We present a coaxial detection of the backscattered electrons in SEM. The lens-aperture has been used to filter in energy and focus the backscattered electrons. This particular geometry allows us to eliminate the low ...We present a coaxial detection of the backscattered electrons in SEM. The lens-aperture has been used to filter in energy and focus the backscattered electrons. This particular geometry allows us to eliminate the low energy backscattered electrons and collect the backscattered electrons, which are backscattered close to the incident beam orientation. The main advantage of this geometry is adapted to topographic contrast attenuation and atomic number contrast enhancement. Thus this new SEM is very suitable to analyze the material composition.展开更多
The full energy distribution of backscattered electrons from the elastic peak do wn to the true-secondary electron peak for heavy metals, Ta, W, Pt and Au, in Au ger electron spectroscopy in the EN(E) mode has been st...The full energy distribution of backscattered electrons from the elastic peak do wn to the true-secondary electron peak for heavy metals, Ta, W, Pt and Au, in Au ger electron spectroscopy in the EN(E) mode has been studied with a Monte Carlo simulation method, which includes cascade-secondary-electron production. The sim ulation model is based on the use of a dielectric function for describing inelas tic scattering and secondary excitation, and on the use of Mott cross sections f or elastic scattering. A systematic comparison between the calculated and experi mental spectra measured with a cylindrical mirror analyzer has been made for pri mary energies ranging from 1 to 5keV. Excellent agreement was obtained for these heavy metals on the backscattering background at primary energies in the keV re gion. A significant contribution of cascade secondary electrons to the measured spectra on the low-energy side was found.展开更多
A new parallel Monte Carlo simulation method of secondary electron (SE) and back scattered electron images (BSE) of scanning electron microscopy (SEM) for a com plex geometric structure has been developed. This paper ...A new parallel Monte Carlo simulation method of secondary electron (SE) and back scattered electron images (BSE) of scanning electron microscopy (SEM) for a com plex geometric structure has been developed. This paper describes briefly the si mulation method and the modification to the conventional sampling method for the step length. Example simulation results have been obtained for several artifici al structures.展开更多
By using the Monte Carlo method, we simulated the trajectories of coaxial backscattering electrons corresponding to a new type of scanning electron microscope. From the calculated results, we obtain a universal expres...By using the Monte Carlo method, we simulated the trajectories of coaxial backscattering electrons corresponding to a new type of scanning electron microscope. From the calculated results, we obtain a universal expression, which describes with good accuracy the backscattering coefficient versus film thickness under all conditions used. By measuring the coaxial backscattering coefficient and using this universal formula, the thickness of thin films can be determined if the composition is known.展开更多
In this paper, the orange peel defect in the surface range of the st14 steel sheet has been investigated using the electron backscattered diffraction (EBSD) technique. It has been found that the orange peel defect in ...In this paper, the orange peel defect in the surface range of the st14 steel sheet has been investigated using the electron backscattered diffraction (EBSD) technique. It has been found that the orange peel defect in the st14 steel sheet was resulted from the local coarse grains which were produced during hot-rolling due to the critical deformation in dual-phase zone. During deep drawing, the coarse grains with {100}<001> microtexture can slip on the {112}<111> slip system to form bulging and yields orange peel defects, while the coarse grains with {112}<110> orientation do not form the defect as the Schmid factor of {112}<111> slip system in it equals zero.展开更多
Prticle-in-cell（PIC） simulations demonstrated that,when the relativistic magnetron with diffraction output（MDO） is applied with a 410 kV voltage pulse,or when the relativistic magnetron with radial output is appli...Prticle-in-cell（PIC） simulations demonstrated that,when the relativistic magnetron with diffraction output（MDO） is applied with a 410 kV voltage pulse,or when the relativistic magnetron with radial output is applied with a 350 kV voltage pulse,electrons emitted from the cathode with high energy will strike the anode block wall.The emitted secondary electrons and backscattered electrons affect the interaction between electrons and RF fields induced by the operating modes,which decreases the output power in the radial output relativistic magnetron by about 15%（10%for the axial output relativistic magnetron）,decreases the anode current by about 5%（5%for the axial output relativistic magnetron）,and leads to a decrease of electronic efficiency by 8%（6%for the axial output relativistic magnetron）.The peak value of the current formed by secondary and backscattered current equals nearly half of the amplitude of the anode current,which may help the growth of parasitic modes when the applied magnetic field is near the critical magnetic field separating neighboring modes.Thus,mode competition becomes more serious.展开更多
In this study, novel reconstruction methods, including grain graph and variant graph, were established to reconstruct parent austenite on the basis of electron backscatter diffraction (EBSD) data. The evaluation indic...In this study, novel reconstruction methods, including grain graph and variant graph, were established to reconstruct parent austenite on the basis of electron backscatter diffraction (EBSD) data. The evaluation indicators included boundary identification and variant distribution. Moreover, an innovative variant pair analysis method was proposed. The results indicated that the Kurdjumov-Sachs orientation relationship was the most appropriate because it had the smallest refinement error and deviation. In addition, the variant graph reconstruction was more effective in reducing mis-indexing areas than the grain graph, exhibiting a robust capacity to accurately identify austenite grain boundaries. Additionally, the variant graph reconstruction induced the transformation of variants, variant pairs, close-packed plane (CP) groups, and Bain groups. Moreover, various reconstructed datasets (calc-grain data and EBSD data) affected the distribution of variants. The austenite grains reconstructed from the calc-grain data featured two or more variants clustered within the same region due to the preprocessing (calculating, filtering, and smoothing) of the EBSD data. These variations did not impede the microstructural analysis when consistent original data and reconstruction methods were used. The reconstruction of parent austenite grains holds promise for providing a fresh perspective and a deeper understanding of strengthening and toughening mechanisms in the future.展开更多
