Extraction of a coal seam which lies not far below a heating goafcan be a major safety challenge. A force auxiliary ventilation system was adopted as a control method in successful extraction and recovery of the panel...Extraction of a coal seam which lies not far below a heating goafcan be a major safety challenge. A force auxiliary ventilation system was adopted as a control method in successful extraction and recovery of the panel 30110 of the #3-1 coal seam, which is about 30-40 rn below the heating goaf of the #2-2 seam at Longhua underground coal mine, Shanxi Province, China. Booster fans and ventilation control devices such as doors and regulators were used in the system. The results show that, provided that a force auxiliary ventilation system is properly designed to achieve a pressure balance between a panel and its overlying goat＇, the system can be used to extract a coal seam overlain by a heating goal. This paper describes the design, installation and performance of the ventilation system during the extraction and recovery phases of the oanel 30110.展开更多
Internal temperature is crucial to plant growth in the greenhouse. We investigated the patterns of constructing and managing greenhouses in Chongqing, and developed an algorithm of heating temperature for closed winte...Internal temperature is crucial to plant growth in the greenhouse. We investigated the patterns of constructing and managing greenhouses in Chongqing, and developed an algorithm of heating temperature for closed winter plastic greenhouses under the conditions of no man-made illumination, no ventilation and hot wind machine as the heating equipment, which are the most adopted pattern of greenhouses in Chongqing area. The algorithm includes two functions of temperature outside the greenhouse, which calculate the values of the warming estimation coefficient (WEC) and the gap between temperatures inside and outside the greenhouse with the measured data of outside temperature, and then give the value of internal temperature; the heat rating of heating facilities required by a greenhouse can be determined by this algorithm with given values of floor area and internal temperature, measured outside temperature and calculated WEC. Verification of the algorithm demonstrates a desirable accuracy of estimation. Algorithms of computing heating temperature for greenhouses of different constructing and managing patterns and in different geographic conditions can also be derived in a similar way. This research presents a paradigm for developing a feasible method to fit out greenhouses with appropriate heating facilities, aiming at energy efficient and cost efficient production.展开更多
As the improvement of district heating systems,the fine-tuning of operational equipment has become a promising direction.However,in the practical district heating systems,relying solely on manual control and the exist...As the improvement of district heating systems,the fine-tuning of operational equipment has become a promising direction.However,in the practical district heating systems,relying solely on manual control and the existing basic models,the dynamic hydraulic-thermal process is hard to cover.Consequently,the primary side control in the current district heating system mainly results in the over or under-supply of heating substations.This article constructs a dynamic hydraulic-thermal model and performs a balanced operation strategies optimization based on the hydraulic-thermal model.The linearization and iterative optimization process are adopted to simplify the hydraulic and thermal modeling for the single pipe,and the hydraulic and thermal calculation are conducted sequentially.For the primary side network in the various operation conditions,the dynamic hydraulic-thermal model is established.The heating supply imbalance of the primary side return temperatures among different heating substations is defined and optimized based on the dynamic hydraulic-thermal model and the particle swarm optimization algorithm.In the case analysis,the results of heating supply imbalance before and after optimization are 0.81 K and 0.47 K,respectively,with a 42.0%reduction in heating imbalances after optimization.The proposed method could contribute to the fine-tuning of heating substations and the reduction of energy waste due to the imbalanced heating supply,which is significant for the operation strategies of district heating systems.展开更多
Editor-in-Chief Yuanming Lai,Academician of Chinese Academy of Sciences,director of Northwest Institute of Eco-Environment and Resources,Chinese Academy of Sciences,Lanzhou,China,Associate Editor of Cold Regions Scien...Editor-in-Chief Yuanming Lai,Academician of Chinese Academy of Sciences,director of Northwest Institute of Eco-Environment and Resources,Chinese Academy of Sciences,Lanzhou,China,Associate Editor of Cold Regions Science and Technology.Frozen ground accounts for 50%of the earthꞌs land area.With rapid economic development,more and more infrastructures are being constructed in the broad cold regions,resulting in disturbance to the heat balance of the cold environment.Meanwhile,climate warming impacts have been observed worldwide,with more severe effects occurring in the cold regions.展开更多
We theoretically and experimentally investigate thermal dynamics involved soliton microcomb generation in silicon oxynitride microresonators. Importantly, auxiliary laser heat balance scheme with flexible thermal mani...We theoretically and experimentally investigate thermal dynamics involved soliton microcomb generation in silicon oxynitride microresonators. Importantly, auxiliary laser heat balance scheme with flexible thermal manipulation is introduced to circumvent thermal instability and the intra-cavity temperature can be tuned from 60 ℃ to 41.5 ℃ via the commercial thermoelectric controller. As a result, various perfect soliton states with ultra-smooth spectral envelopes are observed on a well-designed and fabricated microresonator with homogeneous sidewall and thickness where spatial modes interaction and distortion are eliminated. The pre-reported spectral abrupt jumps due to mode hybridization are completely avoided and solitons tail oscillation vanishes simultaneously. This reported ideal coherent comb source without residual temporal and spectral noise will facilitate practical applications such as spectroscopy, ranging and astrocomb calibration.展开更多
