Polymeric perylene diimide(PDI)has been evidenced as a good candidate for photocatalytic water oxidation,yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration.Her...Polymeric perylene diimide(PDI)has been evidenced as a good candidate for photocatalytic water oxidation,yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration.Herein,with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern,the electronic structure is theoretically illustrated by the first-principles density functional theory calculations,suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI.It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal orbital Hamiltonian group analysis.The calculations of reaction free energy changes indicate that the oxygen evolution reaction should follow the reaction pathway of H_(2)O→^(*)OH→^(*)O→^(*)OOH→^(*)O_(2)with an overpotential of 0.81 V.Through an in-depth theoretical computational analysis in the atomic and electronic structures,the origin of photocatalytic oxygen evolution activity for PDI is well illustrated,which would help the rational design and modification of polymeric photocatalysts for efficient oxygen evolution.展开更多
Regulating the electronic structure and oxygencontaining intermediates adsorption behavior on Fe-based catalysts is of great significance to cope with the sluggish oxygen reduction reaction(ORR)kinetics,but it still r...Regulating the electronic structure and oxygencontaining intermediates adsorption behavior on Fe-based catalysts is of great significance to cope with the sluggish oxygen reduction reaction(ORR)kinetics,but it still remains a great challenge.In this work,Fe atom clusters(Fe_(AC))modified by high-density Cu single atoms(Cu_(SA))in a N,S-doped porous carbon substrate(Fe_(AC)/Cu_(SA)@NCS)is reported for enhanced ORR electrocatalysis.Fe_(AC)/Cu_(SA)@NCS exhibits excellent ORR performance with a half-wave potential(E_(1/2))of 0.911 V,a high four-electron process selectivity and excellent stability.The ORR performance is also verified in the Fe_(AC)/Cu_(SA)@NCS-based Zn-air battery,which shows a high peak power density of 192.67 mW cm^(-2),a higher specific capacity of 808.3 mAh g^(-1)and impressive charge-discharge cycle stability.Moreover,density functional theory calculations show that Cu single atoms synergistically modulate the electronic structure Fe active atoms in Fe atomic clusters,reducing the energy barrier of the rate-determining step(i.e.,*OH desorption)on Fe_(AC)/Cu_(SA)@NCS.This work provides an effective way to regulate the electronic structure of Fe-based catalysts and optimize their electrocatalytic activity based on the introduction of a second metal source.展开更多
Heteroatom doping is a promising strategy for designing cost-effective and stable electrocatalysts toward the oxygen evolution reaction(OER),but the enhancement mechanism remains unclear.Herein,atomic Ir-O-Cu and Ir-O...Heteroatom doping is a promising strategy for designing cost-effective and stable electrocatalysts toward the oxygen evolution reaction(OER),but the enhancement mechanism remains unclear.Herein,atomic Ir-O-Cu and Ir-O-Ir motifs are engineered into CuO nanowires via cation exchange and dehydration to elucidate the OER mechanism.Systematic characterizations confirm the atomic dispersion of Ir within the CuO lattice and the electron transfer from Ir to CuO while preserving the host structure.The asprepared single-atom Ir-doped CuO(IrSA-CuO),featuring predominant Cu-O-Ir motifs and coexisting IrO-Ir motifs,achieves a low OER overpotential of 204 mV at 10 mA cm^(-2)in 1 M KOH,coupled with a 69-fold higher mass activity than commercial IrO_(2).Furthermore,the Ir_(SA)-CuO maintains long-term stability for 300 h at 200 mA cm^(-2)with minimal overpotential alteration and an additional 120 h at500 mA cm^(-2)with overpotential increased by 15 mV.In situ Raman spectroscopy reveals that the Ir-O-Ir motifs suppress Cu^(Ⅱ) oxidation to Cu^(Ⅲ) by delaying the onset potential,enhancing the structural stability during OER.Density functional theory calculations demonstrate the Cu-O-Ir motifs lower the adsorption energy of bridged ^(*)O via asymmetric bonding,accelerating ^(*)OOH formation in the ratedetermining step.This work presents a heteroatom engineering strategy to balance electrocatalytic activity and durability,providing a blueprint for industrial electrocatalyst design.展开更多
The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt...The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt@Pt_(3)Ti core-shell nanoparticles with atomic-controllable shells through precise thermal diffusing Ti into Pt nanoparticles for effective and durable ORR.Combining theoretical and experiment analysis,we found that the lattice strain of Pt_(3)Ti shells can be tailored by precisely controlling the thick-ness of Pt_(3)Ti shell in atomic-scale on account of the lattice constant difference between Pt and Pt_(3)Ti to optimize adsorption properties of Pt_(3)Ti for ORR intermediates,thus enhancing its performance.The Pt@Pt_(3)Ti catalyst with one-atomic Pt_(3)Ti shell(Pt@1L-Pt_(3)Ti/TiO_(2)-C)demonstrates excellent performance with mass activity of 592 mA mgpt-1 and durability nearly 19.5-fold that of commercial Pt/C with negligible decay(2%)after 30,000 potential cycles(0.6-1.0 V vs.RHE).Notably,at higher potential cycles(1.0 V-1.5 V vs.RHE),Pt@1L-Pt_(3)Ti/TiO_(2)-C also showed far superior durability than Pt/C(9.6%decayed while 54.8% for commercial Pt/C).This excellent stability is derived from the intrinsic stability of Pt_(3)Ti alloy and the confinement effect of TiO_(2)-C.The catalyst's enhancement was further confirmed in PEMFC configuration.展开更多
Designing alloys capable of withstanding irradiation is a crucial aspect of developing materials for nuclear reactors and aerospace applications.Local chemical order(LCO)has recently been recognized as a new microstru...Designing alloys capable of withstanding irradiation is a crucial aspect of developing materials for nuclear reactors and aerospace applications.Local chemical order(LCO)has recently been recognized as a new microstructural parameter to leverage,and its effect on the mechanical properties of body-centered cubic(BCC)multi-principal element alloys(MPEAs)has attracted much attention.However,the impact of LCO on the dynamic evolution of irradiation-induced defects in BCC MPEAs remains much less explored.In this study,we engineered varying degrees of LCO and local lattice distortion in NbZrTi BCC MPEAs by alloying them with different concentrations of interstitial oxygen solutes,and analyzed their effects on the evolution of radiation-induced defects during He irradiation at 673 K to 873 K,with a fluence of 5×10^(16) ions/cm^(2) and a peak dose of approximately 1 DPA.Using first-principles calculations and atomic-scale analysis of microstructures and chemical elements,we discovered that interstitial oxygen atoms enhance LCO and increase local lattice distortion.These heterogeneities increase the formation energy,and localize the diffusion,of vacancies,hence effectively reducing the transport of aggregating helium that causes bubble swelling.The initiation and growth of dislocation loops and precipitates are depressed as well.The manipulation of irradiation defects in BCC MPEAs,through orchestrating interstitial oxygen solutes and the LCO they provoke,adds a practical strategy for designing advanced alloys for nuclear applications.展开更多
