and SiO2 was investigated in details, and the stress control methodologies using on-line adjustment and film doping were put forward. The results show that the film stress value of TiO2 prepared by ion-beam assisted deposition is 40 MPa lower than that prepared by conventional process, and the stress of TiO2 film changes gradually from tensile stress into compressive stress with increasing ion energy; while the film stress of SiO2 is a tensile stress under ion-beam assisted deposition because of the ion-beam sputtering effect, and the film refractive index decreases with increasing ion energy. A dynamic film stress control can be achieved through in-situ adjustment of the processing parameters based on the online film stress measuring technique, and the intrinsic stress of film can be effectively changed through film doping.展开更多
A flexible structure consisting of a Euler-Bernoulli beam with co-located sensors and actuators is considered. The control is a shear force in proportion to velocity. It is known that uniform exponential stability can...A flexible structure consisting of a Euler-Bernoulli beam with co-located sensors and actuators is considered. The control is a shear force in proportion to velocity. It is known that uniform exponential stability can be achieved with velocity feedback. A sensitivity asymptotic analysis of the system's eigenvalues and eigenfunctions is set up. The authors prove that, for K-1 epsilon (0, + infinity), all of the generalized eigenvectors of A form a Riesz basis of H. It is also proved that the optimal exponential decay rate can be obtained from the spectrum of the system for 0 < K-1 < + infinity.展开更多
Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forwar...Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forward direction. Thus, this reference direction can be considered as an auxiliary "time" beam axis. In this paper, the optimal beam matching control problem for a low energy transport system in a charged particle accelerator is considered. The beam matching procedure is formulated as a finite "time" dynamic optimization problem, in which the Kapchinsky-Vladimirsky(K-V) coupled envelope equations model beam dynamics. The aim is to drive any arbitrary initial beam state to a prescribed target state, as well as to track reference trajectory as closely as possible, through the control of the lens focusing strengths in the beam matching channel. We first apply the control parameterization method to optimize lens focusing strengths, and then combine this with the time-scaling transformation technique to further optimize the drift and lens length in the beam matching channel. The exact gradients of the cost function with respect to the decision parameters are computed explicitly through the state sensitivity-based analysis method. Finally, numerical simulations are illustrated to verify the effectiveness of the proposed approach.展开更多
An optimal(practical) stabilization problem is formulated in an inverse approach and solved for nonlinear evolution systems in Hilbert spaces. The optimal control design ensures global well-posedness and global practi...An optimal(practical) stabilization problem is formulated in an inverse approach and solved for nonlinear evolution systems in Hilbert spaces. The optimal control design ensures global well-posedness and global practical K∞-exponential stability of the closed-loop system, minimizes a cost functional,which appropriately penalizes both state and control in the sense that it is positive definite(and radially unbounded) in the state and control, without having to solve a Hamilton-Jacobi-Belman equation(HJBE). The Lyapunov functional used in the control design explicitly solves a family of HJBEs. The results are applied to design inverse optimal boundary stabilization control laws for extensible and shearable slender beams governed by fully nonlinear partial differential equations.展开更多
The piezoelectric materials are used to investigate the active vibration control of ordered/disordered periodic two-span beams. The equation of motion of each sub-beam with piezoelectric patches is established based o...The piezoelectric materials are used to investigate the active vibration control of ordered/disordered periodic two-span beams. The equation of motion of each sub-beam with piezoelectric patches is established based on Hamilton＇s principle with an assumed mode method. The velocity feedback control algorithm is used to design the controller. The free and forced vibration behaviors of the two-span beams with the piezoelectric actuators and sensors are analyzed. The vibration properties of the disordered two-span beams caused by misplacing the middle support are also researched. In addition, the effects of the length disorder degree on the vibration performances of the disordered beams are investigated. From the numerical results, it can be concluded that the disorder in the length of the periodic two-span beams will cause vibration localizations of the free and forced vibrations of the structure, and the vibration localization phenomenon will be more and more obvious when the length difference between the two sub-beams increases. Moreover, when the velocity feedback control is used, both the forced and the free vibrations will be suppressed. Meanwhile, the vibration behaviors of the two-span beam are tuned.展开更多