This study concerns the heat transfer processes during ice accretion on wires. The steady state heat balance equation assumed to describe the thermodynamics at the surface of a current heated wire subjected to icing i...This study concerns the heat transfer processes during ice accretion on wires. The steady state heat balance equation assumed to describe the thermodynamics at the surface of a current heated wire subjected to icing is obtained by analyzing and computing each terms of heat flux. The surface temperature of wire is derived from the heat balance equation, which gives out a proposed estimation of the current intensity to prevent the wire icing展开更多
The possibility of underground imbalance between heat emission and absorption has a negative impact on the performance of ground-source heat pump systems （GSHPs）. Numerical and experimental researches were made in a...The possibility of underground imbalance between heat emission and absorption has a negative impact on the performance of ground-source heat pump systems （GSHPs）. Numerical and experimental researches were made in a residential building, which is supplied with a GSHP system and a ceiling radiation system combined with a replacement fresh air system. EnergyPlus simulations were used to estimate heating and cooling loads, and to assess the heat generated from the water pump, the fan and the heat pump unit. Then, Fluent simulations were used to compare three different control strategies of handling the underground heat exchange. These simulations were strongly based on an experimentally verified model. It is obtained that a ratio between cooling and heating loads is 5.08 ： 1 in a case study in Nanjing. Moreover, the control strategy based on the starting time is more efficient and reliable than the temperature and temperature difference strategies to control the underground heat exchange.展开更多
Energy balances are a general fundamental approach for analyzing the heat requirements for metallurgical processes.The formulation of heat balance equations was involved by computing the various components of heat goi...Energy balances are a general fundamental approach for analyzing the heat requirements for metallurgical processes.The formulation of heat balance equations was involved by computing the various components of heat going in and coming out of the oxygen steelmaking furnace.The developed model was validated against the calculations of Healy and McBride.The overall heat losses that have not been analyzed in previous studies were quantified by back-calculating heat loss from 35 industrial data provided by Tata Steel.The results from the model infer that the heat losses range from 1.3%to 5.9%of the total heat input and it can be controlled by optimizing the silicon in hot metal,the amount of scrap added and the postcombustion ratio.The model prediction shows that sensible heat available from the hot metal accounts for around 66%of total heat input and the rest from the exothermic oxidation reactions.Out of 34%of the heat from exothermic reactions,between 20%and 25%of heat is evolved from the oxidation of carbon to carbon monoxide and carbon dioxide.This model can be applied to predict the heat balance of any top blown oxygen steelmaking technology but needs further validation for a range of oxygen steelmaking operations and conditions.展开更多
A 2D full cell thermo-electric model of 160kA drained cell was set up using finiteelement code to calculate its freeze profile, then the drained cell model was modifiedaccording to the freeze profile computed and its ...A 2D full cell thermo-electric model of 160kA drained cell was set up using finiteelement code to calculate its freeze profile, then the drained cell model was modifiedaccording to the freeze profile computed and its heat balance was calculated. Comparedwith that of a 160kA conventional Hall-Heroult cell (H-H cell), though the melts vol-ume of the drained cell reduced greatly, the whole heat loss from it didn't drop downapparently, and an analysis was presented in the paper. On the other hand, the anode-cathode distance (ACD) of a drained cell was much less than that of a H-H cell, sothe voltage drop on it and heat produced decreased too, steps should be taken to keepa workable heat balance on a drained cell.展开更多
A promising solid-state coating mechanism based on the cold spray technique provides highly advantageous conditions on thermal-sensitive magnesium alloys.To study the effect of heat balance in cold spray coating on mi...A promising solid-state coating mechanism based on the cold spray technique provides highly advantageous conditions on thermal-sensitive magnesium alloys.To study the effect of heat balance in cold spray coating on microstructure,experiments were designed to successfully coat AA7075 on AZ31B with two different heat balance conditions to yield a coated sample with tensile residual stress and a sample with compressive residual stress in both coating and substrate.The effects of coating temperature on the microstructure of magnesium alloy and the interfaces of coated samples were then analyzed by SEM,EBSD,TEM in high-and low-heat input coating conditions.The interface of the AA7075 coating and magnesium alloy substrate under both conditions consists of a narrow-band layer with very fine grains,followed by columnar grains of magnesium that have grown perpendicular to the interface.At higher temperatures,this layer became wider.No intermetallic phase was detected at the interface under either condition.It is shown that the microstructure of the substrate was affected by coating temperature,leading to stress relief,dynamic recrystallization and even dynamic grain growth of magnesium under high temperature.Reducing the heat input and increasing the heat transfer decreased microstructural changes in the substrate.展开更多