The oxygen reduction reaction(ORR)could be effectively regulated by adjusting electron configurations and optimizing chemical bonds.Herein,we have achieved the modulation of electron distribution in Fe single atomic(F...The oxygen reduction reaction(ORR)could be effectively regulated by adjusting electron configurations and optimizing chemical bonds.Herein,we have achieved the modulation of electron distribution in Fe single atomic(Fe_(SA))sites through Fe atomic clusters(Fe_(AC))via a confined pyrolysis approach,thereby enhancing their intrinsic ORR activity.X-ray absorption spectroscopy has confirmed that the presence of iron atomic dusters could influence the electron distribution at Fe-N_(4)sites.The Fe_(SA)/Fe_(AC)-NC catalyst exhibits a half-wave potential of 0.88 V,surpassing the individual Fe_(SA)-NC structure.Through electronic structure analysis,it could be seen that iron atom clusters can affect Fe-N_(4)sites through long-range effects,and then effectively lower reaction barriers and enhance the reaction kinetics at Fe-N_(4)sites.The synthetic approach might pave the way for constructing highly active catalysts with tunable atomic structures,representing an effective and universal technique for electron modulation in M-N-C systems.This work provides enlightenment for the exploration of more efficient single-atom electrocatalysts and the optimization of the performance of atomic electrocatalysts.Furthermore,a zinc-air battery assembled using it on their cathode deliver a high peak power density(205.7 mW cm^(-2))and a high-specific capacity of 807.5 mA h g^(-1).This study offers a fresh approach to effectively enhance the synergistic interaction of between Fe single atom and Fe atomic clusters for improving ORR activity and energy storage.展开更多
The development of single atom catalysts(SACs)with asymmetric active sites by defect regulation provides an encourage potential for oxygen reduction reaction(ORR)and hydrogen evolution reaction(HER),but highly challen...The development of single atom catalysts(SACs)with asymmetric active sites by defect regulation provides an encourage potential for oxygen reduction reaction(ORR)and hydrogen evolution reaction(HER),but highly challenging.Herein,N-doped carbon(N-C)anchored atomically dispersed Ni-N_(3)site with proximity defects(Ni-N_(3)D)induced by Te atoms doping is reported.Benefitting from the inductive effect of proximity defect,the Ni-N_(3)D/Te-N-C catalyst performs excellent ORR and HER performance in alkaline and acid condition.Both in situ characterization and theoretical calculation reveal that the existence of proximity defect effect is conducive to lower rate-determining-step energy barrier of ORR and HER,thus accelerating the multielectron reaction kinetics.This work paves a novel strategy for constructing highactivity bifunctional SACs by defect engineering for development of sustainable energy.展开更多
Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyim- ide （PI） materials in atomic oxygen （AO） environment, and their mass loss, surface morphol...Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyim- ide （PI） materials in atomic oxygen （AO） environment, and their mass loss, surface morphology and surface chemical composi- tions have been examined by scanning electron microscope （SEM） and X-ray photoelectron spectroscopy （XPS） after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples＇ surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the re- action rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.展开更多
Transparent conductive oxide （TCO） thin film is a kind of functional material which has potential applications in solar cells and atomic oxygen （AO） resisting systems in spacecrafts. Of TCO, ZnO：Al （ZAO） and In...Transparent conductive oxide （TCO） thin film is a kind of functional material which has potential applications in solar cells and atomic oxygen （AO） resisting systems in spacecrafts. Of TCO, ZnO：Al （ZAO） and In2O3：Sn （ITO） thin films have been widely used and investigated. In this study, ZAO and ITO thin films were irradiated by AO with different amounts of fluence. The as-deposited samples and irradiated ones were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and Hall-effect measurement to investigate the dependence of the structure, morphology and electrical properties of ZAO or ITO on the amount of fluence of AO irradiation. It is noticed that AO has erosion effects on the surface of ZAO without evident influences upon its structure and conductive properties. Moreover, as the amount of AO fluence rises, the carrier concentration of ITO decreases causing the resistivity to increase by at most 21.7%.展开更多
In order to study the atomic oxygen corrosion of spacecraft materials in low earth orbit environment, an atomic oxygen simulator was established. In the simulator, a 2.45 GHz microwave source with maximum power of 600...In order to study the atomic oxygen corrosion of spacecraft materials in low earth orbit environment, an atomic oxygen simulator was established. In the simulator, a 2.45 GHz microwave source with maximum power of 600 W was launched into the circular cavity to generate ECR (electron cyclotron resonance) plasma. The oxygen ion beam moved onto a negatively biased Mo plate under the condition of symmetry magnetic mirror field confine, then was neutralized and reflected to form oxygen atom beam. The properties of plasma density, electron temperature, plasma space potential and ion incident energy were characterized. The atomic oxygen beam flux was calibrated by measuring the mass loss rate of Kapton during the atomic oxygen exposure. The test results show that the atomic oxygen beam with flux of 1016-1017 atoms-cm-2·s-1 and energy of 5-30 eV and a cross section of φ80 mm could be obtained under the operating pressure of 10-1-10-3 Pa. Such a high flux source can provide accelerated simulation tests of materials and coatings for space applications.展开更多