The microstructure development of 55VNb1 microalloyed steel after warm deformation via multi-pass biaxial compression tests was studied,and the effect of thermomechanical conditions on spheroidisation of cementite lam...The microstructure development of 55VNb1 microalloyed steel after warm deformation via multi-pass biaxial compression tests was studied,and the effect of thermomechanical conditions on spheroidisation of cementite lamellae and ferrite recrystallisation for a range of deformation temperatures(600–700℃),cooling/soaking time(water quenching,air cooling,10 and 30 min of soaking time)and interpass time(0–10 s)was analysed.During deformation,the spheroidisation of pearlite is dynamically accelerated mainly by boundary splitting mechanism together with the rapid dissolution of cementite,while ferrite softening is attributed to dynamic recovery and continuous dynamic recrystallisation.The strong microstructural evolution during cooling/soaking time indicates that deformation energy accumulated is sufficient to activate metallurgical phenomena in both phases also statically.Static spheroidisation is a diffusive process,with rate controlled by the diffusion of vacancies,as suggested by the estimated activation energy.Ferrite refinement is the result of the evolution of continuous recrystallisation and pinning effect exerted by fine,globulised and homogeneously dispersed cementite particles.Increasing temperature causes accelerated kinetics in metallurgical phenomena;therefore,cooling/soaking time becomes key parameters to achieve ultrafine grained and spheroidised microstructures.Interpass time favours spheroidisation and promotes continuous recrystallisation;however,it must be carefully controlled to find a balance between recrystallisation and Ostwald ripening to optimise microstructural development.展开更多
The rapidly increasing scientific interest in 3D-printed high-entropy alloys(HEAs)necessitates the understanding of their deformation mechanisms.Here,we present the grain rotation behavior of a nearly equiatomic CrMnF...The rapidly increasing scientific interest in 3D-printed high-entropy alloys(HEAs)necessitates the understanding of their deformation mechanisms.Here,we present the grain rotation behavior of a nearly equiatomic CrMnFeCoNi HEA fabricated with laser-beam powder bed fusion via quasi in-situ electron backscatter diffraction(EBSD)observations during compressive deformation.The rotation paths of grains can be predicted via a new lattice reorientation factor(m_(A)),defined as the average of primary and secondary slip Schmid factors.The grains that initially have their〈111〉directions oriented close to the loading direction with low-to-intermediate m_(A)values tend to rotate towards the〈101〉pole.The grains initially oriented in the center of inverse pole figures with high m_(A)values develop multiple rotation paths pointing away from the〈001〉pole.The cube-oriented grains with their〈001〉directions close to the loading direction undergo face-centered cubic(FCC)-to-hexagonal close-packed(HCP)phase transformation due to the activation of octahedral slip involving multiple slip systems.This transformation can be well elucidated via a modified parameter,defined as the average of four maximum Schmid factors on each of four{111}slip/twinning planes in FCC crystals.The findings provide new insights into the underlying mechanisms for deformation-induced grain rotation and phase transformation,and help pave the way for developing advanced HEAs via transformation-induced plasticity.展开更多
The preferred microstructure and formation of variants during martensitic transformation of titanium alloys are very important for understanding and optimizing the mechanical properties of alloys.However,the main cont...The preferred microstructure and formation of variants during martensitic transformation of titanium alloys are very important for understanding and optimizing the mechanical properties of alloys.However,the main contribution of variant selection in the past two decades mainly focused on the issues associated with the interfaces,and a comprehensive explanation at the micro atomic level is still lacking.In the current work,EBSD,TEM,and SEM were used to analyze the essence of variant selection in combination with the valence electron theory of alloys(VE-theory)and cellular automata(CA)modeling.The results show that the driving force and atom path can be demonstrated for the collective shear and rotation displacements of atoms in martensitic transition;the martensitic variant selection in Ti6Al4V alloy has greater randomness in three aspects,namely area ratio of martensitic variants,two variants formed by the same crystal plane of parent phaseβ,and the variant distribution ratios of five typical grain boundaries.The preferred selection ofα'variant is mainly affected by atom interaction and element distribution,especially Al and V elements.The dislocation pile-up and the softβphase in martensitic variants are two of the main factors to affect the hardness variation of lath martensite and acicular martensite.展开更多
Employing experimental equipment and techniques,such as electron backscatter diffraction,transmission Kikuchi diffraction,and transmission electron microscopy,the microstructure,phase structure,and orientation relatio...Employing experimental equipment and techniques,such as electron backscatter diffraction,transmission Kikuchi diffraction,and transmission electron microscopy,the microstructure,phase structure,and orientation relationships of 0.6μm electroplated nickel(Ni)steel following annealing at 580-650℃for 15-30 hours were investigated.A comprehensive analysis was conducted to gain insights into the complex changes in the material's properties due to the annealing process.The results reveal that prolonged annealing led to considerable long-range diffusion of surface Ni atoms into the substrate of the 0.6μm Ni-plated steel.This diffusion process resulted in the formation of an alloy diffusion layer,approximately 4μm in thickness,which altered the material's microstructural characteristics.The extent of diffusion and its effect on the microstructure and structure were meticulously quantified.At the