Some numerical models such as central atoms model （CAM） and superelement model were used to simulate the thermodynamics of austenite decomposition in the Fe-C-Mn-Si TRIP （transformation induced plasticity） steels....Some numerical models such as central atoms model （CAM） and superelement model were used to simulate the thermodynamics of austenite decomposition in the Fe-C-Mn-Si TRIP （transformation induced plasticity） steels. Thermodynamic calculations were carried out under a para-equilibrium （PE） condition. The results show that certain silicon content can accelerate the polygonal ferritic transformation and increase the volume fraction and stability of retained austenite by retarding the precipitation of carbides during the bainitic transformation.展开更多
Advanced high strength steels for pipeline applications,e.g.X80 grades,have complex microstructures and are frequently microalloyed with Nb.In the hot rolled product it is sought to have Nb precipitated as Nb(CN).Howe...Advanced high strength steels for pipeline applications,e.g.X80 grades,have complex microstructures and are frequently microalloyed with Nb.In the hot rolled product it is sought to have Nb precipitated as Nb(CN).However,when processing these steels Nb may be in solution and critically affects the microstructure evolution,e.g.austenite decomposition on the run-out table of a hot mill.Further,microstructure changes in the heat affected zone (HAZ) during girth welding of these linepipe steels may occur with Nb precipitated or in solution.In the HAZ,depending on welding procedures,the material undergoes a number of austenite formation and decomposition cycles and the amount of Nb in solution varies along these stages.In selected positions of the HAZ,thermal cycles peak at the intercritical region and the partial formation of austenite and subsequent decomposition constitutes additional complexity.Developing reliable process models for run-out table cooling and the HAZ hinges on an accurate tracking of microstructure evolution,which is strongly influenced by the amount of Nb in solution.The present study provides more insight into the effect of Nb on austenite formation and decomposition.Firstly,a novel experimental methodology is presented to measure quantitatively the effect of Nb on transformation temperatures pertinent to austenite decomposition,notably ferrite.A model for ferrite formation that accounts for solute drag of Nb is proposed to describe the experimental observations.Secondly,an experimental study will be presented to quantify the effect of Nb in and out of solution on austenite formation in the intercritical region.It is found that the morphology of intercritical austenite,as well as the kinetics of its formation is strongly affected by the starting microstructure and the state of Nb.展开更多
The possible decomposition of metastable austenite during the partitioning process in the high end quenching and partitioning （Q＆P） steels is somewhat neglected by most researchers. The effects of primary martensit...The possible decomposition of metastable austenite during the partitioning process in the high end quenching and partitioning （Q＆P） steels is somewhat neglected by most researchers. The effects of primary martensite and alloying elements including manganese, cobalt and aluminum on the isothermal decomposition of austenite during typical Q＆P process were studied by dilatometry. The transformation kinetics was studied systematically and resulting microstruc tures were discussed in details. The results suggested that the primary martensite decreased the incubation period of isothermal decomposition by accelerating the nucleation process owing to dislocations especially on phase and grain boundaries. This effect can be eliminated by a flash heating which recovered dislocations. Co addition significantly promoted the bainite transformation during partitioning while A1 and Mn suppressed the isothermal bainite transformation. The bainite transformation played an important role in carbon distribution during partitioning, and hence the amount and stability of austenite upon final quenching. The bainite transformation during partitioning is an important factor in optimizing the microstructure in Q＆P steels.展开更多
In this paper a concept of 'leading probability' is presented. The difference in the leading probability between ferrite and cementite depends mainly upon the difference between their driving forces at the beg...In this paper a concept of 'leading probability' is presented. The difference in the leading probability between ferrite and cementite depends mainly upon the difference between their driving forces at the beginning of precipitation. The results of theromdynamic calculations showed that the leading probability of cementite increased with the increase of carbon concentration of austenite, and the decrease in transformation temperature was favourable to cementite's being the leading nucleus during pearlite transformation.展开更多
基金Item Sponsored by National Natural Science Foundation of China (50334010)
文摘Some numerical models such as central atoms model （CAM） and superelement model were used to simulate the thermodynamics of austenite decomposition in the Fe-C-Mn-Si TRIP （transformation induced plasticity） steels. Thermodynamic calculations were carried out under a para-equilibrium （PE） condition. The results show that certain silicon content can accelerate the polygonal ferritic transformation and increase the volume fraction and stability of retained austenite by retarding the precipitation of carbides during the bainitic transformation.
基金financial support by the Natural Sciences and Engineering Research Council of Canada(NSERC)Evraz Inc.NATrans Canada Pipelines,Ltd.
文摘Advanced high strength steels for pipeline applications,e.g.X80 grades,have complex microstructures and are frequently microalloyed with Nb.In the hot rolled product it is sought to have Nb precipitated as Nb(CN).However,when processing these steels Nb may be in solution and critically affects the microstructure evolution,e.g.austenite decomposition on the run-out table of a hot mill.Further,microstructure changes in the heat affected zone (HAZ) during girth welding of these linepipe steels may occur with Nb precipitated or in solution.In the HAZ,depending on welding procedures,the material undergoes a number of austenite formation and decomposition cycles and the amount of Nb in solution varies along these stages.In selected positions of the HAZ,thermal cycles peak at the intercritical region and the partial formation of austenite and subsequent decomposition constitutes additional complexity.Developing reliable process models for run-out table cooling and the HAZ hinges on an accurate tracking of microstructure evolution,which is strongly influenced by the amount of Nb in solution.The present study provides more insight into the effect of Nb on austenite formation and decomposition.Firstly,a novel experimental methodology is presented to measure quantitatively the effect of Nb on transformation temperatures pertinent to austenite decomposition,notably ferrite.A model for ferrite formation that accounts for solute drag of Nb is proposed to describe the experimental observations.Secondly,an experimental study will be presented to quantify the effect of Nb in and out of solution on austenite formation in the intercritical region.It is found that the morphology of intercritical austenite,as well as the kinetics of its formation is strongly affected by the starting microstructure and the state of Nb.
基金financial support from National Natural Science Foundation of China(Grant No.51574080)the National Key R&D Program of China(No.2017YFB0304201)
文摘The possible decomposition of metastable austenite during the partitioning process in the high end quenching and partitioning （Q＆P） steels is somewhat neglected by most researchers. The effects of primary martensite and alloying elements including manganese, cobalt and aluminum on the isothermal decomposition of austenite during typical Q＆P process were studied by dilatometry. The transformation kinetics was studied systematically and resulting microstruc tures were discussed in details. The results suggested that the primary martensite decreased the incubation period of isothermal decomposition by accelerating the nucleation process owing to dislocations especially on phase and grain boundaries. This effect can be eliminated by a flash heating which recovered dislocations. Co addition significantly promoted the bainite transformation during partitioning while A1 and Mn suppressed the isothermal bainite transformation. The bainite transformation played an important role in carbon distribution during partitioning, and hence the amount and stability of austenite upon final quenching. The bainite transformation during partitioning is an important factor in optimizing the microstructure in Q＆P steels.
文摘In this paper a concept of 'leading probability' is presented. The difference in the leading probability between ferrite and cementite depends mainly upon the difference between their driving forces at the beginning of precipitation. The results of theromdynamic calculations showed that the leading probability of cementite increased with the increase of carbon concentration of austenite, and the decrease in transformation temperature was favourable to cementite's being the leading nucleus during pearlite transformation.