Polytetrafluoroethylene (Teflon), a widely used spacecraft material, isstudied to investigate the vacuum ultraviolet (VUV) effects and its synergistic effects with atomicoxygen (AO) in a ground-based simulation facili...Polytetrafluoroethylene (Teflon), a widely used spacecraft material, isstudied to investigate the vacuum ultraviolet (VUV) effects and its synergistic effects with atomicoxygen (AO) in a ground-based simulation facility. The samples before and after the experiments arecompared in appearance, mass, optical properties and surface composition. The reactioncharacteristics of Teflon are summarized and the reaction mechanisms are analyzed. The followingconclusion can be drawn: at the action of VUV the Teflon sample surface is darkened for theaccumulation of carbon; and when the sample is exposed to AO, the carbon is oxidized and thedarkening surface is bleached; the synergistic effects of VUV and AO may cause the erosion of Teflonmore severe.展开更多
Due to outstanding mechanical properties, heat resistance, and relatively facile production,nanoclay reinforced epoxy composites(NCRE composites) have been suggested as candidate materials for use on external surfaces...Due to outstanding mechanical properties, heat resistance, and relatively facile production,nanoclay reinforced epoxy composites(NCRE composites) have been suggested as candidate materials for use on external surfaces of spacecraft residing in the low Earth orbit(LEO) environment. The resistance of the NCRE composites to bombardment by atomic oxygen(AO), a dominant component of the LEO environment, has been investigated. Four types of samples were used in this study. They were pure epoxy(0 wt% nanoclay content), and NCRE composites with different loadings of nanoclay—1 wt%, 2 wt%, and 4 wt%. Etch depths decreased with increasing nanoclay content, and for the 4 wt% samples it ranged from 28% to 37% compared to that of pure epoxy. X-ray photoelectron spectroscopy(XPS) indicates that after AO bombardment, relative area of C-C/C-H peak decreased,while the area of the C-O, ketones peaks increased, and the oxidation degree of surfaces increased. New carbon-related component carbonates were detected on nanoclay containing composite surfaces. Scanning electron microscopy indicates that aggregates formed on nanoclay-containing surfaces after AO bombardment. The sizes and densities of aggregates increased with nanoclay content. The combined erosion depths, XPS and SEM results indicate that although all the studied surfaces got eroded and oxidized after AO bombardment,the nanoclay containing composites showed better AO resistance compared to pure epoxy,because the produced aggregates on surface potentially act as a physical "shield", effectively retarding parts of the surface from further AO etching.展开更多
The erosion behavior of Kapton when exposed to atomic oxygen (AO) environment in the ground-based simulation facility was studied. The chemical and physical changes of sample surfaces after exposed to AO fluxes were i...The erosion behavior of Kapton when exposed to atomic oxygen (AO) environment in the ground-based simulation facility was studied. The chemical and physical changes of sample surfaces after exposed to AO fluxes were investigated by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results indicated that Kapton underwent dramatically degradation, including much mass loss and change of surface morphologies; vacuum outgassing effect of Kapton was the key factor for initial mass loss in the course of atomic oxygen beam exposures. XPS analysis showed that the carbonyl group in Kapton reacted with oxygen atoms to generate CO2, then CO2 desorbed from Kapton surface. In addition, PMDA in the polyimide structure degraded due to the reaction with atomic oxygen of 5 eV.展开更多
Understanding carbon-supported Pt-catalyzed oxygen reduction reaction(ORR)from the perspective of the active sites is of fundamental and practical importance.In this study,three differently sized carbon nanotube-suppo...Understanding carbon-supported Pt-catalyzed oxygen reduction reaction(ORR)from the perspective of the active sites is of fundamental and practical importance.In this study,three differently sized carbon nanotube-supported Pt nanoparticles(Pt/CNT)are prepared by both atomic layer deposition(ALD)and impregnation methods.The performances of the catalysts toward the ORR in acidic media are comparatively studied to probe the effects of the sizes of the Pt nanoparticles together with their distributions,electronic properties,and local environments.The ALD-Pt/CNT catalysts show much higher ORR activity and selectivity than the impregnation-Pt/CNT catalysts.This outstanding ORR performance is ascribed to the well-controlled Pt particle sizes and distributions,desirable Pt^04f binding energy,and the Cl-free Pt surfaces based on the electrocatalytic measurements,catalyst characterizations,and model calculations.The insights reported here could guide the rational design and fine-tuning of carbon-supported Pt catalysts for the ORR.展开更多
Rechargeable zinc-air batteries(ZABs)are currently receiving extensive attention because of their extremely high theoretical specific energy density,low manufacturing costs,and environmental friendliness.Exploring bif...Rechargeable zinc-air batteries(ZABs)are currently receiving extensive attention because of their extremely high theoretical specific energy density,low manufacturing costs,and environmental friendliness.Exploring bifunctional catalysts with high activity and stability to overcome sluggish kinetics of oxygen reduction reaction and oxygen evolution reaction is critical for the development of rechargeable ZABs.Atomically dispersed metal-nitrogen-carbon(M-N-C)catalysts possessing prominent advantages of high metal atom utilization and electrocatalytic activity are promising candidates to promote oxygen electrocatalysis.In this work,general principles for designing atomically dispersed M-N-C are reviewed.Then,strategies aiming at enhancing the bifunctional catalytic activity and stability are presented.Finally,the challenges and perspectives of M-N-C bifunctional oxygen catalysts for ZABs are outlined.It is expected that this review will provide insights into the targeted optimization of atomically dispersed M-N-C catalysts in rechargeable ZABs.展开更多