The isothermal extrusion process of hollow aluminium profile was investigated using incremental proportional-integral-derivative(PID)control algorithm and finite element simulations.The range of extrusion speed was de...The isothermal extrusion process of hollow aluminium profile was investigated using incremental proportional-integral-derivative(PID)control algorithm and finite element simulations.The range of extrusion speed was determined by considering the maximum extrusion load and production efficiency.By taking the optimal solution temperature of the secondary phase as the target temperature,the extrusion speed–stroke curve for realizing the isothermal extrusion of the aluminium profile was obtained.Results show that in the traditional constant extrusion speed process,the average temperature of the cross-section of the aluminium profile at the die exit rapidly increases and then slowly rises with the increase in ram displacement.As the extrusion speed increases,the temperature difference at the die exit of the profile along the extrusion direction increases.The exit temperature difference between the front and back ends of the extrudate along the extrusion direction obtained by adopting isothermal extrusion is about 6.9℃.Furthermore,the heat generated by plastic deformation and friction during extrusion is balanced with the heat transfer from the workpiece to the container,porthole die and external environment.展开更多
Based on the state-of-the-art studies of solar-soil source heat pump compound system, operation patterns of solar-soil compound system were analyzed, particularly the advantages of parallel operation pattern. It is fo...Based on the state-of-the-art studies of solar-soil source heat pump compound system, operation patterns of solar-soil compound system were analyzed, particularly the advantages of parallel operation pattern. It is found that parallel operation pattern is better for solar-soil compound system. Furthermore, the heat balance issue of solar-soil compound system was emphatically analyzed from four aspects, which were annual analysis of heating and cooling load, the heat exchange of ground heat exchanger, capacity determination of solar-assisted heat sottrce and heat balance calculation of solar-soil compound system. Moreover, annual rate of heat balance in a solar-soil source heat pump compound system was calculated with a case study. It is shown that the annual heat unbalance ratio is 19%, which is less than 20%. As a result, the practical solar-soil compound system can basically maintain the heat balance of soil.展开更多
As the position of the transition zone changes obviously, that is, as the transition zone migrates to the north or the south from present position, it affects water or heat balance between the land and the atmosphere ...As the position of the transition zone changes obviously, that is, as the transition zone migrates to the north or the south from present position, it affects water or heat balance between the land and the atmosphere in a considerable degree and has a profound influence on climate in North China. The experiment results in this paper indicate whether in the dry case or in the wet case of the large-scale climatological background field, the surface air temperature in a wide range of the transition zone migration and its surrounding decreases as the transition zone migrates northward. Moreover, the net upward fluxes of the surface long wave radiation and the sensible heat decrease, and the evaporation to the atmosphere increases. As the transition zone migrates southward, the results are opposite. This kind of significant thermal forcing between the land and the atmosphere can excite secondary circulation or circulation cells, which interact with the large-scale circulation systems, changing the atmospheric motion, affecting the water vapor transportation and consequently having an effect on the precipitation.展开更多
Tamarix ramosissima Ledeb. is a typical hardy desert plant growing in arid regions of Northwest China. Sap flow in stems of Z ramosissima plants were measured continuously to determine the diurnal and seasonal variati...Tamarix ramosissima Ledeb. is a typical hardy desert plant growing in arid regions of Northwest China. Sap flow in stems of Z ramosissima plants were measured continuously to determine the diurnal and seasonal variations of sap flow and to understand the water requirements of this species and the response of sap flow to meteorological factors. This article compared the sap flow rate measured by the heat balance method with the transpiration rate measured by rapid weighing, and validated that heat balance sap flow gauges were reliable for monitoring transpiration. The influence of meteorological factors on stem sap flow during the growing season was： solar radiation 〉 vapor pressure deficit 〉 air temperature 〉 rela- tive humidity 〉 wind speed. Bidirectional sap flows occurred at night, and negative sap flow generally corresponded to high atmospheric humidity. The average error in predicted sap flow rate ranged from -0.78% to 14.00% from June to September and for transpiration the average error was 8.19%. Therefore, based on the functional equations between sap flow and meteorological factors as well as sapwood area, transpiration of an individual plant, and even the stand-level transpiration, can be estimated accurately through extrapolation.展开更多
Piloti is commonly used in tropical and subtropical climate zones to get high wind velocity and create shadowed areas in order to optimize the living environment of residential blocks,but there are few studies to reve...Piloti is commonly used in tropical and subtropical climate zones to get high wind velocity and create shadowed areas in order to optimize the living environment of residential blocks,but there are few studies to reveal the influence of piloti on the radiant environment of residential blocks systematically. Taking the city of Guangzhou as an example,using 3-D Unsteady State Heat Balance Radiation Calculation Method,this paper shows that the mean radiant temperature( MRT) under piloti area increases with the increase of piloti ratio,and especially when piloti ratio is equal to 100%,the MRT increase trend becomes sharp. The MRT of exposed area decreases with the increase of piloti ratio,especially when piloti ratio reaches 100%,the decrease trend of MRT becomes sharp,which offers the reference for the study on piloti design in subtropical climate zones and further research on living environment by CFD simulation in residential blocks.展开更多