annealing temperature,the diffused Ni in the substrate,acting as an austenite-stabilizing element,expanded the austenite phase region.The alloy layer at this temperature predominantly consisted of the face-centered cubic(FCC)-structuredγ(Fe,Ni)solid solution.Upon cooling to room temperature,the alloy diffusion layer evolved into a dual-layer composite structure.The upper layer mainly comprised the FCC-structuredγ(Fe,Ni)solid solution,interspersed with a minor FCC compound superstructure phase.The lower layer underwent a diffusionless phase transformation during cooling,which led to the formation of the body-centered tetragonal/body-centered cubic-structured martensite.This phase,which is known for its high hardness and numerous variants,maintained the classic Kurdjumov-Sachs orientation relationship with the upper FCC parent phase,and it satisfied the close-packed plane{111}γ//{110}α′and close-packed direction<110>γ//<111>α′.A detailed analysis of the different phases within the alloy layer and their phase transitions was presented,offering an in-depth understanding of the material's characteristics.展开更多
This study examines the effects of friction stir welding(FSW)and post-weld heat treatment(PWHT)on the grain boundary character distribution and corrosion resistance of cross sectional(top and bottom)regions of nickel-...This study examines the effects of friction stir welding(FSW)and post-weld heat treatment(PWHT)on the grain boundary character distribution and corrosion resistance of cross sectional(top and bottom)regions of nickel-and molybdenum-free high-nitrogen austenitic stainless steel(HNASS).FSW at 400 rpm and 30 mm/min resulted in finer grains(4.18μm)and higher coincident site lattice(CSL)boundaries(32.3%)at the top of the stir zone(SZ)due to dynamic recrystallization(DRX).PWHT at 900℃for 1 h led to grain coarsening(12.91μm the bottom SZ)but enhanced CSL boundaries from 24.6%to 30.2%,improving grain boundary stability.PWHT reduced the kernel average misorientation(KAM)by 14.9%in the SZ-top layer and 20.4%in the SZ-bottom layer,accompanied by a 25%decrease in hardness in the SZ-top layer and 26.7%in the SZ-bottom layer,indicating strain recovery and reduced dislocation density.Potentiodynamic polarization tests(PDP)showed a 18%increase in pitting potential and a 76%reduction in corrosion rate after PWHT.The improvement in corrosion resistance is attributed to the increase inΣ3 twin boundaries,which enhance grain boundary stability and reduce susceptibility to localized corrosion.These findings highlight the role of PWHT in refining the microstructure and strengthening corrosion resistance,making HNASS a promising material for demanding applications.展开更多
In this study,the twinning-detwinning behavior and slip behavior of rolled AZ31 magnesium-alloy plates during a three-step intermittent dynamic compression process along the rolling direction(RD)and normal direction(N...In this study,the twinning-detwinning behavior and slip behavior of rolled AZ31 magnesium-alloy plates during a three-step intermittent dynamic compression process along the rolling direction(RD)and normal direction(ND),are investigated via quasi-in situ electron backscatter diffraction,and the causes of the twinning and detwinning behavior are explained according to Schmid law,local strain coordination,and slip trajectories.It is found that the twins are first nucleated and grow at a compressive strain of 3%along the RD.In addition to the Schmid factor(SF),the strain coordination factor(m’)also influences the selection of the twin variants during the twinning process,resulting in the nucleation of twins with a low SF.During the second and third steps of the application of continuous compressive strains with magnitudes and directions of 3%RD+3%ND and 3%RD+3%ND+2.5%ND,detwinning occurs to different extents.The observation of the detwinning behavior reveals that the order in which multiple twins within the same grain undergo complete detwinning is related to Schmid law and the strain concentration,with a low SF and a high strain concentration promoting complete detwinning.The interaction between slip dislocations and twin boundaries in the deformed grains as well as the pinning of dislocations at the tips of the {1012} tensile twins with a special structure result in incomplete detwinning.Understanding the microstructural evolution and twinning behavior of magnesium alloys under different deformation geometries is important for the development of high-strength and high-toughness magnesium alloys.展开更多
Nanoindentation and high resolution electron backscatter diffraction（EBSD） were combined to examine the elastic modulus and hardness of α and β phases,anisotropy in residual elastic stress strain fields and distri...Nanoindentation and high resolution electron backscatter diffraction（EBSD） were combined to examine the elastic modulus and hardness of α and β phases,anisotropy in residual elastic stress strain fields and distributions of geometrically necessary dislocation（GND） density around the indentations within TA15 titanium alloy.The nano-indention tests were conducted on α and β phases,respectively.The residual stress strain fields surrounding the indentation were calculated through crosscorrelation method from recorded patterns.The GND density distribution around the indentation was calculated based on the strain gradient theories to reveal the micro-mechanism of plastic deformation.The results indicate that the elastic modulus and hardness for α p hase are 129.05 GPas and 6.44 GPa,while for β phase,their values are 109.80 GPa and 4.29 GPa,respectively.The residual Mises stress distribution around the indentation is relatively heterogeneous and significantly influenced by neighboring soft β phase.The region with low residual stress around the indentation is accompanied with markedly high a type and prismatic-GND density.展开更多
Grain refinement of AZ31 Mg alloy during cyclic extrusion compression （CEC） at 225-400 ℃ was investigated quantitatively by electron backscattering diffraction （EBSD）. Results show that an ultrafine grained micro...Grain refinement of AZ31 Mg alloy during cyclic extrusion compression （CEC） at 225-400 ℃ was investigated quantitatively by electron backscattering diffraction （EBSD）. Results show that an ultrafine grained microstructure of AZ31 alloy is obtained only after 3 passes of CEC at 225 ℃. The mean misorientation and the fraction of high angle grain boundaries （HAGBs） increase gradually by lowering extrusion temperature. Only a small fraction of {101^-2} twinning is observed by EBSD in AZ31 Mg alloys after 3 passes of CEC. Schmid factors calculation shows that the most active slip system is pyramidal slip {101^-1}〈1120〉and basal slip {0001}〈1120〉 at 225-350 ℃ and 400 ℃, respectively. Direct evidences at subgrain boundaries support the occurrence of continuous dynamic recrystallization （CDRX） mechanism in grain refinement of AZ31 Mg alloy processed by CEC.展开更多