Atomic oxygen （AO） found in low earth orbit can cause serious erosion to polyimide （PI） materials, which greatly limits their lifetime. 8-phenyl silsesquioxane （OPPOSS） was synthesized, and OPPOSS/PI composites ...Atomic oxygen （AO） found in low earth orbit can cause serious erosion to polyimide （PI） materials, which greatly limits their lifetime. 8-phenyl silsesquioxane （OPPOSS） was synthesized, and OPPOSS/PI composites were pre- pared by physical blending, followed by thermal imidization to enhance the AO erosion resistance of PI materials. The morphology, composition, and structure of the composites were analyzed before and after AO exposure in a ground sim- ulated facility of atomic oxygen. After 16 h AO exposure, the OPPOSS/PI composite with 5wt% OPPOSS addition shows an erosion rate of about 1.4×10-24 cm3/atom with only 48% mass loss of that of PI without OPPOSS addition. The mixture of OPPOSS nano molecules is assembled into a kind of regular square structure and distributed evenly in OPPOSS/PI composites. Some SiO2 particles are formed in the composites during AO exposure, which can act as ＂inert points＂ to reduce the AO erosion rate of OPPOSS/PI composites.展开更多
Silver foils and ion-implanted silver foils exposed to atomic oxygen （AO） generated in a ground simulation facility were investigated by the quartz crystal microbalance （QCM）, the scanning electron microscopy （SE...Silver foils and ion-implanted silver foils exposed to atomic oxygen （AO） generated in a ground simulation facility were investigated by the quartz crystal microbalance （QCM）, the scanning electron microscopy （SEM） and the X-ray photoelectron spectroscopy （XPS）. The experimental results show the presence of Ag2O and AgO in an oxidation process of the silver foil having exposure to AO. As soon as silver comes under the bombardment of atomic oxygen, the oxidation process starts with a thick film forming on the silver surface. Because of the development of stresses, the oxide layer gets cracked and spalled, which leads to appearance of a new silver surface intensifying further oxidation. At last, AgO begins to form on the outer surface of the oxide film. The analytical results of the XPS and the AES attest to formation of a continuous high-quality protective oxide-based layer on the surface of ion-implanted silver films after exposure to AO. This layer can well protect materials in question from erosion.展开更多
Atomically dispersed catalysts exhibit significant influence on facilitating the sluggish oxygen reduction reaction(ORR)kinetics with high atom economy,owing to remarkable attributes including nearly 100%atomic utiliz...Atomically dispersed catalysts exhibit significant influence on facilitating the sluggish oxygen reduction reaction(ORR)kinetics with high atom economy,owing to remarkable attributes including nearly 100%atomic utilization and exceptional catalytic functionality.Furthermore,accurately controlling atomic physical properties including spin,charge,orbital,and lattice degrees of atomically dispersed catalysts can realize the optimized chemical properties including maximum atom utilization efficiency,homogenous active centers,and satisfactory catalytic performance,but remains elusive.Here,through physical and chemical insight,we review and systematically summarize the strategies to optimize atomically dispersed ORR catalysts including adjusting the atomic coordination environment,adjacent electronic orbital and site density,and the choice of dual-atom sites.Then the emphasis is on the fundamental understanding of the correlation between the physical property and the catalytic behavior for atomically dispersed catalysts.Finally,an overview of the existing challenges and prospects to illustrate the current obstacles and potential opportunities for the advancement of atomically dispersed catalysts in the realm of electrocatalytic reactions is offered.展开更多
Lithium-rich oxide compounds have been recognized as promising cathode materials for high performance Li-ion batteries,owing to their high specific capacity.However,it remains a great challenge to achieve the fully re...Lithium-rich oxide compounds have been recognized as promising cathode materials for high performance Li-ion batteries,owing to their high specific capacity.However,it remains a great challenge to achieve the fully reversible anionic redox reactions to realize high capacity,high stability,and low voltage hysteresis for lithiumrich cathode materials.Therefore,it is critically important to comprehensively understand and control the anionic redox chemistry of lithium-rich cathode materials,including atomic structure design,and nano-scale materials engineering technologies.Herein,we summarize the recent research progress of lithium-rich cathode materials with a focus on redox chemistry.Particularly,we highlight the oxygen-based redox reactions in lithium-rich metal oxides,with critical views of designing next generation oxygen redox lithium cathode materials.Furthermore,we purposed the most promising strategies for improving the performances of lithium-rich cathode materials with a technology-spectrum from the atomic scale to nano-scale.展开更多
Exploring platinum group metal-free electrocatalysts with superior catalytic performance and favorable durability for oxygen reduction reaction is a remaining bottleneck in process of developing sustainable techniques...Exploring platinum group metal-free electrocatalysts with superior catalytic performance and favorable durability for oxygen reduction reaction is a remaining bottleneck in process of developing sustainable techniques in energy storage and conversion. Herein, a hierarchical porous single atomic Fe electrocatalyst(Fe/Z8-E-C) is rationally designed and synthesized via acid etching, calcination, adsorption of Fe precursor and recalcination processes. This unique electrocatalyst Fe/Z8-E-C shows excellent oxygen reduction performance with a half-wave potential of 0.89 V in 0.1 mol/L KOH, 30 m V superior to that of commercial Pt/C(0.86 V), which is also significantly higher than that of typical Fe-doped ZIF-8 derived carbon nanoparticles(Fe/Z8-C) with a half-wave potential of 0.84 V. Furthermore, Fe/Z8-E-C-based Zn-air battery exhibits greatly enhanced peak power density and specific capacity than those of original Fe/Z8-C,verifying the remarkable performance and practicability of this specially designed hierarchical structure due to its efficient utilization of the active sites and rapid mass transfer. This present work proposes a new method to rationally synthesize single atom electrocatalysts loaded on hierarchical porous frame materials for catalysis and energy conversion.展开更多
基金supported by National Natural Science Foundation of China(No.523B2070,No.52225606).