We present an experimental study on tilt-tip（TT） and phase-locking（PL） control in a coherent beam combination（CBC） system of adaptive fiber laser array.The TT control is performed using the adaptive fiber-optics...We present an experimental study on tilt-tip（TT） and phase-locking（PL） control in a coherent beam combination（CBC） system of adaptive fiber laser array.The TT control is performed using the adaptive fiber-optics collimator（AFOC）,and the PL control is realized by the phase modulator（PM）.Cascaded and simultaneous controls of TT and PL using stochastic parallel gradient descent（SPGD） algorithm are investigated in this paper.Two-fiber-laser-,four-fiber-laser-,and six-fiber-laser-arrays are employed to study the TT and PL control.In the cascaded control system,only one high-speed CMOS camera is used to collect beam data and a computer is used as the controller.In a simultaneous control system one high-speed CMOS camera and one photonic detector（PD） are employed,and a computer and a control circuit based on field programmable gate array（FPGA） are used as the controllers.Experimental results reveal that both cascaded and simultaneous controls of TT using AFOC and PL using PM in fiber laser array are feasible and effective.Cascaded control is more effective in static control situation and simultaneous control can be applied to the dynamic control system directly.The control signals of simultaneous PL and TT disturb each other obviously and TT and PL control may compete with each other,so the control effect is limited.展开更多
A backstepping control method is proposed for controlling beam halo-chaos in the periodic focusing channels （PFCs） of high-current ion accelerator. The analysis and numerical results show that the method, via adjust...A backstepping control method is proposed for controlling beam halo-chaos in the periodic focusing channels （PFCs） of high-current ion accelerator. The analysis and numerical results show that the method, via adjusting an exterior magnetic field, is effective to control beam halo chaos with five types of initial distribution ion beams, all statistical quantities of the beam halo-chaos are largely reduced, and the uniformity of ion beam is improved. This control method has an important value of application, for the exterior magnetic field can be easily adjusted in the periodical magnetic focusing channels in experiment.展开更多
The timing and master control logic （MCL） units are the most important function units of the diagnostic neutral beam （DNB） power supply control system. The units control the operation of nine power supply subsyste...The timing and master control logic （MCL） units are the most important function units of the diagnostic neutral beam （DNB） power supply control system. The units control the operation of nine power supply subsystems of the DNB system, and provide protection for the DNB system from faults such as beam source arc down. Based on the characteristics of the DNB power supply system, the timing and MCL units have been designed, fabricated and tested. Experiments prove that the timing unit is convenient, flexible and reliable, and the MCL is functional.展开更多
Aiming at the paraffin-deposition problem of a beam well, the automatic paraffin-controlling device is designed by making use of ratchet-pallet mechanism, cam mechanism and modern designing method. The device has four...Aiming at the paraffin-deposition problem of a beam well, the automatic paraffin-controlling device is designed by making use of ratchet-pallet mechanism, cam mechanism and modern designing method. The device has four main functions： paraffin-controlling, paraffin removal, centralizing the pumping rod, and improving the safety of well tubing. This device integrates the advantages of the paraffin control, such as strong magnetic paraffin controlling and mechanical paraffin-cutting. Theoretical analysis shows that this device has fine working reliability. It turns out to be a new device which can solve the paraffin-deposition problem of a beam well economically and efficiently.展开更多
Neutral Beam Injection control system (NBICS) is constructed to measure the plasma current, Magnet current, vacuum pressure, cryopump temperature, control water cooling, filament voltage, and power supply, etc. The NB...Neutral Beam Injection control system (NBICS) is constructed to measure the plasma current, Magnet current, vacuum pressure, cryopump temperature, control water cooling, filament voltage, and power supply, etc. The NBICS, consisting mainly of a Programmable Logic Controller (PLC) subsystem, data acquisition and processing subsystem and cryopump and vacuum pressure monitoring subsystem, has successfully been used on a NBI device. In this article, the design of NBICS on HT-7 is discussed and each subsystem is described in particular. In addition, some experimental results are reported which are very important data for further research related to the HT-7 tokamak.展开更多
基金supported by the National Natural Science Foundation of China(No.42274189)the Project of Science and Technology of Shaanxi(No.2021JM-395).