The temperature of a solar cell subjected to the incident global solar radiation as a function of the local day time is determined. A heat balance equation is solved considering the heat losses due to convection and t...The temperature of a solar cell subjected to the incident global solar radiation as a function of the local day time is determined. A heat balance equation is solved considering the heat losses due to convection and thermal radiation. The cell efficiency is estimated as a measure of its performance. The results reveal that the temperature within the cell attains significant values. Nevertheless, the temperature dependence of its efficiency along the day time is not pronouncing. It slightly decreases with temperature.展开更多
Studies on the relationship between moisture behavior and gaseous VOCs （Volatile Organic Compounds） removal efficiency of packed tower biofilters are limited. In this research, the nutrient holding capacity, moist...Studies on the relationship between moisture behavior and gaseous VOCs （Volatile Organic Compounds） removal efficiency of packed tower biofilters are limited. In this research, the nutrient holding capacity, moisture evaporation rate and gaseous toluene and MEK （Methyl Ethyl Ketone） removal efficiencies of bioreactors with porous synthetic resin as the packing material were simultaneously observed. The nutrient holding capacity in one of the reactors was higher than those of the other two because its packing layer was frequently supplied with a nutrient solution by soaking. This reactor exhibited the highest toluene removal efficiency. However, excessive biomass growth was observed in this reactor. The reactor with a less frequent supply of nutrient solution by soaking showed a slightly lower toluene removal efficiency, possibly due to lack of nutrients in the packing layer. The reactor that was fed with the nutrient solution by spraying it onto the packing layer （a common method for supplying moisture） had the lowest toluene removal efficiency, mainly because of the uneven distribution of nutrients. Moreover, the moisture evaporation rate in the packing layer during moisture supply and heat balance were determined.展开更多
Starting with a recent unconventional explanation of the lift force on a wing, featuring compressibility of the air, an application of the same concept is made to the lift force on the equatorial sea surface due to th...Starting with a recent unconventional explanation of the lift force on a wing, featuring compressibility of the air, an application of the same concept is made to the lift force on the equatorial sea surface due to the Trade Winds, by greatly increasing the spatial scales. If the equatorial sea level does rise up, the northward slope to the sea level should facilitate the poleward flux of summer heat in both the North Pacific and North Atlantic Oceans, as two examples, in accordance with the heat budget requirements of these oceans. Compressed air dynamics consists of Bernoulli’s law applied to the streamlines of the Trade Winds, the force balance between the upward centrifugal force of the curved streamlines at the earth’s surface and a downward pressure force, and the perfect gas law for air.展开更多
In order to improve parts accuracy, a method of adding heat balance support （HBS） was proposed, and the detailed algorithm for generating HBS was developed. A number of experiments and a comparison between similar s...In order to improve parts accuracy, a method of adding heat balance support （HBS） was proposed, and the detailed algorithm for generating HBS was developed. A number of experiments and a comparison between similar softwares, showed that the algorithm is efficient and feasible. Moreover, different features of riBS were studied for different kinds of materials, such as PS and nylon. The research findings indicate that automatically adding HBS can significantly improve the accuracy of the parts, and that the algorithm for generating HBS is efficient and precise.展开更多
In this study, the e?ect of the lower boundary position selection for the Fourier equation on heat transfer and energy balance in soil is evaluated. A detailed numerical study shows that the proper position of the l...In this study, the e?ect of the lower boundary position selection for the Fourier equation on heat transfer and energy balance in soil is evaluated. A detailed numerical study shows that the proper position of the lower boundary is critical when solving the Fourier equation by using zero heat ?ux as the lower boundary condition. Since the position de?nes the capacity of soil as a heat sink or source, which absorbs and stores radiation energy from the sky in summer and then releases the energy to the atmosphere in winter, and regulates the deep soil temperature distribution, the depth of the position greatly in?uences the heat balance within the soil as well as the interaction between the soil and the atmosphere. Based on physical reasoning and the results of numerical simulation, the proper depth of the position should be equal to approximately 3 times of the annual heat wave damping depth. For most soils, the proper lower boundary depth for the Fourier equation should be around 8 m to 15 m, depending on soil texture.展开更多
基金supported by the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents and Science Research Innovative Group of Resources and Environment Engineering College of Shandong University of Science and Technology (No. 2012ZHTD06)the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents (No. 2013RCJJ049)+1 种基金the China Postdoctoral Science Foundation (No. 2013M541942)the Specialized Research Fund for the Doctoral Program of Higher Education (No. 20133718120013)
文摘Extraction of a coal seam which lies not far below a heating goafcan be a major safety challenge. A force auxiliary ventilation system was adopted as a control method in successful extraction and recovery of the panel 30110 of the #3-1 coal seam, which is about 30-40 rn below the heating goaf of the #2-2 seam at Longhua underground coal mine, Shanxi Province, China. Booster fans and ventilation control devices such as doors and regulators were used in the system. The results show that, provided that a force auxiliary ventilation system is properly designed to achieve a pressure balance between a panel and its overlying goat＇, the system can be used to extract a coal seam overlain by a heating goal. This paper describes the design, installation and performance of the ventilation system during the extraction and recovery phases of the oanel 30110.