文摘Polymeric perylene diimide(PDI)has been evidenced as a good candidate for photocatalytic water oxidation,yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration.Herein,with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern,the electronic structure is theoretically illustrated by the first-principles density functional theory calculations,suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI.It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal orbital Hamiltonian group analysis.The calculations of reaction free energy changes indicate that the oxygen evolution reaction should follow the reaction pathway of H_(2)O→^(*)OH→^(*)O→^(*)OOH→^(*)O_(2)with an overpotential of 0.81 V.Through an in-depth theoretical computational analysis in the atomic and electronic structures,the origin of photocatalytic oxygen evolution activity for PDI is well illustrated,which would help the rational design and modification of polymeric photocatalysts for efficient oxygen evolution.
基金financially supported by the National Natural Science Foundation of China(No.22278042)the National Natural Science Foundation of Jiangsu Province(No.BK20240567)+2 种基金the Introduction and Cultivation of Leading Innovative Talents Foundation of Changzhou,Jiangsu Province(No.CQ20220093)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(No.24KJD530001)the Open Project Program of Key Laboratory of Optic-electric Sensing and Analytical Chemistry for Life Science(No.M2024-7),MOE
文摘Regulating the electronic structure and oxygencontaining intermediates adsorption behavior on Fe-based catalysts is of great significance to cope with the sluggish oxygen reduction reaction(ORR)kinetics,but it still remains a great challenge.In this work,Fe atom clusters(Fe_(AC))modified by high-density Cu single atoms(Cu_(SA))in a N,S-doped porous carbon substrate(Fe_(AC)/Cu_(SA)@NCS)is reported for enhanced ORR electrocatalysis.Fe_(AC)/Cu_(SA)@NCS exhibits excellent ORR performance with a half-wave potential(E_(1/2))of 0.911 V,a high four-electron process selectivity and excellent stability.The ORR performance is also verified in the Fe_(AC)/Cu_(SA)@NCS-based Zn-air battery,which shows a high peak power density of 192.67 mW cm^(-2),a higher specific capacity of 808.3 mAh g^(-1)and impressive charge-discharge cycle stability.Moreover,density functional theory calculations show that Cu single atoms synergistically modulate the electronic structure Fe active atoms in Fe atomic clusters,reducing the energy barrier of the rate-determining step(i.e.,*OH desorption)on Fe_(AC)/Cu_(SA)@NCS.This work provides an effective way to regulate the electronic structure of Fe-based catalysts and optimize their electrocatalytic activity based on the introduction of a second metal source.
基金supported by the Fujian Science and Technology Innovation Laboratory for Optoelectronic Information of China(No.2021ZR124)。
文摘Heteroatom doping is a promising strategy for designing cost-effective and stable electrocatalysts toward the oxygen evolution reaction(OER),but the enhancement mechanism remains unclear.Herein,atomic Ir-O-Cu and Ir-O-Ir motifs are engineered into CuO nanowires via cation exchange and dehydration to elucidate the OER mechanism.Systematic characterizations confirm the atomic dispersion of Ir within the CuO lattice and the electron transfer from Ir to CuO while preserving the host structure.The asprepared single-atom Ir-doped CuO(IrSA-CuO),featuring predominant Cu-O-Ir motifs and coexisting IrO-Ir motifs,achieves a low OER overpotential of 204 mV at 10 mA cm^(-2)in 1 M KOH,coupled with a 69-fold higher mass activity than commercial IrO_(2).Furthermore,the Ir_(SA)-CuO maintains long-term stability for 300 h at 200 mA cm^(-2)with minimal overpotential alteration and an additional 120 h at500 mA cm^(-2)with overpotential increased by 15 mV.In situ Raman spectroscopy reveals that the Ir-O-Ir motifs suppress Cu^(Ⅱ) oxidation to Cu^(Ⅲ) by delaying the onset potential,enhancing the structural stability during OER.Density functional theory calculations demonstrate the Cu-O-Ir motifs lower the adsorption energy of bridged ^(*)O via asymmetric bonding,accelerating ^(*)OOH formation in the ratedetermining step.This work presents a heteroatom engineering strategy to balance electrocatalytic activity and durability,providing a blueprint for industrial electrocatalyst design.
基金supported by the National Natural Science Foundation of China(No.21875039)the Project on the Integration of Industry-Education-Research of Fujian Province(No.2021H6020)the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing(Wuhan University of Technology).
文摘The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt@Pt_(3)Ti core-shell nanoparticles with atomic-controllable shells through precise thermal diffusing Ti into Pt nanoparticles for effective and durable ORR.Combining theoretical and experiment analysis,we found that the lattice strain of Pt_(3)Ti shells can be tailored by precisely controlling the thick-ness of Pt_(3)Ti shell in atomic-scale on account of the lattice constant difference between Pt and Pt_(3)Ti to optimize adsorption properties of Pt_(3)Ti for ORR intermediates,thus enhancing its performance.The Pt@Pt_(3)Ti catalyst with one-atomic Pt_(3)Ti shell(Pt@1L-Pt_(3)Ti/TiO_(2)-C)demonstrates excellent performance with mass activity of 592 mA mgpt-1 and durability nearly 19.5-fold that of commercial Pt/C with negligible decay(2%)after 30,000 potential cycles(0.6-1.0 V vs.RHE).Notably,at higher potential cycles(1.0 V-1.5 V vs.RHE),Pt@1L-Pt_(3)Ti/TiO_(2)-C also showed far superior durability than Pt/C(9.6%decayed while 54.8% for commercial Pt/C).This excellent stability is derived from the intrinsic stability of Pt_(3)Ti alloy and the confinement effect of TiO_(2)-C.The catalyst's enhancement was further confirmed in PEMFC configuration.
基金financially supported by the National Key Research and Development Program of China(No.2019YFA0209900)the National Natural Science Foundation of China(Nos.12305290,12075179,52231001,and 12105219)+1 种基金the Postdoctoral Fellowship Program of CPSF(No.GZC20232089)the Innovative Scientific Program of China National Nuclear Corporation,and the Fundamental Research Funds for the Central Universities.