文摘Pancharatnam–Berry(PB)phase metasurface,as a special class of gradient metasurfaces,has been paid much attention owing to the robust performance for phase control of circularly polarized waves.Herein,we present an element-based polarizer for the first step,which enables the incident electromagnetic waves into the cross-polarized waves with the relative bandwidth of 71%,and the polarization conversion ratio exceeds 90%at 6.9–14.5 GHz.Then an eight-elements coding polarizer based on the PB phase is presented for the applications on beam control and radar cross section reduction.The simulated values indicate that the reduction of radar cross section is more than 10 dB at 6–16 GHz.Our work reveals the availability of manipulating the waves,beamforming in communication systems and electromagnetic stealth,and so on.
基金Item Sponsored by the German Collaborative Industrial Research Program (IGF) and the German Welding Society (DVS) Under Grant Nr.IGF-17.265 N/DVS-06.078
文摘The main characteristic feature of deep penetration laser beam welding is a large temperature difference between the plasma cavity(keyhole)in the weld pool centre and the melting/solidification front.Large temperature gradients in the weld pool result in very intensive thermocapillary(Marangoni)convection.The weld pool surface width becomes very large and unstable.However,an externally applied oscillating magnetic field can stabilize the surface of the melt.In the present work this technology was used to stabilize the weld pool surface in partial penetration 4.4 kW Nd:YAG laser beam welding of AW-5754 aluminium alloy in PA position.An AC magnet was mounted on the laser welding head.The oscillating magnetic field was oriented perpendicular to the welding direction.It was found that the AC magnetic field can drastically reduce the surface roughness of welds.X-ray image analysis shows a drastic reduction of welds porosity.This effect can be explained as a result of electromagnetic rectification of the melt.
基金Item Sponsored by National Science and Technology Support Project of China(2007BAE30B05)
文摘Based on ANSYS, an analytical model was established for H beam during controlled cooling. The tempera-ture fields during controlled cooling and air cooling were analyzed and the microstructure and mechanical properties for different parts of H-beam were discussed in detail. After the H-beam was controlled cooled for 4.5 s, its mean surface temperature decreased from 850 to 460 ℃, and the lowest and the highest temperatures were measured at edge of flange and at R corner, respectively. Whereas, for the H-beam air cooled for 30 s, the mean temperature at R corner and web was 700 and 540 ℃, respectively. The microstructures for different parts of H-beam consisted of ferrite and pearlite, and the grain size at R corner was coarser than those at flange and web. The difference of yield and tensile strengths of web, flange and R corner was within 30 MPa, and the elongation was similar. The changes of microstructure were in good agreement with that of temperature field. In addition, the results show that the uni formity of microstructure and mechanical properties can be improved by increasing water flow rate at R corner.
基金supported by the National Magnetic Confinement Fusion Science Program of China(No.2013GB101001)
文摘A distributed control system of Neutral Beam Injector （NBI） on the Experimental Advanced Superconducting Tokamak （EAST-NBI） is briefly presented in this paper. The control system is developed in accordance with the experimental operational characteristics of the EAST- NBI. The NBI control system （NBICS）, which is based on the computer network technologies and classified according to the control levels, consists of three levels： a remote monitoring layer, a server control layer, and a field control layer. The 3-layer architecture is capable of extending the system functions and upgrading devices. The timing system provides the reference clock of the synchronization and interlock for the EAST-NBI system. An interlock system ensures the safety of the experiment operators and field devices. Both of the ion sources of the beamline are designed to operate independently. This lays an important foundation for developing a control system for the second beamline on EAST. Experimental results demonstrate that the NBICS meets functional requirements of the EAST-NBI control, and makes experimental operations visual and automatic.