基金a grant from the Major Programs of the Ministry of Science and Technology during the 10th Five-Year Plan Period from (2001BA04A)
文摘Internal temperature is crucial to plant growth in the greenhouse. We investigated the patterns of constructing and managing greenhouses in Chongqing, and developed an algorithm of heating temperature for closed winter plastic greenhouses under the conditions of no man-made illumination, no ventilation and hot wind machine as the heating equipment, which are the most adopted pattern of greenhouses in Chongqing area. The algorithm includes two functions of temperature outside the greenhouse, which calculate the values of the warming estimation coefficient (WEC) and the gap between temperatures inside and outside the greenhouse with the measured data of outside temperature, and then give the value of internal temperature; the heat rating of heating facilities required by a greenhouse can be determined by this algorithm with given values of floor area and internal temperature, measured outside temperature and calculated WEC. Verification of the algorithm demonstrates a desirable accuracy of estimation. Algorithms of computing heating temperature for greenhouses of different constructing and managing patterns and in different geographic conditions can also be derived in a similar way. This research presents a paradigm for developing a feasible method to fit out greenhouses with appropriate heating facilities, aiming at energy efficient and cost efficient production.
基金supported by National Natural Science Foundation of China(Grant No.51806190)supported by National Key R&D Program of China(Grant No.2023YFE0108600).
文摘As the improvement of district heating systems,the fine-tuning of operational equipment has become a promising direction.However,in the practical district heating systems,relying solely on manual control and the existing basic models,the dynamic hydraulic-thermal process is hard to cover.Consequently,the primary side control in the current district heating system mainly results in the over or under-supply of heating substations.This article constructs a dynamic hydraulic-thermal model and performs a balanced operation strategies optimization based on the hydraulic-thermal model.The linearization and iterative optimization process are adopted to simplify the hydraulic and thermal modeling for the single pipe,and the hydraulic and thermal calculation are conducted sequentially.For the primary side network in the various operation conditions,the dynamic hydraulic-thermal model is established.The heating supply imbalance of the primary side return temperatures among different heating substations is defined and optimized based on the dynamic hydraulic-thermal model and the particle swarm optimization algorithm.In the case analysis,the results of heating supply imbalance before and after optimization are 0.81 K and 0.47 K,respectively,with a 42.0%reduction in heating imbalances after optimization.The proposed method could contribute to the fine-tuning of heating substations and the reduction of energy waste due to the imbalanced heating supply,which is significant for the operation strategies of district heating systems.
文摘Editor-in-Chief Yuanming Lai,Academician of Chinese Academy of Sciences,director of Northwest Institute of Eco-Environment and Resources,Chinese Academy of Sciences,Lanzhou,China,Associate Editor of Cold Regions Science and Technology.Frozen ground accounts for 50%of the earthꞌs land area.With rapid economic development,more and more infrastructures are being constructed in the broad cold regions,resulting in disturbance to the heat balance of the cold environment.Meanwhile,climate warming impacts have been observed worldwide,with more severe effects occurring in the cold regions.
基金supported by the National Natural Science Foundation of China(NSFC)(No.12204381,62205370)the fund of Natural Science Fundamental Research Program of Shaanxi Province(2023-JC-QN-0645)+1 种基金Startup Funding from Shanghai Institute of Optics and Fine Mechanics,Chinese Academy of Science(24JR521001)Shanghai Magnolia Talent Plan Pujiang Project(24PJD125).