With the help of FESEM, high resolution electron backscatter diffraction can investigate the grains/subgrains as small as a few tens of nanometers with a good angular resolution （~0.5°）. Fast development of EBS...With the help of FESEM, high resolution electron backscatter diffraction can investigate the grains/subgrains as small as a few tens of nanometers with a good angular resolution （~0.5°）. Fast development of EBSD speed （up to 1100 patterns per second） contributes that the number of published articles related to EBSD has been increasing sharply year by year. This paper reviews the sample preparation, parameters optimization and analysis of EBSD technique, emphasizing on the investigation of ultrafine grained and nanostructured materials processed by severe plastic deformation （SPD）. Detailed and practical parameters of the electropolishing, silica polishing and ion milling have been summarized. It is shown that ion milling is a real universal and promising polishing method for EBSD preparation of almost all materials. There exists a maximum value of indexed points as a function of step size. The optimum step size depends on the magnification and the board resolution/electronic step size. Grains/subgrains and texture, and grain boundary structure are readily obtained by EBSD. Strain and stored energy may be analyzed by EBSD.展开更多
The relation between the Mg treatment and ferrite grain boundaries misorientation was investigated. The orientation imaging microscopy technique based on electron backscattered diffraction technique （EBSD） was used ...The relation between the Mg treatment and ferrite grain boundaries misorientation was investigated. The orientation imaging microscopy technique based on electron backscattered diffraction technique （EBSD） was used in this work. （t was found that the addition of 0.005 wt% Mg to the steel could evidently increase the ratio of acicular ferrite crystals appearing at large angles boundaries to each other, which was attributed to the nucleation of the second-phase particles by the Mg treatment. The FBSD techniques provide a power- ful method to characterize and quantify the ferrite grain boundaries misorientation, in order to relate it to toughness.展开更多
Mechanical properties and texture evolutions of the as-rolled AZ31 Mg sheets were investigated.The results show that the grains of the sheets are significantly refined after hot rolling.The mechanical properties of th...Mechanical properties and texture evolutions of the as-rolled AZ31 Mg sheets were investigated.The results show that the grains of the sheets are significantly refined after hot rolling.The mechanical properties of the as-rolled samples are enhanced due to the grain size refinement.The intensity of basal texture decreases with the increase of deformation ratio,and double-peak type basal texture is discovered in the intermediate and large strain hot rolling processes.The formation of the texture is ascribed to the activities of prismatic and non-basalslips,which is the same as the 30%rolled and 50%rolled samples.The incline of basal planes exerts an effect on the mechanical anisotropy during tension along rolling direction(RD)and transverse direction(TD)at room temperature.展开更多
A collector with high perveance,efficient recu-peration,and low secondary emissions is required for the 450-keV electron cooler in the HIAF accelerator complex.To optimize the collection efficiency of the collector,a ...A collector with high perveance,efficient recu-peration,and low secondary emissions is required for the 450-keV electron cooler in the HIAF accelerator complex.To optimize the collection efficiency of the collector,a simulation program,based on the Monte Carlo simulations,was developed in the world’s first attempt to calculate the electron collection efficiency.In this program,the backscattering electrons and secondary electrons generated on the collector surface are calculated using a Monte Carlo approach,and all electron trajectories in the collector region are tracked by the Runge–Kutta method.In this paper,the features and structure of our program are described.The backscattering electron yields,with various collector surface materials,are calculated using our pro-gram.Moreover,the collector efficiencies for various col-lector structures and electromagnetic fields are simulated and optimized.The measurement results of the collection efficiency of the HIAF collector prototype and the CSRm synchrotron are also reported.These experimental results were in good agreement with the simulation results of our program.展开更多
Aluminum alloys AA6061 reinforced with various amounts （0, 2.5% and 5%, mass fraction） of TiC particles were synthesized by the in situ reaction of inorganic salt K2TiF6 and ceramic particle SiC with molten aluminum...Aluminum alloys AA6061 reinforced with various amounts （0, 2.5% and 5%, mass fraction） of TiC particles were synthesized by the in situ reaction of inorganic salt K2TiF6 and ceramic particle SiC with molten aluminum. The casting was carried out at an elevated temperature and held for a longer duration to decompose SiC to release carbon atoms. X-ray diffraction patterns of the prepared AMCs clearly revealed the formation of TiC particles without the occurrence of any other intermetallic compounds. The microstructure of the prepared AA6061/TiC AMCs was studied using field emission scanning electron microscope （FESEM） and electron backscatter diffraction （EBSD）. The in situ formed TiC particles were characterized with homogeneous distribution, clear interface, good bonding and various shapes such as cubic, spherical and hexagonal. EBSD maps showed the grain refinement action of TiC particles on the produced composites. The formation of TiC particles boosted the microhardness and ultimate tensile strength （UTS） of the AMCs.展开更多
基金the National Natural Science Foundation of China!10045001
文摘We present a coaxial detection of the backscattered electrons in SEM. The lens-aperture has been used to filter in energy and focus the backscattered electrons. This particular geometry allows us to eliminate the low energy backscattered electrons and collect the backscattered electrons, which are backscattered close to the incident beam orientation. The main advantage of this geometry is adapted to topographic contrast attenuation and atomic number contrast enhancement. Thus this new SEM is very suitable to analyze the material composition.