基金supported by National Natural Science Foundation of China(No.10875146)
文摘A set of data-processing middleware for a high-powered neutral beam injection（NBI） control system is presented in this paper.The middleware,based on TCP/IP and multi-threading technologies,focuses mainly on data processing and transmission.It separates the data processing and compression from data acquisition and storage.It provides universal transmitting interfaces for different software circumstances,such as WinCC,LabView and other measurement systems. The experimental data acquired on Windows,QNX and Linux platforms are processed by the middleware and sent to the monitoring applications.There are three middleware deployment models：serial processing,parallel processing and alternate serial processing.By using these models,the middleware solves real-time data-processing problems on heterogeneous environmental acquisition hardware with different operating systems and data applications.
基金Project supported by the National Natural Science Foundation of China (Nos. 10672017 and 10632020)
文摘In this paper, the disturbance propagation and active vibration control of a finite L-shaped beam axe studied. The dynamic response of the structure is obtained by the travelling wave approach. The active vibration suppression of the finite L-shaped beam is performed based on the structural vibration power flow. In the numerical calculation, the influences of the near field effect of the error sensor and the small error of the control forces on the control results are all considered. The simulation results indicate that the structural vibration response in the medium and high frequency regions can be effectively computed by the travelling wave method. The effect of the active control by controlling the power flow is much better than that by controlling the acceleration in some cases. And the control results by the power flow method are slightly affected by the locations of the error sensor and the small error of the control forces.
基金Supported by the National Natural Science Foundation of China under Grant No 61201193
文摘Analytical propagation formulas are derived for partially coherent controllable dark-hollow beams （CDHBs） through a thin lens based on the generalized Huygens-Fresnel integral. The expressions of the position for maximum irradiance on-axis and the relative focal shift are evaluated by the analytical propagation formulas. Our numerical results show that both the relative focal shift and the effective beam width of focused partially coherent CDHBs are mainly determined by the initial transverse coherence width 6g and the Fresnel number Nw, which are also affected by the changes of both the dark-size adjusting parameter p and the order N of CDHBs.
基金Project supported by the Key Project(No.60934001)the General Projects(Nos.51175181and90505014)of the National Natural Science Foundation of Chinaby the Fundamental Research Funds for the Central Universities,SCUT(No.2012ZZ0060)
文摘This paper aims at modeling and developing vibration control methods for a flexible piezoelectric beam. A collocated sensor/actuator placement is used. Finite element analysis （FEA） method is adopted to derive the dynamics model of the system. A back propagation neural network （BPNN） based proportional-derivative （PD） algorithm is applied to suppress the vibration. Simulation and experiments are conducted using the FEA model and BPNN-PD control law. Experimental results show good agreement with the simulation results using finite element modeling and the neural network control algorithm.
基金This project is supported by National Natural Science Foundation of China (No. 59885002).
文摘Adaptive control of a flexible beam system preceded by an unknown dead-zonein the driving motor is investigated in state space form. By introducing an important lemma forsimplifying error equation between the flexible beam model and the matching reference model, arobust adaptive control scheme is developed by involving the dead-zone inverse terms. The newadaptive control law ensures global stability of the entire system and achieves desired trackingprecision even when the slopes of the dead-zone are not equal. Simulations performed on a typicalflexible beam system illustrate and clarify the validity of this approach.
基金Supported by the National Natural Science Foundation of China(11102047,11002037)the Special Funds of Central Colleges Basic Scientific Research Operating Expenses(HEUCF20111139)the Fundamental Research Foundation of Harbin Engineering University(002110260746)
文摘The wave propagation approach is presented to research the active vibration control of two-beam structures.Considering the continuity of the generalized displacement and the equilibrium of the generalized force at the discontinuity,the wave reflection and transmission coefficients are calculated.Wave control is applied somewhere upstream or downstream to two-beam structures.Vibrations of two coupled beams per unit disturbance are investigated.The results show that wave control is efficient,and the influence of the thickness ratio of two-beam structures on control location is discussed.