文摘We theoretically and experimentally investigate thermal dynamics involved soliton microcomb generation in silicon oxynitride microresonators. Importantly, auxiliary laser heat balance scheme with flexible thermal manipulation is introduced to circumvent thermal instability and the intra-cavity temperature can be tuned from 60 ℃ to 41.5 ℃ via the commercial thermoelectric controller. As a result, various perfect soliton states with ultra-smooth spectral envelopes are observed on a well-designed and fabricated microresonator with homogeneous sidewall and thickness where spatial modes interaction and distortion are eliminated. The pre-reported spectral abrupt jumps due to mode hybridization are completely avoided and solitons tail oscillation vanishes simultaneously. This reported ideal coherent comb source without residual temporal and spectral noise will facilitate practical applications such as spectroscopy, ranging and astrocomb calibration.
文摘This study concerns the heat transfer processes during ice accretion on wires. The steady state heat balance equation assumed to describe the thermodynamics at the surface of a current heated wire subjected to icing is obtained by analyzing and computing each terms of heat flux. The surface temperature of wire is derived from the heat balance equation, which gives out a proposed estimation of the current intensity to prevent the wire icing
文摘The possibility of underground imbalance between heat emission and absorption has a negative impact on the performance of ground-source heat pump systems （GSHPs）. Numerical and experimental researches were made in a residential building, which is supplied with a GSHP system and a ceiling radiation system combined with a replacement fresh air system. EnergyPlus simulations were used to estimate heating and cooling loads, and to assess the heat generated from the water pump, the fan and the heat pump unit. Then, Fluent simulations were used to compare three different control strategies of handling the underground heat exchange. These simulations were strongly based on an experimentally verified model. It is obtained that a ratio between cooling and heating loads is 5.08 ： 1 in a case study in Nanjing. Moreover, the control strategy based on the starting time is more efficient and reliable than the temperature and temperature difference strategies to control the underground heat exchange.
文摘Energy balances are a general fundamental approach for analyzing the heat requirements for metallurgical processes.The formulation of heat balance equations was involved by computing the various components of heat going in and coming out of the oxygen steelmaking furnace.The developed model was validated against the calculations of Healy and McBride.The overall heat losses that have not been analyzed in previous studies were quantified by back-calculating heat loss from 35 industrial data provided by Tata Steel.The results from the model infer that the heat losses range from 1.3%to 5.9%of the total heat input and it can be controlled by optimizing the silicon in hot metal,the amount of scrap added and the postcombustion ratio.The model prediction shows that sensible heat available from the hot metal accounts for around 66%of total heat input and the rest from the exothermic oxidation reactions.Out of 34%of the heat from exothermic reactions,between 20%and 25%of heat is evolved from the oxidation of carbon to carbon monoxide and carbon dioxide.This model can be applied to predict the heat balance of any top blown oxygen steelmaking technology but needs further validation for a range of oxygen steelmaking operations and conditions.
基金supported by the National Key Fundamental Research&Development Project of China(No.G1999064903).
文摘A 2D full cell thermo-electric model of 160kA drained cell was set up using finiteelement code to calculate its freeze profile, then the drained cell model was modifiedaccording to the freeze profile computed and its heat balance was calculated. Comparedwith that of a 160kA conventional Hall-Heroult cell (H-H cell), though the melts vol-ume of the drained cell reduced greatly, the whole heat loss from it didn't drop downapparently, and an analysis was presented in the paper. On the other hand, the anode-cathode distance (ACD) of a drained cell was much less than that of a H-H cell, sothe voltage drop on it and heat produced decreased too, steps should be taken to keepa workable heat balance on a drained cell.
基金The financial support of the Natural Sciences and Engineering Research Council of Canada(NSERC)through the Automotive Partnership Canada(APC)under APCPJ 459269-13 grant with contributions from Multimatic Technical centre,Ford Motor CompanyCenterline Windsor are acknowledged.Funds from NSERC-RTI program under EQPEQ458441-2014 grant also supported this research.
文摘A promising solid-state coating mechanism based on the cold spray technique provides highly advantageous conditions on thermal-sensitive magnesium alloys.To study the effect of heat balance in cold spray coating on microstructure,experiments were designed to successfully coat AA7075 on AZ31B with two different heat balance conditions to yield a coated sample with tensile residual stress and a sample with compressive residual stress in both coating and substrate.The effects of coating temperature on the microstructure of magnesium alloy and the interfaces of coated samples were then analyzed by SEM,EBSD,TEM in high-and low-heat input coating conditions.The interface of the AA7075 coating and magnesium alloy substrate under both conditions consists of a narrow-band layer with very fine grains,followed by columnar grains of magnesium that have grown perpendicular to the interface.At higher temperatures,this layer became wider.No intermetallic phase was detected at the interface under either condition.It is shown that the microstructure of the substrate was affected by coating temperature,leading to stress relief,dynamic recrystallization and even dynamic grain growth of magnesium under high temperature.Reducing the heat input and increasing the heat transfer decreased microstructural changes in the substrate.