基金This work was supported by the National Natural Science Foundation of China(No.10025420 and No.90206009).
文摘The full energy distribution of backscattered electrons from the elastic peak do wn to the true-secondary electron peak for heavy metals, Ta, W, Pt and Au, in Au ger electron spectroscopy in the EN(E) mode has been studied with a Monte Carlo simulation method, which includes cascade-secondary-electron production. The sim ulation model is based on the use of a dielectric function for describing inelas tic scattering and secondary excitation, and on the use of Mott cross sections f or elastic scattering. A systematic comparison between the calculated and experi mental spectra measured with a cylindrical mirror analyzer has been made for pri mary energies ranging from 1 to 5keV. Excellent agreement was obtained for these heavy metals on the backscattering background at primary energies in the keV re gion. A significant contribution of cascade secondary electrons to the measured spectra on the low-energy side was found.
基金This work wus supporeal by the National Naturul Science Foundation of China(No.10025420 and No.90206009).
文摘A new parallel Monte Carlo simulation method of secondary electron (SE) and back scattered electron images (BSE) of scanning electron microscopy (SEM) for a com plex geometric structure has been developed. This paper describes briefly the si mulation method and the modification to the conventional sampling method for the step length. Example simulation results have been obtained for several artifici al structures.
文摘By using the Monte Carlo method, we simulated the trajectories of coaxial backscattering electrons corresponding to a new type of scanning electron microscope. From the calculated results, we obtain a universal expression, which describes with good accuracy the backscattering coefficient versus film thickness under all conditions used. By measuring the coaxial backscattering coefficient and using this universal formula, the thickness of thin films can be determined if the composition is known.
基金This work was supported by the National Natural Science Foundation of China under grant No.50171040.
文摘In this paper, the orange peel defect in the surface range of the st14 steel sheet has been investigated using the electron backscattered diffraction (EBSD) technique. It has been found that the orange peel defect in the st14 steel sheet was resulted from the local coarse grains which were produced during hot-rolling due to the critical deformation in dual-phase zone. During deep drawing, the coarse grains with {100}<001> microtexture can slip on the {112}<111> slip system to form bulging and yields orange peel defects, while the coarse grains with {112}<110> orientation do not form the defect as the Schmid factor of {112}<111> slip system in it equals zero.
基金supported by National Natural Science Foundation of China(No.61302010)the Foundation of Science and Technology on High Power Microwave Laboratory,Central University Foundation(2013KW07)Work at the University of New Mexico in USA was supportedby ONR Grant N00014-13-1-0565
文摘Prticle-in-cell（PIC） simulations demonstrated that,when the relativistic magnetron with diffraction output（MDO） is applied with a 410 kV voltage pulse,or when the relativistic magnetron with radial output is applied with a 350 kV voltage pulse,electrons emitted from the cathode with high energy will strike the anode block wall.The emitted secondary electrons and backscattered electrons affect the interaction between electrons and RF fields induced by the operating modes,which decreases the output power in the radial output relativistic magnetron by about 15%（10%for the axial output relativistic magnetron）,decreases the anode current by about 5%（5%for the axial output relativistic magnetron）,and leads to a decrease of electronic efficiency by 8%（6%for the axial output relativistic magnetron）.The peak value of the current formed by secondary and backscattered current equals nearly half of the amplitude of the anode current,which may help the growth of parasitic modes when the applied magnetic field is near the critical magnetic field separating neighboring modes.Thus,mode competition becomes more serious.
基金the National Natural Science Foundation of China(Grant Nos.52325406,52374331,and U1960203)the Program of Introducing Talents of Discipline to Universities(Grant No.B21001).