文摘Designing alloys capable of withstanding irradiation is a crucial aspect of developing materials for nuclear reactors and aerospace applications.Local chemical order(LCO)has recently been recognized as a new microstructural parameter to leverage,and its effect on the mechanical properties of body-centered cubic(BCC)multi-principal element alloys(MPEAs)has attracted much attention.However,the impact of LCO on the dynamic evolution of irradiation-induced defects in BCC MPEAs remains much less explored.In this study,we engineered varying degrees of LCO and local lattice distortion in NbZrTi BCC MPEAs by alloying them with different concentrations of interstitial oxygen solutes,and analyzed their effects on the evolution of radiation-induced defects during He irradiation at 673 K to 873 K,with a fluence of 5×10^(16) ions/cm^(2) and a peak dose of approximately 1 DPA.Using first-principles calculations and atomic-scale analysis of microstructures and chemical elements,we discovered that interstitial oxygen atoms enhance LCO and increase local lattice distortion.These heterogeneities increase the formation energy,and localize the diffusion,of vacancies,hence effectively reducing the transport of aggregating helium that causes bubble swelling.The initiation and growth of dislocation loops and precipitates are depressed as well.The manipulation of irradiation defects in BCC MPEAs,through orchestrating interstitial oxygen solutes and the LCO they provoke,adds a practical strategy for designing advanced alloys for nuclear applications.
基金supported by the National Natural Science Foundations of China(Nos:22271018,22309012 and 22302013)the NSF of Guangdong Province(Nos:2023A1515010554 and 2024A1515010307)。
文摘The oxygen reduction reaction(ORR)could be effectively regulated by adjusting electron configurations and optimizing chemical bonds.Herein,we have achieved the modulation of electron distribution in Fe single atomic(Fe_(SA))sites through Fe atomic clusters(Fe_(AC))via a confined pyrolysis approach,thereby enhancing their intrinsic ORR activity.X-ray absorption spectroscopy has confirmed that the presence of iron atomic dusters could influence the electron distribution at Fe-N_(4)sites.The Fe_(SA)/Fe_(AC)-NC catalyst exhibits a half-wave potential of 0.88 V,surpassing the individual Fe_(SA)-NC structure.Through electronic structure analysis,it could be seen that iron atom clusters can affect Fe-N_(4)sites through long-range effects,and then effectively lower reaction barriers and enhance the reaction kinetics at Fe-N_(4)sites.The synthetic approach might pave the way for constructing highly active catalysts with tunable atomic structures,representing an effective and universal technique for electron modulation in M-N-C systems.This work provides enlightenment for the exploration of more efficient single-atom electrocatalysts and the optimization of the performance of atomic electrocatalysts.Furthermore,a zinc-air battery assembled using it on their cathode deliver a high peak power density(205.7 mW cm^(-2))and a high-specific capacity of 807.5 mA h g^(-1).This study offers a fresh approach to effectively enhance the synergistic interaction of between Fe single atom and Fe atomic clusters for improving ORR activity and energy storage.
基金financially supported by the National Natural Science Foundation of China(22478432,22108306,22178388)Taishan Scholars Program of Shandong Province(tsqn201909065)+2 种基金Shandong Provincial Natural Science Foundation(ZR2024JQ004)Innovation Fund Project for Graduate Student of China University of Petroleum(East China)the Fundamental Research Funds for the Central Universities(No.25CX04020A)。
文摘The development of single atom catalysts(SACs)with asymmetric active sites by defect regulation provides an encourage potential for oxygen reduction reaction(ORR)and hydrogen evolution reaction(HER),but highly challenging.Herein,N-doped carbon(N-C)anchored atomically dispersed Ni-N_(3)site with proximity defects(Ni-N_(3)D)induced by Te atoms doping is reported.Benefitting from the inductive effect of proximity defect,the Ni-N_(3)D/Te-N-C catalyst performs excellent ORR and HER performance in alkaline and acid condition.Both in situ characterization and theoretical calculation reveal that the existence of proximity defect effect is conducive to lower rate-determining-step energy barrier of ORR and HER,thus accelerating the multielectron reaction kinetics.This work paves a novel strategy for constructing highactivity bifunctional SACs by defect engineering for development of sustainable energy.
基金Aerospace Science and Technology Innovation Fund (CASC0505)
文摘Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyim- ide （PI） materials in atomic oxygen （AO） environment, and their mass loss, surface morphology and surface chemical composi- tions have been examined by scanning electron microscope （SEM） and X-ray photoelectron spectroscopy （XPS） after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples＇ surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the re- action rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.
基金National Natural Science Foundation of China (50471004)
文摘Transparent conductive oxide （TCO） thin film is a kind of functional material which has potential applications in solar cells and atomic oxygen （AO） resisting systems in spacecrafts. Of TCO, ZnO：Al （ZAO） and In2O3：Sn （ITO） thin films have been widely used and investigated. In this study, ZAO and ITO thin films were irradiated by AO with different amounts of fluence. The as-deposited samples and irradiated ones were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and Hall-effect measurement to investigate the dependence of the structure, morphology and electrical properties of ZAO or ITO on the amount of fluence of AO irradiation. It is noticed that AO has erosion effects on the surface of ZAO without evident influences upon its structure and conductive properties. Moreover, as the amount of AO fluence rises, the carrier concentration of ITO decreases causing the resistivity to increase by at most 21.7%.
基金This work was supported by the National Key Basic Research and.Development Program of China(No.G19990650).
文摘In order to study the atomic oxygen corrosion of spacecraft materials in low earth orbit environment, an atomic oxygen simulator was established. In the simulator, a 2.45 GHz microwave source with maximum power of 600 W was launched into the circular cavity to generate ECR (electron cyclotron resonance) plasma. The oxygen ion beam moved onto a negatively biased Mo plate under the condition of symmetry magnetic mirror field confine, then was neutralized and reflected to form oxygen atom beam. The properties of plasma density, electron temperature, plasma space potential and ion incident energy were characterized. The atomic oxygen beam flux was calibrated by measuring the mass loss rate of Kapton during the atomic oxygen exposure. The test results show that the atomic oxygen beam with flux of 1016-1017 atoms-cm-2·s-1 and energy of 5-30 eV and a cross section of φ80 mm could be obtained under the operating pressure of 10-1-10-3 Pa. Such a high flux source can provide accelerated simulation tests of materials and coatings for space applications.
