The spring-back of a bending metal tube was studied through extensive experiments and finite element method （FEM） analysis. An approximate equation for the spring-back angle of bending was deduced. It is noted that ...The spring-back of a bending metal tube was studied through extensive experiments and finite element method （FEM） analysis. An approximate equation for the spring-back angle of bending was deduced. It is noted that the mechanical properties of the material （in a tubular form） are quite different from those found in the standard tensile tests （when the materials are in bar forms）. This is one of the major reasons that result in the discrepancies in the outcomes of experimental study, FEM calculations, and spring-back analysis. It is therefore of crucial importance to study the mechanical properties of the materials in their tubular forms. The experiments and FEM simulations prove that the spring-back angle is significantly affected by the mechanical properties of the materials. The angle decreases accordingly with plastic modulus, but changes inversely with the hardening index and elastic modulus The spring-back angle is also affected by the conditions of tube deformation： it increases accordingly with the relative bending radius but changes inversely with the relative wall thickness. In addition, the spring-back angle increases nonlinearly with the bending angle.展开更多
Based on the continuity of the derivatives of the Non-Uniform Rational B-Splines (NURBS) curve and the Jaumann strain measure, the present paper adopted the position coordinates of the control points as the degrees of...Based on the continuity of the derivatives of the Non-Uniform Rational B-Splines (NURBS) curve and the Jaumann strain measure, the present paper adopted the position coordinates of the control points as the degrees of freedom and developed a planar rotation-free Euler-Bernoulli beam element for isogeometric analysis, where the derivatives of the field variables with respect to the arc-length were expressed as the sum of the weighted sum of the position coordinates of the control points, and the NURBS basis functions were used as the weight functions. Furthermore, the concept of bending strip was used to involve the rigid connection between multiple patches. Several typical examples with geometric nonlinearities were used to demonstrate the accuracy and effectiveness of the proposed algorithm. The presented formulation fully accounts for the geometric nonlinearities and can be used to study the snap-through and snap-back phenomena of flexible beams.展开更多
文摘The spring-back of a bending metal tube was studied through extensive experiments and finite element method （FEM） analysis. An approximate equation for the spring-back angle of bending was deduced. It is noted that the mechanical properties of the material （in a tubular form） are quite different from those found in the standard tensile tests （when the materials are in bar forms）. This is one of the major reasons that result in the discrepancies in the outcomes of experimental study, FEM calculations, and spring-back analysis. It is therefore of crucial importance to study the mechanical properties of the materials in their tubular forms. The experiments and FEM simulations prove that the spring-back angle is significantly affected by the mechanical properties of the materials. The angle decreases accordingly with plastic modulus, but changes inversely with the hardening index and elastic modulus The spring-back angle is also affected by the conditions of tube deformation： it increases accordingly with the relative bending radius but changes inversely with the relative wall thickness. In addition, the spring-back angle increases nonlinearly with the bending angle.
基金Project supported by the National Natural Science Foundation of China(Nos.11572132 and 11572137)
文摘Based on the continuity of the derivatives of the Non-Uniform Rational B-Splines (NURBS) curve and the Jaumann strain measure, the present paper adopted the position coordinates of the control points as the degrees of freedom and developed a planar rotation-free Euler-Bernoulli beam element for isogeometric analysis, where the derivatives of the field variables with respect to the arc-length were expressed as the sum of the weighted sum of the position coordinates of the control points, and the NURBS basis functions were used as the weight functions. Furthermore, the concept of bending strip was used to involve the rigid connection between multiple patches. Several typical examples with geometric nonlinearities were used to demonstrate the accuracy and effectiveness of the proposed algorithm. The presented formulation fully accounts for the geometric nonlinearities and can be used to study the snap-through and snap-back phenomena of flexible beams.
