A brief review is given about the friction and wear properties of high temperature alloys. Above a critical temperature, if the oxide becomes ductile, it will flow over the surface and prevent metal-to-metat contact. ...A brief review is given about the friction and wear properties of high temperature alloys. Above a critical temperature, if the oxide becomes ductile, it will flow over the surface and prevent metal-to-metat contact. In order to study the tribology of oxide lubrication. a series of tests were carried out using Cu(ReO4)2 as a lubricant. The effects of time. Surface finish. substrates. load and temperature were investigated. A mechanism of lubrication is proposed in which the surface slip predominates along with mechanical attachment of oxide to the surface.展开更多
The addition Of Pb enhances the hightemperature stability as well as theproportion of the high Tphase in Bi-Sr-Ca-Cu-O superconductor.The sample A with nominal composi-tion of BiSrCaCuOwas synthesized bySolid state re...The addition Of Pb enhances the hightemperature stability as well as theproportion of the high Tphase in Bi-Sr-Ca-Cu-O superconductor.The sample A with nominal composi-tion of BiSrCaCuOwas synthesized bySolid state reaction.It was sintered in airat 1153K for 24h,followed by annealingat 773K for 24h and furnace-cooling.The sample B with a nominal compositionof BiPbSrCaCuOwas prepared bymixing PbO with the powder ofBiSrCaCuOwhich had been prefired at1113K for 24h,pressing,sintering at展开更多
Superior characteristics of Al Ga N-channel metal-insulator-semiconductor（MIS） high electron mobility transistors（HEMTs） at high temperatures are demonstrated in detail. The temperature coefficient of the maximum ...Superior characteristics of Al Ga N-channel metal-insulator-semiconductor（MIS） high electron mobility transistors（HEMTs） at high temperatures are demonstrated in detail. The temperature coefficient of the maximum saturation drain current for the Al GaN-channel MIS HEMT can be reduced by 50% compared with the Ga N-channel HEMT. Moreover, benefiting from the better suppression of gate current and reduced leakage current in the buffer layer, the Al Ga N-channel MIS HEMT demonstrates an average breakdown electric field of 1.83 MV/cm at25℃ and 1.06 MV/cm at 300℃, which is almost 2 times and 3 times respectively larger than that of the reference Ga N-channel HEMT. Pulsed mode analyses suggest that the proposed device suffers from smaller current collapse when the temperature reaches as high as 300℃.展开更多
We analyze the line data from solar flares to present evidence for the emission spectrum of the recently discussed electron-proton pairs at high temperatures. We also point out that since the pairing phenomenon provid...We analyze the line data from solar flares to present evidence for the emission spectrum of the recently discussed electron-proton pairs at high temperatures. We also point out that since the pairing phenomenon provides an additional source for these lines—the conventional source being the highly ionized high-Z atoms already existing in the solar atmosphere, we have a plausible explanation of the FIP effect.展开更多
Thermally regenerated low-reflectivity fiber Bragg gratings（RFBGs）, as one mirror of a resonant cavity, have been introduced as linear-cavity fiber lasers combining with fiber saturable absorbers. The output of lasi...Thermally regenerated low-reflectivity fiber Bragg gratings（RFBGs）, as one mirror of a resonant cavity, have been introduced as linear-cavity fiber lasers combining with fiber saturable absorbers. The output of lasing presents an optical signal-to-noise ratio of 50 dB and temperature sensitivity coefficient of 15.36 pm∕℃ for the heating process and 15.46 pm∕℃ for the cooling process. The lasing wavelength variation and power fluctuation at 700℃ are less than 0.02 nm and 0.21 dB, respectively. The RFBG-based fiber laser sensing has displayed good linearity for both the temperature rising and cooling processes, and favorable stability at high temperatures.展开更多
Using high aluminum refractory material as substrate at 1400℃, we studied the connections between several oxides such as Fe203, MnOv CuO, and the formation of defects such as coating crack, exfoliation, blistering, e...Using high aluminum refractory material as substrate at 1400℃, we studied the connections between several oxides such as Fe203, MnOv CuO, and the formation of defects such as coating crack, exfoliation, blistering, erosion, and fading away appeared in the application of high temperature infrared radiation coating. Analyses showed that thermal stress formed during the heating process due to the thermal expansion coefficient differential between the coating and the substrate, and volume effect caused by the crystal transferred when the temperature changed, which resulted in the coating crack and exfoliation. The gas produced by the reactions between components and binder or the components themselves during the heating process caused the coating blistering. The EMPA and XRD analyses show that oxides with low melting point in the penetrating area of the substrate may form eutectic with low melting point and produced thermal defects, which leads to the erosion by penetrating to the substrate. The valent changes of Fe2O3 and MnO2 during the heating process cause the volatilization of the oxides or the pulverization of the coatings, resulting in the coating fades away easily at high temperature for a long time.展开更多