文摘In this study, novel reconstruction methods, including grain graph and variant graph, were established to reconstruct parent austenite on the basis of electron backscatter diffraction (EBSD) data. The evaluation indicators included boundary identification and variant distribution. Moreover, an innovative variant pair analysis method was proposed. The results indicated that the Kurdjumov-Sachs orientation relationship was the most appropriate because it had the smallest refinement error and deviation. In addition, the variant graph reconstruction was more effective in reducing mis-indexing areas than the grain graph, exhibiting a robust capacity to accurately identify austenite grain boundaries. Additionally, the variant graph reconstruction induced the transformation of variants, variant pairs, close-packed plane (CP) groups, and Bain groups. Moreover, various reconstructed datasets (calc-grain data and EBSD data) affected the distribution of variants. The austenite grains reconstructed from the calc-grain data featured two or more variants clustered within the same region due to the preprocessing (calculating, filtering, and smoothing) of the EBSD data. These variations did not impede the microstructural analysis when consistent original data and reconstruction methods were used. The reconstruction of parent austenite grains holds promise for providing a fresh perspective and a deeper understanding of strengthening and toughening mechanisms in the future.
基金financially supported by the European Coal and Steel Community(RFCS-2015.No.709828).
文摘The microstructure development of 55VNb1 microalloyed steel after warm deformation via multi-pass biaxial compression tests was studied,and the effect of thermomechanical conditions on spheroidisation of cementite lamellae and ferrite recrystallisation for a range of deformation temperatures(600–700℃),cooling/soaking time(water quenching,air cooling,10 and 30 min of soaking time)and interpass time(0–10 s)was analysed.During deformation,the spheroidisation of pearlite is dynamically accelerated mainly by boundary splitting mechanism together with the rapid dissolution of cementite,while ferrite softening is attributed to dynamic recovery and continuous dynamic recrystallisation.The strong microstructural evolution during cooling/soaking time indicates that deformation energy accumulated is sufficient to activate metallurgical phenomena in both phases also statically.Static spheroidisation is a diffusive process,with rate controlled by the diffusion of vacancies,as suggested by the estimated activation energy.Ferrite refinement is the result of the evolution of continuous recrystallisation and pinning effect exerted by fine,globulised and homogeneously dispersed cementite particles.Increasing temperature causes accelerated kinetics in metallurgical phenomena;therefore,cooling/soaking time becomes key parameters to achieve ultrafine grained and spheroidised microstructures.Interpass time favours spheroidisation and promotes continuous recrystallisation;however,it must be carefully controlled to find a balance between recrystallisation and Ostwald ripening to optimise microstructural development.
基金the Natural Sciences and Engineering Research Council of Canada(NSERC),Natural Resources Canada(NRCan),Alberta Innovates,and the National Natural Science Foundation of China(NSFC)(Grant Nos.52271012 and 51871168)for the financial support.
文摘The rapidly increasing scientific interest in 3D-printed high-entropy alloys(HEAs)necessitates the understanding of their deformation mechanisms.Here,we present the grain rotation behavior of a nearly equiatomic CrMnFeCoNi HEA fabricated with laser-beam powder bed fusion via quasi in-situ electron backscatter diffraction(EBSD)observations during compressive deformation.The rotation paths of grains can be predicted via a new lattice reorientation factor(m_(A)),defined as the average of primary and secondary slip Schmid factors.The grains that initially have their〈111〉directions oriented close to the loading direction with low-to-intermediate m_(A)values tend to rotate towards the〈101〉pole.The grains initially oriented in the center of inverse pole figures with high m_(A)values develop multiple rotation paths pointing away from the〈001〉pole.The cube-oriented grains with their〈001〉directions close to the loading direction undergo face-centered cubic(FCC)-to-hexagonal close-packed(HCP)phase transformation due to the activation of octahedral slip involving multiple slip systems.This transformation can be well elucidated via a modified parameter,defined as the average of four maximum Schmid factors on each of four{111}slip/twinning planes in FCC crystals.The findings provide new insights into the underlying mechanisms for deformation-induced grain rotation and phase transformation,and help pave the way for developing advanced HEAs via transformation-induced plasticity.
基金supported by the Talent Scientific Research Fund of LNPU(No.2019XJJ-004)the Basic Scientific Research Project of the Higher Education Department of Liaoning Province(No.JYTMS20231428).
文摘The preferred microstructure and formation of variants during martensitic transformation of titanium alloys are very important for understanding and optimizing the mechanical properties of alloys.However,the main contribution of variant selection in the past two decades mainly focused on the issues associated with the interfaces,and a comprehensive explanation at the micro atomic level is still lacking.In the current work,EBSD,TEM,and SEM were used to analyze the essence of variant selection in combination with the valence electron theory of alloys(VE-theory)and cellular automata(CA)modeling.The results show that the driving force and atom path can be demonstrated for the collective shear and rotation displacements of atoms in martensitic transition;the martensitic variant selection in Ti6Al4V alloy has greater randomness in three aspects,namely area ratio of martensitic variants,two variants formed by the same crystal plane of parent phaseβ,and the variant distribution ratios of five typical grain boundaries.The preferred selection ofα'variant is mainly affected by atom interaction and element distribution,especially Al and V elements.The dislocation pile-up and the softβphase in martensitic variants are two of the main factors to affect the hardness variation of lath martensite and acicular martensite.
