In order to enhance the p-type doping concentration in the LBSF, boron was added into the aluminum paste and boron doped local back surface field（B-LBSF） was successfully fabricated in this work. Through boron dopin...In order to enhance the p-type doping concentration in the LBSF, boron was added into the aluminum paste and boron doped local back surface field（B-LBSF） was successfully fabricated in this work. Through boron doping in the LBSF, much higher doping concentration was observed for the B-LBSF over the Al-LBSF. Higher doping concentration in the LBSF is expected to lead to better rear passivation and lower rear contact resistance. Based on one thousand pieces of solar cells for each type, it was found that the rear passivated crystalline silicon solar cells with B-LBSF showed statistical improvement in their photovoltaic properties over those with Al-LBSF.展开更多
Hydrothermal precipitates associated with active vents in the eastern Manus Basin, an actively opening back-arc basin in the Bismarck Sea, Papua New Guinea, are among the most Cu-rich on the modern seafloor. The volca...Hydrothermal precipitates associated with active vents in the eastern Manus Basin, an actively opening back-arc basin in the Bismarck Sea, Papua New Guinea, are among the most Cu-rich on the modern seafloor. The volcanic rocks associated with this mineralization may be insufficiently enriched in Cu to account for the Cu content of the sulfides by simple leaching. The PACMANUS hydrothermal field lies in the eastern portion of the eastern Manus Basin. Mass balance modeling of the PACMANUS hydrothermal system indicates that simple leaching of a stationary reaction zone (0.144 km^3) by hydrothermal fluids cannot yield the Cu found in associated sulfide deposits because unacceptably high leaching, transportation and precipitation efficiencies are required to derive the Cu in sulfides by leaching processes. With 100% leaching, transport and precipitating efficiency, 0.166 km^3 of volcanic rocks would need to be leached to account for the Cu budget of hydrothermal sulfide deposits. The key requirement for forming metal-rich magmatic fluids is a large amount of metals available to enter the exsolved vapor phase. Magmas generated in the eastern Manus Basin inherently have high fO2 because of metasomatism of the mantle source by oxidized materials from the subducted slab, leading to copper enrichment in the magma chamber. Moreover, the presence of Cu in gas-rich melt inclusi on bubbles in Pual Ridge andesite is evidence that degassing and partitioning of Cu into the magmatic volatile phase has occurred in the eastern Manus Basin. Numerical mass balance modeling indicates that approximately 0.236 Mt Cu was potentially transferred to the hydrothermal system per cubic kilometer magma. Magmatic degassing seems to play a more significant role than leaching.展开更多
This work deals with determining the optimum thickness of the lamella wafer of silicon solar cell. The (p) base region makes up the bulk of the thickness of the wafer. This thickness has always been a factor limiting ...This work deals with determining the optimum thickness of the lamella wafer of silicon solar cell. The (p) base region makes up the bulk of the thickness of the wafer. This thickness has always been a factor limiting the performance of the solar cell, as it produces the maximum amount of electrical charges, contributing to the photocurrent. Determining the thickness of the wafer cannot be only mechanical. It takes into account the internal physical mechanisms of generation-diffusion-recombination of excess minority carriers. They are also influenced by external factors such as temperature and magnetic field. Under these conditions, magneto transport equation is required to be applied on excess minority carrier in lamella base silicon solar cell. It yields maximum diffusion coefficient which result on Lorentz law and Umklapp process. Then from photocurrent, back surface recombination velocity expressions are derived, both maximum diffusion coefficient and thickness dependent. The plot of the back surface recombination calibration curves as function of lamella width, leads to its maximum values, trough intercept points. Lamella optimum width is then obtained, both temperature and magnetic field dependent and expressed in relationships to show the required base thickness in the elaboration process.展开更多
This paper reports that a novel type of suspended ZnO nanowire field-effect transistors （FETs） were successfully fabricated using a photolithography process, and their electrical properties were characterized by I-V...This paper reports that a novel type of suspended ZnO nanowire field-effect transistors （FETs） were successfully fabricated using a photolithography process, and their electrical properties were characterized by I-V measurements. Single-crystalline ZnO nanowires were synthesized by a hydrothermal method, they were used as a suspended ZnO nanowire channel of back-gate field-effect transistors （FET）. The fabricated suspended nanowire FETs showed a pchannel depletion mode, exhibited high on-off current ratio of -10^5. When VDS = 2.5V, the peak transconductances of the suspended FETs were 0.396 μS, the oxide capacitance was found to be 1.547 fF, the pinch-off voltage VTH was about 0.6 V, the electron mobility was on average 50.17cm2/Vs. The resistivity of the ZnO nanowire channel was estimated to be 0.96 × 10^2 Ω cm at VGS = 0 V. These characteristics revealed that the suspended nanowire FET fabricated by the photolithography process had excellent performance. Better contacts between the ZnO nanowire and metal electrodes could be improved through annealing and metal deposition using a focused ion beam.展开更多
基金Funded by the National Natural Science Foundation of China(61366004)the Research Fund for the Doctoral Program of Higher Education(20123601110006)the Jiangxi Provincial Department of Education(KJLD13008)
文摘In order to enhance the p-type doping concentration in the LBSF, boron was added into the aluminum paste and boron doped local back surface field（B-LBSF） was successfully fabricated in this work. Through boron doping in the LBSF, much higher doping concentration was observed for the B-LBSF over the Al-LBSF. Higher doping concentration in the LBSF is expected to lead to better rear passivation and lower rear contact resistance. Based on one thousand pieces of solar cells for each type, it was found that the rear passivated crystalline silicon solar cells with B-LBSF showed statistical improvement in their photovoltaic properties over those with Al-LBSF.