文摘Based on Hartmann-Shack sensor technique, an online thin film stress measuring system was introduced to measure the film stresses of TiO2 and SiO2, and comparison was made between the film stresses prepared respectively by the conventional process and the ion-beam assisted deposition. The effect of ion-beam assisted deposition on the film stresses of TiO2 and SiO2 was investigated in details, and the stress control methodologies using on-line adjustment and film doping were put forward. The results show that the film stress value of TiO2 prepared by ion-beam assisted deposition is 40 MPa lower than that prepared by conventional process, and the stress of TiO2 film changes gradually from tensile stress into compressive stress with increasing ion energy; while the film stress of SiO2 is a tensile stress under ion-beam assisted deposition because of the ion-beam sputtering effect, and the film refractive index decreases with increasing ion energy. A dynamic film stress control can be achieved through in-situ adjustment of the processing parameters based on the online film stress measuring technique, and the intrinsic stress of film can be effectively changed through film doping.
文摘A flexible structure consisting of a Euler-Bernoulli beam with co-located sensors and actuators is considered. The control is a shear force in proportion to velocity. It is known that uniform exponential stability can be achieved with velocity feedback. A sensitivity asymptotic analysis of the system's eigenvalues and eigenfunctions is set up. The authors prove that, for K-1 epsilon (0, + infinity), all of the generalized eigenvectors of A form a Riesz basis of H. It is also proved that the optimal exponential decay rate can be obtained from the spectrum of the system for 0 < K-1 < + infinity.
基金supported by the National Natural Science Foundation of China(61703114,61673126,61703217,U1701261)the Science and Technology Plan Project of Guangdong(2014B090907010,2015B010131014)
文摘Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forward direction. Thus, this reference direction can be considered as an auxiliary "time" beam axis. In this paper, the optimal beam matching control problem for a low energy transport system in a charged particle accelerator is considered. The beam matching procedure is formulated as a finite "time" dynamic optimization problem, in which the Kapchinsky-Vladimirsky(K-V) coupled envelope equations model beam dynamics. The aim is to drive any arbitrary initial beam state to a prescribed target state, as well as to track reference trajectory as closely as possible, through the control of the lens focusing strengths in the beam matching channel. We first apply the control parameterization method to optimize lens focusing strengths, and then combine this with the time-scaling transformation technique to further optimize the drift and lens length in the beam matching channel. The exact gradients of the cost function with respect to the decision parameters are computed explicitly through the state sensitivity-based analysis method. Finally, numerical simulations are illustrated to verify the effectiveness of the proposed approach.
文摘An optimal(practical) stabilization problem is formulated in an inverse approach and solved for nonlinear evolution systems in Hilbert spaces. The optimal control design ensures global well-posedness and global practical K∞-exponential stability of the closed-loop system, minimizes a cost functional,which appropriately penalizes both state and control in the sense that it is positive definite(and radially unbounded) in the state and control, without having to solve a Hamilton-Jacobi-Belman equation(HJBE). The Lyapunov functional used in the control design explicitly solves a family of HJBEs. The results are applied to design inverse optimal boundary stabilization control laws for extensible and shearable slender beams governed by fully nonlinear partial differential equations.
基金Project supported by the National Basic Research Program of China(973 Program)(No.2011CB711100)the National Natural Science Foundation of China(Nos.10672017 and11172084)
文摘The piezoelectric materials are used to investigate the active vibration control of ordered/disordered periodic two-span beams. The equation of motion of each sub-beam with piezoelectric patches is established based on Hamilton＇s principle with an assumed mode method. The velocity feedback control algorithm is used to design the controller. The free and forced vibration behaviors of the two-span beams with the piezoelectric actuators and sensors are analyzed. The vibration properties of the disordered two-span beams caused by misplacing the middle support are also researched. In addition, the effects of the length disorder degree on the vibration performances of the disordered beams are investigated. From the numerical results, it can be concluded that the disorder in the length of the periodic two-span beams will cause vibration localizations of the free and forced vibrations of the structure, and the vibration localization phenomenon will be more and more obvious when the length difference between the two sub-beams increases. Moreover, when the velocity feedback control is used, both the forced and the free vibrations will be suppressed. Meanwhile, the vibration behaviors of the two-span beam are tuned.