文摘Employing experimental equipment and techniques,such as electron backscatter diffraction,transmission Kikuchi diffraction,and transmission electron microscopy,the microstructure,phase structure,and orientation relationships of 0.6μm electroplated nickel(Ni)steel following annealing at 580-650℃for 15-30 hours were investigated.A comprehensive analysis was conducted to gain insights into the complex changes in the material's properties due to the annealing process.The results reveal that prolonged annealing led to considerable long-range diffusion of surface Ni atoms into the substrate of the 0.6μm Ni-plated steel.This diffusion process resulted in the formation of an alloy diffusion layer,approximately 4μm in thickness,which altered the material's microstructural characteristics.The extent of diffusion and its effect on the microstructure and structure were meticulously quantified.At the annealing temperature,the diffused Ni in the substrate,acting as an austenite-stabilizing element,expanded the austenite phase region.The alloy layer at this temperature predominantly consisted of the face-centered cubic(FCC)-structuredγ(Fe,Ni)solid solution.Upon cooling to room temperature,the alloy diffusion layer evolved into a dual-layer composite structure.The upper layer mainly comprised the FCC-structuredγ(Fe,Ni)solid solution,interspersed with a minor FCC compound superstructure phase.The lower layer underwent a diffusionless phase transformation during cooling,which led to the formation of the body-centered tetragonal/body-centered cubic-structured martensite.This phase,which is known for its high hardness and numerous variants,maintained the classic Kurdjumov-Sachs orientation relationship with the upper FCC parent phase,and it satisfied the close-packed plane{111}γ//{110}α′and close-packed direction<110>γ//<111>α′.A detailed analysis of the different phases within the alloy layer and their phase transitions was presented,offering an in-depth understanding of the material's characteristics.
文摘This study examines the effects of friction stir welding(FSW)and post-weld heat treatment(PWHT)on the grain boundary character distribution and corrosion resistance of cross sectional(top and bottom)regions of nickel-and molybdenum-free high-nitrogen austenitic stainless steel(HNASS).FSW at 400 rpm and 30 mm/min resulted in finer grains(4.18μm)and higher coincident site lattice(CSL)boundaries(32.3%)at the top of the stir zone(SZ)due to dynamic recrystallization(DRX).PWHT at 900℃for 1 h led to grain coarsening(12.91μm the bottom SZ)but enhanced CSL boundaries from 24.6%to 30.2%,improving grain boundary stability.PWHT reduced the kernel average misorientation(KAM)by 14.9%in the SZ-top layer and 20.4%in the SZ-bottom layer,accompanied by a 25%decrease in hardness in the SZ-top layer and 26.7%in the SZ-bottom layer,indicating strain recovery and reduced dislocation density.Potentiodynamic polarization tests(PDP)showed a 18%increase in pitting potential and a 76%reduction in corrosion rate after PWHT.The improvement in corrosion resistance is attributed to the increase inΣ3 twin boundaries,which enhance grain boundary stability and reduce susceptibility to localized corrosion.These findings highlight the role of PWHT in refining the microstructure and strengthening corrosion resistance,making HNASS a promising material for demanding applications.
基金supported by the General Project of Liaoning Provincial Department of Education(NO:JYTMS20231199)Project of Liaoning Education Department(No:LKMZ20220462 and No:LJKMZ20220467)+1 种基金Basic scientific research project of Liaoning Provincial Department of Education(key research project)(No:JYTZD2023108)Liaoning Nature Fund Guidance Plan(No:42022-BS.179)。
文摘In this study,the twinning-detwinning behavior and slip behavior of rolled AZ31 magnesium-alloy plates during a three-step intermittent dynamic compression process along the rolling direction(RD)and normal direction(ND),are investigated via quasi-in situ electron backscatter diffraction,and the causes of the twinning and detwinning behavior are explained according to Schmid law,local strain coordination,and slip trajectories.It is found that the twins are first nucleated and grow at a compressive strain of 3%along the RD.In addition to the Schmid factor(SF),the strain coordination factor(m’)also influences the selection of the twin variants during the twinning process,resulting in the nucleation of twins with a low SF.During the second and third steps of the application of continuous compressive strains with magnitudes and directions of 3%RD+3%ND and 3%RD+3%ND+2.5%ND,detwinning occurs to different extents.The observation of the detwinning behavior reveals that the order in which multiple twins within the same grain undergo complete detwinning is related to Schmid law and the strain concentration,with a low SF and a high strain concentration promoting complete detwinning.The interaction between slip dislocations and twin boundaries in the deformed grains as well as the pinning of dislocations at the tips of the {1012} tensile twins with a special structure result in incomplete detwinning.Understanding the microstructural evolution and twinning behavior of magnesium alloys under different deformation geometries is important for the development of high-strength and high-toughness magnesium alloys.
文摘Nanoindentation and high resolution electron backscatter diffraction（EBSD） were combined to examine the elastic modulus and hardness of α and β phases,anisotropy in residual elastic stress strain fields and distributions of geometrically necessary dislocation（GND） density around the indentations within TA15 titanium alloy.The nano-indention tests were conducted on α and β phases,respectively.The residual stress strain fields surrounding the indentation were calculated through crosscorrelation method from recorded patterns.The GND density distribution around the indentation was calculated based on the strain gradient theories to reveal the micro-mechanism of plastic deformation.The results indicate that the elastic modulus and hardness for α p hase are 129.05 GPas and 6.44 GPa,while for β phase,their values are 109.80 GPa and 4.29 GPa,respectively.The residual Mises stress distribution around the indentation is relatively heterogeneous and significantly influenced by neighboring soft β phase.The region with low residual stress around the indentation is accompanied with markedly high a type and prismatic-GND density.