The synthesis of diamond single crystal in the Fe64Ni36-C system with h-BN additive is investigated at pressure 6.5 GPa and temperature range of 1300-1400℃. The color of the obtained diamond crystals translates from ...The synthesis of diamond single crystal in the Fe64Ni36-C system with h-BN additive is investigated at pressure 6.5 GPa and temperature range of 1300-1400℃. The color of the obtained diamond crystals translates from yellow to dark green with increasing the h-BN addition. Fourier-transform infrared （FTIR） results indicate that sp2 hybridization B-N-B and B-N structures generate when the additive content reaches a certain value in the system. The two peaks are located at 745 and 1425cm-1, respectively. Fhrthermore, the FTIR characteristic peak resulting from nitrogen pairs is noticed and it tends to vanish when the h-BN addition reaches 1.1 wt%. Furthermore, Raman peak of the synthesized diamond shifts down to a lower wavenumber with increasing the h-BN ~ddition content in the synthesis system.展开更多
In as-cast Mg?2.1Gd?1.1Y?0.82Zn?0.11Zr(mole fraction,%)alloy,lamellar microstructures that extend from grain boundaries to the interior ofα-Mg grains are identified as clusters ofγ′using a scanning transmission ele...In as-cast Mg?2.1Gd?1.1Y?0.82Zn?0.11Zr(mole fraction,%)alloy,lamellar microstructures that extend from grain boundaries to the interior ofα-Mg grains are identified as clusters ofγ′using a scanning transmission electron microscope equipped with a high-angle annular dark-field detector.Under a total strain-controlled low-cyclic loading at573K,the mechanical response and failure mechanism of Mg?2.1Gd?1.1Y?0.82Zn?0.11Zr alloy(T6peak-aging heat treatment)were investigated.Results show that the alloy exhibits cyclic softening response at diverse total strain amplitudes and573K.The experimental observations using scanning electron microscopy show that the micro-cracks initiate preferentially at the interface between long-period stacking order structures andα-Mg matrix and extend along the basal plane ofα-Mg.The massive long-period stacking order structures distributed at grain boundaries impede the transgranular propagation of cracks.展开更多
The true stress-true strain curves of Ti-6Al-2Zr-IMO-IV alloy with hydrogen were obtained by hot compression test. The microstructures of the alloy before and after thermo-compression were observed. The apparent activ...The true stress-true strain curves of Ti-6Al-2Zr-IMO-IV alloy with hydrogen were obtained by hot compression test. The microstructures of the alloy before and after thermo-compression were observed. The apparent activation energies of deformation were calculated for the alloy with and without hydrogen. The behavior and mechanism of deformation for hydrogenated Ti-6A1-2Zr-IMO-IV alloy at high temperature were analyzed. The relationship between hydrogenation time and hydrogen content at 800 ℃ can be expressed as the equation： CH（t）=1.2-1.2exp（-t/120）. The true stress-true strain curves of hot compression for Ti-6Al-2Zr-IMO-IV alloy with hydrogen first move down and then move up as hydrogen content increases. Appropriate hydrogen content can reduce the peak of flow stress to minimal value. The apparent activation energies of deformation of the alloy with 0.47% hydrogen content and without hydrogen were calculated as 140 kJ·mol^-1 and 390 kJ-mol^-1, respectively, at 800 ℃ and at strain rate 8.3×10^4 s^-1. The apparent activation energy of deformation increases when the strain rate enhances from 8.3×10^-4 s^-1 to 8.3×10^-2 s^-1.展开更多
The hydrolysis of polyphenyl 1,2,4 triazine (As PPT) and polyphenyl 1,3,5 triazine (S PPT) in water at 250℃/ 3.97 MPa under nitrogen atmosphere has been investigated experimentally and theoretically. The hydr...The hydrolysis of polyphenyl 1,2,4 triazine (As PPT) and polyphenyl 1,3,5 triazine (S PPT) in water at 250℃/ 3.97 MPa under nitrogen atmosphere has been investigated experimentally and theoretically. The hydrolysis reactions were monitored by Fourier transform infrared (FT IR) and ultra violet visible (UV Vis) spectra. The results show that S PPT is remarkably stable whereas As PPT is easily hydrolyzed in water at 250℃. The identifications using FT IR, high performance liquid chromatography (HPLC), nuclear magnetic resonance ( 1H NMR) and mass spectrography (MS) confirm that terephthalic acid is the major hydrolysate of As PPT. Two model compounds, 2,5,6 triphenyltriazine and 2,4,6 triphenyltriazine, were designed to simulate the local electronic structures of As PPT and S PPT, respectively. The electronic structures were given by ab initio calculations at the RHF/4 31G level. The calculational results indicate that the triazine rings are the hydrolytically active parts and the 1,2,4 triazine ring is easier to hydrolyze in comparison with the 1,3,5 triazine ring under the same condition.展开更多
文摘A brief review is given about the friction and wear properties of high temperature alloys. Above a critical temperature, if the oxide becomes ductile, it will flow over the surface and prevent metal-to-metat contact. In order to study the tribology of oxide lubrication. a series of tests were carried out using Cu(ReO4)2 as a lubricant. The effects of time. Surface finish. substrates. load and temperature were investigated. A mechanism of lubrication is proposed in which the surface slip predominates along with mechanical attachment of oxide to the surface.