基金the financial supports from the National Natural Science Foundation of China(No.52005244)the Scientific Research Fund of Hunan Provincial Education Department,China(Nos.18B285,18B552)+1 种基金the Natural Science Foundation of Hunan Provincial,China(Nos.2019JJ50510,2019JJ70077)Young Scholars Program of Furong Scholar Program,China.
文摘The isothermal extrusion process of hollow aluminium profile was investigated using incremental proportional-integral-derivative(PID)control algorithm and finite element simulations.The range of extrusion speed was determined by considering the maximum extrusion load and production efficiency.By taking the optimal solution temperature of the secondary phase as the target temperature,the extrusion speed–stroke curve for realizing the isothermal extrusion of the aluminium profile was obtained.Results show that in the traditional constant extrusion speed process,the average temperature of the cross-section of the aluminium profile at the die exit rapidly increases and then slowly rises with the increase in ram displacement.As the extrusion speed increases,the temperature difference at the die exit of the profile along the extrusion direction increases.The exit temperature difference between the front and back ends of the extrudate along the extrusion direction obtained by adopting isothermal extrusion is about 6.9℃.Furthermore,the heat generated by plastic deformation and friction during extrusion is balanced with the heat transfer from the workpiece to the container,porthole die and external environment.
基金Project(50838009) supported by the National Natural Science Foundation of ChinaProject(2010DFA72740-05) supported by the International Science & Technology Cooperation Program of China
文摘Based on the state-of-the-art studies of solar-soil source heat pump compound system, operation patterns of solar-soil compound system were analyzed, particularly the advantages of parallel operation pattern. It is found that parallel operation pattern is better for solar-soil compound system. Furthermore, the heat balance issue of solar-soil compound system was emphatically analyzed from four aspects, which were annual analysis of heating and cooling load, the heat exchange of ground heat exchanger, capacity determination of solar-assisted heat sottrce and heat balance calculation of solar-soil compound system. Moreover, annual rate of heat balance in a solar-soil source heat pump compound system was calculated with a case study. It is shown that the annual heat unbalance ratio is 19%, which is less than 20%. As a result, the practical solar-soil compound system can basically maintain the heat balance of soil.
文摘As the position of the transition zone changes obviously, that is, as the transition zone migrates to the north or the south from present position, it affects water or heat balance between the land and the atmosphere in a considerable degree and has a profound influence on climate in North China. The experiment results in this paper indicate whether in the dry case or in the wet case of the large-scale climatological background field, the surface air temperature in a wide range of the transition zone migration and its surrounding decreases as the transition zone migrates northward. Moreover, the net upward fluxes of the surface long wave radiation and the sensible heat decrease, and the evaporation to the atmosphere increases. As the transition zone migrates southward, the results are opposite. This kind of significant thermal forcing between the land and the atmosphere can excite secondary circulation or circulation cells, which interact with the large-scale circulation systems, changing the atmospheric motion, affecting the water vapor transportation and consequently having an effect on the precipitation.
基金financially supported by the National Natural Science Foundation of China (No. 91125025)
文摘Tamarix ramosissima Ledeb. is a typical hardy desert plant growing in arid regions of Northwest China. Sap flow in stems of Z ramosissima plants were measured continuously to determine the diurnal and seasonal variations of sap flow and to understand the water requirements of this species and the response of sap flow to meteorological factors. This article compared the sap flow rate measured by the heat balance method with the transpiration rate measured by rapid weighing, and validated that heat balance sap flow gauges were reliable for monitoring transpiration. The influence of meteorological factors on stem sap flow during the growing season was： solar radiation 〉 vapor pressure deficit 〉 air temperature 〉 rela- tive humidity 〉 wind speed. Bidirectional sap flows occurred at night, and negative sap flow generally corresponded to high atmospheric humidity. The average error in predicted sap flow rate ranged from -0.78% to 14.00% from June to September and for transpiration the average error was 8.19%. Therefore, based on the functional equations between sap flow and meteorological factors as well as sapwood area, transpiration of an individual plant, and even the stand-level transpiration, can be estimated accurately through extrapolation.