基金The National Natural Science Foundation of China under contract Nos 41706052,41476044 and 41325021the National Program on Global Change and Air-Sea Interaction under contract No.GASI-GEOGE-02+11 种基金the National Basic Research Program(973 Program)of China under contract No.2013CB429700the International Partnership Program of Chinese Academy of Sciences under contract No.133137KYSB20170003the Strategic Priority Research Program of the Chinese Academy of Sciences under contract No.XDA11030302the Special Fund for the Taishan Scholar Program of Shandong Province under contract No.ts201511061the National Special Fund for the 13th Five Year Plan of COMRA under contract No.DY135-G2-1-02the AoShan Talents Program supported by Qingdao National Laboratory for Marine Science and Technology under contract No.2015ASTP-0S17the Innovative Talent Promotion Program under contract No.2012RA2191the Science and Technology Development Program of Shandong Province under contract No.2013GRC31502the Scientific and Technological Innovation Project financially supported by Qingdao National Laboratory for Marine Science and Technology under contract No.2015ASKJ03the National High Level Talent Special Support ProgramCAS/SAFEA International Partnership Program for Creative Research TeamsQingdao Collaborative Innovation Center of Marine Science and Technology
文摘Hydrothermal precipitates associated with active vents in the eastern Manus Basin, an actively opening back-arc basin in the Bismarck Sea, Papua New Guinea, are among the most Cu-rich on the modern seafloor. The volcanic rocks associated with this mineralization may be insufficiently enriched in Cu to account for the Cu content of the sulfides by simple leaching. The PACMANUS hydrothermal field lies in the eastern portion of the eastern Manus Basin. Mass balance modeling of the PACMANUS hydrothermal system indicates that simple leaching of a stationary reaction zone (0.144 km^3) by hydrothermal fluids cannot yield the Cu found in associated sulfide deposits because unacceptably high leaching, transportation and precipitation efficiencies are required to derive the Cu in sulfides by leaching processes. With 100% leaching, transport and precipitating efficiency, 0.166 km^3 of volcanic rocks would need to be leached to account for the Cu budget of hydrothermal sulfide deposits. The key requirement for forming metal-rich magmatic fluids is a large amount of metals available to enter the exsolved vapor phase. Magmas generated in the eastern Manus Basin inherently have high fO2 because of metasomatism of the mantle source by oxidized materials from the subducted slab, leading to copper enrichment in the magma chamber. Moreover, the presence of Cu in gas-rich melt inclusi on bubbles in Pual Ridge andesite is evidence that degassing and partitioning of Cu into the magmatic volatile phase has occurred in the eastern Manus Basin. Numerical mass balance modeling indicates that approximately 0.236 Mt Cu was potentially transferred to the hydrothermal system per cubic kilometer magma. Magmatic degassing seems to play a more significant role than leaching.
文摘This work deals with determining the optimum thickness of the lamella wafer of silicon solar cell. The (p) base region makes up the bulk of the thickness of the wafer. This thickness has always been a factor limiting the performance of the solar cell, as it produces the maximum amount of electrical charges, contributing to the photocurrent. Determining the thickness of the wafer cannot be only mechanical. It takes into account the internal physical mechanisms of generation-diffusion-recombination of excess minority carriers. They are also influenced by external factors such as temperature and magnetic field. Under these conditions, magneto transport equation is required to be applied on excess minority carrier in lamella base silicon solar cell. It yields maximum diffusion coefficient which result on Lorentz law and Umklapp process. Then from photocurrent, back surface recombination velocity expressions are derived, both maximum diffusion coefficient and thickness dependent. The plot of the back surface recombination calibration curves as function of lamella width, leads to its maximum values, trough intercept points. Lamella optimum width is then obtained, both temperature and magnetic field dependent and expressed in relationships to show the required base thickness in the elaboration process.
文摘This paper reports that a novel type of suspended ZnO nanowire field-effect transistors （FETs） were successfully fabricated using a photolithography process, and their electrical properties were characterized by I-V measurements. Single-crystalline ZnO nanowires were synthesized by a hydrothermal method, they were used as a suspended ZnO nanowire channel of back-gate field-effect transistors （FET）. The fabricated suspended nanowire FETs showed a pchannel depletion mode, exhibited high on-off current ratio of -10^5. When VDS = 2.5V, the peak transconductances of the suspended FETs were 0.396 μS, the oxide capacitance was found to be 1.547 fF, the pinch-off voltage VTH was about 0.6 V, the electron mobility was on average 50.17cm2/Vs. The resistivity of the ZnO nanowire channel was estimated to be 0.96 × 10^2 Ω cm at VGS = 0 V. These characteristics revealed that the suspended nanowire FET fabricated by the photolithography process had excellent performance. Better contacts between the ZnO nanowire and metal electrodes could be improved through annealing and metal deposition using a focused ion beam.