文摘The addition Of Pb enhances the hightemperature stability as well as theproportion of the high Tphase in Bi-Sr-Ca-Cu-O superconductor.The sample A with nominal composi-tion of BiSrCaCuOwas synthesized bySolid state reaction.It was sintered in airat 1153K for 24h,followed by annealingat 773K for 24h and furnace-cooling.The sample B with a nominal compositionof BiPbSrCaCuOwas prepared bymixing PbO with the powder ofBiSrCaCuOwhich had been prefired at1113K for 24h,pressing,sintering at
文摘Superior characteristics of Al Ga N-channel metal-insulator-semiconductor（MIS） high electron mobility transistors（HEMTs） at high temperatures are demonstrated in detail. The temperature coefficient of the maximum saturation drain current for the Al GaN-channel MIS HEMT can be reduced by 50% compared with the Ga N-channel HEMT. Moreover, benefiting from the better suppression of gate current and reduced leakage current in the buffer layer, the Al Ga N-channel MIS HEMT demonstrates an average breakdown electric field of 1.83 MV/cm at25℃ and 1.06 MV/cm at 300℃, which is almost 2 times and 3 times respectively larger than that of the reference Ga N-channel HEMT. Pulsed mode analyses suggest that the proposed device suffers from smaller current collapse when the temperature reaches as high as 300℃.
文摘We analyze the line data from solar flares to present evidence for the emission spectrum of the recently discussed electron-proton pairs at high temperatures. We also point out that since the pairing phenomenon provides an additional source for these lines—the conventional source being the highly ionized high-Z atoms already existing in the solar atmosphere, we have a plausible explanation of the FIP effect.
基金supported by the Beijing Outstanding Talent Training Funded Project(No.2015000020124G074)the 111 Project(No.D17021)the Changjiang Scholars and Innovative Research Team in University(No.IRT_16R07)
文摘Thermally regenerated low-reflectivity fiber Bragg gratings（RFBGs）, as one mirror of a resonant cavity, have been introduced as linear-cavity fiber lasers combining with fiber saturable absorbers. The output of lasing presents an optical signal-to-noise ratio of 50 dB and temperature sensitivity coefficient of 15.36 pm∕℃ for the heating process and 15.46 pm∕℃ for the cooling process. The lasing wavelength variation and power fluctuation at 700℃ are less than 0.02 nm and 0.21 dB, respectively. The RFBG-based fiber laser sensing has displayed good linearity for both the temperature rising and cooling processes, and favorable stability at high temperatures.
基金Funded by the National Natural Science Foundation of China(Nos.51272195 and 51202175)the Research Funds for the Central Universities(2012-Ia-012,2012-IV-105,2013-ZD-4)
文摘Using high aluminum refractory material as substrate at 1400℃, we studied the connections between several oxides such as Fe203, MnOv CuO, and the formation of defects such as coating crack, exfoliation, blistering, erosion, and fading away appeared in the application of high temperature infrared radiation coating. Analyses showed that thermal stress formed during the heating process due to the thermal expansion coefficient differential between the coating and the substrate, and volume effect caused by the crystal transferred when the temperature changed, which resulted in the coating crack and exfoliation. The gas produced by the reactions between components and binder or the components themselves during the heating process caused the coating blistering. The EMPA and XRD analyses show that oxides with low melting point in the penetrating area of the substrate may form eutectic with low melting point and produced thermal defects, which leads to the erosion by penetrating to the substrate. The valent changes of Fe2O3 and MnO2 during the heating process cause the volatilization of the oxides or the pulverization of the coatings, resulting in the coating fades away easily at high temperature for a long time.