基金Projects(50674067,51074106,51374145)supported by the National Natural Science Foundation of ChinaProject(09JC1408200)supported by the Science and Technology Commission of Shanghai Municipality,China+1 种基金Project(2011BAE22B01-5)supported by the National Key Technology R&D Program of ChinaProjects(182000/S10,192450/I30)supported by the Research Council of Norway
文摘Grain refinement of AZ31 Mg alloy during cyclic extrusion compression （CEC） at 225-400 ℃ was investigated quantitatively by electron backscattering diffraction （EBSD）. Results show that an ultrafine grained microstructure of AZ31 alloy is obtained only after 3 passes of CEC at 225 ℃. The mean misorientation and the fraction of high angle grain boundaries （HAGBs） increase gradually by lowering extrusion temperature. Only a small fraction of {101^-2} twinning is observed by EBSD in AZ31 Mg alloys after 3 passes of CEC. Schmid factors calculation shows that the most active slip system is pyramidal slip {101^-1}〈1120〉and basal slip {0001}〈1120〉 at 225-350 ℃ and 400 ℃, respectively. Direct evidences at subgrain boundaries support the occurrence of continuous dynamic recrystallization （CDRX） mechanism in grain refinement of AZ31 Mg alloy processed by CEC.
基金Project (192450/I30) supported by the Norwegian Research Council under the Strategic University Program
文摘With the help of FESEM, high resolution electron backscatter diffraction can investigate the grains/subgrains as small as a few tens of nanometers with a good angular resolution （~0.5°）. Fast development of EBSD speed （up to 1100 patterns per second） contributes that the number of published articles related to EBSD has been increasing sharply year by year. This paper reviews the sample preparation, parameters optimization and analysis of EBSD technique, emphasizing on the investigation of ultrafine grained and nanostructured materials processed by severe plastic deformation （SPD）. Detailed and practical parameters of the electropolishing, silica polishing and ion milling have been summarized. It is shown that ion milling is a real universal and promising polishing method for EBSD preparation of almost all materials. There exists a maximum value of indexed points as a function of step size. The optimum step size depends on the magnification and the board resolution/electronic step size. Grains/subgrains and texture, and grain boundary structure are readily obtained by EBSD. Strain and stored energy may be analyzed by EBSD.
文摘The relation between the Mg treatment and ferrite grain boundaries misorientation was investigated. The orientation imaging microscopy technique based on electron backscattered diffraction technique （EBSD） was used in this work. （t was found that the addition of 0.005 wt% Mg to the steel could evidently increase the ratio of acicular ferrite crystals appearing at large angles boundaries to each other, which was attributed to the nucleation of the second-phase particles by the Mg treatment. The FBSD techniques provide a power- ful method to characterize and quantify the ferrite grain boundaries misorientation, in order to relate it to toughness.
文摘Mechanical properties and texture evolutions of the as-rolled AZ31 Mg sheets were investigated.The results show that the grains of the sheets are significantly refined after hot rolling.The mechanical properties of the as-rolled samples are enhanced due to the grain size refinement.The intensity of basal texture decreases with the increase of deformation ratio,and double-peak type basal texture is discovered in the intermediate and large strain hot rolling processes.The formation of the texture is ascribed to the activities of prismatic and non-basalslips,which is the same as the 30%rolled and 50%rolled samples.The incline of basal planes exerts an effect on the mechanical anisotropy during tension along rolling direction(RD)and transverse direction(TD)at room temperature.
基金This work was supported by the International Partnership Program of the Chinese Academy of Sciences(No.113462KYSB20170051)the National Natural Science Foundation of China(No.11575264)the National Key R&D Program of China(No.2019YFA0405400).
文摘A collector with high perveance,efficient recu-peration,and low secondary emissions is required for the 450-keV electron cooler in the HIAF accelerator complex.To optimize the collection efficiency of the collector,a simulation program,based on the Monte Carlo simulations,was developed in the world’s first attempt to calculate the electron collection efficiency.In this program,the backscattering electrons and secondary electrons generated on the collector surface are calculated using a Monte Carlo approach,and all electron trajectories in the collector region are tracked by the Runge–Kutta method.In this paper,the features and structure of our program are described.The backscattering electron yields,with various collector surface materials,are calculated using our pro-gram.Moreover,the collector efficiencies for various col-lector structures and electromagnetic fields are simulated and optimized.The measurement results of the collection efficiency of the HIAF collector prototype and the CSRm synchrotron are also reported.These experimental results were in good agreement with the simulation results of our program.
文摘Aluminum alloys AA6061 reinforced with various amounts （0, 2.5% and 5%, mass fraction） of TiC particles were synthesized by the in situ reaction of inorganic salt K2TiF6 and ceramic particle SiC with molten aluminum. The casting was carried out at an elevated temperature and held for a longer duration to decompose SiC to release carbon atoms. X-ray diffraction patterns of the prepared AMCs clearly revealed the formation of TiC particles without the occurrence of any other intermetallic compounds. The microstructure of the prepared AA6061/TiC AMCs was studied using field emission scanning electron microscope （FESEM） and electron backscatter diffraction （EBSD）. The in situ formed TiC particles were characterized with homogeneous distribution, clear interface, good bonding and various shapes such as cubic, spherical and hexagonal. EBSD maps showed the grain refinement action of TiC particles on the produced composites. The formation of TiC particles boosted the microhardness and ultimate tensile strength （UTS） of the AMCs.