文摘Polytetrafluoroethylene (Teflon), a widely used spacecraft material, isstudied to investigate the vacuum ultraviolet (VUV) effects and its synergistic effects with atomicoxygen (AO) in a ground-based simulation facility. The samples before and after the experiments arecompared in appearance, mass, optical properties and surface composition. The reactioncharacteristics of Teflon are summarized and the reaction mechanisms are analyzed. The followingconclusion can be drawn: at the action of VUV the Teflon sample surface is darkened for theaccumulation of carbon; and when the sample is exposed to AO, the carbon is oxidized and thedarkening surface is bleached; the synergistic effects of VUV and AO may cause the erosion of Teflonmore severe.
基金the National Natu- ral Science Foundation of China (No.21473015 and No.41574101)the Fundamental Research Funds for the Central Universities (No.3132018233).
文摘Due to outstanding mechanical properties, heat resistance, and relatively facile production,nanoclay reinforced epoxy composites(NCRE composites) have been suggested as candidate materials for use on external surfaces of spacecraft residing in the low Earth orbit(LEO) environment. The resistance of the NCRE composites to bombardment by atomic oxygen(AO), a dominant component of the LEO environment, has been investigated. Four types of samples were used in this study. They were pure epoxy(0 wt% nanoclay content), and NCRE composites with different loadings of nanoclay—1 wt%, 2 wt%, and 4 wt%. Etch depths decreased with increasing nanoclay content, and for the 4 wt% samples it ranged from 28% to 37% compared to that of pure epoxy. X-ray photoelectron spectroscopy(XPS) indicates that after AO bombardment, relative area of C-C/C-H peak decreased,while the area of the C-O, ketones peaks increased, and the oxidation degree of surfaces increased. New carbon-related component carbonates were detected on nanoclay containing composite surfaces. Scanning electron microscopy indicates that aggregates formed on nanoclay-containing surfaces after AO bombardment. The sizes and densities of aggregates increased with nanoclay content. The combined erosion depths, XPS and SEM results indicate that although all the studied surfaces got eroded and oxidized after AO bombardment,the nanoclay containing composites showed better AO resistance compared to pure epoxy,because the produced aggregates on surface potentially act as a physical "shield", effectively retarding parts of the surface from further AO etching.
文摘The erosion behavior of Kapton when exposed to atomic oxygen (AO) environment in the ground-based simulation facility was studied. The chemical and physical changes of sample surfaces after exposed to AO fluxes were investigated by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results indicated that Kapton underwent dramatically degradation, including much mass loss and change of surface morphologies; vacuum outgassing effect of Kapton was the key factor for initial mass loss in the course of atomic oxygen beam exposures. XPS analysis showed that the carbonyl group in Kapton reacted with oxygen atoms to generate CO2, then CO2 desorbed from Kapton surface. In addition, PMDA in the polyimide structure degraded due to the reaction with atomic oxygen of 5 eV.
基金financially supported by the Natural Science Foundation of China(21922803 and 21776077)the Shanghai Natural Science Foundation(17ZR1407300 and 17ZR1407500)+3 种基金the Program for the Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learningthe Shanghai Rising-Star Program(17QA1401200)the State Key Laboratory of Organic-Inorganic Composites(oic-201801007)the Open Project of State Key Laboratory of Chemical Engineering(SKLChe-15C03)。
文摘Understanding carbon-supported Pt-catalyzed oxygen reduction reaction(ORR)from the perspective of the active sites is of fundamental and practical importance.In this study,three differently sized carbon nanotube-supported Pt nanoparticles(Pt/CNT)are prepared by both atomic layer deposition(ALD)and impregnation methods.The performances of the catalysts toward the ORR in acidic media are comparatively studied to probe the effects of the sizes of the Pt nanoparticles together with their distributions,electronic properties,and local environments.The ALD-Pt/CNT catalysts show much higher ORR activity and selectivity than the impregnation-Pt/CNT catalysts.This outstanding ORR performance is ascribed to the well-controlled Pt particle sizes and distributions,desirable Pt^04f binding energy,and the Cl-free Pt surfaces based on the electrocatalytic measurements,catalyst characterizations,and model calculations.The insights reported here could guide the rational design and fine-tuning of carbon-supported Pt catalysts for the ORR.
基金This work is supported by the Natural Sciences and Engineering Research Council of Canada(NSERC)Centre Québéco is sur les Materiaux Fonctionnels(CQMF),Fonds de Recherche du Québec-Nature et Technologies(FRQNT)+2 种基金Institut National de la Recherche Scientifique(INRS)This work is also supported by the National Natural Science Foundation of China(21972017)the“Scientific and Technical Innovation Action Plan”Hong Kong,Macao and Taiwan Science&Technology Cooperation Project of Shanghai Science and Technology Committee(19160760600).F.Dong gratefully acknowledges scholarships from the China Scholarship Council(CSC).
文摘Rechargeable zinc-air batteries(ZABs)are currently receiving extensive attention because of their extremely high theoretical specific energy density,low manufacturing costs,and environmental friendliness.Exploring bifunctional catalysts with high activity and stability to overcome sluggish kinetics of oxygen reduction reaction and oxygen evolution reaction is critical for the development of rechargeable ZABs.Atomically dispersed metal-nitrogen-carbon(M-N-C)catalysts possessing prominent advantages of high metal atom utilization and electrocatalytic activity are promising candidates to promote oxygen electrocatalysis.In this work,general principles for designing atomically dispersed M-N-C are reviewed.Then,strategies aiming at enhancing the bifunctional catalytic activity and stability are presented.Finally,the challenges and perspectives of M-N-C bifunctional oxygen catalysts for ZABs are outlined.It is expected that this review will provide insights into the targeted optimization of atomically dispersed M-N-C catalysts in rechargeable ZABs.