基金Sponsored by the Strategic Japanese-Chinese Cooperation Program (Grant No.2011DFA91210)the Fundamental Research Funds for the Central Universities (Grant No.HIT.NSRIF.2014075),the Fundamental Research Funds for the Central Universities (Grant No.HIT.KISTP.201419)the Natural Science Foundation of Heilongjiang Province (Grant No.E201316)
文摘Piloti is commonly used in tropical and subtropical climate zones to get high wind velocity and create shadowed areas in order to optimize the living environment of residential blocks,but there are few studies to reveal the influence of piloti on the radiant environment of residential blocks systematically. Taking the city of Guangzhou as an example,using 3-D Unsteady State Heat Balance Radiation Calculation Method,this paper shows that the mean radiant temperature( MRT) under piloti area increases with the increase of piloti ratio,and especially when piloti ratio is equal to 100%,the MRT increase trend becomes sharp. The MRT of exposed area decreases with the increase of piloti ratio,especially when piloti ratio reaches 100%,the decrease trend of MRT becomes sharp,which offers the reference for the study on piloti design in subtropical climate zones and further research on living environment by CFD simulation in residential blocks.
文摘The temperature of a solar cell subjected to the incident global solar radiation as a function of the local day time is determined. A heat balance equation is solved considering the heat losses due to convection and thermal radiation. The cell efficiency is estimated as a measure of its performance. The results reveal that the temperature within the cell attains significant values. Nevertheless, the temperature dependence of its efficiency along the day time is not pronouncing. It slightly decreases with temperature.
文摘Studies on the relationship between moisture behavior and gaseous VOCs （Volatile Organic Compounds） removal efficiency of packed tower biofilters are limited. In this research, the nutrient holding capacity, moisture evaporation rate and gaseous toluene and MEK （Methyl Ethyl Ketone） removal efficiencies of bioreactors with porous synthetic resin as the packing material were simultaneously observed. The nutrient holding capacity in one of the reactors was higher than those of the other two because its packing layer was frequently supplied with a nutrient solution by soaking. This reactor exhibited the highest toluene removal efficiency. However, excessive biomass growth was observed in this reactor. The reactor with a less frequent supply of nutrient solution by soaking showed a slightly lower toluene removal efficiency, possibly due to lack of nutrients in the packing layer. The reactor that was fed with the nutrient solution by spraying it onto the packing layer （a common method for supplying moisture） had the lowest toluene removal efficiency, mainly because of the uneven distribution of nutrients. Moreover, the moisture evaporation rate in the packing layer during moisture supply and heat balance were determined.
文摘Starting with a recent unconventional explanation of the lift force on a wing, featuring compressibility of the air, an application of the same concept is made to the lift force on the equatorial sea surface due to the Trade Winds, by greatly increasing the spatial scales. If the equatorial sea level does rise up, the northward slope to the sea level should facilitate the poleward flux of summer heat in both the North Pacific and North Atlantic Oceans, as two examples, in accordance with the heat budget requirements of these oceans. Compressed air dynamics consists of Bernoulli’s law applied to the streamlines of the Trade Winds, the force balance between the upward centrifugal force of the curved streamlines at the earth’s surface and a downward pressure force, and the perfect gas law for air.
基金supported by the Innovatory Group Program of the Natural Science Foundation of Hubei Province (No. 2004ABC001)the Open Foundation of State Key Laboratory of Powder Metallurgy of Center South University (No. 200506123102A), China
文摘In order to improve parts accuracy, a method of adding heat balance support （HBS） was proposed, and the detailed algorithm for generating HBS was developed. A number of experiments and a comparison between similar softwares, showed that the algorithm is efficient and feasible. Moreover, different features of riBS were studied for different kinds of materials, such as PS and nylon. The research findings indicate that automatically adding HBS can significantly improve the accuracy of the parts, and that the algorithm for generating HBS is efficient and precise.
基金National Natural Science Founda-tion of China under Grant Nos.40233034 , 40075019KZCX2-SW-210National Natural Science Foun-dation of China under Grant No.40305011.
文摘In this study, the e?ect of the lower boundary position selection for the Fourier equation on heat transfer and energy balance in soil is evaluated. A detailed numerical study shows that the proper position of the lower boundary is critical when solving the Fourier equation by using zero heat ?ux as the lower boundary condition. Since the position de?nes the capacity of soil as a heat sink or source, which absorbs and stores radiation energy from the sky in summer and then releases the energy to the atmosphere in winter, and regulates the deep soil temperature distribution, the depth of the position greatly in?uences the heat balance within the soil as well as the interaction between the soil and the atmosphere. Based on physical reasoning and the results of numerical simulation, the proper depth of the position should be equal to approximately 3 times of the annual heat wave damping depth. For most soils, the proper lower boundary depth for the Fourier equation should be around 8 m to 15 m, depending on soil texture.