基金Supported by the National Natural Science Foundation of China under Grant No 51172089the Natural Science Foundation of Guizhou Province Education Department under Grant No KY[2013]183the Natural Science Foundation of Guizhou Province Science and Technology Agency under Grant Nos LH[2015]7232 and LH[2015]7228
文摘The synthesis of diamond single crystal in the Fe64Ni36-C system with h-BN additive is investigated at pressure 6.5 GPa and temperature range of 1300-1400℃. The color of the obtained diamond crystals translates from yellow to dark green with increasing the h-BN addition. Fourier-transform infrared （FTIR） results indicate that sp2 hybridization B-N-B and B-N structures generate when the additive content reaches a certain value in the system. The two peaks are located at 745 and 1425cm-1, respectively. Fhrthermore, the FTIR characteristic peak resulting from nitrogen pairs is noticed and it tends to vanish when the h-BN addition reaches 1.1 wt%. Furthermore, Raman peak of the synthesized diamond shifts down to a lower wavenumber with increasing the h-BN ~ddition content in the synthesis system.
基金Project(2015TP1035)supported by the Science and Technology Planning Project of Hunan Province,ChinaProject(531107040183)supported by the Fundamental Research Funds for the Central Universities,China
文摘In as-cast Mg?2.1Gd?1.1Y?0.82Zn?0.11Zr(mole fraction,%)alloy,lamellar microstructures that extend from grain boundaries to the interior ofα-Mg grains are identified as clusters ofγ′using a scanning transmission electron microscope equipped with a high-angle annular dark-field detector.Under a total strain-controlled low-cyclic loading at573K,the mechanical response and failure mechanism of Mg?2.1Gd?1.1Y?0.82Zn?0.11Zr alloy(T6peak-aging heat treatment)were investigated.Results show that the alloy exhibits cyclic softening response at diverse total strain amplitudes and573K.The experimental observations using scanning electron microscopy show that the micro-cracks initiate preferentially at the interface between long-period stacking order structures andα-Mg matrix and extend along the basal plane ofα-Mg.The massive long-period stacking order structures distributed at grain boundaries impede the transgranular propagation of cracks.
基金supported by the National Natural Science Foundation of China(No.50671028)
文摘The true stress-true strain curves of Ti-6Al-2Zr-IMO-IV alloy with hydrogen were obtained by hot compression test. The microstructures of the alloy before and after thermo-compression were observed. The apparent activation energies of deformation were calculated for the alloy with and without hydrogen. The behavior and mechanism of deformation for hydrogenated Ti-6A1-2Zr-IMO-IV alloy at high temperature were analyzed. The relationship between hydrogenation time and hydrogen content at 800 ℃ can be expressed as the equation： CH（t）=1.2-1.2exp（-t/120）. The true stress-true strain curves of hot compression for Ti-6Al-2Zr-IMO-IV alloy with hydrogen first move down and then move up as hydrogen content increases. Appropriate hydrogen content can reduce the peak of flow stress to minimal value. The apparent activation energies of deformation of the alloy with 0.47% hydrogen content and without hydrogen were calculated as 140 kJ·mol^-1 and 390 kJ-mol^-1, respectively, at 800 ℃ and at strain rate 8.3×10^4 s^-1. The apparent activation energy of deformation increases when the strain rate enhances from 8.3×10^-4 s^-1 to 8.3×10^-2 s^-1.
基金the National Natural Science Foundationof China(No.2 97730 2 4 )
文摘The hydrolysis of polyphenyl 1,2,4 triazine (As PPT) and polyphenyl 1,3,5 triazine (S PPT) in water at 250℃/ 3.97 MPa under nitrogen atmosphere has been investigated experimentally and theoretically. The hydrolysis reactions were monitored by Fourier transform infrared (FT IR) and ultra violet visible (UV Vis) spectra. The results show that S PPT is remarkably stable whereas As PPT is easily hydrolyzed in water at 250℃. The identifications using FT IR, high performance liquid chromatography (HPLC), nuclear magnetic resonance ( 1H NMR) and mass spectrography (MS) confirm that terephthalic acid is the major hydrolysate of As PPT. Two model compounds, 2,5,6 triphenyltriazine and 2,4,6 triphenyltriazine, were designed to simulate the local electronic structures of As PPT and S PPT, respectively. The electronic structures were given by ab initio calculations at the RHF/4 31G level. The calculational results indicate that the triazine rings are the hydrolytically active parts and the 1,2,4 triazine ring is easier to hydrolyze in comparison with the 1,3,5 triazine ring under the same condition.