基金fnancially supported by the National Natural Science Foundation of China(No.51206009)
文摘Atomic oxygen （AO） found in low earth orbit can cause serious erosion to polyimide （PI） materials, which greatly limits their lifetime. 8-phenyl silsesquioxane （OPPOSS） was synthesized, and OPPOSS/PI composites were pre- pared by physical blending, followed by thermal imidization to enhance the AO erosion resistance of PI materials. The morphology, composition, and structure of the composites were analyzed before and after AO exposure in a ground sim- ulated facility of atomic oxygen. After 16 h AO exposure, the OPPOSS/PI composite with 5wt% OPPOSS addition shows an erosion rate of about 1.4×10-24 cm3/atom with only 48% mass loss of that of PI without OPPOSS addition. The mixture of OPPOSS nano molecules is assembled into a kind of regular square structure and distributed evenly in OPPOSS/PI composites. Some SiO2 particles are formed in the composites during AO exposure, which can act as ＂inert points＂ to reduce the AO erosion rate of OPPOSS/PI composites.
基金Natural Science Foundation of JX Province (0650035)
文摘Silver foils and ion-implanted silver foils exposed to atomic oxygen （AO） generated in a ground simulation facility were investigated by the quartz crystal microbalance （QCM）, the scanning electron microscopy （SEM） and the X-ray photoelectron spectroscopy （XPS）. The experimental results show the presence of Ag2O and AgO in an oxidation process of the silver foil having exposure to AO. As soon as silver comes under the bombardment of atomic oxygen, the oxidation process starts with a thick film forming on the silver surface. Because of the development of stresses, the oxide layer gets cracked and spalled, which leads to appearance of a new silver surface intensifying further oxidation. At last, AgO begins to form on the outer surface of the oxide film. The analytical results of the XPS and the AES attest to formation of a continuous high-quality protective oxide-based layer on the surface of ion-implanted silver films after exposure to AO. This layer can well protect materials in question from erosion.
基金supported by the National Natural Science Foundation of China(22234005,21974070)the Natural Science Foundation of Jiangsu Province(BK20222015)。
文摘Atomically dispersed catalysts exhibit significant influence on facilitating the sluggish oxygen reduction reaction(ORR)kinetics with high atom economy,owing to remarkable attributes including nearly 100%atomic utilization and exceptional catalytic functionality.Furthermore,accurately controlling atomic physical properties including spin,charge,orbital,and lattice degrees of atomically dispersed catalysts can realize the optimized chemical properties including maximum atom utilization efficiency,homogenous active centers,and satisfactory catalytic performance,but remains elusive.Here,through physical and chemical insight,we review and systematically summarize the strategies to optimize atomically dispersed ORR catalysts including adjusting the atomic coordination environment,adjacent electronic orbital and site density,and the choice of dual-atom sites.Then the emphasis is on the fundamental understanding of the correlation between the physical property and the catalytic behavior for atomically dispersed catalysts.Finally,an overview of the existing challenges and prospects to illustrate the current obstacles and potential opportunities for the advancement of atomically dispersed catalysts in the realm of electrocatalytic reactions is offered.
基金financial support by the Australian Research Council(ARC)Discovery Project(DP200101249)。
文摘Lithium-rich oxide compounds have been recognized as promising cathode materials for high performance Li-ion batteries,owing to their high specific capacity.However,it remains a great challenge to achieve the fully reversible anionic redox reactions to realize high capacity,high stability,and low voltage hysteresis for lithiumrich cathode materials.Therefore,it is critically important to comprehensively understand and control the anionic redox chemistry of lithium-rich cathode materials,including atomic structure design,and nano-scale materials engineering technologies.Herein,we summarize the recent research progress of lithium-rich cathode materials with a focus on redox chemistry.Particularly,we highlight the oxygen-based redox reactions in lithium-rich metal oxides,with critical views of designing next generation oxygen redox lithium cathode materials.Furthermore,we purposed the most promising strategies for improving the performances of lithium-rich cathode materials with a technology-spectrum from the atomic scale to nano-scale.
基金supported by National Key R&D Program of China (No.2018YFA0108300)the Overseas High-level Talents Plan of China and Guangdong Province+3 种基金the Fundamental Research Funds for the Central Universitiesthe 100 Talents Plan Foundation of Sun Yat-sen Universitythe Program for Guangdong Introducing Innovative and Entrepreneurial Teams (No.2017ZT07C069)the Natinoal Natural Science Foundation of China (Nos.22075321,21821003,21890380 and 21905315)。
文摘Exploring platinum group metal-free electrocatalysts with superior catalytic performance and favorable durability for oxygen reduction reaction is a remaining bottleneck in process of developing sustainable techniques in energy storage and conversion. Herein, a hierarchical porous single atomic Fe electrocatalyst(Fe/Z8-E-C) is rationally designed and synthesized via acid etching, calcination, adsorption of Fe precursor and recalcination processes. This unique electrocatalyst Fe/Z8-E-C shows excellent oxygen reduction performance with a half-wave potential of 0.89 V in 0.1 mol/L KOH, 30 m V superior to that of commercial Pt/C(0.86 V), which is also significantly higher than that of typical Fe-doped ZIF-8 derived carbon nanoparticles(Fe/Z8-C) with a half-wave potential of 0.84 V. Furthermore, Fe/Z8-E-C-based Zn-air battery exhibits greatly enhanced peak power density and specific capacity than those of original Fe/Z8-C,verifying the remarkable performance and practicability of this specially designed hierarchical structure due to its efficient utilization of the active sites and rapid mass transfer. This present work proposes a new method to rationally synthesize single atom electrocatalysts loaded on hierarchical porous frame materials for catalysis and energy conversion.