文摘We present an experimental study on tilt-tip（TT） and phase-locking（PL） control in a coherent beam combination（CBC） system of adaptive fiber laser array.The TT control is performed using the adaptive fiber-optics collimator（AFOC）,and the PL control is realized by the phase modulator（PM）.Cascaded and simultaneous controls of TT and PL using stochastic parallel gradient descent（SPGD） algorithm are investigated in this paper.Two-fiber-laser-,four-fiber-laser-,and six-fiber-laser-arrays are employed to study the TT and PL control.In the cascaded control system,only one high-speed CMOS camera is used to collect beam data and a computer is used as the controller.In a simultaneous control system one high-speed CMOS camera and one photonic detector（PD） are employed,and a computer and a control circuit based on field programmable gate array（FPGA） are used as the controllers.Experimental results reveal that both cascaded and simultaneous controls of TT using AFOC and PL using PM in fiber laser array are feasible and effective.Cascaded control is more effective in static control situation and simultaneous control can be applied to the dynamic control system directly.The control signals of simultaneous PL and TT disturb each other obviously and TT and PL control may compete with each other,so the control effect is limited.
基金Project supported by the Natural Science Foundation of Guangxi Province,China (Grant No 0640033)
文摘A backstepping control method is proposed for controlling beam halo-chaos in the periodic focusing channels （PFCs） of high-current ion accelerator. The analysis and numerical results show that the method, via adjusting an exterior magnetic field, is effective to control beam halo chaos with five types of initial distribution ion beams, all statistical quantities of the beam halo-chaos are largely reduced, and the uniformity of ion beam is improved. This control method has an important value of application, for the exterior magnetic field can be easily adjusted in the periodical magnetic focusing channels in experiment.
基金Meg-science Engineering Project of the Chinese Academy of Sciences
文摘The timing and master control logic （MCL） units are the most important function units of the diagnostic neutral beam （DNB） power supply control system. The units control the operation of nine power supply subsystems of the DNB system, and provide protection for the DNB system from faults such as beam source arc down. Based on the characteristics of the DNB power supply system, the timing and MCL units have been designed, fabricated and tested. Experiments prove that the timing unit is convenient, flexible and reliable, and the MCL is functional.
文摘Aiming at the paraffin-deposition problem of a beam well, the automatic paraffin-controlling device is designed by making use of ratchet-pallet mechanism, cam mechanism and modern designing method. The device has four main functions： paraffin-controlling, paraffin removal, centralizing the pumping rod, and improving the safety of well tubing. This device integrates the advantages of the paraffin control, such as strong magnetic paraffin controlling and mechanical paraffin-cutting. Theoretical analysis shows that this device has fine working reliability. It turns out to be a new device which can solve the paraffin-deposition problem of a beam well economically and efficiently.
基金The project supported by the Meg-science Engineering Project of the Chinese Academy of Sciences
文摘Neutral Beam Injection control system (NBICS) is constructed to measure the plasma current, Magnet current, vacuum pressure, cryopump temperature, control water cooling, filament voltage, and power supply, etc. The NBICS, consisting mainly of a Programmable Logic Controller (PLC) subsystem, data acquisition and processing subsystem and cryopump and vacuum pressure monitoring subsystem, has successfully been used on a NBI device. In this article, the design of NBICS on HT-7 is discussed and each subsystem is described in particular. In addition, some experimental results are reported which are very important data for further research related to the HT-7 tokamak.
